Reference Source

Gas meters and volume conversion devices · Annex IV · gas meter at metering conditions or mass, class 1,0, Qmin ≤ Q < Qt

For Gas meters and volume conversion devices, annex is Annex IV; condition is gas meter at metering conditions or mass, class 1,0, Qmin ≤ Q < Qt; accuracy class is 1,0; maximum permissible error is 2 %, recorded from its source on 2026-09-01.

Instrument type
Gas meters and volume conversion devices verified
Annex
Annex IV verified
Accuracy class
1,0 verified
Condition
gas meter at metering conditions or mass, class 1,0, Qmin ≤ Q < Qt our reading
Maximum permissible error
2 % verified
Sourceeur-lex.europa.eu
Verified
Review by
DatasetAccuracy classes and maximum permissible errors for trade measuring instruments

Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.

What the source says

2.1. Gas meter indicating the volume at metering conditions or mass Table 1 Class | 1,5 | 1,0 | Qmin ≤ Q < Qt | 3 % | 2 % | Qt ≤ Q ≤ Qmax | 1,5 % | 1 % | The gas meter shall not exploit the MPEs or systematically favour any party.

— eur-lex.europa.eu, retrieved 2026-09-01

Where each value comes from

This source states these in separate places, so each value is shown with the passage it comes from.

Instrument type

ANNEX IV GAS METERS AND VOLUME CONVERSION DEVICES (MI-002) The relevant requirements of Annex I, the specific requirements of this Annex and the conformity assessment procedures listed in this Annex, apply to gas meters and volume conversion devices defined below, intended for residential, commercial and light industrial use.

Annex

ANNEX IV GAS METERS AND VOLUME CONVERSION DEVICES (MI-002)

Accuracy class

The source prints this value inside the passage below but does not name it there. The passage shows where it appears; what ties it to this record is the position on the page, not anything the passage says.

2.1. Gas meter indicating the volume at metering conditions or mass Table 1 Class | 1,5 | 1,0

Maximum permissible error

2.1. Gas meter indicating the volume at metering conditions or mass Table 1 Class | 1,5 | 1,0 | Qmin ≤ Q < Qt | 3 % | 2 %

— all from eur-lex.europa.eu, retrieved 2026-09-01

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.