Withdrawn and superseded ISO standards — page 241 of 246

23778,TS,,ISO/TS 14798:2000,"Lifts (elevators), escalators and passenger conveyors — Risk analysis methodology","Ascenseurs, escaliers mécaniques et trottoirs roulants — Méthodologie de l'analyse du risque",2000-11-02,1,['91.140.90'],ISO/TC 178,9599,,[43047],"['en','fr']",20,

43047,TS,,ISO/TS 14798:2006,"Lifts (elevators), escalators and moving walks — Risk assessment and reduction methodology","Ascenseurs, escaliers mécaniques et trottoirs roulants — Méthodologie de l'évaluation et de la réduction du risque",2006-02-09,2,['91.140.90'],ISO/TC 178,9599,[23778],[46048],['en'],35,"<p>ISO/TS 14798:2006 establishes general principles and specific procedures for assessing risk.</p><p>The purpose of ISO/TS 14798:2006 is to provide a process for making decisions relevant to the safety of lifts during the</p><ul><li> design, construction, and installation of lifts, lift components, and systems;</li><li> developing generic procedures for the use, operation, testing, compli

79779,TS,,ISO/TS 14812:2022,Intelligent transport systems — Vocabulary,Systèmes de transport intelligents — Vocabulaire,2022-04-29,1,"['01.040.35','35.240.60','03.220.01','01.040.03']",ISO/TC 204,9599,,[85041],['en'],87,<p>This document defines terms relating to intelligent transport systems (ITS).</p>

25617,TS,,ISO/TS 14815:2000,Road transport and traffic telematics — Automatic vehicle and equipment identification — System specifications,Télématique de la circulation et du transport routier — Identification automatique des véhicules et équipements — Spécification des systèmes,2000-05-25,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[38666],['en'],31,

25618,TS,,ISO/TS 14816:2000,Road transport and traffic telematics — Automatic vehicle and equipment identification — Numbering and data structure,Télématique de la circulation et du transport routier — Identification automatique des véhicules et équipements — Codification et strucure des données,2000-05-25,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[38667],['en'],31,

31127,TS,,ISO/TS 14819-3:2000,Traffic and Travel Information (TTI) — TTI messages via traffic message coding — Part 3: Location referencing for ALERT-C,Information trafic et voyageurs (TTI) — Messages TTI via le codage de messages du trafic — Partie 3: Référence d'emplacement pour ALERT-C,2000-11-23,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[35984],['en'],33,

43456,TS,,ISO/TS 14823:2008,Traffic and travel information — Messages via media independent stationary dissemination systems — Graphic data dictionary for pre-trip and in-trip information dissemination systems,Informations sur le trafic et le tourisme — Messages par systèmes de dissémination stationnaire indépendants du support — Dictionnaire de données graphiques pour les systèmes de dissémination d'informations avant le trajet et durant le trajet,2008-07-16,1,"['35.240.60','43.040.15']",ISO/TC 204,9599,,[61546],['en'],173,"<p>ISO/TS 14823:2008 presents a system of standardized codes for existing signs and pictograms used to deliver traffic and traveller information (TTI). The coding system

39390,TS,,ISO/TS 14907-1:2005,Road transport and traffic telematics — Electronic fee collection — Test procedures for user and fixed equipment — Part 1: Description of test procedures,Télématique de la circulation et du transport routier — Perception du télépéage — Modes opératoires relatifs aux équipements embarqués et aux équipements fixes — Partie 1: Description des modes opératoires,2005-03-11,1,"['35.240.60','43.040.15']",ISO/TC 204,9599,,[52428],['en'],88,"<p>ISO/TS 14907-1:2005 specifies the test procedures of EFC road-side equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is specif

52428,TS,,ISO/TS 14907-1:2010,Electronic fee collection — Test procedures for user and fixed equipment — Part 1: Description of test procedures,Perception du télépéage — Modes opératoires relatifs aux équipements embarqués et aux équipements fixes — Partie 1: Description des modes opératoires,2010-05-31,2,"['35.240.60','43.040.15']",ISO/TC 204,9599,[39390],[67917],['en'],88,"<p>ISO/TS 14907-1:2010 specifies the test procedures of EFC road-side equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically.</p><p>ISO/TS 14907-1:2010 is restricted to sy

57203,TS,Cor,ISO/TS 14907-1:2010/Cor 1:2010,Electronic fee collection — Test procedures for user and fixed equipment — Part 1: Description of test procedures — Technical Corrigendum 1,Perception du télépéage — Modes opératoires relatifs aux équipements embarqués et aux équipements fixes — Partie 1: Description des modes opératoires — Rectificatif technique 1,2010-09-03,2,"['35.240.60','43.040.15']",ISO/TC 204,9599,,[67917],['en'],1,

67917,TS,,ISO/TS 14907-1:2015,Electronic fee collection — Test procedures for user and fixed equipment — Part 1: Description of test procedures,Perception du télépéage — Modes opératoires relatifs aux équipements embarqués et aux équipements fixes — Partie 1: Description des modes opératoires,2015-09-01,3,"['35.240.60','43.040.15']",ISO/TC 204,9599,"[52428,57203]",[78355],['en'],91,"<p>ISO/TS 14907-1:2015 specifies the test procedures of EFC roadside equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically.</p><p>ISO/TS 14907-1:2015 is restricted

40634,TS,,ISO/TS 14907-2:2006,Road transport and traffic telematics — Electronic fee collection — Test procedures for user and fixed equipment — Part 2: Conformance test for the onboard unit application interface,Télématique de la circulation et du transport routier — Perception du télépéage — Modes opératoires relatifs aux équipements embarqués et aux équipements fixes — Partie 2: Essai de conformité de l'interface d'application de l'unité embarquée,2006-06-19,1,"['35.240.60','43.040.15']",ISO/TC 204,9599,,[57381],['en'],92,"<p>ISO TS 14907-2:2006 describes tests that verify OBU conformance of implementations of functions and data structures, as defined in the implementation conformance sta

57381,TS,,ISO/TS 14907-2:2011,Electronic fee collection — Test procedures for user and fixed equipment — Part 2: Conformance test for the onboard unit application interface,Perception du télépéage — Modes opératoires relatifs aux équipements embarqués et aux équipements fixes — Partie 2: Essai de conformité de l'interface d'application de l'unité embarquée,2011-10-25,2,"['35.240.60','43.040.15']",ISO/TC 204,9599,[40634],[69781],['en'],79,"<p>ISO/TS 14907-2:2011 describes tests that verify on-board unit (OBU) conformance of implementations of functions and data structures, as defined in the implementation conformance statement based on ISO 14906:2011, for electronic fee collection (EFC) appli

