Withdrawn and superseded ISO standards — page 5 of 246

18310,IS,,ISO 10270:1995,Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors,Corrosion des métaux et alliages — Essais de corrosion aqueuse des alliages de zirconium utilisés dans les réacteurs nucléaires,1995-12-07,1,"['27.120.10','77.060']",ISO/TC 156,9599,,[79405],"['en','fr']",11,"<p>Specifies methods for the determination of mass gain and for the surface inspection of products of zirconium and its alloys when corrosion tested in water at 360 °C or in steam at or above 400 °C. Applicable to wrought products, castings and powder metallurgical products.</p>"

29083,IS,Cor,ISO 10270:1995/Cor 1:1997,Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors — Technical Corrigendum 1,Corrosion des métaux et alliages — Essais de corrosion aqueuse des alliages de zirconium utilisés dans les réacteurs nucléaires — Rectificatif technique 1,1997-07-17,1,"['27.120.10','77.060']",ISO/TC 156,9599,,[79405],"['en','fr']",1,

23855,IS,,ISO 10271:2001,Dental metallic materials — Corrosion test methods,Produits dentaires métalliques — Méthodes pour les essais de corrosion,2001-05-31,1,['11.060.10'],ISO/TC 106/SC 2,9599,[18311],"[37256,53819]","['en','fr']",18,

41405,IS,Cor,ISO 10271:2001/Cor 1:2005,Dental metallic materials — Corrosion test methods — Technical Corrigendum 1,Produits dentaires métalliques — Méthodes pour les essais de corrosion — Rectificatif technique 1,2005-01-26,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[53819],"['en','fr']",2,

53819,IS,,ISO 10271:2011,Dentistry — Corrosion test methods for metallic materials,Médecine bucco-dentaire — Méthodes d'essai de corrosion des matériaux métalliques,2011-07-21,2,['11.060.10'],ISO/TC 106/SC 2,9599,"[41405,23855]",[73445],"['en','fr']",26,<p>ISO 10271:2011 provides test methods and procedures to determine the corrosion behaviour of metallic materials used in the oral cavity. It is intended that the test methods and procedures in ISO 10271:2011 be referred to in the individual International Standards specifying such metallic materials.</p><p>ISO 10271:2011 is not applicable to instruments and dental amalgam and appliances for orthodontics.</p>

37091,IS,,ISO 10272-1:2006,Microbiology of food and animal feeding stuffs — Horizontal method for detection and enumeration of Campylobacter spp. — Part 1: Detection method,Microbiologie des aliments — Méthode horizontale pour la recherche et le dénombrement de Campylobacter spp. — Partie 1: Méthode de recherche,2006-01-13,1,['07.100.30'],ISO/TC 34/SC 9,9599,"[18312,27218,29295]",[63225],"['en','fr']",16,"<p>ISO 10272-1:2006 describes a horizontal method for the detection of <i>Campylobacter </i>spp. </p><p>It is applicable to products intended for human consumption or for the feeding of animals, and to environmental samples in the area of food production and food handling, subject to the li

18312,IS,,ISO 10272:1995,Microbiology of food and animal feeding stuffs — Horizontal method for detection of thermotolerant Campylobacter,Microbiologie des aliments — Méthode horizontale pour la recherche de Campylobacter thermotolérants,1995-09-28,1,['07.100.30'],ISO/TC 34/SC 9,9599,,"[36535,37091,37092]","['en','fr']",15,<p>Describes a horizontal method for the detection of thermotolerant Campylobacter in food and animal feeding stuffs.</p>

27218,IS,Cor,ISO 10272:1995/Cor 1:1996,Microbiology of food and animal feeding stuffs — Horizontal method for detection of thermotolerant Campylobacter — Technical Corrigendum 1,Microbiologie des aliments — Méthode horizontale pour la recherche de Campylobacter thermotolérants — Rectificatif technique 1,1996-06-06,1,['07.100.30'],ISO/TC 34/SC 9,9599,,"[36535,37091,37092]","['en','fr']",1,"<p>Contains a great number of corrections regarding the subclauses 1, 9.5.5.1, 9.6, B.2.4.1, B.5.3.1 and B.7.3.1.</p>"

29295,IS,Cor,ISO 10272:1995/Cor 2:1997,Microbiology of food and animal feeding stuffs — Horizontal method for detection of thermotolerant Campylobacter — Technical Corrigendum 2,Microbiologie des aliments — Méthode horizontale pour la recherche de Campylobacter thermotolérants — Rectificatif technique 2,1997-07-31,1,['07.100.30'],ISO/TC 34/SC 9,9599,,"[36535,37091,37092]","['en','fr']",1,

18313,IS,,ISO 10273:1994,Microbiology — General guidance for the detection of presumptive pathogenic Yersinia enterocolitica,Microbiologie — Directives générales pour la recherche de Yersinia enterocolitica présumées pathogènes,1994-12-15,1,['07.100.01'],ISO/TC 34/SC 9,9599,,[34564],"['en','fr']",16,<p>Gives general guidance on the detection of Yersinia enterocolitica presumed to be pathogenic to man. Applicable to products for human or animal consumption.</p>

34564,IS,,ISO 10273:2003,Microbiology of food and animal feeding stuffs — Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica,Microbiologie des aliments — Méthode horizontale pour la recherche de Yersinia enterocolitica présumées pathogènes,2003-07-03,2,['07.100.30'],ISO/TC 34/SC 9,9599,[18313],[63329],"['en','fr']",31,"<p>ISO 10273:2003 specifies a horizontal method for the detection of <i>Yersinia enterocolitica</i> presumed to be pathogenic to human subjects. It is applicable to products intended for human consumption and the feeding of animals, and environmental samples in the area of food production and food handling.</p>"

18317,IS,,ISO 10275:1993,Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent,Matériaux métalliques — Tôles et bandes — Détermination du coefficient d'écrouissage à la traction,1993-02-04,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[40201],"['en','fr']",5,"<p>The principle of the test method specified is subjecting a test piece to uniaxial tensile strain at a prescribed constant rate within the region of uniform plastic strain. It is valid only for that part of the stress-strain curve in the plastic range where the curve is continuous and monotonic. The tensile strain hardening exponent is calculated either by considering a portion of the stress-strain curve in

