Withdrawn and superseded ISO standards — page 111 of 246

9500,IS,,ISO 3894:1977,Road vehicles — Trucks — Wheels/rims — Test methods,Véhicules routiers — Véhicules utilitaires — Roues/jantes — Méthodes d'essai,1977-06-01,1,['43.040.50'],ISO/TC 22,9599,,[9501],"['en','fr']",10,

9501,IS,,ISO 3894:1995,Commercial vehicles — Wheels/rims — Test methods,Véhicules utilitaires — Roues/jantes — Méthodes d'essai,1995-02-02,2,['43.040.50'],ISO/TC 22,9599,[9500],[39421],"['en','fr']",9,"<p>Specifies three laboratory methods for testing certain essential strength characteristics of disc wheels, spoke wheels and demountable rim wheels intended for road use on commercial vehicles, buses, trailers and multipurpose passenger vehicles, as defined in ISO 3833. The test methods are dynamic cornering fatigue tests for disc wheels, dynamic radial fatigue tests for disc wheels and wheels with demountable rims and a dynamic cornering test for wheels with demountable rims.</p>"

39421,IS,,ISO 3894:2005,Road vehicles — Wheels/rims for commercial vehicles — Test methods,Véhicules routiers — Roues/jantes pour véhicules utilitaires — Méthodes d'essai,2005-04-14,3,['43.040.50'],ISO/TC 22/SC 33,9599,[9501],[60209],"['en','fr','ru']",10,"<p>ISO 3894:2005 specifies three laboratory methods for testing certain essential strength characteristics of disc wheels, spoke wheels and demountable rims intended for road use on commercial vehicles, buses, trailers and multipurpose passenger vehicles, as defined in ISO 3833.</p><p>The test methods are</p><ul><li>disc wheel dynamic cornering fatigue tests;</li><li>disc wheels and wheels with demountable rims - dynamic radial fatigue tes

60209,IS,,ISO 3894:2015,Road vehicles — Wheels/rims for commercial vehicles — Test methods,Véhicules routiers — Roues/jantes pour véhicules utilitaires — Méthodes d'essai,2015-08-05,4,['43.040.50'],ISO/TC 22/SC 33,9599,[39421],"[83235,72673]","['en','fr']",9,"<p>ISO 3894:2015 specifies two laboratory methods for testing certain essential strength characteristics of disc wheels intended for road use on commercial vehicles, buses, trailers, and multipurpose passenger vehicles, as defined in ISO 3833.</p><p>The test methods are</p><p>? dynamic cornering fatigue test and</p><p>? dynamic radial fatigue test.</p>"

9502,IS,,ISO 3895:1979,Road vehicles — Screened and waterproof spark plug and its connection — Type 2,Véhicules routiers — Bougie d'allumage blindée et étanche et sa connexion — Type 2,1979-12-01,2,['43.060.50'],ISO/TC 22,9599,,[9503],"['en','fr']",3,

9504,IS,,ISO 3896:1979,Road vehicles — Screened and waterproof spark plug and its connection — Type 3,Véhicules routiers — Bougie d'allumage blindée et étanche et sa connexion — Type 3,1979-12-01,2,['43.060.50'],ISO/TC 22,9599,,[9505],"['en','fr']",3,

9506,IS,,ISO 3897:1976,Photography — Silver image photographic plates for record purposes — Storage conditions,Photographie — Plaques photographiques à image argentique pour archivage — Conditions de conservation,1976-11-01,1,['37.040.20'],ISO/TC 42,9599,,"[9507,9508]","['en','fr']",7,

9507,IS,,ISO 3897:1986,Photography — Processed photographic plates — Storage practices,Photographie — Plaques photographiques développées — Directives pour l'archivage,1986-09-18,2,['37.040.20'],ISO/TC 42,9599,[9506],[9508],"['en','fr']",11,

9508,IS,,ISO 3897:1992,Photography — Processed photographic plates — Storage practices,Photographie — Plaques photographiques développées — Directives pour l'archivage,1992-12-10,3,['37.040.20'],ISO/TC 42,9599,"[9507,9506]",[27321],"['en','fr']",10,

27321,IS,,ISO 3897:1997,Photography — Processed photographic plates — Storage practices,Photographie — Plaques photographiques développées — Directives pour l'archivage,1997-12-04,4,['37.040.20'],ISO/TC 42,9599,[9508],[31115],['en'],17,

9509,IS,,ISO 3898:1976,Bases for design of structures — Notations — General symbols,Bases du calcul des constructions — Notations — Symboles généraux,1976-09-01,1,['91.080.01'],ISO/TC 98,9599,,[9510],"['en','fr']",4,

9511,IS,Add,ISO 3898:1976/Add 1:1982,Bases for design of structures — Notations — General symbols — Addendum 1,Bases du calcul des constructions — Notations — Symboles généraux — Additif 1,1982-09-01,1,['91.080.01'],ISO/TC 98/SC 1,9599,,[9510],['en'],3,

9510,IS,,ISO 3898:1987,Bases for design of structures — Notations — General symbols,Bases du calcul des constructions — Notations — Symboles généraux,1987-12-17,2,['91.080.01'],ISO/TC 98/SC 1,9599,"[9511,9509]",[25286],"['en','fr']",7,

