Withdrawn and superseded ISO standards — page 61 of 246

34043,IS,,ISO 17191:2004,Urine-absorbing aids for incontinence — Measurement of airborne respirable polyacrylate superabsorbent materials — Determination of dust in collection cassettes by sodium atomic absorption spectrometry,Aides pour absorption d'urine — Dosage des particules respirables de matériaux superabsorbants de polyacrylate en suspension dans l'air — Dosage de la poussière dans des cassettes par spectrométrie à absorption atomique du sodium,2004-01-23,1,['11.180.20'],ISO/TC 173/SC 3,9599,,"[87929,54808]",['en'],9,"<p>ISO 17191:2004 specifies a method for the determination of polyacrylate (PA) superabsorbent powders in airborne dust by measurement of sodium (Na) by atomic absorpti

38281,IS,,ISO 17194:2007,Structural adhesives — A standard database of properties,Adhésifs structuraux — Base de données des caractéristiques,2007-03-09,1,['83.180'],ISO/TC 61/SC 11,9599,,[82748],"['en','fr']",6,<p>ISO 17194:2007 specifies a set of basic properties commonly required for the selection and use of structural adhesives in different applications. ISO standard test methods and test conditions are also recommended for the measurement of these data to facilitate traceability of recorded values.</p>

6340,IS,,ISO 1720:1974,Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 1 1/2 to 2 in (38 to 51 mm),Forage des roches — Matériels pour forage percutant de longs trous — Équipements à filetage corde 1 1/2 à 2 in (38 à 51 mm),1974-07-01,1,['73.100.30'],ISO/TC 82,9599,,"[18240,18238]","['en','fr']",6,

30576,IS,,ISO 17201-1:2005,Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement,Acoustique — Bruit des stands de tir — Partie 1: Mesurage de l'énergie sonore en sortie de bouche,2005-08-05,1,"['95.020','97.220.10','17.140.20']",ISO/TC 43/SC 1,9599,,[66940],"['en','fr']",41,"<p>ISO 17201-1:2005 specifies a method to determine the acoustic source energy of the muzzle blast for calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent. It is applicable at distances where peak pressures less than 1 kPa (equivalent to a peak sound pressure level of 154 dB) are observed. The source energy, directivity of the source and their spectral

54067,IS,Cor,ISO 17201-1:2005/Cor 1:2009,Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement — Technical Corrigendum 1,Acoustique — Bruit des stands de tir — Partie 1: Mesurage de l'énergie sonore en sortie de bouche — Rectificatif technique 1,2009-04-03,1,"['95.020','97.220.10','17.140.20']",ISO/TC 43/SC 1,9599,,[66940],"['en','fr','ru']",1,

30577,IS,,ISO 17201-2:2006,Acoustics — Noise from shooting ranges — Part 2: Estimation of muzzle blast and projectile sound by calculation,Acoustique — Bruit des stands de tir — Partie 2: Estimation de la détonation à la bouche et du bruit du projectile par calcul,2006-06-28,1,"['95.020','97.220.10','17.140.20']",ISO/TC 43/SC 1,9599,,"[56054,81320,74029]","['en','fr']",31,"<p>ISO 17201-2:2006 specifies methods for estimating the acoustic source data of muzzle blast and explosions and the source data of projectile sound on the basis of non-acoustic data for firearms with calibres less than 20 mm and explosions less than 50 g TNT equivalent.</p><p>It addresses those cases where no source measu

42151,IS,,ISO 17201-3:2010,Acoustics — Noise from shooting ranges — Part 3: Guidelines for sound propagation calculations,Acoustique — Bruit des stands de tir — Partie 3: Lignes directrices pour le calcul de la propagation du son,2010-01-18,1,"['95.020','97.220.10','17.140.20']",ISO/TC 43/SC 1,9599,,[69861],"['en','fr']",55,"<p>ISO 17201-3:2010 specifies methods of predicting sound exposure levels of shooting sound for a single shot at a given reception point. Guidelines are given to calculate other acoustic indices from the sound exposure level. The prediction is based on the angular source energy distribution of the muzzle blast as defined in ISO 17201-1 or calculated using values from ISO

30579,IS,,ISO 17201-4:2006,Acoustics — Noise from shooting ranges — Part 4: Prediction of projectile sound,Acoustique — Bruit des stands de tir — Partie 4: Estimation du bruit du projectile,2006-03-23,1,"['95.020','97.220.10','17.140.20']",ISO/TC 43/SC 1,9599,,"[81319,84479]","['en','fr']",19,"<p>ISO 17201-4:2006 provides a computational model for determining the acoustical source level of projectile sound and its one-third-octave-band spectrum, expressed as the sound exposure level for nominal mid-band frequencies from 12,5 Hz to 10 kHz. It also gives guidance on how to use this source level to calculate the sound exposure level at a receiver position.</p><p>ISO 17201-4:2006 is intended for

38283,IS,,ISO 17212:2004,Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding,Adhésifs structuraux — Lignes directrices pour la préparation de surface de métaux et de plastiques avant le collage par adhésif,2004-05-17,1,['83.180'],ISO/TC 61/SC 11,9599,"[23253,23367]",[50596],['en'],27,<p>ISO 17212:2004 provides and describes the usual procedures for the preparation of component surfaces prior to bonding for either laboratory evaluation or the process of construction. It is applicable to metal and plastic surfaces that are commonly encountered.</p>

59547,IS,,ISO 17215-3:2014,Road vehicles — Video communication interface for cameras (VCIC) — Part 3: Camera message dictionary,Véhicules routiers — Interface de communication vidéo pour caméras (ICVC) — Partie 3: Dictionnaire de message de caméra,2014-04-30,1,['43.040.15'],ISO/TC 22/SC 31,9599,,[79623],['en'],46,"<p>ISO 17215-3:2014 specifies the standardized camera messages and data types used by a VCIC camera (OSI Layer 7).</p><p>Applications hosted on ECUs want to communicate with one or more cameras (e.g. 'Ask camera for parameters.'). If the applications can use standardized services supported by the cameras (API layer 7), the development of a vision application should be independent o

61192,IS,,ISO 17223:2014,Plastics — Determination of yellowness index and change in yellowness index,Plastiques — Détermination de l'indice de jaunissement et du changement de l'indice de jaunissement,2014-05-06,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[91100],['en'],9,"<p>ISO 17223:2014 specifies an instrumental method for determining the yellowness index and change in yellowness index on clear, translucent, or opaque plastics.</p>"

