Withdrawn and superseded ISO standards — page 21 of 246

65101,IS,,ISO 11443:2014,Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers,Plastiques — Détermination de la fluidité au moyen de rhéomètres équipés d'une filière capillaire ou plate,2014-03-18,3,['83.080.01'],ISO/TC 61/SC 5,9599,[35559],[80003],['en'],36,"<p>ISO 11443:2014 specifies methods for determining the fluidity of plastics melts subjected to shear stresses at rates and temperatures approximating to those arising in plastics processing. Testing plastics melts in accordance with these methods is necessary since the fluidity of plastics melts is generally not dependent solely on temperature, but also on other parameters, in particular shear rat

19389,IS,,ISO 11446:1993,Passenger cars and light commercial vehicles with 12 V systems — 13-pole connectors between towing vehicles and trailers — Dimensions and contact allocation,Voitures particulières et véhicules utilitaires légers équipés d'un système électrique 12 V — Connecteurs à 13 contacts pour liaison entre véhicules tracteurs et remorques — Dimensions et affectation des contacts,1993-12-09,1,['43.040.10'],ISO/TC 22,9599,,[25848],"['en','fr']",6,

25848,IS,,ISO 11446:1995,Passenger cars and light commercial vehicles with 12 V systems — 13-pole connectors between towing vehicles and trailers — Dimensions and contact allocation,Voitures particulières et véhicules utilitaires légers équipés d'un système électrique 12 V — Connecteurs à 13 contacts pour liaison entre le véhicule tracteur et le véhicule tracté — Dimensions et affectation des contacts,1995-08-03,2,['43.040.10'],ISO/TC 22,9599,[19389],[30204],"['en','fr']",6,<p>Specifies dimensions and specific requirements for the 13-pole connector between passenger cars or light commercial vehicles and their trailers equipped with 12 V systems and the contact allocation to ensure interchang

27063,IS,Amd,ISO 11446:1995/Amd 1:1997,Passenger cars and light commercial vehicles with 12 V systems — 13-pole connectors between towing vehicles and trailers — Dimensions and contact allocation — Amendment 1,Voitures particulières et véhicules utilitaires légers équipés d'un système électrique 12 V — Connecteurs à 13 contacts pour liaison entre le véhicule tracteur et le véhicule tracté — Dimensions et affectation des contacts — Amendement 1,1997-12-18,2,['43.040.10'],ISO/TC 22,9599,,[30204],"['en','fr']",1,

30204,IS,,ISO 11446:2004,Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage,Véhicules routiers — Connecteurs pour liaisons électriques entre véhicules tracteurs et véhicules tractés — Connecteurs à 13 contacts pour les véhicules à tension nominale de 12 V,2004-01-12,3,['43.040.10'],ISO/TC 22,9599,"[25848,27063]","[55704,51374]","['en','fr']",9,"<p>ISO 11446:2004 specifies the dimensional characteristics of, and contact allocation and tests and requirements for, 13-pole connectors for the electrical connection of towing and towed vehicles with 12 V nominal supply voltage. It also specifies a

19394,IS,,ISO 11451-1:1995,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 1: General and definitions,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique à bande étroite — Méthodes d'essai des véhicules — Partie 1: Généralités et définitions,1995-11-23,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,"[24563,29007]",['en'],8,

27000,IS,Cor,ISO 11451-1:1995/Cor 1:1996,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 1: General and definitions — Technical Corrigendum 1,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique à bande étroite — Méthodes d'essai des véhicules — Partie 1: Généralités et définitions — Rectificatif technique 1,1996-06-06,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,[29007],['en'],1,

29007,IS,,ISO 11451-1:2001,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General and definitions,Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 1: Généralités et définitions,2001-04-26,2,"['43.040.10','33.100.20']",ISO/TC 22,9599,"[19394,27000]",[37998],"['en','fr']",15,

37998,IS,,ISO 11451-1:2005,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology,Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 1: Principes généraux et terminologie,2005-02-22,3,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[29007],[62477],"['en','fr']",17,"<p>ISO 11451-1:2005 specifies general conditions, defines terms, gives practical guidelines and establishes the basic principles of the vehicle tests used in the other parts of ISO 11451 for determining the immunity of p

45932,IS,Amd,ISO 11451-1:2005/Amd 1:2008,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology — Amendment 1,Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 1: Principes généraux et terminologie — Amendement 1,2008-01-07,3,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,,[62477],"['en','fr']",4,

62477,IS,,ISO 11451-1:2015,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology,Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 1: Principes généraux et terminologie,2015-06-02,4,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,"[45932,37998]",[83227],['en'],25,"<p>ISO 11451-1:2015 specifies general conditions, defines terms, gives practical guidelines, and establishes the basic principles of the vehicle tests used in the other parts of ISO 11451, for determining the immunity o

19395,IS,,ISO 11451-2:1995,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 2: Off-vehicle radiation source,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique à bande étroite — Méthodes d'essai des véhicules — Partie 2: Source de rayonnement hors du véhicule,1995-11-23,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,[28530],['en'],10,

24564,IS,Amd,ISO 11451-2:1995/Amd 1:1997,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 2: Off-vehicle radiation source — Amendment 1,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique à bande étroite — Méthodes d'essai des véhicules — Partie 2: Source de rayonnement hors du véhicule — Amendement 1,1997-08-21,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,[28530],"['en','fr']",7,

27093,IS,Cor,ISO 11451-2:1995/Cor 1:1996,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 2: Off-vehicle radiation source — Technical Corrigendum 1,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique à bande étroite — Méthodes d'essai des véhicules — Partie 2: Source de rayonnement hors du véhicule — Rectificatif technique 1,1996-08-08,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,[28530],['en'],1,

