Withdrawn and superseded ISO standards — page 112 of 246

9602,IS,,ISO 3951:1989,Sampling procedures and charts for inspection by variables for percent nonconforming,Règles et tables d'échantillonnage pour les contrôles par mesures des pourcentages de non conformes,1989-09-14,2,['03.120.30'],ISO/TC 69/SC 5,9599,[9601],"[39293,1465,34640]","['en','fr']",107,<p>Is complementary to ISO 2859. Object of the methods laid down is to ensure that lots of an acceptable quality have a high probability of acceptance and that the probability of rejection of inferior lots is as high as possible. To be used under the following conditions: inspection procedure to be applied to a continuous series of lots of discrete products supplied by one producer using one prod

39293,IS,,ISO 3951-2:2006,Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics,"Règles d'échantillonnage pour les contrôles par mesures — Partie 2: Spécification générale pour les plans d'échantillonnage simples, indexés d'après la limite d'acceptation de qualité (LAQ), pour les contrôles lot par lot des caractéristiques de qualité indépendantes",2006-03-31,1,['03.120.30'],ISO/TC 69/SC 5,9599,[9602],[57491],['en'],81,"<p>ISO 3951-2:2006 specifies an acceptance sampling system of single sampling plans for inspection by variables, index

50847,IS,Amd,ISO 3951-2:2006/Amd 1:2009,Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics — Amendment 1,"Règles d'échantillonnage pour les contrôles par mesures — Partie 2: Spécification générale pour les plans d'échantillonnage simples, indexés d'après la limite d'acceptation de qualité (LAQ), pour les contrôles lot par lot des caractéristiques de qualité indépendantes — Amendement 1",2009-08-21,1,['03.120.30'],ISO/TC 69/SC 5,9599,,[57491],['en'],1,

9607,IS,,ISO 3953:1977,Metallic powders — Determination of tap density,Poudres métalliques — Détermination de la masse volumique après tassement,1977-01-01,1,['77.160'],ISO/TC 119,9599,,"[20104,9608]","['en','fr']",3,

9608,IS,,ISO 3953:1985,Metallic powders — Determination of tap density,Poudres métalliques — Détermination de la masse volumique après tassement,1985-11-07,2,['77.160'],ISO/TC 119/SC 2,9599,[9607],[20104],"['en','fr']",3,

20104,IS,,ISO 3953:1993,Metallic powders — Determination of tap density,Poudres métalliques — Détermination de la masse volumique après tassement,1993-10-07,3,['77.160'],ISO/TC 119/SC 2,9599,"[9607,9608]",[56508],"['en','fr']",3,"<p>The principle of the method specified is tapping a specified amount of powder in a container by means of a tapping apparatus until no further decrease in the volume of the powder takes place. The mass of the powder divided by its volume after the test gives its tap density. By agreement, the tapping may be carried out by hand.</p>"

56508,IS,,ISO 3953:2011,Metallic powders — Determination of tap density,Poudres métalliques — Détermination de la masse volumique après tassement,2011-02-03,4,['77.160'],ISO/TC 119/SC 2,9599,[20104],[88570],"['en','fr','ru']",4,"<p>ISO 3953:2011 specifies a method for the determination of tap density, i.e. the density of a powder that has been tapped into a container under specified conditions.</p>"

9609,IS,,ISO 3954:1977,Powders for powder metallurgical purposes — Sampling,Poudres pour emploi en métallurgie des poudres — Échantillonnage,1977-02-01,1,['77.160'],ISO/TC 119/SC 2,9599,,"[43430,31604]","['en','fr']",5,"<p>Specifies procedures for the sampling of powders for powder metallurgical purposes. It also covers the splitting of the sample into the quantity required for testing. Defines lot, increment, gross sample, composite sample, test sample, test portion and test piece.</p>"

9612,IS,,ISO 3958:1977,Road vehicles — Passenger cars — Driver hand control reach,Véhicules routiers — Voitures particulières — Portée des mains du conducteur,1977-04-01,1,['43.040.30'],ISO/TC 22,9599,,[9613],"['en','fr']",15,

4395,IS,,ISO 396-3:1980,Products in fibre reinforced cement — Part 3: Cellulose-asbestos-cement flat sheets,Produits en ciment renforcé par des fibres — Partie 3: Plaques planes en amiante-ciment- cellulose,1980-08-01,1,['91.100.40'],ISO/TC 77,9599,,[4396],"['en','fr']",8,"<p>Specifies the characteristics, testing, marking and acceptance test of cellulose asbestos-cement flat sheets, which are classified in three categories according to the value of the minimum bending strength.Asbestos-cement flat sheet are dealt with in ISO 296-1 and silica asbestos-cement flat sheets in ISO 396-2.</p>"

9616,IS,,ISO 3960:1977,Animal and vegetable oils and fats — Determination of peroxide value,Corps gras d'origines animale et végétale — Détermination de l'indice de peroxyde,1977-06-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[27305],"['en','fr']",3,

27305,IS,,ISO 3960:1998,Animal and vegetable fats and oils — Determination of peroxide value,Corps gras d'origines animale et végétale — Détermination de l'indice de peroxyde,1998-08-13,2,['67.200.10'],ISO/TC 34/SC 11,9599,[9616],[33635],"['en','fr']",7,