69781,TS,,ISO/TS 14907-2:2016,Electronic fee collection — Test procedures for user and fixed equipment — Part 2: Conformance test for the on-board unit application interface,Perception du télépéage — Modes opératoires relatifs aux équipements embarqués et aux équipements fixes — Partie 2: Essai de conformité de l'interface d'application de l'unité embarquée,2016-07-07,3,"['35.240.60','43.040.15']",ISO/TC 204,9599,[57381],[81054],['en'],75,"<p>ISO/TS 14907-2:2016 describes tests that verify on-board unit (OBU) conformance of implementations of functions and data structures, as defined in the implementation conformance statement based on ISO 14906:2011/Amd1:2015, for electronic fee collection

53635,TS,,ISO/TS 14909:2012,Fibre ropes for offshore stationkeeping — High modulus polyethylene (HMPE),Cordages en fibres pour le maintien en position des structures marines — Polyéthylène à haut module,2012-04-24,1,['59.080.50'],ISO/TC 38,9599,,[77487],"['en','fr']",47,<p>ISO/TS 14909:2012 specifies the main characteristics and test methods of new high modulus polyethylene (HMPE) fibre ropes used for offshore stationkeeping.</p>

25281,TS,,ISO/TS 14934-1:2002,Fire tests — Calibration and use of radiometers and heat flux meters — Part 1: General principles,Essais au feu — Étalonnage des appareils de mesure du flux rayonné et du flux thermique — Partie 1: Principes généraux,2002-12-11,1,"['13.220.40','13.220.50']",ISO/TC 92/SC 1,9599,,[46058],['en'],20,"<p>ISO/TS 14934-1:2002 gives guidelines for calibration and use of radiometers and heat flux meters in fire testing and for correction of the sensitivity function due to convection effects.</p><p>It briefly describes the calibration methods, the most commonly used types of radiometers and heat flux meters, and the fire tests in which these transducers are used. </p><p>I

39067,TS,,ISO/TS 14934-4:2007,Fire tests — Calibration of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests,Essais au feu — Étalonnage et utilisation des appareils de mesure du flux thermique — Partie 4: Lignes directrices pour l'utilisation des fluxmètres thermiques dans les essais au feu,2007-02-09,1,"['13.220.40','13.220.50']",ISO/TC 92/SC 1,9599,,[60967],"['en','fr']",20,"<p>ISO/TS 14394-1:2007 provides guidance on the use of heat flux meters in fire testing applications, including the description and working principles of common heat flux meters and methods for their selection and maintenance. The guidance can also be applied to measuring heat flux from ra

41022,TS,,ISO/TS 15000-5:2005,"Electronic Business Extensible Markup Language (ebXML) — Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)","Commerce électronique en langage de balisage extensible (ebXML) — Partie 5: Spécification technique des composants principaux (ebXML), Version 2.01(ebCCTS)",2005-09-16,1,['35.040.50'],ISO/TC 154,9599,,[61433],['en'],113,"<p>ISO/TS 15000-5:2005 can be employed wherever business information is being shared or exchanged amongst and between enterprises, governmental agencies, and/or other organisations in an open and worldwide environment. </p><p>ISO/TS 15000-5:2005 will form the basis for standards development work of business anal

59225,TS,Amd,ISO/TS 15000-5:2005/Amd 1:2011,"Electronic Business Extensible Markup Language (ebXML) — Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS) — Amendment 1","Commerce électronique en langage de balisage extensible (ebXML) — Partie 5: Spécification technique des composants principaux (ebXML), Version 2.01(ebCCTS) — Amendement 1",2011-05-23,1,['35.040.50'],ISO/TC 154,9599,,[61433],['en'],6,

32149,TS,,ISO/TS 15007-2:2001,Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures,Véhicules routiers — Mesurage du comportement visuel du conducteur en relation avec les systèmes de contrôle et d'information sur le transport — Partie 2: Équipement et procédures,2001-12-20,1,"['13.180','43.040.15']",ISO/TC 22,9599,,[56622],['en'],8,"<p>This Technical Specification gives guidelines on equipment and procedures for analyzing driver visual behaviour, intended to enable assessors of Transport Information and Control Systems (TICS) to</p><ul><li>plan evaluation trials,</li><li>specify (and install) data

56622,TS,,ISO/TS 15007-2:2014,Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures,Véhicules routiers — Mesurage du comportement visuel du conducteur en relation avec les systèmes de contrôle et d'information sur le transport — Partie 2: Équipement et procédures,2014-08-22,2,"['13.180','43.040.15']",ISO/TC 22/SC 39,9599,[32149],[63220],['en'],14,"<p>ISO/TS 15007-2:2014 gives guidelines on equipment and procedures for analysing driver visual behaviour, intended to enable assessors of transport information and control systems (TICS) to</p><ul><li>plan evaluation trials;</li><li>specify (and install)

39570,TS,,ISO/TS 15011-5:2006,Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials,Hygiène et sécurité en soudage et techniques connexes — Méthode de laboratoire d'échantillonnage des fumées et des gaz — Partie 5: Identification des produits de dégradation thermique générés lors du soudage ou du coupage de produits entièrement ou partiellement constitués de matériaux organiques,2006-03-10,1,"['13.100','25.160.10']",ISO/TC 44/SC 9,9599,,[51458],['en'],18,"<p>ISO/TS 15011-5:2006 specifies procedur

59967,TS,,ISO/TS 15029-2:2012,Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilized flame heat release method,Produits pétroliers et produits connexes — Détermination des caractéristiques d'inflammation des fluides difficilement inflammables en jet pulvérisé — Partie 2: Essai de pulvérisation — Méthode par dégagement de chaleur d'une flamme stabilisée,2012-11-30,1,"['13.220.40','75.080']",ISO/TC 28,9599,,[66950],['en'],28,"<p>ISO/TS 15029-2:2012 specifies a method by which the fire hazards of pressurized sprays of fire-resistant fluids can be compared. Two sizes of propane flame are used to ignite and stabi

36685,TS,,ISO/TS 15077:2002,"Tractors and self-propelled machinery for agriculture and forestry — Operator controls — Actuating forces, displacement, location and method of operation","Tracteurs et machines agricoles et forestières automotrices — Commandes de l'opérateur — Forces de manoeuvre, déplacement, emplacement et mode de fonctionnement",2002-08-15,1,['65.060.01'],ISO/TC 23/SC 3,9599,"[9317,9303,9318]",[42812],"['en','fr']",14,"<p>ISO/TS 15077 gives the preferred method of operation, together with recommendations and requirements for the actuation, displacement and location, of operator controls installed on tractors and self-propelled machinery used in agriculture and forestry. It pr