28530,IS,,ISO 11451-2:2001,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Off-vehicle radiation sources,Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 2: Sources de rayonnement hors du véhicule,2001-04-26,2,"['43.040.10','33.100.20']",ISO/TC 22,9599,"[19395,27093,24564]",[37999],"['en','fr']",14,

37999,IS,,ISO 11451-2:2005,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Off-vehicle radiation sources,Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 2: Sources de rayonnement hors du véhicule,2005-02-08,3,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[28530],[59608],"['en','fr']",13,"<p>ISO 11451-2:2005 specifies a vehicle test method for determining the immunity of passenger cars and commercial vehicles to electrical disturbances from off-vehicle radiation sources, regardless of the vehicle propulsi

59608,IS,,ISO 11451-2:2015,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Off-vehicle radiation sources,Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 2: Sources de rayonnement hors du véhicule,2015-06-02,4,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[37999],[83228],['en'],25,"<p>ISO 11451-2:2015 specifies a method for testing the immunity of passenger cars and commercial vehicles to electrical disturbances from off-vehicle radiation sources, regardless of the vehicle propulsion system (e.g. spark ig

19396,IS,,ISO 11451-3:1994,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 3: On-board transmitter simulation,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique à bande étroite — Méthodes d'essai des véhicules — Partie 3: Simulation d'un émetteur embarqué,1994-12-08,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,"[42937,37439,24565]",['en'],4,"<p>Lays down on-board transmitter simulation test methods and procedures, for testing passenger cars and commercial vehicles regardless of the propulsion system. The electromagnetic disturbances considered in this part are limited to continuous na

37439,IS,,ISO 11451-3:2007,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation,Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 3: Simulation des émetteurs embarqués,2007-06-20,2,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[19396],[59604],"['en','fr']",21,"<p>ISO 11451-3:2007 specifies methods for testing the immunity of passenger cars and commercial vehicles to electromagnetic disturbances from on-board transmitters connected to an external antenna and portable transmitters

59604,IS,,ISO 11451-3:2015,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation,Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 3: Simulation des émetteurs embarqués,2015-06-02,3,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[37439],[83229],['en'],54,"<p>ISO 11451-3:2015 specifies methods for testing the immunity of passenger cars and commercial vehicles to electromagnetic disturbances from on-board transmitters connected to an external antenna and portable transmitters with in

19397,IS,,ISO 11451-4:1995,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 4: Bulk current injection (BCI),Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique à bande étroite — Méthodes d'essai des véhicules — Partie 4: Méthode d'injection de courant (BCI),1995-11-23,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,"[24566,38000]",['en'],8,<p>Specifies bulk current injection (BCI) test methods and procedures for the determination of the electromagnetic compatibility of electronic components of passenger cars and commercial vehicles regardless of the propulsion system. The electromagnetic d

38000,IS,,ISO 11451-4:2006,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI),Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 4: Méthode d'injection de courant (BCI),2006-06-19,2,"['43.040.10','33.100.20']",ISO/TC 22,9599,[19397],[60609],"['en','fr']",8,"<p>ISO 11451-4:2006 specifies bulk current injection (BCI) test methods and procedures for testing the electromagnetic immunity of electronic components for passenger cars and commercial vehicles regardless of the propulsion system

60609,IS,,ISO 11451-4:2013,Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI),Véhicules routiers — Méthodes d'essai d'un véhicule soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 4: Méthode d'injection de courant (BCI),2013-03-25,3,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[38000],[79797],"['en','fr']",8,"<p>ISO 11451-4:2013 specifies bulk current injection (BCI) test methods for testing the electromagnetic immunity of electronic components for passenger cars and commercial vehicles regardless of the propulsion system (e.g. sp

19398,IS,,ISO 11452-1:1995,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 1: General and definitions,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique à bande étroite — Méthodes d'essai des composants — Partie 1: Généralités et définitions,1995-11-23,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,[24567],['en'],9,

24567,IS,,ISO 11452-1:2001,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General and definitions,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 1: Généralités et définitions,2001-05-03,2,"['43.040.10','33.100.20']",ISO/TC 22,9599,[19398],[38001],"['en','fr']",17,

38001,IS,,ISO 11452-1:2005,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 1: Principes généraux et terminologie,2005-02-02,3,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[24567],[59609],"['en','fr']",19,"<p>ISO 11452-1:2005 specifies general conditions, defines terms, gives practical guidelines and establishes the basic principles of the component tests used in the other parts of ISO 11452 for determining the immunit

45933,IS,Amd,ISO 11452-1:2005/Amd 1:2008,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology — Amendment 1,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 1: Principes généraux et terminologie — Amendement 1,2008-01-07,3,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,,[59609],"['en','fr']",4,

59609,IS,,ISO 11452-1:2015,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 1: Principes généraux et terminologie,2015-06-02,4,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,"[38001,45933]",[83225],['en'],33,"<p>ISO 11452-1:2015 specifies general conditions, defines terms, gives practical guidelines, and establishes the basic principles of the component tests used in the other parts of ISO 11452 for determining the immun

19399,IS,,ISO 11452-2:1995,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 2: Absorber-lined chamber,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique à bande étroite — Méthodes d'essai des composants — Partie 2: Chambre anéchoïque,1995-11-23,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,"[36570,24568]",['en'],9,"<p>Specifies procedures for testing electromagnetic immunity (off-vehicle radiation sources) of electronic components of passenger cars and commercial vehicles in an absorber-lined chamber, regardless of the propulsion system. The electromagnetic disturbance considered is l

36570,IS,,ISO 11452-2:2004,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 2: Chambre anéchoïque,2004-10-27,2,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[19399],"[68557,59610]","['en','fr']",14,"<p>ISO 11452-2:2004 specifies an absorber-lined shielded enclosure method for testing the immunity (off-vehicle radiation source) of electronic components for passenger cars and commercial vehicles regardless of the propulsio

