Withdrawn and superseded ISO standards — page 20 of 246

19311,IS,,ISO 11358:1997,Plastics — Thermogravimetry (TG) of polymers — General principles,Plastiques — Thermogravimétrie (TG) des polymères — Principes généraux,1997-04-10,1,['83.080.01'],ISO/TC 61/SC 5,9599,[13696],[59710],"['en','fr']",10,

30839,IS,,ISO 11358-2:2005,Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy,Plastiques — Thermogravimétrie (TG) des polymères — Partie 2: Détermination de l'énergie d'activation,2005-11-11,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[65086],"['en','fr']",6,<p>ISO 11358-2:2005 specifies a method for the determination of the activation energy in the Arrhenius equation for the decomposition of polymers using a thermogravimetric technique. The method is applicable only if the reaction proceeds by a single mechanism. It is applicable to multistage reactions if they consist of clearly separated single-stage steps.</p>

65086,IS,,ISO 11358-2:2014,Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy,Plastiques — Thermogravimétrie (TG) des polymères — Partie 2: Détermination de l'énergie d'activation,2014-06-13,2,['83.080.01'],ISO/TC 61/SC 5,9599,[30839],[80001],"['en','ru']",6,"<p>ISO 11358-2:2014 specifies a method for the determination of the activation energy, <i>E</i>_a, in the Arrhenius formula for the decomposition of polymers using a thermogravimetric technique. The method is applicable only if the reaction proceeds by a single mechanism. It is applicable to multistage reactions if they consist of clearly separated single-stage steps.</p>"

54366,IS,,ISO 11358-3:2013,Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics,Plastiques — Thermogravimétrie (TG) des polymères — Partie 3: Détermination de l'énergie d'activation à l'aide du graphique d'Ozawa-Friedman et analyse cinétique de la réaction,2013-12-11,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[80002],['en'],13,"<p>ISO 11358-3:2013 specifies an analysis method for determining the activation energy using the Ozawa-Friedman plot. It also specifies the preparation of master plots for verification of the reaction kinetics determined by thermogravimetry.</p><p>The Ozawa-Friedman

19312,IS,,ISO 11359-1:1999,Plastics — Thermomechanical analysis (TMA) — Part 1: General principles,Plastiques — Analyse thermomécanique (TMA) — Partie 1: Principes généraux,1999-09-30,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[59709],"['en','fr']",7,

59709,IS,,ISO 11359-1:2014,Plastics — Thermomechanical analysis (TMA) — Part 1: General principles,Plastiques — Analyse thermomécanique (TMA) — Partie 1: Principes généraux,2014-01-06,2,['83.080.01'],ISO/TC 61/SC 5,9599,[19312],[81834],['en'],5,"<p>ISO 11359-1:2014 specifies the general conditions for the thermomechanical analysis of thermoplastics and thermosetting materials, filled or unfilled, in the form of sheet or moulded parts.</p><p>Thermomechanical analysis consists of the determination of deformations of a test specimen under constant load as a function of temperature and/or time.</p>"

25175,IS,,ISO 11359-2:1999,Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature,Plastiques — Analyse thermomécanique (TMA) — Partie 2: Détermination du coefficient de dilatation thermique linéique et de la température de transition vitreuse,1999-10-07,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[81835],"['en','fr']",10,"<p>This part of ISO 11359 specifies a test method, using thermodilatometry, for the determination of the coefficient of</p><p>linear thermal expansion of plastics in a solid state by thermomechanical analysis (TMA). This part of ISO 11359</p><p>also specifies the determination of the glass tran

36587,IS,,ISO 11359-3:2002,Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature,Plastiques — Analyse thermomécanique (TMA) — Partie 3: Détermination de la température de pénétration,2002-10-24,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[74989],['en'],5,<p>This part of ISO 11359 specifies a method for the determination of the penetration temperature of thermoplastics using thermomechanical analysis.</p><p>NOTE This method can also be used to measure the softening temperature.</p>

74989,IS,,ISO 11359-3:2019,Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature,Plastiques — Analyse thermomécanique (TMA) — Partie 3: Détermination de la température de pénétration,2019-02-05,2,['83.080.01'],ISO/TC 61/SC 5,9599,[36587],[91096],['en'],5,<p>This document specifies a method for the determination of the penetration temperature of thermoplastics using thermomechanical analysis (TMA).</p><p>NOTE This method can also be used to measure the softening point.</p>