67556,TS,,ISO/TS 15143-3:2016,Earth-moving machinery and mobile road construction machinery — Worksite data exchange — Part 3: Telematics data,Engins de terrassement et machines mobiles de construction de routes — Échange de données sur le chantier — Partie 3: Données télématiques,2016-11-28,1,"['53.100','35.240.99']",ISO/TC 127/SC 3,9599,,[76394],['en'],60,<p>ISO 15143-3:2016 specifies the communication schema designed to provide mobile machinery status data from a telematics provider's server to third-party client applications via the Internet. The data are collected from a mobile machine using telematics data-logging equipment and stored on a telematics provider's server. This document de

55382,TS,,ISO/TS 15216-1:2013,Microbiology of food and animal feed — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 1: Method for quantification,Microbiologie des aliments — Méthode horizontale pour la recherche des virus de l'hépatite A et norovirus dans les aliments par la technique RT-PCR en temps réel — Partie 1: Méthode de quantification,2013-03-07,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[65681],"['en','fr']",31,"<p>ISO/TS 15216-1:2013 describes a method for quantification of levels of HAV and NoV genogroup I (GI) and II (GII) RNA, from test samples of foodstuffs or food surfaces. Following liberation of viruses from the test sa

60297,TS,,ISO/TS 15216-2:2013,Microbiology of food and animal feed — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 2: Method for qualitative detection,Microbiologie des aliments — Méthode horizontale pour la recherche des virus de l'hépatite A et norovirus dans les aliments par la technique RT-PCR en temps réel — Partie 2: Méthode de détection qualitative,2013-03-07,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[74263],"['en','fr']",27,"<p>ISO/TS 15216-2:2013 describes a method for qualitative detection of HAV and NoV genogroups I (GI) and II (GII), from test samples of foodstuffs or food surfaces. Following liberation of viruses from the

57824,TS,,ISO/TS 15311-1:2016,Graphic technology — Requirements for printed matter for commercial and industrial production — Part 1: Measurement methods and reporting schema,Technologie graphique — Exigences pour les imprimés pour les productions industrielle et commerciale — Partie 1: Méthodes de mesure et schémas de rapport,2016-05-02,1,['37.100.01'],ISO/TC 130,9599,,[73371],['en'],16,"<p>ISO/TS 15311-1:2016 defines print metrics, measurement methods and reporting requirements for printed sheets that are suitable for all classes of printed products.</p><p>Guidance as to which of these metrics to apply to any given category of product along with acceptable conformance criteria is provided

73371,TS,,ISO/TS 15311-1:2019,Graphic technology — Print quality requirements for printed matter — Part 1: Measurement methods and reporting schema,Technologie graphique — Exigences de qualité d'impression pour les imprimés — Partie 1: Méthodes de mesure et schémas de rapport,2019-02-06,2,['37.100.01'],ISO/TC 130,9599,[57824],[77922],['en'],32,"<p>This document defines print quality metrics, measurement methods and reporting requirements for printed sheets that are suitable for all classes of printed products.</p><p>Guidance as to which of these metrics to apply to any given product category along with acceptable conformance criteria is provided in subsequent parts of ISO/TS 15311.</p><p>Alt

50331,TS,,ISO/TS 15338:2009,Surface chemical analysis — Glow discharge mass spectrometry (GD-MS) — Introduction to use,Analyse chimique des surfaces — Spectrométrie de masse à décharge luminescente (GD-MS) — Introduction à l'utilisation,2009-03-23,1,['71.040.40'],ISO/TC 201/SC 8,9599,,[70370],['en'],26,<p>ISO/TS 15338:2009 gives guidelines for the operation of glow discharge mass spectrometry (GD‑MS) instruments and recommendations for the use of GD‑MS. It is intended to be read in conjunction with the instrument manufacturers' manuals and recommendations.</p>

70370,TS,,ISO/TS 15338:2020,Surface chemical analysis — Glow discharge mass spectrometry — Operating procedures,Analyse chimique des surfaces — Spectrométrie de masse à décharge luminescente (GD-MS) — Introduction à l'utilisation,2020-03-05,2,['71.040.40'],ISO/TC 201/SC 8,9599,[50331],[87871],['en'],13,<p>This document gives procedures for the operation and use of glow discharge mass spectrometry (GD-MS). There are several GD-MS systems from different manufacturers in use and this document describes the differences in their operating procedures when appropriate.</p><p>NOTE This document is intended to be read in conjunction with the instrument manufacturers' manuals and recommendations.</

33025,TS,,ISO/TS 15510:2003,Stainless steels — Chemical composition,Aciers inoxydables — Composition chimique,2003-04-25,1,['77.140.20'],ISO/TC 17/SC 4,9599,[27298],[43159],"['en','fr']",15,"<p>ISO TS 15510:2003 lists the chemical compositions of stainless steels agreed by ISO/TC 17/SC 4 mainly on the basis of a composition of the specifications in existing ISO, ASTM, EN and JIS standards. They apply to all product forms including ingots and semi-finished material.</p>"

38695,TS,,ISO/TS 15530-3:2004,Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or standards,Spécification géométrique des produits (GPS) — Machines à mesurer tridimentionnelles (MMT): Technique pour la détermination de l'incertitude de mesure — Partie 3: Utilisation de pièces étalonnées ou des normes,2004-02-25,1,['17.040.30'],ISO/TC 213,9599,,[53627],['en'],16,"<p>ISO/TS 15530-3:2004 provides an experimental technique for simplifying the uncertainty evaluation of CMM measurements, whose approach (substitution measurements) leads to measurements being carried out in

62715,TS,,ISO/TS 15638-10:2013,Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 10: Emergency messaging system/eCall (EMS),Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 10: Système de messagerie d'urgence/appel életronique (EMS),2013-07-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[62036],['en'],53,"<p>ISO/TS 15638-10:2013 addresses the provision of Emergency messaging system/eCall and specifies the form and content of such data required to support such systems, and access methods to that data.<

62716,TS,,ISO/TS 15638-11:2013,Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 11: Driver work records (work and rest hours compliance) (DWR),Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 11: Enregistrements du travail des conducteurs (conformité des heures de travail et de repos),2013-08-05,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[62037],['en'],59,"<p>ISO/TS 15638-11:2013 addresses the provision of <i>?Driver Work Records' </i>and specifies the form and content of such data required to suppo

62717,TS,,ISO/TS 15638-12:2013,Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 12: Vehicle mass monitoring (VMM),Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 12: Monitorage de la masse des véhicules,2013-08-05,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[62038],['en'],56,"<p>ISO/TS 15638-12:2013 addresses the provision of <i>'Vehicle ?Mass' Monitoring' </i>and specifies the form and content of such data required to support such systems, and <i>access methods </i><i>(4.4)</i> to that data.</p><p>

