Withdrawn and superseded ISO standards — page 88 of 246

44059,IS,,ISO 25239-4:2011,Friction stir welding — Aluminium — Part 4: Specification and qualification of welding procedures,Soudage par friction-malaxage — Aluminium — Partie 4: Descriptif et qualification des modes opératoires de soudage,2011-12-16,1,['25.160.10'],IIW,9599,,"[77962,69623]","['en','fr']",22,"<p>ISO 25239-4:2011 specifies the requirements for the specification and qualification of welding procedures for the friction stir welding (FSW) of aluminium. In ISO 25239-4:2011, the term 'aluminium' refers to aluminium and its alloys.</p><p>ISO 25239-4:2011 does not apply to friction stir spot welding.</p>"

44060,IS,,ISO 25239-5:2011,Friction stir welding — Aluminium — Part 5: Quality and inspection requirements,Soudage par friction-malaxage — Aluminium — Partie 5: Exigences de qualité et de contrôle,2011-12-16,1,['25.160.10'],IIW,9599,,"[77963,69624]","['en','fr']",9,"<p>ISO 25239-5:2011 specifies a method for determining the capability of a manufacturer to use the friction stir welding (FSW) process for production of products of the specified quality. It specifies quality requirements, but does not assign those requirements to any specific product group.</p><p>In ISO 25239-5:2011, the term 'aluminium' refers to aluminium and its alloys.</p><p>ISO 25239-5:2011 does not apply to friction stir s

7464,IS,,ISO 2528:1974,Sheet materials — Determination of water vapour transmission rate — Dish method,Produits en feuilles et en plaques — Détermination du coefficient de transmission de la vapeur d'eau — Méthode de la capsule,1974-11-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[20676],"['en','fr']",9,

20676,IS,,ISO 2528:1995,Sheet materials — Determination of water vapour transmission rate — Gravimetric (dish) method,Produits en feuilles — Détermination du coefficient de transmission de la vapeur d'eau — Méthode (de la capsule) par gravimétrie,1995-08-24,2,['85.060'],ISO/TC 6/SC 2,9599,[7464],[72382],"['en','fr']",11,"<p>Specifies a method for the determination of the water vapour transmission rate of sheet materials. Not applicable to film materials that are damaged by hot wax or that shrink under the test conditions. Cancels and replaces the first edition, which has been technically revised.</p>"

46570,IS,,ISO 25297-1:2010,Optics and photonics — Electronic exchange of optical data — Part 1: NODIF information model,Optique et photonique — Transfert électronique des données optiques — Partie 1: Modèle de données NODIF,2010-07-16,1,['37.020'],ISO/TC 172/SC 1,9599,,[60265],['en'],85,"<p>ISO 25297-1:2010 specifies the information requirements for optical systems and parts, and provides an information model to support the processes of optical design, optical evaluation and analysis for these optical systems and parts when using computers with CAD and CAE.</p><p>This information model adds the data peculiar to optical design specification based on STEP to ISO 10303 (all parts). The addition

7466,IS,,ISO 2530:1975,Keyboard for international information processing interchange using the ISO 7- bit coded character set — Alphanumeric area,Clavier pour échanges internationaux en traitement de l'information employant le jeu ISO de caractères codés à 7 éléments — Zone alphanumérique,1975-07-01,1,['35.180'],ISO/IEC JTC 1,9599,,"[17914,17910,17911,17915,17912,17909,17913]","['en','fr']",7,

7467,IS,,ISO 2531:1979,"Ductile iron pipes, fittings and accessories for pressure pipe-lines","Tuyaux, raccords et pièces accessoires en fonte ductile pour canalisations avec pression",1979-09-01,2,"['23.040.10','77.140.75','23.040.40']",ISO/TC 5,9599,,[7468],"['en','fr']",36,

7470,IS,Add,ISO 2531:1979/Add 1:1980,"Ductile iron pipes, fittings and accessories for pressure pipe-lines — Addendum 1","Tuyaux, raccords et pièces accessoires en fonte ductile pour canalisations avec pression — Additif 1",1980-11-01,2,['23.040.10'],ISO/TC 5,9599,,[7468],['en'],4,

7468,IS,,ISO 2531:1986,"Ductile iron pipes, fittings and accessories for pressure pipelines","Tuyaux, raccords et pièces accessoires en fonte ductile pour canalisations avec pression",1986-12-18,3,"['23.040.10','77.140.75','23.040.40']",ISO/TC 5/SC 2,9599,"[7470,7467]",[7469],"['en','fr']",46,

7469,IS,,ISO 2531:1991,"Ductile iron pipes, fittings and accessories for pressure pipelines","Tuyaux, raccords et pièces accessoires en fonte ductile pour canalisations avec pression",1991-10-24,4,"['23.040.10','77.140.75','23.040.40']",ISO/TC 5/SC 2,9599,[7468],[27385],"['en','fr']",47,

27385,IS,,ISO 2531:1998,"Ductile iron pipes, fittings, accessories and their joints for water or gas applications","Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour l'eau ou le gaz",1998-08-20,5,"['77.140.75','91.140.60','91.140.40']",ISO/TC 5/SC 2,9599,[7469],[40396],"['en','fr']",46,

7475,IS,,ISO 2534:1974,Road vehicles — Engine test code — Gross power,Véhicules routiers — Code d'essai des moteurs — Puissance brute,1974-08-01,1,['43.060.01'],ISO/TC 22,9599,,[7476],"['en','fr']",14,