33635,IS,,ISO 3960:2001,Animal and vegetable fats and oils — Determination of peroxide value,Corps gras d'origines animale et végétale — Détermination de l'indice de peroxyde,2001-12-13,3,['67.200.10'],ISO/TC 34/SC 11,9599,[27305],[39158],"['en','fr']",7,

36958,IS,Cor,ISO 3960:2001/Cor 1:2002,Animal and vegetable fats and oils — Determination of peroxide value — Technical Corrigendum 1,Corps gras d'origines animale et végétale — Détermination de l'indice de peroxyde — Rectificatif technique 1,2002-05-30,3,['67.200.10'],ISO/TC 34/SC 11,9599,,[39158],['en'],1,

39158,IS,,ISO 3960:2007,Animal and vegetable fats and oils — Determination of peroxide value — Iodometric (visual) endpoint determination,Corps gras d'origines animale et végétale — Détermination de l'indice de peroxyde — Détermination avec point d'arrêt iodométrique,2007-07-09,4,['67.200.10'],ISO/TC 34/SC 11,9599,"[36958,33635]",[71268],"['en','fr','ru']",9,"<p>ISO 3960:2007 specifies a method for the iodometric determination of the peroxide value of animal and vegetable fats and oils with a visual endpoint detection. The peroxide value is a measure of the amount of oxygen chemically bound to an oil or fat as peroxides, particularly hydroperoxides.</p><p>The method is applicable to all anim

9618,IS,,ISO 3961:1979,Animal and vegetable oils and fats — Determination of iodine value,Corps gras d'origines animale et végétale — Détermination de l'indice d'iode,1979-12-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,,"[9620,9619]","['en','fr']",3,

9619,IS,,ISO 3961:1989,Animal and vegetable fats and oils — Determination of iodine value,Corps gras d'origines animale et végétale — Détermination de l'indice d'iode,1989-08-24,2,['67.200.10'],ISO/TC 34/SC 11,9599,[9618],[9620],['en'],2,

9620,IS,,ISO 3961:1996,Animal and vegetable fats and oils — Determination of iodine value,Corps gras d'origines animale et végétale — Détermination de l'indice d'iode,1996-06-06,3,['67.200.10'],ISO/TC 34/SC 11,9599,"[9618,9619]",[46136],"['en','fr']",6,<p>Specifies a method for the determination of the iodine value of animal and vegetable fats and oils. Replaces the second edition.</p>

46136,IS,,ISO 3961:2009,Animal and vegetable fats and oils — Determination of iodine value,Corps gras d'origines animale et végétale — Détermination de l'indice d'iode,2009-03-19,4,['67.200.10'],ISO/TC 34/SC 11,9599,[9620],[61278],"['en','fr']",8,"<p>ISO 3961:2009 specifies a reference method for the determination of the iodine value (IV) of animal and vegetable fats and oils, hereinafter referred to as fats.</p><p>Annex A describes a method for the calculation of the IV from fatty acid compositional data. This method is not applicable to fish oils.</p>"

61278,IS,,ISO 3961:2013,Animal and vegetable fats and oils — Determination of iodine value,Corps gras d'origines animale et végétale — Détermination de l'indice d'iode,2013-07-04,5,['67.200.10'],ISO/TC 34/SC 11,9599,[46136],[71868],"['en','fr','ru']",10,"<p>ISO 3961:2013 specifies a reference method for the determination of the iodine value (commonly known in the industry as IV) of animal and vegetable fats and oils, hereinafter referred to as fats.</p><p>An annex describes a method for the calculation of the IV from fatty acid compositional data. This method is not applicable to fish oils. Furthermore cold-pressed, crude and unrefined vegetable oils as well as (partially) hydrogenated oils

71868,IS,,ISO 3961:2018,Animal and vegetable fats and oils — Determination of iodine value,Corps gras d'origines animale et végétale — Détermination de l'indice d'iode,2018-07-24,6,['67.200.10'],ISO/TC 34/SC 11,9599,[61278],[89081],"['en','fr']",12,"<p>This document specifies a reference method for the determination of the iodine value (commonly known in the industry as IV) of animal and vegetable fats and oils, hereinafter referred to as fats.</p><p>Annex B describes a method for the calculation of the IV from fatty acid compositional data. This method is not applicable to fish oils. Furthermore, cold-pressed, crude and unrefined vegetable oils as well as (partially) hydrogenated oils can g

9623,IS,,ISO 3964:1982,Dental handpieces — Coupling dimensions,Pièces à main dentaires — Dimensions d'accouplement,1982-12-01,2,['11.060.20'],ISO/TC 106/SC 4,9599,,[63930],"['en','fr']",2,<p>Specifies the nominal dimensions and tolerances of the swivel-type coupling used between the dental handpieces and their driving mechanisms. It is not applicable to the older 'slip-joint' coupling and restricted to mechanically coupled handpieces of the slow or medium speed types.</p>

