Withdrawn and superseded ISO standards — page 117 of 246

10059,IS,,ISO 4250-1:1988,Narrow and wide base off-road tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes à base étroite et à base large pour engins de génie civil — Partie 1: Désignation et cotes des pneumatiques,1988-03-10,1,['83.160.30'],ISO/TC 31/SC 6,9599,[10058],"[20800,23722]","['en','fr']",6,

10060,IS,Amd,ISO 4250-1:1988/Amd 1:1990,Narrow and wide base off-road tyres and rims — Part 1: Tyre designation and dimensions — Amendment 1,Pneumatiques et jantes à base étroite et à base large pour engins de génie civil — Partie 1: Désignation et cotes des pneumatiques — Amendement 1,1990-12-06,1,['83.160.30'],ISO/TC 31/SC 6,9599,,"[20800,23722]","['en','fr']",4,

20800,IS,,ISO 4250-1:1994,Earth-mover tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes pour engins de terrassement — Partie 1: Désignation et cotes des pneumatiques,1994-07-28,2,['83.160.99'],ISO/TC 31/SC 6,9599,"[10059,10060]",[23722],"['en','fr']",10,

23722,IS,,ISO 4250-1:1996,Earth-mover tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes pour engins de terrassement — Partie 1: Désignation et cotes des pneumatiques,1996-12-12,3,['83.160.99'],ISO/TC 31/SC 6,9599,"[10059,10060,20800]",[39245],"['en','fr']",16,<p>Technical elements relating to designation and dimensions of tyres and rims for earth-movers. It also contains load tables for these tyres.</p>

39245,IS,,ISO 4250-1:2006,Earth-mover tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes pour engins de terrassement — Partie 1: Désignation et cotes des pneumatiques,2006-08-16,4,['83.160.99'],ISO/TC 31/SC 6,9599,[23722],[59951],"['en','fr']",20,"<p>ISO 4250-1:2006 specifies designations and dimensions for earth-mover tyres, and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165.</p>"

59951,IS,,ISO 4250-1:2014,Earth-mover tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes pour engins de terrassement — Partie 1: Désignation et cotes des pneumatiques,2014-05-23,5,['83.160.99'],ISO/TC 31/SC 6,9599,[39245],[69614],"['en','fr']",26,<p>ISO 4250-1:2014 specifies designations and dimensions for earth-mover tyres and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165.</p>

69614,IS,,ISO 4250-1:2017,Earth-mover tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes pour engins de terrassement — Partie 1: Désignation et cotes des pneumatiques,2017-11-06,6,['83.160.99'],ISO/TC 31/SC 6,9599,[59951],[80530],"['en','fr']",23,<p>ISO 4250-1:2017 specifies designations and dimensions for earth-mover tyres and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165.</p><p>The ISO 4250 series consists of three parts which specify the technical elements relating to designation and dimensions of tyres and rims for earth-movers; it also gives load tables for these tyres.</p>

10061,IS,,ISO 4250-2:1987,Narrow and wide base off-road tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes à base étroite et à base large pour engins de génie civil — Partie 2: Charges et pressions de gonflage,1987-12-03,1,['83.160.99'],ISO/TC 31/SC 6,9599,,[10062],['en'],,

10062,IS,,ISO 4250-2:1991,Narrow and wide base off-road tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes à base étroite et à base large pour engins de génie civil — Partie 2: Charges et pressions de gonflage,1991-03-28,2,['83.160.30'],ISO/TC 31/SC 6,9599,"[10061,10058]",[20656],"['en','fr']",10,

20656,IS,,ISO 4250-2:1995,Earth-mover tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes pour engins de terrassement — Partie 2: Charges et pressions de gonflage,1995-09-28,3,['83.160.99'],ISO/TC 31/SC 6,9599,[10062],[39244],"['en','fr']",13,"<p>Gives definitions of masses, operating conditions and load cycles, and defines tyre loads and reference inflation pressures for narrow and wide base tyres primarily used for earth-mover machines. Cancels and replaces the second edition, which has been technically revised.</p>"

26722,IS,Amd,ISO 4250-2:1995/Amd 1:1997,Earth-mover tyres and rims — Part 2: Loads and inflation pressures — Amendment 1: Loads and inflation pressures,Pneumatiques et jantes pour engins de terrassement — Partie 2: Charges et pressions de gonflage — Amendement 1: Charges et pressions de gonflage,1997-05-29,3,['83.160.99'],ISO/TC 31/SC 6,9599,,[39244],"['en','fr']",2,

39244,IS,,ISO 4250-2:2006,Earth-mover tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes pour engins de terrassement — Partie 2: Charges et pressions de gonflage,2006-08-16,4,['83.160.99'],ISO/TC 31/SC 6,9599,"[26722,20656]",[59950],"['en','fr']",22,"<p>ISO 4250-2:2006 gives working definitions of masses and load cycles, and specifies tyre loads and reference inflation pressures for narrow and wide base tyres primarily intended for earth-mover machines.</p>"

59950,IS,,ISO 4250-2:2014,Earth-mover tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes pour engins de terrassement — Partie 2: Charges et pressions de gonflage,2014-05-23,5,['83.160.99'],ISO/TC 31/SC 6,9599,[39244],[69615],"['en','fr']",25,"<p>ISO 4250-2:2014 gives working definitions of masses and load cycles, and specifies tyre loads and reference inflation pressures for narrow- and wide-base tyres primarily intended for earth-mover machines.</p>"

69615,IS,,ISO 4250-2:2017,Earth-mover tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes pour engins de terrassement — Partie 2: Charges et pressions de gonflage,2017-08-11,6,['83.160.99'],ISO/TC 31/SC 6,9599,[59950],[80531],"['en','fr']",26,<p>The ISO 4250 series consists of three parts laying down the technical designation and dimensions of tyres and rims for earth-movers; it also gives load tables for these tyres.</p><p>ISO 4250-2:2017 gives working definitions of masses and load cycles and specifies tyre loads and reference inflation pressures for narrow- and wide-base tyres primarily intended for earth-mover machines.</p>