59456,IS,,ISO 17225-1:2014,Solid biofuels — Fuel specifications and classes — Part 1: General requirements,Biocombustibles solides — Classes et spécifications des combustibles — Partie 1: Exigences générales,2014-04-28,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[76087],"['en','fr','ru']",56,<p>ISO 17225-1:2014 determines the fuel quality classes and specifications for solid biofuels of raw and processed materials originating from a) forestry and arboriculture; b) agriculture and horticulture; and c) aquaculture.</p><p>Chemically treated material may not include halogenated organic compounds or heavy metals at levels higher than those in typical virgin material values or higher than typical

59457,IS,,ISO 17225-2:2014,Solid biofuels — Fuel specifications and classes — Part 2: Graded wood pellets,Biocombustibles solides — Classes et spécifications des combustibles — Partie 2: Classes de granulés de bois,2014-04-28,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[76088],"['en','fr','ru']",9,<p>ISO 17225-2:2014 determines the fuel quality classes and specifications of graded wood pellets for non-industrial and industrial use.</p>

59458,IS,,ISO 17225-3:2014,Solid biofuels — Fuel specifications and classes — Part 3: Graded wood briquettes,Biocombustibles solides — Classes et spécifications des combustibles — Partie 3: Classes de briquettes de bois,2014-04-28,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[76089],"['en','fr','ru']",6,<p>ISO 17225-3:2014 determines the fuel quality classes and specifications of graded wood briquettes. </p>

59459,IS,,ISO 17225-4:2014,Solid biofuels — Fuel specifications and classes — Part 4: Graded wood chips,Biocombustibles solides — Classes et spécifications des combustibles — Partie 4: Classes de plaquettes de bois,2014-04-28,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[76091],"['en','fr','ru']",8,<p>ISO 17225-4:2014 determines the fuel quality classes and specifications of graded wood chips.</p>

59460,IS,,ISO 17225-5:2014,Solid biofuels — Fuel specifications and classes — Part 5: Graded firewood,Biocombustibles solides — Classes et spécifications des combustibles — Partie 5: Classes de bois de chauffage,2014-04-28,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[76092],"['en','fr','ru']",10,<p>ISO 17225-5:2014 determines the fuel quality classes and specifications of graded firewood.</p>

76092,IS,,ISO 17225-5:2021,Solid biofuels — Fuel specifications and classes — Part 5: Graded firewood,Biocombustibles solides — Classes et spécifications des combustibles — Partie 5: Classes de bois de chauffage,2021-07-05,2,"['27.190','75.160.40']",ISO/TC 238,9599,[59460],[91137],"['en','fr']",12,"<p>This document determines the fuel quality classes and specifications of graded firewood. This document covers only firewood produced from the following raw materials (see ISO 17725‑1:2021, Table 1):</p><p>— 1.1.1 Whole trees without roots;</p><p>— 1.1.3 Stem wood;</p><p>— 1.1.4 Logging residues (thick branches, tops etc.);</p><p>— 1.2.1 Chemically untreated by-products and residues

59461,IS,,ISO 17225-6:2014,Solid biofuels — Fuel specifications and classes — Part 6: Graded non-woody pellets,Biocombustibles solides — Classes et spécifications des combustibles — Partie 6: Classes de granulés d'origine agricole,2014-04-28,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[76093],"['en','fr','ru']",7,<p>ISO 17225-6:2014 determines the fuel quality classes and specifications of graded non-woody pellets.</p>

59462,IS,,ISO 17225-7:2014,Solid biofuels — Fuel specifications and classes — Part 7: Graded non-woody briquettes,Biocombustibles solides — Classes et spécifications des combustibles — Partie 7: Classes de briquettes d'origine agricole,2014-04-28,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[76094],"['en','fr','ru']",6,<p>ISO 17225-7:2014 determines the fuel quality classes and specifications of graded non-woody briquettes.</p>

43476,IS,,ISO 17226-1:2008,Leather — Chemical determination of formaldehyde content — Part 1: Method using high performance liquid chromatography,Cuir — Dosage chimique du formaldéhyde — Partie 1: Méthode par chromatographie en phase liquide à haute performance,2008-04-23,1,['59.140.30'],IULTCS,9599,[31292],[73708],"['en','fr']",6,<p>ISO 17226-1:2008 specifies a method for the determination of free and released formaldehyde in leathers. This method is based on high performance liquid chromatography (HPLC). It is selective and not sensitive to coloured extracts.</p><p>The formaldehyde content is taken to be the quantity of free-formaldehyde and formaldehyde extracted through hydrolysis cont

73708,IS,,ISO 17226-1:2018,Leather — Chemical determination of formaldehyde content — Part 1: Method using high performance liquid chromatography,Cuir — Dosage chimique du formaldéhyde — Partie 1: Méthode par chromatographie en phase liquide à haute performance,2018-12-21,2,['59.140.30'],IULTCS,9599,[43476],[78128],"['en','fr']",9,"<p>This document specifies a method for the determination of free and released formaldehyde in leathers. This method, based on high performance liquid chromatography (HPLC), is selective and not sensitive to coloured extracts and is intended to be used for precise quantification of formaldehyde.</p><p>The formaldehyde content is taken to be the quantity of free-

43871,IS,,ISO 17226-2:2008,Leather — Chemical determination of formaldehyde content — Part 2: Method using colorimetric analysis,Cuir — Dosage chimique du formaldéhyde — Partie 2: Méthode par analyse colorimétrique,2008-04-23,1,['59.140.30'],IULTCS,9599,[31292],[73709],"['en','fr']",7,<p>ISO 17226-2:2008 specifies a method for the determination of free and released formaldehyde in leathers. This method is based on colorimetric analysis.</p><p>The formaldehyde content is taken to be the quantity of free-formaldehyde and formaldehyde extracted through hydrolysis contained in a water extract from the leather under standard conditions</p><p>This process is not absolutely selective for formalde

53958,IS,Cor,ISO 17226-2:2008/Cor 1:2009,Leather — Chemical determination of formaldehyde content — Part 2: Method using colorimetric analysis — Technical Corrigendum 1,Cuir — Dosage chimique du formaldéhyde — Partie 2: Méthode par analyse colorimétrique — Rectificatif technique 1,2009-04-03,1,['59.140.30'],IULTCS,9599,,[73709],"['en','fr']",1,

