Withdrawn and superseded ISO standards — page 110 of 246

9406,IS,,ISO 3844:1977,Shoe sizes — Method of marking,Pointures des chaussures — Mode de marquage,1977-08-01,1,['61.060'],ISO/TC 137,9599,,[17106],"['en','fr']",1,

9407,IS,,ISO 3846:1977,Liquid flow measurement in open channels by weirs and flumes — Free overfall weirs of finite crest width (rectangular broad-crested weirs),Mesure de débits des liquides dans les canaux découverts au moyen de déversoirs et de canaux jaugeurs — Déversoirs à largeur de crête finie et à déversement dénoyé (déversoirs rectangulaires à seuil épais),1977-07-01,1,['17.120.20'],ISO/TC 113,9599,,[9408],"['en','fr']",9,

9408,IS,,ISO 3846:1989,Liquid flow measurement in open channels by weirs and flumes — Rectangular broad-crested weirs,Mesure de débit des liquides dans les canaux découverts au moyen de déversoirs et de canaux-jaugeurs — Déversoirs rectangulaires à seuil épais,1989-11-09,2,['17.120.20'],ISO/TC 113/SC 2,9599,[9407],[38065],"['en','fr']",12,"<p>Specifies the requirements for the use of the given appliances for the measurement of flow of clear water in open channels under free flow conditions. Cancels and replaces the first edition (ISO 3846 : 1977), of which it constitutes a technical revision.</p>"

9409,IS,,ISO 3847:1977,Liquid flow measurement in open channels by weirs and flumes — End-depth method for estimation of flow in rectangular channels with a free overfall,Mesure de débit des liquides dans les canaux découverts au moyen de déversoirs et de canaux jaugeurs — Méthode d'évaluation du débit par détermination de la profondeur en bout des chenaux rectangulaires à déversement dénoyé,1977-06-01,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[62561],"['en','fr']",7,"<p>Specifies a method for the estimation of sub-critical flow of clear water in smooth, straight, rectangular prismatic open channels with a vertical drop and discharging freely. Using the measured depth at the end, the flow in rec

9410,IS,,ISO 3848:1976,Oil of Java citronella,Huile essentielle de citronnelle type Java,1976-09-01,1,['71.100.60'],ISO/TC 54,9599,,"[9411,32027]","['en','fr']",2,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear, mobile liquid. Colour: Pale yellow to pale brownish yellow. Odour: Characteristic, recalling that of citronellal. Relative density at 20/20 °C: 0,880 - 0,895. Refractive index at 20 °C: 1,4660 - 1,4730. Optical rotation at 20 °C: Range from - 5 to 0 . Solubility in 80 % (V/V) ethanol at 20 °C: 1 volume in 2 volumes. Ester value after acetylation: Minimum 250. Carbonyl value: Minimum 127.</p>"

32027,IS,,ISO 3848:2001,"Oil of citronella, Java type","Huile essentielle de citronnelle, type Java",2001-09-20,2,['71.100.60'],ISO/TC 54,9599,[9410],[65251],"['en','fr']",7,

37582,IS,Cor,ISO 3848:2001/Cor 1:2002,"Oil of citronella, Java type — Technical Corrigendum 1","Huile essentielle de citronnelle, type Java — Rectificatif technique 1",2002-11-11,2,['71.100.60'],ISO/TC 54,9599,,[65251],"['en','fr']",1,

9412,IS,,ISO 3849:1981,Oil of Ceylon citronella,Huile essentielle de citronnelle type Ceylan,1981-02-01,1,['71.100.60'],ISO/TC 54,9599,,"[9413,32034]","['en','fr']",2,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear, mobile liquid. Colour: Pale yellow to pale brownish yellow. Odour: Characteristic of oil of Ceylon citronella. Relative density at 20/20 °C: 0,894 - 0,910. Refractive index at 20 °C: 1,4790 - 1,4870. Optical rotation at 20 °C: Range from - 22 to - 12 . Miscibility with 80 % (V/V) ethanol at 20 °C: 1 : 2. Ester value after acetylation: 157 - 200. Carbonyl value: 18 - 55.</p>"

4367,IS,,ISO 385-1:1984,Laboratory glassware — Burettes — Part 1: General requirements,Verrerie de laboratoire — Burettes — Partie 1: Spécifications générales,1984-10-01,1,['17.060'],ISO/TC 48,9599,[4366],[38678],"['en','fr']",8,"<p>Type I burettes (no waiting time) class A and B and type II burettes (with waiting time) class A are considered at reference time, volumetric accuracy, limits of volumetric error an relation to capacity and to diameter at the meniscus.</p>"

4368,IS,,ISO 385-2:1984,Laboratory glassware — Burettes — Part 2: Burettes for which no waiting time is specified,Verrerie de laboratoire — Burettes — Partie 2: Burettes sans temps d'attente,1984-10-01,1,['17.060'],ISO/TC 48,9599,[4366],[38678],"['en','fr']",2,"<p>Requirements related to type I burettes specify capacity, test method, delivery time and method of use. The burettes shall conform to the general requirements of ISO 385/1.</p>"

4369,IS,,ISO 385-3:1984,Laboratory glassware — Burettes — Part 3: Burettes for which a waiting time of 30 s is specified,Verrerie de laboratoire — Burettes — Partie 3: Burettes avec temps d'attente de 30 s,1984-10-01,1,['17.060'],ISO/TC 48,9599,[4366],[38678],"['en','fr']",2,"<p>Capacity, test method, delivery time and waiting time of Type II burettes are specified. The annex deals with handling and method of use of the test. Furthermore, the burettes shall conform to the general requirements of ISO 385/1.</p>"