63930,IS,,ISO 3964:2016,Dentistry — Coupling dimensions for handpiece connectors,Médecine bucco-dentaire — Dimensions d'accouplement pour pièces à main dentaires,2016-10-31,3,['11.060.20'],ISO/TC 106/SC 4,9599,[9623],[82736],"['en','fr']",11,"<p>ISO 3964:2016 specifies the coupling between handpieces and motors connected to dental units.</p><p>ISO 3964:2016 specifies the nominal dimensions, tolerances and the extraction force of coupling systems for use between handpiece and motor which supply the handpiece with water, air and light and rotation energy.</p>"

73624,IS,Amd,ISO 3964:2016/Amd 1:2018,Dentistry — Coupling dimensions for handpiece connectors — Amendment 1,Médecine bucco-dentaire — Dimensions d'accouplement pour pièces à main dentaires — Amendement 1,2018-07-10,3,['11.060.20'],ISO/TC 106/SC 4,9599,,"[82736,82737]","['en','fr']",5,

9625,IS,,ISO 3965:1977,Agricultural wheeled tractors — Determination of maximum travel speed,Tracteurs agricoles à roues — Détermination de la vitesse maximale d'avancement,1977-03-01,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[9626],['en'],1,

9627,IS,,ISO 3966:1977,Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes,Mesure du débit des fluides dans les conduites fermées — Méthode d'exploration du champ des vitesses au moyen de tubes de Pitot doubles,1977-06-01,1,['17.120.10'],ISO/TC 30/SC 5,9599,,[50626],"['en','fr']",39,"<p>Specifies a method for the determination in a closed conduit of the volume rate of flow of a regular flow. Deals in particular with the technology and maintenance of Pitot static tubes, with the calculation of local velocities from measured differential pressures and with the computation of the flow rate by velocity integration.</p>"

50626,IS,,ISO 3966:2008,Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes,Mesurage du débit des fluides dans les conduites fermées — Méthode d'exploration du champ des vitesses au moyen de tubes de Pitot doubles,2008-07-10,2,['17.120.10'],ISO/TC 30/SC 5,9599,[9627],[75508],"['en','fr']",54,"<p>ISO 3966:2008 specifies a method for the determination in a closed conduit of the volume rate of flow of a regular flow: a) of a fluid of substantially constant density or corresponding to a Mach number not exceeding 0,25; b) with substantially uniform stagnation temperature across the measuring cross-section; c) running full in the conduit; d) under steady fl

75508,IS,,ISO 3966:2020,Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes,Mesurage du débit des fluides dans les conduites fermées — Méthode d'exploration du champ des vitesses au moyen de tubes de Pitot doubles,2020-07-20,3,['17.120.10'],ISO/TC 30/SC 5,9599,[50626],[86000],"['en','fr']",55,"<p>This document specifies a method for the determination in a closed conduit of the volume rate of flow of a regular flow</p><p>a) of a fluid of substantially constant density or corresponding to a Mach number not exceeding 0,25,</p><p>b) with substantially uniform stagnation temperature across the measuring cross-section,</p><p>c) running full in the con

9629,IS,,ISO 3968:1981,Hydraulic fluid power — Filters — Evaluation of pressure drop versus flow characteristics,Transmissions hydrauliques — Filtres — Évaluation de la perte de charge en fonction du débit,1981-12-01,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[28057],"['en','fr']",7,"<p>Specifies the method of measuring the pressure drop across a fluid filter under various conditions of flow. Two standards of measurement are specified: class A - for accurate evaluation for referee purposes - requiring laboratory conditions; class B - for evaluation for general purposes - requiring test facilities less stringent that laboratory conditions. Figure 1 shows an example for a suitable test circuit, and

28057,IS,,ISO 3968:2001,Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow characteristics,Transmissions hydrauliques — Filtres — Évaluation de la perte de charge en fonction du débit,2001-12-20,2,['23.100.60'],ISO/TC 131/SC 6,9599,[9629],[64104],"['en','fr']",11,

37254,IS,Cor,ISO 3968:2001/Cor 1:2002,Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow characteristics — Technical Corrigendum 1,Transmissions hydrauliques — Filtres — Évaluation de la perte de charge en fonction du débit — Rectificatif technique 1,2002-09-19,2,['23.100.60'],ISO/TC 131/SC 6,9599,,[64104],"['en','fr']",1,

9635,IS,,ISO 3972:1979,Sensory analysis — Determination of sensitivity of taste,Analyse sensorielle — Détermination de l'acuité gustative,1979-12-01,1,['67.240'],ISO/TC 34/SC 12,9599,,[9636],['en'],5,

9636,IS,,ISO 3972:1991,Sensory analysis — Methodology — Method of investigating sensitivity of taste,Analyse sensorielle — Méthodologie — Méthode d'éveil à la sensibilité gustative,1991-09-26,2,['67.240'],ISO/TC 34/SC 12,9599,[9635],[50110],"['en','fr']",7,<p>Describes a set of objective tests for familiarizing assessors with sensory analysis. This second edition cancels and replaces the first edition (1979). Annexes A and B are for information only.</p>

9637,IS,,ISO 3973:1977,Definitions of living animals for slaughter — Bovines,Définitions des animaux vivants d'abattoir — Bovins,1977-02-01,1,['65.020.30'],ISO/TC 34/SC 6,9599,,[23751],"['en','fr']",5,

