Withdrawn and superseded ISO standards — page 242 of 246

46280,TS,,ISO/TS 16634-2:2009,"Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content — Part 2: Cereals, pulses and milled cereal products","Produits alimentaires - Détermination de la teneur en azote total par combustion selon le principe Dumas et calcul de la teneur en protéines brutes — Partie 2: Céréales, légumineuses et produits céréaliers de mouture",2009-09-29,1,"['67.050','67.060']",ISO/TC 34,9599,,[66661],"['en','fr','ru']",25,"<p>ISO/TS 16634-2:2009 specifies a method for the determination of the total nitrogen content and the calculation of the crude protein content of cereals, pulses

40235,TS,,ISO/TS 16649-3:2005,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli — Part 3: Most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide,Microbiologie des aliments — Méthode horizontale pour le dénombrement des Escherichia coli beta-glucuronidase positive — Partie 3: Technique du nombre le plus probable utilisant le bromo-5-chloro-4-indolyl-3 beta-D-glucuronate,2005-09-15,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[56824],"['en','fr']",8,"<p>ISO/TS 16649-3:2005 specifies a horizontal method for the enumeration of beta-glucuronidase-positive <i>Escherichia coli</i>, by means of t

57450,TS,,ISO/TS 16697:2012,Space systems — Safety and compatibility of materials - Method to determine the flammability thresholds of materials,Systèmes spatiaux — Sécurité et compatibilité des matériaux — Méthode de détermination des seuils d'inflammabilité des matériaux,2012-07-31,1,"['13.220.40','49.025.01','49.140']",ISO/TC 20/SC 14,9599,,[81188],['en'],8,"<p>ISO/TS 16697:2012 provides a method to determine the oxygen concentration threshold when a material exposed to a standard ignition source self-extinguishes at a given constant total pressure, temperature, convective flow, and gravity-level conditions. The method can also be used to determine other flammability limits, such as the t

37654,TS,,ISO/TS 16732:2005,Fire safety engineering — Guidance on fire risk assessment,Ingénierie de la sécurité incendie — Lignes directrices pour l'évaluation du risque incendie,2005-09-12,1,['13.220.01'],ISO/TC 92/SC 4,9599,,[54789],"['en','fr','ru']",22,"<p>ISO/TS 16732:2005 provides the conceptual basis for fire risk assessment by stating the principles underlying the quantification and interpretation of fire-related risk. These fire risk principles apply to all fire-related phenomena and all end-use configurations, which means these principles can be applied to all types of fire scenarios.</p><p>ISO/TS 16732:2005 is designed as a guide for future documents that provide formal procedure

63142,TS,,ISO/TS 16733-2:2021,Fire safety engineering — Selection of design fire scenarios and design fires — Part 2: Design fires,Ingénierie de la sécurité incendie — Sélection de scénarios d'incendie et de feux de dimensionnement — Partie 2: Feu de dimensionnement,2021-05-14,1,['13.220.01'],ISO/TC 92/SC 4,9599,[37655],[91846],"['en','fr']",52,<p>This document provides guidance for the specification of design fires for use in fire safety engineering analysis of building and structures in the built environment. The design fire is intended to be used in an engineering analysis to determine consequences in fire safety engineering (FSE) analyses.</p>

37655,TS,,ISO/TS 16733:2006,Fire safety engineering — Selection of design fire scenarios and design fires,Ingénierie de la sécurité contre l'incendie — Sélection de scénarios d'incendie de dimensionnement et de feux de dimensionnement,2006-07-07,1,['13.220.01'],ISO/TC 92/SC 4,9599,,"[63142,63143,63140]","['en','fr']",36,"<p>ISO/TS 16733:2006 describes a methodology for the selection of design fire scenarios and design fires that are credible but conservative for use in deterministic fire safety engineering analyses of any built environment including buildings, structures or transportation vehicles.</p><p>The selection of design fire scenarios is tailored to the fire-safety design objectives,

64272,TS,,ISO/TS 16751:2018,Soil quality — Environmental availability of non-polar organic compounds — Determination of the potential bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing agent,Qualité du sol — Disponibilité environnementale des composés organiques non polaires — Détermination de la fraction potentiellement biodisponible et de la fraction non biodisponible en utilisant un agent adsorbant fort ou un agent complexant,2018-04-13,1,['13.080.30'],ISO/TC 190/SC 7,9599,,[78022],"['en','fr']",16,"<p>ISO/TS 16751:2018 specifies an extraction method to determine the bioavailable (potential and environmental available) fraction and the non-bioav

57687,TS,,ISO/TS 16774-1:2017,Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 1: Test method for thermal stability,Méthodes d'essai pour matériaux de réparation pour fissures dues à l'eau dans les structures en béton — Partie 1: Méthode d'essai de la stabilité thermique,2017-05-22,1,['91.080.40'],ISO/TC 71/SC 7,9599,,[83506],['en'],17,"<p>ISO/TS 16774-1:2017 specifies a laboratory test method for evaluating the thermal stress resistance of water-leakage crack repair materials through permeability testing.</p><p>The repair material injected into a test specimen with an artificial crack is thermally stressed under the applied temperature con

61477,TS,,ISO/TS 16774-2:2016,Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 2: Test method for chemical resistance,Méthodes d'essai pour matériaux de réparation pour fissures dues à l'eau dans les structures en béton souterraines — Partie 2: Méthode d'essai de la résistance chimique,2016-07-22,1,['91.080.40'],ISO/TC 71/SC 7,9599,,[81002],['en'],8,<p>ISO/TS 17774-2:2016 specifies a laboratory test method for the qualitative determination of the retention level of chemical resistance of repair materials in repaired cracks of concrete structures in conditions where the material is either underwater or in contact with water that may have var

61478,TS,,ISO/TS 16774-3:2016,Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 3: Test method for water (wash out) resistance,Méthodes d'essai pour matériaux de réparation pour fissures dues à l'eau dans les structures en béton souterraines — Partie 3: Méthode d'essai de la résistance à l'eau (de lixiviation),2016-07-22,1,['91.080.40'],ISO/TC 71/SC 7,9599,,[81003],['en'],8,<p>ISO/TS 16774-3:2016 specifies a laboratory test method on the quantitative determination of repair material's performance and resistance against erosion and wash out due to underground water flow.</p>

61479,TS,,ISO/TS 16774-4:2016,Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 4: Test method for adhesion on wet concrete surface,Méthodes d'essai pour matériaux de réparation pour fissures dues à l'eau dans les structures en béton souterraines — Partie 4: Méthode d'essai de l'adhésion sur un substrat humide,2016-07-22,1,['91.080.40'],ISO/TC 71/SC 7,9599,,[81004],['en'],12,"<p>ISO/TS 16774:2016 specifies a laboratory test method for indirectly measuring the adhesion performance of repair material to wet concrete crack surfaces by qualitatively, as a pass/fail at predetermined time, against predetermined amount of weight exerted on the repa

61480,TS,,ISO/TS 16774-5:2017,Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 5: Test method for watertightness,Méthodes d'essai pour matériaux de réparation pour fissures dues à l'eau dans les structures en béton — Partie 5: Méthode d'essai de l'étanchéité à l'eau,2017-05-22,1,['91.080.40'],ISO/TC 71/SC 7,9599,,[83507],['en'],15,"<p>ISO/TS 16774-5:2017 specifies a laboratory test method for evaluating watertightness of water-leakage crack repair materials through permeability testing.</p><p>These permeability test procedures follow applied conditions outlined in different national testing parameters and requirements. As such, the results

