Withdrawn and superseded ISO standards — page 113 of 246

56450,IS,,ISO 4018:2011,Hexagon head screws — Product grade C,Vis à tête hexagonale entièrement filetées — Grade C,2011-04-01,4,['21.060.10'],ISO/TC 2/SC 11,9599,[26379],[72581],"['en','fr']",9,"<p>ISO 4018:2011 specifies the characteristics of hexagon head screws with threads from M5 up to and including M64, of product grade C.</p>"

9702,IS,,ISO 4019:1982,Cold-finished steel structural hollow sections — Dimensions and sectional properties,"Profils creux en acier, finis à froid — Dimensions et caractéristiques",1982-08-01,1,['77.140.75'],ISO/TC 5/SC 1,9599,,"[21391,32898]","['en','fr']",11,"<p>Specifies the parameters of the metric series as follow: circular hollow sections (table3); square hollow sections (table 4); rectangular hollow sections (table 5). For square and rectangular sections, the sectional properties are calculated using the corner radius as given in table 1. Table 2 includes tolerances.</p>"

32898,IS,,ISO 4019:2001,"Structural steels — Cold-formed, welded, structural hollow sections — Dimensions and sectional properties",Aciers de construction — Profils creux pour la construction soudés formés à froid — Dimensions et caractéristiques du profil,2001-09-13,2,['77.140.75'],ISO/TC 5/SC 1,9599,[9702],[52312],"['en','fr']",25,

9703,IS,,ISO 4020-1:1979,Road vehicles — Fuel filters for automotive compression ignition engines — Part 1: Test methods,Véhicules routiers — Filtres à combustible pour moteurs à combustion interne à allumage par compression — Partie 1: Méthodes d'essai,1979-06-01,1,['43.060.40'],ISO/TC 22,9599,,"[35468,25230]","['en','fr']",30,<p>Specifies the types of test for fuel filters according to their application. The filter classification is specified in ISO 4020-2. Applies to fuel filters having a rated flow of up to 200 l/h which are provided for motor vehicles with diesel engines and for test installations for injection equipment. This edition has been corrected and reprinted 1980.</p>

9705,IS,,ISO 4021:1977,Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system,Transmissions hydrauliques — Analyse de la pollution par particules — Prélèvement des échantillons de fluide dans les circuits en fonctionnement,1977-12-01,1,['23.100.60'],ISO/TC 131/SC 8,9599,,[9706],"['en','fr']",2,

9707,IS,,ISO 4022:1977,Permeable sintered metal materials — Determination of fluid permeability,Matériaux en métal fritté perméable — Détermination de la perméabilité aux fluides,1977-05-01,1,['77.160'],ISO/TC 119/SC 3,9599,,[9708],"['en','fr']",8,

9708,IS,,ISO 4022:1987,Permeable sintered metal materials — Determination of fluid permeability,Matériaux métalliques frittés perméables — Détermination de la perméabilité aux fluides,1987-09-24,2,['77.160'],ISO/TC 119/SC 3,9599,[9707],[72838],"['en','fr']",9,<p>This second edition cancels and replaces the first edition (i. e. ISO 4022:1977). The test is carried out under such conditions that the fluid permeability can be expressed in terms of viscous and inertia permeability coefficients (see annex A). Does not apply to very long hollow cylindrical test pieces of small diameter. Annex B gives test fluids.</p>

9709,IS,,ISO 4023:1981,Rubber hoses for steam — Methods of test,Tuyaux en caoutchouc pour la vapeur — Méthodes d'essai,1981-12-01,2,['23.040.70'],ISO/TC 45,9599,,[9710],"['en','fr']",5,

9710,IS,,ISO 4023:1991,Rubber hoses for steam — Test methods,Tuyaux en caoutchouc pour la vapeur — Méthodes d'essai,1991-10-03,3,['23.040.70'],ISO/TC 45/SC 1,9599,[9709],[50793],"['en','fr']",7,"<p>Specifies the following four test methods: A - vertical rack method; B - horizontal rack method; C - flexing test, vertical arrangement; D - flexing test, horizontal arrangement. This third edition cancels and replaces the second edition (1981).</p>"

9711,IS,,ISO 4024:1977,Road vehicles — Low tension cable connections for ignition coils,Véhicules routiers — Connexions des câbles à basse tension pour bobines d'allumage,1977-02-01,1,['43.060.50'],ISO/TC 22,9599,,[9712],"['en','fr']",1,

9713,IS,,ISO 4026:1977,Hexagon socket set screws with flat point,"Vis sans tête à six pans creux, à bout plat",1977-06-01,1,['21.060.10'],ISO/TC 2,9599,[7180],[9714],"['en','fr']",3,

9714,IS,,ISO 4026:1993,Hexagon socket set screws with flat point,"Vis sans tête à six pans creux, à bout plat",1993-12-16,2,['21.060.10'],ISO/TC 2,9599,[9713],"[26414,36431]","['en','fr']",6,"<p>Specifies the characteristics (dimensions, specifications, designation) for screws having threads from M1,6 up to and including M24 and of product grade A. If, in special cases, specifications other than those listed are required, they should be selected from existing international standards, e.g., ISO 261, ISO 888, ISO 898-5 and ISO 965-2. Annex A describes gauging of hexagon socket.</p>"

