Withdrawn and superseded ISO standards — page 54 of 246

36903,IS,,ISO 15835-1:2009,Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars — Part 1: Requirements,Aciers pour l'armature du béton — Coupleurs d'armature destinés aux raboutages mécaniques de barres — Partie 1: Exigences,2009-03-25,1,['77.140.15'],ISO/TC 17/SC 16,9599,,[67967],"['en','fr','ru']",14,"<p>ISO 15835-1:2009 specifies requirements for reinforcement couplers, hereafter called couplers, to be used for splicing of steel reinforcing bars.</p><p>ISO 15835-1:2009 specifies requirements for couplers to be used for mechanical splices in reinforced concrete structures under predominantly static loads and additional requirements for couplers t

36904,IS,,ISO 15835-2:2009,Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars — Part 2: Test methods,Aciers pour l'armature du béton — Coupleurs d'armature destinés aux raboutages mécaniques de barres — Partie 2: Méthodes d'essai,2009-03-25,1,['77.140.15'],ISO/TC 17/SC 16,9599,,[67968],"['en','fr','ru']",11,<p>ISO 15835-2:2009 specifies test methods applicable to couplers for mechanical splices of steel reinforcing bars.</p><p>ISO 15835-2:2009 is intended to be applicable in relation to the various standards for steel reinforcing bars as well as in relation to the various reinforced concrete design standards.</p>

37629,IS,,ISO 15836:2003,Information and documentation - The Dublin Core metadata element set,Information et documentation - L'ensemble des éléments de métadonnées Dublin Core,2003-11-26,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[52142],"['en','fr']",6,"<p>ISO 15836:2003 is applicable to the Dublin Core metadata element set which deals with cross-domain information resource description. For Dublin Core applications, a resource will typically be an electronic document.</p><p>ISO 15836:2003 is for the element set only, which is generally used in the context of a specific project or application. Local or community based requirements and policies may impose additional restrictions, rules, and interpr

52142,IS,,ISO 15836:2009,Information and documentation — The Dublin Core metadata element set,Information et documentation — L'ensemble des éléments de métadonnées Dublin Core,2009-02-18,2,['35.240.30'],ISO/TC 46/SC 4,9599,[37629],"[71341,71339]","['en','fr']",5,"<p>ISO 15836:2009 establishes a standard for cross-domain resource description, known as the Dublin Core Metadata Element Set. Like RFC 3986, ISO 15836:2009 does not limit what might be a resource.</p><p>ISO 15836:2009 defines the elements typically used in the context of an application profile which constrains or specifies their use in accordance with local or community-based requirements and policies. However, it does not define i

54784,IS,Cor,ISO 15836:2009/Cor 1:2009,Information and documentation — The Dublin Core metadata element set — Technical Corrigendum 1,Information et documentation — L'ensemble des éléments de métadonnées Dublin Core — Rectificatif technique 1,2009-07-23,2,['35.240.30'],ISO/TC 46/SC 4,9599,,"[71341,71339]",['en'],1,

38023,IS,,ISO 15841:2006,Dentistry — Wires for use in orthodontics,Art dentaire — Fils pour utilisation en orthodontie,2006-10-06,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[62223],"['en','fr']",9,"<p>ISO 15841:2006 specifies requirements and test methods for wires to be used in fixed and removable orthodontic appliances. It includes preformed orthodontic archwires but excludes springs and other preformed components.</p><p>ISO 15841:2006 gives detailed requirements concerning the presentation of the physical and mechanical properties of orthodontic wires, the test methods by which they can be determined, packaging, and labelling information.</p>"

29242,IS,,ISO 15848-1:2006,"Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 1: Classification system and qualification procedures for type testing of valves","Robinetterie industrielle — Mesurage, essais et modes opératoires de qualification pour émissions fugitives — Partie 1: Système de classification et modes opératoires de qualification pour les essais de type des appareils de robinetterie",2006-01-12,1,['23.060.01'],ISO/TC 153,9599,,[61441],"['en','fr','ru']",48,"<p>ISO 15848-1:2005 specifies testing procedures, for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intende

31170,IS,,ISO 15848-2:2006,"Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 2: Production acceptance test of valves","Robinetterie industrielle — Mesurage, essais et modes opératoires de qualification pour émissions fugitives — Partie 2: Essais de réception en production des appareils de robinetterie",2006-08-10,1,['23.060.01'],ISO/TC 153,9599,,[61442],"['en','fr','ru']",3,"<p>ISO 15848-2:2006 specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. End connection joints, vacuum app

6178,IS,,ISO 1585:1982,Road vehicles — Engines test code — Net power,Véhicules routiers — Code d'essai des moteurs — Puissance nette,1982-05-01,2,['43.060.01'],ISO/TC 22,9599,,[6179],"['en','fr']",22,

6179,IS,,ISO 1585:1992,Road vehicles — Engine test code — Net power,Véhicules routiers — Code d'essai des moteurs — Puissance nette,1992-10-29,3,['43.060.01'],ISO/TC 22/SC 34,9599,[6178],"[41010,70078]","['en','fr']",26,"<p>Applies to rotary piston engines and reciprocating internal combustion engines except of free piston engines for passenger cars and other motor vehicles, excluding motorcycles, mopeds and agricultural tractors, normally travelling on roads. Specifies a method of testing to evaluate their performance with a view, in particular, to presenting curves of power and specific fuel consumption at full load as a function of engine speed.</p>"

28833,IS,,ISO 15850:2002,Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach,Plastiques — Détermination de la propagation de fissure par fatigue en traction — Approche de la mécanique linéaire élastique de la rupture (LEFM),2002-06-20,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[63978],['en'],17,<p>ISO 15850 specifies a method for measuring the propagation of a crack in a notched specimen subjected to a cyclic tensile load varying between a constant positive minimum and a constant positive maximum value. The test results include the crack length as a function of the number of load cycles and the crack length increase rate as a fu