19400,IS,,ISO 11452-3:1995,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 3: Transverse electromagnetic mode (TEM) cell,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Méthodes d'essai d'un composant — Partie 3: Cellule TEM,1995-11-23,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,[24569],['en'],12,

24569,IS,,ISO 11452-3:2001,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic mode (TEM) cell,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 3: Cellule à mode électromagnétique transverse (TEM),2001-03-08,2,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[19400],[66829],"['en','fr']",17,

66829,IS,,ISO 11452-3:2016,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 3: Cellule électromagnétique transverse (TEM),2016-08-30,3,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[24569],[87528],['en'],21,"<p>ISO 11452-3:2016 specifies transverse electromagnetic (TEM) cell tests for determining the immunity of electronic components of passenger cars and commercial vehicles to electrical disturbances from narrowband

19401,IS,,ISO 11452-4:1995,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 4: Bulk current injection (BCI),Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Méthodes d'essai d'un composant — Partie 4: Méthode d'injection de courant (BCI),1995-11-23,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,[24570],['en'],9,

24570,IS,,ISO 11452-4:2001,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI),Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 4: Méthodes d'injection de courant (BCI),2001-02-08,2,"['43.040.10','33.100.20']",ISO/TC 22,9599,[19401],[37414],"['en','fr']",14,

37414,IS,,ISO 11452-4:2005,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI),Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 4: Méthodes d'injection de courant (BCI),2005-04-12,3,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,[24570],[54500],"['en','fr']",22,"<p>ISO 11452-4:2005 specifies bulk current injection (BCI) test methods for determining the immunity of electronic components of passenger cars and commercial vehicles regardless of the propulsion system (e.g. spark-ign

54749,IS,Cor,ISO 11452-4:2005/Cor 1:2009,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI) — Technical Corrigendum 1,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 4: Méthodes d'injection de courant (BCI) — Rectificatif technique 1,2009-07-21,3,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,,[54500],"['en','fr']",2,

54500,IS,,ISO 11452-4:2011,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Harness excitation methods,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 4: Méthodes d'excitation des faisceaux,2011-12-09,4,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,"[54749,37414]",[74108],['en'],29,

19402,IS,,ISO 11452-5:1995,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 5: Stripline,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Méthodes d'essai d'un composant — Partie 5: Ligne TEM à plaques,1995-11-23,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,[24571],['en'],10,<p>Specifies tests for electromagnetic compatibility of electronic components for passenger cars and commercial vehicles regardless of the propulsion system. The electromagnetic disturbances considered are limited to continuous narrowband electromagnetic fields. The tests are not suitable for

19404,IS,,ISO 11452-7:1995,Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 7: Direct radio frequency (RF) power injection,Véhicules routiers — Perturbations électriques par rayonnement d'énergie électromagnétique à bande étroite — Méthodes d'essai des composants — Partie 7: Injection directe de puissance à fréquence,1995-11-23,1,"['43.040.10','33.100.20']",ISO/TC 22,9599,,[38302],['en'],8,"<p>Specifies direct RF power injection tests for electromagnetic immunity of electronic components of passenger cars and commercial vehicles, regardless of the propulsion system. The electromagnetic disturbance considered is limited to

40831,IS,,ISO 11452-8:2007,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 8: Méthodes d'immunité aux champs magnétiques,2007-06-19,1,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,,[59605],"['en','fr']",17,"<p>ISO 11452-8:2007 specifies tests for the electromagnetic immunity of electronic components for passenger cars and commercial vehicles, regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, ele

51670,IS,,ISO 11452-9:2012,Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 9: Portable transmitters,Véhicules routiers — Méthodes d'essai d'un équipement soumis à des perturbations électriques par rayonnement d'énergie électromagnétique en bande étroite — Partie 9: Émetteurs portables,2012-05-16,1,"['43.040.10','33.100.20']",ISO/TC 22/SC 32,9599,,[76117],['en'],47,"<p>ISO 11452-9:2012 specifies test methods and procedures for testing electromagnetic immunity to portable transmitters of electronic components for passenger cars and commercial vehicles, regardless of the propulsion system (e.g. spark-ignition engine, dies

19411,IS,,ISO 11460:1993,Two-wheeled motorcycles — Positioning of lighting and light-signalling devices,Motocycles à deux roues — Position des dispositifs d'éclairage et de signalisation lumineuse,1993-03-11,1,['43.140'],ISO/TC 22,9599,,[41873],"['en','fr']",5,"<p>Specifies the requirements (position and orientation) for the main-beam headlamp, dipped-beam headlamp, front position lamp, side and rear reflex-reflecting device, direction indicator lamp, stop lamp, rear position lamp, rear registration plate lamp, hazard warning lamp, front fog lamp, rear fog lamp.</p>"

19414,IS,,ISO 11463:1995,Corrosion of metals and alloys — Evaluation of pitting corrosion,Corrosion des métaux et alliages — Évaluation de la corrosion par piqûres,1995-12-27,1,['77.060'],ISO/TC 156,9599,,[73318],"['en','fr']",10,<p>Gives guidance on the selection of procedures that can be used in the identification and examination of pits and in the evaluation of pitting corrosion.</p>

19415,IS,,ISO 11464:1994,Soil quality — Pretreatment of samples for physico-chemical analyses,Qualité du sol — Prétraitement des échantillons pour analyses physico-chimiques,1994-09-22,1,['13.080.05'],ISO/TC 190/SC 3,9599,,[37718],"['en','fr']",9,"<p>Specifies the pretreatments required for soil samples that are to be subjected to physico-chemical analyses and describes the five types of pretreatment of samples: drying, crushing, sieving, dividing and milling. The pretreatment procedures described herein are not applicable if they affect the results of the determinations to be made.</p>"