9414,IS,,ISO 3851:1977,Capsulated dental silicate and silico-phosphate filling materials,"Produits d'obturation dentaire en capsules, à base de silicates et de silicophosphates",1977-07-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[17800],"['en','fr']",11,

9415,IS,,ISO 3852:1977,Iron ores (maximum particle size 40 mm or smaller) — Determination of bulk density,Minerais de fer (particules de dimension granulométrique maximale inférieure ou égale à 40 mm) — Détermination de la masse volumique apparente,1977-01-01,1,['73.060.10'],ISO/TC 102/SC 3,9599,,[9416],"['en','fr']",2,

9416,IS,,ISO 3852:1988,Iron ores — Determination of bulk density,Minerais de fer — Détermination de la masse volumique apparente,1988-11-24,2,['73.060.10'],ISO/TC 102/SC 3,9599,"[9415,11510]",[38080],"['en','fr']",3,"<p>This second edition cancels and replaces the first edition (ISO 3852:1977) and ISO 5464:1980, and includes the determination of bulk density for particles greater than 40 mm. Specifies two methods for measuring the bulk density of natural and processed iron ores.</p>"

9417,IS,,ISO 3853:1977,Road vehicles — Caravans and light trailers — Towing brackets and coupling balls — Strength test,Véhicules routiers — Caravanes et remorques légères — Attelages à boule — Essais de résistance,1977-06-01,1,['43.040.70'],ISO/TC 22,9599,,[9418],"['en','fr']",4,

9421,IS,,ISO 3856-1:1983,Paints and varnishes — Determination of 'soluble' metal content — Part 1: Determination of lead content — Flame atomic absorption spectroscopic method and dithizone spectrometric method,Peintures et vernis — Détermination de la teneur en métaux 'solubles' — Partie 1: Détermination de la teneur en plomb — Méthode par spectroscopie d'absorption atomique dans la flamme et méthode spectrométrique à la dithizone,1983-06-01,2,['87.040'],ISO/TC 256,9599,,[9422],"['en','fr']",6,

9423,IS,,ISO 3856-2:1980,Paints and varnishes — Determination of 'soluble' metal content — Part 2: Determination of antimony content — Flame atomic absorption spectroscopic method and Rhodamine B spectrophotometric method,Peintures et vernis — Détermination de la teneur en métaux 'solubles' — Partie 2: Détermination de la teneur en antimoine — Méthode par spectroscopie d'absorption atomique dans la flamme et méthode spectrophotométrique à la rhodamine B,1980-10-01,1,['87.040'],ISO/TC 256,9599,,[9424],"['en','fr']",6,

9425,IS,,ISO 3856-3:1980,Paints and varnishes — Determination of 'soluble' metal content — Part 3: Determination of barium content — Flame atomic emission spectroscopic method,Peintures et vernis — Détermination de la teneur en métaux 'solubles' — Partie 3: Détermination de la teneur en baryum — Méthode par spectroscopie d'émission atomique dans la flamme,1980-08-01,1,['87.040'],ISO/TC 256,9599,,[9426],"['en','fr']",4,

9427,IS,,ISO 3856-4:1980,Paints and varnishes — Determination of 'soluble' metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectroscopic method and polarographic method,Peintures et vernis — Détermination de la teneur en métaux 'solubles' — Partie 4: Détermination de la teneur en cadmium — Méthode par spectroscopie d'absorption atomique dans la flamme et méthode polarographique,1980-08-01,1,['87.040'],ISO/TC 256,9599,,[9428],"['en','fr']",6,

9429,IS,,ISO 3856-5:1980,Paints and varnishes — Determination of 'soluble' metal content — Part 5: Determination of hexavalent chromium content of the pigment and extender portion of the paint — Diphenylcarbazide spectrophotometric method,Peintures et vernis — Détermination de la teneur en métaux 'solubles' — Partie 5: Détermination du chrome hexavalent contenu dans la partie de pigment et de matière de charge de la peinture — Méthode spectrophotométrique A2 la diphénylcarbazide,1980-08-01,1,['87.040'],ISO/TC 256,9599,,[9430],"['en','fr']",3,

9431,IS,,ISO 3856-6:1980,Paints and varnishes — Determination of 'soluble' metal content — Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectroscopic method,Peintures et vernis — Détermination de la teneur en métaux 'solubles' — Partie 6: Détermination de la teneur totale en chrome de la fraction liquide de la peinture — Méthode par spectroscopie d'absorption atomique dans la flamme,1980-08-01,1,['87.040'],ISO/TC 256,9599,,[9432],"['en','fr']",3,

9438,IS,,ISO 3857-3:1979,"Compressors, pneumatic tools and machines — Vocabulary — Part 3: Pneumatic tools and machines","Compresseurs, outils et machines pneumatiques — Vocabulaire — Partie 3: Outils et machines pneumatiques",1979-09-01,1,"['23.140','25.140.10','01.040.23','01.040.25']",ISO/TC 118/SC 3,9599,,[9439],"['en','fr']",6,

9441,IS,,ISO 3858-1:1983,Rubber compounding ingredients — Carbon black — Determination of light transmittance of toluene extract — Part 1: Rapid method,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la transmittance spectrale de l'extrait toluénique — Partie 1: Méthode rapide,1983-12-01,1,['83.040.20'],ISO/TC 45/SC 3,9599,[9440],[9442],"['en','fr']",2,