37635,IS,,ISO 15854:2005,Dentistry — Casting and baseplate waxes,Art dentaire — Cires pour coulée et pour plaque de base,2005-07-15,1,['11.060.10'],ISO/TC 106/SC 2,9599,"[20265,21058]",[75544],"['en','fr']",12,"<p>ISO 15854:2005 is applicable to dental casting wax and to dental baseplate wax. It specifies the classification of, and requirements for, dental casting wax and baseplate wax together with the test methods to be employed to determine compliance with these requirements.</p>"

75544,IS,,ISO 15854:2021,Dentistry — Casting and baseplate waxes,Médecine bucco-dentaire — Cires pour coulée et pour plaque de base,2021-01-29,2,['11.060.10'],ISO/TC 106/SC 2,9599,[37635],[82846],"['en','fr']",19,<p>This document specifies the classification of and requirements for dental casting and dental baseplate waxes together with the test methods to be employed to determine compliance with these requirements.</p><p>This document does not apply to waxes supplied for additive manufacturing or CAD/CAM-based procedures.</p>

29313,IS,,ISO 15864:2004,"Space systems — General test methods for space craft, subsystems and units","Systèmes spatiaux — Méthodes d'essai générales pour véhicules spatiaux, sous-systèmes et équipements",2004-08-10,1,['49.140'],ISO/TC 20/SC 14,9599,,[78975],"['en','fr']",30,"<p>ISO 15864:2004 provides the baseline standard on the subject of testing at the system, subsystem, and unit level for applicable unmanned spacecraft programs. It also provides the requirements for documentation associated with testing activities.</p><p>The acceptance criteria, specifications or procedures, and other detail test requirements applicable to a particular program are defined in the applicable technical spe

29314,IS,,ISO 15865:2005,Space systems — Qualification assessment,Systèmes spatiaux — Évaluation de la qualification,2005-03-16,1,['49.140'],ISO/TC 20/SC 14,9599,,[82408],"['en','fr']",21,"<p>ISO 15865:2005 establishes common rules for assessing the qualification of space systems and products used in space systems against their functional and technical specifications. It establishes a basis for determining system or product readiness for any stage of the life cycle. This includes, for example, readiness for development, manufacture, test, operation, modification, or disposal.</p><p>ISO 15865:2005 is applicable to systems and products used in flight or ground support and to products at all le

29326,IS,,ISO 15871:2000,Industrial trucks — Specifications for indicator lights for container handling and grappler arm operations,Chariots de manutention — Spécifications relatives aux voyants lumineux pour la manutention de conteneurs et les opérations de bras de grappin,2000-09-21,1,['53.060'],ISO/TC 110/SC 2,9599,,[73215],"['en','fr']",5,

29378,IS,,ISO 15872:2002,Aerospace — UNJ threads — Gauging,Aéronautique et espace — Filetage UNJ — Vérification par calibres,2002-11-22,1,['49.030.10'],ISO/TC 20/SC 4,9599,,[66312],"['en','fr']",27,"<p>ISO 15872:2002 gives information for the gauging of ISO UNJ threads complying with ISO 3161.</p><p>Other methods of ensuring that the product is within the specified limits may be used, provided correlation with the specified gauges is established.</p>"

29395,IS,,ISO 15874-1:2003,Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polypropylène (PP) — Partie 1: Généralités,2003-12-05,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[54134],"['en','fr']",8,"<p>ISO 15874-1:2003 specifies the general aspects of polypropylene (PP) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the class o

43286,IS,Amd,ISO 15874-1:2003/Amd 1:2007,Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polypropylène (PP) — Partie 1: Généralités — Amendement 1,2007-06-06,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[54134],"['en','fr']",1,

29400,IS,,ISO 15874-2:2003,Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polypropylène (PP) — Partie 2: Tubes,2003-12-05,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[54155],"['en','fr']",10,"<p>ISO 15874-2:2003 specifies the characteristics of pipes made from polypropylene (PP) for piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under operating pressures and temperatures appropriat

42864,IS,Amd,ISO 15874-2:2003/Amd 1:2007,Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polypropylène (PP) — Partie 2: Tubes — Amendement 1,2007-06-06,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[54155],"['en','fr']",1,

29401,IS,,ISO 15874-3:2003,Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polypropylène (PP) — Partie 3: Raccords,2003-12-05,1,"['23.040.45','91.140.60']",ISO/TC 138/SC 2,9599,,[54157],"['en','fr']",14,"<p>ISO 15874-3:2003 specifies the characteristics of fittings for polypropylene (PP) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to

29402,IS,,ISO 15874-5:2003,Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polypropylene (PP) — Partie 5: Aptitude à l'emploi du système,2003-12-05,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[54158],"['en','fr']",9,"<p>ISO 15874-5:2003 specifies the characteristics of the fitness for purpose of polypropylene (PP) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) and for heating sy

29396,IS,,ISO 15875-1:2003,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 1: Généralités,2003-12-08,1,"['23.040.01','91.140.60']",ISO/TC 138/SC 2,9599,,[79775],"['en','fr']",8,"<p>ISO 15875-1:2003 specifies the general aspects of crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and tem

43287,IS,Amd,ISO 15875-1:2003/Amd 1:2007,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General — Amendment 1,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 1: Généralités — Amendement 1,2007-06-06,1,"['91.140.60','23.040.01']",ISO/TC 138/SC 2,9599,,[79775],"['en','fr']",1,