61481,TS,,ISO/TS 16774-6:2017,Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 6: Test method for response to the substrate movement,Méthodes d'essai pour matériaux de réparation pour fissures dues à l'eau dans les structures en béton — Partie 6: Méthode d'essai de la réponse aux mouvements du substrat,2017-05-22,1,['91.080.40'],ISO/TC 71/SC 7,9599,,[83508],['en'],15,"<p>ISO/TS 16774-6:2017 specifies a laboratory test method for evaluating the substrate (crack) movement response of water-leakage crack repair materials through permeability testing.</p><p>The repair material injected into a test specimen with an artificial crack undergoes sim

52517,TS,,ISO/TS 16775:2014,Packaging for terminally sterilized medical devices — Guidance on the application of ISO 11607-1 and ISO 11607-2,Emballages des dispositifs médicaux stérilisés au stade terminal — Lignes directrices relatives à l'application de l'ISO 11607-1 et l'ISO 11607-2,2014-05-09,1,['11.080.30'],ISO/TC 198,9599,,[76555],"['en','ru']",115,"<p>ISO/TS 16775:2014 provides guidance for the application of the requirements contained in ISO 11607‑1 and ISO 11607‑2. It does not add to, or otherwise change, the requirements of ISO 11607‑1 and/or ISO 11607‑2. It is an informative document, not normative, and does not include requirements to be used as basis of regulatory inspection or

65675,TS,,ISO/TS 16785:2014,Electronic Fee Collection (EFC) — Interface definition between DSRC-OBE and external in-vehicle devices,Perception du télépéage — Définition de l'interface entre l'équipement à bord à communications dédiées à courte portée (DSRC-OBE) et les dispostifs externes embarqués,2014-10-30,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[75832],['en'],30,<p>ISO/TS 16785:2014 defines an application interface between DSRC-based OBE and external in-vehicle devices to make DSRC-OBE applicable for diversified tolling environment.</p>

57776,TS,,ISO/TS 16791:2014,Health informatics — Requirements for international machine-readable coding of medicinal product package identifiers,"Informatique de santé — Exigences pour une identification internationale, lisible par capture automatique, des produits médicinaux",2014-03-19,1,['35.240.80'],ISO/TC 215,9599,,[75312],['en'],23,"<p>ISO/TS 16791:2014 provides guidance on identification and labelling of medicinal products from the point of manufacture of packaged medicinal product to the point of dispensing the product.</p><p>ISO/TS 16791:2014 outlines best practice for AIDC barcoding solutions for applications. Users can, however, consider the coding interoperability requirements f

75312,TS,,ISO/TS 16791:2020,Health informatics — Requirements for international machine-readable coding of medicinal product package identifiers,"Informatique de santé — Exigences pour une identification internationale, lisible par capture automatique, des produits médicinaux",2020-09-29,2,['35.240.80'],ISO/TC 215,9599,[57776],[89901],['en'],36,"<p>This document provides guidelines on identification and labelling of medicinal products from the point of manufacture of packaged medicinal product to the point of dispensing the product.</p><p>This document outlines best practice for AIDC barcoding solutions for applications. Users can, however, consider the coding interoperability requirements f

32416,TS,,ISO/TS 16799:1999,Rolling bearings — Dynamic load ratings and rating life — Discontinuities in the calculating of basic dynamic load ratings,Roulements — Charges dynamiques de base et durée nominale — Discontinuité dans le calcul des charges dynamiques de base,1999-12-16,1,['21.100.20'],ISO/TC 4/SC 8,9599,,[38102],"['en','fr']",5,

63041,TS,,ISO/TS 16840-11:2014,Wheelchair seating — Part 11: Determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrity,Sièges de fauteuils roulants — Partie 11: Détermination des caractéristiques de dissipation de la transpiration des coussins de siège destinés à préserver l'intégrité des tissus,2014-01-06,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[83111],"['en','fr']",5,<p>ISO/TS 16840-11:2014 specifies a method for determining the dissipation characteristics of simulated perspiration exposure on wheelchair seat cushions.</p><p>ISO/TS 16840-11:2014 is applicable to wheelchair seat cushions that include a cushion cover.</p>

65506,TS,,ISO/TS 16840-12:2015,Wheelchair seating — Part 12: Apparatus and method for cushion envelopment testing,Sièges de fauteuils roulants — Partie 12: Appareillage et méthode d'essai de l'enveloppement du coussin,2015-03-05,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[80851],"['en','fr']",14,"<p>ISO/TS 16840-12:2015 specifies apparatus, test methods, and disclosure requirements for characterization of wheelchair seat cushion immersion and envelopment properties using instrumented indenters to characterize the interface pressure of each indenter and the test cushion by measuring the cushioning effects of immersion and envelopment. This part of ISO 16840 can be considered to expand the characte

69406,TS,,ISO/TS 16843-1:2016,Health informatics — Categorial structures for representation of acupuncture — Part 1: Acupuncture points,Informatique de santé — Structures catégoriques pour la représentation de l'acupuncture — Partie 1: Points d'acupuncture,2016-11-17,1,['35.240.80'],ISO/TC 215,9599,,[88568],['en'],33,"<p>ISO/TS 16843-1:2016 specifies the <b>categorial structure</b> within the <b>subject field</b> of acupuncture by defining a set of <b>domain constraints</b> of <b>sanctioned characteristics</b> each composed of a <b>semantic link</b> and an applicable <b>characterizing category</b> in order to represent the <b>concept</b> of acupuncture point.</p><p>ISO/TS 16843-1:2016 descri

69409,TS,,ISO/TS 16843-2:2015,Health informatics — Categorial structures for representation of acupuncture — Part 2: Needling,Informatique de santé — Structures catégoriques pour la représentation de l'acupuncture — Partie 2: Puncture,2015-12-08,1,['35.240.80'],ISO/TC 215,9599,,"[78688,88569]",['en'],9,"<p>The purpose of ISO/TS 16843-2:2015 is to specify categorial structures within the subject field of acupuncture by defining a set of domain constraints for use within terminological resources.</p><p>This Technical Specification describes a concept system detailing domain constraints of sanctioned characteristics, each composed of a semantic link and an applicable characterizing category.</p

43733,TS,,ISO/TS 16878:2010,Direct reduced iron and hot briquetted iron — Determination of metallic iron — Iron(III) chloride titrimetric method,Minerais de fer préréduits et fer briqueté à chaud — Dosage du fer métallique — Méthode titrimétrique au chlorure de fer(III),2010-11-22,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[68783],['en'],13,<p>ISO/TS 16878:2010 specifies an iron(III)<b> </b>chloride titrimetric method for the determination of the mass fraction of metallic iron in hot briquetted iron (HBI) and direct reduced iron (DRI).</p><p>This method cannot be used for referee purposes.</p>

57889,TS,,ISO/TS 16901:2015,Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface,Guide pour l’évaluation des risques dans la conception d’installations terrestres pour le GNL en incluant l’interface terre/navire,2015-03-02,1,['75.180.01'],ISO/TC 67/SC 9,9599,,[83773],['en'],57,"<p>ISO/TS 16901:2015 provides a common approach and guidance to those undertaking assessment of the major safety hazards as part of the planning, design, and operation of LNG facilities onshore and at shoreline using risk-based methods and standards, to enable a safe design and operation of LNG facilities. The environmental risks associated with an LNG re