5674,IS,,ISO 1136:1976,Wool — Determination of mean diameter of fibres — Air permeability method,Laine — Détermination du diamètre moyen des fibres — Méthode perméamétrique,1976-11-01,1,['59.060.10'],ISO/TC 38/SC 23,9599,,[61689],"['en','fr']",8,<p>The air permeability test method is based on the Kozeny equation. Weighed fibres (test specimen) are introduced in a measuring chamber with known volume. Air is passed through this test specimen. A scale indicating variations in permeability of air may be calibrated in appropriate absolute units of rate of flow or pressure difference and a table or graph is provided for conversion of the observed reading into values of mean diameter of the measure

50448,IS,,ISO 11363-1:2010,Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications,Bouteilles à gaz — Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz — Partie 1: Spécifications,2010-05-06,1,['23.020.35'],ISO/TC 58/SC 2,9599,"[18904,19103]",[69931],"['en','fr']",9,"<p>ISO 11363-1:2010 specifies dimensions and tolerances for taper screw threads of nominal diameter 17,4 mm (designated 17E) and 25,8 mm (designated 25E) used for the connection of valves to gas cylinders.</p><p>It does not cover the connection requirements for:</p><ul><li>mechanical strength;</li><li>gas tightness;</li><li>capability of r

59418,IS,Cor,ISO 11363-1:2010/Cor 1:2011,Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications — Technical Corrigendum 1,Bouteilles à gaz — Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz — Partie 1: Spécifications — Rectificatif technique 1,2011-04-18,1,['23.020.35'],ISO/TC 58/SC 2,9599,,"[69931,60966]","['en','fr']",1,

60966,IS,Cor,ISO 11363-1:2010/Cor 2:2012,Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications — Technical Corrigendum 2,Bouteilles à gaz — Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz — Partie 1: Spécifications — Rectificatif technique 2,2012-01-16,1,['23.020.35'],ISO/TC 58/SC 2,9599,[59418],[69931],['en'],1,

50449,IS,,ISO 11363-2:2010,Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 2: Inspection gauges,Bouteilles à gaz — Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz — Partie 2: Calibres de contrôle,2010-05-06,1,['23.020.35'],ISO/TC 58/SC 2,9599,"[19191,19208]",[69932],"['en','fr']",18,"<p>ISO 11363-2:2010 specifies types, dimensions and principles of use of gauges, to be used in conjunction with the taper threads specified in ISO 11363-1 (i.e. 17E and 25E threads).</p><p>It provides examples of calculations for thread gauge dimensions on the large end diameter and draws attention to the limitations of the gaugi

68230,IS,,ISO 11365:2017,Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids,Pétrole et produits connexes — Exigences et recommandations pour la maintenance des fluides de régulation de turbines à base d'esters phosphates de triaryle,2017-09-08,1,['75.120'],ISO/TC 28/SC 4,9599,[54429],[87916],"['en','fr']",20,"<p>ISO 11365:2017 is applicable to the use of triaryl phosphate esters as fire-resistant fluids for turbine control and other hydraulic systems in power generation. These fluids fall under category HFDR of ISO 6743‑4^[1].</p><p>ISO 11365:2017 is intended to:</p><p>- assist the power equipment op

19317,IS,,ISO 11372:1995,Cylinders for dissolved acetylene — Inspection at time of filling,Bouteilles à acétylène dissous — Contrôle au moment du remplissage,1995-08-31,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[35968],"['en','fr']",9,<p>Specifies the minimum requirements for filling inspections of transportable cylinders for dissolved acetylene gas. These requirements reflect current practice and experience. Does not deal with manifolded bundles of cylinders or trailer cylinders.</p>

35968,IS,,ISO 11372:2005,Gas cylinders — Cylinders for dissolved acetylene — Inspection at time of filling,Bouteilles à gaz — Bouteilles à acétylène dissous — Contrôle au moment du remplissage,2005-09-20,2,['23.020.35'],ISO/TC 58/SC 4,9599,[19317],[52771],['en'],9,"<p>ISO 11372:2005 specifies minimum requirements that reflect current practice and experience for inspection at time of filling of single cylinders of water capacity up to 150 l for the storage and transport of dissolved acetylene gas under pressure.</p><p>ISO 11372:2005 is not applicable to palletized cylinders, or to manifolded cylinders or manifolded bundles on trailers.</p><p>ISO 11372:2005 does not cover aspects related to th