29404,IS,,ISO 15875-2:2003,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 2: Tubes,2003-12-08,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[79776],"['en','fr']",12,"<p>ISO 15875-2:2003 specifies the characteristics of pipes made from crosslinked polyethylene (PE-X) for piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under operating p

42865,IS,Amd,ISO 15875-2:2003/Amd 1:2007,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 1,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 2: Tubes — Amendement 1,2007-06-06,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[79776],"['en','fr']",1,

79771,IS,Amd,ISO 15875-2:2003/Amd 2:2020,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 2,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 2: Tubes — Amendement 2,2020-11-24,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[79776],"['en','fr']",4,

29405,IS,,ISO 15875-3:2003,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 3: Raccords,2003-12-08,1,"['23.040.45','91.140.60']",ISO/TC 138/SC 2,9599,,[79777],"['en','fr']",11,"<p>ISO 15875-3:2003 specifies the characteristics of fittings for crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design press

79772,IS,Amd,ISO 15875-3:2003/Amd 1:2020,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 1,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 3: Raccords — Amendement 1,2020-12-02,1,"['23.040.45','91.140.60']",ISO/TC 138/SC 2,9599,,[79777],"['en','fr']",2,

80956,IS,Amd,ISO 15875-3:2003/Amd 2:2021,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 2,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 3: Raccords — Amendement 2,2021-10-13,1,"['23.040.45','91.140.60']",ISO/TC 138/SC 2,9599,,[79777],"['en','fr']",8,

29406,IS,,ISO 15875-5:2003,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 5: Aptitude à l'emploi du système,2003-12-08,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[79778],"['en','fr']",7,"<p>ISO 15875-5:2003 specifies the characteristics of the fitness for purpose of crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (

79773,IS,Amd,ISO 15875-5:2003/Amd 1:2020,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Amendment 1,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 5: Aptitude à l'emploi du système — Amendement 1,2020-12-02,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[79778],"['en','fr']",4,

45585,IS,Cor,ISO 15875-5:2003/Cor 1:2007,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Technical Corrigendum 1,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 5: Aptitude à l'emploi du système — Rectificatif technique 1,2007-01-18,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[79778],['fr'],,

29397,IS,,ISO 15876-1:2003,Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polybutène (PB) — Partie 1: Généralités,2003-12-08,1,"['23.040.01','91.140.60']",ISO/TC 138/SC 2,9599,,[63010],"['en','fr']",8,"<p>ISO 15876-1:2003 specifies the general aspects of polybutylene (PB) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the class of app

43288,IS,Amd,ISO 15876-1:2003/Amd 1:2007,Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General — Amendment 1,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polybutène (PB) — Partie 1: Généralités — Amendement 1,2007-06-06,1,"['91.140.60','23.040.01']",ISO/TC 138/SC 2,9599,,[63010],"['en','fr']",1,

29408,IS,,ISO 15876-2:2003,Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polybutène (PB) — Partie 2: Tubes,2003-12-08,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[63011],"['en','fr']",12,"<p>ISO 15876-2:2003 specifies the characteristics of pipes made from polybutylene (PB) for piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under operating pressures and temperatures appropriate to

42866,IS,Amd,ISO 15876-2:2003/Amd 1:2007,Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes — Amendment 1,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polybutène (PB) — Partie 2: Tubes — Amendement 1,2007-06-06,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[63011],"['en','fr']",1,

29409,IS,,ISO 15876-3:2003,Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 3: Fittings,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polybutène (PB) — Partie 3: Raccords,2003-12-08,1,"['23.040.45','91.140.60']",ISO/TC 138/SC 2,9599,,[63012],"['en','fr']",12,"<p>ISO 15876-3:2003 specifies the characteristics of fittings for polybutylene (PB) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the

29410,IS,,ISO 15876-5:2003,Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 5: Fitness for purpose of the system,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polybutène (PB) — Partie 5: Aptitude à l'emploi du système,2003-12-08,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[63013],"['en','fr']",7,"<p>ISO 15876-5:2003 specifies the characteristics of the fitness for purpose of polybutylene (PB) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) and for heating systems

29398,IS,,ISO 15877-1:2003,Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Poly(chlorure de vinyle) chloré (PVC-C) — Partie 1: Généralités,2003-12-08,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[41066],"['en','fr']",10,"<p>ISO 15877-1:2003 specifies the general aspects of chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems,

29412,IS,,ISO 15877-2:2003,Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Poly(chlorure de vinyle) chloré (PVC-C) — Partie 2: Tubes,2003-12-08,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[41067],"['en','fr']",13,"<p>ISO 15877-2:2003 specifies the characteristics of pipes made from chlorinated poly(vinyl chloride) (PVC-C) for piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heati

29413,IS,,ISO 15877-3:2003,Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Poly(chlorure de vinyle) chloré (PVC-C) — Partie 3: Raccords,2003-12-09,1,"['23.040.45','91.140.60']",ISO/TC 138/SC 2,9599,,[41068],"['en','fr']",23,"<p>ISO 15877-3:2003 specifies the characteristics of fittings for chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heatin

29414,IS,,ISO 15877-5:2003,Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Poly(chlorure de vinyle) chloré (PVC-C) — Partie 5: Aptitude à l'emploi du système,2003-12-09,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[41069],"['en','fr']",8,"<p>ISO 15877-5:2003 specifies the characteristics of the fitness for purpose of chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be int

37641,IS,,ISO 15878:2008,Road construction and maintenance equipment — Asphalt pavers — Terminology and commercial specifications,Équipement pour la construction et l'entretien des routes — Asphalteuse — Terminologie et spécifications commerciales,2008-02-25,1,"['01.040.93','93.080.10']",ISO/TC 195,9599,,[73211],['en'],31,"<p>ISO 15878:2008 deals with asphalt pavers used in road construction and maintenance processes.</p><p>ISO 15878:2008 provides terminology for the machine and its components, and also gives operation principles and commercial specifications and establishes parameters for technical characteristics.</p>"