31294,IS,,ISO 17228:2005,Leather — Tests for colour fastness — Change in colour with accelerated ageing,Cuir — Essais de solidité des teintures — Changement de couleur avec vieillissement accéléré,2005-07-26,1,['59.140.30'],IULTCS,9599,,[54447],"['en','fr']",7,"<p>Over time, the surface colour of leather and the leather itself change due to ageing and to the action of the surroundings on the leather. The purpose of the various ageing procedures described in ISO 17228:2005 is to obtain an indication of the changes that could occur when leather is exposed to a certain environment for a prolonged time. The test conditions to be used depend on the type of leather and its intended use.</p>" 31295

31295,IS,,ISO 17229:2002,Leather — Physical and mechanical tests — Determination of water vapour absorption,Cuir — Essais physiques et mécaniques — Détermination de l'absorption de vapeur d'eau,2002-12-05,1,['59.140.30'],IULTCS,9599,,[68862],"['en','fr']",3,<p>ISO 17229:2002 specifies a method for determining the water vapour absorption of leather. The method is applicable for all leathers but is particularly relevant for leathers intended for footwear uppers and linings.</p>

31297,IS,,ISO 17231:2006,Leather — Physical and mechanical tests — Determination of water repellency of garment leather,Cuir — Essais physiques et mécaniques — Détermination de la résistance au mouillage superficiel des cuirs pour vêtements,2006-09-14,1,['59.140.30'],IULTCS,9599,,[73373],"['en','fr']",7,<p>ISO 17231:2006 specifies a method for determining the repellency of leather to surface wetting. It is applicable to all leathers intended for use in clothing. The method does not determine the resistance of leather to water penetration.</p>

41473,IS,,ISO 17232:2006,Leather — Physical and mechanical tests — Determination of heat resistance of patent leather,Cuir — Essais physiques et mécaniques — Détermination de la résistance à la chaleur des cuirs vernis,2006-09-14,1,['59.140.30'],IULTCS,9599,,[67104],"['en','fr']",7,<p>ISO 17232:2006 specifies two methods for determining the heat resistance of patent leather. </p><p>Method A makes use of a modified lastometer while Method B uses the 'Zwik' apparatus. Both methods are applicable to patent leathers for all end uses.</p>

67104,IS,,ISO 17232:2017,Leather — Physical and mechanical tests — Determination of heat resistance of patent leather,Cuir — Essais physiques et mécaniques — Détermination de la résistance à la chaleur des cuirs vernis,2017-01-31,2,['59.140.30'],IULTCS,9599,[41473],[90000],"['en','fr']",7,"<p>ISO 17232:2017 specifies two methods for determining the heat resistance of patent leather.</p><p>Method A makes use of a modified lastometer, while Method B uses the 'Zwik' apparatus. Both methods are applicable to patent leathers for all end uses.</p>"

31299,IS,,ISO 17233:2002,Leather — Physical and mechanical tests — Determination of cold crack temperature of surface coatings,Cuir — Essais physiques et mécaniques — Détermination de la température de fissuration à froid des revêtements de la surface,2002-12-05,1,['59.140.30'],IULTCS,9599,,[67102],"['en','fr']",3,<p>ISO 17233:2002 specifies a method for determining the cold crack temperature of surface coatings applied to leather. It is applicable to all leathers which have a surface coating and which can be easily flexed.</p>

50111,IS,,ISO 17234-1:2010,Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 1: Determination of certain aromatic amines derived from azo colorants,Cuir — Essais chimiques pour le dosage de certains colorants azoïques dans les cuirs teints — Partie 1: Dosage de certaines amines aromatiques dérivées des colorants azoïques,2010-02-11,1,['59.140.30'],IULTCS,9599,[31300],[61791],"['en','fr']",9,<p>ISO 17234-1:2010 specifies a method for determining the use of certain azo colorants which may release certain aromatic amines.</p>

61791,IS,,ISO 17234-1:2015,Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 1: Determination of certain aromatic amines derived from azo colorants,Cuir — Essais chimiques pour le dosage de certains colorants azoïques dans les cuirs teints — Partie 1: Dosage de certaines amines aromatiques dérivées des colorants azoïques,2015-03-26,2,['59.140.30'],IULTCS,9599,[50111],[75891],"['en','fr']",15,<p>ISO 17234-1:2015 specifies a method for determining the use of certain azo colorants which can release certain aromatic amines.</p>

75891,IS,,ISO 17234-1:2020,Leather — Chemical tests for the determination of certain azo colourants in dyed leathers — Part 1: Determination of certain aromatic amines derived from azo colourants,Cuir — Essais chimiques pour le dosage de certains colorants azoïques dans les cuirs teints — Partie 1: Dosage de certaines amines aromatiques dérivées des colorants azoïques,2020-08-21,3,['59.140.30'],IULTCS,9599,[61791],[87433],"['en','fr']",23,<p>This document specifies a method for determining the use of certain azo colourants which can release certain aromatic amines.</p>

31301,IS,,ISO 17235:2002,Leather — Physical and mechanical tests — Determination of softness,Cuir — Essais physiques et mécaniques — Détermination de la souplesse,2002-12-05,1,['59.140.30'],IULTCS,9599,,[53734],"['en','fr']",4,"<p>ISO 17235:2002 specifies a non-destructive method for determining the softness of a leather. It is applicable to all non-rigid leathers, e.g. shoe upper leather, upholstery leather, leathergoods leather and apparel leather.</p>"

53734,IS,,ISO 17235:2011,Leather — Physical and mechanical tests — Determination of softness,Cuir — Essais physiques et mécaniques — Détermination de la souplesse,2011-11-29,2,['59.140.30'],IULTCS,9599,[31301],[63873],"['en','fr']",4,"<p>ISO 17235:2011 specifies a non-destructive method for determining the softness of a leather. It is applicable to all non-rigid leathers, e.g. shoe-upper leather, upholstery leather, leather-goods leather and apparel leather</p>"

31302,IS,,ISO 17236:2002,Leather — Physical and mechanical tests — Determination of extension set,Cuir — Essais physiques et mécaniques — Détermination de la déformabilité,2002-12-05,1,['59.140.30'],IULTCS,9599,,[68863],"['en','fr']",3,<p>ISO 17236:2002 specifies a method for determining the extension set of leather. It is intended for use on upholstery leather but is applicable to all flexible leathers.</p>

68863,IS,,ISO 17236:2016,Leather — Physical and mechanical tests — Determination of extension set,Cuir — Essais physiques et mécaniques — Détermination de la déformabilité,2016-02-11,2,['59.140.30'],IULTCS,9599,[31302],[89400],"['en','fr']",3,<p>ISO 17236:2016 specifies a method for determining the extension set of leather. It is intended for use on upholstery leather but is applicable to all flexible leathers.</p>