7476,IS,,ISO 2534:1998,Road vehicles — Engine test code — Gross power,Véhicules routiers — Code d'essai des moteurs — Puissance brute,1998-08-27,2,['43.060.01'],ISO/TC 22/SC 34,9599,[7475],[70654],"['en','fr']",29,

7477,IS,,ISO 2535:1974,Plastics — Unsaturated polyester resins — Measurement of gel time at 25 degrees C,Plastiques — Résines de polyesters non saturés — Mesurage de la durée de gélification à 25 degrés C,1974-06-01,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[27070],"['en','fr']",3,

27070,IS,,ISO 2535:1997,Plastics — Unsaturated polyester resins — Measurement of gel time at 25 degrees C,Plastiques — Résines de polyesters non saturés — Mesurage du temps de gélification à 25 degrés C,1997-03-06,2,['83.080.10'],ISO/TC 61/SC 12,9599,[7477],[30340],"['en','fr']",5,

7480,IS,,ISO 2537:1985,Liquid flow measurement in open channels — Cup-type and propeller-type current-meters,Mesure de débit des liquides dans les canaux découverts — Moulinets à coupelles et à hélices,1985-09-19,2,['17.120.20'],ISO/TC 113,9599,,[7481],['fr'],,

7482,IS,Amd,ISO 2537:1985/Amd 1:1983,Liquid flow measurement in open channels — Cup-type and propeller-type current-meters — Amendment 1,Mesure de débit des liquides dans les canaux découverts — Moulinets à coupelles et à hélices — Amendement 1,1983-10-01,2,['17.120.20'],ISO/TC 113,9599,,[7481],['en'],1,

7481,IS,,ISO 2537:1988,Liquid flow measurement in open channels — Rotating element current-meters,Mesure de débit des liquides dans les canaux découverts — Moulinets à élément rotatif,1988-06-09,3,['17.120.20'],ISO/TC 113/SC 5,9599,"[7482,7480]",[37098],"['en','fr']",5,"<p>Specifies the operational requirements, construction, calibration, and maintenance of rotating element devices for the measurement of flow velocities in open channels. Does not define the form of the signal produced by the equipment or the signal receiving equipment. Cancels and replaces the second edition (ISO 2537 : 1985), of which it constitutes a technical revision.</p>"

7483,IS,,ISO 2538:1974,Limits and fits — Series of angles and slopes on wedges and prisms,Ajustements — Séries d'angles et d'inclinaisons de prismes,1974-04-01,1,['17.040.01'],ISO/TC 213,9599,,[28069],"['en','fr']",5,

28069,IS,,ISO 2538:1998,Geometrical Product Specifications (GPS) — Series of angles and slopes on prisms,Spécification géométrique des produits (GPS) — Séries d'angles et d'inclinaisons de prismes,1998-09-03,2,['17.040.01'],ISO/TC 213,9599,[7483],"[56783,54836]","['en','fr']",9,

7484,IS,,ISO 2539:1974,Withdrawal of ISO 2539-1974,Annulation de l'ISO 2539-1974,1974-07-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",15,

4151,IS,,ISO 254:1981,"Quality, finish and balance of transmission pulleys","Qualité, état de surface et équilibrage des poulies de transmission",1981-07-01,1,['21.220.10'],ISO/TC 41,9599,,[4152],"['en','fr']",3,

4152,IS,,ISO 254:1990,"Belt drives — Pulleys — Quality, finish and balance","Transmissions par courroies — Poulies — Qualité, état de surface et équilibrage",1990-09-27,2,['21.220.10'],ISO/TC 41/SC 1,9599,[4151],[25451],['en'],3,

25451,IS,,ISO 254:1998,"Belt drives — Pulleys — Quality, finish and balance","Transmissions par courroies — Poulies — Qualité, état de surface et équilibrage",1998-08-20,3,['21.220.10'],ISO/TC 41/SC 1,9599,[4152],[56057],"['en','fr']",4,

7485,IS,,ISO 2540:1973,Centre drills for centre holes with protecting chamfer — Type B,Forets à centrer pour centres avec chanfrein de protection — Type B,1973-04-01,1,['25.100.30'],ISO/TC 29/SC 9,9599,,[64194],"['en','fr']",2,

7486,IS,,ISO 2541:1972,Centre drills for centre holes with radius form — Type R,Forets à centrer pour centres à profil curviligne — Type R,1972-12-01,1,['25.100.30'],ISO/TC 29/SC 9,9599,,[64195],"['en','fr']",2,

7487,IS,,ISO 2542:1980,Internal combustion engines — Spark plug ignition — Terminology,Moteurs à explosion — Allumage par bougies — Terminologie,1980-12-01,2,"['43.060.50','01.040.43']",ISO/TC 22/SC 32,9599,,[35016],"['en','fr','ru']",2,"<p>Defines the main terms (given in English, French, and Russian) relating to those phenomena leading to uncontrolled engine ignition, and some characteristics of the spark plugs. A figure illustrates the meaning of the text and reference quantities of concern. This second edition cancels and replaces the first edition (1972).</p>"

51772,IS,,ISO 25424:2009,"Sterilization of medical devices — Low temperature steam and formaldehyde — Requirements for development, validation and routine control of a sterilization process for medical devices","Stérilisation des dispositifs médicaux — Formaldéhyde et vapeur à faible température — Exigences pour le développement, la validation et le contrôle de routine d'un procédé de stérilisation pour dispositifs médicaux",2009-08-14,1,['11.080.01'],ISO/TC 198,9599,,[70822],"['en','fr']",38,"<p>ISO 25424:2009 specifies requirements for the development, validation and routine control of a Low Temperature Steam and Formaldehyde (LTSF) sterilization process for medical devices.</p><p>ISO 2542