51929,IS,Cor,ISO 15878:2008/Cor 1:2008,Road construction and maintenance equipment — Asphalt pavers — Terminology and commercial specifications — Technical Corrigendum 1,Équipement pour la construction et l'entretien des routes — Asphalteuse — Terminologie et spécifications commerciales — Rectificatif technique 1,2008-07-10,1,"['01.040.93','93.080.10']",ISO/TC 195,9599,,[73211],['en'],1,

29427,IS,,ISO 15882:2003,"Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results","Stérilisation des produits de santé — Indicateurs chimiques — Guide pour la sélection, l'utilisation et l'interprétation des résultats",2003-03-13,1,['11.080.01'],ISO/TC 198,9599,,[43293],"['en','fr']",17,"<p>ISO 15882:2003 provides guidance for the selection, use and interpretation of results of chemical indicators used in process definition, validation, and routine monitoring and control of sterilization processes. ISO 15882:2003 is applicable to chemical indicators for which International Standards exist (see ISO 11140 series).</p><p>ISO 15882

41076,IS,,ISO 15883-1:2006,"Washer-disinfectors — Part 1: General requirements, terms and definitions and tests","Laveurs désinfecteurs — Partie 1: Exigences générales, termes et définitions et essais",2006-04-06,1,['11.080.10'],ISO/TC 198,9599,,"[81249,70844]","['en','fr']",70,"<p>ISO 15883-1:2006 specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of medical, dental, pharmaceutical and veterinary practice. It specifies performance requirements for cleaning and disinfection as well as for the accessories which can be require

59843,IS,Amd,ISO 15883-1:2006/Amd 1:2014,"Washer-disinfectors — Part 1: General requirements, terms and definitions and tests — Amendment 1","Laveurs désinfecteurs — Partie 1: Exigences générales, termes et définitions et essais — Amendement 1",2014-06-25,1,['11.080.10'],ISO/TC 198,9599,,"[81249,70844]","['en','fr']",6,

41077,IS,,ISO 15883-2:2006,"Washer-disinfectors — Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc.","Laveurs désinfecteurs — Partie 2: Exigences et essais pour laveurs désinfecteurs destinés à la désinfection thermique des instruments chirurgicaux, du matériel d'anesthésie, des bacs, plats, récipients, ustensiles, de la verrerie, etc.",2006-04-06,1,['11.080.10'],ISO/TC 198,9599,,[84377],"['en','fr','ru']",10,"<p>ISO 15883-2:2006 specifies particular requirements for washer disinfectors (WD) that are intended for use for the cleaning and thermal disinfecti

41078,IS,,ISO 15883-3:2006,Washer-disinfectors — Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers,Laveurs désinfecteurs — Partie 3: Exigences et essais pour laveurs désinfecteurs destinés à la désinfection thermique de récipients à déjections humaines,2006-04-06,1,['11.080.10'],ISO/TC 198,9599,,[84378],"['en','fr']",11,"<p>ISO 15883-3:2006 specifies particular requirements for washer-disinfectors (WD) that are intended to be used for emptying, flushing, cleaning and thermal disinfection of containers used to hold human waste for disposal by one operating cycle.</p><p>ISO 15883-3:2006 is to be applied in conjunction with ISO 1588

42060,IS,,ISO 15883-4:2008,Washer-disinfectors — Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes,Laveurs désinfecteurs — Partie 4: Exigences et essais pour les laveurs désinfecteurs destinés à la désinfection chimique des endoscopes thermolabiles,2008-04-29,1,['11.080.10'],ISO/TC 198,9599,,[63696],"['en','fr','ru']",49,"<p>ISO 15883-4:2008 specifies the particular requirements, including performance, for washer-disinfectors (WDs) that are intended to be used for cleaning and chemical disinfection of thermolabile endoscopes.</p><p>ISO 15883-4:2008 also specifies the performance requirements for the cleaning and disinfection of

46487,IS,,ISO 15883-6:2011,"Washer-disinfectors — Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment","Laveurs désinfecteurs — Partie 6: Exigences et essais pour les laveurs désinfecteurs utilisant une désinfection thermique pour les dispositifs médicaux non invasifs, non critiques et pour l'équipement de soins de santé",2011-04-12,1,['11.080.10'],ISO/TC 198,9599,,[86252],"['en','fr','ru']",7,"<p>ISO 15883-6:2011 specifies particular requirements for washer-disinfectors (WDs) intended for use when the level of assurance of disinfection that is necessary can be achieved by cleaning and t

56650,IS,,ISO 15883-7:2016,"Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment","Laveurs désinfecteurs — Partie 7: Exigences et essais pour les laveurs désinfecteurs destinés à la désinfection chimique des dispositifs médicaux thermosensibles, non invasifs et non critiques et des équipements de soins de santé",2016-02-02,1,['11.080.10'],ISO/TC 198,9599,,[84379],"['en','fr']",30,"<p>ISO 15883-7:2016 specifies the particular requirements for washer-disinfectors (WD) intended to be used for the cleaning and chemical disinfection, in a single operating cy

29439,IS,,ISO 15886-1:2004,Agricultural irrigation equipment — Sprinklers — Part 1: Definition of terms and classification,Matériel agricole d'irrigation — Asperseurs — Partie 1: Définition des termes et classification,2004-11-08,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[53638],['en'],17,"<p>ISO 15886-1:2004 defines terms used in relation to sprinklers intended for agricultural irrigation and provides a means of classifying those sprinklers according to physical factors, characteristics of water spray, mechanism for operation and water distribution, approach to sealing, intended use, and additional functions incorporated into the sprinkler.</p>"