6343,IS,,ISO 1724:1980,Road vehicles — Electrical connections between towing vehicles and towed vehicles with 6 or 12 V electrical equipment — Type 12 N (normal),Véhicules routiers — Liaisons électriques entre véhicules tracteurs et véhicules remorqués avec équipement électrique 6 ou 12 V — Type 12 N (normal),1980-10-01,2,['43.040.10'],ISO/TC 22,9599,,[6344],"['en','fr']",4,

6344,IS,,ISO 1724:1997,Road vehicles — Electrical connections between towing and towed vehicles with 12 V systems — 7 pole connector type 12 N (normal),Véhicules routiers — Connexions électriques entre véhicule tracteur et véhicule tracté équipés d'un circuit électrique de 12 V — Connecteur à 7 contacts de type 12 N (normal),1997-10-23,3,['43.040.10'],ISO/TC 22,9599,[6343],[30212],"['en','fr']",7,

59472,IS,,ISO 17244:2015,Water quality — Determination of the toxicity of water samples on the embryo-larval development of Japanese oyster (Crassostrea gigas) and mussel (Mytilus edulis or Mytilus galloprovincialis),Qualité de l'eau — Détermination de la toxicité d'échantillons aqueux sur le développement embryo-larvaire de l'huître creuse (Crassostrea gigas) et de la moule (Mytilus edulis ou Mytilus galloprovincialis),2015-09-17,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[84710],"['en','fr']",24,"<p>ISO 17244:2015 specifies a method for determining the effects of chemical and aqueous samples on the embryo-larval development of marine bivalves. It allows the determination of the concentration le

37220,IS,,ISO 17246:2005,Coal — Proximate analysis,Charbon — Analyse immédiate,2005-05-06,1,['73.040'],ISO/TC 27/SC 5,9599,,[55946],['en'],3,<p>ISO 17246:2005 establishes a practice for the proximate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals.</p>

44504,IS,Cor,ISO 17246:2005/Cor 1:2006,Coal — Proximate analysis — Technical Corrigendum 1,Charbon — Analyse immédiate — Rectificatif technique 1,2006-06-28,1,['73.040'],ISO/TC 27/SC 5,9599,,[55946],['en'],1,

55946,IS,,ISO 17246:2010,Coal — Proximate analysis,Charbon — Analyse immédiate,2010-06-04,2,['73.040'],ISO/TC 27/SC 5,9599,"[44504,37220]",[86978],['en'],5,<p>ISO 17246:2010 establishes a practice for the proximate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals.</p>

37221,IS,,ISO 17247:2005,Coal — Ultimate analysis,Charbon — Analyse élémentaire,2005-05-09,1,['73.040'],ISO/TC 27/SC 5,9599,,[63442],['en'],4,<p>ISO 17247:2005 establishes a practice for the ultimate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals.</p>

44505,IS,Cor,ISO 17247:2005/Cor 1:2006,Coal — Ultimate analysis — Technical Corrigendum 1,Charbon — Analyse élémentaire — Rectificatif technique 1,2006-06-28,1,['73.040'],ISO/TC 27/SC 5,9599,,[63442],['en'],1,

63442,IS,,ISO 17247:2013,Coal — Ultimate analysis,Charbon — Analyse élémentaire,2013-07-03,2,['73.040'],ISO/TC 27/SC 5,9599,"[44505,37221]",[79740],"['en','ru']",5,<p>ISO 17247:2013 establishes a practice for the ultimate analysis of coal and is intended for general utilization by the coal industry to provide a basis for comparison of coals.</p>

32935,IS,,ISO 17249:2004,Safety footwear with resistance to chain saw cutting,Chaussures de sécurité résistantes aux coupures de scie à chaîne,2004-09-15,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[55768],"['en','fr']",14,<p>ISO 17249:2004 specifies requirements for safety footwear with resistance to chain saw cutting.</p>

43000,IS,Amd,ISO 17249:2004/Amd 1:2007,Safety footwear with resistance to chain saw cutting — Amendment 1,Chaussures de sécurité résistantes aux coupures de scie à chaîne — Amendement 1,2007-01-11,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[55768],"['en','fr']",1,

60977,IS,,ISO 17257:2013,Rubber — Identification of polymers — Pyrolytic gas-chromatographic method using mass-spectrometric detection,Caoutchouc — Identification des polymères — Méthode par pyrolyse et chromatographie en phase gazeuse avec détection par spectrométrie de masse,2013-12-11,1,['83.060'],ISO/TC 45/SC 2,9599,,[77434],"['en','fr']",14,<p>ISO 17257:2013 provides a qualitative method for the identification of rubbers by their pyrolysis products using tandem the gas-chromatography/mass spectrometry.</p><p>The method applies to rubbers in the raw state and to unvulcanized and vulcanized compounds. Compounds can be based on a single rubber or a blend of two or more rubbers. Where the l

6345,IS,,ISO 1726:1973,Road vehicles — Mechanical coupling between tractors and semi-trailers — Interchangeability,Véhicules routiers — Liaisons mécaniques entre tracteurs et semi-remorques — Interchangeabilité,1973-05-01,1,['43.040.70'],ISO/TC 22,9599,,[6346],"['en','fr']",4,

6346,IS,,ISO 1726:1989,Road vehicles — Mechanical coupling between tractors and semi-trailers — Interchangeability,Véhicules routiers — Liaisons mécaniques entre tracteurs et semi-remorques — Interchangeabilité,1989-11-02,2,['43.040.70'],ISO/TC 22,9599,[6345],[22850],"['en','fr']",6,

46105,IS,,ISO 1726-3:2010,Road vehicles — Mechanical couplings between tractors and semi-trailers — Part 3: Requirements for semi-trailer contact area to fifth wheel,Véhicules routiers — Liaisons mécaniques entre tracteurs et semi-remorques — Partie 3: Exigences pour plateaux à friction de semi-remorques,2010-08-11,1,['43.040.70'],ISO/TC 22/SC 40,9599,,[79735],['en'],5,<p>ISO 1726-3:2010 specifies the test conditions of a static test to be performed on the semi-trailer contact area to the fifth wheel. It ensures the ability of the semi-trailer to couple the greatest possible variety of tractor vehicles equipped with a fifth wheel coupling in accordance with ISO 3842.</p>