42929,IS,,ISO 25457:2008,"Petroleum, petrochemical and natural gas industries — Flare details for general refinery and petrochemical service","Industries du pétrole, de la pétrochimie et du gaz naturel — Détails sur les torches d'usage général dans les raffineries et dans les usines pétrochimiques",2008-12-02,1,['75.180.20'],ISO/TC 67/SC 6,9599,,[84327],"['en','fr']",121,"<p>ISO 25457:2008 specifies requirements and provides guidance for the selection, design, specification, operation and maintenance of flares and related combustion and mechanical components used in pressure relieving and vapour-depressurizing systems for petroleum, petrochemical and natural gas industries.</p><p>Although I

7494,IS,,ISO 2548:1973,"Centrifugal, mixed flow and axial pumps — Code for acceptance tests — Class C","Pompes centrifuges, hélico-centrifuges et hélicoïdes — Code d'essais de réception — Classe C",1973-06-01,1,['23.080'],ISO/TC 115/SC 2,9599,,[17789],"['en','fr']",34,

42951,IS,,ISO 25498:2010,Microbeam analysis — Analytical electron microscopy — Selected-area electron diffraction analysis using a transmission electron microscope,Analyse par microfaisceaux — Microscopie électronique analytique — Analyse par diffraction par sélection d'aire au moyen d'un microscope électronique en transmission,2010-05-17,1,['71.040.50'],ISO/TC 202/SC 3,9599,,[70359],['en'],28,"<p>ISO 25498:2010 specifies the method of selected-area electron diffraction (SAED) analysis using a transmission electron microscope (TEM) to analyse micrometer and sub-micrometer sized areas of thin crystalline specimens. Such specimens can be obtained in the form of thin sections from a variety of

70359,IS,,ISO 25498:2018,Microbeam analysis — Analytical electron microscopy — Selected area electron diffraction analysis using a transmission electron microscope,Analyse par microfaisceaux — Microscopie électronique analytique — Analyse par diffraction par sélection d'aire au moyen d'un microscope électronique en transmission,2018-03-16,2,['71.040.50'],ISO/TC 202/SC 3,9599,[42951],[87733],['en'],38,"<p>ISO 25498:2018 specifies the method of selected area electron diffraction (SAED) analysis using a transmission electron microscope (TEM) to analyse thin crystalline specimens. This document applies to test areas of micrometres and sub-micrometres in size. The minimum diameter of the selected

4153,IS,,ISO 255:1981,Pulleys for classical and narrow V-belts — Geometrical inspection of grooves,Poulies pour courroies trapézoïdales classiques et étroites — Vérification géométrique des gorges,1981-08-01,1,['21.220.10'],ISO/TC 41,9599,,[4154],"['en','fr']",4,

4154,IS,,ISO 255:1990,Belt drives — Pulleys for V-belts (system based on datum width) — Geometrical inspection of grooves,Transmissions par courroies — Poulies à gorges pour courroies trapézoïdales (système basé sur la largeur de référence) — Contrôle géométrique des gorges,1990-11-08,2,['21.220.10'],ISO/TC 41/SC 1,9599,[4153],[84167],"['en','fr']",7,<p>Specifies the methods of checking the regularity of the grooves and pulleys for V-belts. The grooved pulleys may be designed for use with classical or narrow V-belts. The groove details shall be specified by the dimensions shown in the figures 1 to 10.</p>

7498,IS,,ISO 2551:1981,Machine-made textile floor coverings — Determination of dimensional changes due to the effects of varied water and heat conditions,Revêtements de sol textiles fabriqués à la machine — Détermination de la variation des dimensions due à diverses conditions de mouillage et de chaleur,1981-12-01,1,['97.150'],ISO/TC 219,9599,,"[71189,33294]","['en','fr']",2,

42964,IS,,ISO 25518:2009,Single-use rubber gloves for general applications — Specification,"Gants en caoutchouc à usages généraux, non réutilisables — Spécifications",2009-09-08,1,['83.140.99'],ISO/TC 45/SC 4,9599,,[80473],"['en','ru']",6,"<p>ISO 25518:2009 specifies the physical requirements and methods of sampling and testing for single-use rubber gloves, made from natural rubber latex, synthetic rubber latex or rubber solution, intended for general applications.</p><p>It does not cover the safe and proper usage of the gloves.</p>"

7499,IS,,ISO 2553:1974,Welds — Symbolic representation on drawings,Soudures — Représentation symbolique sur les dessins,1974-08-01,1,"['01.100.20','25.160.40']",ISO/TC 44,9599,,"[7500,7501]","['en','fr']",26,

7500,IS,,ISO 2553:1984,Welds — Symbolic representation on drawings,Soudures — Représentations symboliques sur les dessins,1984-12-01,2,"['01.100.20','25.160.40']",ISO/TC 44/SC 7,9599,[7499],[7501],"['en','fr']",26,

7501,IS,,ISO 2553:1992,"Welded, brazed and soldered joints — Symbolic representation on drawings",Joints soudés et brasés — Représentations symboliques sur les dessins,1992-10-15,3,"['01.100.20','25.160.40']",ISO/TC 44/SC 7,9599,"[7500,7499]","[42192,33035]","['en','fr']",50,"<p>ISO 2553:1992 prescribes the rules to be applied for the symbolic representation of welded, brazed and soldered joints on drawings.</p>"