36431,IS,,ISO 4026:2003,Hexagon socket set screws with flat point,"Vis sans tête à six pans creux, à bout plat",2003-12-05,3,['21.060.10'],ISO/TC 2/SC 11,9599,[9714],[88194],"['en','fr']",4,"<p>ISO 4026:2003 specifies the characteristics of hexagon socket set screws with flat point and threads from M1,6 up to and including M24 and of product grade A.</p>"

9715,IS,,ISO 4027:1977,Hexagon socket set screws with cone point,"Vis sans tête à six pans creux, à bout conique",1977-08-01,1,['21.060.10'],ISO/TC 2,9599,[7180],[9716],"['en','fr']",3,

9716,IS,,ISO 4027:1993,Hexagon socket set screws with cone point,"Vis sans tête à six pans creux, à bout tronconique",1993-12-16,2,['21.060.10'],ISO/TC 2,9599,[9715],"[26415,36430]","['en','fr']",6,"<p>Specifies the characteristics (dimensions, specifications, designation) for screws having threads from M1,6 up to and including M24 and of product grade A. If, in special cases, specifications other than those listed are required, they should be selected from existing international standards, e.g., ISO 261, ISO 888, ISO 898-5 and ISO 965-2. Annex A describes gauging of hexagon socket.</p>"

36430,IS,,ISO 4027:2003,Hexagon socket set screws with cone point,"Vis sans tête à six pans creux, à bout tronconique",2003-12-05,3,['21.060.10'],ISO/TC 2/SC 11,9599,[9716],[88195],"['en','fr']",4,"<p>ISO 4027:2003 specifies the characteristics of hexagon socket set screws with cone point and threads from M1,6 up to and including M24 and of product grade A.</p>"

9717,IS,,ISO 4028:1977,Hexagon socket set screws with dog point,"Vis sans tête à six pans creux, à téton",1977-09-01,1,['21.060.10'],ISO/TC 2,9599,[7180],[9718],"['en','fr']",3,

9718,IS,,ISO 4028:1993,Hexagon socket set screws with dog point,"Vis sans tête à six pans creux, à téton",1993-12-16,2,['21.060.10'],ISO/TC 2,9599,[9717],"[36432,26353]","['en','fr']",6,"<p>Specifies the characteristics (dimensions, specifications, designation) for screws having threads from M1,6 up to and including M24 and of product grade A. If, in special cases, specifications other than those listed are required, they should be selected from existing international standards, e.g., ISO 261, ISO 888, ISO 898-5 and ISO 965-2. Annex A describes gauging of hexagon socket.</p>"

36432,IS,,ISO 4028:2003,Hexagon socket set screws with dog point,"Vis sans tête à six pans creux, à téton",2003-12-09,3,['21.060.10'],ISO/TC 2/SC 11,9599,[9718],[88196],"['en','fr']",4,"<p>ISO 4028:2003 specifies the characteristics of hexagon socket set screws with dog point and threads from M1,6 up to and including M24 and of product grade A.</p>"

9719,IS,,ISO 4029:1977,Hexagon socket set screws with cup point,"Vis sans tête à six pans creux, à cuvette",1977-06-01,1,['21.060.10'],ISO/TC 2,9599,[7180],[9720],"['en','fr']",3,

9720,IS,,ISO 4029:1993,Hexagon socket set screws with cup point,"Vis sans tête à six pans creux, à bout cuvette",1993-12-16,2,['21.060.10'],ISO/TC 2,9599,[9719],"[36433,26352]","['en','fr']",6,"<p>Specifies the characteristics (dimensions, specifications, designation) for screws having threads from M1,6 up to and including M24 and of product grade A. If, in special cases, specifications other than those listed are required, they should be selected from existing international standards, e.g., ISO 261, ISO 888, ISO 898-5 and ISO 965-2. Annex A describes gauging of hexagon socket.</p>"

36433,IS,,ISO 4029:2003,Hexagon socket set screws with cup point,"Vis sans tête à six pans creux, à bout cuvette",2003-12-09,3,['21.060.10'],ISO/TC 2/SC 11,9599,[9720],[88197],"['en','fr']",4,"<p>ISO 4029:2003 specifies the characteristics of hexagon socket set screws with cup point and threads from M1,6 up to and including M24 and of product grade A.</p>"

9722,IS,,ISO 4031:1978,Information interchange — Representation of local time differentials,Échange d'information — Représentation des différences d'heure légale,1978-12-01,1,['07.100.30'],ISO/TC 154,9599,,[15903],"['en','fr']",2,

9723,IS,,ISO 4032:1979,"Hexagon nuts, style 1 — Product grades A and B","Écrous hexagonaux, style 1 — Classes de produit A et B",1979-07-01,1,['21.060.20'],ISO/TC 2,9599,,[9724],"['en','fr']",4,

9724,IS,,ISO 4032:1986,"Hexagon nuts, style 1 — Product grades A and B","Écrous hexagonaux, style 1 — Grades A et B",1986-11-27,2,['21.060.20'],ISO/TC 2,9599,[9723],[26382],"['en','fr']",3,

26382,IS,,ISO 4032:1999,"Hexagon nuts, style 1 — Product grades A and B","Écrous hexagonaux, style 1 — Grades A et B",1999-08-26,3,['21.060.20'],ISO/TC 2/SC 12,9599,[9724],[61668],"['en','fr']",6,