31135,TS,,ISO/TS 16922:2002,Natural gas — Guidelines for odorizing gases,Gaz naturel — Lignes directrices pour odoriser les gaz,2002-07-04,1,['75.060'],ISO/TC 193,9599,,"[57082,42852]",['en'],12,"<p>ISO/TS 16922 gives the guidelines for the methods and odorants to be used in the odorization of natural gas.</p><p>ISO/TS 16922 also specifies the general requirements for odorants, the physical and chemical properties of commonly used sulfur-containing odorants, the principles for the determination of odour intensity, the odorization technique (including handling and storage of odorants) and the control of odorization of natural gas.</p>"

73275,TS,,ISO/TS 16943:2019,Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing,Tubes en matières thermoplastiques pour le transport des fluides — Contrôle des assemblages par emboîtures électrosoudables en polyéthylène au moyen de la technique par ultrasons multi-éléments,2019-12-04,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[83935],['en'],22,"<p>This document describes the phased array ultrasonic testing (PAUT) of polyethylene electrofusion (EF) socket joints used for the conveyance of fluids. This document provides a test whereby the presence of imperfections such as voids, wire dislocation, misalignmen

30512,TS,,ISO/TS 16949:1999,Quality systems — Automotive suppliers — Particular requirements for the application of ISO 9001:1994,Systèmes qualité — Fournisseurs pour l'automobile — Exigences particulières pour l'application de l'ISO 9001:1994,1999-04-15,1,"['03.100.70','43.020']",ISO/TC 176,9599,,[36155],['en'],42,

36155,TS,,ISO/TS 16949:2002,Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations,Systèmes de management de la qualité — Exigences particulières pour l'application de l'ISO 9001:2000 pour la production de série et de pièces de rechange dans l'industrie automobile,2002-03-14,2,"['03.100.70','43.020']",ISO/TC 176,9599,[30512],[52844],"['en','es','fr']",34,"<p>This Technical Specification, in conjunction with ISO 9001:2000, defines the quality management system requirements for the design and development, production and, when relevant, installation and service of automotive-related products.</p

29024,TS,,ISO/TS 16951:2004,Road vehicles — Ergonomic aspects of transport information and control systems (TICS) — Procedures for determining priority of on-board messages presented to drivers,Véhicules routiers — Aspects ergonomiques des systèmes de commande et d'information du transport (TICS) — Modes opératoires pour la détermination de la priorité des messages embarqués présentés aux conducteurs,2004-03-15,1,"['13.180','35.240.60','43.040.15']",ISO/TC 22/SC 39,9599,,[81103],['en'],28,"<p>ISO/TS 16951:2004 provides formal procedures and two alternative methods for determining the priority of on-board messages presented to drivers of road vehicles by transport information and control syst

38178,TS,,ISO/TS 16952-1:2006,Technical product documentation — Reference designation system — Part 1: General application rules,Documentation technique de produits — Système de désignation de référence — Partie 1: Règles générales d'application,2006-06-14,1,['01.110'],ISO/TC 10/SC 10,9599,,[59598],['en'],47,"<p>ISO/TS 16952-1:2006 establishes comprehensive and practice-oriented principles and rules for the designation of technical objects within a system, as well as for the designation of connections, signals and documents in accordance with the corresponding basic standards.</p><p>The principles of ISO/TS 16952-1:2006 apply to all technical fields for all industries and can be applied in a

58056,TS,,ISO/TS 16965:2013,Soil quality — Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS),Qualité du sol — Détermination des éléments en traces par spectrométrie de masse avec plasma induit par haute fréquence (ICP-MS),2013-08-28,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[83394],['en'],13,"<p>ISO/TS 16965:2013 specifies a method for the determination of the following elements in <i>aqua regia</i> or nitric acid digests or other extraction solutions of sludge, treated biowaste and soil:</p><p>Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), cesium (Cs), chromium

42761,TS,,ISO/TS 16976-1:2007,Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates,Appareils de protection respiratoire — Facteurs humains — Partie 1: Régimes métaboliques et régimes des débits respiratoires,2007-10-22,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[67530],"['en','fr']",16,"<p>ISO/TS 16976-1:2007 is part of a series that provides information on factors related to human anthropometry, physiology, ergonomics and performance, for the preparation of standards for performance requirements, testing and use of respiratory protective devices. ISO/TS 16976-1:2007 contains information related to respiratory and metabolic responses to rest and work

67530,TS,,ISO/TS 16976-1:2015,Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates,Appareils de protection respiratoire — Facteurs humains — Partie 1: Métabolismes énergétiques et régimes des débits respiratoires,2015-11-25,2,['13.340.30'],ISO/TC 94/SC 15,9599,[42761],[81704],"['en','fr']",19,"<p>ISO/TS 16976-1:2015 provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for performance requirements, testing, and use of respiratory protective devices. This part of ISO/TS 16976 contains information related to respiratory and metabolic responses to rest and work at va

42762,TS,,ISO/TS 16976-2:2010,Respiratory protective devices — Human factors — Part 2: Anthropometrics,Appareils de protection respiratoire — Facteurs humains — Partie 2: Anthropométrie,2010-06-07,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[67529],['en'],24,"<p>ISO/TS 16976‑2:2010 is one part of a series of technical specifications that provide information on factors related to human anthropometry, physiology, ergonomics and performance for the preparation of standards for design, testing and use of respiratory protective devices. ISO/TS 16976‑2:2010 contains information related to anthropometry. In particular, information is given for:</p><ul><li> anthropometric measurement methods;</li><l

60692,TS,Cor,ISO/TS 16976-2:2010/Cor 1:2011,Respiratory protective devices — Human factors — Part 2: Anthropometrics — Technical Corrigendum 1,Appareils de protection respiratoire — Facteurs humains — Partie 2: Anthropométrie — Rectificatif technique 1,2011-12-14,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[67529],['en'],2,

67529,TS,,ISO/TS 16976-2:2015,Respiratory protective devices — Human factors — Part 2: Anthropometrics,Appareils de protection respiratoire — Facteurs humains — Partie 2: Anthropométrie,2015-04-13,2,['13.340.30'],ISO/TC 94/SC 15,9599,"[60692,42762]",[81705],"['en','fr']",24,"<p>ISO/TS 16976-2:2015 is one part of a series of Technical Specifications that provide information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for design, testing, and use of respiratory protective devices. It contains information related to anthropometry. In particular, information is given for:</p><p>? anthropometric measurement methods;</p><p>?