40201,IS,,ISO 10275:2007,Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent,Matériaux métalliques — Tôles et bandes — Détermination du coefficient d'écrouissage en traction,2007-05-30,2,['77.040.10'],ISO/TC 164/SC 2,9599,[18317],[80882],"['en','fr']",10,<p>ISO 10275:2007 specifies a method for determining the tensile strain hardening exponent of flat products (sheet and strip) made of metallic materials.</p><p>The method is valid only for that part of the stress-strain curve in the plastic range where the curve is continuous and monotonic.</p>

55937,IS,,ISO 10276:2010,Nuclear energy — Fuel technology — Trunnions for packages used to transport radioactive material,Énergie nucléaire — Technologie du combustible — Tourillons pour colis de transport de matières radioactives,2010-07-23,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[70592],"['en','fr']",20,"<p>ISO 10276:2010 addresses trunnions fitted to radioactive-material transport packages that are subject to the approval and licensing by competent authorities in accordance with the IAEA No. TS-R-1. Aspects included are design, manufacture, maintenance and quality assurance.</p><p>Subject to agreement between the interested parties, ISO 10276:2010 can also be applied to packages that are not

5500,IS,,ISO 1028:1973,Information processing — Flowchart symbols,Traitement de l'information — Symboles d'organigramme,1973-12-01,1,"['01.080.50','35.080']",ISO/IEC JTC 1/SC 2,9599,,[11955],"['en','fr']",3,

18322,IS,,ISO 10280:1991,Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method,Aciers et fontes — Dosage du titane — Méthode spectrophotométrique au diantipyrylméthane,1991-05-09,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[88044],"['en','fr']",8,

18324,IS,,ISO 10282:1994,Single-use sterile surgical rubber gloves — Specification,"Gants en caoutchouc à usage chirurgical, stériles, non réutilisables — Spécification",1994-11-17,1,"['11.140','83.140.99']",ISO/TC 45/SC 4,9599,,[33620],"['en','fr']",8,<p>Specifies requirements for packaged sterile gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. Applicable to single-use gloves that are worn once and then discarded. Does not apply to examination or procedure gloves. Intended as a reference for the performance and safety of rubber surgical gloves.</p>

33620,IS,,ISO 10282:2002,Single-use sterile rubber surgical gloves — Specification,"Gants en caoutchouc à usage chirurgical, stériles, non réutilisables — Spécifications",2002-09-26,2,"['11.140','83.140.99']",ISO/TC 45/SC 4,9599,[18324],[63706],['en'],10,"<p>ISO 10282:2002 specifies requirements for packaged sterile rubber gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. It is applicable to single-use gloves that are worn once and then discarded. It does not apply to examination or procedure gloves. It covers gloves with smooth surfaces and gloves with textured surfaces over part or all of the glove.</p><p>This standard is intended

40150,IS,Cor,ISO 10282:2002/Cor 1:2005,Single-use sterile rubber surgical gloves — Specification — Technical Corrigendum 1,"Gants en caoutchouc à usage chirurgical, stériles, non réutilisables — Spécifications — Rectificatif technique 1",2005-06-22,2,"['11.140','83.140.99']",ISO/TC 45/SC 4,9599,,[63706],['en'],1,

63706,IS,,ISO 10282:2014,Single-use sterile rubber surgical gloves — Specification,"Gants en caoutchouc à usage chirurgical, stériles, non réutilisables — Spécifications",2014-01-24,3,"['11.140','83.140.99']",ISO/TC 45/SC 4,9599,"[33620,40150]",[80474],['en'],11,"<p>ISO 10282:2014 specifies requirements for packaged sterile rubber gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. It is applicable to single-use gloves that are worn once and then discarded. It does not apply to examination or procedure gloves. It covers gloves with smooth surfaces and gloves with textured surfaces over part or the whole glove.</p><p>ISO 10282:2014 is i

18325,IS,,ISO 10283:1997,Binders for paints and varnishes — Determination of monomeric diisocyanates in polyisocyanate resins,Liants pour peintures et vernis — Détermination des diisocyanates monomères dans les résines polyisocyanates,1997-11-27,1,['87.060.20'],ISO/TC 35,9599,,[44862],"['en','fr']",10,

18327,IS,,ISO 10285:1992,"Rolling bearings, linear motion, recirculating ball, sleeve type — Metric series","Roulements linéaires à recirculation de billes, type manchon — Série métrique",1992-11-12,1,['21.100.20'],ISO/TC 4/SC 11,9599,,[32465],"['en','fr']",9,"<p>Specifies the general boundary dimensions, tolerances and definitions. Applies only to the size range given in table 1 (bore diameters from 3 mm up to 100 mm).</p>"

18328,IS,,ISO 10286:1992,Gas cylinders — Terminology,Bouteilles à gaz — Terminologie,1992-11-19,1,"['23.020.35','01.040.23']",ISO/TC 58,9599,,[24950],"['en','fr']",8,

24950,IS,,ISO 10286:1996,Gas cylinders — Terminology,Bouteilles à gaz — Terminologie,1996-11-28,2,"['23.020.35','01.040.23']",ISO/TC 58,9599,[18328],"[30218,40143]","['en','fr']",19,<p>Establishes the terminology which is applicable to gas cylinders. It also gives definitions relating to pressures and gases.</p>

40143,IS,,ISO 10286:2007,Gas cylinders — Terminology,Bouteilles à gaz — Terminologie,2007-06-26,3,"['23.020.35','01.040.23']",ISO/TC 58,9599,[24950],[55978],"['en','fr']",43,"<p>ISO 10286:2007 establishes the terminology used in the field of gas cylinders. It also gives definitions relating to pressures and gases.</p><p>In addition to terms in English and French, two of the three official ISO languages, ISO 10286:2007 gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.</p>"