61668,IS,,ISO 4032:2012,Hexagon regular nuts (style 1) — Product grades A and B,Écrous hexagonaux normaux (style 1) — Grades A et B,2012-12-13,4,['21.060.20'],ISO/TC 2/SC 12,9599,[26382],"[66017,75016]","['en','fr']",6,"<p>ISO 4032:2012 specifies the characteristics of hexagon regular nuts (style 1), with threads from M1,6 up to and including M64, with product grade A for threads of diameter less than or equal to M16 and product grade B for threads of diameter greater than M16.</p>"

9725,IS,,ISO 4033:1979,"Hexagon nuts, style 2 — Product grades A and B","Écrous hexagonaux, style 2 — Grades A et B",1979-06-01,1,['21.060.20'],ISO/TC 2,9599,,[26383],"['en','fr']",4,

26383,IS,,ISO 4033:1999,"Hexagon nuts, style 2 — Product grades A and B","Écrous hexagonaux, style 2 — Grades A et B",1999-08-26,2,['21.060.20'],ISO/TC 2/SC 12,9599,[9725],[61669],"['en','fr']",5,

61669,IS,,ISO 4033:2012,Hexagon high nuts (style 2) — Product grades A and B,Écrous hexagonaux hauts (style 2) — Grades A et B,2012-12-13,3,['21.060.20'],ISO/TC 2/SC 12,9599,[26383],"[66018,75017]","['en','fr']",6,"<p>ISO 4033:2012 specifies the characteristics of hexagon high nuts (style 2), with threads from M5 up to and including M36, with product grade A for threads of diameter less than or equal to M16 and product grade B for threads of diameter greater than M16.</p>"

9726,IS,,ISO 4034:1979,Hexagon nuts — Product grade C,Écrous hexagonaux — Classe de produit C,1979-06-01,1,['21.060.20'],ISO/TC 2,9599,,[9727],['en'],4,

9727,IS,,ISO 4034:1986,Hexagon nuts — Product grade C,Écrous hexagonaux — Grade C,1986-11-27,2,['21.060.20'],ISO/TC 2,9599,[9726],[26384],"['en','fr']",3,

26384,IS,,ISO 4034:1999,Hexagon nuts — Product grade C,Écrous hexagonaux — Grade C,1999-08-26,3,['21.060.20'],ISO/TC 2/SC 12,9599,[9727],[61670],"['en','fr']",5,

61670,IS,,ISO 4034:2012,Hexagon regular nuts (style 1) — Product grade C,Écrous hexagonaux normaux (style 1) — Grade C,2012-12-13,4,['21.060.20'],ISO/TC 2/SC 12,9599,[26384],"[66019,75018]","['en','fr']",5,<p>ISO 4034:2012 specifies the characteristics of hexagon regular nuts (style 1) with threads from M5 up to and including M64 and product grade C.</p>

63632,IS,Cor,ISO 4034:2012/Cor 1:2013,Hexagon regular nuts (style 1) — Product grade C — Technical Corrigendum 1,Écrous hexagonaux normaux (style 1) — Grade C — Rectificatif technique 1,2013-03-25,4,['21.060.20'],ISO/TC 2/SC 12,9599,,[75018],['fr'],,

9728,IS,,ISO 4035:1979,Hexagon thin nuts — Product grades A and B (chamfered),Écrous bas hexagonaux — Classes de produit A et B (chanfreinés),1979-06-01,1,['21.060.20'],ISO/TC 2,9599,,[9729],['en'],4,

9729,IS,,ISO 4035:1986,Hexagon thin nuts (chamfered) — Product grades A and B,Écrous bas hexagonaux (chanfreinés) — Grades A et B,1986-11-27,2,['21.060.20'],ISO/TC 2,9599,[9728],[26385],"['en','fr']",3,

26385,IS,,ISO 4035:1999,Hexagon thin nuts (chamfered) — Product grades A and B,Écrous bas hexagonaux (chanfreinés) — Grades A et B,1999-08-26,3,['21.060.20'],ISO/TC 2/SC 12,9599,[9729],[61671],"['en','fr']",6,

61671,IS,,ISO 4035:2012,Hexagon thin nuts chamfered (style 0) — Product grades A and B,Écrous bas hexagonaux chanfreinés (style 0) — Grades A et B,2012-12-14,4,['21.060.20'],ISO/TC 2/SC 12,9599,[26385],"[75019,66020]","['en','fr']",6,"<p>ISO 4035:2012 specifies the characteristics of chamfered hexagon thin nuts (style 0), with threads from M1,6 up to and including M64, with product grade A for threads of diameter less than or equal to M16 and product grade B for threads of diameter greater than M16.</p>"

9730,IS,,ISO 4036:1979,Hexagon thin nuts — Product grade B (unchamfered),Écrous bas hexagonaux — Grade B (sans chanfrein),1979-06-01,1,['21.060.20'],ISO/TC 2,9599,,[26386],"['en','fr']",3,

26386,IS,,ISO 4036:1999,Hexagon thin nuts (unchamfered) — Product grade B,Écrous bas hexagonaux (sans chanfrein) — Grade B,1999-08-26,2,['21.060.20'],ISO/TC 2/SC 12,9599,[9730],[61672],"['en','fr']",5,