30589,IS,,ISO 17266:2002,"Cinematography — Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives — Position and width dimensions","Cinématographie — Enregistrements des commandes et du son photographiques analogiques et numériques multicanaux sur copies et négatifs cinématographiques 35 mm, et enregistrements des commandes sonores numériques sur copies et négatifs cinématographiques 70 mm — Position et dimensions en largeur",2002-07-11,1,['37.060.20'],ISO/TC 36,9599,,[74447],['en'],9,"<p>ISO 17266:2002 specifies the lateral, and vertical where appli

36745,IS,,ISO 17268:2006,Compressed hydrogen surface vehicle refuelling connection devices,Dispositifs de raccordement pour le ravitaillement des véhicules terrestres en hydrogène comprimé,2006-03-29,1,"['43.180','71.100.20']",ISO/TC 197,9599,,[51194],"['en','fr']",19,"<p>ISO 17268:2006 applies to design, safety and operation verification of Compressed Hydrogen Surface Vehicle (CHSV) refuelling connection devices hereinafter referred to as nozzle and receptacle. CHSV Refuelling nozzles and receptacles consist of the following components, as applicable:</p><ul><li>Receptacle and protective cap (mounted on vehicle); and</li><li>Nozzle.</li></ul><p>ISO 17268:2006 applies to devices which have w

51194,IS,,ISO 17268:2012,Gaseous hydrogen land vehicle refuelling connection devices,Dispositifs de raccordement pour le ravitaillement des véhicules terrestres à hydrogène gazeux,2012-11-27,2,"['43.180','71.100.20']",ISO/TC 197,9599,[36745],[68442],"['en','fr']",35,"<p>ISO 17268:2012 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors consisting of, as applicable, a receptacle and a protective cap (mounted on vehicle), and a nozzle.</p><p>It applies to refuelling connectors which have working pressures of 11 MPa, 25 MPa, 35 MPa and 70 MPa, referred to as</p><ul><li>H11 - 11 MPa at 15 °C,</li><li>H25 - 25 MPa at 15 °C,</li><l

59507,IS,,ISO 17278:2013,"Rubber, raw natural — Determination of the gel content of technically specified rubber (TSR)",Caoutchouc naturel brut — Détermination de la teneur en gel des caoutchoucs spécifiés techniquement (TSR),2013-08-07,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[77457],"['en','ru']",7,<p>ISO 17278:2013 specifies a method for the determination of gel content for technically specified rubbers (TSR).</p>

6347,IS,,ISO 1728:1980,Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability,Véhicules routiers — Liaisons de freinage pneumatique entre automobiles et véhicules tractés — Interchangeabilité,1980-05-01,2,['43.040.40'],ISO/TC 22,9599,,[44103],"['en','fr']",6,<p>Specifies the requirements with concern to vehicle combinations equipped with pneumatic braking systems with two circuits: one control circuit and one pneumatic power circuit. Some figures illustrate shapes and reference quantities of concern. This second edition cancels and replaces the first edition (1975).</p>

30590,IS,,ISO 17281:2002,Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s),Plastiques — Détermination de la ténacité à la rupture (GIC et KIC) à vitesses de charge modérément élevées (1 m/s),2002-10-30,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[68099],['en'],22,"<p>ISO 17281 provides guidelines for determining the fracture toughness of plastics in the crack-opening mode (Mode I) by a linear elastic fracture mechanics (LEMF) approach, at load-point displacement rates of up to 1 m/s. It supplements ISO 13586 so as to extend its applicability to loading rates somewhat higher than is the case in the scope of the latter International Standard.</p><p>

33526,IS,,ISO 17288-1:2002,Passenger cars — Free-steer behaviour — Part 1: Steering-release open-loop test method,Voitures particulières — Comportement volant libre — Partie 1: Méthode d'essai en boucle ouverte avec relâchement du volant,2002-06-13,1,['43.100'],ISO/TC 22,9599,,[53603],"['en','fr']",7,"<p>ISO 17288-1 specifies an open-loop test method for determining the free control stability of a passenger car as defined in ISO 3833, by measurement of the transient behaviour following steering release, starting from a steady-state cornering status.</p>"

30598,IS,,ISO 17288-2:2004,Passenger cars — Free-steer behaviour — Part 2: Steering-pulse open-loop test method,Voitures particulières — Comportement volant libre — Partie 2: Méthode d'essai en boucle ouverte avec impulsion au volant,2004-08-25,1,['43.100'],ISO/TC 22,9599,,[53604],"['en','fr']",13,"<p>ISO 17288-2:2004 specifies a procedure for determining the free control stability of a passenger car as defined in ISO 3833, by measurement of the transient behaviour following steering pulse input, starting from a straight-ahead, steady-state status.</p>"

31327,IS,,ISO 17292:2004,"Metal ball valves for petroleum, petrochemical and allied industries","Robinets à tournant sphérique pour les industries du pétrole, de la pétrochimie et les industries connexes",2004-07-28,1,"['23.060.20','75.200']",ISO/TC 153,9599,,[59736],"['en','fr']",22,"<p>ISO 17292:2004 specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants, and related industrial applications. It covers valves of the nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450 and 500, corresponding to nominal pipe sizes NPS 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 6, 8, 10, 12, 14,

32957,IS,,ISO 17294-1:2004,Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines,Qualité de l'eau — Application de la spectrométrie de masse avec plasma à couplage inductif (ICP-MS) — Partie 1: Lignes directrices générales,2004-09-08,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[81328],"['en','fr']",33,"<p>ISO 17294-1:2004 specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general directions for the use of this technique for determining elements in water. Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter may be introduced too. ISO 17294 applies to t

36127,IS,,ISO 17294-2:2003,Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of 62 elements,Qualité de l'eau — Application de la spectrométrie de masse avec plasma à couplage inductif (ICP-MS) — Partie 2: Dosage de 62 éléments,2003-09-10,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[62962],"['en','fr']",21,"<p>ISO 17294-2:2003 specifies a method for the determination of the elements aluminium, antimony, arsenic, barium, beryllium, bismuth, boron, cadmium, caesium, calcium, cerium, chromium, cobalt, copper, dysprosium, erbium, europium, gadolinium, gallium, germanium, gold, hafnium, holmium, indium, iridium, lanthanum, lead, lithium, lutetiu

62962,IS,,ISO 17294-2:2016,Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes,Qualité de l'eau — Application de la spectrométrie de masse avec plasma à couplage inductif (ICP-MS) — Partie 2: Dosage des éléments sélectionnés y compris les isotopes d'uranium,2016-07-04,2,['13.060.50'],ISO/TC 147/SC 2,9599,[36127],[82245],"['en','fr']",31,"<p>ISO 17294-2:2016 specifies a method for the determination of the elements aluminium, antimony, arsenic, barium, beryllium, bismuth, boron, cadmium, caesium, calcium, cerium, chromium, cobalt, copper, dysprosium, erbium, gadolinium, gallium, germanium,