9442,IS,,ISO 3858-1:1990,Carbon black for use in the rubber industry — Determination of light transmittance of toluene extract — Part 1: Rapid method,Noir de carbone pour l'industrie du caoutchouc — Détermination de la transmittance spectrale de l'extrait toluénique — Partie 1: Méthode rapide,1990-08-23,2,['83.040.20'],ISO/TC 45/SC 3,9599,[9441],[36691],"['en','fr']",3,<p>The method uses a spectrometer and provides a qualitative indication of the degree of discoloration of toluene by carbon blacks for use in the rubber industry. Part 2 refers to a method for product evaluation. - Replaces the first edition (ISO 3858-1977).</p>

9440,IS,,ISO 3858:1977,Withdrawal of ISO 3858-1977,Annulation de l'ISO 3858-1977,1977-10-01,1,['83.040.20'],ISO/TC 45/SC 3,9599,,"[9443,9441]","['en','fr']",2,

9443,IS,,ISO 3858-2:1983,Rubber compounding ingredients — Carbon black — Determination of light transmittance of toluene extract — Part 2: Method for product evaluation,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la transmittance spectrale de l'extrait toluénique — Partie 2: Méthode d'évaluation du produit,1983-12-01,1,['83.040.20'],ISO/TC 45/SC 3,9599,[9440],[9444],"['en','fr']",3,

9444,IS,,ISO 3858-2:1990,Carbon black for use in the rubber industry — Determination of light transmittance of toluene extract — Part 2: Method for product evaluation,Noir de carbone pour l'industrie du caoutchouc — Détermination de la transmittance spectrale de l'extrait toluénique — Partie 2: Méthode d'évaluation du produit,1990-08-23,2,['83.040.20'],ISO/TC 45/SC 3,9599,[9443],[36691],"['en','fr']",3,"<p>Measures the discoloration caused by the extracted matter, as required in product evaluation. The degree of discoloration is quantitatively measured by means of a spectrometer. The method is applicable to high-extract thermal-type blacks. Part 1 refers to a rapid method. - Replaces the fir

36691,IS,,ISO 3858:2004,Rubber compounding ingredients — Carbon black — Determination of light transmittance of toluene extract,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la transmittance spectrale de l'extrait toluénique,2004-05-27,2,['83.040.20'],ISO/TC 45/SC 3,9599,"[9442,9444]",[51675],"['en','fr']",6,"<p>ISO 3858:2004 specifies a method for the determination of the light transmittance of the toluene extract from carbon black for use in the rubber industry, as a means of measuring the discolouration caused by the extractable matter.</p><p>The light transmittance value provides an estimate of the degree of discolouration caused by the toluene-extractable mat

51675,IS,,ISO 3858:2008,Rubber compounding ingredients — Carbon black — Determination of light transmittance of toluene extract,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la transmittance spectrale de l'extrait toluénique,2008-09-01,3,['83.040.20'],ISO/TC 45/SC 3,9599,[36691],[72850],"['en','fr','ru']",6,"<p>ISO 3858:2008 specifies a method for the determination of the light transmittance of the toluene extract from carbon black for use in the rubber industry, as a means of measuring the discolouration caused by the extractable matter.</p><p>The light transmittance value provides an estimate of the degree of discolouration caused by the toluene-extractable matt

9445,IS,,ISO 3859:1977,Inverse dovetail cutters and dovetail cutters with parallel shanks,"Fraises coniques à cône renversé et à cône direct, à queue cylindrique",1977-03-01,1,['25.100.20'],ISO/TC 29,9599,,[9446],"['en','fr']",2,

9446,IS,,ISO 3859:1985,Inverse dovetail cutters and dovetail cutters with parallel shanks,"Fraises coniques à cône renversé et à cône direct, à queue cylindrique",1985-10-31,2,['25.100.20'],ISO/TC 29,9599,[9445],[33369],"['en','fr']",2,

9447,IS,,ISO 3860:1976,Bore cutters with key drive — Form milling cutters with constant profile,Fraises à alésage lisse à entraînement par clavette — Fraises de forme à profil constant,1976-11-01,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[50898],"['en','fr']",2,

9448,IS,,ISO 3861:1977,Rubber hose for grit blasting,Tuyaux en caoutchouc pour grenaillage,1977-05-01,1,"['83.140','25.220.10']",ISO/TC 45/SC 1,9599,,[9449],"['en','fr']",2,

9449,IS,,ISO 3861:1995,Rubber hoses for sand and grit blasting — Specification,Tuyaux en caoutchouc pour sablage et grenaillage — Spécifications,1995-08-03,2,"['25.220.10','83.140.40']",ISO/TC 45/SC 1,9599,[9448],[37224],"['en','fr']",3,"<p>Specifies the requirements for rubber hoses for wet and dry sand and grit blasting. Cancels and replaces the first edition, which has been technically revised.</p>"

37224,IS,,ISO 3861:2005,Rubber hoses for sand and grit blasting — Specification,Tuyaux en caoutchouc pour sablage et grenaillage — Spécifications,2005-02-25,3,"['25.220.10','83.140.40']",ISO/TC 45/SC 1,9599,[9449],[77509],"['en','fr']",4,"<p>ISO 3861:2005 specifies the requirements for rubber hoses for wet and dry sand and grit blasting, suitable for use up to a maximum working pressure of 6,3 bar and over an operating temperature range of -25 °C to +70 °C.</p>"

28770,IS,,ISO 3862-1:2001,Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types — Specification — Part 1: Oil-based fluid applications,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature hélicoïdale de fils métalliques — Spécifications — Partie 1: Applications pour fluide à base d'huile,2001-08-30,1,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[9451],[45405],['en'],10,

9450,IS,,ISO 3862:1980,"Rubber hoses and hose assemblies — Rubber-covered, spiral wire reinforced, hydraulic type",Tuyaux et flexibles en caoutchouc — Type hydraulique à revêtement de caoutchouc et renforcement hélicoïdal de fil métallique,1980-05-01,1,"['23.100.40','83.140.40']",ISO/TC 45,9599,,[9451],"['en','fr']",9,