20781,IS,,ISO 4037-1:1996,X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 1: Radiation characteristics and production methods,"Rayonnements X et gamma de référence pour l'étalonnage des dosimètres et des débitmètres, et pour la détermination de leur réponse en fonction de l'énergie des photons — Partie 1: Caractéristiques des rayonnements et méthodes de production",1996-12-12,1,['17.240'],ISO/TC 85/SC 2,9599,"[9734,9731]",[66872],"['en','fr']",42,<p>Specifies the characteristics and production methods of X and gamma reference radiation for calibrating dosemeters and rate dosemeters at air

9731,IS,,ISO 4037:1979,X and gamma reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy,Rayonnements X et gamma de référence pour l'étalonnage des dosimètres et débitmètres et pour la détermination de leur réponse en fonction de l'énergie des photons,1979-05-01,1,['17.240'],ISO/TC 85,9599,,"[20781,23726]","['en','fr']",32,

9734,IS,Amd,ISO 4037:1979/Amd 1:1983,X and gamma reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy — Amendment 1: Low rate series of filtered X-radiations,Rayonnements X et gamma de référence pour l'étalonnage des dosimètres et débitmètres et pour la détermination de leur réponse en fonction de l'énergie des photons — Amendement 1: Rayonnements X filtrés à faible débit,1983-09-01,1,['17.240'],ISO/TC 85/SC 2,9599,,"[20781,23726]","['en','fr']",2,

23726,IS,,ISO 4037-2:1997,"X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV","Rayonnements X et gamma de référence pour l'étalonnage des dosimètres et des débitmètres, et pour la détermination de leur réponse en fonction de l'énergie des photons — Partie 2: Dosimétrie pour la radioprotection dans les gammes d'énergie de 8 keV à 1,3 MeV et de 4 MeV à 9 MeV",1997-12-18,1,['17.240'],ISO/TC 85/SC 2,9599,"[9734,9731]",[66873],"['en','fr']",29,

23727,IS,,ISO 4037-3:1999,X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence,Rayonnements X et gamma de référence pour l'étalonnage des dosimètres et des débitmètres et pour la détermination de leur réponse en fonction de l'énergie des photons — Partie 3: Étalonnage des dosimètres de zone (ou d'ambiance) et individuels et mesurage de leur réponse en fonction de l'énergie et de l'angle d'incidence,1999-07-01,1,['17.240'],ISO/TC 85/SC 2,9599,,"[66874,41228]","['en'

32192,IS,,ISO 4037-4:2004,X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields,Rayonnements X et gamma de référence pour l'étalonnage des dosimètres et des débitmètres et pour la détermination de leur réponse en fonction de l'énergie des photons — Partie 4: Étalonnage des dosimètres de zone (ou d'ambiance) et individuels dans des champs de référence X de faible énergie,2004-10-06,1,['17.240'],ISO/TC 85/SC 2,9599,,[66165],"['en','fr']",19,"<p>ISO 4037-4:2004 gives guidelines on additional aspects of the cha

9735,IS,,ISO 4038:1977,"Road vehicles — Hydraulic braking systems — Pipes, tapped holes and male fittings","Véhicules routiers — Systèmes de freinage hydraulique — Tuyauteries, logements et raccords mâles",1977-07-01,1,['43.040.40'],ISO/TC 22,9599,,"[9736,9737]",['en'],4,

9736,IS,,ISO 4038:1984,"Road vehicles — Hydraulic braking systems — Pipes, tapped holes, male fittings and hose end fittings","Véhicules routiers — Systèmes de freinage hydraulique — Tuyauteries, logements, raccords mâles et embouts de flexible",1984-02-01,2,"['83.140','43.040.40']",ISO/TC 22,9599,[9735],[9737],"['en','fr']",8,

9738,IS,,ISO 4039:1977,"Road vehicles — Pneumatic braking systems — Pipes, tapped holes and male fittings","Véhicules routiers — Systèmes de freinage pneumatique — Tuyauteries, logements et raccords mâles",1977-06-01,1,['43.040.40'],ISO/TC 22,9599,,[9739],"['en','fr']",1,

4404,IS,,ISO 404:1981,Steel and steel products — General technical delivery requirements,Acier et produits sidérurgiques — Conditions générales techniques de livraison,1981-04-01,1,"['77.080.20','77.140.01']",ISO/TC 17/SC 20,9599,,[4405],"['en','fr']",6,

4405,IS,,ISO 404:1992,Steel and steel products — General technical delivery requirements,Aciers et produits sidérurgiques — Conditions générales techniques de livraison,1992-07-02,2,"['77.080.20','77.140.01']",ISO/TC 17/SC 20,9599,[4404],[56861],"['en','fr']",13,"<p>Specifies the requirements and associated inspection and testing including retests for all steel products covered by ISO 6929, with the exception of steel castings and powder metallurgical products. The requirements concern chemical composition, mechanical properties, and surface and internal quality.</p>"

9740,IS,,ISO 4040:1983,"Road vehicles — Passenger cars — Location of hand controls, indicators and tell-tales","Véhicules routiers — Voitures particulières — Localisation des commandes manuelles, des indicateurs et des témoins",1983-05-01,2,['43.040.30'],ISO/TC 22,9599,,[9741],"['en','fr']",7,

9741,IS,,ISO 4040:1997,"Passenger cars — Location of hand controls, indicators and tell-tales","Voitures particulières — Emplacement des commandes manuelles, des indicateurs et des témoins",1997-06-05,3,['43.040.30'],ISO/TC 22,9599,[9740],[33295],"['en','fr']",8,