46005,TS,,ISO/TS 16976-3:2011,Respiratory protective devices — Human factors — Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment,Appareils de protection respiratoire — Facteurs humains — Partie 3: Réponses physiologiques et limitations en oxygène et en gaz carbonique dans l'environnement respiratoire,2011-08-10,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[73209],['en'],23,"<p>ISO/TS 16976-3:2011 gives:</p><ul><li> a description of the factors contributing to the present content of the Earth's atmosphere; </li><li> a description of the physiology of human respiration; </li><li> a survey of the current biomedic

73209,TS,,ISO/TS 16976-3:2019,Respiratory protective devices — Human factors — Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment,Appareils de protection respiratoire — Facteurs humains — Partie 3: Réponses physiologiques et limitations en oxygène et en dioxyde de carbone dans l’environnement respiratoire,2019-03-15,2,['13.340.30'],ISO/TC 94/SC 15,9599,[46005],[81706],"['en','fr']",24,"<p>This document gives:</p><p>— a description of the composition of the Earth's atmosphere;</p><p>— a description of the physiology of human respiration;</p><p>— a survey of the current biomedical literature on the

53361,TS,,ISO/TS 16976-4:2012,Respiratory protective devices — Human factors — Part 4: Work of breathing and breathing resistance: Physiologically based limits,Appareils de protection respiratoire — Facteurs humains — Partie 4: Travail de respiration et de résistance à la respiration: limites physiologiques,2012-06-08,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[73210],"['en','fr']",16,"<p>ISO/TS 16976-4:2012 describes how to calculate the work performed by a person's respiratory muscles with and without the external respiratory impediments that are imposed by RPD of all kinds, except diving equipment. ISO/TS 16976-4:2012 describes how much additional impediment people can tolerate and contains va

73210,TS,,ISO/TS 16976-4:2019,Respiratory protective devices — Human factors — Part 4: Work of breathing and breathing resistance: Physiologically based limits,Appareils de protection respiratoire — Facteurs humains — Partie 4: Travail de respiration et résistance respiratoire: limites physiologiques,2019-03-29,2,['13.340.30'],ISO/TC 94/SC 15,9599,[53361],[81707],"['en','fr']",16,"<p>This document describes how to calculate the work performed by a person's respiratory muscles with and without the external respiratory impediments that are imposed by RPD of all kinds, except diving equipment. This Document describes how much additional impediment people can tolerate and contains values that ca

57985,TS,,ISO/TS 16976-5:2013,Respiratory protective devices — Human factors — Part 5: Thermal effects,Dispositifs de protection respiratoire — Facteurs humains — Partie 5: Effets thermiques,2013-10-18,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[75719],"['en','fr']",15,"<p>ISO/TS 16976-5:2013 is one of a series of Technical Specifications that provide information on factors related to human anthropometry, physiology, ergonomics and performance for the preparation of standards for design, testing and use of respiratory protective devices. It contains information related to thermal effects of respiratory protective devices on the human body, in particular: temperatures of surfaces associated with d

75719,TS,,ISO/TS 16976-5:2020,Respiratory protective devices — Human factors — Part 5: Thermal effects,Dispositifs de protection respiratoire — Facteurs humains — Partie 5: Effets thermiques,2020-03-25,2,['13.340.30'],ISO/TC 94/SC 15,9599,[57985],[82899],"['en','fr']",15,"<p>This document is one part of a series of Technical Specifications that provide information on factors related to human anthropometry, physiology, ergonomics and performance for the preparation of standards for design, testing and use of respiratory protective devices. This document contains information related to thermal effects of respiratory protective devices on the human body. In particular information is given for:<

61233,TS,,ISO/TS 16976-6:2014,Respiratory protective devices — Human factors — Part 6: Psycho-physiological effects,Appareils de protection respiratoire — Facteurs humains — Partie 6: Effets psycho-physiologiques,2014-05-15,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[81708],"['en','fr']",14,"<p>ISO/TS 16976-6:2014 provides information on the psycho-physiological effects related to the wearing of respiratory protective devices (RPD) and it is intended for the preparation of standards for selection and use of RPD.</p><p>It specifies for the writers of RPD standards, principles relating to</p><ul><li>the interaction between RPD and the human physiological and psychological perception,</li><li>the ac

61234,TS,,ISO/TS 16976-7:2013,Respiratory protective devices — Human factors — Part 7: Hearing and speech,Appareils de protection respiratoire — Facteurs humains — Partie 7: Discours et audition,2013-04-09,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[73621],"['en','fr']",12,<p>ISO/TS 16976-7:2013 contains information related to the interaction between respiratory protective devices and the human body functions of hearing and speech.</p>

73621,TS,,ISO/TS 16976-7:2020,Respiratory protective devices — Human factors — Part 7: Hearing and speech,Appareils de protection respiratoire — Facteurs humains — Partie 7: Discours et audition,2020-01-06,2,['13.340.30'],ISO/TC 94/SC 15,9599,[61234],[82900],"['en','fr']",16,<p>This document contains information related to the interaction between respiratory protective devices and the human body functions of hearing and speech.</p>

61235,TS,,ISO/TS 16976-8:2013,Respiratory protective devices — Human factors — Part 8: Ergonomic factors,Appareils de protection respiratoire — Facteurs humains — Partie 8: Facteurs ergonomiques,2013-05-27,1,['13.340.30'],ISO/TC 94/SC 15,9599,,[81709],"['en','fr']",19,"<p>ISO/TS 16976-8:2013 gives guidance on the generic ergonomic factors for the preparation of standards for performance requirements, testing and use of respiratory protective devices (RPD).</p><p>It specifies principles relating to:</p><p>the biomechanical interaction between RPD and the human body;</p><p>the interaction between RPD and the human senses: vision, hearing, smell, taste and skin contact.</p>"

35489,TS,,ISO/TS 17090-1:2002,Health informatics — Public key infrastructure — Part 1: Framework and overview,Informatique de santé — Infrastructure de clé publique — Partie 1: Cadre et vue d'ensemble,2002-10-03,1,['35.240.80'],ISO/TC 215,9599,,[39845],['en'],33,"<p>ISO/TS 17090-1 defines the basic concepts of a healthcare public key infrastructure (PKI) and provides a scheme of interoperability requirements to establish a PKI enabled secure communication of health information. It also identifies the major stakeholders who are communicating in health, as well as the main security services required for health communication where PKI may be required. </p><p>ISO/TS 17090-1 gives a brief introdu

35490,TS,,ISO/TS 17090-2:2002,Health informatics — Public key infrastructure — Part 2: Certificate profile,Informatique de santé — Infrastructure de clé publique — Partie 2: Profil de certificat,2002-10-03,1,['35.240.80'],ISO/TC 215,9599,,[39846],['en'],26,"<p>ISO/TS 17090-2 specifies the certificate profiles required to interchange healthcare information within a single organization, between different organizations and across jurisdictional boundaries. It details the use made of public key infrastructure (PKI) digital certificates in the health industry and focuses, in particular, on specific healthcare issues relating to certificate profiles.</p>"

35491,TS,,ISO/TS 17090-3:2002,Health informatics — Public key infrastructure — Part 3: Policy management of certification authority,Informatique de santé — Infrastructure de clé publique — Partie 3: Gestion politique d'autorité de certification,2002-10-03,1,['35.240.80'],ISO/TC 215,9599,,[39847],['en'],29,"<p>ISO/TS 17090-3 gives guidelines for certificate management issues involved in implementing and operating a healthcare public key infrastructure (PKI). It specifies a structure and minimum requirements for certificate policies, as well as a structure for associated certification practice statements. </p><p>ISO/TS 17090-3 also identifies the principles needed in a healthcare security poli