25286,IS,,ISO 3898:1997,Bases for design of structures — Notations — General symbols,Bases du calcul des constructions — Notations — Symboles généraux,1997-08-07,3,['91.080.01'],ISO/TC 98/SC 1,9599,[9510],"[55262,39917]","['en','fr']",10,

9512,IS,,ISO 3899:1976,Rubber — Nitrile latex — Determination of residual acrylonitrile content,Caoutchouc — Latex de nitrile — Détermination de la teneur en acrylonitrile résiduaire,1976-08-01,1,['83.040.10'],ISO/TC 45,9599,,[9513],"['en','fr']",2,

9513,IS,,ISO 3899:1988,Rubber — Nitrile latex — Determination of residual acrylonitrile content,Caoutchouc — Latex de nitrile — Détermination de la teneur en acrylonitrile résiduel,1988-12-01,2,['83.040.10'],ISO/TC 45/SC 2,9599,[9512],[41624],"['en','fr']",2,"<p>Refers to latices with a residual acrylonitrile content of less than 0.2 % (m/m). Test portions of latex are distilled, the distillate is collected in methanol. Addition of n-dodecyl mercaptan to the distillate and titration of the excess with a standard iodine solution. - Replaces the first edition (ISO 3899:1976) and constitutes a minor revision.</p>"

4379,IS,,ISO 390:1977,Asbestos-cement products — Sampling and inspection,Produits en amiante-ciment — Échantillonnage et contrôle,1977-08-01,1,['91.100.40'],ISO/TC 77,9599,[5865],[4380],"['en','fr']",12,

9514,IS,,ISO 3900:1976,Rubber — Nitrile latex — Determination of bound acrylonitrile content,Caoutchouc — Latex de nitrile — Détermination de la teneur en acrylonitrile lié,1976-09-01,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[21884],"['en','fr']",2,

21884,IS,,ISO 3900:1995,Rubber — Nitrile latex — Determination of bound acrylonitrile content,Caoutchouc — Latex de nitrile — Détermination de la teneur en acrylonitrile lié,1995-12-27,2,['83.040.10'],ISO/TC 45/SC 3,9599,[9514],"[83149,70284]","['en','fr']",2,<p>Specifies a method for the determination of the bound acrylonitrile content of emulsion-polymerized NBR latices. Does also apply to carboxylic-nitrile-butadiene (XNBR) latices and nitrile-isoprene (NIR) latices. Replaces the first edition.</p>

9515,IS,,ISO 3901:1986,Documentation — International Standard Recording Code (ISRC),Documentation — Code international normalisé des enregistrements (ISRC),1986-11-06,1,['01.140.20'],ISO/TC 46/SC 9,9599,,[23401],"['en','fr']",4,"<p>Is intended to define and promote the use of a standard code (ISRC) for the unique identification of recordings or parts of a recording. Guidelines for the use of the ISRC are given in the annex. The ISRC has been prepared to provide a means of identifying audio, video or audio-video recordings internationally. It is not to be used for the numbering of audio, vidio or audio-video carriers.</p>"

23401,IS,,ISO 3901:2001,Information and documentation — International Standard Recording Code (ISRC),Information et documentation — Code international normalisé des enregistrements (ISRC),2001-09-27,2,['01.140.20'],ISO/TC 46/SC 9,9599,[9515],"[59860,51539,64817]","['en','fr']",9,

9516,IS,,ISO 3902:1976,Shipbuilding — Gaskets for ships' side scuttles and rectangular windows,Construction navale — Joints pour hublots et fenêtres rectangulaires de navires,1976-09-01,1,['47.020.10'],ISO/TC 8/SC 8,9599,,[9517],"['en','fr']",1,

9518,IS,,ISO 3903:1977,Shipbuilding — Ships' ordinary rectangular windows,Construction navale — Fenêtres rectangulaires de type courant pour navires,1977-08-01,1,['47.020.10'],ISO/TC 8/SC 8,9599,,[9519],"['en','fr']",15,

9519,IS,,ISO 3903:1993,Shipbuilding and marine structures — Ships' ordinary rectangular windows,Construction navale et structures maritimes — Fenêtres rectangulaires de type courant pour navires,1993-02-18,2,['47.020.10'],ISO/TC 8/SC 8,9599,[9518],[54518],"['en','fr']",19,"<p>Specifies the classification (series, types and models) and gives the dimensions for interchangeability and construction, materials, tests, marking and designation of the windows.</p>"

9520,IS,,ISO 3904:1976,Shipbuilding — Clear view screens,Construction navale — Hublots tournants,1976-11-01,1,['47.020.10'],ISO/TC 8/SC 8,9599,,[9521],"['en','fr']",4,

9522,IS,,ISO 3905:1980,Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts),Peintures et vernis — Détermination du rapport de contraste (pouvoir masquant) des peintures claires à un rendement surfacique déterminé (en utilisant des cartes à contraste de noir et de blanc),1980-06-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[1985],"['en','fr']",3,

9523,IS,Amd,ISO 3905:1980/Amd 1:1981,Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts) — Amendment 1,Peintures et vernis — Détermination du rapport de contraste (pouvoir masquant) des peintures claires à un rendement surfacique déterminé (en utilisant des cartes à contraste de noir et de blanc) — Amendement 1,1981-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[1985],"['en','fr']",1,