9451,IS,,ISO 3862:1991,"Rubber hoses and hose assemblies — Rubber-covered, spiral wire reinforced, hydraulic type — Specification",Tuyaux et flexibles en caoutchouc — Type hydraulique à revêtement de caoutchouc et armature spiralée de fil métallique — Spécifications,1991-11-07,2,['83.140.40'],ISO/TC 45/SC 1,9599,[9450],"[28770,35567]","['en','fr']",6,<p>Specifies requirements for hoses suitable for use with petroleum-based and water-based fluids within a temperature range of -40°C to +100°C for types 1 to 5 and -40°C to +121°C for types 6 and 7. This second edition cancels and replaces the first edition (1980).</p>

35567,IS,,ISO 3862-2:2005,Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types — Specification — Part 2: Water-based fluid applications,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature hélicoïdale de fils métalliques — Spécifications — Partie 2: Applications pour fluide à base d'eau,2005-10-06,1,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[9451],[45405],['en'],12,"<p>ISO 3862-2:2005 specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB at temperatures ranging from -40 °C to +6

45405,IS,,ISO 3862:2009,Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature hélicoïdale de fils métalliques pour fluides à base d'huile ou à base d'eau — Spécifications,2009-04-24,3,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,"[28770,35567]","[70383,68048]","['en','ru']",13,"<p>ISO 3862:2009 specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temp

70383,IS,,ISO 3862:2017,Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature hélicoïdale de fils métalliques pour fluides à base d'huile ou à base d'eau — Spécifications,2017-07-25,4,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[45405],[75649],['en'],13,"<p>ISO 3862:2017 specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51.</p><p>They are suitable for use with:</p><p>- oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperature

9452,IS,,ISO 3863:1980,Cork — Cylindrical stoppers — Dimensional characteristics,Liège — Bouchons cylindriques — Caractéristiques dimensionnelles,1980-10-01,1,"['55.100','79.100']",ISO/TC 87,9599,,[9453],"['en','fr']",1,

9453,IS,,ISO 3863:1989,"Cylindrical cork stoppers — Dimensional characteristics, sampling, packaging and marking","Bouchons cylindriques en liège — Caractéristiques dimensionnelles, échantillonnage, emballage et marquage",1989-06-29,2,"['79.100','55.100']",ISO/TC 87,9599,[9452],[24838],"['en','fr']",1,"<p>For the purpose of this standard, which constitutes the technically revised second edition, the definitions in ISO 2569 apply. Sampling shall be made according to ISO 4707. Designation consists of the words 'cylindrical cork stoppers' followed by the figures which correspond to their length and diameter, in millimetres, separated by a cross.</p>"

23670,IS,,ISO 3864-1:2002,Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs in workplaces and public areas,Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 1: Principes de conception pour les signaux de sécurité sur les lieux de travail et dans les lieux publics,2002-06-20,1,['01.080.10'],ISO/TC 145/SC 2,9599,[9454],"[51021,51000]","['en','fr']",21,"<p>ISO 3864-1:2002 establishes the safety identification colours and design principles for safety signs to be used in workplaces and in public areas for the purpose of accident prevention, fire protection, health hazard information and emergency evacuation. It also establish

9454,IS,,ISO 3864:1984,Safety colours and safety signs,Couleurs et signaux de sécurité,1984-03-01,1,"['01.070','01.080.10','01.080.20']",ISO/TC 145,9599,"[4412,4645]","[31019,23670]","['en','fr']",14,<p>Prescribes graphic symbols for the purposes of preventing accidents and health hazards and meeting emergencies. The use of safety colours and safety signs does not replace proper working instructions and precautionary measures.</p>

31020,IS,,ISO 3864-2:2004,Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels,Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 2: Principes de conception pour l'étiquetage de sécurité des produits,2004-10-18,1,"['01.070','01.080.10','01.080.20']",ISO/TC 145/SC 2,9599,,[66836],"['en','fr','ru']",22,"<p>ISO 3864-2:2004 establishes additional principles to ISO 3864-1 for the design of safety labels for products, i.e. any items manufactured and offered for sale in the normal course of commerce, including but not limited to consumer products and industrial equipment. The purpose of a product safety label is to alert p

57557,IS,Amd,ISO 3864-2:2004/Amd 1:2011,Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels — Amendment 1: Revision of Table B.1,Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 2: Principes de conception pour l'étiquetage de sécurité des produits — Amendement 1: Révision du Tableau B.1,2011-02-25,1,"['01.070','01.080.10','01.080.20']",ISO/TC 145/SC 2,9599,,[66836],"['en','fr','ru']",1,

36993,IS,,ISO 3864-3:2006,Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs,Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 3: Principes de conception des symboles graphiques utilisés dans les signaux de sécurité,2006-04-07,1,['01.080.01'],ISO/TC 145/SC 2,9599,,[55814],"['en','fr']",25,"<p>ISO 3864-3:2006 gives principles, criteria and guidance for the design of graphical symbols for use in safety signs as defined in ISO 3864-1, and the safety sign element of product safety labels as defined in ISO 3864-2.</p>"

55814,IS,,ISO 3864-3:2012,Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs,Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 3: Principes de conception pour les symboles graphiques utilisés dans les signaux de sécurité,2012-02-03,2,['01.080.01'],ISO/TC 145/SC 2,9599,[36993],[86048],"['en','fr','ru']",30,"<p>ISO 3864-3:2012 gives principles, criteria and guidance for the design of graphical symbols for use in safety signs as defined in ISO 3864‑1, and for the safety sign element of product safety labels as defined in ISO 3864‑2.</p>"