20886,IS,,ISO 11465:1993,Soil quality — Determination of dry matter and water content on a mass basis — Gravimetric method,Qualité du sol — Détermination de la teneur pondérale en matière sèche et en eau — Méthode gravimétrique,1993-12-09,1,['13.080.20'],ISO/TC 190/SC 3,9599,,[88192],"['en','fr']",3,"<p>The method specified can be applied to all types of soil samples. Different procedures are specified for air-dried soil samples, e.g. samples pretreated according to ISO 11464, and for field-moist soil samples. Its principle is drying soil samples to constant mass at 105 °C and using the difference in mass of an amount of soil before and after the drying procedure to calculate the dry matter

23695,IS,Cor,ISO 11465:1993/Cor 1:1994,Soil quality — Determination of dry matter and water content on a mass basis — Gravimetric method — Technical Corrigendum 1,Qualité du sol — Détermination de la teneur pondérale en matière sèche et en eau — Méthode gravimétrique — Rectificatif technique 1,1994-04-21,1,['13.080.20'],ISO/TC 190/SC 3,9599,,[88192],['en'],1,

19421,IS,,ISO 11469:1993,Plastics — Generic identification and marking of plastic products,Plastiques — Identification générique et marquage des produits plastiques,1993-06-24,1,['83.080.01'],ISO/TC 61/SC 1,9599,,[27946],"['en','fr']",4,

27946,IS,,ISO 11469:2000,Plastics — Generic identification and marking of plastics products,Plastiques — Identification générique et marquage des produits en matière plastique,2000-05-11,2,['83.080.01'],ISO/TC 61/SC 1,9599,[19421],[63434],"['en','fr']",3,

5689,IS,,ISO 1147:1975,Plastics — Aqueous dispersions of polymers and copolymers — Freeze-thaw cycle stability test,Matières plastiques — Dispersions aqueuses de polymères et copolymères — Essai de stabilité à des alternances de gel et de dégel,1975-06-01,1,['83.080.01'],ISO/TC 61,9599,,[5690],"['en','fr']",1,

5690,IS,,ISO 1147:1988,Plastics — Polymer dispersions — Freeze-thaw cycle stability test,Plastiques — Dispersions de polymères — Essai de stabilité à des alternances de gel et de dégel,1988-12-01,2,['83.080'],ISO/TC 61/SC 9,9599,[5689],[24339],"['en','fr']",1,

19423,IS,,ISO 11471:1995,Agricultural tractors and machinery — Coding of remote hydraulic power services and controls,Tracteurs et matériels agricoles — Codage des commandes et services hydrauliques à distance,1995-02-23,1,['65.060.10'],ISO/TC 23/SC 4,9599,,"[81106,90394]","['en','fr']",2,"<p>Specifies the coding to be used to identify the couplings and controls for the remote hydraulic power services of agricultural tractors, machinery and implements.</p>"

19427,IS,,ISO 11475:1999,"Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)","Papier et carton — Détermination du degré de blanc CIE, D65/10 degrés (lumière du jour extérieure)",1999-03-11,1,['85.060'],ISO/TC 6,9599,,[39743],"['en','fr']",12,

39743,IS,,ISO 11475:2004,"Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)","Papier et carton — Détermination du degré de blanc CIE, D65/10 degrés (lumière du jour extérieure)",2004-11-18,2,['85.060'],ISO/TC 6,9599,[19427],[63614],"['en','fr']",12,"<p>ISO 11475:2004 specifies the procedure to be used for determining the whiteness of papers and boards. The values obtained correspond to the visual appearance of white papers and boards with or without fluorescent whitening agents when they are viewed under the CIE D65 daylight illuminant. It is based on reflectance data obtained over the full visible spectral range (VIS) in contrast to the measurement of ISO b

19428,IS,,ISO 11476:2000,"Paper and board — Determination of CIE-whiteness, C/2 degree (indoor illumination conditions)",Papier et carton — Détermination du degré de blanc CIE C/2 degrés (éclairage intérieur),2000-11-23,1,['85.060'],ISO/TC 6,9599,,[44136],"['en','fr']",13,

44136,IS,,ISO 11476:2010,"Paper and board — Determination of CIE whiteness, C/2 degrees (indoor illumination conditions)",Papier et carton — Détermination du degré de blanc CIE C/2 degrés (éclairage intérieur),2010-07-16,2,['85.060'],ISO/TC 6,9599,[19428],[63597],"['en','fr']",13,"<p>ISO 11476:2010 specifies the procedure to be used for determining the CIE whiteness of papers and boards, in order to obtain values which correspond to the visual appearance of white papers and boards, with or without fluorescent whitening agents, when they are viewed indoors. It is based on radiance factor data obtained over the full visible spectral range (VIS) in contrast to the measurement of ISO brightness,

5691,IS,,ISO 1148:1980,Plastics — Aqueous dispersions of polymers and copolymers — Determination of pH,Plastiques — Dispersions aqueuses de polymères et de copolymères — Détermination du pH,1980-11-01,2,['83.080'],ISO/TC 61/SC 9,9599,,[20182],"['en','fr']",1,

19432,IS,,ISO 11480:1997,"Pulp, paper and board — Determination of total chlorine and organically bound chlorine","Pâtes, papier et carton — Dosage du chlore total et du chlore lié aux matières organiques",1997-10-16,1,"['85.060','85.040']",ISO/TC 6,9599,,[69094],"['en','fr']",7,

19435,IS,,ISO 11483:1994,Preparation of plutonium sources and determination of 238Pu/239Pu isotope ratio by alpha spectrometry,Préparation des sources de plutonium et détermination du rapport isotopique 238Pu/239Pu par spectrométrie alpha,1994-08-18,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[37591],"['en','fr']",7,<p>Describes three simple and fast procedures to prepare plutonium sources and a procedure to measure the activity ratio by alpha particle spectrometry. Does not apply to purified plutonium solutions containing ^241Am nor to those containing more than 10 % of other nonvolatile impurities relative to the Pu content. The methods given are intended for use in conjunction or in parallel wit