9524,IS,,ISO 3906:1980,Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film),Peintures et vernis — Détermination du rapport de contraste (pouvoir masquant) des peintures claires à un rendement surfacique déterminé (en utilisant une feuille de polyester),1980-07-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[1985],"['en','fr']",3,

9525,IS,Amd,ISO 3906:1980/Amd 1:1981,Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film) — Amendment 1,Peintures et vernis — Détermination du rapport de contraste (pouvoir masquant) des peintures claires à un rendement surfacique déterminé (en utilisant une feuille de polyester) — Amendement 1,1981-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[1985],"['en','fr']",1,

9526,IS,,ISO 3907:1977,Hardmetals — Determination of total carbon — Gravimetric method,Métaux-durs — Détermination du carbone total — Méthode gravimétrique,1977-01-01,1,['77.160'],ISO/TC 119,9599,,[9527],"['en','fr']",3,

9527,IS,,ISO 3907:1985,Hardmetals — Determination of total carbon content — Gravimetric method,Métaux-durs — Dosage du carbone total — Méthode gravimétrique,1985-01-24,2,['77.160'],ISO/TC 119/SC 4,9599,[9526],"[28563,43509]","['en','fr']",3,"<p>This second edition cancels and replaces the first edition (i.e. ISO 3908:1976). The method is applicable to some carbides, mixtures of these carbides and binder, all grades of presintered or sintered hardmetals, produced from these carbides, having an insoluble carbon content between 0,02 and 0,5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.</p>"

9528,IS,,ISO 3908:1976,Hardmetals — Determination of insoluble (free) carbon — Gravimetric method,Métaux durs — Détermination du carbone insoluble (libre) — Méthode gravimétrique,1976-09-01,1,['77.160'],ISO/TC 119,9599,,[9529],"['en','fr']",2,

9529,IS,,ISO 3908:1985,Hardmetals — Determination of insoluble (free) carbon content — Gravimetric method,Métaux-durs — Dosage du carbone insoluble (libre) — Méthode gravimétrique,1985-02-14,2,['77.160'],ISO/TC 119/SC 4,9599,[9528],"[43510,28564]","['en','fr']",2,

9531,IS,,ISO 3910:1983,"Rubber boots, unlined moulded",Bottes en caoutchouc moulées non doublées,1983-05-01,2,['61.060'],ISO/TC 94/SC 3,9599,,[2270],"['en','fr']",4,"<p>Lays down the requirements for general purpose products, manufactured in one piece. Two figures show the details of the boot and the test piece, respectively. 4 tables give the minimum thicknesses, tensile strength and elongation at break before and after ageing and the flexing test limits. The method of testing resistance to flexing is described in an annex. - Replaces the first edition (ISO 3910-1976).</p>"

9532,IS,,ISO 3911:1977,"Wheels/rims — Nomenclature, designation, marking, and units of measurement","Roues/jantes — Nomenclature, désignation, marquage et unités de mesure",1977-03-01,1,['43.040.50'],ISO/TC 22,9599,,[9533],"['en','fr']",12,

9533,IS,,ISO 3911:1998,"Wheels and rims for pneumatic tyres — Vocabulary, designation and marking","Roues et jantes pour pneumatiques — Vocabulaire, désignation et marquage",1998-12-20,2,"['43.040.50','01.040.43']",ISO/TC 22,9599,[9532],[36320],"['en','fr']",29,

36320,IS,,ISO 3911:2004,"Wheels and rims for pneumatic tyres — Vocabulary, designation and marking","Roues et jantes pour pneumatiques — Vocabulaire, désignation et marquage",2004-11-23,3,"['43.040.50','01.040.43']",ISO/TC 22/SC 33,9599,[9533],[72662],"['en','fr']",36,"<p>ISO 3911:2004 presents a vocabulary of terms related to, and systems for the designation and marking of, wheels and rims intended for use with pneumatic tyres.</p>"

9535,IS,,ISO 3913:1977,Shipbuilding — Welded steel bollards,Construction navale — Bittes soudées,1977-05-01,1,['47.060'],ISO/TC 8/SC 4,9599,,[9536],"['en','fr']",5,"<p>Lays down the material and principal dimensions for a range of nominal sizes 100 to 800 and states the maximum loading for which the bollards are intended. Construction and details of welding are not specified, but each manufacturer shall ensure that the bollards are capable of withstanding the test requirements specified.</p>"

9539,IS,,ISO 3914-1:1982,Textile machinery and accessories — Cylindrical tubes — Part 1: Recommended values of inner diameters and lengths,Matériel pour l'industrie textile — Tubes cylindriques — Partie 1: Valeurs recommandées des diamètres intérieurs et des longueurs,1982-11-01,1,['59.120.20'],ISO/TC 72/SC 1,9599,"[9538,6893]",[21956],"['en','fr']",2,

9538,IS,,ISO 3914:1976,Withdrawal of ISO 3914-1976,Annulation de l'ISO 3914-1976,1976-08-01,1,['59.120.20'],ISO/TC 72,9599,,[9539],['en'],1,