33295,IS,,ISO 4040:2001,"Road vehicles — Location of hand controls, indicators and tell-tales in motor vehicles","Véhicules routiers — Emplacement des commandes manuelles, des indicateurs et des témoins sur les véhicules à moteur",2001-12-13,4,['43.040.30'],ISO/TC 22,9599,[9741],[44856],['en'],9,

9743,IS,,ISO 4042:1989,Threaded components — Electroplated coatings,Composants filetés — Revêtements électrolytiques,1989-12-21,1,['21.060.01'],ISO/TC 2,9599,,[25454],"['en','fr']",13,

25454,IS,,ISO 4042:1999,Fasteners — Electroplated coatings,Éléments de fixation — Revêtements électrolytiques,1999-07-01,2,['21.060.01'],ISO/TC 2/SC 14,9599,[9743],"[55925,69348]","['en','fr']",23,

69348,IS,,ISO 4042:2018,Fasteners — Electroplated coating systems,Fixations — Systèmes de revêtements électrolytiques,2018-08-13,3,['21.060.01'],ISO/TC 2/SC 14,9599,[25454],[77913],"['en','fr']",55,"<p>This document specifies requirements for electroplated coatings and coating systems on steel fasteners. The requirements related to dimensional properties also apply to fasteners made of copper or copper alloys.</p><p>It also specifies requirements and gives recommendations to minimize the risk of hydrogen embrittlement; see 4.4 and Annex B.</p><p>It mainly applies to zinc and zinc alloy coating systems (zinc, zinc-nickel, zinc-iron) and cadmium, primarily intended for corrosion protection and

9744,IS,,ISO 4043:1981,Booths for simultaneous interpretation — Mobile booths — General characteristics and equipment,Cabines d'interprétation simultanée — Cabines transportables — Caractéristiques générales et équipement,1981-02-01,1,['91.040.10'],ISO/TC 43,9599,,[1763],"['en','fr']",4,

1763,IS,,ISO 4043:1998,Mobile booths for simultaneous interpretation — General characteristics and equipment,Cabines d'interprétation simultanée transportables — Caractéristiques générales et équipement,1998-11-26,2,['91.040.10'],ISO/TC 43/SC 2,9599,[9744],[67066],"['en','fr']",8,

67066,IS,,ISO 4043:2016,Simultaneous interpreting — Mobile booths — Requirements,Interprétation simultanée — Cabines transportables — Exigences,2016-12-02,3,['91.040.10'],ISO/TC 37/SC 5,9599,[1763],[85015],"['en','fr']",11,"<p>ISO 4043:2016 provides requirements and recommendations for the manufacturing of mobile simultaneous interpreting booths. The main features of mobile booths that distinguish them from permanent simultaneous interpreting booths are that they can be dismantled, moved and set up in a conference room not equipped with permanent booths. This document also ensures the usability and accessibility of booths for all interpreters, including those with special needs.</p><p>Requir

9746,IS,,ISO 4044:1977,Leather — Preparation of chemical test samples,Cuir — Préparation des échantillons pour essais chimiques,1977-09-01,1,['59.140.30'],IULTCS,9599,,[43409],"['en','fr']",1,"<p>The principle consists in grinding of pieces of the leather using of cutter mill. Specification of apparatus (cutter mill), preparation and storage of test sample. The method is applicable to all leathers of all types and tannage.</p>"

43409,IS,,ISO 4044:2008,Leather — Chemical tests — Preparation of chemical test samples,Cuir — Essais chimiques - Préparation des échantillons pour essais chimiques,2008-02-07,2,['59.140.30'],IULTCS,9599,[9746],[67098],"['en','fr']",2,<p>ISO 4044:2008 specifies a method for the preparation of a test sample of leather for chemical analysis. This method is applicable to all types of leather.</p>

9747,IS,,ISO 4045:1977,Leather — Determination of pH,Cuir — Détermination du pH,1977-09-01,1,['59.140.30'],IULTCS,9599,,[43410],"['en','fr']",2,"<p>The principle consists in preparation of an aqueous extract from a test portion of the leather, and measurement of the pH of the extract, using a pH meter. The definition of a difference figure of an aqueous leather extract is given. Reagents, apparatus, procedure and the test report are specified.</p>"

43410,IS,,ISO 4045:2008,Leather — Chemical tests — Determination of pH,Cuir — Essais chimiques - Détermination du pH,2008-02-07,2,['59.140.30'],IULTCS,9599,[9747],[73701],"['en','fr']",3,<p>ISO 4045:2008 specifies a method for determining the pH value and the difference figure of an aqueous leather extract. It is applicable to all types of leather.</p>

29836,IS,,ISO 4046-1:2002,"Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index","Papier, carton, pâtes et termes connexes — Vocabulaire — Partie 1: Index alphabétique",2002-10-10,1,"['85.020','01.040.85','85.060','85.040']",ISO/TC 6,9599,[9748],[69829],"['en','fr']",13,"ISO 4046-1:2002 is an alphabetical index of English and French terms which are defined in the ISO 4046 series of standards, which document the terminology of paper, board, pulp and related terms."

