Reference Source

Leading edges · 1926.501 Duty to have fall protection

What is the hazard situation for Leading edges · 1926.501 Duty to have fall protection?

For Leading edges · 1926.501 Duty to have fall protection, hazard situation is Leading edges; standard is 1926.501 Duty to have fall protection; trigger height is 6 feet (1.8 m) or more above lower levels; required protection once triggered is guardrail systems, safety net systems, or personal fall arrest systems; subpart is Subpart M —Fall Protection, recorded from its source on 2026-08-25; source re-checked 2026-09-14.

(2) Leading edges. (i) Each employee who is constructing a leading edge 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, or personal fall arrest systems. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of <https://www.ecfr.gov/current/title-29/section-1926.502#p-1926.502(k)> paragraph (k) of § 1926.502 .

ecfr.gov, retrieved 2026-08-25

Hazard situation
Leading edges verified
Standard
1926.501 Duty to have fall protection verified
Trigger height
6 feet (1.8 m) or more above lower levels verified
Required protection once triggered
guardrail systems, safety net systems, or personal fall arrest systems verified
Subpart
Subpart M —Fall Protection verified
CFR paragraph
29 CFR 1926.501(b)(2) our reading
Sourceecfr.gov
Verified
Review by
DatasetOSHA fall protection trigger height by standard

Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.