55978,IS,,ISO 10286:2015,Gas cylinders — Terminology,Bouteilles à gaz — Terminologie,2015-06-30,4,"['23.020.35','01.040.23']",ISO/TC 58,9599,[40143],[79732],"['de','en','fr']",49,<p>ISO 10286:2015 gives the terminology for ISO/TC 58 standards intended to be used under regulations for the transport of dangerous goods that are based on the UN Model Regulations. Variations from the terminology are permissible to comply with other regulations such as for stationary and automotive applications.</p>

79732,IS,,ISO 10286:2021,Gas cylinders — Vocabulary,Bouteilles à gaz — Vocabulaire,2021-11-11,5,"['23.020.35','01.040.23']",ISO/TC 58,9599,[55978],[84743],"['de','en','fr']",149,<p>This document defines terms for gas cylinders.</p>

18329,IS,,ISO 10287:1992,Steel for the reinforcement of concrete — Determination of strength of joints in welded fabric,Acier à béton pour armatures passives — Détermination de la résistance des joints des treillis soudés,1992-12-10,1,"['91.080.40','77.140.15']",ISO/TC 17/SC 16,9599,,"[28435,28436,28434]","['en','fr']",2,<p>The test method is based on placing and centring a test piece so that the pulling wire can move freely (the pulling wire shall be supported in such a way that it will not bend; the rate of stress increase in the pulling wire shall not exceed 10 MPa/s) and recording the maximum force during the test and the location of the fracture.</p>

18332,IS,,ISO 10290:1993,Textiles — Cotton yarns — Specifications,Textiles — Fils de coton — Spécifications,1993-10-28,1,['59.080.20'],ISO/TC 38/SC 23,9599,,"[71879,51384]",['en'],4,"<p>Specifies criteria, with relevant test methods, to be applied in describing single spun grey cotton yarns, which are widely used in international trade. Examples are given in annex A.</p>"

18334,IS,,ISO 10292:1994,Glass in building — Calculation of steady-state U values (thermal transmittance) of multiple glazing,"Verre dans la construction — Calcul du coefficient de transmission thermique U, en régime stationnaire des vitrages multiples",1994-06-30,1,['81.040.20'],ISO/TC 160,9599,,"[54112,89851,28156]","['en','fr']",8,"<p>Applies to glass, coated glass and materials opaque in the far infrared wavelengths. Gives the fundamental rules for calculating the thermal transmittance in the glazing central area (edge effects are not included). The rules are intended to enable the heat loss through glazing in a building to be estimated from the U values and, together with heat losses th

18336,IS,,ISO 10294-1:1996,Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method,Essais de résistance au feu — Clapets résistant au feu pour des systèmes de distribution d'air — Partie 1: Méthode d'essai,1996-12-19,1,"['91.140.30','13.220.50']",ISO/TC 92/SC 2,9599,,[72082],"['en','fr']",18,<p>Gives a test method for the determination of the resistance of a fire damper to heat and the passage of smoke and gases at high temperatures. The purpose is to evaluate the ability of a damper to prevent fire and smoke spreading through an air distribution system.</p>

66350,IS,Amd,ISO 10294-1:1996/Amd 1:2014,Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method — Amendment 1,Essais de résistance au feu — Clapets résistant au feu pour des systèmes de distribution d'air — Partie 1: Méthode d'essai — Amendement 1,2014-12-04,1,"['91.140.30','13.220.50']",ISO/TC 92/SC 2,9599,,[72082],['en'],1,

18337,IS,,ISO 10294-2:1999,"Fire resistance tests — Fire dampers for air distribution systems — Part 2: Classification, criteria and field of application of test results","Essais de résistance au feu — Clapets résistant au feu pour systèmes de distribution d'air — Partie 2: Classification, critères et domaine d'application des résultats d'essai",1999-04-29,1,"['91.140.30','13.220.50']",ISO/TC 92/SC 2,9599,,[72082],"['en','fr']",4,

18338,IS,,ISO 10294-3:1999,Fire resistance tests — Fire dampers for air distribution systems — Part 3: Guidance on the test method,Essais de résistance au feu — Clapets résistant au feu pour systèmes de distribution d'air — Partie 3: Lignes directrices sur la méthode d'essai,1999-04-29,1,"['91.140.30','13.220.50']",ISO/TC 92/SC 2,9599,,[72082],"['en','fr']",12,

29925,IS,,ISO 10294-4:2001,Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism,Essai de résistance au feu — Clapets résistant au feu pour systèmes de distribution d'air — Partie 4: Méthode d'essai du mécanisme de déclenchement thermique,2001-03-29,1,"['91.140.30','13.220.50']",ISO/TC 92/SC 2,9599,,[72082],['en'],12,

66351,IS,Amd,ISO 10294-4:2001/Amd 1:2014,Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism — Amendment 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen,Essai de résistance au feu — Clapets résistant au feu pour systèmes de distribution d'air — Partie 4: Méthode d'essai du mécanisme de déclenchement thermique — Amendement 1: Exigence de performance spécifique du mécanisme de déclenchement thermique fondée sur le mécanisme de déclenchement thermique utilisé dans l'éprouvette d'essai de l'ISO 10294-1,2014-12-10,1,"['91.140.30','13.220

45503,IS,,ISO 10295-1:2007,Fire tests for building elements and components — Fire testing of service installations — Part 1: Penetration seals,Essais au feu pour les éléments et composants de bâtiment — Essai au feu des installations de service — Partie 1: Joints d'étanchéité,2007-06-21,1,"['91.140.01','13.220.50']",ISO/TC 92/SC 2,9599,,[86421],"['en','ru']",14,"<p>ISO 10295-1:2007 specifies the heating condition, method of test and criteria for the evaluation of the ability of a penetration sealing system to maintain the integrity and insulation of a fire separating element at the position at which it has been penetrated, for example by a service.</p><p>ISO 10295-1:2007 assesses the effect