9640,IS,,ISO 3976:1977,Anhydrous milk fat — Determination of peroxide value (Reference method),Matière grasse de lait déshydratée — Détermination de l'indice de peroxyde (Méthode de référence),1977-11-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,"[29746,38685]","['en','fr']",3,"<p>Describes a method, the principle of which consists in dissolving a test portion in a mixture of chloroform and methanol and adding iron(II) chloride and ammonium thiocyanate. After a fixed reaction time a photometric determination of the red iron (III) complex is made.</p>"

9641,IS,,ISO 3977:1978,Gas turbines — Procurement,Turbines à gaz — Spécifications pour l'acquisition,1978-07-01,1,['27.040'],ISO/TC 192,9599,,[9642],"['en','fr']",33,

9642,IS,,ISO 3977:1991,Gas turbines — Procurement,Turbines à gaz — Spécifications pour l'acquisition,1991-11-21,2,['27.040'],ISO/TC 192,9599,[9641],"[23816,24755]","['en','fr']",37,

22420,IS,Amd,ISO 3977:1991/Amd 1:1995,Gas turbines — Procurement — Amendment 1,Turbines à gaz — Spécifications pour l'acquisition — Amendement 1,1995-10-26,2,['27.040'],ISO/TC 192,9599,,"[23816,24755]","['en','fr']",25,

24755,IS,,ISO 3977-2:1997,Gas turbines — Procurement — Part 2: Standard reference conditions and ratings,Turbines à gaz — Spécifications pour l'acquisition — Partie 2: Conditions normales de référence et caractéristiques,1997-06-19,1,['27.040'],ISO/TC 192,9599,"[9642,22420]",[80055],"['en','fr']",3,

25134,IS,,ISO 3977-3:2002,Gas turbines — Procurement — Part 3: Design requirements,Turbines à gaz — Spécifications pour l'acquisition — Partie 3: Exigences de conception,2002-07-25,1,['27.040'],ISO/TC 192,9599,,[40394],"['en','fr']",64,"<p>This part of ISO 3977 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement.</p><p>It is not intended to deal with local or national legislative requirements with which the installation may be required to conform.

25143,IS,,ISO 3977-9:1999,"Gas turbines — Procurement — Part 9: Reliability, availability, maintainability and safety","Turbines à gaz — Spécifications pour l'acquisition — Partie 9: Fiabilité, disponibilité, maintenance et sécurité",1999-12-09,1,['27.040'],ISO/TC 192,9599,,[82198],"['en','fr']",25,

9650,IS,,ISO 3984:1982,Road vehicles — Passenger cars — Moving barrier rear collision test method,Véhicules routiers — Voitures particulières — Essai de collision arrière sur barrière mobile,1982-02-01,2,['43.100'],ISO/TC 22,9599,,[34005],"['en','fr']",4,"<p>Specifies a test method for passenger cars, which permits the direct comparison of results obtained in different test laboratories. Two figures illustrate shapes and reference quantities of concern. This second edition cancels and replaces the first edition (1977).</p>"

9652,IS,,ISO 3987:1980,Petroleum products — Lubricating oils and additives — Determination of sulphated ash,Produits pétroliers — Huiles lubrifiantes et additifs — Détermination des cendres sulfatées,1980-03-01,1,['75.100'],ISO/TC 28,9599,,[22415],"['en','fr']",3,

22415,IS,,ISO 3987:1994,Petroleum products — Lubricating oils and additives — Determination of sulfated ash,Produits pétroliers — Huiles lubrifiantes et additifs — Détermination des cendres sulfatées,1994-12-15,2,['75.100'],ISO/TC 28,9599,[9652],[44979],"['en','fr']",4,"<p>Cancels and replaces the first edition (1980). Describes a procedure for the determination of the mass percentage of sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compounding. These additives usually contain one or more of the following metals: barium, calcium, magnesium, zinc, potassium, sodium and tin. Not intended for the analysis of used engine oils containing lea

44979,IS,,ISO 3987:2010,Petroleum products — Determination of sulfated ash in lubricating oils and additives,Produits pétroliers — Détermination des cendres sulfatées dans les huiles lubrifiantes et additifs,2010-10-29,3,['75.100'],ISO/TC 28,9599,[22415],[86893],"['en','fr','ru']",7,"<p>ISO 3987:2010 describes a procedure for the determination of the mass percentage of sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compounding. These additives usually contain one or more of the following metals: barium, calcium, magnesium, zinc, potassium, sodium and tin. The elements sulfur, phosphorus and chlorine can also be present in combined form.