19320,IS,,ISO 11376:1997,Plastics — Epoxy resins and glycidyl esters — Determination of inorganic chlorine,Plastiques — Résines époxydes et esters glycidiques — Dosage du chlore inorganique,1997-05-15,1,['83.080.10'],ISO/TC 61/SC 12,9599,[10496],[34631],"['en','fr']",4,

25476,IS,,ISO 11378-2:2001,Textile floor coverings — Laboratory soiling tests — Part 2: Drum test,Revêtements de sol textiles — Essais d'encrassement en laboratoire — Partie 2: Essai au tambour,2001-05-10,1,['97.150'],ISO/TC 219,9599,,[86659],"['en','fr']",18,

61663,IS,Amd,ISO 11378-2:2001/Amd 1:2017,Textile floor coverings — Laboratory soiling tests — Part 2: Drum test — Amendment 1,Revêtements de sol textiles — Essais d'encrassement en laboratoire — Partie 2: Essai au tambour — Amendement 1,2017-06-30,1,['97.150'],ISO/TC 219,9599,,[86659],"['en','fr']",1,

19323,IS,,ISO 11379:1997,Textile floor coverings — Laboratory cleaning procedure using spray extraction,Revêtements de sol textiles — Méthode de nettoyage en laboratoire par injection-extraction,1997-12-25,1,['97.150'],ISO/TC 219,9599,,[44317],"['en','fr']",4,

5676,IS,,ISO 1138:1981,Rubber compounding ingredients — Carbon black — Determination of sulphur content,Ingrédients de mélange du caoutchouc — Noir de carbone — Dosage du soufre total,1981-12-01,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[44982],"['en','fr']",3,"<p>Lays down two methods for the determination of the total sulphur content in all types of carbon black for use in the rubber industry: Method A, using an oxygen bomb calorimeter; Method B, using a combustion furnace. The total sulphur content, expressed as a percentage by mass, is given by a formula.</p>"

44982,IS,,ISO 1138:2007,Rubber compounding ingredients — Carbon black — Determination of sulfur content,Ingrédients de mélange du caoutchouc — Noir de carbone — Dosage du soufre total,2007-02-06,2,['83.040.20'],ISO/TC 45/SC 3,9599,"[38926,5676]",[82861],"['en','fr']",5,"<p>ISO 1138:2007 specifies three methods for the determination of the total sulfur in all types of carbon black for use in the rubber industry:</p><p> Method A, using an oxygen bomb calorimeter;</p><p> Method B, using a combustion furnace;</p><p> Method C, using an automatic analyser.</p><p>With respect to safety aspects and test precision, it is preferable to use automatic systems. Classical chemical analysis (Method A and M

57937,IS,Amd,ISO 1138:2007/Amd 1:2012,Rubber compounding ingredients — Carbon black — Determination of sulfur content — Amendment 1: Clarification of digestion temperature in Subclause 3.4.5,Ingrédients de mélange du caoutchouc — Noir de carbone — Dosage du soufre total — Amendement 1: Clarification concernant la température de macération au Paragraphe 3.4.5,2012-04-20,2,['83.040.20'],ISO/TC 45/SC 3,9599,,[82861],"['en','fr']",1,

2440,IS,,ISO 11381:1994,Optics and optical instruments — Ophthalmic optics — Screw threads,Optique et instruments d'optique — Optique ophtalmique — Filetages,1994-12-22,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[70819],"['en','fr']",4,"<p>Specifies requirements for ISO metric screw threads for use with spectacle frames. Provision is made for screw threads of the following nominal sizes: S0,8 × 0,2, M1,0 × 0,25, M1,2 × 0,25, M1,4 × 0,3, M1,6 × 0,35 and M2,0 × 0,4, and for related taps and gauges (in accordance with ISO 529 and ISO 1502).</p>"

50525,IS,,ISO 11382:2010,"Optics and photonics — Optical materials and components — Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm","Optique et photonique — Matériaux et composants optiques — Caractérisation des matériaux optiques utilisés dans la bande spectrale infrarouge de 0,78 µm à 25 µm",2010-09-16,1,['37.020'],ISO/TC 172/SC 3,9599,,[83700],"['en','fr']",12,"<p>ISO 11382 provides guidelines for the description of data sheets for infrared materials. It specifies the nomenclature and the properties of infrared materials which are reported on such data sheets. These data sheets do not necessarily contain information on every property identi