18342,IS,,ISO 10297:1999,Gas cylinders — Refillable gas cylinder valves — Specification and type testing,Bouteilles à gaz — Robinets de bouteilles à gaz rechargeables — Spécifications et essais de type,1999-05-06,1,"['23.020.35','23.060.40']",ISO/TC 58/SC 2,9599,,[36221],"['en','fr']",24,

36221,IS,,ISO 10297:2006,Transportable gas cylinders — Cylinder valves — Specification and type testing,Bouteilles à gaz transportables — Robinets de bouteilles — Spécifications et essais de type,2006-01-12,2,"['23.020.35','23.060.40']",ISO/TC 58/SC 2,9599,[18342],[51435],"['en','fr']",27,"<p>ISO 10297:2006 specifies valve design, production and marking requirements, and type test methods for valves intended to be fitted to gas cylinders which convey compressed, liquefied or dissolved gases.</p><p>ISO 10297:2006 does not apply to valves for cryogenic equipment, for fire extinguishers or for liquefied petroleum gas (LPG).</p><p>Additional specific requirements for valves fitted with pressure-

51435,IS,,ISO 10297:2014,Gas cylinders — Cylinder valves — Specification and type testing,Bouteilles à gaz — Robinets de bouteilles — Spécifications et essais de type,2014-07-16,3,"['23.020.35','23.060.40']",ISO/TC 58/SC 2,9599,[36221],[81026],"['en','fr','ru']",41,"<p>ISO 10297:2014 specifies design, type testing and marking requirements for:</p><p>a) cylinder valves intended to be fitted to refillable transportable gas cylinders;</p><p>b) main valves (excluding ball valves) for cylinder bundles;</p><p>c) cylinder valves or main valves with integrated pressure regulator (VIPR);</p><p>which convey compressed, liquefied or dissolved gases.</p><p>ISO 10297:2014 covers the function of

69853,IS,Amd,ISO 10297:2014/Amd 1:2017,Gas cylinders — Cylinder valves — Specification and type testing — Amendment 1: Pressure drums and tubes,Bouteilles à gaz — Robinets de bouteilles — Spécifications et essais de type — Amendement 1: Fûts à pression et tubes,2017-03-22,3,"['23.020.35','23.060.40']",ISO/TC 58/SC 2,9599,,[81026],"['en','fr']",4,

18343,IS,,ISO 10298:1995,Determination of toxicity of a gas or gas mixture,Détermination de la toxicité d'un gaz ou d'un mélange de gaz,1995-12-27,1,['71.100.20'],ISO/TC 58/SC 2,9599,,[51433],"['en','fr']",17,<p>Describes a test method for the determination of the toxicity of a gas or gas mixture in order to eliminate difficulties involved in the application of ISO 5145. A calculation method enables the toxicity of gas mixtures to be determined in the absence of valid experimental data.</p>

51433,IS,,ISO 10298:2010,Determination of toxicity of a gas or gas mixture,Détermination de la toxicité d'un gaz ou d'un mélange de gaz,2010-04-30,2,['71.100.20'],ISO/TC 58/SC 2,9599,[18343],[69935],['en'],13,<p>ISO 10298:2010 lists the best available acute-toxicity data of gases from the literature to allow the classification of gases and gas mixtures. </p>

22639,IS,,ISO 10300-1:2001,Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors,Calcul de la capacité de charge des engrenages coniques — Partie 1: Introduction et facteurs généraux d'influence,2001-07-26,1,['21.200'],ISO/TC 60/SC 2,9599,,[51705],"['en','fr']",49,

51705,IS,,ISO 10300-1:2014,Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors,Calcul de la capacité de charge des engrenages coniques — Partie 1: Introduction et facteurs généraux d'influence,2014-03-17,2,['21.200'],ISO/TC 60/SC 2,9599,[22639],[79401],['en'],58,"<p>ISO 10300-1:2014 specifies the methods of calculation of the load capacity of bevel gears, the formulae and symbols used for calculation, and the general factors influencing load conditions.</p><p>The formulae are intended to establish uniformly acceptable methods for calculating the pitting resistance and bending strength of straight, helical (skew), spiral bevel, Zerol and hypoid gea

22641,IS,,ISO 10300-2:2001,Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting),Calcul de la capacité de charge des engrenages coniques — Partie 2: Calcul de la résistance à la pression superficielle (formation des piqûres),2001-07-26,1,['21.200'],ISO/TC 60/SC 2,9599,,[51704],"['en','fr']",17,

51704,IS,,ISO 10300-2:2014,Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting),Calcul de la capacité de charge des engrenages coniques — Partie 2: Calcul de la résistance à la pression superficielle (formation des piqûres),2014-03-17,2,['21.200'],ISO/TC 60/SC 2,9599,[22641],[79402],['en'],30,"<p>ISO 10300-2:2014 specifies the basic formulae for use in the determination of the surface load capacity of straight and helical (skew), Zerol and spiral bevel gears including hypoid gears, and comprises all the influences on surface durability for which quantitative assessments can be made. ISO 10300-2:2014 is applicable to oil lubricated bevel gears, as

22642,IS,,ISO 10300-3:2001,Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength,Calcul de la capacité de charge des engrenages coniques — Partie 3: Calcul de la résistance du pied de dent,2001-08-02,1,['21.200'],ISO/TC 60/SC 2,9599,,[51703],"['en','fr']",37,

51703,IS,,ISO 10300-3:2014,Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength,Calcul de la capacité de charge des engrenages coniques — Partie 3: Calcul de la résistance du pied de dent,2014-03-17,2,['21.200'],ISO/TC 60/SC 2,9599,[22642],[79403],['en'],41,"<p>ISO 10300-3:2014 specifies the fundamental formulae for use in the tooth root stress calculation of straight and helical (skew), Zerol and spiral bevel gears including hypoid gears, with a minimum rim thickness under the root of 3,5 <i>m</i>_mn. All load influences on tooth root stress are included, insofar as they are the result of load transmitted by the gearing and able to be evaluated