42119,TS,,ISO/TS 17104:2006,Rotary tool for threaded fasteners— Hydraulic impulse tools — Performance test method,Outils rotatifs pour éléments de fixation filetés — Outils hydraulique à impulsion — Méthode d'essai des caractéristiques de fonctionnement,2006-04-19,1,"['23.140','25.140.10']",ISO/TC 118/SC 3,9599,,[82325],['en'],27,"<p>ISO/TS 17104:2006 specifies a laboratory performance test method for hydraulic impulse tools for installing threaded fasteners. It gives instructions on the procedure, performance parameters to test, how to evaluate and present the test data and justification for the test method.</p><p>ISO/TS 17104:2006 is not intended as a routine in-plant inspection method.</p

32883,TS,,ISO/TS 17117:2002,Health informatics — Controlled health terminology — Structure and high-level indicators,Informatique de santé — Terminologie contrôlée relative à la santé — Structure et indicateurs de haut niveau,2002-03-07,1,"['01.040.35','35.240.80']",ISO/TC 215,9599,,[42223],['en'],24,

59194,TS,,ISO/TS 17137:2014,Cardiovascular implants and extracorporeal systems — Cardiovascular absorbable implants,Implants cardiovasculaires et systèmes extracorporels — Implants cardiovasculaires absorbables,2014-05-12,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[74669],['en'],26,"<p>ISO/TS 17137:2014 outlines design verification and validation considerations for absorbable cardiovascular implants.</p><p>ISO/TS 17137:2014 is applicable to implants in direct contact with the cardiovascular system, where the intended action is upon the circulatory system. ISO/TS 17137:2014 does not address the specific evaluation of issues associated with viable tissues, viable cells, and/or implants with non-via

74669,TS,,ISO/TS 17137:2019,Cardiovascular implants and extracorporeal systems — Cardiovascular absorbable implants,Implants cardiovasculaires et systèmes extracorporels — Implants cardiovasculaires absorbables,2019-09-04,2,['11.040.40'],ISO/TC 150/SC 2,9599,[59194],[80231],['en'],29,"<p>This document outlines design evaluation guidelines for absorbable cardiovascular implants used to treat vessels and/or the vascular space within the circulatory system, including the heart and all vasculature. This document is meant to supplement device-specific standards by providing guidelines specific for absorbable implants and/or components</p><p>This document is applicable to implants in direct contac

55651,TS,,ISO/TS 17165-2:2013,Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose assemblies,Transmissions hydrauliques — Flexibles de raccordement — Partie 2: Pratiques pour les flexibles de raccordement hydrauliques,2013-04-04,1,['23.040.70'],ISO/TC 131/SC 4,9599,[35535],[74155],"['en','fr']",18,"<p>ISO/TS 17165-2:2013 provides guidelines for selection, routing, fabrication, installation, replacement, maintenance and storage of hose and hose assemblies for hydraulic fluid power systems which are manufactured from hoses conforming to ISO 1436, ISO 3862, ISO 3949, ISO 4079 and ISO 11237, and hose fittings conforming to ISO 12151-1 to ISO 12151-6.</p><p>Many of thes

59292,TS,,ISO/TS 17187:2013,Intelligent transport systems — Electronic information exchange to facilitate the movement of freight and its intermodal transfer — Governance rules to sustain electronic information exchange methods,Systèmes intelligents de transport — Échange d'informations électroniques pour faciliter le mouvement du fret et son transfert intermodal — Règles de gouvernance pour soutenir les méthodes d'échange d'informations électroniques,2013-11-26,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[75322],['en'],29,"<p>ISO/TS 17187:2013 provides governance rules to be used for executing an organized process for business entities to connect to one another electronically for the con

59369,TS,,ISO/TS 17200:2013,Nanotechnology — Nanoparticles in powder form — Characteristics and measurements,Nanotechnologies — Nanoparticules sous forme de poudre — Caractéristiques et mesures,2013-05-15,1,['07.120'],ISO/TC 229,9599,,[73132],"['en','fr','ru']",7,<p>ISO/TS 17200:2013 lists fundamental characteristics which are commonly determined for nanoparticles in powder form. ISO/TS 17200:2013 prescribes specific measurement methods for each of these characteristics.</p>

71915,TS,,ISO/TS 17225-8:2016,Solid biofuels — Fuel specifications and classes — Part 8: Graded thermally treated and densified biomass fuels,Biocombustibles solides — Classes et spécifications des combustibles — Partie 8: Combustibles de biomasses traitées thermiquement et densifiées,2016-12-14,1,"['27.190','75.160.10']",ISO/TC 238,9599,,[83584],"['en','fr']",14,"<p>ISO/TS 17225-8:2016 determines the fuel quality classes and specifications of graded densified solid biofuels produced from thermally treated biomass for non-industrial and industrial use. This document covers pellets and briquettes produced from the following raw materials (see ISO 17225‑1:2014, Table 1):</p><p>- 1.1 Fores

75158,TS,,ISO/TS 17225-9:2020,Solid biofuels — Fuel specifications and classes — Part 9: Graded hog fuel and wood chips for industrial use,Biocombustibles solides — Classes et spécifications des combustibles — Partie 9: Plaquettes et broyat de bois à usage industriel,2020-03-27,1,"['27.190','75.160.40']",ISO/TC 238,9599,,[81184],"['en','fr']",8,"<p>This document determines the fuel quality classes and specifications of graded hog fuel and wood chips for industrial use. It covers only hog fuel and wood chips produced from the following raw materials (see ISO 17225-1:—, Table 1):</p><p>— 1.1 forest, plantation and other virgin wood;</p><p>— 1.2 by-products and residues from wood proces

31292,TS,,ISO/TS 17226:2003,Leather — Chemical tests — Determination of formaldehyde content,Cuir — Essais chimiques — Dosage du formaldéhyde,2003-08-21,1,['59.140.30'],IULTCS,9599,,"[43476,43871]","['en','fr']",9,"<p>ISO/TS 17226:2003 specifies two methods for the determination of free and released formaldehyde in leathers. One method is relatively simple with regard to the laboratory equipment (colorimetric method), while the other needs more sophisticated equipment (HPLC method). The HPLC method is selective and not sensitive to coloured extracts.</p>"

31300,TS,,ISO/TS 17234:2003,Leather — Chemical tests — Determination of certain azo colourants in dyed leathers,Cuir — Essais chimiques — Dosage de certains colorants azoïques dans les cuirs teints,2003-08-21,1,['59.140.30'],IULTCS,9599,,[50111],"['en','fr']",7,<p>ISO/TS 17234:2003 specifies a method for detecting the use of certain azo colourants which may release aromatic amines.</p>

64152,TS,,ISO/TS 17251:2016,Health informatics — Business requirements for a syntax to exchange structured dose information for medicinal products,Informatique de santé — Exigences d'affaire pour une syntaxe d'échange d'informations de dose structurée pour les produits médicaux,2016-06-16,1,['35.240.80'],ISO/TC 215,9599,,[79932],['en'],9,"<p>ISO/TS 17251:2016 specifies the business requirements for the structured content of structured or semi-structured dose instructions for recording dose instructions in the electronic health record (EHR), supporting clinical decision support, and in exchanging medication orders, as applicable to primary, secondary and tertiary care.</p><p>NOTE See