57930,IS,Cor,ISO 3987:2010/Cor 1:2011,Petroleum products — Determination of sulfated ash in lubricating oils and additives — Technical Corrigendum 1,Produits pétroliers — Détermination des cendres sulfatées dans les huiles lubrifiantes et additifs — Rectificatif technique 1,2011-01-21,3,['75.100'],ISO/TC 28,9599,,[86893],"['en','ru']",1,

9658,IS,,ISO 3994:1977,Plastics products — Hose of polymer reinforced thermoplastics for suction and discharge,Produits en plastiques — Tuyaux thermoplastiques à renforcement polymérique pour aspiration et refoulement,1977-07-01,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[25870],"['en','fr']",6,

25870,IS,,ISO 3994:1998,Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification,Tuyaux en plastiques — Tuyaux thermoplastiques à renforcement thermoplastique en spirale pour aspiration et refoulement de matières aqueuses — Spécifications,1998-04-02,2,['23.040.70'],ISO/TC 45/SC 1,9599,[9658],[41422],"['en','fr']",12,

41422,IS,,ISO 3994:2007,Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification,Tuyaux en plastiques — Tuyaux thermoplastiques à renforcement thermoplastique en spirale pour aspiration et refoulement de matières aqueuses — Spécifications,2007-08-06,3,['23.040.70'],ISO/TC 45/SC 1,9599,[25870],[59513],"['en','fr']",14,"<p>ISO 3994:2007 specifies the requirements for three types of helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of water, weak aqueous chemical solutions and abrasive solids and slurries, for use in the ambient temperature range from -10 °C to +55 °C.</p><p>The three type

59513,IS,,ISO 3994:2014,Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification,Tuyaux en plastiques — Tuyaux thermoplastiques à renforcement thermoplastique en spirale pour aspiration et refoulement de matières aqueuses — Spécifications,2014-08-11,4,['23.040.70'],ISO/TC 45/SC 1,9599,[41422],[91128],"['en','fr']",15,"<p>ISO 3994:2014 specifies the requirements for three types of helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of water, weak aqueous chemical solutions and abrasive solids and slurries, for use in the ambient temperature range from −10 °C to 55 °C.</p><p>The three types

9659,IS,,ISO 3995:1977,Metallic powders — Determination of green strength by transverse rupture of rectangular compacts,Poudres métalliques — Détermination de la résistance de comprimés rectangulaires à cru,1977-03-01,1,"['77.160','77.040.10']",ISO/TC 119,9599,,[9660],"['en','fr']",5,

9660,IS,,ISO 3995:1985,Metallic powders — Determination of green strength by transverse rupture of rectangular compacts,Poudres métalliques — Détermination de la résistance de comprimés rectangulaires à cru,1985-07-04,2,"['77.160','77.040.10']",ISO/TC 119/SC 2,9599,[9659],"[84335,34925]","['en','fr']",5,<p>This second edition cancels and replaces the first edition (i. e. ISO 3995:1977). The method subjects a compact pressed form metallic powder to a uniformly increasing transverse force under controlled conditions until fracture occurs. the green strength is determined on compacts either having a particular density or after compaction at a specific compacting pressure.</p>

9661,IS,,ISO 3996:1978,Road vehicles — Brake hose assemblies for hydraulic braking systems used with a non-petroleum base hydraulic fluid,Véhicules routiers — Flexible pour systèmes de freinage hydraulique utilisant un liquide de frein à base non pétrolière,1978-09-01,1,"['83.140.40','43.040.40']",ISO/TC 22,9599,,"[9663,9662]","['en','fr']",9,

9662,IS,,ISO 3996:1986,Road vehicles — Brake hose assemblies for hydraulic braking systems used with a non-petroleum-base hydraulic fluid,Véhicules routiers — Flexibles pour systèmes de freinage hydraulique utillisant un liquide de frein à base non pétrolière,1986-12-04,2,"['83.140','43.040.40']",ISO/TC 22,9599,[9661],[9663],"['en','fr']",11,

32922,IS,,ISO 3999-1:2000,"Radiation protection — Apparatus for industrial gamma radiography — Part 1: Specifications for performance, design and tests","Radioprotection — Appareils pour radiographie gamma industrielle — Partie 1: Spécifications de performance, de conception et d'essais",2000-04-27,1,['19.100'],ISO/TC 85/SC 2,9599,[9666],[40447],"['en','fr']",31,

9666,IS,,ISO 3999:1977,Apparatus for gamma radiography — Specification,Appareils de radiographie gamma — Spécifications,1977-09-01,1,['19.100'],ISO/TC 85,9599,,"[30217,9667,32922,30216]","['en','fr']",10,"<p>Specifies the constructional requirements of portable, mobile and fixed apparatus for industrial radiography of category I (sealed source not removed for exposure) and II (sealed source projected out of the container by an operator at a distance). Operational usage of exposure containers is not covered. As the transport of apparatus is concerned, the requirements of the relevant transport regulations have also to be satisfied.</p>"

3567,IS,,ISO 4:1972,Documentation — International code for the abbreviation of titles of periodicals,Documentation — Code international pour l'abréviation des titres de périodiques,1972-03-01,1,['01.140.40'],ISO/TC 46,9599,,[3568],"['en','fr']",4,

3568,IS,,ISO 4:1984,Documentation — Rules for the abbreviation of title words and titles of publications,Documentation — Règles pour l'abréviation des mots dans les titres et des titres des publications,1984-12-01,2,['01.140.40'],ISO/TC 46/SC 9,9599,[3567],[3569],"['en','fr']",5,

9668,IS,,ISO 4000-1:1985,Passenger car tyres and rims — Part 1: Tyres (metric series),Pneumatiques et jantes pour voitures particulières — Partie 1: Pneumatiques (séries millimétriques),1985-05-30,3,['83.160.10'],ISO/TC 31/SC 3,9599,,"[9669,9670]","['en','fr']",,