19436,IS,,ISO 11484:1994,Steel tubes for pressure purposes — Qualification and certification of non-destructive testing (NDT) personnel,Tubes en acier pour service sous pression — Qualification et certification du personnel d'essais non destructifs (END),1994-06-23,1,"['03.100.30','77.040.20','23.040.10','77.140.75']",ISO/TC 17/SC 19,9599,,"[51259,38726,46288]","['en','fr']",15,"<p>Specifies the training, qualification and certification requirements for three levels of NDT personnel competence to execute specific tasks in the NDT of seamless and welded steel tubes, including the weld seam, and flat products used in the manufacture of welded tubes. Applies to the following NDT methods: eddy c

51259,IS,,ISO 11484:2009,Steel products — Employer's qualification system for non-destructive testing (NDT) personnel,"Produits en acier — Système de qualification, par l'employeur, du personnel pour essais non destructifs (END)",2009-02-12,2,"['03.100.30','77.040.20']",ISO/TC 17/SC 19,9599,[19436],"[67845,69804]",['en'],15,"<p>ISO 11484:2009 describes an employer's qualification system for non-destructive testing (NDT) personnel performing the inspection of the following steel products under the employer's responsibility: </p><ul><li>tubes/pipes (seamless or welded); </li><li>flat products, long products, rails, bars, sections, rod, wire.</li></ul>"

19437,IS,,ISO 11486:1993,Two-wheeled motorcycles — Fuel consumption measurements — Chassis dynamometer setting by coastdown method,Motocycles à deux roues — Mesurages de la consommation de carburant — Réglage du banc dynamométrique par la méthode de la décélération,1993-05-27,1,['43.140'],ISO/TC 22,9599,,[38683],"['en','fr']",12,"<p>Specifies a method of setting the chassis dynamometer with the vehicle running resistance for a bench test to measure fuel consumption of two-wheeled motorcycles as defined in ISO 3833. The measurement method for the motorcycle running speed on the road, and the method of setting and transforming the measured results on the dynamometer are also specified.</p>" 19

19440,IS,,ISO 11489:1995,Determination of platinum in platinum jewellery alloys — Gravimetric determination by reduction with mercury(I) chloride,Dosage du platine dans les alliages de platine pour la bijouterie-joaillerie — Dosage gravimétrique par réduction au chlorure de mercure(I),1995-04-27,1,['39.060'],ISO/TC 174,9599,,[57649],"['en','fr']",4,"<p>Specifies a gravimetric method for the determination of platinum in platinum jewellery alloys, preferably within the range of fineness stated in ISO 9202. The procedure applies specifically to platinum alloys incorporating palladium, iridium, rhodium, copper, cobalt, gold, ruthenium, gallium, chromium, indium and less than 5 % tungsten. Some m

19441,IS,,ISO 11490:1995,Determination of palladium in palladium jewellery alloys — Gravimetric determination with dimethylglyoxime,Dosage du palladium dans les alliages de palladium pour la bijouterie-joaillerie — Dosage gravimétrique par la diméthylglyoxime,1995-04-27,1,['39.060'],ISO/TC 174,9599,,[57650],"['en','fr']",4,"<p>Specifies a gravimetric method for the determination of palladium in palladium jewellery alloys, preferably within the range of fineness stated in ISO 9202. These alloys may contain silver, indium, gallium, copper, cobalt, nickel, tin and ruthenium. Coprecipitated elements have to be determined by a suitable method and a correction applied.</p>"

57650,IS,,ISO 11490:2015,Jewellery — Determination of palladium in palladium jewellery alloys — Gravimetric determination with dimethylglyoxime,"Joaillerie, bijouterie — Dosage du palladium dans les alliages de palladium pour la bijouterie-joaillerie — Dosage gravimétrique par la diméthylglyoxime",2015-01-20,2,['39.060'],ISO/TC 174,9599,[19441],[81400],"['en','fr']",6,"<p>ISO 11490:2015 specifies a gravimetric method for the determination of palladium in palladium jewellery alloys, preferably within the range of fineness stated in ISO 9202.</p><p>These alloys may contain silver, indium, gallium, copper, cobalt, nickel, tin, and ruthenium. Coprecipitated elements have to be determined by a su

37050,IS,,ISO 11494:2008,Jewellery — Determination of platinum in platinum jewellery alloys — Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standard element,"Joaillerie, bijouterie — Dosage du platine dans les alliages de platine pour la joaillerie, bijouterie — Méthode par spectrométrie d'émission à plasma induit en solution, utilisant l'yttrium comme étalon interne",2008-08-07,1,['39.060'],ISO/TC 174,9599,,[57651],"['en','fr']",6,"<p>ISO 11494:2008 describes a method for the determination of platinum in platinum jewellery alloys, preferably within the range of fineness specified in ISO 9202, by means of inductively coupled plasma (ICP) emission sp

57651,IS,,ISO 11494:2014,Jewellery — Determination of platinum in platinum jewellery alloys — ICP-OES method using yttrium as internal standard element,"Joaillerie, bijouterie — Dosage du platine dans les alliages de platine pour la joaillerie, bijouterie — Méthode par ICP-OES utilisant l'yttrium comme étalon interne",2014-11-19,2,['39.060'],ISO/TC 174,9599,[37050],[75285],"['en','fr']",8,"<p>ISO 11494:2014 describes a method for the determination of platinum in platinum jewellery alloys, preferably within the range of fineness specified in ISO 9202, by means of inductively coupled plasma optical emission spectrometry (ICP-OES).</p><p>This method applies to platinum jewellery alloys that mig