9541,IS,,ISO 3914-2:1981,Textile machinery — Cylindrical tubes — Part 2: Tubes for open-end spinning machines,Matériel pour l'industrie textile — Tubes cylindriques — Partie 2: Tubes pour machines de filature à fibres libérées,1981-09-01,1,['59.120.20'],ISO/TC 72,9599,,[21957],"['en','fr']",1,

9542,IS,,ISO 3914-3:1984,Textile machinery and accessories — Cylindrical tubes — Part 3: Tubes for tape yarns,Matériel pour l'industrie textile — Tubes cylindriques — Partie 3: Tubes pour lames textiles,1984-09-01,1,['59.120.20'],ISO/TC 72,9599,[6846],[21958],"['en','fr']",2,

9543,IS,,ISO 3914-4:1989,Textile machinery and accessories — Cylindrical tubes — Part 4: Tubes for textured yarns,Matériel pour l'industrie textile — Tubes cylindriques — Partie 4: Tubes pour fils texturés (stretch),1989-12-14,1,['59.120.20'],ISO/TC 72,9599,,[21959],"['en','fr']",2,

9547,IS,,ISO 3915:1981,Plastics — Measurement of resistivity of conductive plastics,Plastiques — Mesurage de la résistivité des plastiques conducteurs,1981-11-01,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[81838],"['en','fr']",4,"<p>Specifies the requirements for the laboratory testing of the resistivity of specially prepared specimens of plastics made conductive by the incorporation of carbon black. The test is suitable for materials having a resistivity of less than 104 Ohm x m. A stable d.c. current is passed between electrodes at the ends of a test piece. A schematic diagram of the test circuit is given. The voltage drop between the two potential electrodes, set on the test piece while the cur

9549,IS,,ISO 3917:1976,"Road vehicles — Safety glasses — Test methods for resistance to radiation, high temperature, humidity and fire","Véhicules routiers — Vitres de sécurité — Méthodes d'essai de résistance au rayonnement, à haute température, à l'humidité et à la combustion",1976-11-01,1,"['81.040.30','43.040.65']",ISO/TC 22,9599,,[9550],"['en','fr']",2,

9550,IS,,ISO 3917:1992,"Road vehicles — Safety glazing materials — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering","Véhicules routiers — Vitrages de sécurité — Méthodes d'essai de résistance au rayonnement, aux températures élevées, à l'humidité, au feu et aux intempéries simulées",1992-11-12,2,"['43.040.60','81.040.30']",ISO/TC 22,9599,[9549],[25410],"['en','fr']",6,

25410,IS,,ISO 3917:1999,"Road vehicles — Safety glazing materials — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering","Véhicules routiers — Vitrages de sécurité — Méthodes d'essai de résistance au rayonnement, aux températures élevées, à l'humidité, au feu et aux conditions climatiques simulées",1999-07-29,3,"['81.040.30','43.040.65']",ISO/TC 22/SC 35,9599,[9550],[57636],"['en','fr']",7,

9552,IS,,ISO 3918:1996,Milking machine installations — Vocabulary,Installations de traite mécanique — Vocabulaire,1996-12-19,2,"['01.040.65','65.040.10']",ISO/TC 23,9599,,[37189],"['en','fr']",26,"<p>Defines terms used in the design, manufacture and use of milking machines for cows, water buffaloes, sheep, goats or other mammals used for milk production. Replaces the first edition.</p>"

9553,IS,,ISO 3919:1977,Coated abrasives — Flap wheels with shafts — Designation and dimensions,Abrasifs appliqués — Roues à lamelles sur tiges — Désignation et dimensions,1977-05-01,1,['25.100.70'],ISO/TC 29,9599,,[9554],"['en','fr']",1,

9554,IS,,ISO 3919:1986,Coated abrasives — Flap wheels with shafts — Designation and dimensions,Abrasifs appliqués — Roues à lamelles sur tiges — Désignation et dimensions,1986-10-02,2,['25.100.70'],ISO/TC 29/SC 5,9599,[9553],[20748],"['en','fr']",1,

20748,IS,,ISO 3919:1993,Coated abrasives — Flap wheels with shafts — Dimensions and designation,Abrasifs appliqués — Roues à lamelles sur tiges — Dimensions et désignation,1993-07-22,3,['25.100.70'],ISO/TC 29/SC 5,9599,[9554],[36551],"['en','fr']",2,"<p>Specifies the dimensions (diameter, width, shaft diameter, free length of shaft), in millimetres, of flap wheels with shafts and their designation.</p>"

9555,IS,,ISO 3920:1976,Honing stones of square section — Designation and dimensions,Bâtons rodoirs à section carrée — Désignation et dimensions,1976-11-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,,"[2724,4713,4707,21897,4714,21898,4709,21899,4710,20536,2736,21900,4711,21632,4712,2715]","['en','fr']",1,

9556,IS,,ISO 3921:1976,Honing stones of rectangular section — Designation and dimensions,Bâtons rodoirs à section rectangulaire — Désignation et dimensions,1976-11-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,,"[2724,4713,4707,21897,4714,21898,4709,21899,4710,20536,2736,21900,4711,21632,4712,2715]","['en','fr']",1,