9669,IS,,ISO 4000-1:1989,Passenger car tyres and rims — Part 1: Tyres (metric series),Pneumatiques et jantes pour voitures particulières — Partie 1: Pneumatiques (séries millimétriques),1989-08-24,4,['83.160.10'],ISO/TC 31/SC 3,9599,[9668],[9670],"['en','fr']",7,

9670,IS,,ISO 4000-1:1994,Passenger car tyres and rims — Part 1: Tyres (metric series),Pneumatiques et jantes pour voitures particulières — Partie 1: Pneumatiques (série millimétrique),1994-05-05,5,['83.160.10'],ISO/TC 31/SC 3,9599,"[9668,9669]",[24550],"['en','fr']",21,

24550,IS,,ISO 4000-1:1995,Passenger car tyres and rims — Part 1: Tyres (metric series),Pneumatiques et jantes pour voitures particulières — Partie 1: Pneumatiques (série millimétrique),1995-12-14,6,['83.160.10'],ISO/TC 31/SC 3,9599,[9670],[31096],"['en','fr']",23,"<p>Gives the designation, dimensions and load ratings of the metric series of tyres for passenger cars. Replaces the fifth edition, which has been technically revised.</p>"

31096,IS,,ISO 4000-1:2001,Passenger car tyres and rims — Part 1: Tyres (metric series),Pneumatiques et jantes pour voitures particulières — Partie 1: Pneumatiques (série millimétrique),2001-12-20,7,['83.160.10'],ISO/TC 31/SC 3,9599,[24550],[45053],"['en','fr']",34,

36887,IS,Amd,ISO 4000-1:2001/Amd 1:2004,Passenger car tyres and rims — Part 1: Tyres (metric series) — Amendment 1,Pneumatiques et jantes pour voitures particulières — Partie 1: Pneumatiques (série millimétrique) — Amendement 1,2004-05-17,7,['83.160.10'],ISO/TC 31/SC 3,9599,,[45053],"['en','fr']",6,

45053,IS,,ISO 4000-1:2007,Passenger car tyres and rims — Part 1: Tyres (metric series),Pneumatiques et jantes pour voitures particulières — Partie 1: Pneumatiques (série métrique),2007-06-07,8,['83.160.10'],ISO/TC 31/SC 3,9599,"[31096,43949,36887,35538]",[52160],"['en','fr']",37,"<p>ISO 4000-1:2007 specifies the designation, dimensions and load ratings of metric-series tyres primarily intended for passenger cars.</p>"

52160,IS,,ISO 4000-1:2010,Passenger car tyres and rims — Part 1: Tyres (metric series),Pneumatiques et jantes pour voitures particulières — Partie 1: Pneumatiques (série millimétrique),2010-03-24,9,['83.160.10'],ISO/TC 31/SC 3,9599,[45053],[56894],"['en','fr']",50,"<p>ISO 4000-1:2010 specifies the designation, dimensions and load ratings of metric-series tyres primarily intended for passenger cars.</p>"

56894,IS,,ISO 4000-1:2013,Passenger car tyres and rims — Part 1: Tyres (metric series),Pneumatiques et jantes pour voitures particulières — Partie 1: Pneumatiques (série millimétrique),2013-02-18,10,['83.160.10'],ISO/TC 31/SC 3,9599,[52160],[63769],"['en','fr','ru']",55,"<p>ISO 4000-1:2013 specifies the designation, dimensions and load ratings of metric-series tyres primarily intended for passenger cars.</p>"

63769,IS,,ISO 4000-1:2015,Passenger car tyres and rims — Part 1: Tyres (metric series),Pneus et jantes pour voitures particulières — Partie 1: Pneumatiques (série millimétrique),2015-09-21,11,['83.160.10'],ISO/TC 31/SC 3,9599,[56894],[78726],"['en','fr']",53,"<p>ISO 4000-1:2015 specifies the designation, dimensions, and load ratings of metric-series tyres primarily intended for passenger cars.</p>"

78726,IS,,ISO 4000-1:2021,Passenger car tyres and rims — Part 1: Tyres (metric series),Pneumatiques et jantes pour voitures particulières — Partie 1: Pneumatiques (série millimétrique),2021-08-13,12,['83.160.10'],ISO/TC 31/SC 3,9599,[63769],[84474],"['en','fr']",52,"<p>This document specifies the designation, dimensions, and load ratings of metric-series tyres primarily intended for passenger cars.</p>"

9672,IS,,ISO 4000-2:1987,Passenger car tyres and rims — Part 2: Rims,Pneumatiques et jantes pour voitures particulières — Partie 2: Jantes,1987-10-15,1,['43.040.50'],ISO/TC 31/SC 3,9599,,[9673],"['en','fr']",4,

9673,IS,,ISO 4000-2:1994,Passenger car tyres and rims — Part 2: Rims,Pneumatiques et jantes pour voitures particulières — Partie 2: Jantes,1994-12-15,2,['43.040.50'],ISO/TC 31/SC 3,9599,[9672],[30079],"['en','fr']",4,"<p>Cancels and replaces the first edition (1987). Specifies the designation, contour and dimensions of 5° tapered (drop-centre) rims primarily intended for passenger cars. The designation, dimensions and load ratings of tyres (metric series) are given in ISO 4000-1.</p>"