29483,IS,,ISO 15886-3:2004,Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods,Matériel agricole d'irrigation — Asperseurs — Partie 3: Caractérisation de la distribution et méthodes d'essai,2004-11-08,1,['65.060.35'],ISO/TC 23/SC 18,9599,[14594],[53639],['en'],15,"<p>ISO 15886-3:2004 specifies the conditions and methods used for testing and characterizing the water distribution patterns of sprinklers intended for agricultural irrigation. It deals both with indoor and outdoor, radial and full grid, tests and is organized so as to deal first with conditions common to all the tests and then with those unique to indoor and outdoor testing, r

53639,IS,,ISO 15886-3:2012,Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods,Matériel agricole d'irrigation — Asperseurs — Partie 3: Caractérisation de la distribution et méthodes d'essai,2012-09-03,2,['65.060.35'],ISO/TC 23/SC 18,9599,[29483],[78122],['en'],18,"<p>ISO 15886-3:2012 specifies the conditions and methods used for testing and characterizing the water distribution patterns of irrigation sprinklers. The term sprinkler is used in a broad generic sense and is meant to cover a wide variety of products as classified by ISO 15886-1. The specific performance measurements addressed include distribution uniformity, wetted radius, an

64137,IS,Amd,ISO 15886-3:2012/Amd 1:2016,Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods — Amendment 1,Matériel agricole d'irrigation — Asperseurs — Partie 3: Caractérisation de la distribution et méthodes d'essai — Amendement 1,2016-08-19,2,['65.060.35'],ISO/TC 23/SC 18,9599,,[78122],['en'],2,

29440,IS,,ISO 15887:2000,Space data and information transfer systems — Data systems — Lossless data compression,Systèmes de transfert des informations et données spatiales — Systèmes de données — Compression de données sans perte,2000-10-12,1,['49.140'],ISO/TC 20/SC 13,9599,,[62314],"['en','fr']",35,

52985,IS,Cor,ISO 15887:2000/Cor 1:2009,Space data and information transfer systems — Data systems — Lossless data compression — Technical Corrigendum 1,Systèmes de transfert des informations et données spatiales — Systèmes de données — Compression de données sans perte — Rectificatif technique 1,2009-05-15,1,['49.140'],ISO/TC 20/SC 13,9599,[46185],[62314],['en'],6,

29442,IS,,ISO 15889:2000,Space data and information transfer systems — Data description language — EAST specification,Systèmes de transfert des informations et données spatiales — Langage de description de données — Spécification EAST,2000-10-19,1,['49.140'],ISO/TC 20/SC 13,9599,,[36451],"['en','fr']",105,

36451,IS,,ISO 15889:2003,Space data and information transfer systems — Data description language — EAST specification,Systèmes de transfert des informations et données spatiales — Langage de description de données — Spécification EAST,2003-02-10,2,['49.140'],ISO/TC 20/SC 13,9599,[29442],[57320],['en'],115,"<p>ISO 15889:2003 specifies the requirements for the Enhanced Ada SubseT (EAST) language (CCSDS 0010) used to create descriptions of data, called data description records (DDRs). The use of this language ensures complete and exact understanding of space data as well as its automated transfer and interpretation on any host machine having the appropriate software tools. </p>"

29446,IS,,ISO 15893:2000,Space data and information transfer systems — Protocol specification for space communications — Transport protocol,Systèmes de transfert des informations et données spatiales — Spécification d'un protocole pour communications spatiales — Protocole de transport,2000-10-05,1,['49.140'],ISO/TC 20/SC 13,9599,,[45986],['en'],121,

39573,IS,,ISO 15900:2009,Determination of particle size distribution — Differential electrical mobility analysis for aerosol particles,Détermination de la distribution granulométrique — Analyse de mobilité électrique différentielle pour les particules d'aérosol,2009-05-12,1,['19.120'],ISO/TC 24/SC 4,9599,,[67600],"['en','ru']",57,"<p>ISO 15900:2009 provides guidelines on the determination of aerosol particle size distribution by means of the analysis of electrical mobility of aerosol particles. This measurement is usually called <i>“</i>differential electrical mobility analysis for aerosol particles”. This analytical method is applicable to particle size measurements ranging from approximate

39385,IS,,ISO 15901-1:2005,Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 1: Mercury porosimetry,Distribution des dimensions des pores et porosité des matériaux solides par porosimétrie au mercure et par adsorption de gaz — Partie 1: Porosimétrie au mercure,2005-12-07,1,['19.120'],ISO/TC 24/SC 4,9599,,[56005],['en'],18,"<p>ISO 15901-1:2005 describes a method for the evaluation of the pore size distribution and the specific surface in pores of solids by mercury porosimetry according to the method of Ritter and Drake. ISO 15901-1:2005 describes a comparative test, usually destructive due to mercury contamination, in which the volume of m

45628,IS,Cor,ISO 15901-1:2005/Cor 1:2007,Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 1: Mercury porosimetry — Technical Corrigendum 1,Distribution des dimensions des pores et porosité des matériaux solides par porosimétrie au mercure et par adsorption de gaz — Partie 1: Porosimétrie au mercure — Rectificatif technique 1,2007-02-28,1,['19.120'],ISO/TC 24/SC 4,9599,,[56005],['en'],1,