61627,IS,,ISO 17296-3:2014,Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods,Fabrication additive — Principes généraux — Partie 3: Principales caractéristiques et méthodes d'essai correspondantes,2014-08-22,1,['25.030'],ISO/TC 261,9599,,[81802],"['en','fr','ru']",14,"<p>ISO 17296-3:2014 covers the principal requirements applied to testing of parts manufactured by additive manufacturing processes. It specifies main quality characteristics of parts, specifies appropriate test procedures, and recommends the scope and content of test and supply agreements.</p><p>ISO 17296-3:2014 is aimed at machine manufacturers, feedstock suppliers, machin

61628,IS,,ISO 17296-4:2014,Additive manufacturing — General principles — Part 4: Overview of data processing,Fabrication additive — Principes généraux — Partie 4: Vue d'ensemble des échanges de données,2014-08-19,1,['25.030'],ISO/TC 261,9599,,[76830],"['en','fr','ru']",7,"<p>ISO 17296-4:2014 covers the principal considerations which apply to data exchange for additive manufacturing. It specifies terms and definitions which enable information to be exchanged describing geometries or parts such that they can be additively manufactured. The data exchange method outlines file type, data enclosed formatting of such data and what this can be used for.</p><p>ISO 17296-4:2014 enables a suitable form

35835,IS,,ISO 17321-1:2006,"Graphic technology and photography — Colour characterisation of digital still cameras (DSCs) — Part 1: Stimuli, metrology and test procedures","Technologie graphique et photographie — Caractérisation de la couleur des appareils photonumériques — Partie 1: Stimuli, métrologie et modes opératoires d'essai",2006-12-01,1,['37.040.10'],ISO/TC 42,9599,,[56537],['en'],25,"<p>ISO 17321-1:2006 specifies colour stimuli, metrology, and test procedures for the colour characterization of a digital still camera (DSC) to be used for photography and graphic technology. Two methods are provided, one using narrow spectral band illumination and the other using a spectrally and color

59592,IS,,ISO 17328:2014,Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials,Optique et photonique — Matériaux et composants optiques — Méthode d'essai de l'indice de réfraction des matériaux optiques infrarouges,2014-10-20,1,['37.020'],ISO/TC 172/SC 3,9599,,[81620],"['en','fr']",15,"<p>ISO 17328:2014 provides a standard method for measuring the relative refractive index to the air of infrared materials used in the infrared spectral range from 0,78 µm to 25 µm.</p>"

31346,IS,,ISO 17339:2002,Ships and marine technology — Sea anchors for survival craft and rescue boats,Navires et technologie maritime — Ancres flottantes pour embarcations de sauvetage et canots de secours,2002-11-13,1,['47.080'],ISO/TC 8/SC 1,9599,,[68364],['en'],5,"<p>ISO 17339:2002 specifies requirements for the design, performance and prototype testing of sea anchors fitted to survival craft (lifeboats and liferafts) and rescue boats in accordance with the IMO <i>International Life-Saving Appliance Code</i>.</p>"

59594,IS,,ISO 17340:2014,Metallic materials — Ductility testing — High speed compression test for porous and cellular metals,Matériaux métalliques — Essais de ductilité — Essai de compression à haute vitesse des métaux poreux et cellulaires,2014-05-06,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[80372],"['en','fr']",16,"<p>ISO 17340:2014 specifies methods for high speed compression testing, at room temperature, of porous and cellular metals having a porosity of 50 % or more. The speed range applicable to this test method is 0,1 m/s to 100 m/s (or 1 s⁻¹ to 10³ s⁻¹ in terms of the initial strain rate when the specimen height is 100 mm).</p>"

6351,IS,,ISO 1735:1975,Cheese and processed cheese products — Determination of fat content (Reference method),Fromages et fromages fondus — Détermination de la teneur en matière grasse (Méthode de référence),1975-12-01,1,['67.100.30'],ISO/TC 34/SC 5,9599,,[6352],"['en','fr']",3,

6352,IS,,ISO 1735:1987,Cheese and processed cheese products — Determination of fat content — Gravimetric method (Reference method),Fromages et fromages fondus — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),1987-12-17,2,['67.100.30'],ISO/TC 34/SC 5,9599,[6351],[35250],"['en','fr']",8,"<p>Describes a method based on the Schmid-Bondzynski-Ratzlaff principle which consists in digesting a test portion with hydrochloric acid, adding ethanol and subsequently extracting the acid-ethanolic solution with diethyl ether and light petroleum, removing the solvent by distillation or evaporation, and determining the mass of the substances extracted which are so

35250,IS,,ISO 1735:2004,Cheese and processed cheese products — Determination of fat content — Gravimetric method (Reference method),Fromages et fromages fondus — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),2004-07-01,3,['67.100.30'],ISO/TC 34/SC 5,9599,[6352],[75227],"['en','fr']",15,<p>ISO 1735|IDF 5:2004 specifies the reference method for the determination of the fat content of all types of cheese and processed cheese products having lactose contents of below 5 % (mass fraction) of non-fat solids.</p>

33005,IS,,ISO 17355:2003,Space data and information transfer systems — CCSDS file delivery protocol,Systèmes de transfert des informations et données spatiales — Protocole CCSDS de livraison des fichiers,2003-01-28,1,['49.140'],ISO/TC 20/SC 13,9599,,[38593],['en'],152,"<p>ISO 17355:2002 specifies the requirements for a file delivery protocol and associated service for application in the space environment. It is intended for use over the current and envisaged packet delivery services used in the space environment.</p><p>ISO 17355:2002 specifies a protocol and associated services that are applicable to space missions with continuous duplex contact, intermittent duplex contact, asymmetrical tim

38593,IS,,ISO 17355:2004,Space data and information transfer systems — CCSDS file delivery protocol,Systèmes de transfert des informations et données spatiales — Protocole CCSDS de livraison de fichiers,2004-05-18,2,['49.140'],ISO/TC 20/SC 13,9599,[33005],[43829],['en'],153,<p>ISO 17355:2004 specifies the requirements for a file delivery protocol and associated service for application in the space environment. It is intended for use over the current and envisaged packet delivery services used in the space environment.</p>