53963,IS,,ISO 10302-1:2011,Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement,Acoustique — Mesurage du bruit aérien émis et des vibrations de structure induites par les petits équipements de ventilation — Partie 1: Mesurage du bruit aérien,2011-01-06,1,"['23.120','17.140.20']",ISO/TC 43/SC 1,9599,[18346],"[74055,81906]",['en'],37,"<p>ISO 10302-1:2011 specifies methods for measuring the airborne noise emitted by small air-moving devices (AMDs), such as those used for cooling electronic, electrical, and mechanical equipment where the sound power level of the AMD is of interest. </p><p>Examples

18346,IS,,ISO 10302:1996,Acoustics — Method for the measurement of airborne noise emitted by small air-moving devices,Acoustique — Méthode de mesurage du bruit aérien émis par les petits équipements de ventilation,1996-12-26,1,"['23.120','17.140.20']",ISO/TC 43/SC 1,9599,,[53963],"['en','fr']",23,"<p>Contains a method for measuring the airborne noise emitted by small air-moving devices such as those used for cooling electronic, electrical and mechanical equipment. Applicable to up to an airflow of one cubic metre per second and up to a fan static pressure of 750 Pa. Suitable for type tests; provides a method for manufacturers and testing laboratories to obtain comparable results.</p>" 18348,

20579,IS,,ISO 10303-1:1994,Industrial automation systems and integration — Product data representation and exchange — Part 1: Overview and fundamental principles,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 1: Aperçu et principes fondamentaux,1994-12-15,1,['25.040.40'],ISO/TC 184/SC 4,9599,,"[56424,72237]",['en'],17,"La présente partie de l'ISO 10303 fournit une vue générale de la Norme internationale ISO 10303. La présente Norme internationale fournit une représentation de l'information relative au produit ainsi que les mécanismes et définitions nécessaires pour permettre l'échange de données de produit. L'échange est réal

72237,IS,,ISO 10303-1:2021,Industrial automation systems and integration — Product data representation and exchange — Part 1: Overview and fundamental principles,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 1: Aperçu et principes fondamentaux,2021-03-16,2,['25.040.40'],ISO/TC 184/SC 4,9599,[20579],[83105],['en'],24,"<p>This document provides an overview of ISO 10303.</p><p>ISO 10303 provides a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged. The exchange is among different computer systems and environments associated with the complete product l

20591,IS,,ISO 10303-101:1994,Industrial automation systems and integration — Product data representation and exchange — Part 101: Integrated application resources: Draughting,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 101: Ressources d'application intégrées: Dessins techniques,1994-12-22,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[51296],['en'],46,"La présente partie de l'ISO 10303 spécifie les ressources élémentaires relatives à la représentation des informations propres aux dessins techniques. Les éléments suivants font partie du domaine d'application de la présente partie de l'ISO 10303 : <ul><li>l'information relative à la

31401,IS,Cor,ISO 10303-101:1994/Cor 1:1999,Industrial automation systems and integration — Product data representation and exchange — Part 101: Integrated application resources: Draughting — Technical Corrigendum 1,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 101: Ressources d'application intégrées: Dessins techniques — Rectificatif technique 1,1999-04-29,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[51296],['en'],4,

51296,IS,,ISO 10303-101:2011,Industrial automation systems and integration — Product data representation and exchange — Part 101: Integrated application resource: Draughting,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 101: Ressources d'application intégrées: Dessins techniques,2011-12-14,2,['25.040.40'],ISO/TC 184/SC 4,9599,"[31401,20591]",[63284],['en'],8,"<div><p>ISO 10303-101:2011 specifies the integrated resource constructs forDraughting. </p><p>ISO 10303-101:2011 establishes the resource structures, entities andrelationships necessary for the accommodations, preservation and exchange ofproduct definition data supporti

63284,IS,,ISO 10303-101:2014,Industrial automation systems and integration — Product data representation and exchange — Part 101: Integrated application resource: Draughting,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 101: Ressources d'application intégrées: Dessins techniques,2014-12-02,3,['25.040.40'],ISO/TC 184/SC 4,9599,[51296],[76134],['en'],11,"<p>ISO 10303-101:2014 specifies the integrated resource constructs for draughting. </p> <p> ISO 10303-101:2014 establishes the resource structures, entities and relationships necessary for the accommodations, preservation and excha

76134,IS,,ISO 10303-101:2018,Industrial automation systems and integration — Product data representation and exchange — Part 101: Integrated application resource: Draughting,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 101: Ressources d'application intégrées: Dessins techniques,2018-12-18,4,['25.040.40'],ISO/TC 184/SC 4,9599,[63284],[78587],['en'],11,"<p>ISO 10303-101:2018-11 specifies the integrated resource constructs for Draughting. </p> <p> ISO 10303-101 establishes the resource structures, entities and relationships necessary for the accommodations, preservation and exchang

78587,IS,,ISO 10303-101:2019,Industrial automation systems and integration — Product data representation and exchange — Part 101: Integrated application resource: Draughting,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 101: Ressources d'application intégrées: Dessins techniques,2019-11-15,5,['25.040.40'],ISO/TC 184/SC 4,9599,[76134],[84679],['en'],11,"<p>ISO 10303-101:2019 specifies the integrated resource constructs for Draughting. </p> <p> ISO 10303-101 establishes the resource structures, entities and relationships necessary for the accommodations, preservation and exchange o

84679,IS,,ISO 10303-101:2022,Industrial automation systems and integration — Product data representation and exchange — Part 101: Integrated application resource: Draughting,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 101: Ressources d'application intégrées: Dessins techniques,2022-12-19,6,['25.040.40'],ISO/TC 184/SC 4,9599,[78587],[91388],['en'],11,"<p>ISO 10303-101 specifies the integrated resource constructs for Draughting.</p><p>ISO 10303-101 establishes the resource structures, entities and relationships necessary for the accommodations, preservation and exchange of product definition data supporting the draughting fu

20594,IS,,ISO 10303-105:1996,Industrial automation systems and integration — Product data representation and exchange — Part 105: Integrated application resource: Kinematics,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 105: Ressource d'application intégrée: Cinématique,1996-12-19,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[64294],['en'],144,"<p>Describes an information model for the kinematic aspects of a mechanical product as required for the communication between CAD systems and kinematic analysis systems, and among dissimilar kinematic analysis systems.</p>"