62719,TS,,ISO/TS 15638-14:2013,Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 14: Vehicle access control (VAC),Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 14: Contrôle de l'accès des véhicules,2013-08-05,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[62052],['en'],50,"<p>ISO/TS 15638-14:2013 addresses the provision of <i>?Vehicle access control' </i>and specifies the form and content of such data required to support such systems, and <i>access methods </i><i>(4.3)</i> to that data.</p><p>ISO/TS

62721,TS,,ISO/TS 15638-15:2013,Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 15: Vehicle location monitoring (VLM),Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 15: Monitorage de la localisation des véhicules,2013-08-05,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[62053],['en'],50,"<p>ISO/TS 15638-15:2013 addresses the provision of <i>?Vehicle location monitoring' </i>and specifies the form and content of such data required to support such systems, and <i>access methods </i><i>(4.2)</i> to that

62722,TS,,ISO/TS 15638-16:2013,Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 16: Vehicle speed monitoring (VSM),Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 16: Monitorage de la vitesse des véhicules,2013-08-05,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[62054],['en'],54,"<p>ISO/TS 15638-16:2013 addresses the provision of <i>?Vehicle speed monitoring' </i>and specifies the form and content of such data required to support such systems, and <i>access methods </i><i>(4.2)</i> to that data.</p><

62723,TS,,ISO/TS 15638-17:2013,Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 17: Consignment and location monitoring (CLM),Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 17: Monitorage de livraison et localisation,2013-08-05,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[62055],['en'],47,"<p>ISO/TS 15638-17:2013 addresses the provision of <i>?Consignment and location monitoring' </i>and specifies the form and content of such data required to support such systems, and <i>access methods </i><i>(4.1)

62724,TS,,ISO/TS 15638-18:2013,Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 18: ADR (Dangerous Goods) transport monitoring (ADR),Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 18: Monitorage du transport (de biens dangereux) d'ADR,2013-07-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[62056],['en'],54,"<p>ISO/TS 15638-18:2013 addresses the provision of ADR (dangerous goods) and specifies the form and content of such data required to support such systems, and access methods to that data.</p><p>

59922,TS,,ISO/TS 15638-6:2013,Intelligent transport systems —- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 6: Regulated applications,Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 6: Applications réglementées,2013-08-05,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[59189],['en'],45,"<p>ISO/TS 15638-6:2013 specifies the common roles and responsibilities of actors providing <i>regulated application </i><i>(4.47)</i><i> </i>systems which use <i>TARV</i> to provide <i>regulated application services </i><i>(4.48)</i> for <i>regula

62704,TS,,ISO/TS 15638-8:2013,Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 8: Vehicle access monitoring (VAM),Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 8: Monitorage de l'accès des véhicules,2013-08-05,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[62034],['en'],50,"<p>ISO/TS 15638-8:2013 addresses the provision of <i>?Vehicle Access Management' (and monitoring) </i>and specifies the form and content of such data required to support such systems, and <i>access methods </i><i>(4.3)</i> to tha

62714,TS,,ISO/TS 15638-9:2013,Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 9: Remote electronic tachograph monitoring (RTM),Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 9: Monitorage du tachygraphe électronique à distance (RTM),2013-07-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,"[62035,70651]",['en'],47,"<p>ISO/TS 15638-9:2013 addresses the provision of Remote Tachograph Monitoring<i> </i>and specifies the form and content of such data required to support such systems, and access methods

28630,TS,,ISO/TS 15666:2003,Acoustics — Assessment of noise annoyance by means of social and socio-acoustic surveys,Acoustique — Évaluation de la gêne causée par le bruit au moyen d'enquêtes sociales et d'enquêtes socio-acoustiques,2003-01-15,1,['13.140'],ISO/TC 43/SC 1,9599,,[74048],"['en','fr']",15,"<p>ISO/TS 15666:2003 provides specifications for socio-acoustic surveys and social surveys which include questions on noise effects (briefly referred to hereafter as 'social surveys'). Its scope includes questions to be asked, response scales, key aspects of conducting the survey, and reporting the results. ISO/TS 15666:2003 does not prescribe methods for the analysis of data obtained from thes

28750,TS,,ISO/TS 15696:2000,Cranes — List of equivalent terms,Appareils de levage à charge suspendue — Listes de termes équivalents,2000-05-04,1,"['53.020.20','01.040.53']",ISO/TC 96/SC 2,9599,,[50813],"['en','fr','ru']",20,

27231,TS,,ISO/TS 15769:2000,Hydrometric determinations — Liquid flow in open channels and partly filled pipes — Guidelines for the application of Doppler-based flow measurements,Déterminations hydrométriques — Débit des liquides dans les canaux découverts et dans les conduites partiellement remplies — Lignes directrices pour l'application de mesurages du débit basés sur l'effet Doppler,2000-11-30,1,['17.120.20'],ISO/TC 113/SC 1,9599,,[42063],['en'],23,

63435,TS,,ISO/TS 15791-2:2017,Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products,Plastiques — Développement et utilisation des essais au feu à une échelle intermédiaire pour les produits plastiques — Partie 2: Utilisation des essais à une échelle intermédiaire pour les produits semi-finis et les produits finis,2017-06-30,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,[82204],['en'],14,"<p>ISO/TS 15791-2:2017 provides guidelines and specifies requirements for the development and use of intermediate-scale fire tests applicable to semi-finished and finished products made of,

65680,TS,,ISO/TS 15830-5:2017,Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 5: Dummy design updates,"Véhicules routiers — Conception et spécifications de performance pour le mannequin mondial (WorldSID), 50e percentile homme, de choc latéral — Partie 5: Mise à jour de conception applicables",2017-04-27,1,['43.020'],ISO/TC 22/SC 36,9599,,[74799],['en'],17,"<p>ISO/TS 15830-5:2017 specifies requirements and other design information which became available since 2013 for the WorldSID 50th percentile side-impact dummy, a standardized anthropomorphic dummy for side-impact tests of road vehicles. It is applicable to impact tests

74799,TS,,ISO/TS 15830-5:2018,Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 5: Dummy design updates,"Véhicules routiers — Conception et spécifications de performance pour le mannequin mondial (WorldSID), 50e percentile homme, de choc latéral — Partie 5: Mise à jour de conception applicables",2018-07-03,2,['43.020'],ISO/TC 22/SC 36,9599,[65680],"[93602,86631]",['en'],18,"<p>This document specifies requirements and other design information which became available since 2013 for the WorldSID 50th percentile side-impact dummy, a standardized anthropomorphic dummy for side-impact tests of road vehicles. It is applicable to impa