42192,IS,,ISO 2553:2013,Welding and allied processes — Symbolic representation on drawings — Welded joints,Soudage et techniques connexes — Représentations symboliques sur les dessins — Joints soudés,2013-12-13,4,"['01.100.20','25.160.40']",ISO/TC 44/SC 7,9599,[7501],[72740],"['en','fr']",54,"<p>ISO 2553:2013 defines the rules to be applied for symbolic representation of welded joints on technical drawings. This may include information about the geometry, manufacture, quality and testing of the welds. The principles of this standard may also be applied to soldered and brazed joints.</p><p>It is recognized that there are two different approaches in the global market to designate the arrow sid

35886,IS,,ISO 25539-1:2003,Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses,Implants cardiovasculaires — Dispositifs endovasculaires — Partie 1: Prothèses endovasculaires,2003-03-12,1,['11.040.40'],ISO/TC 150/SC 2,9599,,"[66925,54975]","['en','fr']",42,"<p>ISO 25539-1:2003 specifies requirements for endovascular prostheses, based upon current medical knowledge. With regard to safety, it gives requirements for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization packaging and information supplied by the manufacturer. It should be considered as a supplement to ISO 14630, which specifies general requirements for the

39203,IS,Amd,ISO 25539-1:2003/Amd 1:2005,Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses — Amendment 1: Test methods,Implants cardiovasculaires — Dispositifs endovasculaires — Partie 1: Prothèses endovasculaires — Amendement 1: Méthodes d'essai,2005-08-03,1,['11.040.40'],ISO/TC 150/SC 2,9599,,"[66925,54975]","['en','fr']",45,

35887,IS,,ISO 25539-2:2008,Cardiovascular implants — Endovascular devices — Part 2: Vascular stents,Implants cardiovasculaires — Dispositifs endovasculaires — Partie 2: Stents vasculaires,2008-08-26,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[60604],"['en','fr']",93,"<p>ISO 25539-2:2008 specifies requirements for vascular stents, based upon current medical knowledge. With regard to safety, it gives requirements for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization packaging and information supplied by the manufacturer. It should be considered as a supplement to ISO 14630, which specifies general requirements for the performance of non-active surgi

60604,IS,,ISO 25539-2:2012,Cardiovascular implants — Endovascular devices — Part 2: Vascular stents,Implants cardiovasculaires — Dispositifs endovasculaires — Partie 2: Endoprothèses vasculaires,2012-12-05,2,['11.040.40'],ISO/TC 150/SC 2,9599,[35887],[69835],"['en','fr']",92,

35888,IS,,ISO 25539-3:2011,Cardiovascular implants — Endovascular devices — Part 3: Vena cava filters,Implants cardiovasculaires — Dispositifs endovasculaires — Partie 3: Filtres caves,2011-11-25,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[80225],"['en','fr']",93,"<p>ISO 25539-3:2011 specifies requirements for vena cava filters, based upon current medical knowledge. With regard to safety, it gives requirements for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization, packaging and information supplied by the manufacturer. ISO 25539-3:2011 supplements ISO 14630, which specifies general requirements for the performance of non-active surgical implants.<

7502,IS,,ISO 2554:1974,Plastics — Unsaturated polyester resins — Determination of hydroxyl value,Plastiques — Résines de polyesters non saturés — Détermination de l'indice d'hydroxyle,1974-06-01,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[27071],"['en','fr']",2,

7503,IS,,ISO 2555:1974,Resins in the liquid state or as emulsions or dispersions — Determination of Brookfield RV viscosity,Résines à l'état liquide ou en émulsions ou dispersions — Détermination de la viscosité Brookfield RV,1974-06-01,1,['83.080.01'],ISO/TC 61,9599,,[7504],['en'],6,

7504,IS,,ISO 2555:1989,Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method,Plastiques — Résines à l'état liquide ou en émulsions ou dispersions — Détermination de la viscosité apparente selon le Procédé Brookfield,1989-01-26,2,['83.080.01'],ISO/TC 61/SC 5,9599,[7503],[70023],"['en','fr']",7,"<p>Specification of a method for determining an apparent viscosity of resins in a liquid state, using one of the types of rotational viskosimeter described in this standard. A spindle or disc is driven at constant rotational frequency in the product being studied. The resistance exerted by the fluid on the spindle, which

7506,IS,,ISO 2556:1974,Plastics — Determination of the gas transmission rate of films and thin sheets under atmospheric pressure — Manometric method,"Matières plastiques — Détermination du coefficient de transmission d'un gaz par les feuilles et plaques minces, sous pression atmosphérique — Méthode manométrique",1974-06-01,1,['83.140.10'],ISO/TC 61/SC 5,9599,[7505],[26823],"['en','fr']",6,"<p>Specification of the methodand of two types of suitable test apparatus. The plastic test specimen separates two chambers, the one contains the test gas at atmospheric pressure, the other of known initial volume has the air pumped out until the pressure is practically zero. The quantity of gas which pass

7508,IS,,ISO 2557-1:1976,Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injection moulding and compression moulding),Plastiques — Matières à mouler thermoplastiques amorphes — Préparation d'éprouvettes à niveau défini de retrait — Partie 1: Éprouvettes sous forme de barreaux parallélépipédiques (Moulage par injection et moulage par compression),1976-04-01,1,['83.080.20'],ISO/TC 61,9599,,[7509],['en'],5,