33585,IS,Cor,ISO 10303-105:1996/Cor 1:2000,Industrial automation systems and integration — Product data representation and exchange — Part 105: Integrated application resource: Kinematics — Technical Corrigendum 1,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 105: Ressource d'application intégrée: Cinématique — Rectificatif technique 1,2000-02-24,1,['35.240.20'],ISO/TC 184/SC 4,9599,,[64294],['en'],10,

34604,IS,Cor,ISO 10303-105:1996/Cor 2:2000,Industrial automation systems and integration — Product data representation and exchange — Part 105: Integrated application resource: Kinematics — Technical Corrigendum 2,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 105: Ressource d'application intégrée: Cinématique — Rectificatif technique 2,2000-10-19,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[64294],['en'],7,

64294,IS,,ISO 10303-105:2014,Industrial automation systems and integration — Product data representation and exchange — Part 105: Integrated application resource: Kinematics,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 105: Ressource d'application intégrée: Cinématique,2014-12-02,2,['25.040.40'],ISO/TC 184/SC 4,9599,"[34604,20594,33585]",[78589],['en'],11,<p>ISO 10303-105:2014 specifies the integrated resource constructs for kinematics. </p> <p> ISO 10303-105:2014 specifies an information model for the kinematic aspects of a mechanical product as required for the commun

39607,IS,,ISO 10303-107:2006,Industrial automation systems and integration — Product data representation and exchange — Part 107: Integrated application resource — Finite element analysis definition relationships,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 107: Ressources d'application intégrées — Rapports entre les définitions d'analyses des éléments finis,2006-10-19,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[78590],['en'],32,"<p>ISO 10303-107:2006 specifies the association between idealised concepts within a finite element analysis and the design definitions of those concepts. The concepts that are idealised

18348,IS,,ISO 10303-11:1994,Industrial automation systems and integration — Product data representation and exchange — Part 11: Description methods: The EXPRESS language reference manual,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 11: Méthodes de description: Manuel de référence du langage EXPRESS,1994-12-22,1,['25.040.40'],ISO/TC 184/SC 4,9599,,"[38047,32952]",['en'],208,"La présente partie de l'ISO 10303 définit un langage de modélisation des données de produits. Ce langage s'appelle EXPRESS. La présente partie de l'ISO 10303 définit également une représentation graphique d'un sous-ensemble du langage EXPRESS. Cette repr

31820,IS,Cor,ISO 10303-11:1994/Cor 1:1999,Industrial automation systems and integration — Product data representation and exchange — Part 11: Description methods: The EXPRESS language reference manual — Technical Corrigendum 1,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 11: Méthodes de description: Manuel de référence du langage EXPRESS — Rectificatif technique 1,1999-08-05,1,['25.040.40'],ISO/TC 184/SC 4,9599,,"[38047,32952]",['en'],5,

76135,IS,,ISO 10303-113:2020,Industrial automation systems and integration — Product data representation and exchange — Part 113: Integrated application resource: Mechanical features,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 113: Ressources d'application intégrées: Caractéristiques mécaniques,2020-10-02,1,['25.040.40'],ISO/TC 184/SC 4,9599,[64300],[84680],['en'],20,"<p>This document specifies the integrated resource constructs for Mechanical features. </p> <p> The following are within the scope of this document: </p> <ul> <li>constrain

84680,IS,,ISO 10303-113:2022,Industrial automation systems and integration — Product data representation and exchange — Part 113: Integrated application resource: Mechanical features,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 113: Ressources d'application intégrées: Caractéristiques mécaniques,2022-12-19,2,['25.040.40'],ISO/TC 184/SC 4,9599,[76135],[91389],['en'],11,"<p>This document specifies the integrated resource constructs for Mechanical features.</p><p>The following are within the scope of this document:</p><ul><li>constraints on life cycle context invariant identifiers for topological items;</li><li>counterbore, co

20595,IS,,ISO 10303-201:1994,Industrial automation systems and integration — Product data representation and exchange — Part 201: Application protocol: Explicit draughting,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 201: Protocole d'application: Dessin technique explicite,1994-12-22,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[57620],['en'],476,"La présente partie de l'ISO 10303 spécifie l'utilisation des ressources intégrées nécessaires au domaine d'application et aux prescriptions d'information relatives au dessin technique explicite. <br/><br/>NOTE : Le modèle d'application d'activité décrit à l'annexe F fournit une représent

20596,IS,,ISO 10303-202:1996,Industrial automation systems and integration — Product data representation and exchange — Part 202: Application protocol: Associative draughting,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 202: Protocole d'application: Dessin technique associatif,1996-12-26,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[57620],['en'],712,"<p>Specifies the use of the integrated resources necessary for the scope and information requirements for associative draughting and provides for the inter-organization exchange of computer-interpretable drawing information and associated product definition data. Defines the structur

20597,IS,,ISO 10303-203:1994,Industrial automation systems and integration — Product data representation and exchange — Part 203: Application protocol: Configuration controlled 3D designs of mechanical parts and assemblies,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 203: Protocole d'application: Conceptions 3D contrôlées de configuration des pièces mécaniques et des assemblages,1994-12-22,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[39522],['en'],581,"<p>L’ISO 10303-203:1994 spécifie le protocole d’application pour la<b/> conception 3D de pièces mécaniques et d’assemblages avec gestion de configuration. Les éléments suivants fig

34177,IS,Amd,ISO 10303-203:1994/Amd 1:2000,Industrial automation systems and integration — Product data representation and exchange — Part 203: Application protocol: Configuration controlled 3D designs of mechanical parts and assemblies — Amendment 1,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 203: Protocole d'application: Conceptions 3D contrôlées de configuration des pièces mécaniques et des assemblages — Amendement 1,2000-12-21,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[39522],['en'],330,