5677,IS,,ISO 1139:1973,Textiles — Designation of yarns,Textiles — Désignation des fils,1973-09-01,1,['59.080.20'],ISO/TC 38/SC 23,9599,,[89212],"['en','fr']",5,"<p>Describes two methods of indicating the composition of yarns, whether single, folded, cabled or multiple wound. The notation comprises linear density indicated in the Tex System, number of filaments in filament yarns of all kinds except special kinds of yarns, e.g. fancy yarns, textured yarns, bulked yarns or yarns produced by wrapping a textile or non-textile material round a core.</p>"

19335,IS,,ISO 11393-1:1998,Protective clothing for users of hand-held chain-saws — Part 1: Test rig driven by a flywheel for testing resistance to cutting by a chain-saw,Vêtements de protection pour utilisateurs de scies à chaîne tenues à la main — Partie 1: Banc d'essai à volant d'inertie pour les essais de résistance à la coupure par une scie à chaîne,1998-10-15,1,['13.340.10'],ISO/TC 94/SC 13,9599,,"[70748,60563]","['en','fr']",12,

27273,IS,,ISO 11393-2:1999,Protective clothing for users of hand-held chain-saws — Part 2: Test methods and performance requirements for leg protectors,Vêtements de protection pour utilisateurs de scies à chaîne tenues à la main — Partie 2: Méthodes d'essai et exigences de performance pour protège-jambes,1999-10-07,1,['13.340.10'],ISO/TC 94/SC 13,9599,,"[70749,60558]","['en','fr']",15,

27274,IS,,ISO 11393-3:1999,Protective clothing for users of hand-held chain-saws — Part 3: Test methods for footwear,Vêtements de protection pour utilisateurs de scies à chaîne tenues à la main — Partie 3: Méthodes d'essai pour chaussures,1999-09-23,1,['13.340.50'],ISO/TC 94/SC 13,9599,,"[70750,60559]","['en','fr']",8,

27271,IS,,ISO 11393-4:2003,Protective clothing for users of hand-held chain-saws — Part 4: Test methods and performance requirements for protective gloves,Vêtements de protection pour utilisateurs de scies à chaîne tenues à la main — Partie 4: Méthodes d'essai et exigences pour les gants de protection,2003-08-29,1,['13.340.40'],ISO/TC 94/SC 13,9599,,"[60561,70751]","['en','fr']",22,"<p>ISO 11393-4:2003 specifies the requirements and test methods for gloves that are intended to provide protection against cuts by a hand-held chain-saw, including requirements for identification, marking and information for the user. </p><p>The method for measurement of protective coverage, the apparatus and the

27272,IS,,ISO 11393-5:2001,Protective clothing for users of hand-held chain-saws — Part 5: Test methods and performance requirements for protective gaiters,Vêtements de protection pour utilisateurs de scies à chaîne tenues à la main — Partie 5: Méthodes d'essai et exigences de performance pour guêtres de protection,2001-12-20,1,['13.340.10'],ISO/TC 94/SC 13,9599,,"[70752,61344]","['en','fr']",13,

39397,IS,,ISO 11393-6:2007,Protective clothing for users of hand-held chain-saws — Part 6: Test methods and performance requirements for upper body protectors,Vêtements de protection pour utilisateurs de scies à chaîne tenues à la main — Partie 6: Méthodes d'essai et exigences pour vestes de protection,2007-03-26,1,['13.340.10'],ISO/TC 94/SC 13,9599,,"[70753,60562]","['en','fr']",20,"<p>ISO 11393-6:2007 specifies requirements for the protection offered by upper body protectors against cutting by a hand-held chain-saw.</p><p>It also specifies the procedures for sampling and pre-treatment of upper body protectors, the measurement of the protective coverage, the apparatus and test methods for a

3915,IS,,ISO 114:1980,99.8 Unalloyed magnesium ingots — Chemical composition,"Lingots en magnésium non allié 99,8 — Composition chimique",1980-06-01,1,['77.120.20'],ISO/TC 79/SC 5,9599,,[15406],"['en','fr']",1,