9748,IS,,ISO 4046:1978,"Paper, board, pulp and related terms — Vocabulary","Papier, carton, pâtes et termes connexes — Vocabulaire",1978-11-01,1,"['01.040.85','85.060','85.040']",ISO/TC 6,9599,"[5881,3704,4114,4348,3948,6602]","[29837,29838,32383,29839,29836]","['en','fr']",48,"<p>Includes the sections Pulp - Genenral Terms, Pulp Manufacture, Types of Pulp, Paper and Board - General Terms, Paper Marking, Types of Paper and Board - Converted Products, Properties of Pulp, Paper or Board, and has French and English indexes attached to it.</p>"

29837,IS,,ISO 4046-2:2002,"Paper, board, pulps and related terms — Vocabulary — Part 2: Pulping terminology","Papier, carton, pâtes et termes connexes — Vocabulaire — Partie 2: Terminologie de la fabrication de la pâte",2002-10-10,1,"['01.040.85','85.040']",ISO/TC 6,9599,[9748],[69831],"['en','fr']",11,ISO 4046-2:2002 defines terms related to pulping in both English and French.

29838,IS,,ISO 4046-3:2002,"Paper, board, pulps and related terms — Vocabulary — Part 3: Paper-making terminology","Papier, carton, pâtes et termes connexes — Vocabulaire — Partie 3: Terminologie de la fabrication du papier",2002-10-10,1,"['85.020','01.040.85']",ISO/TC 6,9599,[9748],[69832],"['en','fr']",25,"<p>ISO 4046-3:2002 defines terms relatied to paper making, in both English and French.</p>"

29839,IS,,ISO 4046-4:2002,"Paper, board, pulps and related terms — Vocabulary — Part 4: Paper and board grades and converted products","Papier, carton, pâtes et termes connexes — Vocabulaire — Partie 4: Catégories et produits transformés de papier et de carton",2002-10-10,1,"['01.040.85','85.060']",ISO/TC 6,9599,[9748],[69833],"['en','fr']",29,"<p>ISO 4046-4:2002 defines terms related to paper and board grades and converted products, in both English and French.</p>"

32383,IS,,ISO 4046-5:2002,"Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper and board","Papier, carton, pâtes et termes connexes — Vocabulaire — Partie 5: Propriétés de la pâte, du papier et du carton",2002-10-10,1,"['01.040.85','85.060','85.040']",ISO/TC 6,9599,[9748],[69834],"['en','fr']",28,"<p>ISO 4046-5:2002 defines terms related to properties of pulp, paper and board, in both English and French.</p>"

9750,IS,,ISO 4048:1977,Leather — Determination of matter soluble in dichloromethane,Cuir — Dosage des matières solubles dans le dichlorométhane,1977-11-01,1,['59.140.30'],IULTCS,9599,,[43411],"['en','fr']",2,"<p>The apparatus and procedure specified are suitable for the extraction of all types of leather by dichlormethane or other solvents. Brief description of principle, reagents, apparatus, sampling, procedure and test report.</p>"

43411,IS,,ISO 4048:2008,Leather — Chemical tests — Determination of matter soluble in dichloromethane and free fatty acid content,Cuir — Essais chimiques — Dosage des matières solubles dans le dichlorométhane et des acides gras libres,2008-02-07,2,['59.140.30'],IULTCS,9599,[9750],[73702],"['en','fr']",6,"<p>ISO 4048:2008 specifies a method for the determination of the substances in leather which are soluble in dichloromethane. This method is applicable to all types of leather</p><p>ISO 4048:2008 includes two techniques for extraction of the fatty substances: 1) extraction using the Soxhlet apparatus; and 2) extraction using a pressurized extraction system. As the extraction is frequently don

9751,IS,,ISO 4049:1978,Resin-based dental filling materials,Produits d'obturation dentaire à base de résine synthétique,1978-04-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[9752],"['en','fr']",7,

9752,IS,,ISO 4049:1988,Dentistry — Resin-based filling materials,Art dentaire — Produits d'obturation à base de résines synthétiques,1988-12-29,2,['11.060.10'],ISO/TC 106/SC 1,9599,[9751],[23041],"['en','fr']",11,

20110,IS,Cor,ISO 4049:1988/Cor 1:1992,Dentistry — Resin-based filling materials — Technical Corrigendum 1,Art dentaire — Produits d'obturation à base de résines synthétiques — Rectificatif technique 1,1992-01-23,2,['11.060.10'],ISO/TC 106/SC 1,9599,,[23041],"['en','fr']",1,

23041,IS,,ISO 4049:2000,"Dentistry — Polymer-based filling, restorative and luting materials","Art dentaire — Produits d'obturation, de restauration et de scellement à base de polymères",2000-07-27,3,['11.060.10'],ISO/TC 106/SC 1,9599,"[20110,9752]",[42898],"['en','fr']",27,

42898,IS,,ISO 4049:2009,Dentistry — Polymer-based restorative materials,Art dentaire — Produits de restauration à base de polymères,2009-09-16,4,['11.060.10'],ISO/TC 106/SC 1,9599,[23041],[67596],"['en','fr']",28,"<p>ISO 4049:2009 specifies requirements for dental polymer-based restorative materials supplied in a form suitable for mechanical mixing, hand-mixing, or intra-oral and extra-oral external energy activation, and intended for use primarily for the direct or indirect restoration of cavities in the teeth and for luting.</p><p>The polymer-based luting materials covered by ISO 4049:2009 are intended for use in the cementation or fixation of restorations and appliances such as inlays, on