37051,IS,,ISO 11495:2008,Jewellery — Determination of palladium in palladium jewellery alloys — Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standard element,"Joaillerie, bijouterie — Dosage du palladium dans les alliages de palladium pour la joaillerie, bijouterie — Méthode par spectrométrie d'émission à plasma induit en solution, utilisant l'yttrium comme étalon interne",2008-08-07,1,['39.060'],ISO/TC 174,9599,,[57652],"['en','fr']",6,"<p>ISO 11495:2008 describes a method for the determination of palladium in palladium jewellery alloys, preferably within the range of fineness specified in ISO 9202, by means of inductively coupled plasma (ICP) emi

57652,IS,,ISO 11495:2014,Jewellery — Determination of palladium in palladium jewellery alloys — ICP-OES method using yttrium as internal standard element,"Joaillerie, bijouterie — Dosage du palladium dans les alliages de palladium pour la joaillerie, bijouterie — Méthode par ICP-OES utilisant l'yttrium comme étalon interne",2014-11-19,2,['39.060'],ISO/TC 174,9599,[37051],[75284],"['en','fr']",8,"<p>ISO 11495:2014 describes a method for the determination of palladium in palladium jewellery alloys, preferably within the range of fineness specified in ISO 9202, by means of inductively coupled plasma optical emission spectrometry (ICP-OES).</p><p>The preferred palladium content of the alloys lie

19447,IS,,ISO 11496:1993,Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar imperfections,Tubes en acier soudés et sans soudure pour service sous pression — Contrôle par ultrasons des extrémités de tube pour la détection des dédoublures de laminage,1993-11-11,1,"['77.040.20','23.040.10','77.140.75']",ISO/TC 17/SC 19,9599,,[44669],"['en','fr']",3,"<p>Specifies requirements for full peripheral ultrasonic testing. Is intended to detect, over a zone at the ends of plain end and bevelled end tubes, laminar imperfections which may interfere with subsequent fabrication operations (e.g. welding, ultrasonic inspection of welds, etc.).

19449,IS,,ISO 11498:1997,Dental handpieces — Dental low-voltage electrical motors,Pièces à main dentaires — Moteurs électriques dentaires à basse tension,1997-01-30,1,"['11.060.20','29.160.30']",ISO/TC 106/SC 4,9599,,[54805],"['en','fr']",12,"<p>Gives requirements and test methods for dental low-voltage electrical motors used in connection with dental handpieces. It also contains specifications on manufacturer's instructions, packaging and marking. Refers to IEC 601-1, the basic standard on safety of medical electrical equipment.</p>"

19450,IS,,ISO 11499:1997,Dental cartridges for local anaesthetics,Cartouches à usage dentaire pour anesthésiques locaux,1997-03-06,1,"['11.040.10','11.060.20']",ISO/TC 106/SC 4,9599,,[39504],"['en','fr']",7,

39504,IS,,ISO 11499:2007,Dentistry — Single-use cartridges for local anaesthetics,Art dentaire — Cartouches à usage unique pour anesthésiques locaux,2007-06-28,2,"['11.040.10','11.060.20']",ISO/TC 106/SC 4,9599,[19450],[61170],"['en','fr']",9,"<p>ISO 11499:2007 gives specific performance requirements for single-use dental cartridges of 1,8 ml and 2,2 ml nominal capacity, for use with local anaesthetics.</p><p>It specifies tests for leakage, plunger movement, extractable volume and underfilling, and lists general overall dimensions to ensure that the cartridge will fit dental cartridge syringes complying with ISO 9997.</p><p>Labelling requirements are also specified in ISO 11499:2007.</p>" 39

34681,IS,,ISO 115:2003,Unalloyed aluminium ingots for remelting — Classification and composition,Aluminium non allié en lingots pour refusion — Classification et composition,2003-11-06,1,['77.120.10'],ISO/TC 79/SC 4,9599,[3916],[85916],"['en','fr']",8,"<p>ISO 115:2003 defines the requirements for grades of unalloyed aluminium ingots intended for remelting. It specifies the classification and designation applicable to these grades, the conditions in which they are produced, their properties and the marks by which they are identified.</p>"

5694,IS,,ISO 1150:1978,Textile machinery and accessories — Closed-end drop wires for mechanical and electrical warp stop motions and automatic drawing-in machines,Matériel pour l'industrie textile — Lamelles fermées pour casse-chaînes mécaniques et électriques pour machines à rentrer automatiques,1978-08-01,1,['59.120.30'],ISO/TC 72/SC 3,9599,,[5695],"['en','fr']",5,

19451,IS,,ISO 11500:1997,Hydraulic fluid power — Determination of particulate contamination by automatic counting using the light extinction principle,Transmissions hydrauliques — Détermination de la pollution particulaire par comptage automatique à absorption de lumière,1997-08-28,1,['23.100.60'],ISO/TC 131/SC 6,9599,,"[31112,45552]","['en','fr']",9,

30358,IS,Cor,ISO 11500:1997/Cor 1:1998,Hydraulic fluid power — Determination of particulate contamination by automatic counting using the light extinction principle — Technical Corrigendum 1,Transmissions hydrauliques — Détermination de la pollution particulaire par comptage automatique à absorption de lumière — Rectificatif technique 1,1998-05-28,1,['23.100.01'],ISO/TC 131/SC 6,9599,,"[31112,45552]","['en','fr']",1,

45552,IS,,ISO 11500:2008,Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle,Transmissions hydrauliques — Détermination du niveau de pollution particulaire d'un échantillon liquide par comptage automatique des particules par absorption de lumière,2008-08-18,2,['23.100.60'],ISO/TC 131/SC 6,9599,"[19451,30358]",[77244],"['en','fr']",29,"<p>ISO 11500:2008 specifies an automatic particle-counting procedure for determining the number and sizes of particles present in hydraulic-fluid bottle samples of clear, homogeneous, single-phase liquids using an automatic particle counter (APC) that