10063,IS,,ISO 4250-3:1987,Narrow and wide base off-road tyres and rims — Part 3: Rims,Pneumatiques et jantes à base étroite et à base large pour engins de génie civil — Partie 3: Jantes,1987-12-03,1,['53.100'],ISO/TC 31/SC 6,9599,[10058],[20655],"['en','fr']",7,

20655,IS,,ISO 4250-3:1997,Earth-mover tyres and rims — Part 3: Rims,Pneumatiques et jantes pour engins de terrassement — Partie 3: Jantes,1997-10-16,2,['53.100'],ISO/TC 31/SC 6,9599,[10063],[39243],"['en','fr']",11,

39243,IS,,ISO 4250-3:2006,Earth-mover tyres and rims — Part 3: Rims,Pneumatiques et jantes pour engins de terrassement — Partie 3: Jantes,2006-08-16,3,['53.100'],ISO/TC 31/SC 6,9599,[20655],[54744],"['en','fr']",13,"<p>ISO 4250-3:2006 sets out the designation, contours and dimensions for rims for narrow and wide base off-road tyres primarily intended for earth-moving machinery. All dimensions are given in millimetres and are applicable to the side of the rim which is in contact with the tyre.</p>"

54744,IS,,ISO 4250-3:2011,Earth-mover tyres and rims — Part 3: Rims,Pneumatiques et jantes pour engins de terrassement — Partie 3: Jantes,2011-04-28,4,['53.100'],ISO/TC 31/SC 6,9599,[39243],"[77352,65230]","['en','fr']",13,"<p>ISO 4250-3:2011 sets out the designation, contours and dimensions for rims for narrow- and wide-base off-road tyres primarily intended for earth-moving machinery.</p><p>All dimensions in ISO 4250-3:2011 are given in millimetres and are applicable to the side of the rim which is in contact with the tyre.</p><p>Annex A gives details on sealing ring grooves and O-rings for earth-mover rims.</p>"

10064,IS,,ISO 4251-1:1984,Tyres and rims (existing series) for agricultural tractors and machines — Part 1: Tyre designation and dimensions,Pneus et jantes (séries existantes) pour tracteurs et machines agricoles — Partie 1: Désignation et dimensions des pneumatiques,1984-12-01,2,['83.160.30'],ISO/TC 31/SC 5,9599,,[10065],['en'],8,

10065,IS,,ISO 4251-1:1988,Tyres and rims (existing series) for agricultural tractors and machines — Part 1: Tyre designation and dimensions,Pneus et jantes (séries existantes) pour tracteurs et machines agricoles — Partie 1: Désignation et cotes des pneumatiques,1988-03-10,3,['83.160.30'],ISO/TC 31/SC 5,9599,[10064],[10066],"['en','fr']",8,

10066,IS,,ISO 4251-1:1992,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions,Pneumatiques (série à marquage 'ply rating') et jantes pour tracteurs et machines agricoles — Partie 1: Désignation et cotes des pneumatiques,1992-10-01,4,['83.160.30'],ISO/TC 31/SC 5,9599,[10065],[21444],"['en','fr']",9,

21444,IS,,ISO 4251-1:1998,"Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours","Pneumatiques (série à marquage 'équivalent nappes') et jantes pour tracteurs et machines agricoles — Partie 1: Désignation et cotes des pneumatiques, et profils de jantes approuvés",1998-09-10,5,['83.160.30'],ISO/TC 31/SC 5,9599,[10066],[39036],"['en','fr']",12,

39036,IS,,ISO 4251-1:2005,"Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours",Pneumatiques (série à marquage 'équivalent nappes') et jantes pour tracteurs et machines agricoles — Partie 1: Désignation et cotes des pneumatiques et profils de jantes approuvés,2005-09-06,6,['83.160.30'],ISO/TC 31/SC 5,9599,[21444],[63452],"['en','fr']",19,"<p>ISO 4251-1:2005 establishes the designation in use and the dimensions of the ply rating marked series of tyres for agricultural tractors and machines.</p><p>Tyre load ratings, rim dimensions, and tyre classification and nomenclature are given in ISO 4251-2,

46489,IS,Amd,ISO 4251-1:2005/Amd 1:2012,"Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours — Amendment 1",Pneumatiques (série à marquage 'équivalent nappes') et jantes pour tracteurs et machines agricoles — Partie 1: Désignation et cotes des pneumatiques et profils de jantes approuvés — Amendement 1,2012-01-16,6,['83.160.30'],ISO/TC 31/SC 5,9599,,[63452],"['en','fr']",8,

63452,IS,,ISO 4251-1:2017,"Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours",Pneumatiques (série à marquage équivalent nappes) et jantes pour tracteurs et machines agricoles — Partie 1: Désignation et cotes des pneumatiques et profils de jantes approuvés,2017-04-03,7,['83.160.30'],ISO/TC 31/SC 5,9599,"[46489,39036]",[73654],"['en','fr']",21,<p>ISO 4251-1:2017 establishes the designation in use and the dimensions of the ply rating marked series of tyres for agricultural tractors and machines.</p><p>Tyre load ratings are given in ISO 4251‑2.</p>

53461,IS,,ISO 4251-2:1980,Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings,Pneus et jantes (séries existantes) pour tracteurs et machines agricoles — Partie 2: Capacités de charge des pneumatiques,1980-08-01,1,,ISO/TC 31/SC 5,9599,,[10067],"['en','fr']",6,