5678,IS,,ISO 1140:1975,Ropes and cordage — Three-strand polyamide multifilament ropes,Cordages en multifilaments de polyamide à trois torons,1975-05-01,1,['59.080.50'],ISO/TC 38,9599,,[5679],['en'],2,

5679,IS,,ISO 1140:1990,Ropes — Polyamide — Specification,Cordages — Polyamide — Spécifications,1990-11-01,2,['59.080.50'],ISO/TC 38,9599,[5678],[36580],"['en','fr']",4,"<p>Specifies the main characteristics of 3-strand laid ropes and 8-strand plaited ropes and gives rules for their designation. Relates to the definitions given in ISO 1968. All main characteristics are given in tables. This second edition cancels and replaces the first edition ISO 1140:1975, of which it constitutes a technical revision.</p>"

36580,IS,,ISO 1140:2004,"Fibre ropes — Polyamide — 3-, 4- and 8-strand ropes","Cordages en fibres — Polyamide — Cordages à 3, 4 et 8 torons",2004-11-18,3,['59.080.50'],ISO/TC 38,9599,[5679],[56630],"['en','fr']",6,<p>ISO 1140:2004 specifies requirements for 3-strand hawser-laid and 4-strand shroud laid ropes and 8-strand braided ropes for general service made of polyamide and gives rules for their designation.</p>

56630,IS,,ISO 1140:2012,"Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes","Cordages en fibres — Polyamide — Cordages à 3, 4, 8 et 12 torons",2012-07-26,4,['59.080.50'],ISO/TC 38,9599,[36580],[76518],"['en','fr']",7,"<p>ISO 1140:2012 specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes, 8-strand braided ropes and 12-strand braided ropes for general service made of polyamide and gives rules for their designation.</p>"

19341,IS,,ISO 11400:1992,"Nickel, ferronickel and nickel alloys — Determination of phosphorus content — Phosphovanadomolybdate molecular absorption spectrometric method","Nickel, ferronickel et alliages de nickel — Dosage du phosphore — Méthode par spectrométrie d'absorption moléculaire au phosphovanadomolybdate",1992-09-03,1,"['77.100','77.120.40']",ISO/TC 155,9599,,[82717],"['en','fr']",5,"<p>Phosphorus content can be determined in the range of 0,000 5 % (m/m) to 0,05 % (m/m). As, Cr, Hf, Nb, Si, Ta, Ti, W interfere, but the interferences can be avoided. The principle is dissolution of a test portion in a mixture of nitric and hydrochloric acids, fuming with perchloric acid, removal of chr

19343,IS,,ISO 11402:1993,Plastics — Condensation resins — Determination of free formaldehyde,Plastiques — Résines de condensation — Détermination du formaldéhyde libre,1993-11-18,1,['83.080.10'],ISO/TC 61/SC 12,9599,,"[39058,29197]","['en','fr']",6,"<p>Specifies test methods (hydroxylammonium chloride, sulfite or KCN procedure) for condensation resins, including urea, furan, melamine and phenolic resins, as well as combinations and modifications of these resins. The free formaldehyde determined according to this standard establishes the actual condition at the time of test, the value has no quantitative relationship to free formaldehyde that may arise during or after processing. The purpose

19344,IS,,ISO 11403-1:1994,Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties,Plastiques — Acquisition et présentation de données multiples comparables — Partie 1: Propriétés mécaniques,1994-12-15,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[33316],"['en','fr']",11,"<p>Specifies test procedures for the acquisition and presentation of multipoint data on the following mechanical properties of plastics: dynamic modulus; tensile properties at constant test speed, ultimate stress and strain, tensile stress-strain curves; tensile creep; charpy impact strength. The test methods and test conditions apply predominantly to those plastics that can be injectio

33316,IS,,ISO 11403-1:2001,Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties,Plastiques — Acquisition et présentation de données multiples comparables — Partie 1: Propriétés mécaniques,2001-12-20,2,['83.080.01'],ISO/TC 61/SC 2,9599,[19344],[60783],"['en','fr']",13,