30079,IS,,ISO 4000-2:2001,Passenger car tyres and rims — Part 2: Rims,Pneumatiques et jantes pour voitures particulières — Partie 2: Jantes,2001-09-27,3,['43.040.50'],ISO/TC 31/SC 3,9599,[9673],[45065],"['en','fr']",5,

45065,IS,,ISO 4000-2:2007,Passenger car tyres and rims — Part 2: Rims,Pneumatiques et jantes pour voitures particulières — Partie 2: Jantes,2007-06-07,4,['43.040.50'],ISO/TC 31/SC 3,9599,"[43950,30079]",[61085],"['en','fr']",8,"<p>ISO 4000-2:2007 specifies the designation, contour and dimensions of 5° tapered (drop-centre) rims primarily intended for passenger cars.</p>"

61085,IS,,ISO 4000-2:2013,Passenger car tyres and rims — Part 2: Rims,Pneumatiques et jantes pour voitures particulières — Partie 2: Jantes,2013-12-06,5,['43.040.50'],ISO/TC 31/SC 3,9599,[45065],[78725],"['en','fr','ru']",7,"<p>ISO 4000-2:2013 specifies the designation, contour and dimensions of 5° tapered (drop-centre) rims primarily intended for passenger cars.</p>"

9680,IS,,ISO 4006:1977,Measurement of fluid flow in closed conduits — Vocabulary and symbols,Mesure de débit des fluides dans les conduites fermées — Vocabulaire et symboles,1977-09-01,1,"['17.120.10','01.040.17']",ISO/TC 30,9599,,[9681],"['en','fr']",23,

9682,IS,,ISO 4007:1977,Personal eye-protectors — Vocabulary,Protection individuelle de l'oeil — Vocabulaire,1977-10-01,1,"['13.340.20','01.040.13']",ISO/TC 94/SC 6,9599,,[51352],"['en','fr']",4,<p>Defines the principal terms used. These terms and their definitions conform to ISO 31/VI and CIE Publication 17. It states in the annex the spectral distribution of solar radiation energy (in the infra-red spectrum). This annex is not an integral part of the standard.</p>

51352,IS,,ISO 4007:2012,Personal protective equipment — Eye and face protection — Vocabulary,Équipement de protection individuelle — Protection du visage et des yeux — Vocabulaire,2012-05-09,2,"['13.340.20','01.040.13']",ISO/TC 94/SC 6,9599,[9682],[69599],"['de','en','fr']",110,<p>ISO 4007:2012 defines and explains the principal terms used in the field of personal eye and face protection.</p>

9683,IS,,ISO 4008:1977,Withdrawal of ISO 4008-1977,Annulation de l'ISO 4008-1977,1977-02-01,1,['43.060.40'],ISO/TC 22,9599,,[9684],['en'],2,

9687,IS,,ISO 4009:1977,Road vehicles — Towing vehicles — Mounting of electrical connections on rear cross members,Véhicules routiers — Véhicules tracteurs — Montage des dispositifs d'accouplements électriques sur la traverse arrière,1977-04-01,1,['43.040.10'],ISO/TC 22,9599,,[9688],"['en','fr']",2,

9688,IS,,ISO 4009:1989,Towing vehicles — Mounting of electrical connections on rear cross-members,Véhicules tracteurs — Montage des dispositifs d'accouplements électriques sur la traverse arrière,1989-12-14,2,['43.040.10'],ISO/TC 22,9599,[9687],[22087],"['en','fr']",2,

9689,IS,,ISO 4010:1977,"Road vehicles — Calibrating nozzle, delay pintle type",Véhicules routiers — Injecteur d'essai du type à téton et à étranglement,1977-02-01,1,['43.180'],ISO/TC 22,9599,,[25131],"['en','fr']",3,

9691,IS,,ISO 4012:1978,Concrete — Determination of compressive strength of test specimens,Béton — Détermination de la résistance à la compression des éprouvettes,1978-11-01,1,['91.100.30'],ISO/TC 71,9599,,"[29100,40764]","['en','fr']",4,"<p>Specifies a method for the determination of the compressive strength of test specimens of hardened concrete. Describes compression testing machine, test procedure, expression of results and details of the test report.</p>"

9692,IS,,ISO 4013:1978,Concrete — Determination of flexural strength of test specimens,Béton — Détermination de la résistance à la flexion des éprouvettes,1978-08-01,1,['91.100.30'],ISO/TC 71,9599,,"[29100,40764]","['en','fr']",4,"<p>Specifies a method for the determination of the flexural strength of test specimens of hardened concrete by means of a constant moment in the centre zone (two-point loading). The centre-point loading may also be used and is given in the annex. Covers test specimen, apparatus, procedure, expression of results and test report.</p>"

9693,IS,,ISO 4014:1979,Hexagon head bolts — Product grades A and B,Boulons à tête hexagonale — Classes de produit A et B,1979-07-01,1,['21.060.10'],ISO/TC 2,9599,,[9694],"['en','fr']",6,