9455,IS,,ISO 3865:1983,"Rubber, vulcanized - Methods of test for staining in contact with organic material",Caoutchouc vulcanisé - Méthodes d'essai pour déterminer le tachage lors du contact avec les matières organiques,1983-12-01,2,['83.060'],ISO/TC 45/SC 2,9599,,[9456],"['en','fr']",5,

9456,IS,,ISO 3865:1997,"Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material",Caoutchouc vulcanisé ou thermoplastique — Méthodes d'essai pour déterminer le tachage lors du contact avec les matières organiques,1997-11-27,3,['83.060'],ISO/TC 45/SC 2,9599,[9455],[40387],"['en','fr']",9,

40387,IS,,ISO 3865:2005,"Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material",Caoutchouc vulcanisé ou thermoplastique — Méthodes d'essai pour déterminer le tachage lors du contact avec des matières organiques,2005-07-08,4,['83.060'],ISO/TC 45/SC 2,9599,[9456],[77423],"['en','fr']",9,<p>ISO 3865:2005 specifies three methods for estimating the staining of organic finishes by vulcanized or thermoplastic rubber: method A (contact and migration staining); method B (extraction staining); and method C (penetration staining).</p>

9458,IS,,ISO 3867:1982,Agglomerated cork material of expansion joints for construction and building — Test methods,Aggloméré de liège — Matériau de remplissage de joints de dilatation pour travaux publics et bâtiments — Méthodes d'essai,1982-03-01,1,"['79.100','91.100.50']",ISO/TC 87,9599,,"[28114,9459]","['en','fr']",5,"<p>Covers filler material between elements of construction in concrete or in similar applications, e.g. runways, roads, dams, buildings. The following characteristics are determind: thickness, tensile strength, compression, compression set, transversal expansion, swelling in boiling water, behaviour in hydrochloric acid at 100 °C, and behaviour after artificial ageing.</p>"

28114,IS,,ISO 3867:2001,Composition cork — Expansion joint fillers — Test methods,Aggloméré composé de liège — Matériau pour le remplissage de joints de dilatation — Méthodes d'essai,2001-07-19,2,"['79.100','91.100.50']",ISO/TC 87,9599,[9458],[71185],"['en','fr']",6,

9461,IS,,ISO 3869:1981,"Agglomerated cork — Filler material of expansion joints for construction and buildings — Characteristics, sampling and packing","Aggloméré de liège — Matériau de remplissage de joints de dilatation pour travaux publics et bâtiments — Caractéristiques, échantillonnage et emballage",1981-12-01,1,"['79.100','91.100.50']",ISO/TC 87,9599,,"[9462,28115]","['en','fr']",1,"<p>Establishes the relevant values of the properties determined by the test methods specified in ISO 3867. Applies to filler material between elements of construction in concrete or in similar applications, e.g. runways, roads, dams, buildings.</p>"

28115,IS,,ISO 3869:2001,"Composition cork — Expansion joint fillers — Specifications, packaging and marking","Aggloméré composé de liège — Matériau pour le remplissage de joints de dilatation — Spécifications, emballage et marquage",2001-07-19,2,"['79.100','91.100.50']",ISO/TC 87,9599,[9461],[71186],"['en','fr']",2,

9463,IS,,ISO 3870:1976,"Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials — Adjustment of take-up device",Courroies transporteuses (à carcasse textile) de produits en vrac pour transporteurs jusqu'à 300 m de longueur d'entraxe — Course de réglage du dispositif de tension,1976-11-01,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[9464],"['en','fr']",3,"<p>Describes fixed and automatic take-up devices. Contains recommendations for adjustment values which are valid for the most commonly used belts. Tabulates various types of take-up devices with relation to conveyor lengths from 0 to 12 m up to 150 to 300 m. For belts with a fabric carcase whose len

9465,IS,,ISO 3871:1980,Road vehicles — Labelling of containers for petroleum or non-petroleum base brake fluid,Véhicules routiers — Inscription des récipients contenant du liquide de frein à base pétrolière ou non pétrolière,1980-02-01,3,"['75.120','43.040.40']",ISO/TC 22,9599,,[9466],"['en','fr']",1,

9468,IS,,ISO 3873:1977,Industrial safety helmets,Casques de protection pour l'industrie,1977-03-01,1,['13.340.20'],ISO/TC 94,9599,,[82428],"['en','fr']",8,"<p>Specifies physical and performance requirements, methods of test and marking requirements. The mandatory requirements apply to helmets for general use in industry. Additional optional performance requirements are included: Shock absorption, penetration, flammability, electrical insulation, and lateral rigidity.</p>"

9469,IS,,ISO 3874:1984,Series 1 freight containers — Handling and securing,Conteneurs de la série 1 — Manutention et fixation,1984-07-01,3,['55.180.10'],ISO/TC 104/SC 1,9599,,[9470],"['en','fr']",13,

9470,IS,,ISO 3874:1988,Series 1 freight containers — Handling and securing,Conteneurs de la série 1: Manutention et fixation,1988-07-21,4,['55.180.10'],ISO/TC 104/SC 1,9599,[9469],[26365],"['en','fr']",28,

9471,IS,Amd,ISO 3874:1988/Amd 1:1990,Series 1 freight containers — Handling and securing — Amendment 1,Conteneurs de la série 1: Manutention et fixation — Amendement 1,1990-12-06,4,['55.180.10'],ISO/TC 104/SC 1,9599,,[26365],"['en','fr']",2,

20448,IS,Amd,ISO 3874:1988/Amd 2:1993,Series 1 freight containers — Handling and securing — Amendment 2: 1AAA and 1BBB containers,Conteneurs de la série 1: Manutention et fixation — Amendement 2: Conteneurs 1AAA et 1BBB,1993-02-25,4,['55.180.10'],ISO/TC 104/SC 1,9599,,[26365],"['en','fr']",1,