29403,TS,,ISO/TS 15874-7:2003,Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polypropylène (PP) — Partie 7: Guide pour l'évaluation de la conformité,2003-11-28,1,"['23.040.01','91.140.60']",ISO/TC 138/SC 2,9599,,[63009],"['en','fr']",12,"<p>ISO/TS 15874-7:2003 gives guidance for the assessment of conformity to be included in the manufacturer's quality plan as part of the manufacturer's quality system.</p><p>It includes:</p><ol><li>requirements for materials, components, joints and assemblies given in the applicable part(

29407,TS,,ISO/TS 15875-7:2003,Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène réticulé (PE-X) — Partie 7: Guide pour l'évaluation de la conformité,2003-11-28,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[63322],"['en','fr']",12,"<p>ISO/TS 15875-7:2003 gives guidance for the assessment of conformity to be included in the manufacturer's quality plan as part of the manufacturer's quality system.</p><p>It includes:</p><ol><li>requirements for materials, components, joints and assemblies given

29411,TS,,ISO/TS 15876-7:2003,Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 7: Guidance for the assessment of conformity,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polybutène (PB) — Partie 7: Guide pour l'évaluation de la conformité,2003-11-28,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[63014],"['en','fr']",12,"<p>ISO/TS 15876-7:2003 gives guidance for the assessment of conformity to be included in the manufacturer's quality plan as part of the manufacturer's quality system.</p><p>It includes:</p><ol><li>requirements for materials, components, joints and assemblies given in the applicable part(s) o

29415,TS,,ISO/TS 15877-7:2003,Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Poly(chlorure de vinyle) chloré (PVC-C) — Partie 7: Guide pour l'évaluation de la conformité,2003-11-28,1,"['23.040.20','23.040.01','91.140.60']",ISO/TC 138/SC 2,9599,,[41070],"['en','fr']",12,"<p>ISO/TS 15877-7:2003 gives guidance for the assessment of conformity to be included in the manufacturer's quality plan as part of the manufacturer's quality system.</p><p>It includes:</p><ol><li>requirements for materials, componen

41070,TS,,ISO/TS 15877-7:2009,Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Poly(chlorure de vinyle) chloré (PVC-C) — Partie 7: Guide pour l'évaluation de la conformité,2009-09-03,2,"['23.040.20','91.140.60','23.040.01']",ISO/TC 138/SC 2,9599,[29415],[63208],"['en','fr']",13,"<p>ISO 15877-7:2009 gives guidance for the assessment of conformity included in the manufacturer's quality plan as part of his/her quality system.</p><p>ISO 15877-7:2009 includes:</p><p>- provisions for materials, components,

41175,TS,,ISO/TS 15883-5:2005,Washer-disinfectors — Part 5: Test soils and methods for demonstrating cleaning efficacy,Laveurs désinfecteurs — Partie 5: Essais de souillures et méthodes pour démontrer l'efficacité de nettoyage,2005-11-23,1,['11.080.10'],ISO/TC 198,9599,,[68297],"['en','fr']",73,"<p>ISO/TS 15883-5:2005 includes the test soils and methods that can be used to demonstrate the cleaning efficacy of washer-disinfectors (WD) according to the ISO 15883 series of standards. </p><p>The inclusion of the test soils and methods in ISO/TS 15883-5:2005 does not indicate that they are of equivalent sensitivity in their determination of cleaning efficacy. </p><p>Acceptance criteria are includ

57859,TS,,ISO/TS 15926-11:2015,Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 11: Methodology for simplified industrial usage of reference data,"Systèmes d'automatisation industrielle et intégration — Intégration de données de cycle de vie pour les industries de 'process', y compris les usines de production de pétrole et de gaz — Partie 11: Méthodologie pour un usage industriel simplifié des données de référence",2015-05-12,1,"['25.040.40','75.020']",ISO/TC 184/SC 4,9599,,[79005],['en'],67,"<p>ISO/TS 15926-11:2015 defines a methodology for simplified industrial usage of reference data as def

41329,TS,,ISO/TS 15926-4:2007,Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 4: Initial reference data,"Systèmes d'automatisation industrielle et intégration — Intégration de données de cycle de vie pour les industries de 'process', y compris les usines de production de pétrole et de gaz — Partie 4: Données de référence initiales",2007-09-19,1,"['25.040.40','75.020']",ISO/TC 184/SC 4,9599,,[73830],['en'],19,<p>ISO/TS 15926-4:2007 defines the initial set of reference data for use with the ISO 15926 and ISO 10303-221 industrial data standards.</p>

53791,TS,Amd,ISO/TS 15926-4:2007/Amd 1:2010,Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 4: Initial reference data — Amendment 1,"Systèmes d'automatisation industrielle et intégration — Intégration de données de cycle de vie pour les industries de 'process', y compris les usines de production de pétrole et de gaz — Partie 4: Données de référence initiales — Amendement 1",2010-12-10,1,"['25.040.40','75.020']",ISO/TC 184/SC 4,9599,,[73830],['en'],12,

73830,TS,,ISO/TS 15926-4:2019,Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 4: Initial reference data,"Systèmes d'automatisation industrielle et intégration — Intégration de données de cycle de vie pour les industries de 'process', y compris les usines de production de pétrole et de gaz — Partie 4: Données de référence initiales",2019-10-18,2,"['25.040.40','75.020']",ISO/TC 184/SC 4,9599,"[41329,53791]",[81270],['en'],12,"<p>This document specifies the initial set of core reference data items which can be used to record information about process plants, including oil and gas production faci

56819,TS,,ISO/TS 15926-6:2013,Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 6: Methodology for the development and validation of reference data,"Systèmes d'automatisation industrielle et intégration — Intégration de données de cycle de vie pour les industries de 'process', y compris les usines de production de pétrole et de gaz — Partie 6: Méthodologie pour le développement et la validation des données de référence",2013-11-04,1,"['25.040.40','75.020']",ISO/TC 184/SC 4,9599,,"[70693,68241,84301]",['en'],59,<p>ISO/TS 15926-6:2013 defines a methodology for the stewarding of reference data for

50612,TS,,ISO/TS 15998-2:2012,Earth-moving machinery — Machine control systems (MCS) using electronic components — Part 2: Use and application of ISO 15998,Engins de terrassement — Systèmes de contrôle-commande utilisant des composants électroniques — Partie 2: Utilisation et application de l'ISO 15998,2012-10-15,1,['53.100'],ISO/TC 127/SC 3,9599,,"[75200,80996,70718,70715,73568]",['en'],58,"<p>ISO/TS 15998-2:2012 assists in the interpretation and application of the performance criteria and tests of functional safety for electronic machine control systems (MCS), used on earth-moving machinery, given in the first part of ISO 15998, by illustrating an alternative method of hazard assessment, p