60783,IS,,ISO 11403-1:2014,Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties,Plastiques — Acquisition et présentation de données multiples comparables — Partie 1: Propriétés mécaniques,2014-06-06,3,['83.080.01'],ISO/TC 61/SC 2,9599,[33316],[81036],"['en','fr']",12,<p>ISO 11403-1:2014 specifies test procedures for the acquisition and presentation of multipoint data on the following mechanical properties of plastics:</p><ul><li>dynamic modulus;</li><li>tensile properties at constant test speed;</li><li>ultimate stress and strain;</li><li>tensile stress-strain curves;</li><li>tensile creep;</li><li>Charpy impact strength;</li><li>puncture impa

19345,IS,,ISO 11403-2:1995,Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties,Plastiques — Acquisition et présentation de données multiples comparables — Partie 2: Propriétés thermiques et caractéristiques relatives à la mise en oeuvre,1995-10-26,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[34805],"['en','fr']",6,"<p>Describes test procedures for the acquisition and presentation of comparable multipoint data on the following thermal and processing properties of plastics such as enthalpy/temperature curve, linear-expansion/temperature curve, melt shear viscosity.</p>"

34805,IS,,ISO 11403-2:2004,Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties,Plastiques — Acquisition et présentation de données multiples comparables — Partie 2: Propriétés thermiques et caractéristiques relatives à la mise en oeuvre,2004-03-08,2,['83.080.01'],ISO/TC 61/SC 2,9599,[19345],[61088],"['en','fr']",8,<p>ISO 11403-2:2004 specifies test procedures for the acquisition and presentation of multipoint data on the following thermal and processing properties of plastics:</p><ol><li>enthalpy/temperature curve;</li><li>linear-expansion/temperature curve;</li><li>melt shear viscosity.</li></ol>

61088,IS,,ISO 11403-2:2012,Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties,Plastiques — Acquisition et présentation de données multiples comparables — Partie 2: Propriétés thermiques et caractéristiques relatives à la mise en oeuvre,2012-09-03,3,['83.080.01'],ISO/TC 61/SC 2,9599,[34805],[75826],"['en','fr']",8,<p>ISO 11403-2:2012 specifies test procedures for the acquisition and presentation of multipoint data on the following thermal and processing properties of plastics:</p><ul><li>enthalpy/temperature curve;</li><li>linear-expansion/temperature curve;</li><li>melt shear viscosity.</li></ul>

20137,IS,,ISO 11403-3:1999,Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties,Plastiques — Acquisition et présentation de données multiples comparables — Partie 3: Effets induits par l'environnement sur les propriétés,1999-04-01,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[55462],"['en','fr']",14,

55462,IS,,ISO 11403-3:2014,Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties,Plastiques — Acquisition et présentation de données multiples comparables — Partie 3: Effets induits par l'environnement sur les propriétés,2014-06-12,2,['83.080.01'],ISO/TC 61/SC 2,9599,[20137],[81037],"['en','fr']",14,"<p>ISO 11403-3:2014 specifies test procedures for the acquisition and presentation of multipoint data which demonstrate the behaviour of plastics under the following environments:</p><ul><li> prolonged exposure to heat;</li><li> liquid chemicals;</li><li> environmental stress cracking under a constant tensile stress;</li><li> artif

19348,IS,,ISO 11406:1993,Commercial road vehicles — Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers — Interchangeability,Véhicules routiers utilitaires — Accouplement mécanique entre véhicules tracteurs à dispositif d'attelage arrière et remorques à train avant directeur — Interchangeabilité,1993-05-13,1,['43.040.70'],ISO/TC 22,9599,,[31117],"['en','fr']",5,

19349,IS,,ISO 11407:1993,"Commercial road vehicles — Mechanical coupling between towing vehicles with coupling mounted forward and below, and centre-axle trailers — Interchangeability",Véhicules routiers utilitaires — Accouplement mécanique entre véhicules tracteurs à dispositif d'attelage avancé et surbaissé et remorques à essieux centraux — Interchangeabilité,1993-11-04,1,['43.040.70'],ISO/TC 22,9599,,[31118],"['en','fr']",7,"<p>Lays down the requirements for the various elements and dimensions of a towing vehicle coupling mounted forward and below, and of a centre-axle trailer to ensure interchangeability. Applies to road trains for commercial transport of low-density, high-volume cargo o

5680,IS,,ISO 1141:1975,Ropes and cordage — Three-strand polyester multifilament ropes,Cordages en multifilaments de polyester à trois torons,1975-05-01,1,['59.080.50'],ISO/TC 38,9599,,[5681],"['en','fr']",2,