26365,IS,,ISO 3874:1997,Series 1 freight containers — Handling and securing,Conteneurs de la série 1 — Manutention et fixation,1997-12-25,5,['55.180.10'],ISO/TC 104/SC 1,9599,"[9471,20448,9470]",[63826],"['en','fr']",29,

30725,IS,Amd,ISO 3874:1997/Amd 1:2000,"Series 1 freight containers — Handling and securing — Amendment 1: Twistlocks, latchlocks, stacking fittings and lashing rod systems for securing of containers","Conteneurs de la série 1 — Manutention et fixation — Amendement 1: Verrous tournants, verrous à loquet, dispositifs de gerbage et systèmes de barres de saisissage pour la fixation des conteneurs",2000-11-23,5,['55.180.10'],ISO/TC 104/SC 1,9599,,[63826],"['en','fr']",37,

31886,IS,Amd,ISO 3874:1997/Amd 2:2002,Series 1 freight containers — Handling and securing — Amendment 2: Vertical tandem lifting,Conteneurs de la série 1 — Manutention et fixation — Amendement 2: Levage vertical en tandem,2002-06-20,5,['55.180.10'],ISO/TC 104/SC 1,9599,,[63826],"['en','fr']",1,

39874,IS,Amd,ISO 3874:1997/Amd 3:2005,Series 1 freight containers — Handling and securing — Amendment 3: Double stack rail car operations,Conteneurs de la série 1 — Manutention et fixation — Amendement 3: Gerbage sur deux hauteurs des conteneurs en transport ferroviaire,2005-07-11,5,['55.180.10'],ISO/TC 104/SC 1,9599,,[63826],['en'],2,

39875,IS,Amd,ISO 3874:1997/Amd 4:2007,Series 1 freight containers — Handling and securing — Amendment 4: 45 ft containers,Conteneurs de la série 1 — Manutention et fixation — Amendement 4: Conteneurs de 45 ft,2007-06-25,5,['55.180.10'],ISO/TC 104/SC 1,9599,,[63826],['en'],13,

9472,IS,,ISO 3875:1980,Conditions of acceptance for external cylindrical centreless grinding machines — Testing of the accuracy,"Conditions de réception des machines à rectifier les surfaces de révolution extérieures, sans centres — Contrôle de la précision",1980-08-01,1,['25.080.50'],ISO/TC 39,9599,,[9473],"['en','fr']",13,

9473,IS,,ISO 3875:1990,Acceptance conditions for external cylindrical centreless grinding machines — Testing of the accuracy,"Conditions de réception des machines à rectifier les surfaces de révolution extérieures, sans centres — Contrôle de la précision",1990-06-28,2,['25.080.50'],ISO/TC 39/SC 2,9599,[9472],[30668],"['en','fr']",15,"<p>Specifies both geometrical and practical tests on these general purpose and normal accuracy grinding machines, and gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of comp

30668,IS,,ISO 3875:2004,Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy,Conditions d'essai des machines à rectifier les surfaces extérieures sans centres — Contrôle de la précision,2004-01-06,3,['25.080.50'],ISO/TC 39/SC 2,9599,[9473],"[66846,73813]","['en','fr']",15,"<p>ISO 3875:2004 specifies, with reference to ISO 230-1 and 230-2, geometric tests, machining tests and tests for accuracy and repeatability of positioning axes on general purpose and normal accuracy external cylindrical centreless grinding machines. It also specifies the applicable tolerances corresponding to the above-mentioned tests.</p>"

9474,IS,,ISO 3876:1977,Shipbuilding — Inland vessels — Hand-holes,Construction navale — Bateaux de navigation intérieure — Trous de main,1977-01-01,1,['47.060'],ISO/TC 8/SC 7,9599,,[9475],"['en','fr']",3,

9477,IS,,ISO 3877-1:1978,"Tyres, valves and tubes — List of equivalent terms — Part 1: Tyres","Pneus, valves et chambres à air — Liste des termes équivalents — Partie 1: Pneus",1978-05-01,1,"['01.040.83','83.160.01']",ISO/TC 31,9599,,[25344],"['en','fr','ru']",43,

9479,IS,,ISO 3877-2:1978,"Tyres, valves and tubes — List of equivalent terms — Part 2: Tyre valves","Pneus, valves et chambres à air — Liste des termes équivalents — Partie 2: Valves pour pneumatiques",1978-05-01,1,"['01.040.83','83.160.01']",ISO/TC 31,9599,,[25345],"['en','fr','ru']",25,

9484,IS,,ISO 3878:1983,Hardmetals — Vickers hardness test,Métaux-durs — Essai de dureté Vickers,1983-08-01,2,"['77.160','77.040.10']",ISO/TC 119/SC 4,9599,,[61268],"['en','fr']",2,"<p>This second edition cancels and replaces the first edition (i.e. ISO 3878:1976). Specifies principle, symbols and designations, apparatus, test pieces, procedure, expression of results and test report.</p>"

9485,IS,,ISO 3879:1977,Welded joints — Recommended practice for liquid penetrant testing,Joints soudés — Pratiques recommandées pour l'examen par ressuage,1977-09-01,1,['25.160.40'],ISO/TC 44,9599,,[8787],"['en','fr']",5,

9488,IS,,ISO 3882:1976,Metallic and other non-organic coatings — Review of methods of measurement of thickness,Revêtements métalliques et autres revêtements non organiques — Vue d'ensemble sur les méthodes de mesurage de l'épaisseur,1976-11-01,1,"['25.220.20','25.220.40']",ISO/TC 107,9599,,[9489],"['en','fr']",4,