9558,IS,,ISO 3923-1:1979,Metallic powders — Determination of apparent density — Part 1: Funnel method,Poudres métalliques — Détermination de la masse volumique apparente — Partie 1: Méthode de l'entonnoir,1979-11-01,2,['77.160'],ISO/TC 119/SC 2,9599,,"[29858,41716]","['en','fr']",3,"<p>This second edition cancels and replaces the first edition (i. e. ISO 3923:1977). The method is intended for metallic powders that flow freely through a 2,5 mm diameter orifice. It may, however, be used for powders that flow with difficulty through a 2,5 mm diameter orifice but flow freely through a 5 mm diameter orifice. Methods for powders that will not flow through a 5 mm diameter orifice are specified in p

41716,IS,,ISO 3923-1:2008,Metallic powders — Determination of apparent density — Part 1: Funnel method,Poudres métalliques — Détermination de la masse volumique apparente — Partie 1: Méthode de l'entonnoir,2008-04-24,3,['77.160'],ISO/TC 119/SC 2,9599,[9558],[69219],"['en','fr','ru']",5,"<p>ISO 3923-1:2008 specifies the funnel method for the determination of the apparent density of metallic powders under standardized conditions.</p><p>The method is intended for metallic powders that flow freely through a 2,5 mm diameter orifice. It may, however, be used for powders that flow with difficulty through a 2,5 mm diameter orifice but flow through a 5 mm diameter orifice.</p><p>Methods for the deter

9560,IS,,ISO 3923-3:1980,Metallic powders — Determination of apparent density — Part 3: Oscillating funnel method,Poudres métalliques — Détermination de la masse volumique apparente — Partie 3: Méthode de l'entonnoir oscillant,1980-11-01,1,['77.160'],ISO/TC 119,9599,,[9561],"['en','fr']",3,

9562,IS,,ISO 3924:1977,Petroleum products — Determination of boiling range distribution — Gas chromatography method,Produits pétroliers — Détermination de la répartition dans l'intervalle de distillation — Méthode par chromatographie en phase gazeuse,1977-08-01,1,['75.080'],ISO/TC 28,9599,,[21735],"['en','fr']",9,

21735,IS,,ISO 3924:1999,Petroleum products — Determination of boiling range distribution — Gas chromatography method,Produits pétroliers — Détermination de la répartition dans l'intervalle de distillation — Méthode par chromatographie en phase gazeuse,1999-08-19,2,['75.080'],ISO/TC 28,9599,[9562],[44004],"['en','fr']",17,

44004,IS,,ISO 3924:2010,Petroleum products — Determination of boiling range distribution — Gas chromatography method,Produits pétroliers — Détermination de la répartition dans l'intervalle de distillation — Méthode par chromatographie en phase gazeuse,2010-02-09,3,['75.080'],ISO/TC 28,9599,[21735],[66119],"['en','fr']",24,<p>ISO 3924:2010 specifies a method for the determination of the boiling-range distribution of petroleum products. The method is applicable to petroleum products and fractions with a final boiling point of 538 °C or lower at atmospheric pressure as determined by this International Standard. ISO 3924:2010 is not applicable to gasoline samples or gasoline components. The meth

66119,IS,,ISO 3924:2016,Petroleum products — Determination of boiling range distribution — Gas chromatography method,Produits pétroliers — Détermination de la répartition dans l'intervalle de distillation — Méthode par chromatographie en phase gazeuse,2016-09-14,4,['75.080'],ISO/TC 28,9599,[44004],[72611],"['en','fr']",25,<p>ISO 3924:2016 specifies a method for the determination of the boiling range distribution of petroleum products. The method is applicable to petroleum products and fractions with a final boiling point of 538 °C or lower at atmospheric pressure as determined by this International Standard. This International Standard is not applicable to gasoline samples or gasoline compon

9563,IS,,ISO 3925:1978,Unsealed radioactive substances — Identification and certification,Substances radioactives non scellées — Identification et certification,1978-05-01,1,['13.280'],ISO/TC 85/SC 2,9599,,[60058],"['en','fr']",1,

9565,IS,,ISO 3927:1977,"Metallic powders, excluding powders for hardmetals — Determination of compactibility (compressibility) in uniaxial compression","Poudres métalliques, à l'exclusion des poudres pour métaux-durs — Détermination de la compressibilité sous compression uniaxiale",1977-01-01,1,['77.160'],ISO/TC 119,9599,,[9566],"['en','fr']",4,

9566,IS,,ISO 3927:1985,"Metallic powders, excluding powders for hardmetals — Determination of compactibility (Compressibility) in uniaxial compression","Poudres métalliques, à l'exclusion des poudres pour métaux-durs — Détermination de la compressibilité sous compression uniaxiale",1985-06-27,2,['77.160'],ISO/TC 119/SC 2,9599,[9565],[28047],"['en','fr']",4,<p>This second edition cancels and replaces the first edition (i. e. ISO 3927:1977). Specifies methods to measure the extent to which a metallic powder is compacted when subjected to uniaxial compressive loading in a confining die under specified conditions. The method is not applicable to powders for hardmetals.</p>

28047,IS,,ISO 3927:2001,"Metallic powders, excluding powders for hardmetals — Determination of compressibility in uniaxial compression","Poudres métalliques, à l'exclusion des poudres pour métaux-durs — Détermination de la compressibilité sous compression uniaxiale",2001-12-13,3,['77.160'],ISO/TC 119/SC 2,9599,[9566],[56153],"['en','fr']",7,