39386,IS,,ISO 15901-2:2006,Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of mesopores and macropores by gas adsorption,Distribution des dimensions des pores et porosité des matériaux solides par porosimétrie au mercure et par adsorption de gaz — Partie 2: Analyse des mésopores et des macropores par adsorption de gaz,2006-12-11,1,['19.120'],ISO/TC 24/SC 4,9599,,[67586],['en'],30,"<p>ISO 15901-2:2006 describes a method for the evaluation of porosity and pore size distribution by gas adsorption. It is a comparative, rather than an absolute test. The method is limited to the determination of the quantity of a gas adsorbed per

46109,IS,Cor,ISO 15901-2:2006/Cor 1:2007,Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of mesopores and macropores by gas adsorption — Technical Corrigendum 1,Distribution des dimensions des pores et porosité des matériaux solides par porosimétrie au mercure et par adsorption de gaz — Partie 2: Analyse des mésopores et des macropores par adsorption de gaz — Rectificatif technique 1,2007-05-07,1,['19.120'],ISO/TC 24/SC 4,9599,,[67586],['en'],1,

40364,IS,,ISO 15901-3:2007,Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 3: Analysis of micropores by gas adsorption,Distribution des dimensions des pores et porosité des matériaux solides par porosimétrie au mercure et par adsorption de gaz — Partie 3: Analyse des micropores par adsorption de gaz,2007-04-16,1,['19.120'],ISO/TC 24/SC 4,9599,,"[67586,67587,58074]",['en'],27,"<p>ISO 15901-3:2007 describes methods for the evaluation of the volume of micropores (pores of internal width less than 2 nm) and the specific surface area of microporous material by low-temperature adsorption of gases These are comparative, non-destructive tests.

28652,IS,,ISO 15902:2004,Optics and photonics — Diffractive optics — Vocabulary,Optique et photonique — Optique diffractive — Vocabulaire,2004-04-07,1,"['31.260','01.040.31']",ISO/TC 172/SC 9,9599,,[77771],"['en','fr']",19,<p>ISO 15902:2004 defines the basic terms for diffractive optical elements for free space propagation. The purpose of these definitions is to provide an agreed-upon common terminology that will reduce ambiguity and misunderstanding and thereby aid in the development of the field of diffractive optics.</p>

43183,IS,Cor,ISO 15902:2004/Cor 1:2005,Optics and photonics — Diffractive optics — Vocabulary — Technical Corrigendum 1,Optique et photonique — Optique diffractive — Vocabulaire — Rectificatif technique 1,2005-12-12,1,"['31.260','01.040.31']",ISO/TC 172/SC 9,9599,,[77771],"['en','fr']",2,

37646,IS,,ISO 15912:2006,Dentistry — Casting investments and refractory die materials,Art dentaire — Revêtements et matériaux pour modèles réfractaires,2006-09-27,1,['11.060.10'],ISO/TC 106/SC 2,9599,"[19227,19225,17549,19226,24011]",[63467],"['en','fr']",15,"<p>ISO 15912:2006 is applicable to dental casting, brazing and refractory investments and refractory die materials, regardless of the nature of the binding system or the particular application.</p><p>ISO 15912:2006 classifies investments into types according to their intended use and classes according to the burn-out procedure recommended by the manufacturer. </p><p>ISO 15912:2006 specifies requirements for the essential physical and me

52331,IS,Amd,ISO 15912:2006/Amd 1:2011,Dentistry — Casting investments and refractory die materials — Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials,Art dentaire — Revêtements et matériaux pour modèles réfractaires — Amendement 1: Exigence et méthode d'essai pour l'adéquation d'expansion des matériaux de Type 1 et de Type 2,2011-07-14,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[63467],"['en','fr']",3,

37647,IS,,ISO 15917:2007,Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials — Dimensions,"Fraises hémisphériques deux tailles monobloc, à queue cylindrique, en carbures métalliques et en céramique — Dimensions",2007-01-18,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[60182],"['en','fr']",3,"<p>ISO 15917:2006 specifies types and dimensions of solid ball-nose end mills, with cylindrical shanks, made of carbide and ceramic materials in accordance with ISO 513.</p>"

29546,IS,,ISO 15924:2004,Information and documentation — Codes for the representation of names of scripts,Information et documentation — Codes pour la représentation des noms d'écritures,2004-02-04,1,"['01.140.10','01.140.20']",ISO/TC 46,9599,,[81905],"['en','fr']",11,"<p>ISO 15924:2004 provides a code for the presentation of names of scripts. The codes were devised for use in terminology, lexicography, bibliography and linguistics, but they may be used for any application requiring the expression of scripts in coded form. ISO 15924:2004 also includes guidance on the use of script codes in some of these applications.</p>"

29560,IS,,ISO 15928-1:2003,Houses — Description of performance — Part 1: Structural safety,Constructions d'habitation — Description des performances — Partie 1: Sécurité de la structure,2003-12-04,1,"['91.080.01','91.040.01']",ISO/TC 59/SC 15,9599,,[62990],['en'],16,"<p>ISO 15928-1:2003 sets out a method for describing the structural safety performance of houses. It covers user needs, provides performance descriptions, establishes parameter descriptions, and outlines evaluation processes. It includes a description of permanent, imposed, wind, seismic, snow and other actions as well as structural resistance. </p><p>ISO 15928-1:2003 is intended for use in the evaluation of the design and const

37295,IS,,ISO 15928-2:2005,Houses — Description of performance — Part 2: Structural serviceability,Constructions d'habitation — Description des performances — Partie 2: Aptitude au service de la structure,2005-10-06,1,"['91.080.01','91.040.01']",ISO/TC 59/SC 15,9599,,[62991],['en'],17,"<p>ISO 15928-2:2005 sets out a method for describing the structuralserviceability performance of houses. ISO 1592-2:2005 covers user needs,provides performance descriptions, establishes parameter descriptions andoutlines evaluation processes.</p><p>ISO 15928-2:22005 is intended for use in the evaluation of the design andconstruction of houses, in the international trading of houses or theirsub-systems, and in