40206,TS,,ISO/TS 17261:2005,Intelligent transport systems - Automatic vehicle and equipment identification — Intermodal goods transport architecture and terminology,Systèmes intelligents de transport - Identification automatique des véhicules et des équipements - Architecture et terminologie du transport intermodal des marchandises,2005-05-18,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[55494],['en'],30,"<p>ISO TS 17261:2005 describes the conceptual and logical architecture for automatic vehicle and Equipment identification (AVI/AEI) and supporting services in an intermodal/multimodal environment. It presents a high level view of AEI intermodal and multimodal system Architecture. ISO TS 1

43167,TS,Cor,ISO/TS 17261:2005/Cor 1:2005,Intelligent transport systems - Automatic vehicle and equipment identification — Intermodal goods transport architecture and terminology — Technical Corrigendum 1,Systèmes intelligents de transport - Identification automatique des véhicules et des équipements - Architecture et terminologie du transport intermodal des marchandises — Rectificatif technique 1,2005-09-15,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[55494],['en'],1,

29252,TS,,ISO/TS 17262:2003,Automatic vehicle and equipment identification — Intermodal goods transport — Numbering and data structures,Identification automatique des véhicules et des équipements — Transport intermodal de marchandises — Structures des données et numérotation,2003-06-17,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[55495],['en'],20,"<p>ISO/TS 17262:2003 defines generic numbering and data structures for unambiguous identification of equipment used for Intermodal goods transport. These data are known as Intermodal Goods Transport Numbering and Data Structures.</p><p>ISO/TS 17262:2003 defines data independently of the data carrier. The modelling of data is based on Abstract Sy

29253,TS,,ISO/TS 17263:2003,Automatic vehicle and equipment identification — Intermodal goods transport — System parameters,Identification automatique des véhicules et des équipements — Transport intermodal de marchandises — Paramètres des systèmes,2003-06-16,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[55496],['en'],11,"<p>ISO/TS 17263:2003 establishes an AEI-System based on radio frequency technologies. This system is intended for general application in RTTT/TICS. It allows for the transfer of the identification codes and further information about equipment and vehicles used in intermodal transport into such RTTT/TICS and information systems related to Intermodal Transport processes. Wi

64252,TS,,ISO/TS 17321-4:2016,Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 4: Programmable light emission system,Technologie graphique et photographie — Caractérisation de la couleur des appareils photonumériques — Partie 4: Système d'émission de lumière programmable,2016-06-02,1,['37.040.10'],ISO/TC 42,9599,,[81549],['en'],28,"<p>ISO/TS 17321-4:2016 specifies requirements for a programmable light emission system to produce various spectral radiance distributions intended for DSC colour characterization applications.</p><p>NOTE 1 Evaluation metrics are described in this part of ISO 17321. These evaluations metrics are intended to p

40555,TS,,ISO/TS 17369:2005,Statistical data and metadata exchange (SDMX),Données statistiques et échange de métadonnées (SDMX),2005-12-05,1,['35.240.01'],ISO/TC 154,9599,,[52500],['en'],328,<p>ISO/TS 17369:2005 deals with statistical data and metadata exchange in six sections covering the following topics:</p><p> framework for SDMX standards;</p><p> SDMX information model;</p><p> SDMX-ML schema and documentation;</p><p> SDMX-EDI syntax and documentation;</p><p> an implementer's guide for SDMX;</p><p> SDMX guidelines for the use of web services.</p>

59720,TS,,ISO/TS 17419:2014,Intelligent transport systems — Cooperative systems — Classification and management of ITS applications in a global context,Systèmes intelligents de transport — Classification et gestion des applications de systèmes intelligents de transport dans un contexte global,2014-04-02,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[70077],['en'],40,"<p>ISO/TS 17419:2014 illustrates and specifies 'Global Classification and Management of ITS Applications' (GCMA). It is based on the ITS station and communication architecture described in ISO 21217. It describes and specifies globally unique addresses and identifiers (ITS-S object identifiers) which are both internal and exter

59721,TS,,ISO/TS 17423:2014,Intelligent transport systems — Cooperative systems — ITS application requirements and objectives for selection of communication profiles,Systèmes intelligents de transport — Systèmes coopératifs — Exigences d'application d'ITS pour sélection d'interfaces de communication,2014-04-02,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[68267],['en'],32,"<p>ISO/TS 17423:2014 specifies communication service parameters presented by ITS-S station (ITS_S) application processes to the ITS-S management in support of automatic selection of ITS-S communication profiles in an ITS station unit (ITS-SU) and related related procedures for the static and dynamic ITS-S communication p

59725,TS,,ISO/TS 17427:2014,Intelligent transport systems — Cooperative systems — Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems,Systèmes intelligents de transport — Systèmes coopératifs — Rôles et responsabilités dans le contexte des ITS fondés sur l'architecture de systèmes coopératifs,2014-07-04,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[66924],['en'],45,"<p>ISO/TS 17427:2014 describes the (actor invariant) roles and responsibilities required to deploy and operate Cooperative-ITS (C-ITS). The organizational architecture described in this document is to be used for a fully operational system. ISO/TS 17427:2014 is couched i

59744,TS,,ISO/TS 17439:2014,Health informatics — Development of terms and definitions for health informatics glossaries,Informatique de santé — Développement des termes et définitions pour les glossaires d'informatique de santé,2014-11-14,1,['35.240.80'],ISO/TC 215,9599,,[75963],['en'],17,"<p>ISO/TS 17439:2014 provides details of the metadata and requirements for quality terms and <b>definitions in health informatics for inclusion in health informatics glossaries.</b></p><p>ISO/TS 17439:2014 does not cover specification of terminological content in systems, such as that represented in terminological resources, such as SNOMED, CT, or, ICD. It is limited to terms and definitions included in s

59776,TS,,ISO/TS 17444-1:2012,Electronic fee collection — Charging performance — Part 1: Metrics,Perception du télépéage — Performance d'imputation — Partie 1: Métrique,2012-10-01,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[72358],['en'],28,"<p>ISO/TS 17444-1:2012 defines metrics for the charging performance of electronic fee collection (EFC) systems in terms of the level of errors associated with charging computation.</p><p>ISO/TS 17444-1:2012 is a toolbox standard of metrics. The detailed choice of metrics depends on the application and the respective context. </p><p>ISO/TS 17444-1:2012 describes a set of metrics with appropriate definitions, principles and formulations, which together

72358,TS,,ISO/TS 17444-1:2017,Electronic fee collection — Charging performance — Part 1: Metrics,Perception du télépéage — Performance d'imputation — Partie 1: Métrique,2017-09-08,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,[59776],[82970],['en'],25,"<p>ISO/TS 17444-1:2017 defines metrics for the charging performance of electronic fee collection (EFC) systems in terms of the level of errors associated with charging computation.</p><p>ISO/TS 17444-1:2017 is a toolbox standard of metrics. The detailed choice of metrics depends on the application and the respective context.</p><p>ISO/TS 17444-1:2017 describes a set of metrics with appropriate definitions, principles and formulations, which to

61818,TS,,ISO/TS 17444-2:2013,Electronic fee collection — Charging performance — Part 2: Examination Framework,Perception du télépéage — Performance d'imputation — Partie 2: Cadre d'examen,2013-10-31,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[72359],"['en','fr']",93,"<p>ISO/TS 17444-2:2013 defines the Examination Framework for the measurement of Charging Performance Metrics defined in ISO/TS 17444-1 to be used during Evaluation and/or on-going Monitoring. </p><p>It specifies a method for the specification and documentation of a Specific Examination Framework which can be used by the responsible entity to evaluate charging performance for a particular information exchange interface or fo

