Roofing work on Low-slope roofs · 1926.501 Duty to have fall protection

What is the hazard situation for Roofing work on Low-slope roofs · 1926.501 Duty to have fall protection?

For Roofing work on Low-slope roofs · 1926.501 Duty to have fall protection, hazard situation is Roofing work on Low-slope roofs; standard is 1926.501 Duty to have fall protection; trigger height is 6 feet (1.8 m) or more above lower levels; required protection once triggered is guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system; subpart is Subpart M —Fall Protection, recorded from its source on 2026-08-25; source re-checked 2026-09-14.

(10) Roofing work on Low-slope roofs. Except as otherwise provided in <https://www.ecfr.gov/current/title-29/section-1926.501#p-1926.501(b)> paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see appendix A to <https://www.ecfr.gov/current/title-29/part-1926/subpart-M> subpart M of this part ), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted.

— ecfr.gov, retrieved 2026-08-25