P20
For P20, manufacturer is Kennametal; grade designation(s) is KC725M KC9125 KC9040 KC625M KC850 CM4 KC9025 KC631M, recorded from its source on 2026-08-11.
- ISO application code
- P20 verified
- Manufacturer
- Kennametal our reading
- Grade designation(s)
- KC725M KC9125 KC9040 KC625M KC850 CM4 KC9025 KC631M verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
P20 | R-200 R-300 | UC6010 UE6020 UC6025 F620 F7030 UP20M AP20M | GC4020 GC4025 GC4225 GC4030 GC3040 | TP200 T250M T25M CP20 F25M | AC230 AC2000 AC3000 | TD915 T7020 | KC725M KC9125 KC9040 KC625M KC850 CM4 KC9025 KC631M |
— romaycorp.com, retrieved 2026-08-11
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Grade designation(s)
romaycorp.com says grade designation(s) is KC725M KC9125 KC9040 KC625M KC850 CM4 KC9025 KC631M, as of 2026-08-11.
P20 | R-200 R-300 | UC6010 UE6020 UC6025 F620 F7030 UP20M AP20M | GC4020 GC4025 GC4225 GC4030 GC3040 | TP200 T250M T25M CP20 F25M | AC230 AC2000 AC3000 | TD915 T7020 | KC725M KC9125 KC9040 KC625M KC850 CM4 KC9025 KC631M |
https://romaycorp.com/charts/carbide-comparison-chart/
aceratool.com says grade designation(s) is KC8050 KC9025 KC9125, as of 2026-08-11.
P20 | AC1125 AC1225 | GC4015 GC4225 GC4025 GC4215 LC25 | NC3015 NC3020 NC500H | TT1500 | WAP20 | UC6010 UE6110 UE6020 F7030 | AC2000 AC3000 AC820P | T9015 T9025 | CA5515 CA5525 CA5025 CR9025 | JC110V JC215V JC730U | HG8025 GM8020 | KC8050 KC9025 KC9125 |
Sources
- romaycorp.comhttps://romaycorp.com/charts/carbide-comparison-chart/
- aceratool.comhttps://www.aceratool.com/carbide-insert-grades-chart/