10069,IS,Add,ISO 4251-2:1980/Add 1:1981,Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings — Addendum 1,Pneus et jantes (séries existantes) pour tracteurs et machines agricoles — Partie 2: Capacités de charge des pneumatiques — Additif 1,1981-11-01,1,['83.160.30'],ISO/TC 31,9599,,[10067],['en'],1,

10070,IS,Add,ISO 4251-2:1980/Add 2:1982,Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings — Addendum 2,Pneus et jantes (séries existantes) pour tracteurs et machines agricoles — Partie 2: Capacités de charge des pneumatiques — Additif 2,1982-02-01,1,['83.160.30'],ISO/TC 31,9599,,[10067],['en'],2,

10067,IS,,ISO 4251-2:1984,Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings,Pneus et jantes (séries existantes) pour tracteurs et machines agricoles — Partie 2: Capacités de charge des pneumatiques,1984-12-01,2,['83.160.30'],ISO/TC 31/SC 5,9599,"[10070,53461,10069]",[10068],"['en','fr']",7,

10068,IS,,ISO 4251-2:1987,Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings,Pneus et jantes (séries existantes) pour tracteurs et machines agricoles — Partie 2: Capacités de charge des pneumatiques,1987-11-26,3,['83.160.30'],ISO/TC 31/SC 5,9599,[10067],[10071],"['en','fr']",7,

10071,IS,,ISO 4251-2:1992,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings,Pneumatiques (série à marquage 'ply rating') et jantes pour tracteurs et machines agricoles — Partie 2: Capacités de charge des pneumatiques,1992-10-08,4,['83.160.30'],ISO/TC 31/SC 5,9599,[10068],[23123],"['en','fr']",11,

23123,IS,,ISO 4251-2:1998,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings,Pneumatiques (série à marquage équivalent nappes) et jantes pour tracteurs et machines agricoles — Partie 2: Capacités de charge des pneumatiques,1998-12-17,5,['83.160.30'],ISO/TC 31/SC 5,9599,[10071],[39037],"['en','fr']",11,

39037,IS,,ISO 4251-2:2005,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings,Pneumatiques (série à marquage 'équivalent nappes') et jantes pour tracteurs et machines agricoles — Partie 2: Capacités de charge des pneumatiques,2005-09-06,6,['83.160.30'],ISO/TC 31/SC 5,9599,[23123],[63453],"['en','fr']",19,"<p>ISO 4251-2:2005 specifies load ratings for the ply rating marked series of tyres for agricultural tractors and machines.</p><p>Tyre designation and dimensions, and approved rim contours, rim dimensions, and tyre classification and nomenclature are given in ISO 4251-1, ISO 4251-3 and ISO 4251-4 respectively.</p>"

57263,IS,Amd,ISO 4251-2:2005/Amd 1:2011,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings — Amendment 1,Pneumatiques (série à marquage 'équivalent nappes') et jantes pour tracteurs et machines agricoles — Partie 2: Capacités de charge des pneumatiques — Amendement 1,2011-12-14,6,['83.160.30'],ISO/TC 31/SC 5,9599,,[63453],"['en','fr']",3,

63453,IS,,ISO 4251-2:2017,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings,Pneumatiques (série à marquage équivalent nappes) et jantes pour tracteurs et machines agricoles — Partie 2: Capacités de charge des pneumatiques,2017-04-03,7,['83.160.30'],ISO/TC 31/SC 5,9599,"[39037,57263]",[73655],"['en','fr']",17,"<p>ISO 4251-2:2017 establishes the load ratings of the ply rating marked series of tyres for agricultural tractors and machines.</p><p>Tyre designation and dimensions, and approved rim contours are given in ISO 4251‑1.</p>"

10072,IS,,ISO 4251-3:1980,Tyres and rims (Existing series) for agricultural tractors and machines — Part 3: Rims,Pneus et jantes (Séries existantes) pour tracteurs et machines agricoles — Partie 3: Jantes,1980-09-01,1,['65.060.01'],ISO/TC 31,9599,,[10073],"['en','fr']",9,

10075,IS,Amd,ISO 4251-3:1980/Amd 1:1982,Tyres and rims (Existing series) for agricultural tractors and machines — Part 3: Rims — Amendment 1,Pneus et jantes (Séries existantes) pour tracteurs et machines agricoles — Partie 3: Jantes — Amendement 1,1982-10-01,1,['65.060.01'],ISO/TC 31,9599,,"[10073,10076]",['en'],1,

10073,IS,,ISO 4251-3:1985,Tyres and rims (existing series) for agricultural tractors and machines — Part 3: Rims,Pneus et jantes (séries existantes) pour tracteurs et machines agricoles — Partie 3: Jantes,1985-02-28,2,['65.060'],ISO/TC 31/SC 5,9599,"[10075,10072]",[10076],"['en','fr']",12,

10076,IS,,ISO 4251-3:1994,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 3: Rims,Pneumatiques (série à marquage 'ply rating') et jantes pour tracteurs et machines agricoles — Partie 3: Jantes,1994-10-20,3,['65.060.01'],ISO/TC 31/SC 5,9599,"[10073,10075]",[39038],"['en','fr']",14,<p>Cancels and replaces the second edition (1985). Sets out rim dimensions for tyres of the ply rating marked series for agricultural tractors and machines.</p>

39038,IS,,ISO 4251-3:2006,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 3: Rims,Pneumatiques (série à marquage 'équivalent nappes') et jantes pour tracteurs et machines agricoles — Partie 3: Jantes,2006-07-13,4,['83.160.30'],ISO/TC 31/SC 5,9599,[10076],"[63454,62931]","['en','fr']",18,<p>ISO 4251-3:2006 specifies rim dimensions for the ply rating marked series of tyres for agricultural tractors and machines.</p>