7510,IS,,ISO 2557-2:1979,Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 2: Test specimens in the form of rectangular plates (Injection moulding),Plastiques — Matières à mouler thermoplastiques amorphes — Préparation d'éprouvettes à niveau défini de retrait — Partie 2: Éprouvettes sous forme de plaques rectangulaires (Moulage par injection),1979-11-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[7511],"['en','fr']",4,

7511,IS,,ISO 2557-2:1986,Plastics — Amorphous thermoplastics — Preparation of test specimens with a specified reversion — Part 2: Plates,Plastiques — Thermoplastiques amorphes — Préparation des éprouvettes à niveau de retrait spécifié — Partie 2: Plaques,1986-05-22,2,['83.080.20'],ISO/TC 61/SC 9,9599,[7510],[25187],"['en','fr']",4,<p>Specifies the procedure for the preparation of injection moulded test specimens in the form of rectangular plates (80 mm x 50 mm x 4 mm) with predominantly monoaxial orientation. Bars cut from the plate in different directions may serve as test specimens for the determination of the dependence of mechanical strength upon the degree and direction of the predomina

43005,IS,,ISO 25577:2008,Information and documentation — MarcXchange,Information et documentation — MarcXchange,2008-11-25,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[62878],"['en','fr']",15,"<p>ISO 25577:2008 specifies the requirements for a generalized XML-based exchange format for bibliographic records as well as other types of metadata.</p><p>ISO 25577:2008 does not define the length or the content of individual records and does not assign any meaning to tags, indicators, or identifiers, these specifications being the functions of an implementation format.</p><p>ISO 25577:2008 describes a generalized structure, a framework designed primarily for communication between data processing systems, b

7512,IS,,ISO 2558:1974,Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene,Mats de verre textile à fils coupés pour renforcement des matières plastiques — Détermination du temps de dissolution du liant dans le styrène,1974-06-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[55463],"['en','fr']",3,<p>Specification of the method and the apparatus for determination of the solubility of binders in chopped strand mats in styren. Vertical suspension of a test specimen in pure styren with application of an arbitrary tensile load to its lower end. The time taken to break the bond between the strands of the mat shall be recorded. Be

7513,IS,,ISO 2559:1980,Textile glass — Mats (made from chopped or continuous strands) — Basis for a specification,"Verre textile — Mats (constitués de fils de base, coupés ou non) — Base de spécification",1980-09-01,2,['59.100.10'],ISO/TC 61/SC 13,9599,,[7514],"['en','fr']",5,

7514,IS,,ISO 2559:1991,Textile glass — Mats (made from chopped or continuous strands) — Basis for a specification,"Verre textile — Mats (constitués de fils de base, coupés ou non) — Base de spécification",1991-07-11,3,['59.100.10'],ISO/TC 61/SC 13,9599,[7513],[28175],"['en','fr']",6,

28175,IS,,ISO 2559:2000,Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications,"Verre textile — Mats (constitués de fils de base, coupés ou non) — Désignation et base de spécifications",2000-10-26,4,['59.100.10'],ISO/TC 61/SC 13,9599,[7514],[59250],"['en','fr']",7,

7515,IS,,ISO 2560:1973,Covered electrodes for manual arc welding of mild steel and low alloy steel — Code of symbols for identification,Électrodes enrobées pour le soudage manuel à l'arc des aciers doux et des aciers faiblement alliés — Code de symbolisation pour l'identification,1973-03-01,1,['25.160.20'],ISO/TC 44,9599,,[35626],"['en','fr']",7,"<p>Specifies a code for the identification of electrodes by means of symbols related to covering composition and to weld metal characteristics. The purpose of this codification is to facilitate international understanding among weldors, welding technicians, ets., by specifying electrodes according to certain comparable rules.</p>"

35626,IS,,ISO 2560:2002,Welding consumables — Covered electrodes for manual metal arc welding of non-alloy and fine grain steels — Classification,Produits consommables pour le soudage — Électrodes enrobées pour le soudage manuel à l'arc des aciers non alliés et des aciers à grains fins — Classification,2002-10-28,2,['25.160.20'],ISO/TC 44/SC 3,9599,[7515],[45947],"['en','fr']",28,"<p>ISO 2560 specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of non-alloy and fine grain steels with a minimum yield strength of up to 500 N/mm² or a minimum tensile stre

45947,IS,,ISO 2560:2009,Welding consumables — Covered electrodes for manual metal arc welding of non-alloy and fine grain steels — Classification,Produits consommables pour le soudage — Électrodes enrobées pour le soudage manuel à l'arc des aciers non alliés et des aciers à grains fins — Classification,2009-10-13,3,['25.160.20'],ISO/TC 44/SC 3,9599,[35626],[79320],"['en','fr','ru']",29,"<p>ISO 2560:2009 specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of non-alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile streng

7518,IS,,ISO 2561:1974,Plastics — Determination of residual styrene monomer in polystyrene by gas chromatography,Matières plastiques — Détermination du styrène monomère résiduel dans le polystyrène par chromatographie en phase gazeuse,1974-08-01,1,['83.080.20'],ISO/TC 61/SC 5,9599,,[34833],"['en','fr']",3,<p>The specified method is applicable both to styrene homopolymers and to butadiene modified polystyrene. It may be used also for the simultaneous determination of other volatile aromatic hydrocarbons in polystyrene. Dissolution of the polymer sample in chloroform or dichloromethane. Precipitation of the polymer by the addition of methanol and injection of a small volume of the remaining so