37296,IS,,ISO 15928-3:2009,Houses — Description of performance — Part 3: Structural durability,Constructions d'habitation — Description des performances — Partie 3: Durabilité de la structure,2009-02-09,1,"['91.080.01','91.040.01']",ISO/TC 59/SC 15,9599,,[62992],['en'],14,"<p>ISO 15928-3:2009 sets out a method for describing the structural durability performance of houses. It covers the needs of the user, provides performance descriptions, establishes parameter descriptions and outlines evaluation processes.</p><p>It is intended for use in the evaluation of the design and construction of houses, in the international trading of houses or their subsystems and in developing quality systems for

50824,IS,,ISO 15928-4:2011,Houses — Description of performance — Part 4: Fire safety,Constructions d'habitation — Description des performances — Partie 4: Sécurité au feu,2011-11-01,1,"['91.080.01','91.040.01','13.220.99']",ISO/TC 59/SC 15,9599,,[72465],['en'],16,

42876,IS,,ISO 15930-7:2008,Graphic technology — Prepress digital data exchange using PDF — Part 7: Complete exchange of printing data (PDF/X-4) and partial exchange of printing data with external profile reference (PDF/X-4p) using PDF 1.6,Technologie graphique — Échange de données numériques de préimpression utilisant le PDF — Partie 7: Échange complet de données d'impression (PDF/X-4) et échange partiel de données d'impression avec une référence de profil externe (PDF/X-4p) utilisant le PDF 1.6,2008-02-25,1,"['35.240.30','37.100.99']",ISO/TC 130,9599,,[55843],['en'],27,"<p>ISO 15930-7:2008 specifies the use of the Portable Document Format (PDF) Version 1.6 for the dissemination of digital d

42877,IS,,ISO 15930-8:2008,Graphic technology — Prepress digital data exchange using PDF — Part 8: Partial exchange of printing data using PDF 1.6 (PDF/X-5),Technologie graphique — Échange de données numériques de préimpression utilisant le PDF — Partie 8: Échange partiel de données d'impression utilisant le PDF 1.6 (PDF/X-5),2008-04-24,1,"['35.240.30','37.100.99']",ISO/TC 130,9599,,[55844],['en'],14,"<p>ISO 15930-8:2008 specifies the use of the portable document format (PDF) version 1.6 for the dissemination of digital data intended for print, where all elements necessary for final print reproduction are either included or provision is made for unique identification of externally supplied g

37667,IS,,ISO 15952:2006,Soil quality — Effects of pollutants on juvenile land snails (Helicidae) — Determination of the effects on growth by soil contamination,Qualité du sol — Effets des polluants vis-à-vis des escargots juvéniles (Helicidae) — Détermination des effets sur la croissance par contamination du sol,2006-02-27,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[70144],"['en','fr']",33,"<p>ISO 15952:2005 specifies a semi-static method for the determination of the effects of contaminants on growth and survival of young snails, usually <i>Helix aspersa</i> <i>aspersa</i> Müller. The animals are exposed via the cutaneous and digestive route using a test substrate (artificial or natural soil acc

55561,IS,,ISO 15957:2015,Test dusts for evaluating air cleaning equipment,Poussières d'essai pour l'évaluation des équipements d'épuration d'air,2015-02-25,1,['91.140.30'],ISO/TC 142,9599,,"[79599,85673]","['en','fr']",9,"<p>ISO 15957:2015 defines the properties of load test dusts used for heating, ventilation, and air conditioning (HVAC) air filters as well as air cleaning equipment in laboratories. Test dusts used for evaluation of efficiency performance are not included.</p>"

29001,IS,,ISO 15967:2000,Direct reduced iron — Determination of tumble strength of hot briquetted iron (HBI),Minerais de fer préréduits — Essai au tambour du fer briqueté à chaud,2000-08-31,1,['73.060.10'],ISO/TC 102/SC 3,9599,,[38097],['en'],7,

29002,IS,,ISO 15968:2000,Direct reduced iron — Determination of apparent density and water absorption of hot briquetted iron (HBI),Minerais de fer préréduits — Détermination de la masse volumique apparente et de l'absorption d'eau du fer briqueté à chaud,2000-09-14,1,['73.060.10'],ISO/TC 102/SC 3,9599,,"[61906,38096,66423]",['en'],8,

6189,IS,,ISO 1597:1975,Plastics — Unplasticized cellulose acetate — Determination of acetic acid yield,Matières plastiques — Acétate de cellulose non plastifié — Determination du titre en acide acétique,1975-06-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[6190],"['en','fr']",3,

6191,IS,,ISO 1598:1975,Plastics — Cellulose acetate — Determination of insoluble particles,Matières plastiques — Acétate de cellulose — Détermination des particules insolubles,1975-06-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[6192],"['en','fr']",2,

40600,IS,,ISO 15985:2004,Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas,Plastiques — Évaluation de la biodégradation anaérobie ultime et de la désintégration dans des conditions de digestion anaérobie à teneur élevée en solides — Méthode par analyse du biogaz libéré,2004-12-06,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[63366],"['en','fr']",10,<p>ISO 15985:2004 specifies a method for the evaluation of the ultimate anaerobic biodegradability of plastics based on organic compounds under high-solids anaerobic-digestion conditions by measurement of evolved biogas and the degre

50650,IS,Cor,ISO 15985:2004/Cor 1:2007,Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas — Technical Corrigendum 1,Plastiques — Évaluation de la biodégradation anaérobie ultime et de la désintégration dans des conditions de digestion anaérobie à teneur élevée en solides — Méthode par analyse du biogaz libéré — Rectificatif technique 1,2007-11-15,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[63366],"['en','fr']",1,