30858,TS,,ISO/TS 16071:2003,Ergonomics of human-system interaction — Guidance on accessibility for human-computer interfaces,Ergonomie de l'interaction homme/système — Guidage relatif à l'accessibilité aux interfaces homme/ordinateur,2003-01-20,1,['13.180'],ISO/TC 159/SC 4,9599,,[39080],"['en','fr']",29,"<p>ISO/TS 16071:2002 provides guidance on the design of accessible (work, home, education) software. It covers issues associated with designing accessible software for people with the widest range of visual, hearing, motor and cognitive abilities, including those who are elderly and temporarily disabled. ISO/TS 16071:2002 addresses software considerations for accessibility that complement ge

55671,TS,,ISO/TS 16095:2014,Reclaimed rubber derived from products containing mainly natural rubber — Evaluation procedure,Caoutchouc régénéré dérivé principalement de produits contenant du caoutchouc naturel — Méthode d'évaluation,2014-04-01,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[82048],"['en','fr']",6,"<p>ISO/TS 16095:2014 defines</p><p>- the physical and chemical tests on raw reclaimed natural rubber, and</p><p>- the standard materials, standard test formulations, equipment, and processing methods for evaluating the vulcanization characteristics, and the mechanical properties of reclaimed natural rubber.</p>"

55672,TS,,ISO/TS 16096:2014,Reclaimed isobutene-isoprene (IIR) rubber — Evaluation procedure,Caoutchouc isobutène-isoprène (IIR) régénéré — Méthode d'évaluation,2014-04-01,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[82047],"['en','fr']",6,"<p>ISO/TS 16096:2014 specifies</p><p>- physical and chemical tests on raw reclaimed isobutene-isoprene (IIR) rubber, and</p><p>- standard materials, standard test formulations, equipment, and processing methods for evaluating the vulcanization characteristics and the mechanical properties of reclaimed isobutene-isoprene rubber.</p>"

37723,TS,,ISO/TS 16111:2006,Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride,Appareils de stockage de gaz transportables — Hydrogène absorbé dans un hydrure métallique réversible,2006-10-19,1,['71.100.20'],ISO/TC 197,9599,,[50366],['en'],22,"<p>ISO/TS 16111:2006 defines the requirements applicable to the safe design and use of transportable hydrogen gas storage canisters, including all necessary shut-off valve, pressure-relief devices (PRD), and appurtenances, intended for use with reversible metal hydride hydrogen storage systems. ISO/TS 16111:2006 only applies to refillable storage canisters where hydrogen is the only transferred media. Storage canisters in

55802,TS,,ISO/TS 16179:2012,Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials,Chaussures — Substances critiques potentiellement présentes dans les chaussures et les composants de chaussures — Détermination des composés organostanniques dans les matériaux de chaussures,2012-08-08,1,['61.060'],ISO/TC 216,9599,,[86845],"['en','fr']",12,<p>ISO/TS 16179:2012 specifies a test method for determining the presence of organotin compounds. This test method is applicable to all types of footwear materials.</p>

55803,TS,,ISO/TS 16181:2011,Footwear — Critical substances potentially present in footwear and footwear components — Determination of phthalates in footwear materials,Chaussures — Substances critiques potentiellement présentes dans les chaussures et les composants des chaussures — Détermination des phtalates dans les matériaux des chaussures,2011-07-01,1,['61.060'],ISO/TC 216,9599,,"[75392,75391]","['en','fr']",7,<p>ISO/TS 16181:2011 specifies a test method to determine the presence of phthalate compounds. This test method is applicable to all types of footwear materials.</p>

55804,TS,,ISO/TS 16186:2012,Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials,Chaussure — Substances critiques potentiellement présentes dans la chaussure et les composants de chaussure — Méthodes d'essai pour déterminer quantitativement le diméthylfumarate (DMFu) dans les matériaux de chaussure,2012-08-08,1,['61.060'],ISO/TC 216,9599,,[73588],"['en','fr']",8,"<p>ISO/TS 16186:2012 gives a test method for determining the amounts of dimethyl fumarate (DMFU) in footwear materials, dessicant sachets and other commodities. The test method is not applicable to metal parts.

55807,TS,,ISO/TS 16189:2013,Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine dimethylformamide in footwear materials,Chaussures — Substances critiques potentiellement présentes dans la chaussure et les composants de chaussure — Méthodes d'essai pour déterminer quantitativement le diméthylformamide dans les matériaux de chaussure,2013-07-16,1,['61.060'],ISO/TC 216,9599,,[78086],"['en','fr']",6,<p>ISO/TS 16189:2013 specifies a method to determine the amounts of dimethylformamide (DMFo) in footwear and footwear components containing polyurethane (PU) coated material.</p>

55808,TS,,ISO/TS 16190:2013,Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials,Chaussures — Substances critiques potentiellement présentes dans la chaussure et les composants de chaussure — Méthodes d'essai pour déterminer quantitativement les hydrocarbures aromatiques polycycliques (HAP) dans les matériaux de chaussure,2013-07-16,1,['61.060'],ISO/TC 216,9599,,[78087],"['en','fr']",6,<p>ISO/TS 16190:2013 specifies a method to determine the amounts of polycyclic aromatic hydrocarbons (PAH) in footwear and footwear components.</p>

55825,TS,,ISO/TS 16195:2013,Nanotechnologies — Guidance for developing representative test materials consisting of nano-objects in dry powder form,Nanotechnologies — Directives de développement de matériaux d'essai représentatifs constitués de nano-objets sous forme de poudre sèche,2013-05-07,1,['07.120'],ISO/TC 229,9599,,[73130],"['en','fr','ru']",8,"<p>ISO/TS 16195:2013 provides guidance for developing representative test materials consisting of nano-objects in dry powder form, to enable test method development and improve comparability of data for nanotechnology applications. This guidance includes the physico-chemical properties (specifically, size and shape, specific surface area, cryst

40621,TS,,ISO/TS 16281:2008,Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings,Roulements — Méthodes de calcul de la durée nominale de référence corrigée pour les roulements chargés universellement,2008-05-27,1,['21.100.20'],ISO/TC 4/SC 8,9599,,[80221],"['en','fr','ru']",20,"<p>ISO/TS 16281:2008 contains recommendations for the calculation of the modified reference rating life taking into consideration lubrication, contamination and fatigue load limit of the bearing material, as well as tilting or misalignment, operating clearance of the bearing and internal load distribution on rolling elements. The calculation method provided in IS

54086,TS,Cor,ISO/TS 16281:2008/Cor 1:2009,Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings — Technical Corrigendum 1,Roulements — Méthodes de calcul de la durée nominale de référence corrigée pour les roulements chargés universellement — Rectificatif technique 1,2009-04-23,1,['21.100.20'],ISO/TC 4/SC 8,9599,,[80221],"['en','fr','ru']",1,