33010,IS,,ISO 17357:2002,Ships and marine technology — High-pressure floating pneumatic rubber fenders,Navires et technologie maritime — Éperons pneumatiques flottants à haute pression,2002-11-21,1,"['83.140.99','47.020.99']",ISO/TC 8/SC 4,9599,,"[55715,59873,59874]",['en'],16,"<p>ISO 17357:2002 specifies the material, performance and dimensions of high-pressure floating pneumatic rubber fenders, which are intended to be used for the berthing and mooring of a ship to another ship or berthing structure. It also specifies the test and inspection procedures for high-pressure floating pneumatic rubber fenders.</p><p>ISO 17357:2002 does not address any safety hazards associated with its use. It i

33011,IS,,ISO 17359:2003,Condition monitoring and diagnostics of machines — General guidelines,Surveillance et diagnostic d'état des machines — Lignes directrices générales,2003-06-27,1,['17.160'],ISO/TC 108/SC 5,9599,,[39912],"['en','fr']",16,"<p>ISO 17359:2003 sets out guidelines for the general procedures to be considered when setting up a condition monitoring programme for machines, and includes references to associated standards required in this process. It is applicable to all machines.</p>"

39912,IS,,ISO 17359:2011,Condition monitoring and diagnostics of machines — General guidelines,Surveillance et diagnostic d'état des machines — Lignes directrices générales,2011-04-07,2,['17.160'],ISO/TC 108/SC 5,9599,"[33011,21840]",[71194],"['en','fr']",26,<p>ISO 17359:2011 sets out guidelines for the general procedures to be considered when setting up a condition monitoring programme for machines and includes references to associated standards required in this process. ISO 17359:2011 applies to all machines.</p>

6353,IS,,ISO 1736:1981,Dried milk — Determination of fat content (Reference method),Lait sec — Détermination de la teneur en matière grasse (Méthode de référence),1981-03-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[6354],"['en','fr']",3,

6354,IS,,ISO 1736:1985,"Dried milk, dried whey, dried buttermilk and dried butter serum — Determination of fat content — Gravimetric method (Reference method)","Lait sec, lactosérum sec, babeurre sec et sérum de beurre sec — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence)",1985-12-19,2,['67.100.01'],ISO/TC 34/SC 5,9599,[6353],[26548],"['en','fr']",8,

26548,IS,,ISO 1736:2000,Dried milk and dried milk products — Determination of fat content — Gravimetric method (Reference method),Lait sec et produits à base de lait sec — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),2000-03-09,3,['67.100.10'],ISO/TC 34/SC 5,9599,[6354],[51010],"['en','fr']",14,

51010,IS,,ISO 1736:2008,Dried milk and dried milk products — Determination of fat content — Gravimetric method (Reference method),Lait sec et produits à base de lait sec — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),2008-10-02,4,['67.100.10'],ISO/TC 34/SC 5,9599,[26548],[75226],"['en','fr']",14,"<p>ISO 1736|IDF 9:2008 specifies the reference method for the determination of the fat content of dried milk and dried milk products. The method is applicable to dried milk with a fat content of 40 % mass fraction or more, dried whole, dried partially skimmed, and dried skimmed milk, dried whey, dried buttermilk and dried butter serum.</p><p>The method

41105,IS,,ISO 17361:2007,Intelligent transport systems — Lane departure warning systems — Performance requirements and test procedures,Systèmes intelligents de transport — Systèmes d'avertissement de départ de ruelle — Exigences de performance et méthodes d'essai,2007-01-15,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[72349],['en'],19,"<p>ISO 17361:2007 specifies the definition of the system, classification, functions, human-machine interface (HMI) and test methods for lane departure warning systems. These are in-vehicle systems that can warn the driver of a lane departure on highways and highway-like roads. The subject system, which may utilize optical, electromagnetic, GPS or other sens

38331,IS,,ISO 17363:2007,Supply chain applications of RFID — Freight containers,Applications RFID à la chaîne logistique — Conteneurs de fret,2007-06-19,1,['55.020'],ISO/TC 122,9599,,[57596],['en'],14,"<p>ISO 17363:2007 defines the usage of read/write radio-frequency identification technology (RFID) cargo shipment-specific tags on freight containers for supply chain management purposes (shipment tags). It defines the air-interface communications, a common set of required data structures, and a commonly organized set of optional data requirements (through common syntax and semantics).</p><p>It contains recommendations about a containerized cargo supply chain RFID system, based on shipment tag

38333,IS,,ISO 17364:2009,Supply chain applications of RFID — Returnable transport items (RTIs),Applications RFID à la chaîne logistique — Éléments restituables de transport (RTI),2009-11-04,1,['55.020'],ISO/TC 122,9599,,[55554],['en'],23,"<p>ISO 17364:2009 defines the basic features of RFID for the use in the supply chain when applied to returnable transport items. In particular it:</p><ul><li>provides specifications for the identification of the RTI,</li><li>makes recommendations about additional information on the RF tag,</li><li>specifies the semantics and data syntax to be used,</li><li>specifies the data protocol to be used to interface with business applications and the RFID system,</l

55554,IS,,ISO 17364:2013,Supply chain applications of RFID — Returnable transport items (RTIs) and returnable packaging items (RPIs),Applications de chaîne d'approvisionnements de RFID — Éléments restituables de transport (RTIs) et éléments d'empaquetage restituables (RPIs),2013-02-22,2,['55.020'],ISO/IEC JTC 1/SC 31,9599,[38333],[83586],['en'],46,"<p>This International Standard defines the basic features of RFID for use in the supply chain when applied to returnable transport items (RTIs). In particular it </p><p>— provides specifications for the identification of the RTI and the returnable packaging item (RPI),</p><p>— makes recommendations about additional information on the RF tag,</p><p

38335,IS,,ISO 17365:2009,Supply chain applications of RFID — Transport units,Applications RFID à la chaîne logistique — Unités de transport,2009-11-04,1,['55.020'],ISO/TC 122,9599,,[55563],['en'],19,"<p>ISO 17365:2009 defines the basic features of RFID for the use in the supply chain when applied to transport units. In particular it:</p><ul><li>provides specifications for the identification of the transport unit,</li><li>makes recommendations about additional information on the RF tag,</li><li>specifies the semantics and data syntax to be used,</li><li>specifies the data protocol to be used to interface with business applications and the RFID system,</li><li>specifies the minimum performance