10077,IS,,ISO 4251-4:1980,Tyres and rims (Existing series) for agricultural tractors and machines — Part 4: Tyres classification and nomenclature,Pneus et jantes (séries existantes) pour tracteurs et machines agricoles — Partie 4: Nomenclature et classification des pneumatiques,1980-04-01,1,['83.160.30'],ISO/TC 31/SC 5,9599,,[10078],"['en','fr']",1,

10078,IS,,ISO 4251-4:1992,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 4: Tyre classification and nomenclature,Pneumatiques (série à marquage 'ply rating') et jantes pour tracteurs et machines agricoles — Partie 4: Nomenclature et classification des pneumatiques,1992-03-12,2,['83.160.30'],ISO/TC 31/SC 5,9599,[10077],[46502],"['en','fr']",2,"<p>Tabulates the classification codes R (R-1 to R-4), F (F-1 to F-3), I (I-1 to I-6), G (G-1 to G-3) and LS (LS-2 and LS-3).</p>"

10079,IS,,ISO 4251-5:1988,Tyres and rims (existing series) for agricultural tractors and machines — Part 5: Log skidder tyres,Pneus et jantes (séries existantes) pour tracteurs et machines agricoles — Partie 5: Pneumatiques pour engins forestiers traînant des grumes,1988-05-12,1,['83.160.30'],ISO/TC 31/SC 5,9599,,[10080],['en'],3,

10080,IS,,ISO 4251-5:1992,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 5: Logging and forestry service tyres,Pneumatiques (série à marquage 'ply rating') et jantes pour tracteurs et machines agricoles — Partie 5: Pneumatiques pour engins forestiers et de débardage du bois,1992-03-12,2,['83.160.30'],ISO/TC 31/SC 5,9599,[10079],[73763],"['en','fr']",3,"<p>Describes the designation, dimensions, load ratings and rim coordination for tyres of diagonal construction. Gives terms and definitions.</p>"

26795,IS,Amd,ISO 4251-5:1992/Amd 1:1998,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 5: Logging and forestry service tyres — Amendment 1,Pneumatiques (série à marquage 'ply rating') et jantes pour tracteurs et machines agricoles — Partie 5: Pneumatiques pour engins forestiers et de débardage du bois — Amendement 1,1998-09-10,2,['83.160.30'],ISO/TC 31/SC 5,9599,,[73763],"['en','fr']",1,

10081,IS,,ISO 4252:1983,"Agricultural tractors — Access, exit and the operator's workplace — Dimensions","Tracteurs agricoles — Accès, sortie et poste de travail du conducteur — Dimensions",1983-12-01,1,['65.060.10'],ISO/TC 23/SC 3,9599,,[10082],"['en','fr']",5,

10082,IS,,ISO 4252:1992,"Agricultural tractors — Operator's workplace, access and exit — Dimensions","Tracteurs agricoles — Poste de travail de l'opérateur, accès et sortie — Dimensions",1992-12-03,2,['65.060.10'],ISO/TC 23/SC 4,9599,[10081],[39270],"['en','fr']",4,"<p>Specifies design dimensions concerning minimum dimensions of access doorways; number, location and minimum dimensions of emergency exits; minimum internal clearance dimensions. Applies to tractors for agriculture having a minimum track width exceeding 1150 mm.</p>"

10083,IS,,ISO 4253:1977,Agricultural tractors — Operator's seating accommodation — Dimensions,Tracteurs agricoles — Poste de conduite pour conducteur assis — Dimensions,1977-07-01,1,['65.060.10'],ISO/TC 23/SC 3,9599,,[10084],"['en','fr']",2,

10086,IS,,ISO 4254-1:1985,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 1: General,Tracteurs et matériels agricoles et forestiers — Dispositifs techniques permettant d'assurer la sécurité — Partie 1: Généralités,1985-12-12,1,['65.060.01'],ISO/TC 23/SC 3,9599,,[10087],"['en','fr']",,

10087,IS,,ISO 4254-1:1989,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 1: General,Tracteurs et matériels agricoles et forestiers — Dispositifs techniques permettant d'assurer la sécurité — Partie 1: Généralités,1989-11-23,2,['65.060.01'],ISO/TC 23/SC 3,9599,[10086],[36421],"['en','fr']",10,"<p>Provides guidelines regarding the prevention of accidents arising from the use fo tractors and machinery. Gives guidelines to be met when designing tractors and machines. Specifies technical means of improving the degree of personal safety of operators and others involved in the course of normal running, maintenance and use.</p>"

26862,IS,Amd,ISO 4254-1:1989/Amd 1:1998,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 1: General — Amendment 1,Tracteurs et matériels agricoles et forestiers — Dispositifs techniques permettant d'assurer la sécurité — Partie 1: Généralités — Amendement 1,1998-07-30,2,['65.060.01'],ISO/TC 23/SC 3,9599,,[36421],"['en','fr']",1,

36421,IS,,ISO 4254-1:2005,Agricultural machinery — Safety — Part 1: General requirements,Matériel agricole — Sécurité — Partie 1: Exigences générales,2005-07-27,3,['65.060.01'],ISO/TC 23/SC 3,9599,"[26862,10087]",[50703],"['en','fr']",33,"<p>ISO 4254-1:2005 specifies general safety requirements, and their verification, for the design and construction of all kinds of agricultural self-propelled ride-on machines and mounted, semi-mounted or trailed machines, excluding tractors, aircraft, air-cushion vehicles and lawn and garden equipment. In addition, it specifies the type of information on safe work practices (including residual risks) to be provided by the manufacturer. It deals with signifi

50703,IS,,ISO 4254-1:2008,Agricultural machinery — Safety — Part 1: General requirements,Matériel agricole — Sécurité — Partie 1: Exigences générales,2008-04-16,4,['65.060.01'],ISO/TC 23/SC 3,9599,"[36421,44694]",[55910],"['en','fr']",35,"<p>ISO 4254-1:2008 specifies the general safety requirements and their verification for the design and construction of self-propelled ride-on machines and mounted, semi-mounted or trailed machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. </p><p>ISO 4254-1:2008 deals with significant hazards (as listed in Annex A), hazardous situations and e