34833,IS,,ISO 2561:2006,Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography,Plastiques — Détermination du styrène monomère résiduel dans le polystyrène (PS) et le polystyrène résistant au choc (PS-I) par chromatographie en phase gazeuse,2006-03-06,2,['83.080.20'],ISO/TC 61/SC 9,9599,[7518],[55457],['en'],11,<p>ISO 2561:2006 specifies a method for the determination of the residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography. It may also be used for the simultaneous determination of other volatile aromatic hydrocarbons in PS and PS-I.</p>

55457,IS,,ISO 2561:2012,Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography,Plastiques — Détermination du styrène monomère résiduel dans le polystyrène (PS) et le polystyrène résistant au choc (PS-I) par chromatographie en phase gazeuse,2012-11-09,3,['83.080.20'],ISO/TC 61/SC 9,9599,[34833],[81933],"['en','ru']",16,<p>ISO 2561:2012 specifies a method for the determination of the residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography. It may also be used for the simultaneous determination of other volatile aromatic hydrocarbons in PS and PS-I.</p>

43037,IS,,ISO 25619-1:2008,Geosynthetics — Determination of compression behaviour — Part 1: Compressive creep properties,Géosynthétiques — Détermination du comportement en compression — Partie 1: Propriétés de fluage en compression,2008-12-03,1,['59.080.70'],ISO/TC 221,9599,,[74355],"['en','fr']",20,<p>ISO 25619-1:2008 specifies index test methods for determining the compressive creep properties of geosynthetic products. The test specimens are subjected either to normal compressive loading or to a combination of normal compressive loading and shear loading.</p>

43038,IS,,ISO 25619-2:2008,Geosynthetics — Determination of compression behaviour — Part 2: Determination of short-term compression behaviour,Géosynthétiques — Détermination du comportement en compression — Partie 2: Détermination du comportement à la compression à court terme,2008-12-03,1,['59.080.70'],ISO/TC 221,9599,,[65540],"['en','fr']",7,"<p>ISO 25619-2:2008 specifies an index test method for determining the short-term compressive behaviour of geosynthetics. It can be used to determine the deformation behaviour under short-term compressive stress, e.g. after exposure to stress, liquids or light.</p><p>ISO 25619-2:2008 can be used for quality control purposes. It is not intended to be u

7522,IS,,ISO 2563:1974,Aircraft ducting and piping — Profile dimensions for flanges of V-band couplings,Canalisations et tuyauteries à bord des aéronefs — Dimensions d'encombrement des brides à section en V pour raccords,1974-11-01,1,['49.080'],ISO/TC 20/SC 10,9599,,"[1126,51007]","['en','fr']",1,<p>The profile dimensions of a mating pair of flanges shall comply with the figure given.</p>

43909,IS,,ISO 25639-1:2008,"Exhibitions, shows, fairs and conventions — Part 1: Vocabulary","Terminologie du secteur des foires, salons et congrès ou manifestations commerciales — Partie 1: Vocabulaire",2008-11-05,1,"['03.100.01','01.040.03']",ISO/TC 228,9599,,[83723],"['en','fr']",14,"<p>ISO 25639-1:2008 specifies terms and definitions that are commonly used in the exhibition industry. They are grouped into the following four categories:</p><ul><li> individual and entity, which lists and classifies the various types of people involved in the exhibition industry,</li><li> type of event, which defines the different types of exhibitions and their related meetings,</li><li> ph

61400,IS,,ISO 25649-1:2017,"Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods","Articles de loisirs flottants à utiliser sur ou dans l'eau — Partie 1: Classification, matériaux, exigences et méthodes d'essai générales",2017-08-31,1,['97.220.40'],ISO/TC 83,9599,,[79651],"['en','fr']",29,"<p>ISO 25649-1:2017 specifies safety requirements and test methods related to materials, safety, performance for classified floating leisure articles for use on and in water in accordance with Clause 4 (see Table 1).</p><p>ISO 25649-1:2017 is only applicable with ISO 25649‑2 and the relevant specific parts (ISO 25649‑3 to ISO 25649

61401,IS,,ISO 25649-2:2017,Floating leisure articles for use on and in the water — Part 2: Consumer information,Articles de loisirs flottants à utiliser sur ou dans l'eau — Partie 2: Informations aux consommateurs,2017-08-31,1,"['97.020','97.220.40']",ISO/TC 83,9599,,[79652],"['en','fr']",22,<p>ISO 25649-2:2017 specifies consumer information for classified floating leisure articles for use on and in water according to ISO 25649‑1.</p><p>ISO 25649-2:2017 is applicable with ISO 25649‑1 and the relevant specific parts (ISO 25649‑3 to ISO 25649‑7).</p><p>NOTE 1 Specific safety requirements are specified in the specific parts ISO 25649‑3 to ISO 25649‑7.</p><p>NOTE 2 The specific parts can i

61402,IS,,ISO 25649-3:2017,Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices,Articles de loisirs flottants à utiliser sur ou dans l'eau — Partie 3: Exigences de sécurité et méthodes d'essai complémentaire propre aux dispositifs de Classe A,2017-08-31,1,['97.220.40'],ISO/TC 83,9599,,[79653],"['en','fr']",15,"<p>ISO 25649-3:2017 is applicable for CLASS A classified floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.</p><p>ISO 25649-3:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2.</p><p>N