5681,IS,,ISO 1141:1990,Ropes — Polyester — Specification,Cordages — Polyester — Spécifications,1990-11-01,2,['59.080.50'],ISO/TC 38,9599,[5680],[36581],"['en','fr']",4,"<p>Specifies the main characteristics of 3-strand laid ropes and 8-strand plaited ropes and gives rules for their designation. Relates to the definitions given in ISO 1968. All main characteristics are given in tables. This second edition cancels and replaces the first edition ISO 1141:1975, of which it constitutes a technical revision.</p>"

36581,IS,,ISO 1141:2004,"Fibre ropes — Polyester — 3-, 4- and 8-strand ropes","Cordages en fibres — Polyester — Cordages à 3, 4 et 8 torons",2004-11-18,3,['59.080.50'],ISO/TC 38,9599,[5681],[56631],"['en','fr']",6,<p>ISO 1141:2004 specifies requirements for 3-strand hawser-laid and 4-strand shroud laid ropes and 8-strand braided ropes for general service made of polyester and gives rules for their designation.</p>

56631,IS,,ISO 1141:2012,"Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes","Cordages en fibres — Polyester — Cordages à 3, 4, 8 et 12 torons",2012-07-26,4,['59.080.50'],ISO/TC 38,9599,[36581],[76515],"['en','fr']",7,"<p>ISO 1141:2012 specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes, 8-strand braided ropes and 12-strand braided ropes for general service made of polyester and gives rules for their designation.</p>"

68458,IS,,ISO 11410:2019,Leather — Guidelines for packaging of wet blue leather,Cuir — Lignes directrices pour le conditionnement du cuir en bleu humide,2019-10-23,1,['59.140.30'],ISO/TC 120/SC 2,9599,,[80982],['en'],4,"<p>This document provides guidance and requirements for packing wet blue leather intended for transport and storage. This document is applicable to wet blue leather made out of goat skin, sheep skin, cow hide and buff hide.</p>"

19354,IS,,ISO 11413:1996,Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting,Tubes et raccords en matières plastiques — Préparation d'éprouvettes par assemblage tube/raccord électrosoudable en polyéthylène (PE),1996-09-12,1,['23.040.60'],ISO/TC 138/SC 5,9599,,"[37550,43863]","['en','fr']",9,<p>Specifies a method for the preparation of test pieces assembled from polyethylene pipes or spigot-ended fittings and electrofusion fittings.</p>

43863,IS,,ISO 11413:2008,Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting,Tubes et raccords en matières plastiques — Préparation d'éprouvettes par assemblage tube/raccord électrosoudable en polyéthylène (PE),2008-12-11,2,['23.040.60'],ISO/TC 138/SC 5,9599,[19354],[70031],"['en','fr']",10,"<p>ISO 11413:2008 specifies a method for the preparation of test pieces assembled from polyethylene (PE) pipes or spigot-ended fittings and electrofusion fittings (e.g. socket fittings such as couplers, or saddles).</p><p>The assembly criteria specified include parameters such as ambient temperature, fusion conditions, fitting a

19355,IS,,ISO 11414:1996,Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion,Tubes et raccords en matières plastiques — Préparation d'éprouvettes par assemblage tube/tube ou tube/raccord en polyéthylène (PE) par soudage bout à bout,1996-05-23,1,['23.040.60'],ISO/TC 138/SC 5,9599,,"[43864,37549]","['en','fr']",4,"<p>Describes a procedure for preparing butt-fusion-jointed test piece assemblies between polyethylene (PE) pipes and spigot-ended fittings. Specifies the assembly parameters such as ambient temperature, joint geometry and fusion parameters.</p>"

20468,IS,,ISO 11418-1:1996,Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing bottles,Récipients et accessoires pour préparations pharmaceutiques — Partie 1: Flacons compte-gouttes,1996-02-15,1,"['11.120.99','11.040.20']",ISO/TC 76,9599,,[38688],"['en','fr']",4,"<p>Specifies the design, dimensions, materials and requirements of drop-dispensing bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations which are not intended for parenteral use.</p>"