53704,IS,,ISO 4254-13:2012,Agricultural machinery — Safety — Part 13: Large rotary mowers,Matériel agricole — Sécurité — Partie 13: Grandes faucheuses rotatives,2012-08-08,1,['65.060.01'],ISO/TC 23/SC 7,9599,,[79825],"['en','fr']",36,"<p>ISO 4254-13:2012, when used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of towed, semi-mounted, or mounted large rotary mowers with single or multiple cutting elements which have a cutting diameter of 1 000 mm or greater for any single cutting element assembly, mounted on a propelling tractor or machine, intended for agricultural mowing equipment and designed for shredding crop residue, g

10089,IS,,ISO 4254-3:1992,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 3: Tractors,Tracteurs et matériels agricoles et forestiers — Dispositifs techniques permettant d'assurer la sécurité — Partie 3: Tracteurs,1992-02-19,1,['65.060.10'],ISO/TC 23/SC 4,9599,,"[40090,50968]","['en','fr']",5,<p>Provides guidelines regarding the prevention of accidents arising from the use of tractors and indicates appropriate parameters to be met when designing tractors.</p>

10090,IS,,ISO 4254-4:1990,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 4: Forestry winches,Tracteurs et matériels agricoles et forestiers — Dispositifs techniques permettant d'assurer la sécurité — Partie 4: Treuils pour matériels forestier et de sylviculture,1990-11-15,1,['65.060.80'],ISO/TC 23/SC 15,9599,,"[39208,32862]","['en','fr']",3,<p>Specifies safety requirements for winches used on forestry machinery and agricultural machinery used in forestry. Applies only to skidding winches mounted on mobile forestry machinery; winches used in cable logging systems are excluded.</p>

10091,IS,,ISO 4254-5:1992,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 5: Power-driven soil-working equipment,Tracteurs et matériels agricoles et forestiers — Dispositifs techniques permettant d'assurer la sécurité — Partie 5: Matériel de travail du sol à entraînement mécanique,1992-02-19,1,['65.060.20'],ISO/TC 23/SC 3,9599,,[38005],"['en','fr']",2,<p>Specifies the special requirements to be met in design. Applies to equipment of class 03 with a power demand of more than 20 kW. Applies additionally to ISO 4254-1.</p>

38005,IS,,ISO 4254-5:2008,Agricultural machinery — Safety — Part 5: Power-driven soil-working machines,Matériel agricole — Sécurité — Partie 5: Machines de travail du sol à outils animés,2008-08-26,2,['65.060.20'],ISO/TC 23/SC 3,9599,[10091],[64878],"['en','fr']",14,"<p>ISO 4254-5:2008, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed power-driven soil‑working machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.</p>"

10092,IS,,ISO 4254-6:1995,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 6: Equipment for crop protection,Tracteurs et matériels agricoles et forestiers — Dispositifs techniques permettant d'assurer la sécurité — Partie 6: Matériel de protection des cultures,1995-11-23,1,['65.060.40'],ISO/TC 23/SC 6,9599,,[38060],"['en','fr']",3,<p>Specifies special requirements to be considered when designing power-assisted sprayers for crop protection and liquid fertilizer application. The requirements specified are supplementary to those in ISO 4254-1.</p>

38060,IS,,ISO 4254-6:2009,Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors,Matériel agricole — Sécurité — Partie 6: Pulvérisateurs et distributeurs d'engrais liquides,2009-09-08,2,['65.060.40'],ISO/TC 23/SC 6,9599,[10092],[70623],"['en','fr']",15,"<p>ISO 4254-6:2009, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed and self-propelled agricultural sprayers for use with pesticide products and liquid fertilizer application, designed for use by one operator only. In addition, it specifies the type of information on safe working practices (including

10093,IS,,ISO 4254-7:1995,"Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 7: Combine harvesters, forage and cotton harvesters","Tracteurs et matériels agricoles et forestiers — Dispositifs techniques permettant d'assurer la sécurité — Partie 7: Moissonneuses-batteuses, récolteuses-hacheuses-chargeuses de fourrage et récolteuses de coton",1995-01-26,1,['65.060.50'],ISO/TC 23/SC 7,9599,,[35162],"['en','fr']",7,"<p>Specifies technical means for ensuring the safety of operators and others involved in the course of normal running, maintenance and the use of combine harvesters and self-propelled forage and cotton harvesters additional to the requir

35162,IS,,ISO 4254-7:2008,"Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters","Matériel agricole — Sécurité — Partie 7: Moissonneuses-batteuses, récolteuses-hacheuses-chargeuses de fourrage et récolteuses de coton",2008-10-22,2,['65.060.50'],ISO/TC 23/SC 7,9599,[10093],[63392],"['en','fr']",46,"<p>ISO 4254-7:2008, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of combine harvesters, forage harvesters and cotton harvesters. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the o

44446,IS,,ISO 4254-8:2009,Agricultural machinery — Safety — Part 8: Solid fertilizer distributors,Matériel agricole — Sécurité — Partie 8: Distributeurs d'engrais solides,2009-07-30,1,['65.060.25'],ISO/TC 23/SC 3,9599,,[64879],"['en','fr']",16,"<p>ISO 4254-8:2009, used together with ISO 4254-1, specifies safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled solid fertilizer distributors for solid fertilizer application, i.e. full‑width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors, as well as solid fertilizer distributors driven by an auxiliary eng

10095,IS,,ISO 4254-9:1992,"Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 9: Equipment for sowing, planting and distributing fertilizers","Tracteurs et matériels agricoles et forestiers — Dispositifs techniques permettant d'assurer la sécurité — Partie 9: Matériel de semis, de plantation et de fertilisation",1992-02-19,1,"['65.060.30','65.060.25']",ISO/TC 23/SC 3,9599,,"[38006,44448]","['en','fr']",4,<p>Specifies technical means of improving the degree of personal safety of operators and others. Applies additionally to ISO 4254-1.</p>