61403,IS,,ISO 25649-4:2017,Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices,Articles de loisirs flottants à utiliser sur ou dans l'eau — Partie 4: Exigences de sécurité et méthodes d'essai complémentaires propres aux dispositifs de Classe B,2017-08-31,1,['97.220.40'],ISO/TC 83,9599,,[79654],"['en','fr']",24,"<p>ISO 25649-4:2017 specifies safety requirements and test methods related to materials, safety, performance and consumer information for classified floating leisure articles for use on and in the water according to ISO 25649‑1.</p><p>ISO 25649-4:2017 is to be applied with ISO 25649‑1 and ISO 2564

61404,IS,,ISO 25649-5:2017,Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices,Articles de loisirs flottants à utiliser sur ou dans l'eau — Partie 5: Exigences de sécurité et méthodes d'essai complémentaires propres aux dispositifs de Classe C,2017-08-31,1,['97.220.40'],ISO/TC 83,9599,,[79655],"['en','fr']",19,"<p>ISO 25649-5:2017 is applicable for CLASS C classified floating leisure articles for use on and in water according to ISO 25649‑1 regardless of whether the buoyancy is achieved by inflation or inherent buoyant material.</p><p>ISO 25649-5:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2.</p

61405,IS,,ISO 25649-6:2017,Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices,Articles des loisirs flottants à utiliser sur ou dans l'eau — Partie 6: Exigences de sécurité et méthodes d'essai complémentaires propres aux dispositifs de Classe D,2017-08-31,1,['97.220.40'],ISO/TC 83,9599,,[79656],"['en','fr']",18,"<p>ISO 25649-6:2017 is applicable for Class D floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.</p><p>ISO 25649-6:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2.</p><p>NOTE 1

61406,IS,,ISO 25649-7:2017,Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices,Articles de loisirs flottants à utiliser sur ou dans l'eau — Partie 7: Exigences de sécurité et méthodes d'essai complémentaires propres aux dispositifs de Classe E,2017-08-31,1,['97.220.40'],ISO/TC 83,9599,,[79657],"['en','fr']",25,"<p>ISO 25649-7:2017 is applicable for Class E floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.</p><p>ISO 25649-7:2017 is applicable with ISO 25649‑1 and ISO 25649‑2.</p><p>Class E devic

7523,IS,,ISO 2566-1:1973,Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels,Acier — Conversion des valeurs d'allongement — Partie 1: Aciers au carbone et aciers faiblement alliés,1973-07-01,1,['77.040.10'],ISO/TC 17,9599,,[7524],"['en','fr']",22,

7524,IS,,ISO 2566-1:1984,Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels,Acier — Conversion des valeurs d'allongement — Partie 1: Aciers au carbone et aciers faiblement alliés,1984-07-01,2,['77.040.10'],ISO/TC 17/SC 20,9599,[7523],[81245],"['en','fr']",28,"<p>Specifies a method of converting room temperature percentage elongations after fracture obtained on various proportional and non-proportional gauge lengths to other gauge lengths. The conversions are not applicable to cold reduced steels, quenched and tempered steels and austenitic steels, or where certain tensile strength ranges and dimensions are exceeded.</p>"

7525,IS,,ISO 2566-2:1984,Steel — Conversion of elongation values — Part 2: Austenitic steels,Acier — Conversion des valeurs d'allongement — Partie 2: Aciers austénitiques,1984-08-01,1,['77.040.10'],ISO/TC 17/SC 20,9599,,[81246],"['en','fr']",28,"<p>Specifies a method of converting room temperature percentage elongations after fracture obtained on various proportional and non-proportional gauge lengths to other gauge lengths. The conversions are not applicable to cold reduced steels, quenched and tempered steels and non-austenitic steels, or where certain tensile strength ranges and dimensions are exceeded.</p>"

7526,IS,,ISO 2568:1973,Hand- and machine-operated circular screwing dies and hand-operated die stocks,"Filières rondes de filetage, à main et à machine, et porte-filière à main",1973-02-01,1,['25.100.50'],ISO/TC 29,9599,,[7527],"['en','fr']",10,

7528,IS,Amd,ISO 2568:1973/Amd 1:1977,Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 1,"Filières rondes de filetage, à main et à machine, et porte-filière à main — Amendement 1",1977-12-01,1,['25.100.50'],ISO/TC 29,9599,,[7527],['en'],2,

7529,IS,Amd,ISO 2568:1973/Amd 2:1983,Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 2,"Filières rondes de filetage, à main et à machine, et porte-filière à main — Amendement 2",1983-05-01,1,['25.100.50'],ISO/TC 29,9599,,[7527],['en'],4,

7530,IS,,ISO 2569:1973,Cork stoppers — Classification and characteristics,Bouchons de liège — Classification et caractéristiques générales,1973-07-01,1,"['55.100','79.100']",ISO/TC 87,9599,,"[7531,7532]","['en','fr']",2,

7531,IS,,ISO 2569:1985,Cork stoppers — Types and general characteristics,Bouchons de liège — Types et caractéristiques générales,1985-10-31,2,"['79.100','55.100']",ISO/TC 87,9599,[7530],[7532],"['en','fr']",2,

4156,IS,,ISO 257:1976,Pest control chemicals and plant growth regulators — Principles for the selection of common names,Pesticides et produits phytopharmaceutiques — Principes pour le choix des noms communs,1976-11-01,1,['65.100.01'],ISO/TC 81,9599,,[4157],"['en','fr']",2,