9489,IS,,ISO 3882:1986,Metallic and other non-organic coatings — Review of methods of measurement of thickness,Revêtements métalliques et autres revêtements non organiques — Vue d'ensemble sur les méthodes de mesurage de l'épaisseur,1986-03-27,2,"['25.220.20','25.220.40']",ISO/TC 107,9599,[9488],[32444],"['en','fr']",5,"<p>This second edition cancels and replaces the first edition (i. e. ISO 3882:1978). Applies to both metallic and non-metallic substrates. It is limited to tests already specified, or to be specified, in International Standards, and excludes certain tests which are employed for special applications. Includes five non-destructive methods and four destructive methods.</p>" 9490

32444,IS,,ISO 3882:2003,Metallic and other inorganic coatings — Review of methods of measurement of thickness,Revêtements métalliques et autres revêtements inorganiques — Vue d'ensemble sur les méthodes de mesurage de l'épaisseur,2003-04-25,3,"['25.220.20','25.220.40']",ISO/TC 107,9599,[9489],[81825],"['en','fr']",9,"<p>ISO 3882:2003 reviews methods for measuring the thickness of metallic and other inorganic coatings on both metallic and non-metallic substrates. It is limited to tests already specified, or to be specified, in International Standards, and excludes certain tests that are used for special applications.</p>"

9491,IS,,ISO 3886:1977,Iron ores — Determination of manganese content — Spectrophotometric method,Minerais de fer — Dosage du manganèse — Méthode spectrophotométrique,1977-03-01,1,['73.060.10'],ISO/TC 102,9599,,[9492],"['en','fr']",7,

9492,IS,,ISO 3886:1986,Iron ores — Determination of manganese content — Periodate spectrophotometric method,Minerais de fer — Dosage du manganèse — Méthode spectrophotométrique au periodate,1986-06-26,2,['73.060.10'],ISO/TC 102/SC 2,9599,[9491],[43952],"['en','fr']",9,"<p>This second edition cancels and replaces the first edition (ISO 3886:1977), some clauses and annex A of which have been technically revised. The method is applicable to a concentration range of 0,02 to 8 % (m/m) of manganese in natural iron ores, and iron ore concentrates and agglomerates including sinter products.</p>"

9493,IS,,ISO 3887:1976,"Steel, non-alloy and low-alloy — Determination of depth of decarburization",Aciers non alliés et faiblement alliés — Détermination de la profondeur de décarburation,1976-11-01,1,['77.040.99'],ISO/TC 17/SC 7,9599,,[30696],"['en','fr']",3,"<p>Defines carburization and specifies three methods of measuring the depth of decarburization of non-alloy and low-alloy steels (micrographic method, method of measuring the micro-hardness and methods of determination of carbon content).</p>"

30696,IS,,ISO 3887:2003,Steels — Determination of depth of decarburization,Aciers — Détermination de la profondeur de décarburation,2003-03-05,2,['77.040.99'],ISO/TC 17/SC 7,9599,[9493],[68457],"['en','fr']",8,<p>ISO 3887:2003 defines decarburization and specifies three methods of measuring the depth of decarburization of non-alloy and low-alloy steels.</p>

68457,IS,,ISO 3887:2017,Steels — Determination of the depth of decarburization,Aciers — Détermination de la profondeur de décarburation,2017-11-17,3,['77.040.99'],ISO/TC 17/SC 7,9599,[30696],[86689],"['en','fr']",13,<p>ISO 3887:2017 defines the decarburization and specifies three methods of measuring the depth of decarburization of steel products.</p>

31317,IS,,ISO 3888-1:1999,Passenger cars — Test track for a severe lane-change manoeuvre — Part 1: Double lane-change,Voitures particulières — Piste d'essai de déboîtement latéral brusque — Partie 1: Double déboîtement,1999-09-30,1,"['43.180','43.100']",ISO/TC 22/SC 33,9599,"[26686,9494]",[67973],"['en','fr']",5,

31310,IS,,ISO 3888-2:2002,Passenger cars — Test track for a severe lane-change manoeuvre — Part 2: Obstacle avoidance,Voitures particulières — Piste d'essai de déboîtement latéral brusque — Partie 2: Évitement d'obstacle,2002-11-21,1,"['43.180','43.100']",ISO/TC 22,9599,,[57253],"['en','fr']",6,"<p>ISO 3888-2:2002 defines the dimensions of the test track for a closed-loop, severe lane-change manoeuvre test for subjectively determining the obstacle avoidance performance of a vehicle: one specific part of vehicle dynamics and road-holding ability. It is applicable to passenger cars as defined in ISO 3833 and light commercial vehicles up to a gross vehicle mass of 3,5 tonnes.</p>"

57253,IS,,ISO 3888-2:2011,Passenger cars — Test track for a severe lane-change manoeuvre — Part 2: Obstacle avoidance,Voitures particulières — Piste d'essai de déboîtement latéral brusque — Partie 2: Évitement d'obstacle,2011-03-11,2,"['43.180','43.100']",ISO/TC 22/SC 33,9599,[31310],[86381],['en'],5,"<p>ISO 3888-2:2011 defines the dimensions of the test track for a closed-loop, severe lane-change manoeuvre test for subjectively determining the obstacle avoidance performance of a vehicle, one specific part of vehicle dynamics and road-holding ability. It is applicable to passenger cars as defined in ISO 3833 and light commercial vehicles up to a gross vehicle mass of 3,5 t.</p>"