37851,TS,,ISO/TS 16312-1:2004,Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment — Part 1: Criteria,Lignes directrices pour évaluer la validité des modèles de feu physiques pour l'obtention de données sur les effluents du feu en vue de l'évaluation des risques et dangers — Partie 1: Critères,2004-05-21,1,['13.220.99'],ISO/TC 92/SC 3,9599,,[41093],['en'],11,"<p>ISO 16312-1:2004 provides technical criteria and guidance for evaluating physical fire models (i.e. laboratory combustion devices and operating protocols) used in effluent toxicity studies for obtaining data on the effluent from products and material

37856,TS,,ISO/TS 16332:2006,Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency,Moteurs diesels — Filtres à carburant — Méthode d'évaluation de l'efficacité des séparateurs carburant-eau,2006-09-14,1,['43.060.40'],ISO/TC 22/SC 34,9599,,[44294],['en'],24,"<p>ISO/TS 16332:2006 specifies a fuel/water separation test with continuous water injection, using an offline water concentration measuring method, for evaluating the ability of a fuel filter to separate either finely or coarsely dispersed undissolved water out of fuel. This test is intended for application to filter elements which are installed upstream or downstream of the low pressure pump, having a rate

56761,TS,,ISO/TS 16401-1:2012,Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-2 — Part 1: Test suite structure and test purposes,Perception du télépéage — Évaluation de conformité de l'équipement à l'ISO/TS 17575-2 — Partie 1: Structure de la suite d'essais et objectifs d'essai,2012-02-24,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[70039],['en'],154,<p>ISO/TS 16401-1:2011 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the conformity of Front End Communications API and Front End application to ISO/TS 17575-2. </p>

56770,TS,,ISO/TS 16401-2:2012,Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-2 — Part 2: Abstract test suite,Perception du télépéage — Évaluation de conformité de l'équipement à l'ISO/TS 17575-2 — Partie 2: Suite d'essai abstraite,2012-02-24,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[70041],['en'],10,<p>ISO/TS 16401-2:2012 specifies the Abstract Test Suite (ATS) to evaluate the conformity of Front End Communications API and Front End Application to ISO/TS 17575-2.</p>

56695,TS,,ISO/TS 16407-1:2011,Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-1 — Part 1: Test suite structure and test purposes,Perception du télépéage — Évaluation de la conformité de l'équipement à l'ISO/TS 17575-1 — Partie 1: Structure de la suite d'essais et objectifs des essais,2011-10-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[69779],['en'],101,<p>ISO/TS 16407-1:2011 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the conformity of Front End and Back End to ISO/TS 17575-1. </p><p>The objective of ISO/TS 16407-1:2011 is to provide a basis for conformance tests for the Front End and the Back End in electronic fee col

56768,TS,,ISO/TS 16407-2:2012,Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-1 — Part 2: Abstract test suite,Perception de télépéage — Évaluation de conformité de l'équipement à l'ISO/TS 17575-1 — Partie 2: Suite de test abstraite,2012-02-24,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[70049],['en'],11,<p>ISO/TS 16407-2:2011 specifies the Abstract Test Suite (ATS) to evaluate the conformity of Front End and Back End to ISO/TS 17575-1. </p>

56696,TS,,ISO/TS 16410-1:2011,Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-3 — Part 1: Test suite structure and test purposes,Perception du télépéage — Évaluation de la conformité de l'équipement à l'ISO/TS 17575-3 — Partie 1: Structure de la suite d'essais et objectifs des essais,2011-10-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[69780],['en'],147,<p>ISO/TS 16410-1:2011 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the conformity of Front End and Back End to ISO/TS 17575-3. </p><p>The objective of ISO/TS 16410-1:2011 is to provide a basis for conformance tests for the Front End and the Back End in electronic fee col

56769,TS,,ISO/TS 16410-2:2012,Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-3 — Part 2: Abstract test suite,Perception du télépéage — Évaluation de la conformité de l'équipement à l'ISO/TS 17575-3 — Partie 2: Suite d'essais abstraite,2012-02-24,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[70050],['en'],12,<p>ISO/TS 16410-2:2011 specifies the Abstract Test Suite (ATS) to evaluate the conformity of Front End and Back End to ISO/TS 17575-3.</p>

30974,TS,,ISO/TS 16431:2002,Hydraulic fluid power — Assembled systems — Verification of cleanliness,Transmissions hydrauliques — Systèmes assemblés — Vérification de la propreté,2002-06-13,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[50158],"['en','fr']",8,<p>ISO/TS 16431 defines a procedure for measuring and verifying a desired cleanliness level in an assembled hydraulic fluid power system upon its release from the production area.</p>

51248,TS,,ISO/TS 16457:2009,Space systems — Space environment (natural and artificial) — The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere,Systèmes spatiaux — Environnement spatial (naturel et artificiel) — Modèle de l'ionosphère de la Terre: modèle de l'ionosphère internationale de référence (IRI) et extensions à la plasmasphère,2009-02-03,1,"['07.060','49.140']",ISO/TC 20/SC 14,9599,,[61556],['en'],7,"<p>ISO/TS 16457:2009 provides guidance to potential users for the specification of the global distribution of ionosphere densities and temperatures, as well as the total content of electrons in the height interval from 50 km to 1 5

71287,TS,,ISO/TS 16460:2016,Intelligent transport systems — Communications access for land mobiles (CALM) — Communication protocol messages for global usage,Systèmes de transport intelligents — Accès aux communications des services mobiles terrestres (CALM) — Messages de protocole de communication pour une utilisation globale,2016-08-15,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[81066],['en'],43,"<p>ISO/TS 16460:2016 specifies the following:</p><p>- the Localized Message (LM) format: an NPDU of a networking and transport layer protocol that does not support routing of a packet through a network;</p><p>- the Service Advertisement Message (SAM): an APDU to be transported in for

36805,TS,,ISO/TS 16528:2002,Boilers and pressure vessels — Registration of Codes and Standards to promote international recognition,Chaudières et récipients sous pression — Enregistrement des codes et normes afin de faciliter la reconnaissance internationale,2002-08-29,1,"['01.120','23.020.30','27.060.30']",ISO/TC 11,9599,,"[41079,41080]","['en','fr']",18,"<p>ISO/TS 16528:2002<i> </i>specifies the criteria and process for registration of boiler and pressure vessel Codes and Standards to promote international recognition, support safety and facilitate trade. </p><p>ISO/TS 16528:2002 is not applicable to Codes and Standards for nuclear components, railway and marine boilers, gas cylinders or p