55563,IS,,ISO 17365:2013,Supply chain applications of RFID — Transport units,Applications de chaîne d'approvisionnements de RFID — Unités de transport,2013-02-22,2,['55.020'],ISO/IEC JTC 1/SC 31,9599,[38335],[83586],['en'],32,"<p>ISO 17365:2013 defines the basic features of RFID for use in the supply chain when applied to transport units. In particular it</p><p>a) provides specifications for the identification of the transport unit,</p><p>b) makes recommendations about additional information on the RF tag,</p><p>c) specifies the semantics and data syntax to be used,</p><p>d) specifies the data protocol to be used to interface with business applications and the RFID system,</p><p>e) specifies

38336,IS,,ISO 17366:2009,Supply chain applications of RFID — Product packaging,Applications RFID à la chaîne logistique — Empaquetage de produit,2009-11-04,1,['55.020'],ISO/TC 122,9599,,[55565],['en'],21,

55565,IS,,ISO 17366:2013,Supply chain applications of RFID — Product packaging,Applications de chaîne d'approvisionnements de RFID — Empaquetage de produit,2013-02-22,2,['55.020'],ISO/IEC JTC 1/SC 31,9599,[38336],[83586],['en'],32,"<p>ISO 17366:2013 defines the basic features of RFID for use in the supply chain when applied to product packaging. In particular it</p><p>a) provides specifications for the identification of the product packaging,</p><p>b) makes recommendations about additional information on the RF tag,</p><p>c) specifies the semantics and data syntax to be used,</p><p>d) specifies the data protocol to be used to interface with business applications and the RFID system,</p><p>e)

38337,IS,,ISO 17367:2009,Supply chain applications of RFID — Product tagging,Applications RFID à la chaîne logistique — Étiquetage de produit,2009-11-04,1,['55.020'],ISO/TC 122,9599,,[55568],['en'],41,"<p>ISO 17367:2009 defines the basic features of RFID for the use in the supply chain when applied to product tagging. In particular it</p><ul><li>provides specific recommendations about the encoded identification of the product,</li><li>makes recommendations about additional information about the product on the RF tag,</li><li>makes recommendations about the semantics and data syntax to be used,</li><li>makes recommendations about the data protocol to be used to interface with business applica

55568,IS,,ISO 17367:2013,Supply chain applications of RFID — Product tagging,Applications de chaîne d'approvisionnements de RFID — Étiquetage de produit,2013-02-22,2,['55.020'],ISO/IEC JTC 1/SC 31,9599,[38337],[83586],['en'],51,"<p>ISO 17367:2013 defines the basic features of RFID for use in the supply chain when applied to product tagging. In particular it</p><p>a) provides specific recommendations about the encoded identification of the product,</p><p>b) makes recommendations about additional information about the product on the RF tag,</p><p>c) makes recommendations about the semantics and data syntax to be used,</p><p>d) makes recommendations about the data protocol to be used to interfa

6355,IS,,ISO 1737:1981,Evaporated milk and sweetened condensed milk — Determination of fat content (Reference method),Lait condensé sucré ou non sucré — Détermination de la teneur en matière grasse (Méthode de référence),1981-03-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[6356],"['en','fr']",3,

6356,IS,,ISO 1737:1985,Evaporated milk and sweetened condensed milk — Determination of fat content — Gravimetric method (Reference method),Lait concentré sucré et non sucré — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),1985-09-19,2,['67.100.10'],ISO/TC 34/SC 5,9599,[6355],[26547],"['en','fr']",8,

26547,IS,,ISO 1737:1999,Evaporated milk and sweetened condensed milk — Determination of fat content — Gravimetric method (Reference method),Lait concentré sucré et non sucré — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),1999-12-02,3,['67.100.10'],ISO/TC 34/SC 5,9599,[6356],[51011],"['en','fr']",14,

51011,IS,,ISO 1737:2008,Evaporated milk and sweetened condensed milk — Determination of fat content — Gravimetric method (Reference method),Lait concentré sucré et non sucré — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),2008-10-02,4,['67.100.10'],ISO/TC 34/SC 5,9599,[26547],[75226],"['en','fr']",15,<p>ISO 1737|IDF 13:2008 specifies the reference method for the determination of the fat content of all types of evaporated milk and sweetened condensed milk (liquid sweetened and unsweetened concentrated milk).</p>

31363,IS,,ISO 17373:2005,Road vehicles — Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact,Véhicules routiers — Mode opératoire d'essai sur chariot pour évaluer les interactions de la tête et du cou de l'occupant avec le siège et l'appuie-tête lors d'un choc arrière à faible vitesse,2005-09-16,1,['43.020'],ISO/TC 22/SC 36,9599,,[72229],"['en','fr']",25,<p>The sled test procedure described in ISO 17373:2005 simulates low-speed rear-end impact resulting in a velocity change of the struck vehicle of 15 km/h. Its main purpose is the evaluation of the whiplash associated disorders due to seat occupant interactions

6357,IS,,ISO 1738:1980,Butter — Determination of salt content (Reference method),Beurre — Détermination de la teneur en sel (Méthode de référence),1980-02-01,1,['67.100.20'],ISO/TC 34/SC 5,9599,,[6358],"['en','fr']",2,

6358,IS,,ISO 1738:1997,Butter — Determination of salt content,Beurre — Détermination de la teneur en sel,1997-12-11,2,['67.100.20'],ISO/TC 34/SC 5,9599,[6357],[40470],"['en','fr']",5,

33033,IS,,ISO 17380:2004,Soil quality — Determination of total cyanide and easily released cyanide — Continuous-flow analysis method,Qualité du sol — Détermination des cyanures totaux et des cyanures aisément libérables — Méthode d'analyse en flux continu,2004-11-23,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[55886],"['en','fr']",15,"<p>ISO 17380:2004 specifies a method for the photometric determination of the total cyanide and the easily released cyanide mass fraction in soil using an automated-distillation continuous-flow analysis.</p><p>ISO 17380:2004 applies to all types of soil with cyanide mass fractions above 1 mg/kg on the basis of dry matter, expressed on the basis of the cyanide ion.</p

30634,IS,,ISO 17386:2004,Transport information and control systems — Manoeuvring Aids for Low Speed Operation (MALSO) — Performance requirements and test procedures,Systèmes d'information et de commande des transports — Aides à la conduite pour manoeuvre à vitesse réduite (MALSO) — Exigences de performance et modes opératoires,2004-07-08,1,['43.040.15'],ISO/TC 204,9599,,[51448],['en'],18,"<p>ISO 17386:2004 for Manoeuvring Aids for Low Speed Operation addresses light-duty vehicles, e.g. passenger cars, pick-up trucks, light vans and sport utility vehicles (motorcycles excluded) equipped with such MALSO systems. It specifies minimum functionality requirements which the driver can generally ex