4157,IS,,ISO 257:1988,Pesticides and other agrochemicals — Principles for the selection of common names,Produits phytosanitaires et assimilés — Principes pour le choix des noms communs,1988-11-03,2,['65.100.01'],ISO/TC 81,9599,[4156],[4158],"['en','fr']",8,"<p>Constitutes a complete revision of the 1976 edition. A table indicates the types of compound, recommended syllables and their positions in name. The recommandations are based on the chemical structures of the compounds. An extensive normative annex specifies procedure and rules of denomination.</p>"

4158,IS,,ISO 257:2004,Pesticides and other agrochemicals — Principles for the selection of common names,Produits phytosanitaires et assimilés — Principes pour le choix des noms communs,2004-06-23,3,['65.100.01'],ISO/TC 81,9599,[4157],[67998],['en'],17,<p>ISO 257:2004 gives principles for creating common names for pesticides and other agrochemicals. These principles are defined for the guidance of proposers of such common names.</p><p>The procedure for the establishment of common names is also given.</p>

7535,IS,,ISO 2574:1974,Aircraft — Electrical cables — Identification,Aéronefs — Câbles électriques — Marquage,1974-11-01,1,['49.060'],ISO/TC 20/SC 1,9599,,[7536],"['en','fr']",1,

43203,IS,,ISO 25745-1:2012,"Energy performance of lifts, escalators and moving walks — Part 1: Energy measurement and verification","Performance énergétique des ascenseurs, escaliers mécaniques et trottoirs roulants — Partie 1: Mesurage de l'énergie et vérification",2012-10-01,1,['91.140.90'],ISO/TC 178,9599,,[78245],"['en','fr']",15,"<p>ISO 25745-1:2012 specifies: a) methods of measuring actual energy consumption of lifts, escalators and moving walks on a single unit basis; b) methods of carrying out periodic energy verification checks on lifts, escalators and moving walks in operation.</p><p>ISO 25745-1:2012 only considers the energy performance during the operational portion of the life c

7537,IS,,ISO 2575:1982,"Road vehicles — Symbols for controls, indicators and tell-tales","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins",1982-11-01,4,"['01.080.20','43.040.30']",ISO/TC 22,9599,"[7540,7541,7542]",[22722],"['en','fr']",6,

7539,IS,Amd,ISO 2575:1982/Amd 1:1994,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins — Amendement 1",1994-05-19,4,"['01.080.20','43.040.30']",ISO/TC 22,9599,,[22722],"['en','fr']",2,

22722,IS,,ISO 2575:1995,"Road vehicles — Symbols for controls, indicators and tell-tales","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins",1995-11-23,5,"['01.080.20','43.040.30']",ISO/TC 22,9599,"[7537,7539]",[31253],"['en','fr']",14,

27927,IS,Amd,ISO 2575:1995/Amd 1:1998,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1: Child seat prohibition","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins — Amendement 1: Interdiction de siège enfant",1998-10-15,5,"['01.080.20','43.040.30']",ISO/TC 22,9599,,[31253],"['en','fr']",2,

31253,IS,,ISO 2575:2000,"Road vehicles — Symbols for controls, indicators and tell-tales","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins",2000-04-06,6,"['01.080.20','43.040.30']",ISO/TC 22,9599,"[27927,26650,26648,22722,26649]",[39704],"['en','fr']",41,

31361,IS,Amd,ISO 2575:2000/Amd 1:2001,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins — Amendement 1",2001-03-22,6,"['01.080.20','43.040.30']",ISO/TC 22,9599,"[32491,32486]",[39704],"['en','fr']",12,

33021,IS,Amd,ISO 2575:2000/Amd 4:2001,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 4","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins — Amendement 4",2001-08-02,6,"['01.080.20','43.040.30']",ISO/TC 22,9599,,[39704],['en'],4,

34429,IS,Cor,ISO 2575:2000/Cor 1:2001,"Road vehicles — Symbols for controls, indicators and tell-tales — Technical Corrigendum 1","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins — Rectificatif technique 1",2001-03-08,6,"['01.080.20','43.040.30']",ISO/TC 22,9599,,[39704],['en'],1,

39704,IS,,ISO 2575:2004,"Road vehicles — Symbols for controls, indicators and tell-tales","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins",2004-05-28,7,"['01.080.20','43.040.30']",ISO/TC 22,9599,"[31253,34429,31361,33021]",[54513],"['en','fr']",59,"<p>ISO 2575:2004 establishes symbols (i.e. conventional signs) for use on controls, indicators and telltales applying to passenger cars, light and heavy commercial vehicles and buses, to ensure identification and facilitate use. It also indicates the colours of possible optical tell-tales, which inform the driver of either correct operation or malfunctioning of the related devices.</p>"

39705,IS,Amd,ISO 2575:2004/Amd 1:2005,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins — Amendement 1",2005-04-20,7,"['01.080.20','43.040.30']",ISO/TC 22,9599,,[54513],"['en','fr']",4,

40672,IS,Amd,ISO 2575:2004/Amd 2:2006,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 2","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins — Amendement 2",2006-04-20,7,"['01.080.20','43.040.30']",ISO/TC 22,9599,,[54513],"['en','fr']",5,

51258,IS,Amd,ISO 2575:2004/Amd 3:2008,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 3","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins — Amendement 3",2008-10-09,7,"['01.080.20','43.040.30']",ISO/TC 22,9599,[45428],[54513],"['en','fr']",9,

43953,IS,Amd,ISO 2575:2004/Amd 4:2009,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 4","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins — Amendement 4",2009-02-10,7,"['01.080.20','43.040.30']",ISO/TC 22,9599,,[54513],"['en','fr']",1,