41514,TS,,ISO/TS 16553:2006,Road vehicles — Data cables — Test methods and requirements,Véhicules routiers — Câbles de données — Méthodes d'essai et exigences,2006-02-15,1,['43.040.10'],ISO/TC 22,9599,[37985],[50023],['en'],9,"<p>ISO TS 16553:2006 specifies test methods, requirements for screened and unscreened, and sheathed and unsheathed twisted pair data cables, and coaxial cables intended for use in road vehicle applications.</p>"

42968,TS,,ISO/TS 16610-1:2006,Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts,Spécification géométrique des produits (GPS) — Filtrage — Partie 1: Vue d'ensemble et concepts de base,2006-11-03,1,['17.040.20'],ISO/TC 213,9599,,[61375],"['en','fr']",23,<p>ISO/TS 16610-1:2006 sets out the basic terminology for GPS filtration and the framework for the fundamental procedures used in GPS filtration.</p>

42969,TS,,ISO/TS 16610-20:2006,Geometrical product specifications (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts,Spécification géométrique des produits (GPS) — Filtrage — Partie 20: Filtres de profil linéaires: Concepts de base,2006-11-03,1,['17.040.20'],ISO/TC 213,9599,,[61376],"['en','fr']",13,<p>ISO/TS 16610-20:2006 sets out the basic concepts of linear profile filters.</p>

42970,TS,,ISO/TS 16610-22:2006,Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters,Spécification géométrique des produits (GPS) — Filtrage — Partie 22: Filtres de profil linéaires: Filtres splines,2006-11-03,1,['17.040.20'],ISO/TC 213,9599,,[61377],"['en','fr']",15,<p>ISO/TS 16610-22:2006 specifies spline filters for the filtration of profiles. It specifies in particular how to separate the long and short wave component of a profile.</p>

50123,TS,,ISO/TS 16610-28:2010,Geometrical product specifications (GPS) — Filtration — Part 28: Profile filters: End effects,Spécification géométrique des produits (GPS) — Filtrage — Partie 28: Filtres de profil: Effets de bords,2010-08-13,1,['17.040.20'],ISO/TC 213,9599,,[66241],"['en','fr']",18,<p>ISO 16610-28:2010 provides methods for treating the end effects of linear profile filters where such effects occur.</p>

42971,TS,,ISO/TS 16610-29:2006,Geometrical product specifications (GPS) — Filtration — Part 29: Linear profile filters: Spline wavelets,Spécification géométrique des produits (GPS) — Filtrage — Partie 29: Filtres de profil linéaires: Ondelettes splines,2006-11-03,1,['17.040.20'],ISO/TC 213,9599,,[61378],"['en','fr']",17,"<p>ISO/TS 16610-29:2006 specifies spline wavelets for profiles, and contains the relevant concepts. It gives the basic terminology for spline wavelets of compact support, together with their usage.</p>"

50177,TS,,ISO/TS 16610-30:2009,Geometrical product specifications (GPS) — Filtration — Part 30: Robust profile filters: Basic concepts,Spécification géométrique des produits (GPS) — Filtrage — Partie 30: Filtres de profil robustes: Concepts de base,2009-03-10,1,['17.040.20'],ISO/TC 213,9599,,[62881],"['en','fr']",14,<p>ISO/TS 16610-30:2009 specifies the basic concepts of robust profile filters.</p>

42972,TS,,ISO/TS 16610-31:2010,Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters,Spécification géométrique des produits (GPS) — Filtrage — Partie 31: Filtres de profil robustes: Filtres de régression gaussiens,2010-08-13,1,['17.040.20'],ISO/TC 213,9599,,[66242],"['en','fr']",12,<p>ISO 16610-31:2010 specifies the characteristics of the discrete robust Gaussian regression filter for the evaluation of surface profiles with spike discontinuities such as deep valleys and high peaks.</p>

42973,TS,,ISO/TS 16610-32:2009,Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters,Spécification géométrique des produits (GPS) — Filtrage — Partie 32: Filtres de profil robustes: Filtres splines,2009-03-10,1,['17.040.20'],ISO/TC 213,9599,,"[62882,82722]","['en','fr']",10,<p>ISO/TS 16610-32:2009 specifies the characteristics of robust spline filters for surface profiles.</p><p>It specifies in particular how to separate the long and short wave content of a surface profile.</p>

42974,TS,,ISO/TS 16610-40:2006,Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts,Spécification géométrique des produits (GPS) — Filtrage — Partie 40: Filtres de profil morphologiques: Concepts de base,2006-11-03,1,['17.040.20'],ISO/TC 213,9599,,[61379],"['en','fr']",16,"<p>ISO/TS 16610-40:2006 sets out the basic concepts and terminology for morphological operations and filters, including envelope filters.</p>"

42975,TS,,ISO/TS 16610-41:2006,Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters,Spécification géométrique des produits (GPS) — Filtrage — Partie 41: Filtres de profil morphologiques: Filtre disque et filtre segment de droite horizontal,2006-11-03,1,['17.040.20'],ISO/TC 213,9599,,[61380],"['en','fr']",14,"<p>ISO/TS 16610-41:2006 specifies techniques for computing morphological filters with disk and horizontal segment structuring elements, including envelope filters.</p>"

42976,TS,,ISO/TS 16610-49:2006,Geometrical product specifications (GPS) — Filtration — Part 49: Morphological profile filters: Scale space techniques,Spécification géométrique des produits (GPS) — Filtrage — Partie 49: Filtres de profil morphologiques: Techniques d'analyse par espace d'échelle,2006-11-03,1,['17.040.20'],ISO/TC 213,9599,,[61381],"['en','fr']",17,<p>ISO/TS 16610-49:2006 specifies morphological scale space techniques. The basic terminology for scale space techniques is given together with their usage. </p>

31034,TS,,ISO/TS 16628:2003,Tracheobronchial tubes — Recommendations for size designation and labelling,Sondes trachéo-bronchiques — Recommandations pour la désignation de grandeur et le marquage,2003-08-11,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[44167],['en'],7,"<p>ISO/TS 16628:2003 provides recommendations for the size designation and labelling of tracheobronchial tubes, including colour coding of the bronchial cuff and its associated pilot balloon. Tracheobronchial tubes that include bronchus blockers are excluded from the scope of this Technical Specification.</p>"

30394,TS,,ISO/TS 16630:2003,Metallic materials — Method of hole expanding test,Matériaux métalliques — Méthode d'essai d'expansion de trou,2003-06-05,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[42813],"['en','fr']",6,"<p>ISO/TS 16630:2003 describes a method of determining the hole expansion ratio in metallic sheets and strips with a thickness range of 1,2 mm to 6 mm inclusive and a width of at least 90 mm.</p>"