9754,IS,,ISO 4050-2:1980,Shipbuilding — Inland vessels — Anchors — Part 2: Matrosov anchors,Construction navale — Bateaux de navigation intérieure — Ancres — Partie 2: Ancres Matrosov,1980-04-01,1,['47.060'],ISO/TC 8/SC 7,9599,,[17139],"['en','fr']",3,

9756,IS,,ISO 4052:1983,Coffee — Determination of caffeine content (Reference method),Cafés — Détermination de la teneur en caféine — Méthode de référence,1983-06-01,1,['67.140.20'],ISO/TC 34/SC 15,9599,,"[33995,24198]","['en','fr']",6,"<p>The method consists in extracting of the caffeine from a test portion, in an ammoniacal medium, successive purifying, with diethyl ether, on two chromatographic columns, the first in an alkaline medium, the second in an acid medium, followed by elution by chloroform. Spectrometric measurement of the eluate at the wavelength of maximum absorbance (in the ultraviolet region). A first figure shows examples of chromatographic columns. A second figure gives an e

9762,IS,,ISO 4056:1978,"Polyethylene (PE) pipes and fittings — Designation of polyethylene, based on nominal density and melt flow index","Tubes et raccords en polyéthylène (PE) — Désignation du polyéthylène, basée sur la masse volumique nominale et sur l'indice de fluidité à chaud",1978-08-01,1,"['23.040.45','23.040.20']",ISO/TC 138,9599,,"[21062,9763]","['en','fr']",1,"<p>Polyethylene material for pipe production ist designated in terms of a figure code. The first group of figures consists of the second and third significant figure of nominal density, the second group consists of the melt flow index multiplied by 100.</p>"

9764,IS,,ISO 4057:1979,"Information processing — Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded","Traitement de l'information — Cassette de bande magnétique de 6,30 mm (o,25 in) pour l'échange d'information par codage de phase à 63 bpmm (1 600 bpi)",1979-05-01,1,['35.220.23'],ISO/IEC JTC 1,9599,,[9765],['en'],31,

4407,IS,,ISO 406:1982,Technical drawings — Linear and angular tolerancing — Indications on drawings,Dessins techniques — Tolérancement linéaire et angulaire — Indications sur les dessins,1982-10-01,1,['01.100.01'],ISO/TC 10,9599,,[4408],"['en','fr']",3,

4408,IS,,ISO 406:1987,Technical drawings — Tolerancing of linear and angular dimensions,Dessins techniques — Tolérancement de dimensions linéaires et angulaires,1987-09-17,2,['01.100.01'],ISO/TC 213,9599,[4407],"[29016,29015,34052,54013]","['en','fr']",4,"<p>This second edition constitutes a technical revision. Indications were written in upright lettering, but they could just as well be made in free-hand or inclined (italic) lettering without altering the meaning. For the presentation of lettering (proportions and dimensions) see ISO 3098-1. Tolerancing does not necessarily imply the use of any paticular method of production, measurement or gauging.</p>"

9768,IS,,ISO 4062:1977,Dictation equipment — Symbols,Systèmes de dictée — Symboles,1977-11-01,1,"['01.080.20','35.260']",ISO/IEC JTC 1,9599,,[21486],"['en','fr']",5,<p>Includes symbols to be displayed on dictation equipment where they are used for the marking of controls and certain other parts of the devides.</p>

9769,IS,,ISO 4063:1978,"Welding, brazing, braze welding and soldering of metals — List of processes, for symbolic representation on drawings",Soudage et brasage des métaux — Liste des procédés pour la représentation symbolique sur les dessins,1978-04-01,1,['25.160.01'],ISO/TC 44,9599,,[9770],"['en','fr']",4,

9770,IS,,ISO 4063:1990,"Welding, brazing, soldering and braze welding of metals — Nomenclature of processes and reference numbers for symbolic representation on drawings","Soudage, brasage fort, brasage tendre et soudobrasage des métaux — Liste des procédés et des numérotations pour la représentation symbolique sur les dessins",1990-01-18,2,"['25.160.10','25.160.50','01.100.01']",ISO/TC 44/SC 7,9599,[9769],[21100],"['en','fr']",7,

21100,IS,,ISO 4063:1998,Welding and allied processes — Nomenclature of processes and reference numbers,Soudage et techniques connexes — Nomenclature et numérotation des procédés,1998-09-03,3,"['25.160.01','01.040.25']",ISO/TC 44/SC 7,9599,[9770],[38134],"['en','fr']",8,

38134,IS,,ISO 4063:2009,Welding and allied processes — Nomenclature of processes and reference numbers,Soudage et techniques connexes — Nomenclature et numérotation des procédés,2009-07-23,4,"['25.160.01','01.040.25']",ISO/TC 44/SC 7,9599,[21100],[75108],"['de','en','fr']",21,"<p>ISO 4063:2009 establishes a nomenclature for welding and allied processes, with each process identified by a reference number.</p><p>ISO 4063:2009 covers the main groups of processes (one digit), groups (two digits) and sub-groups (three digits). The reference number for any process has a maximum of three digits. This system is intended as an aid in computerization, drawings, the drafting of working papers, welding

9771,IS,,ISO 4064-1:1977,Measurement of water flow in closed conduits — Meters for cold potable water — Part 1: Specification,Mesurage de débit d'eau dans les conduites fermées — Compteurs d'eau potable froide — Partie 1: Spécifications,1977-12-01,1,['91.140.60'],ISO/TC 30,9599,,[9772],"['en','fr']",6,