52911,IS,Cor,ISO 3927:2001/Cor 1:2008,"Metallic powders, excluding powders for hardmetals — Determination of compressibility in uniaxial compression — Technical Corrigendum 1","Poudres métalliques, à l'exclusion des poudres pour métaux-durs — Détermination de la compressibilité sous compression uniaxiale — Rectificatif technique 1",2008-12-10,3,['77.160'],ISO/TC 119/SC 2,9599,,[56153],"['en','fr']",2,

56153,IS,,ISO 3927:2011,"Metallic powders, excluding powders for hardmetals — Determination of compressibility in uniaxial compression","Poudres métalliques, à l'exclusion des poudres pour métaux-durs — Détermination de la compressibilité sous compression uniaxiale",2011-01-20,4,['77.160'],ISO/TC 119/SC 2,9599,"[28047,52911]",[72858],"['en','fr']",8,<p>ISO 3927:2011 specifies methods for measuring the extent to which a metallic powder is compacted when subjected to uniaxial compressive loading in a confining die under specified conditions.</p><p>The method is not applicable to powders for hardmetals.</p>

9567,IS,,ISO 3928:1977,"Sintered metal materials, excluding hardmetals — Fatigue test pieces","Matériaux en métal fritté, à l'exclusion des métaux-durs — Éprouvettes pour essais de fatigue",1977-01-01,1,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,,[9568],"['en','fr']",3,

9568,IS,,ISO 3928:1999,"Sintered metal materials, excluding hardmetals — Fatigue test pieces","Matériaux métalliques frittés, à l'exclusion des métaux-durs — Éprouvettes pour essais de fatigue",1999-11-04,2,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,[9567],"[65279,45331]","['en','fr']",7,

9569,IS,,ISO 3929:1976,Road vehicles — Determination of exhaust carbon monoxide concentration at idle speed,Véhicules routiers — Détermination du monoxyde de carbone émis par un moteur tournant au régime de ralenti,1976-06-01,1,"['13.040.50','43.060']",ISO/TC 22,9599,,[9570],"['en','fr']",2,

9570,IS,,ISO 3929:1995,Road vehicles — Measurement methods for exhaust gas emissions produced during inspection or maintenance,Véhicules routiers — Méthodes de mesure des émissions gazeuses au cours des inspections ou de la maintenance,1995-02-02,2,"['13.040.50','43.060.20']",ISO/TC 22,9599,[9569],[36351],"['en','fr']",6,"<p>Establishes the test procedures for direct measurement of the concentration of exhaust gas emissions from road vehicles with a maximum authorized total mass not exceeding 3,5 t, equipped with controlled ignition engines, excluding those which are supplied with fuel/oil mixture. Defines the recommended test procedure for periodic inspections in official garages, official

9571,IS,,ISO 3930:1976,Road vehicles — Carbon monoxide analyser equipment — Technical specifications,Véhicules routiers — Équipement d'analyseur de monoxyde de carbone — Spécifications techniques,1976-05-01,1,"['13.040.50','43.180']",ISO/TC 22,9599,,[9572],"['en','fr']",2,

9572,IS,,ISO 3930:1993,Road vehicles — Measurement equipment for exhaust gas emissions during inspection or maintenance — Technical specifications,Véhicules routiers — Équipement de mesure des émissions gazeuses au cours des inspections ou des contrôles d'entretien — Spécifications techniques,1993-10-21,2,"['13.040.50','43.180']",ISO/TC 22,9599,[9571],[30772],"['en','fr']",16,

30772,IS,,ISO 3930:2000,Instruments for measuring vehicle exhaust emissions,Instruments de mesure des gaz d'échappement des véhicules,2000-09-21,3,"['13.040.50','43.180']",ISO/TC 22,9599,[9572],"[51553,51554]","['en','fr']",27,

37557,IS,Amd,ISO 3930:2000/Amd 1:2004,Instruments for measuring vehicle exhaust emissions — Amendment 1,Instruments de mesure des gaz d'échappement des véhicules — Amendement 1,2004-10-06,3,"['13.040.50','43.180']",ISO/TC 22,9599,,"[51553,51554]","['en','fr']",1,

9574,IS,,ISO 3932:1976,Textiles — Woven fabrics — Measurement of width of pieces,Textiles — Tissus — Mesurage de la largeur des pièces,1976-10-01,1,['59.080.30'],ISO/TC 38/SC 24,9599,,[40768],"['en','fr']",4,<p>Two methods are specified for the determination of the width of pieces (of any length) of woven fabrics that are in the state of relaxation obtained by exposure (free from applied tension) to the standard atmosphere for testing textiles. The methods are applicable to woven fabrics (including those of 'stretch' type) with a minimal width of 10 cm made up full width or folded down the middle.</p>

9575,IS,,ISO 3933:1976,Textiles — Woven fabrics — Measurement of length of pieces,Textiles — Tissus — Mesurage de la longueur des pièces,1976-10-01,1,['59.080.30'],ISO/TC 38/SC 24,9599,,[40768],"['en','fr']",3,<p>Two methods are specified for the determination of the length of pieces (of any length) of woven fabrics that are in the state of relaxation obtained by exposure (free from applied tension) to the standard atmosphere for testing textiles. The methods are applicable to woven fabrics (including 'stretch' fabrics) made up full width or folded down the middle.</p>