44448,IS,,ISO 4254-9:2008,Agricultural machinery — Safety — Part 9: Seed drills,Matériel agricole — Sécurité — Partie 9: Semoirs,2008-10-22,2,['65.060.30'],ISO/TC 23/SC 3,9599,[10095],[64880],"['en','fr']",18,"<p>ISO 4254-9:2008, used together with ISO 4254-1, specifies the safety requirements, and their verification for design and construction, of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, used in agriculture and horticulture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.</p><p>When requirements of ISO 4254-9:2

10096,IS,,ISO 4256:1978,Liquefied petroleum gases — Determination of vapour pressure — LPG method,Gaz de pétrole liquéfiés — Détermination de la pression de vapeur — Méthode GPL,1978-11-01,1,['75.160.30'],ISO/TC 28,9599,,[24656],"['en','fr']",6,

10097,IS,,ISO 4257:1988,Liquefied petroleum gases — Method of sampling,Gaz de pétrole liquéfiés — Méthode d'échantillonnage,1988-12-29,1,['75.160.30'],ISO/TC 28/SC 2,9599,,[23699],"['en','fr']",4,"<p>Procedure given applies to gases, such as propane, butane or mixtures thereof. It is suitable for sampling into containers to provide samples for laboratory testing of products covered by ISO 9162. Although this procedures can be used to provide samples for compositional analysis, it is strongly recommended that alternative apparatus, such as a variable-volume container, be used to minimize compositional changes that may occur.</p>"

65236,IS,,ISO 4259-1:2017,Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test,Produits pétroliers et connexes — Fidélité des méthodes de mesure et de leurs résultats — Partie 1: Détermination des valeurs de fidélité relatives aux méthodes d'essai,2017-11-01,1,['75.080'],ISO/TC 28,9599,[38211],[89055],"['en','fr']",75,"<p>ISO 4259-1:2017 specifies the methodology for the design of an Interlaboratory Study (ILS) and calculation of precision estimates of a test method specified by the study. In particular, it defines the relevant statistical terms (Clause 3), the procedures to be adopted in the pl

76099,IS,Amd,ISO 4259-1:2017/Amd 1:2019,Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test — Amendment 1,Produits pétroliers et connexes — Fidélité des méthodes de mesure et de leurs résultats — Partie 1: Détermination des valeurs de fidélité relatives aux méthodes d'essai — Amendement 1,2019-09-06,1,['75.080'],ISO/TC 28,9599,,[89055],"['en','fr']",4,

80009,IS,Amd,ISO 4259-1:2017/Amd 2:2020,Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test — Amendment 2,Produits pétroliers et connexes — Fidélité des méthodes de mesure et de leurs résultats — Partie 1: Détermination des valeurs de fidélité relatives aux méthodes d'essai — Amendement 2,2020-12-10,1,['75.080'],ISO/TC 28,9599,,[89055],"['en','fr']",2,

10099,IS,,ISO 4259:1979,Petroleum products — Determination and application of precision data in relation to methods of test,Produits pétroliers — Détermination et application des valeurs de fidélité relatives aux méthodes d'essai,1979-11-01,1,['75.080'],ISO/TC 28,9599,,[10100],"['en','fr']",27,

10100,IS,,ISO 4259:1992,Petroleum products — Determination and application of precision data in relation to methods of test,Produits pétroliers — Détermination et application des valeurs de fidélité relatives aux méthodes d'essai,1992-12-17,2,['75.080'],ISO/TC 28,9599,[10099],"[38211,30057]","['en','fr']",42,"<p>Covers the calculation of precision estimates and their use to specifications. In particular, it contains definitions of relevant statistical terms, the procedures to be adopted in the planning of an inter-laboratory test programme, the method of calculating the precision from the results of such a programme and the procedure to be followed in the interpretation of laboratory results

22130,IS,Cor,ISO 4259:1992/Cor 1:1993,Petroleum products — Determination and application of precision data in relation to methods of test — Technical Corrigendum 1,Produits pétroliers — Détermination et application des valeurs de fidélité relatives aux méthodes d'essai — Rectificatif technique 1,1993-03-25,2,['75.080'],ISO/TC 28,9599,,[38211],['en'],1,

65237,IS,,ISO 4259-2:2017,Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test,Produits pétroliers et connexes — Fidélité des méthodes de mesure et de leurs résultats — Partie 2: Application des valeurs de fidélité relatives aux méthodes d'essai,2017-11-01,1,['75.080'],ISO/TC 28,9599,[38211],[89058],"['en','fr']",25,"<p>ISO 4259-2:2017 specifies the methodology for the application of precision estimates of a test method derived from ISO 4259‑1. In particular, it defines the procedures for setting the property specification limits based upon test method precision where the proper

76399,IS,Amd,ISO 4259-2:2017/Amd 1:2019,Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test — Amendment 1,Produits pétroliers et connexes — Fidélité des méthodes de mesure et de leurs résultats — Partie 2: Application des valeurs de fidélité relatives aux méthodes d'essai — Amendement 1,2019-09-02,1,['75.080'],ISO/TC 28,9599,,[89058],"['en','fr']",5,

38211,IS,,ISO 4259:2006,Petroleum products — Determination and application of precision data in relation to methods of test,Produits pétroliers — Détermination et application des valeurs de fidélité relatives aux méthodes d'essai,2006-07-28,3,['75.080'],ISO/TC 28,9599,"[10100,22130]","[65237,65236]","['en','fr','ru']",62,"<p>ISO 4259:2006 covers the calculation of precision estimates and their application to specifications. In particular, it contains definitions of relevant statistical terms, the procedures to<b> </b>be adopted in the planning of an inter-laboratory test programme to determine the precision of a test method, the method of calculating the precision from the results of such a

