Reference Source

Alaska

What is the governing body for Alaska?

For Alaska, governing body is Alaska Department of Labor and Workforce Development, Mechanical Inspection Section; statute citation is Alaska Statutes Title 18, Chapter 60 Boilers and Unfired Pressure Vessels 18.60.180; power boiler inspection interval is certificate inspection annually; external inspection while under pressure, or internal inspection as warranted; low-pressure boiler inspection interval is certificate inspection every two years with an internal inspection every four years if construction permits; pressure vessel inspection interval is inspected internally and externally at intervals set by the Department of Labor and Workforce Development, recorded from its source on 2026-08-05.

Alaska Statutes Title 18, Chapter 60 Boilers and Unfired Pressure Vessels 18.60.180 RULES FOR CONSTRUCTION AND STAMPING Construction:

nationalboard.org, retrieved 2026-08-05

State
Alaska verified
Governing body
Alaska Department of Labor and Workforce Development, Mechanical Inspection Section
Statute citation
Alaska Statutes Title 18, Chapter 60 Boilers and Unfired Pressure Vessels 18.60.180 verified
Power boiler inspection interval
certificate inspection annually; external inspection while under pressure, or internal inspection as warranted
Low-pressure boiler inspection interval
certificate inspection every two years with an internal inspection every four years if construction permits
Pressure vessel inspection interval
inspected internally and externally at intervals set by the Department of Labor and Workforce Development
Accepted inspector types
Department inspector; insurance company inspectors (inspections accepted in lieu of department inspector); special inspector commission may be issued to insurance inspectors or owner/user inspectors holding a Certificate of Competency or commission issued by a state that has adopted the ASME Code
Exemptions
Boilers and unfired pressure vessels under federal regulation; unfired pressure vessels meeting US DOT requirements for shipment; air tanks on vehicles under other state authorities; air tanks on railroad rights-of-way; unfired pressure vessels of 5 cubic feet or less or inside diameter not exceeding 6 inches; unfired pressure vessels designed for pressure not exceeding 15 psi when not in places of public assembly; manually-fired miniature boilers as a hobby (volume less than 5 cubic feet, grate area less than 2 square feet); antique manually-fired boilers as a hobby; automatic utility hot-water heaters used for space heating not exceeding 120 gallons/210°F/150 psig/200,000 BTU/hr with tempering valve; farm agricultural boilers; steam and hot-water heating boilers in private residences or fewer than six families; unfired pressure vessels containing only cold water for domestic supply; unfired pressure vessels containing liquefied petroleum gas; unfired pressure vessels entirely full of water/hot-water supply boilers not exceeding 200,000 BTU/hr, 210°F, 120 gallons; coil-type boilers below specified limits
Sourcenationalboard.org
Verified
Review by
DatasetUS boiler and pressure vessel inspection requirements by state

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.