9694,IS,,ISO 4014:1988,Hexagon head bolts — Product grades A and B,Vis à tête hexagonale partiellement filetées — Grades A et B,1988-06-23,2,['21.060.10'],ISO/TC 2,9599,[9693],[26376],"['en','fr']",8,

26376,IS,,ISO 4014:1999,Hexagon head bolts — Product grades A and B,Vis à tête hexagonale partiellement filetées — Grades A et B,1999-09-30,3,['21.060.10'],ISO/TC 2/SC 11,9599,[9694],[56447],"['en','fr']",12,

56447,IS,,ISO 4014:2011,Hexagon head bolts — Product grades A and B,Vis à tête hexagonale partiellement filetées — Grades A et B,2011-03-15,4,['21.060.10'],ISO/TC 2/SC 11,9599,[26376],[72579],"['en','fr']",14,"<p>ISO 4014:2011 specifies the characteristics of hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10<i>d</i><i> </i>or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10<i>d</i><i> </i>or 150 mm, whichever is the shorter.</p>"

9695,IS,,ISO 4015:1979,Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter),Vis à tête hexagonale partiellement filetées — Grade B — Tige réduite (diamètre de tige approximativement égal au diamètre sur flanc de filet),1979-07-01,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[72584],"['en','fr']",5,<p>Specifies the characteristics of products with metric dimensions and thread diameters from 3 mm up to and including 20 mm; includes specifications with reference to International Standards; gives an example for the designation.</p>

9696,IS,,ISO 4016:1979,Hexagon head bolts — Product grade C,Boulons à tête hexagonale — Classe de produit C,1979-06-01,1,['21.060.10'],ISO/TC 2,9599,,[9697],"['en','fr']",6,

9697,IS,,ISO 4016:1988,Hexagon head bolts — Product grade C,Vis à tête hexagonale partiellement filetées — Grade C,1988-05-05,2,['21.060.10'],ISO/TC 2,9599,[9696],[26377],"['en','fr']",8,

26377,IS,,ISO 4016:1999,Hexagon head bolts — Product grade C,Vis à tête hexagonale partiellement filetées — Grade C,1999-08-26,3,['21.060.10'],ISO/TC 2/SC 11,9599,[9697],[56448],"['en','fr']",9,

56448,IS,,ISO 4016:2011,Hexagon head bolts — Product grade C,Vis à tête hexagonale partiellement filetées — Grade C,2011-03-15,4,['21.060.10'],ISO/TC 2/SC 11,9599,[26377],[72580],"['en','fr']",9,"<p>ISO 4016:2011 specifies the characteristics of hexagon head bolts with threads from M5 up to and including M64, of product grade C.</p>"

9698,IS,,ISO 4017:1979,Hexagon head screws — Product grades A and B,Vis à tête hexagonale — Classes de produit A et B,1979-07-01,1,['21.060.10'],ISO/TC 2,9599,,[9699],"['en','fr']",6,

9699,IS,,ISO 4017:1988,Hexagon head screws — Product grades A and B,Vis à tête hexagonale entièrement filetées — Grades A et B,1988-05-26,2,['21.060.10'],ISO/TC 2,9599,[9698],[26378],"['en','fr']",8,

26378,IS,,ISO 4017:1999,Hexagon head screws — Product grades A and B,Vis à tête hexagonale entièrement filetées — Grades A et B,1999-08-26,3,['21.060.10'],ISO/TC 2/SC 11,9599,[9699],[56449],"['en','fr']",11,

56449,IS,,ISO 4017:2011,Hexagon head screws — Product grades A and B,Vis à tête hexagonale entièrement filetées — Grades A et B,2011-04-01,4,['21.060.10'],ISO/TC 2/SC 11,9599,[26378],[63206],"['en','fr']",10,"<p>ISO 4017:2011 specifies the characteristics of hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10<i>d</i> or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10<i>d</i> or 150 mm, whichever is the shorter.</p>"

63206,IS,,ISO 4017:2014,Fasteners — Hexagon head screws — Product grades A and B,Fixations — Vis à tête hexagonale entièrement filetées — Grades A et B,2014-07-01,5,['21.060.10'],ISO/TC 2/SC 11,9599,[56449],[72585],"['en','fr']",10,"<p>ISO 4017:2014 specifies the characteristics of hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10<i>d</i> or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10<i>d</i> or 150 mm, whichever is the shorter.</p>"

9700,IS,,ISO 4018:1979,Hexagon head screws — Product grade C,Vis à tête hexagonale — Classe de produit C,1979-06-01,1,['21.060.10'],ISO/TC 2,9599,,[9701],"['en','fr']",5,

9701,IS,,ISO 4018:1988,Hexagon head screws — Product grade C,Vis à tête hexagonale entièrement filetées — Grade C,1988-05-19,2,['21.060.10'],ISO/TC 2,9599,[9700],[26379],"['en','fr']",8,

26379,IS,,ISO 4018:1999,Hexagon head screws — Product grade C,Vis à tête hexagonale entièrement filetées — Grade C,1999-08-26,3,['21.060.10'],ISO/TC 2/SC 11,9599,[9701],[56450],"['en','fr']",9,