10102,IS,,ISO 4261:1993,Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications,Produits pétroliers — Combustibles (classe F) — Spécifications des combustibles pour turbines à gaz en service dans l'industrie et la marine,1993-10-28,1,['75.160.20'],ISO/TC 28/SC 4,9599,,[57305],"['en','fr']",13,<p>Sets out the properties of fuels at the time and place of transfer of custody to the user. Does not cover requirements for gas turbine fuels for aviation use. Further information and recommendations for the quality of the fuel entering the turbine combustion chambers (trace metal limits) are provided in annex B. The terminology used and the te

10103,IS,,ISO 4262:1978,Petroleum products — Determination of carbon residue — Ramsbottom method,Produits pétroliers — Détermination du carbone résiduel — Méthode 'Ramsbottom',1978-02-01,1,['75.080'],ISO/TC 28,9599,,[20777],"['en','fr']",9,

10104,IS,,ISO 4263:1986,Petroleum products — Inhibited mineral oils — Determination of oxidation characteristics,Produits pétroliers — Huiles minérales inhibées — Détermination des caractéristiques d'oxydation,1986-10-30,1,['75.100'],ISO/TC 28,9599,,"[34279,35309]","['en','fr']",15,"<p>Specifies a method for evaluating oxidation stability of inhibited steam-turbine oils in the presence of oxygen, water, and metallic copper and iron at an elevated temperature. The method is also used for testing other oils such as hydraulic oils and circulating oils having a relative density less than that of water and containing rust and oxidation inhibitors. This method is used for specification purposes an

36954,IS,,ISO 4263-3:2006,Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids,Pétrole et produits connexes — Détermination du comportement au vieillissement des fluides et huiles inhibés — Essai TOST — Partie 3: Méthode anhydre pour les fluides hydrauliques synthétiques,2006-01-27,1,['75.120'],ISO/TC 28,9599,,[55896],"['en','fr','ru']",21,"<p>ISO 4263-3:2006 specifies a method for the determination of the ageing behaviour of synthetic hydraulic fluids of categories HFDR, HFDU, HEES and HEPG as defined e.g. in ISO 12922 and ISO 15380. The ageing is accelerated by the presen

55896,IS,,ISO 4263-3:2010,Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids,Pétrole et produits connexes — Détermination du comportement au vieillissement des fluides et huiles inhibés au moyen de l'essai TOST — Partie 3: Méthode anhydre pour les fluides hydrauliques synthétiques,2010-10-11,2,['75.120'],ISO/TC 28,9599,[36954],[60447],"['en','fr']",21,"<p>ISO 4263-3:2010 specifies a method for the determination of the ageing behaviour of synthetic hydraulic fluids of categories HFDR, HFDU, HEES and HEPG as defined e.g. in ISO 12922 and ISO 15380. The ageing is acc

10105,IS,,ISO 4264:1995,Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation,Produits pétroliers — Calcul de l'indice de cétane des distillats moyens par équation à quatre variables,1995-09-21,1,['75.160.20'],ISO/TC 28,9599,,[45627],"['en','fr']",6,<p>Describes a procedure for the calculation of the cetane index of middle-destillates from petroleum by the four-variable equation. Is not applicable to fuels containing additives for raising the cetane number nor to pure hydrocarbons and distillate fuels derived from coal.</p>

45627,IS,,ISO 4264:2007,Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation,Produits pétroliers — Calcul de l'indice de cétane des distillats moyens par équation à quatre variables,2007-08-06,2,['75.160.20'],ISO/TC 28,9599,[10105],[72764],"['en','fr']",7,"<p>ISO 4264:2007 describes a procedure for the calculation of the cetane index of middle-distillate fuels from petroleum-derived sources. The calculated value is termed the 'cetane index by four-variable equation'. Throughout the remaining text of ISO 4264:2007, the term 'cetane index' implies cetane index by four-variable equation.</p><p>ISO 4264:2007 is not applicable to fuels containi

57695,IS,Amd,ISO 4264:2007/Amd 1:2013,Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation — Amendment 1,Produits pétroliers — Calcul de l'indice de cétane des distillats moyens par équation à quatre variables — Amendement 1,2013-04-17,2,['75.160.20'],ISO/TC 28,9599,,[72764],"['en','fr']",1,

27584,IS,,ISO 4266-1:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks,Pétrole et produits pétroliers liquides — Mesurage du niveau et de la température dans les réservoirs de stockage par méthodes automatiques — Partie 1: Mesurage du niveau dans les réservoirs à pression atmosphérique,2002-11-11,1,['75.180.30'],ISO/TC 28/SC 2,9599,[10107],[85470],"['en','fr']",18,"<p>ISO 4266-1 gives guidance on the accuracy, installation, commissioning, calibration and verification of automatic level gauges (ALGs), of both intrusive and non-intrusive types, for measuring the level of

10107,IS,,ISO 4266:1994,Petroleum and liquid petroleum products — Measurement of temperature and level in storage tanks — Automatic methods,Pétrole et produits pétroliers liquides — Mesurages directs de la température et du niveau dans les réservoirs de stockage — Méthodes automatiques,1994-12-15,1,['75.180.30'],ISO/TC 28/SC 2,9599,,"[27586,27587,27584,27588,27589,27585]","['en','fr']",21,"<p>Gives guidance on the selection, specification, installation, operation and maintenance of mechanical and servo-operated automatic tank gauging systems measuring level and temperature in petroleum storage tanks which are at or near atmospheric temperature and pressure, or used under pressure, or for the