19453,IS,,ISO 11502:1995,Plastics — Film and sheeting — Determination of blocking resistance,Plastiques — Film et feuille — Détermination du pouvoir bloquant,1995-09-21,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[70308],"['en','fr']",6,"<p>Describes a qualitative and a quantitative method for assessing the tendency of flexible plastics films and sheets to adhere to one another when left in contact for some time, at a specified temperature and under light pressure.</p>"

19454,IS,,ISO 11503:1995,Paints and varnishes — Determination of resistance to humidity (intermittent condensation),Peintures et vernis — Détermination de la résistance à l'humidité (par condensation intermittente),1995-07-13,1,['87.040'],ISO/TC 35/SC 9,9599,,[87281],"['en','fr']",7,"<p>Deals with the testing of paints, varnishes and related products. Specifies a test method for determining under standard conditions the resistance of a single coat or a multi-coat system of paint or related material in intermittent water condensation.</p>"

50562,IS,,ISO 11504:2012,Soil quality — Assessment of impact from soil contaminated with petroleum hydrocarbons,Qualité du sol — Évaluation de l'impact du sol contaminé avec des hydrocarbures pétroliers,2012-06-01,1,['13.080.01'],ISO/TC 190/SC 7,9599,,[64939],"['en','fr']",23,"<p>ISO 11504:2012 gives recommendations with regard to the choice of fractions and individual compounds when carrying out analysis for petroleum hydrocarbons in soils, soil materials and related materials, including sediments, for the purpose of assessing risks to human health, the environment and other possible receptors. Since many products based on petroleum hydrocarbons often contain substances that are not hydroca

50563,IS,,ISO 11505:2012,Surface chemical analysis — General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry,Analyse chimique des surfaces — Modes opératoires généraux pour le profilage en profondeur compositionnel quantitatif par spectrométrie d'émission optique à décharge luminescente,2012-12-12,1,['71.040.40'],ISO/TC 201/SC 8,9599,,[87870],['en'],33,"<p>ISO 11505:2013 describes a glow discharge optical emission spectrometric (GD-OES) method for the determination of the thickness, mass per unit area and chemical composition of surface layer films.</p><p>It is limited to a description of general procedures of quantification of GD-OES

50565,IS,,ISO 11506:2009,Document management applications — Archiving of electronic data — Computer output microform (COM) / Computer output laser disc (COLD),Applications de gestion de documents — Archivage de données électroniques — Microforme de sortie d'ordinateur (COM) / Disque laser de sortie d'ordinateur (COLD),2009-06-09,1,['37.080'],ISO/TC 171/SC 1,9599,,[68902],['en'],33,"<p>ISO 11506:2009 specifies techniques for archiving electronic data to ensure their long-term integrity, accessibility, usability, readability and reliability, in order to protect the evidential value of the data.</p><p>Long term is considered to be a period of time lasting more than a century (see ISO 5466).</p>

19458,IS,,ISO 11507:1997,Paints and varnishes — Exposure of coatings to artificial weathering — Exposure to fluorescent UV and water,Peintures et vernis — Exposition des revêtements au vieillissement artificiel — Exposition au rayonnement UV fluorescent et à l'eau,1997-05-15,1,['87.040'],ISO/TC 35/SC 9,9599,,[37489],"['en','fr']",9,

37489,IS,,ISO 11507:2007,Paints and varnishes — Exposure of coatings to artificial weathering — Exposure to fluorescent UV lamps and water,Peintures et vernis — Exposition des revêtements au vieillissement artificiel — Exposition au rayonnement de lampes à fluorescence UV et à l'eau,2007-01-24,2,['87.040'],ISO/TC 35/SC 9,9599,[19458],"[56831,56803]","['en','fr','ru']",10,<p>ISO 11507:2007 specifies exposure conditions for paint coatings exposed to artificial weathering in apparatus including fluorescent UV lamps and condensation or water spray. The effects of weathering are evaluated separately by comparative testing of chosen parameters.</p>

19459,IS,,ISO 11508:1998,Soil quality — Determination of particle density,Qualité du sol — Détermination de la masse volumique des particules,1998-03-05,1,['13.080.20'],ISO/TC 190,9599,,[68257],"['en','fr']",5,

19460,IS,,ISO 11509:1995,Road vehicles — Towed vehicles with compressed-air braking system and antilock braking system — Measurement of braking performance,Véhicules routiers — Véhicules tractés équipés de dispositifs de freinage à air comprimé comportant un dispositif antiblocage — Mesurage des performances de freinage,1995-04-20,1,['43.040.40'],ISO/TC 22,9599,,[27124],"['en','fr']",6,"<p>Specifies the test method to be adopted when testing the antilock braking systems of full trailers, semi-trailers and centre-axle trailers fitted with compressed-air braking systems, corresponding to vehicles of category 0 as defined in UN-ECE Regulation No. 13.</p>"

5698,IS,,ISO 1151-1:1985,"Flight dynamics — Concepts, quantities and symbols — Part 1: Aircraft motion relative to the air","Mécanique du vol — Concepts, grandeurs et symboles — Partie 1: Mouvement de l'avion par rapport à l'air",1985-10-24,3,"['01.060','49.020']",ISO/TC 20,9599,,[5699],"['en','fr']",,

5696,IS,,ISO 1151:1972,Withdrawal of ISO 1151-1975,Annulation de l'ISO 1151-1975,1972-12-01,1,"['01.060','49.020']",ISO/TC 20,9599,,[5699],"['en','fr']",19,

5702,IS,,ISO 1151-2:1974,Terms and symbols for flight dynamics — Part 2: Motions of the aircraft and the atmosphere relative to the Earth,Termes et symboles de la mécanique du vol — Partie 2: Mouvements de l'avion et de l'atmosphère par rapport à la Terre,1974-03-01,1,"['01.060','49.020']",ISO/TC 20,9599,,[5703],['en'],6,