9495,IS,,ISO 3889:1977,Milk and milk products — Determination of fat content — Mojonnier-type fat extraction flasks,"Lait et produits laitiers — Détermination de la teneur en matière grasse — Fioles d'extraction, type Mojonnier",1977-03-01,1,['67.260'],ISO/TC 34/SC 5,9599,,[44509],"['en','fr']",3,<p>Specifies the characteristics of flasks for gravimetric methods. The flasks to be made from borosilcate glass are designed to enable a supernatant solvent layer to be decanted almost completely from an underlaying aqueous layer. A figure shows three permissible forms of flask whose dimensions are listed in a table. A second table gives guidance on additional dimensions for these flask types.</p>

30443,IS,,ISO 389-1:1998,Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones,Acoustique — Zéro de référence pour l'étalonnage d'équipements audiométriques — Partie 1: Niveaux de référence équivalents de pression acoustique liminaire pour les écouteurs à sons purs supra-auraux,1998-10-29,1,['13.140'],ISO/TC 43,9599,[4375],"[31692,69855,45102]","['en','fr']",8,

53428,IS,,ISO 389:1975,Acoustics — Reference zero for the calibration of audiometric equipment,Acoustique — Zéro de référence pour l'étalonnage d'équipements audiométriques,1975-01-15,1,['13.140'],ISO/TC 43,9599,,[4374],"['en','fr']",4,

4374,IS,,ISO 389:1985,Acoustics — Standard reference zero for the calibration of pure tone air conduction audiometers,Acoustique — Zéro normal de référence pour l'étalonnage des audiomètres à sons purs en conduction aérienne,1985-03-14,2,['13.140'],ISO/TC 43,9599,[53428],[4375],"['en','fr']",,

4375,IS,,ISO 389:1991,Acoustics — Standard reference zero for the calibration of pure-tone air conduction audiometers,Acoustique — Zéro normal de référence pour l'étalonnage des audiomètres à sons purs en conduction aérienne,1991-03-07,3,['13.140'],ISO/TC 43,9599,[4374],[30443],"['en','fr']",6,

22495,IS,,ISO 389-3:1994,Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators,Acoustique — Zéro de référence pour l'étalonnage d'équipements audiométriques — Partie 3: Niveaux de référence équivalents de force liminaire pour les vibrateurs à sons purs et les ossivibrateurs,1994-09-22,1,['13.140'],ISO/TC 43,9599,[14349],[59759],"['en','fr']",10,"<p>Specifies the following data applicable to the calibration of bone vibrators for pure-tone bone-conduction audiometry: reference equivalent threshold force levels (RETFL), corresponding to the threshold of hearing of young otologically normal

26022,IS,Cor,ISO 389-3:1994/Cor 1:1995,Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators — Technical Corrigendum 1,Acoustique — Zéro de référence pour l'étalonnage d'équipements audiométriques — Partie 3: Niveaux de référence équivalents de force liminaire pour les vibrateurs à sons purs et les ossivibrateurs — Rectificatif technique 1,1995-08-03,1,['13.140'],ISO/TC 43,9599,,[59759],"['en','fr']",1,<p>Corrigendum relates to the first section of table A.1 and reference 4 in annex E.</p>

22800,IS,,ISO 389-7:1996,Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions,Acoustique — Zéro de référence pour l'étalonnage d'équipements audiométriques — Partie 7: Niveau liminaire de référence dans des conditions d'écoute en champ libre et en champ diffus,1996-12-26,1,['13.140'],ISO/TC 43,9599,,[38976],"['en','fr']",9,<p>Specifies a reference threshold of hearing for the calibration of audiometric equipment used under definite conditions. The listeners are otologically normal persons in the age from 18 to 25 years inclusive. The data are given in numerical form for the pre

38976,IS,,ISO 389-7:2005,Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions,Acoustique — Zéro de référence pour l'étalonnage d'équipements audiométriques — Partie 7: Niveau liminaire de référence dans des conditions d'écoute en champ libre et en champ diffus,2005-11-03,2,['13.140'],ISO/TC 43,9599,[22800],"[56053,77365]","['en','fr']",10,"<p>ISO 389-7:2005 specifies a reference threshold of hearing for the calibration of audiometric equipment used under the following conditions. </p><ol><li>The sound field in the absence of the listener consists of either a free progressive pl

67239,IS,Amd,ISO 389-7:2005/Amd 1:2016,Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions — Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions,Acoustique — Zéro de référence pour l'étalonnage d'équipements audiométriques — Partie 7: Niveau liminaire de référence dans des conditions d'écoute en champ libre et en champ diffus — Amendement 1: Seuil d’audition de référence à 20 Hz et 18 000 Hz dans des conditions d’écoute en champ libre et à 20 Hz dans des conditions d’écou

33052,IS,,ISO 3890-1:2000,Milk and milk products — Determination of residues of organochlorine compounds (pesticides) — Part 1: General considerations and extraction methods,Lait et produits laitiers — Détermination des résidus de composés organochlorés (pesticides) — Partie 1: Considérations générales et méthodes d'extraction,2000-07-06,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[53826],"['en','fr']",16,

29065,IS,,ISO 3890-2:2000,Milk and milk products — Determination of residues of organochlorine compounds (pesticides) — Part 2: Test methods for crude extract purification and confirmation,Lait et produits laitiers — Détermination des résidus de composés organochlorés (pesticides) — Partie 2: Méthodes d'essai pour la purification des extraits bruts et tests de confirmation,2000-08-10,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[53827],"['en','fr']",28,

9498,IS,,ISO 3892:1980,Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods,Couches de conversion sur matériaux métalliques — Détermination de la masse par unité de surface — Méthodes gravimétriques,1980-09-01,1,['25.220.20'],ISO/TC 107,9599,,"[22698,32968]","['en','fr']",3,