Reference Source

Scaffolds and rope descent systems · 1910.28 Duty to have fall protection and falling object protection

What is the hazard situation for Scaffolds and rope descent systems · 1910.28 Duty to have fall protection and falling object protection?

For Scaffolds and rope descent systems · 1910.28 Duty to have fall protection and falling object protection, hazard situation is Scaffolds and rope descent systems; standard is 1910.28 Duty to have fall protection and falling object protection; trigger height is 4 feet (1.2 m) or more above a lower level; required protection once triggered is protected from falling by a personal fall arrest system; subpart is Subpart D —Walking-Working Surfaces, recorded from its source on 2026-08-25; source re-checked 2026-09-14.

(12) Scaffolds and rope descent systems. The employer must ensure: (i) Each employee on a scaffold is protected from falling in accordance <https://www.ecfr.gov/current/title-29/part-1926/subpart-L> 29 CFR part 1926, subpart L ; and (ii) Each employee using a rope descent system 4 feet (1.2 m) or more above a lower level is protected from falling by a personal fall arrest system.

ecfr.gov, retrieved 2026-08-25

Hazard situation
Scaffolds and rope descent systems verified
Standard
1910.28 Duty to have fall protection and falling object protection verified
Trigger height
4 feet (1.2 m) or more above a lower level verified
Required protection once triggered
protected from falling by a personal fall arrest system verified
Subpart
Subpart D —Walking-Working Surfaces verified
CFR paragraph
29 CFR 1910.28(b)(12) our reading
Sourceecfr.gov
Verified
Review by
DatasetOSHA fall protection trigger height by standard

Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.