9576,IS,,ISO 3934:1978,Rubber building gaskets — Materials in preformed solid vulcanizates used for sealing glazing and panels — Specification,Joints de bâtiments en caoutchouc vulcanisé — Matériaux pour joints compacts préformés utilisés pour les vitrages et les panneaux — Spécifications,1978-09-01,1,"['83.140.50','91.100.50']",ISO/TC 45/SC 4,9599,,[35614],"['en','fr']",2,"<p>Describes four types of material, where both resistance to creep under load and weather resistance are essential. Defines requirements for gaskets used in buildings (such as U-channel gaskets). Does not cover structural gaskets of the locking compression type. A table summarizes the general requirements.</p>"

35614,IS,,ISO 3934:2002,"Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods","Caoutchouc vulcanisé et thermoplastique — Profilés d'étanchéité utilisés dans le bâtiment — Classification, spécifications et méthodes d'essai",2002-09-05,2,"['83.140.50','91.100.50']",ISO/TC 45/SC 4,9599,[9576],[77549],"['en','fr']",19,"<p>This International Standard specifies a system of classification of materials used in preformed gaskets for buildings. It applies to the following products:</p><ol><li>gaskets for use round the inside of door or window casings, i.e. weatherstripping (dynamic gaskets);</li><li>gaskets for glazing (static ga

9579,IS,,ISO 3936:1977,Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions,Douilles de réduction à entraînement par tenons aux cônes extérieur et intérieur 7/24 — Dimensions,1977-10-01,2,['25.060.20'],ISO/TC 29,9599,,[9580],"['en','fr']",1,

9581,IS,,ISO 3937:1977,Cutter arbors with tenon drive — Dimensions,Mandrins porte-fraise à entraînement par tenons — Dimensions,1977-10-01,2,['25.060.20'],ISO/TC 29,9599,,[9582],"['en','fr']",3,

9582,IS,,ISO 3937:1985,Cutter arbors with tenon drive — Dimensions,Mandrins porte-fraise à entraînement par tenons — Dimensions,1985-03-21,3,['25.060.20'],ISO/TC 29,9599,[9581],"[36971,43461,43462]","['en','fr']",3,

9586,IS,,ISO 3941:1977,Classification of fires,Classes de feux,1977-10-01,1,['13.220.01'],ISO/TC 21/SC 2,9599,,[38025],"['en','fr']",1,<p>Classifies in four categories the different kinds which can be defined in terms of the nature of the fuel. These classes are useful in the context of fire-fighting by means of an extinguisher.</p>

38025,IS,,ISO 3941:2007,Classification of fires,Classes de feux,2007-09-10,2,['13.220.01'],ISO/TC 21/SC 2,9599,[9586],[88174],"['en','ru']",1,"<p>ISO 3941:2007 classifies, into five categories, the different kinds of fires defined in terms of the nature of the fuel. Such a classification is particularly useful in the context of fire-fighting by means of an extinguisher.</p>"

9587,IS,,ISO 3942:1976,"Photographic grade sodium carbonate, monohydrate — Specification",Carbonate de sodium hydraté de qualité photographique — Spécifications,1976-09-01,1,['37.040.30'],ISO/TC 42,9599,,[4434],"['en','fr']",5,

9588,IS,,ISO 3943:1976,"Photographic grade sodium acetate, anhydrous — Specification",Acétate de sodium anhydre de qualité photographique — Spécifications,1976-10-01,1,['37.040.30'],ISO/TC 42,9599,,[9589],"['en','fr']",5,

9590,IS,,ISO 3944:1980,Fertilizers — Determination of bulk density (loose),Engrais — Détermination de la masse volumique sans tassement,1980-11-01,2,['65.080'],ISO/TC 134,9599,,[9591],"['en','fr']",3,

9591,IS,,ISO 3944:1992,Fertilizers — Determination of bulk density (loose),Engrais — Détermination de la masse volumique sans tassement,1992-07-09,3,['65.080'],ISO/TC 134,9599,[9590],[92714],"['en','fr']",3,"<p>The method is applicable to solid, but not powder fertilizers, dry only. It is not suitable for fertilizers which contain a large proportion of particles exceeding 5 mm in diameter. Its principle is pouring the fertilizer from a specified funnel into a specified measuring cylinder of known volume and weighing the contents of the cylinder. If the fertilizer has absorbed moisture during transport or storage, it is necessary to dry it in an environmental chamber.</p>"

9592,IS,,ISO 3945:1977,Mechanical vibration of large rotating machines with speed range from 10 to 200 rev/s — Measurement and evaluation of vibration severity in situ,Vibrations mécaniques des grandes machines tournantes dans la gamme des vitesses comprises entre 10 et 200 tr/s — Mesurage et évaluation de l'intensité vibratoire in situ,1977-03-01,1,['17.160'],ISO/TC 108,9599,,[9593],"['en','fr']",6,

9593,IS,,ISO 3945:1985,Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s — Measurement and evaluation of vibration severity in situ,Vibrations mécaniques des grandes machines tournantes dans la gamme des vitesses comprises entre 10 et 200 tr/s — Mesurage et évaluation de l'intensité vibratoire in situ,1985-11-28,2,['17.160'],ISO/TC 108/SC 2,9599,[9592],[18866],"['en','fr']",6,