26904,IS,Cor,ISO 10303-203:1994/Cor 1:1996,Industrial automation systems and integration — Product data representation and exchange — Part 203: Application protocol: Configuration controlled 3D designs of mechanical parts and assemblies — Technical Corrigendum 1,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 203: Protocole d'application: Conceptions 3D contrôlées de configuration des pièces mécaniques et des assemblages — Rectificatif technique 1,1996-03-21,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[39522],['en'],1,<p>Replaces the edition of ISO 10303-203:1994.</p>

30943,IS,Cor,ISO 10303-203:1994/Cor 2:1998,Industrial automation systems and integration — Product data representation and exchange — Part 203: Application protocol: Configuration controlled 3D designs of mechanical parts and assemblies — Technical Corrigendum 2,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 203: Protocole d'application: Conceptions 3D contrôlées de configuration des pièces mécaniques et des assemblages — Rectificatif technique 2,1998-12-17,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[39522],['en'],32,

40190,IS,Cor,ISO 10303-203:1994/Cor 3:2004,Industrial automation systems and integration — Product data representation and exchange — Part 203: Application protocol: Configuration controlled 3D designs of mechanical parts and assemblies — Technical Corrigendum 3,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 203: Protocole d'application: Conceptions 3D contrôlées de configuration des pièces mécaniques et des assemblages — Rectificatif technique 3,2004-02-09,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[39522],['en'],2,

44305,IS,,ISO 10303-203:2011,Industrial automation systems and integration — Product data representation and exchange — Part 203: Application protocol: Configuration controlled 3D design of mechanical parts and assemblies,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 203: Protocole d'application: Conception 3D contrôlée de configuration des pièces mécaniques et des assemblages,2011-04-20,2,['25.040.40'],ISO/TC 184/SC 4,9599,[39522],[57620],['en'],400," <p>ISO 10303-203:2011 specifies the application protocol for Configuration control 3d design ed2. </p> <p> The following are within the s

34451,IS,,ISO 10303-204:2002,Industrial automation systems and integration — Product data representation and exchange — Part 204: Application protocol: Mechanical design using boundary representation,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 204: Protocole d'application: Conception mécanique utilisant une représentation délimitée,2002-08-29,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[57620],['en'],258,"<p>ISO 10303-204:2002 specifies the use of the integrated resources necessary for the scope and information requirements for the use and exchange of boundary representation solid models in the mechanical engineering design cont

25092,IS,,ISO 10303-209:2001,Industrial automation systems and integration — Product data representation and exchange — Part 209: Application protocol: Composite and metallic structural analysis and related design,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 209: Protocole d'application: Analyse structurelle composite et métallique et conception associée,2001-10-11,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[59780],['en'],966,

20580,IS,,ISO 10303-21:1994,Industrial automation systems and integration — Product data representation and exchange — Part 21: Implementation methods: Clear text encoding of the exchange structure,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 21: Méthodes de mise en application: Encodage en texte clair des fichiers d'échange,1994-12-15,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[33713],['en'],57,<p>Specifies an exchange structure format using a clear text encoding of product data for which the conceptual model is specified in the EXPRESS language. The file format is suitable for the transfer of product data among computer system

27380,IS,Cor,ISO 10303-21:1994/Cor 1:1996,Industrial automation systems and integration — Product data representation and exchange — Part 21: Implementation methods: Clear text encoding of the exchange structure — Technical Corrigendum 1,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 21: Méthodes de mise en application: Encodage en texte clair des fichiers d'échange — Rectificatif technique 1,1996-08-22,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[33713],['en'],20,"<p>Modifies the text of ISO 10303-21:1994. Involves changes, corrections, clarifications and editorial modifications.</p>"

33713,IS,,ISO 10303-21:2002,Industrial automation systems and integration — Product data representation and exchange — Part 21: Implementation methods: Clear text encoding of the exchange structure,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 21: Méthodes de mise en application: Encodage en texte clair des fichiers d'échange,2002-01-24,2,['25.040.40'],ISO/TC 184/SC 4,9599,"[27380,20580]",[63141],['en'],72,

34748,IS,,ISO 10303-210:2001,"Industrial automation systems and integration — Product data representation and exchange — Part 210: Application protocol: Electronic assembly, interconnection, and packaging design","Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 210: Protocole d'application: Interconnexions électroniques, assemblage, et conception d'emballage",2001-06-07,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[43363],['en'],4515,

43363,IS,,ISO 10303-210:2011,"Industrial automation systems and integration — Product data representation and exchange — Part 210: Application protocol: Electronic assembly, interconnect, and packaging design","Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 210: Protocole d'application: Conception de l'emballage, de l'interconnexion et de l'assemblage électronique",2011-04-20,2,['25.040.40'],ISO/TC 184/SC 4,9599,[34748],[64549],['en'],400,"<div><p>ISO 10303-210:2011 specifies the use of ISO 10303 integrated resources thatsatisfy the information sharing requirements for design engineers, devicedesign engineers, value added eng

64549,IS,,ISO 10303-210:2014,"Industrial automation systems and integration — Product data representation and exchange — Part 210: Application protocol: Electronic assembly, interconnect and packaging design","Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 210: Protocole d'application: Conception de l'emballage, de l'interconnexion et de l'assemblage électronique",2014-12-01,3,['25.040.40'],ISO/TC 184/SC 4,9599,[43363],[72406],['en'],11,"<p>ISO 10303-210:2014 specifies the use of ISO 10303 integrated resources that satisfy the information sharing requirements for design engineers, device design engineers, value added

23643,IS,,ISO 10303-214:2001,Industrial automation systems and integration — Product data representation and exchange — Part 214: Application protocol: Core data for automotive mechanical design processes,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 214: Protocole d'application: Données de base pour la construction automobile,2001-03-01,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[38727],['en'],3496,

38727,IS,,ISO 10303-214:2003,Industrial automation systems and integration — Product data representation and exchange — Part 214: Application protocol: Core data for automotive mechanical design processes,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 214: Protocole d'application: Données de base pour la construction automobile,2003-12-09,2,['25.040.40'],ISO/TC 184/SC 4,9599,[23643],[43669],['en'],3529,"<p>ISO 10303-214:2003 specifies the use of the integrated resources necessary for the scope and information requirements for the exchange of information between the applications that support the development process of the mech