5703,IS,,ISO 1151-2:1985,"Flight dynamics — Concepts, quantities and symbols — Part 2: Motions of the aircraft and the atmosphere relative to the Earth","Mécanique du vol — Concepts, grandeurs et symboles — Partie 2: Mouvements de l'avion et de l'atmosphère par rapport à la Terre",1985-09-05,2,"['01.060','49.020']",ISO/TC 20/SC 8,9599,"[5720,5702]","[30926,68995]","['en','fr']",5,"<p>Gives basic definitions and deals with motion of the aircraft and the atmosphere relative to the earth. The atmosphere is assumed to be at rest or in translational motion at constant velocity relative to the Earth. The aircraft is assumed to be rigid. However, most of the definitions can be applied to the case o

5704,IS,Add,ISO 1151-2:1985/Add 1:1987,"Flight dynamics — Concepts, quantities and symbols — Part 2: Motions of the aircraft and the atmosphere relative to the Earth — Addendum 1","Mécanique du vol — Concepts, grandeurs et symboles — Partie 2: Mouvements de l'avion et de l'atmosphère par rapport à la Terre — Additif 1",1987-08-27,2,"['01.060','49.020']",ISO/TC 20/SC 8,9599,,"[30926,68995]","['en','fr']",2,

5706,IS,,ISO 1151-3:1972,"Terms and symbols for flight dynamics — Part 3: Derivatives of forces, moments and their coefficients","Termes et symboles de la mécanique du vol — Partie 3: Dérivées des forces, des moments et de leurs coefficients",1972-12-01,1,"['01.060','49.020']",ISO/TC 20,9599,,[5707],"['en','fr']",10,

5708,IS,,ISO 1151-4:1974,"Terms and symbols for flight dynamics — Part 4: Concepts, quantities and symbols used in the study of aircraft stability and control","Termes et symboles de la mécanique du vol — Partie 4: Concepts, grandeurs et symboles utilisés dans l'étude de la stabilité et du pilotage des avions",1974-02-01,1,"['01.060','49.020']",ISO/TC 20,9599,[7743],[5709],"['en','fr']",4,

5710,IS,Add,ISO 1151-4:1974/Add 1:1986,"Terms and symbols for flight dynamics — Part 4: Concepts, quantities and symbols used in the study of aircraft stability and control — Addendum 1","Termes et symboles de la mécanique du vol — Partie 4: Concepts, grandeurs et symboles utilisés dans l'étude de la stabilité et du pilotage des avions — Additif 1",1986-10-31,1,"['01.060','49.020']",ISO/TC 20,9599,,[5709],['en'],2,

5711,IS,,ISO 1151-5:1974,Terms and symbols for flight dynamics — Part 5: Quantities used in measurements,Termes et symboles de la mécanique du vol — Partie 5: Grandeurs utilisées dans les mesures,1974-02-01,1,"['01.060','49.020']",ISO/TC 20,9599,,[5712],"['en','fr']",7,

5712,IS,,ISO 1151-5:1987,"Flight dynamics — Concepts, quantities and symbols — Part 5: Quantities used in measurements","Mécanique du vol — Concepts, grandeurs et symboles — Partie 5: Grandeurs utilisées dans les mesures",1987-04-30,2,"['01.060','49.020']",ISO/TC 20/SC 8,9599,"[7744,5711]",[68997],"['en','fr']",8,"<p>Includes the quantities used in flight measurements. Defines fundamental characteristics of the atmosphere, geometric and geopotential altitudes, equivalent altitudes related to a standard atmosphere, physical quantities related to motion of the aircraft in the atmosphere, measurement of quantities related to motion of the aircraft in the atmosphere, speeds and indicated Mach nu

5715,IS,,ISO 1151-7:1985,"Flight dynamics — Concepts, quantities and symbols — Part 7: Flight points and flight envelopes","Mécanique du vol — Concepts, grandeurs et symboles — Partie 7: Points de vol et domaines de vol",1985-08-08,1,"['01.060','49.020']",ISO/TC 20/SC 8,9599,,"[69000,84231]","['en','fr']",6,"<p>Is intended to give definitions specifying the terms: mission, controls, geometric configuration, situation of the systems, state of the aircraft, environment, flight points, effective flight points and flight envelopes, which are necessary for safety analyses, for qualification purposes.</p>"

5716,IS,,ISO 1151-8:1992,"Flight dynamics — Concepts, quantities and symbols — Part 8: Concepts and quantities used in the study of the dynamic behaviour of the aircraft","Mécanique du vol — Concepts, grandeurs et symboles — Partie 8: Concepts et grandeurs utilisés pour l'étude du comportement dynamique de l'avion",1992-06-11,1,"['01.060','49.020']",ISO/TC 20/SC 8,9599,,"[69001,81983]","['en','fr']",8,"<p>The aircraft is assumed to be rigid, of constant mass and of constant inertia. It is not equipped with systems modifying its natural dynamic behaviour. However, most of the definitions can be applied to the case of a flexible aircraft, of variable mass and of variable inertia. The general c

5717,IS,,ISO 1151-9:1993,"Flight dynamics — Concepts, quantities and symbols — Part 9: Models of atmospheric motions along the trajectory of the aircraft","Mécanique du vol — Concepts, grandeurs et symboles — Partie 9: Modèles de mouvements atmosphériques le long de la trajectoire de l'avion",1993-09-16,1,"['01.060','49.020']",ISO/TC 20/SC 8,9599,,[69002],"['en','fr']",5,"<p>Deals with the concepts and quantities characterizing models of the air motions affecting the dynamic behaviour of the aircraft. The motion of the air with respect to the Earth is defined by the wind velocity in each point of the aircraft trajectory. In flight dynamic problems, it is usual to use mathematical models of t