6193,IS,,ISO 1599:1975,Plastics — Cellulose acetate — Determination of viscosity loss on moulding,Matières plastiques — Acétate de cellulose — Perte de viscosité au moulage,1975-06-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[6194],"['en','fr']",3,

38611,IS,,ISO 15995:2006,Gas cylinders — Specifications and testing of LPG cylinder valves — Manually operated,Bouteilles à gaz — Spécifications et essais pour valves de bouteilles de GPL — Fermeture manuelle,2006-02-17,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[68471],"['en','fr']",22,"<p>ISO 15995:2005 specifies the requirements for design, specification and type testing of dedicated LPG manually operated cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. It includes references to associated equipment for vapour or liquid service.</p>"

68471,IS,,ISO 15995:2019,Gas cylinders — Specifications and testing of LPG cylinder valves — Manually operated,Bouteilles à gaz — Spécifications et essais pour valves de bouteilles de GPL — Fermeture manuelle,2019-06-03,2,['23.020.35'],ISO/TC 58/SC 2,9599,[38611],[81929],"['en','fr']",25,"<p>This document specifies the requirements for design, specification, type testing and production testing and inspection of dedicated LPG manually operated cylinder valves for use with and directly connected to transportable refillable LPG cylinders.</p><p>It also includes requirements for associated equipment for vapour and liquid service. Bursting discs and/or fusible plugs are not covered in this docume

40319,IS,,ISO 15996:2005,Gas cylinders — Residual pressure valves — General requirements and type testing,Bouteilles à gaz — Robinets à pression résiduelle — Exigences générales et essais de type,2005-04-04,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[66160],"['en','fr']",15,"<p>ISO 15996:2005 specifies requirements for residual pressure valves, with or without a non-return function, for gas cylinders and the methods of testing such valves, for type approval.</p><p>ISO 15996:2005 is applicable to valves to be fitted to gas cylinders of up to 150 l water capacity, intended to contain compressed, liquefied or dissolved gases.</p><p>ISO 15996:2005 does not cover valves for fire extinguishers, cryogeni

40405,IS,Amd,ISO 15996:2005/Amd 1:2007,Gas cylinders — Residual pressure valves — General requirements and type testing — Amendment 1,Bouteilles à gaz — Robinets à pression résiduelle — Exigences générales et essais de type — Amendement 1,2007-11-19,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[66160],"['en','fr']",1,

28559,IS,,ISO 15998:2008,Earth-moving machinery — Machine-control systems (MCS) using electronic components — Performance criteria and tests for functional safety,Engins de terrassement — Systèmes de contrôle-commande utilisant des composants électroniques — Critères et essais de performances de sécurité fonctionnelle,2008-04-02,1,['53.100'],ISO/TC 127/SC 3,9599,,"[70717,75200,80996,70718,70715,73568,62611]","['en','fr']",33,"<p>ISO 15998:2008 specifies performance criteria and tests for functional safety of safety-related machine-control systems (MCS) using electronic components in earth-moving machinery and its equipment, as defined in ISO 6165.</p>"

6195,IS,,ISO 1600:1975,Plastics — Cellulose acetate — Determination of light absorption before and after heating,Matières plastiques — Acétate de cellulose — Détermination de l'absorption de lumière avant et après chauffage,1975-06-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[6196],"['en','fr']",4,

38205,IS,,ISO 16000-11:2006,"Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens","Air intérieur — Partie 11: Dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement — Échantillonnage, conservation des échantillons et préparation d'échantillons pour essai",2006-01-30,1,['13.040.20'],ISO/TC 146/SC 6,9599,,[79023],"['en','fr']",12,"<p>Studies of the emission of volatile organic compounds from unused building products or furnishing in test chambers or cells require proper handling of the product prior to testing, a

42960,IS,,ISO 16000-23:2009,Indoor air — Part 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials,Air intérieur — Partie 23: Essai de performance pour l'évaluation de la réduction des concentrations en formaldéhyde par des matériaux de construction sorptifs,2009-12-03,1,['13.040.20'],ISO/TC 146/SC 6,9599,,[70809],"['en','fr']",28,"<p>ISO 16000-23:2009 specifies a general laboratory test method for evaluating the reduction of formaldehyde concentrations by sorptive building materials. This method applies to boards, wallpapers, carpets, paint products, and other building materials. The sorption of formaldehyde can be brought about by

44296,IS,,ISO 16000-24:2009,Indoor air — Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials,Air intérieur — Partie 24: Essai de performance pour l'évaluation de la réduction des concentrations en composés organiques volatils (sauf formaldéhyde) par des matériaux de construction sorptifs,2009-12-03,1,['13.040.20'],ISO/TC 146/SC 6,9599,,[70810],"['en','fr']",20,"<p>ISO 16000-24:2009 specifies a general laboratory test method for evaluating the reduction in concentration of volatile organic compounds (VOCs) (except formaldehyde) by sorptive building materials. This method applies to boards, wall

50005,IS,,ISO 16000-28:2012,Indoor air — Part 28: Determination of odour emissions from building products using test chambers,Air intérieur — Partie 28: Détermination des émissions d'odeurs des produits de construction au moyen de chambres d'essai,2012-03-15,1,['13.040.20'],ISO/TC 146/SC 6,9599,,[72032],"['en','fr']",37,"<p>This part of ISO 16000 specifies a laboratory test method using test chambers defined in ISO 16000-9 and</p><p>evaluation procedures for the determination of odours emitted from newly produced building products under</p><p>defined climate conditions. The method can also, in principle, be applied to aged products. This part of ISO 16000</p><p>is applicable to various test