72359,TS,,ISO/TS 17444-2:2017,Electronic fee collection — Charging performance — Part 2: Examination framework,Perception du télépéage — Performance d'imputation — Partie 2: Cadre d'examen,2017-09-21,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,[61818],[82970],['en'],93,"<p>ISO/TS 17444-2:2017 defines the Examination Framework for the measurement of charging performance metrics defined in ISO/TS 17444‑1 to be used during Evaluation and/or on-going Monitoring.</p><p>It specifies a method for the specification and documentation of a Specific Examination Framework which can be used by the responsible entity to evaluate charging performance for a particular information exchange interface or for

30671,TS,,ISO/TS 17450-1:2005,Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification,Spécification géométrique des produits (GPS) — Concepts généraux — Partie 1: Modèle pour la spécification et la vérification géométriques,2005-02-02,1,['17.040.40'],ISO/TC 213,9599,,[53628],"['en','fr']",49,<p>ISO/TS 17450-1:2005 provides a model for geometrical specification and verification and defines the corresponding concepts. It also explains the mathematical basis of the concepts associated with the model.</p>

46122,TS,Cor,ISO/TS 17450-1:2005/Cor 1:2007,Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — Concepts généraux — Partie 1: Modèle pour la spécification et la vérification géométriques — Rectificatif technique 1,2007-06-05,1,['17.040.40'],ISO/TC 213,9599,,[53628],"['en','fr']",1,

33756,TS,,ISO/TS 17450-2:2002,"Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators and uncertainties","Spécification géométrique des produits (GPS) — Concepts généraux — Partie 2: Principes de base, spécifications, opérateurs et incertitudes",2002-11-01,1,['17.040.01'],ISO/TC 213,9599,,[53629],"['en','fr']",17,"<p>ISO/TS 17450-2 defines terms related to specifications, operators (and operations) and uncertainties used in geometrical product specifications (GPS) standards, presents the basic tenets of the GPS philosophy while discussing the impact of uncertainty on those tenets, and examines the processes of specification and verificat

40760,TS,Cor,ISO/TS 17450-2:2002/Cor 1:2004,"Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators and uncertainties — Technical Corrigendum 1","Spécification géométrique des produits (GPS) — Concepts généraux — Partie 2: Principes de base, spécifications, opérateurs et incertitudes — Rectificatif technique 1",2004-07-12,1,['17.040.01'],ISO/TC 213,9599,,[53629],['fr'],,

35925,TS,,ISO/TS 17477:2003,Acceptance tests for CO2-laser beam machines for welding and cutting using 2D moving optics type,Essais de réception des machines de soudage et de coupage par faisceau laser CO2 à l'aide d'optiques mobiles 2D,2003-11-07,1,['25.160.30'],ISO/TC 44/SC 10,9599,,"[42195,45112]","['en','fr']",8,"<p>ISO/TS 17477:2003 provides a guideline on minimum requirements for acceptance tests by using practical test methods for the two-dimensional CO₂-laser beam machines for welding and cutting, fixing a workpiece on the platen, by using moving optics. It is not applicable to the machines that use an articulated robot.</p><p>ISO/TS 17477:2003 does not cover hazard protec

59981,TS,,ISO/TS 17536-2:2017,Road vehicles — Aerosol separator performance test for internal combustion engines — Part 2: Laboratory test method,Véhicules routiers — Essai de performance du séparateur d'aérosols pour les moteurs à combustion interne — Partie 2: Méthode d'essai de laboratoire,2017-10-10,1,['43.060.20'],ISO/TC 22/SC 34,9599,,"[82801,88251]",['en'],24,"<p>ISO/TS 17536-2 defines standardized and repeatable test procedures for the evaluation of blowby oil aerosol separators and filtering devices and specifies laboratory gravimetric separation efficiency and system pressure tests in both open and closed crankcase ventilation systems. ISO/TS 17536-2 has a limitation of 0 % to 99 %

79158,TS,,ISO/TS 17573-2:2020,Electronic fee collection — System architecture for vehicle related tolling — Part 2: Vocabulary,Perception de télépéage – Architecture de systèmes pour le péage lié aux véhicules — Partie 2: Vocabulaire,2020-07-02,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[89981],"['en','fr']",24,"<p>This document defines terms within the field of electronic fee collection (EFC).</p><p>This document defines:</p><p>— terms within the fields of electronic fee collection and road user charging;</p><p>— terms that are used in standards related to electronic fee collection;</p><p>— terms of a more general use that are used more specifically in standards related to e

30757,TS,,ISO/TS 17573:2003,Road Transport and Traffic Telematics — Electronic Fee Collection (EFC) — Systems architecture for vehicle related transport services,Télématique de la circulationet du transport routier — Perception du télépéage — Architecture système pour systèmes de transport embarqués sur le véhicule,2003-06-16,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[45963],['en'],30,"<p>ISO/TS 17573:2003 specifies a system architecture for electronic fee collection (EFC) systems concerning vehicle related transport services such as the use of toll roads, zone access, parking and route guidance.</p><p>ISO/TS 17573:2003 does not cover person related transport services such as public tra

81764,TS,,ISO/TS 17573-3:2021,Electronic fee collection — System architecture for vehicle-related tolling — Part 3: Data dictionary,Perception du télépéage — Architecture de systèmes pour le péage lié aux véhicules — Partie 3: Dictionnaire de données,2021-08-31,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[85042],['en'],44,"<p>This document specifies the syntax and semantics of data objects in the field of electronic fee collection (EFC). The definitions of data types and assignment of values are provided in accordance with the abstract syntax notation one (ASN.1) technique, as specified in ISO/IEC 8824‑1. This document defines:</p><p>— ASN.1 (data) types within the fields of EFC;</p><p

30759,TS,,ISO/TS 17574:2004,Road transport and traffic telematics — Electronic fee collection (EFC) — Guidelines for EFC security protection profiles,Transports routiers et télématique routière — Systèmes de péage électronique — Lignes directrices concernant les profils de protection de la sécurité des péages,2004-10-27,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[52387],['en'],67,"<p>ISO/TS 17574:2004 gives guidelines for the preparation and evaluation of security requirements specifications, referred to as Protection Profiles (PP) in ISO/IEC 15408 and ISO/IEC TR 15446, for the production of PPs and security targets. A PP is a set of security requirements which meet specific needs for a

52387,TS,,ISO/TS 17574:2009,Electronic fee collection - Guidelines for security protection profiles,Perception de télépéage - Lignes directrices concernant les profils de protection de la sécurité,2009-09-03,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,[30759],[70051],['en'],60,"<p>ISO/TS 17574:2009 provides a guideline for preparation and evaluation of security requirements specifications, referred to as Protection Profiles (PP) in the ISO/IEC 15408 series and in ISO/IEC TR 15446. By a Protection Profile (PP) is meant a set of security requirements for a category of products or systems that meet specific needs. A typical example would be a PP for On-Board Equipment (OBEs) to be used in an

51859,TS,,ISO/TS 17575-1:2010,Electronic fee collection — Application interface definition for autonomous systems — Part 1: Charging,Perception du télépéage — Définition de l'interface d'application pour les systèmes autonomes — Partie 1: Imputation,2010-06-10,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[64161],['en'],23,"<p>ISO/TS 17575‑1:2010 defines the format and semantic of the data exchange between a Front End (OBE plus optional proxy) and corresponding Back Ends in autonomous toll regimes. ISO/TS 17575‑1:2010 deals with the definition of the data elements used to report charging details from the Front End to the CE and to receive data which can be used to re-configure the ongoing p