43669,IS,,ISO 10303-214:2010,Industrial automation systems and integration — Product data representation and exchange — Part 214: Application protocol: Core data for automotive mechanical design processes,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 214: Protocole d'application: Données de base pour la construction automobile,2010-04-12,3,['25.040.40'],ISO/TC 184/SC 4,9599,[38727],[57620],['en'],225,<p>ISO 10303-214:2010 specifies the use of the integrated resources necessary for the scope and information requirements for the exchange of information between the applications that support the development process of the mechan

25090,IS,,ISO 10303-224:1999,Industrial automation systems and integration — Product data representation and exchange — Part 224: Application protocol: Mechanical product definition for process planning using machining features,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 224: Protocole d'application: Définition de produits mécaniques pour la planification de procédés utilisant des caractéristiques d'usinage,1999-12-16,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[32336],['en'],932,

32336,IS,,ISO 10303-224:2001,Industrial automation systems and integration — Product data representation and exchange — Part 224: Application protocol: Mechanical product definition for process planning using machining features,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 224: Protocole d'application: Définition de produits mécaniques pour la planification de procédés utilisant des caractéristiques d'usinage,2001-05-03,2,['25.040.40'],ISO/TC 184/SC 4,9599,[25090],[36000],['en'],1066,

25086,IS,,ISO 10303-227:2001,Industrial automation systems and integration — Product data representation and exchange — Part 227: Application protocol: Plant spatial configuration,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 227: Protocole d'application: Configuration spatiale d'usine,2001-03-22,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[34006],['en'],1299,

44144,IS,,ISO 10303-235:2009,Industrial automation systems and integration — Product data representation and exchange — Part 235: Application protocol: Engineering properties for product design and verification,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 235: Protocole d'application: Propriétés d'ingénierie pour la conception de produits et vérification,2009-08-20,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[74409],['en'],712,"<p>ISO 10303-235:2009 specifies the use of the integrated resources necessary for the scope and information requirements for the representation of engineering property data that are used for product design

60282,IS,Cor,ISO 10303-235:2009/Cor 1:2011,Industrial automation systems and integration — Product data representation and exchange — Part 235: Application protocol: Engineering properties for product design and verification — Technical Corrigendum 1,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 235: Protocole d'application: Propriétés d'ingénierie pour la conception de produits et vérification — Rectificatif technique 1,2011-09-23,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[74409],['en'],230,

38036,IS,,ISO 10303-238:2007,Industrial automation systems and integration — Product data representation and exchange — Part 238: Application protocol: Application interpreted model for computerized numerical controllers,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 238: Protocole d'application: Modèle d'application interprété pour des contrôleurs numériques informatisés,2007-04-30,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[72030],['en'],1604,"<p>ISO 10303-238:2007 specifies an application interpreted model (AIM) based on the application reference model for machining defined by ISO 14649-10, ISO 14649-11, ISO 14649-12, ISO 14649

72030,IS,,ISO 10303-238:2020,Industrial automation systems and integration — Product data representation and exchange — Part 238: Application protocol: Model based integrated manufacturing,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 238: Protocole d'application: Fabrication intégrée basée sur le modèle,2020-11-26,2,['25.040.40'],ISO/TC 184/SC 4,9599,[38036],[84898],['en'],1269,"<div id='MathJax_Message' style='display: none;'></div><p>This document specifies an application interpreted model (AIM) based on the application reference model for machining defined by ISO 14649-10, ISO 14649-11, ISO 14649-12, ISO 14649-111 and IS

38310,IS,,ISO 10303-239:2005,Industrial automation systems and integration — Product data representation and exchange — Part 239: Application protocol: Product life cycle support,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 239: Protocole d'application: Cycle de vie du produit,2005-10-03,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[54791],['en'],65,"<p>ISO 10303-239:2005 specifies the application protocol for Product life cycle support. </p> <p> The following are within the scope of ISO 10303-239:2005: </p> <ul><li> information for defin

54791,IS,,ISO 10303-239:2012,Industrial automation systems and integration — Product data representation and exchange — Part 239: Application protocol: Product life cycle support,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 239: Protocole d'application: Cycle de vie du produit,2012-11-13,2,['25.040.40'],ISO/TC 184/SC 4,9599,[38310],"[70696,78832]",['en'],800,"<p>ISO 10303-239:2012 specifies the application protocol for Product life cycle support. </p><p> The following are within the scope of ISO 10303-239:2012: </p><ul> <li> information for

57620,IS,,ISO 10303-242:2014,Industrial automation systems and integration — Product data representation and exchange — Part 242: Application protocol: Managed model-based 3D engineering,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 242: Protocole d'application: Gestion des modèles 3D d'ingénierie,2014-12-01,1,['25.040.40'],ISO/TC 184/SC 4,9599,"[20596,43669,44305,34451,20595]",[66654],['en'],11,"<p>ISO 10303-242:2014 specifies the application protocol for Managed model based 3d engineering. </p> <p> The following are within the scope of ISO 10303-242:2014:

72059,IS,Cor,ISO 10303-242:2014/Cor 1:2016,Industrial automation systems and integration — Product data representation and exchange — Part 242: Application protocol: Managed model-based 3D engineering — Technical Corrigendum 1,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 242: Protocole d'application: Gestion des modèles 3D d'ingénierie — Rectificatif technique 1,2016-07-26,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[66654],['en'],2,

66654,IS,,ISO 10303-242:2020,Industrial automation systems and integration — Product data representation and exchange — Part 242: Application protocol: Managed model-based 3D engineering,Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 242: Protocole d'application: Gestion des modèles 3D d'ingénierie,2020-04-27,2,['25.040.40'],ISO/TC 184/SC 4,9599,"[57620,72059]",[84667],['en'],11,"<p>This document specifies the application module for AP242 managed model based 3D engineering. </p> <p> The following are within the scope of this document: </p> <ul> <li>