27585,IS,,ISO 4266-2:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels,Pétrole et produits pétroliers liquides — Mesurage du niveau et de la température dans les réservoirs de stockage par des méthodes automatiques — Partie 2: Mesurage du niveau dans les citernes de navire,2002-11-11,1,['75.180.30'],ISO/TC 28/SC 2,9599,[10107],[85471],"['en','fr']",11,"<p>ISO 4266-2 gives guidance on the accuracy, installation, calibration and verification of automatic level gauges (ALGs), both intrusive and non-intrusive, for measuring the level of petroleum and liquid petroleum products

27586,IS,,ISO 4266-3:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 3: Measurement of level in pressurized storage tanks (non-refrigerated),Pétrole et produits pétroliers liquides — Mesurage du niveau et de la température dans les réservoirs de stockage par méthodes automatiques — Partie 3: Mesurage du niveau dans les réservoirs de stockage sous pression (non réfrigérés),2002-11-11,1,['75.180.30'],ISO/TC 28/SC 2,9599,[10107],[85472],"['en','fr']",15,"<p>ISO 4266-3 gives guidance on the accuracy, installation, commissioning, calibration and verification of automatic level gauges (ALGs) both intrusive and non-int

27587,IS,,ISO 4266-4:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks,Pétrole et produits pétroliers liquides — Mesurage du niveau et de la température dans les réservoirs de stockage par méthodes automatiques — Partie 4: Mesurage de la température dans les réservoirs à pression atmosphérique,2002-11-12,1,['75.180.30'],ISO/TC 28/SC 2,9599,[10107],[85473],"['en','fr']",14,"<p>ISO 4266-4 gives guidance on the selection, accuracy, installation, commissioning, calibration and verification of automatic tank thermometers (ATTs) in fiscal/custody transfer applications i

27588,IS,,ISO 4266-5:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 5: Measurement of temperature in marine vessels,Pétrole et produits pétroliers liquides — Mesurage du niveau et de la température dans les réservoirs de stockage par méthodes automatiques — Partie 5: Mesurage de la température dans les citernes de navire,2002-11-12,1,['75.180.30'],ISO/TC 28/SC 2,9599,[10107],[85474],"['en','fr']",12,"<p>ISO 4266-5 gives guidance on the selection, accuracy, installation, commissioning, calibration and verification of automatic tank thermometers (ATTs) in fiscal/custody transfer applications in which the ATT is u

27589,IS,,ISO 4266-6:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated),Pétrole et produits pétroliers liquides — Mesurage du niveau et de la température dans les réservoirs de stockage par méthodes automatiques — Partie 6: Mesurage de la température dans les réservoirs de stockage sous pression (non réfrigérés),2002-11-12,1,['75.180.30'],ISO/TC 28/SC 2,9599,[10107],[85475],"['en','fr']",11,"<p>ISO 4266-6 gives guidance on the selection, accuracy, installation, commissioning, calibration and verification of automatic tank thermometers (AT

10122,IS,,ISO 4282:1977,Acid-grade fluorspar — Determination of loss in mass at 105 degrees C,Spaths fluor pour la fabrication de l'acide fluorhydrique — Détermination de la perte de masse à 105 degrés C,1977-02-01,1,['73.080'],ISO/TC 175,9599,,[10123],['en'],2,

10124,IS,,ISO 4283:1978,Acid-grade fluorspar — Determination of carbonate content — Titrimetric method,Spaths fluor pour la fabrication de l'acide fluorhydrique — Dosage des carbonates — Méthode titrimétrique,1978-09-01,1,['73.080'],ISO/TC 175,9599,,"[10125,10126]","['en','fr']",4,

10125,IS,,ISO 4283:1990,All grades of fluorspar — Determination of carbonate content — Titrimetric method,Tous les spaths fluor — Dosage des carbonates — Méthode titrimétrique,1990-06-07,2,['73.080'],ISO/TC 175,9599,[10124],[10126],"['en','fr']",5,

10127,IS,,ISO 4284:1978,Acid-grade fluorspar — Determination of sulphide content — Iodometric method,Spaths fluor pour la fabrication de l'acide fluorhydrique — Dosage des sulfures — Méthode iodométrique,1978-07-01,1,['73.080'],ISO/TC 175,9599,,"[10128,10129]","['en','fr']",4,

10128,IS,,ISO 4284:1988,Acid-grade and ceramic-grade fluorspar — Determination of sulfide content — Iodometric method,Spaths fluor pour la fabrication de l'acide fluorhydrique et spaths fluor utilisables dans l'industrie céramique — Dosage des sulfures — Méthode iodométrique,1988-11-24,2,['73.080'],ISO/TC 175,9599,[10127],[10129],"['en','fr']",4,

10131,IS,,ISO 4287-1:1984,Surface roughness — Terminology — Part 1: Surface and its parameters,Rugosité de surface — Terminologie — Partie 1: Surface et ses paramètres,1984-12-01,1,"['17.040.20','01.040.17']",ISO/TC 213,9599,,[10132],"['en','fr','ru']",25,

10132,IS,,ISO 4287:1997,"Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters","Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Termes, définitions et paramètres d'état de surface",1997-04-03,1,"['17.040.20','01.040.17']",ISO/TC 213,9599,[10131],"[67654,39929,72226]","['en','fr']",25,

44475,IS,Amd,ISO 4287:1997/Amd 1:2009,"Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Amendment 1: Peak count number","Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Termes, définitions et paramètres d'état de surface — Amendement 1: Nombre de pics",2009-06-09,1,"['17.040.20','01.040.17']",ISO/TC 213,9599,,"[67654,72226]","['en','fr']",1,

29874,IS,Cor,ISO 4287:1997/Cor 1:1998,"Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Technical Corrigendum 1","Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Termes, définitions et paramètres d'état de surface — Rectificatif technique 1",1998-05-28,1,"['17.040.20','01.040.17']",ISO/TC 213,9599,,"[67654,39929,72226]","['en','fr']",2,