DIN 963 · M8 · dk max.

For DIN 963, size is M8; dimension that differs is dk max; iso standard is ISO 2009; din value is 14.5; iso value is 15.8, verified against its source on 2026-10-12.

What the source says

ISO standard, DIN value and ISO value

The source prints these values inside the passage below but does not name them there. The passage shows where each one appears; what ties them to this record is the position on the page, not anything the passage says.

Thread M1.6 M2 M2.5 M3 M3.5 M4 M5 M6 M8 M10 ISO 7045 3.2 4 5 5.6 7 8 9.5 12 16 20 dk max. DIN 7985 3.2 4 5 6 7 8 10 12 16 20 ISO 7045 1.3 1.6 2.1 2.4 2.6 3.1 3.7 4.6 6 7.5 kmax. DIN 7985 1.3 1.6 2 2.4 2.7 3.1 3.8 4.6 6 7.5 ISO 7046-Part 1 + 2* 3 3.8 4.7 5.5 7.3 8.4 9.3 11.3 15.8 18.3 dk max. DIN 965 3 3.8 4.7 5.6 6.5 7.5 9.2 11 14.5 18 ISO 7046-Part 1 + 2* 1 1.2 1.5 1.65 2.35 2.7 2.7 3.3 4.65 5 kmax. DIN 965 0.96 1.2 1.5 1.65 1.93 2.2 2.5 3 4 5 ISO 7047 3 3.8 4.7 5.5 7.3 8.4 9.3 11.3 15.8 18.3 dk max. DIN 966 3 3.8 4.7 5.6 6.5 7.5 9.2 11 14.5 18 ISO 7047 1 1.2 1.5 1.65 2.35 2.7 2.7 3.3 4.65 5 kmax. DIN 966 0.96 1.2 1.5 1.65 1.93 2.2 2.5 3 4 5 ISO 2009 3 3.8 4.7 5.5 7.3 8.4 9.3 11.3 15.8 18.3 dk max. DIN 963 3 3.8 4.7 5.6 6.5 7.5 9.2 11 14.5 18

— wurthindustry.ca, retrieved 2026-09-22

Source

• wurthindustry.cahttps://www.wurthindustry.ca/media/downloads/wic_pdfs/Fasteners_DIN-EN-ISO_Standards.pdf

Last verified against source: 2026-10-12. Due for re-check by 2029-10-11. This page as Markdown · OKF bundle · full dataset as JSON.