63685,TS,Cor,ISO/TS 17575-1:2010/Cor 1:2013,Electronic fee collection — Application interface definition for autonomous systems — Part 1: Charging — Technical Corrigendum 1,Perception du télépéage — Définition de l'interface d'application pour les systèmes autonomes — Partie 1: Imputation — Rectificatif technique 1,2013-03-20,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[64161],['en'],3,

51860,TS,,ISO/TS 17575-2:2010,Electronic fee collection — Application interface definition for autonomous systems — Part 2: Communication and connection to the lower layers,Perception du télépéage — Définition de l'interface d'application pour les systèmes autonomes — Partie 2: Communications et connexions aux couches plus basses,2010-06-10,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[64162],['en'],25,"<p>ISO/TS 17575‑2:2010 defines how to convey all or parts of the data element structure defined in ISO/TS 17575‑1 over any communication stack and media suitable for this application. It is focussed on mobile communication links. However, wired links shall use the same methodology.</p><p>Th

51862,TS,,ISO/TS 17575-3:2011,Electronic fee collection — Application interface definition for autonomous systems — Part 3: Context data,Perception du télépéage — Définition de l'interface d'application pour les systèmes autonomes — Partie 3: Données du contexte,2011-04-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[64163],['en'],91,"<p>ISO/TS 17575 defines the information exchange between the Front End and the Back End in Electronic Fee Collection (EFC) based on autonomous on-board equipment (OBE). ISO/TS 17575-3:2011 defines the data to be used for a description of individual charging systems in terms of charged geographical objects and charging and reporting rules. For every Toll Char

63686,TS,Cor,ISO/TS 17575-3:2011/Cor 1:2013,Electronic fee collection — Application interface definition for autonomous systems — Part 3: Context data — Technical Corrigendum 1,Perception du télépéage — Définition de l'interface d'application pour les systèmes autonomes — Partie 3: Données du contexte — Rectificatif technique 1,2013-03-20,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[64163],['en'],3,

51863,TS,,ISO/TS 17575-4:2011,Electronic fee collection — Application interface definition for autonomous systems — Part 4: Roaming,Perception du télépéage — Définition de l'interface d'application pour les systèmes autonomes — Partie 4: Itinérance,2011-04-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[64164],['en'],24,"<p>ISO/TS 17575 defines the information exchange between the Front End and the Back End in Electronic Fee Collection (EFC) based on autonomous on-board equipment (OBE). ISO/TS 17575-4:2011 defines the functional details and data elements required to operate more than one EFC regime in parallel. The domains of these EFC regimes may or may not overlap. The charge rules of d

60045,TS,,ISO/TS 17582:2014,Quality management systems — Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government,Systèmes de management de la qualité — Exigences particulières pour l'application de l'ISO 9001:2008 aux organismes électoraux à tous les niveaux du gouvernement,2014-02-11,1,"['03.100.70','03.160']",ISO/TC 176,9599,,[75288],"['en','es','ru']",43,"<p>ISO/TS 17582:2014 specifies requirements for a quality management system where an electoral organization </p><ul><li>needs to demonstrate its ability to manage elections by secret ballot, which provide reliable, transparent, free and fair results that comply with electoral r

43188,TS,,ISO/TS 17665-2:2009,Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1,Stérilisation des produits de santé — Chaleur humide — Partie 2: Directives relatives à l'application de l'ISO 17665-1,2009-01-05,1,['11.080.01'],ISO/TC 198,9599,,[80271],"['en','fr']",47,"<p>ISO/TS 17665-2:2009 provides general guidance on the development, validation and routine control of moist heat sterilization processes and is intended to explain the requirements set forth in ISO 17665-1. The guidance given in this Technical Specification is provided to promote good practice related to moist heat sterilization processes and to assist those developing and

54997,TS,,ISO/TS 17665-3:2013,Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization,Stérilisation des produits de santé — Chaleur humide — Partie 3: Directives concernant la désignation d'un dispositif médical pour une famille de produits et catégorie de traitement pour la stérilisation à la vapeur,2013-04-12,1,['11.080.01'],ISO/TC 198,9599,,[80271],['en'],51,<p>ISO/TS 17665-3:2013 provides guidance about the attributes of a medical device to be considered by the user when assigning a medical device to a product family for the purpose of identifying and aligning it to a

60601,TS,,ISO/TS 17822-1:2014,"In vitro diagnostic test systems — Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens — Part 1: General requirements, terms and definitions","Systèmes d'essai pour diagnostic in vitro — Modes opératoires d'examen in vitro qualitatifs fondés sur l'acide nucléique pour la détection et l'identification d'agents pathogènes microbiens — Partie 1: Exigences générales, termes et définitions",2014-12-09,1,"['01.040.19','11.100.01']",ISO/TC 212,9599,,[67022],['en'],22,"<p>ISO/TS 17822-1:2014 is intended for</p><p>? IVD medical device manufacturers, medical laboratories, and research and development la

46525,TS,,ISO/TS 17837:2008,Processed cheese products — Determination of nitrogen content and crude protein calculation — Kjeldahl method,Fromages fondus — Détermination de la teneur en azote et calcul des protéines brutes — Méthode Kjeldahl,2008-03-06,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[61020],['en'],13,"<p>ISO/TS 17837|IDF/RM 25:2008 specifies a method for the determination of the nitrogen content and crude protein content by calculation in processed cheese products by using the Kjeldahl principle, both traditional and block digestion methods.</p>"

38514,TS,,ISO/TS 17892-1:2004,Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content,Reconnaissance et essais géotechniques — Essais de laboratoire sur les sols — Partie 1: Détermination de la teneur en eau,2004-10-21,1,"['13.080.20','93.020']",ISO/TC 182,9599,,[55243],"['en','fr']",6,"<p>ISO/TS 17892-1:2004 specifies the laboratory determination of the water (moisture) content of a soil test specimen by oven-drying within the scope of the geotechnical investigations according to prEN 1997-1 and prEN 1997-2. The water content is required as a guide to classification of natural soils and as a control criterion in re-compacted soils and is

43539,TS,Cor,ISO/TS 17892-1:2004/Cor 1:2006,Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content — Technical Corrigendum 1,Reconnaissance et essais géotechniques — Essais de laboratoire sur les sols — Partie 1: Détermination de la teneur en eau — Rectificatif technique 1,2006-01-10,1,"['13.080.20','93.020']",ISO/TC 182,9599,,[55243],['fr'],,

38523,TS,,ISO/TS 17892-10:2004,Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests,Reconnaissance et essais géotechniques — Essais de laboratoire des sols — Partie 10: Essai de cisaillement direct,2004-10-21,1,"['13.080.20','93.020']",ISO/TC 182,9599,,"[55252,72015]","['en','fr']",12,"<p>ISO/TS 17892-10:2004 specifies laboratory test methods to establish the effective shear strength parameter for soils within the scope of the geotechnical investigations according to prEN 1997-1 and -2.</p><p>The test method consists of placing the test specimen in the direct shear device, applying a pre-determined normal stress, providing for draining (and wettin