9772,IS,,ISO 4064-1:1993,Measurement of water flow in closed conduits — Meters for cold potable water — Part 1: Specifications,Mesurage de débit d'eau dans les conduites fermées — Compteurs d'eau potable froide — Partie 1: Spécifications,1993-05-20,2,['91.140.60'],ISO/TC 30/SC 7,9599,[9771],[36682],"['en','fr']",10,"<p>Deals with terminology, technical characteristics, metrological characteristics and pressure loss. Applies to water meters of various metrological classes which can withstand permanent flow-rates from 0,6 m^3/h to 4000 m^3/h, maximum admissible working pressures equal to or greater than 10 bar and a maximum admissible temperature of 30 °C. Legal requirements take precedence ov

36682,IS,,ISO 4064-1:2005,Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 1: Specifications,Mesurage de débit d'eau dans les conduites fermées en pleine charge — Compteurs d'eau potable froide et d'eau chaude — Partie 1: Spécifications,2005-10-21,3,['91.140.60'],ISO/TC 30/SC 7,9599,"[20465,9772,18449]","[55371,55384]",['en'],42,"<p>ISO 4064-1:2005 specifies terminology, technical characteristics, metrological characteristics and pressure loss requirements for cold potable water and hot water meters. It applies to water meters that can withstand maximum admissible working pressures (MAP) at least 1 MPa (0,6 MPa for meters for use

55371,IS,,ISO 4064-1:2014,Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements,Compteurs d'eau potable froide et d'eau chaude — Partie 1: Exigences métrologiques et techniques,2014-05-26,4,['91.140.60'],ISO/TC 30/SC 7,9599,[36682],[80868],"['en','fr']",38,"<p>ISO 4064-1:2014|OIML R 49-1:2013 specifies metrological and technical requirements of water meters for cold potable water and hot water flowing through a fully charged, closed conduit. These water meters incorporate devices which indicate the integrated volume.</p><p>In addition to water meters based on mechanical principles, ISO 4064-1:2014|OIML R 49-1:2013 applies to devices based on elec

9773,IS,,ISO 4064-2:1978,Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements,Mesurage de débit d'eau dans les conduites fermées — Compteurs d'eau potable froide — Partie 2: Conditions d'installation,1978-12-01,1,['91.140.60'],ISO/TC 30/SC 7,9599,,[33584],"['en','fr']",2,

9774,IS,Add,ISO 4064-2:1978/Add 1:1983,Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements — Addendum 1: Parallel and multiple meter operation,Mesurage de débit d'eau dans les conduites fermées — Compteurs d'eau potable froide — Partie 2: Conditions d'installation — Additif 1: Compteurs fonctionnant en parallèle et en groupe,1983-09-01,1,['91.140.60'],ISO/TC 30,9599,,[33584],"['en','fr']",2,

33584,IS,,ISO 4064-2:2001,Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements and selection,Mesurage de débit d'eau dans les conduites fermées — Compteurs d'eau potable froide — Partie 2: Conditions d'installation et choix,2001-06-07,2,['91.140.60'],ISO/TC 30/SC 7,9599,"[9773,9774]",[36683],"['en','fr']",7,

36683,IS,,ISO 4064-2:2005,Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 2: Installation requirements,Mesurage de débit d'eau dans les conduites fermées en pleine charge — Compteurs d'eau potable froide et d'eau chaude — Partie 2: Conditions d'installation,2005-10-21,3,['91.140.60'],ISO/TC 30/SC 7,9599,"[31133,33584]",[55386],['en'],10,"<p>ISO 4064-2:2005 specifies criteria for the selection of single, combination and concentric water meters, associated fittings, installation, special requirements for meters and the first operation of new or repaired meters to ensure accurate constant measurement and reliable reading of the met

55383,IS,,ISO 4064-2:2014,Water meters for cold potable water and hot water — Part 2: Test methods,Compteurs d'eau potable froide et d'eau chaude — Partie 2: Méthodes d'essai,2014-05-26,4,['91.140.60'],ISO/TC 30/SC 7,9599,[36684],[80869],"['en','fr']",101,"<p>ISO 4064-2:2014|OIML R 49-2:2013 is applicable to the type evaluation and initial verification testing of water meters for cold potable water and hot water as defined in ISO 4064‑1:2014|OIML R 49‑1:2013. OIML Certificates of Conformity can be issued for water meters under the scope of the OIML Certificate System, provided that ISO 4064-2:2014|OIML R 49-2:2013, ISO 4064‑1:2014|OIML R 49‑1:2013 and ISO 4064‑3:2014|OIML R 49‑3:2013 are use

9775,IS,,ISO 4064-3:1983,Measurement of water flow in closed conduits — Meters for cold potable water — Part 3: Test methods and equipment,Mesurage de débit d'eau dans les conduites fermées — Compteurs d'eau potable froide — Partie 3: Méthodes et matériels d'essais,1983-09-01,1,['91.140.60'],ISO/TC 30/SC 7,9599,,[20464],"['en','fr']",16,

20464,IS,,ISO 4064-3:1999,Measurement of water flow in closed conduits — Meters for cold potable water — Part 3: Test methods and equipment,Mesurage de débit d'eau dans les conduites fermées — Compteurs d'eau potable froide — Partie 3: Méthodes et matériels d'essais,1999-05-06,2,['91.140.60'],ISO/TC 30/SC 7,9599,[9775],[36684],"['en','fr']",24,