9597,IS,,ISO 3949:1980,"Plastics hoses and hose assemblies — Thermoplastics, textile-reinforced, hydraulic type",Tuyaux et assemblages de tuyaux en plastique — Type hydraulique en thermoplastique à renforcement en fibre textile,1980-03-01,1,"['23.100.40','83.140.40']",ISO/TC 45,9599,,[9598],"['en','fr']",7,

9598,IS,,ISO 3949:1991,"Plastics hoses and hose assemblies — Thermoplastics, textile-reinforced, hydraulic type — Specification",Tuyaux et flexibles en plastique — Type hydraulique en thermoplastiques à armature textile — Spécifications,1991-11-07,2,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[9597],"[28771,40350]","['en','fr']",4,"<p>Specifies requirements for hoses suitable for use with petroleum, water and synthetic-based hydraulic fluids within a temperature range of -40°C to +100°C. This second edition cancels and replaces the first edition (1980). Annex A forms an integral part of this standard.</p>"

40350,IS,,ISO 3949:2004,Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification,Tuyaux et flexibles en plastique — Types hydrauliques avec armature textile — Spécifications,2004-12-01,3,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[9598],[50796],['en'],11,"<p>ISO 3949:2004 specifies requirements for two types of textile-reinforced thermoplastics hoses and hose assemblies of nominal bore from 5 to 25. Each type is divided into two classes dependent on electrical-conductivity requirements. They are suitable for use with:</p><ul><li>hydraulic fluids HH, HL, HM, HR and HV at temperatures ranging from -40 °C to +100 °C;</li><li>water-based hydra

50796,IS,,ISO 3949:2009,Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification,Tuyaux et flexibles en plastique — Types hydrauliques avec armature textile — Spécifications,2009-08-19,4,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[40350],[68050],"['en','fr','ru']",13,"<p>ISO 3949:2009 specifies requirements for three types of textile-reinforced thermoplastics hose and hose assembly of nominal size from 3,2 to 25. Each type is divided into two classes dependent on electrical conductivity requirements. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatures ranging from 0 °

68050,IS,,ISO 3949:2018,Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification,Tuyaux et flexibles en plastique — Types hydrauliques avec armature textile — Spécifications,2018-06-07,5,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[50796],[77514],"['en','fr']",12,"<p>This document specifies requirements for three types of textile-reinforced thermoplastics hose and hose assembly of nominal size from 3,2 to 25. Each type is divided into two classes dependent on electrical conductivity requirements.</p><p>They are suitable for use with:</p><p>— oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures r

9599,IS,,ISO 3950:1977,Tooth designation for dental purposes — Two-digit system,Désignation des dents en art dentaire — Code à deux chiffres,1977-03-01,1,['11.060.01'],ISO/TC 106,9599,,[9600],"['en','fr']",2,

9600,IS,,ISO 3950:1984,Dentistry — Designation system for teeth and areas of the oral cavity,Art dentaire — Code de désignation des dents et des régions de la cavité buccale,1984-09-01,2,['11.060.01'],ISO/TC 106/SC 3,9599,[9599],[41835],"['en','fr']",2,<p>Provides a system for designating teeth or areas of the oral cavity using two digits. It also provides a system for designating surfaces of the teeth using letters of the alphabet. The system described has been drawn up by the International Dental Federation (FDI) and approved by the World Health Organization (WHO).</p>

41835,IS,,ISO 3950:2009,Dentistry — Designation system for teeth and areas of the oral cavity,Art dentaire — Code de désignation des dents et des régions de la cavité buccale,2009-05-05,3,['11.060.01'],ISO/TC 106/SC 3,9599,[9600],[68292],"['en','fr']",4,<p>ISO 3950:2009 provides a system for designating teeth or areas of the oral cavity using two digits.</p>

34640,IS,,ISO 3951-1:2005,Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL,Règles d'échantillonnage pour les contrôles par mesures — Partie 1: Spécifications pour les plans d'échantillonnage simples indexés d'après la limite d'acceptation de qualité (LAQ) pour le contrôle lot par lot pour une caractéristique de qualité unique et une LAQ unique,2005-04-07,1,['03.120.30'],ISO/TC 69/SC 5,9599,[9602],[57490],['en'],103,"<p>ISO 3951-1:2005 specifies an acceptance sampling system of single sampling plans for inspection by variable

57490,IS,,ISO 3951-1:2013,Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL,Règles d'échantillonnage pour les contrôles par mesures — Partie 1: Spécification pour les plans d'échantillonnage simples indexés d'après une limite de qualité acceptable (LQA) pour un contrôle lot par lot pour une caractéristique-qualité unique et une LQA unique,2013-08-27,2,['03.120.30'],ISO/TC 69/SC 5,9599,[34640],[74706],"['en','fr']",92,"<p>ISO 3951-1:2013 specifies an acceptance sampling system of single sampling plans for inspection by variabl

9601,IS,,ISO 3951:1981,Sampling procedures and charts for inspection by variables for percent defective,Règles et tables d'échantillonnage pour les contrôles par mesures des pourcentages de défectueux,1981-08-01,1,['03.120.30'],ISO/TC 69,9599,,[9602],"['en','fr']",105,