38688,IS,,ISO 11418-1:2005,Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles,Récipients et accessoires pour préparations pharmaceutiques — Partie 1: Flacons compte-gouttes en verre,2005-02-07,2,"['11.120.99','11.040.20']",ISO/TC 76,9599,[20468],[67702],['en'],4,"<p>ISO 11418-1:2005 specifies the design, dimensions, material and requirements of drop-dispensing glass bottles. Drop-dispensing glass bottles are applicable to primary packs used in direct contact with a drug.</p><p>ISO 11418-1:2005 is applicable to drop-dispensing glass bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of pharmaceuti

21789,IS,,ISO 11418-2:1996,Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck bottles for syrups,Récipients et accessoires pour préparations pharmaceutiques — Partie 2: Flacons bague à vis pour sirops,1996-02-15,1,"['11.120.99','11.040.20']",ISO/TC 76,9599,,[38689],"['en','fr']",4,"<p>Specifies the design, dimensions, materials and requirements of screw-neck bottles used for pharmaceutical preparations in liquid form (sirups). Together with the corresponding closure systems, they serve for packaging of pharmaceutical preparations which are not intended for parenteral use.</p>"

38689,IS,,ISO 11418-2:2005,Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups,Récipients et accessoires pour préparations pharmaceutiques — Partie 2: Flacons en verre à bouchon à vis pour sirops,2005-02-07,2,"['11.120.99','11.040.20']",ISO/TC 76,9599,[21789],[66273],['en'],4,"<p>ISO 11418-2:2005 specifies the design, dimensions, material and requirements of screw-neck glass bottles for pharmaceutical preparations in liquid form (syrups). Screw-neck glass bottles are applicable to primary packs used in direct contact with a drug.</p><p>ISO 11418-2:2005 is applicable to screw-neck glass bottles used in pharmacy. Together with the correspond

21790,IS,,ISO 11418-3:1996,Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck bottles (veral) for solid and liquid dosage forms,Récipients et accessoires pour préparations pharmaceutiques — Partie 3: Flacons bague à vis (veral) pour formes sèches et liquides,1996-02-15,1,"['11.120.99','11.040.20']",ISO/TC 76,9599,,[38690],"['en','fr']",4,"<p>Specifies the design, dimensions, materials and requirements of screw-neck bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of solid and liquid pharmaceutical preparations which are not intended for parenteral use.</p>"

38690,IS,,ISO 11418-3:2005,Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms,Récipients et accessoires pour préparations pharmaceutiques — Partie 3: Flacons en verre à bouchon à vis (veral) pour formes sèches et liquides,2005-02-07,2,"['11.120.99','11.040.20']",ISO/TC 76,9599,[21790],[66275],['en'],4,"<p>ISO 11418-3:2005 specifies the design, dimensions, material and requirements of screw-neck glass bottles (veral) for pharmaceutical preparations in solid and liquid dosage forms. Screw-neck glass bottles are applicable to primary packs used in direct contact with a drug.</p><p>ISO 11418-3:2005 is applicable

21791,IS,,ISO 11418-4:1996,Containers and accessories for pharmaceutical preparations — Part 4: Tablet bottles,Récipients et accessoires pour préparations pharmaceutiques — Partie 4: Piluliers,1996-02-15,1,"['11.120.99','11.040.20']",ISO/TC 76,9599,,[38691],"['en','fr']",4,"<p>Specifies the design, dimensions, materials and requirements of tablet bottles used in pharmacy. Together with the corresponding closure systems, they serve for packaging of tablets which are not intended for parenteral use.</p>"

21792,IS,,ISO 11418-5:1997,Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies,Récipients et accessoires pour préparations pharmaceutiques — Partie 5: Compte-gouttes,1997-12-25,1,"['11.120.99','11.040.20']",ISO/TC 76,9599,,[66669],"['en','fr']",9,

28580,IS,,ISO 11418-7:1998,Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms,Récipients et accessoires pour préparations pharmaceutiques — Partie 7: Flacons avec bague à vis en verre étiré pour diagnostics forme liquide,1998-09-24,1,"['11.120.99','11.040.20']",ISO/TC 76,9599,,[66688],"['en','fr']",5,

19359,IS,,ISO 11419:1997,Agricultural irrigation equipment — Float type air release valves,Matériel agricole d'irrigation — Vannes de purge d'air à flotteur,1997-11-06,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[41121],"['en','fr']",9,

5682,IS,,ISO 1142:1973,Ropes — Sampling and conditioning for testing,Cordages — Échantillonnage et conditionnement en vue des essais,1973-09-01,1,['59.080.50'],ISO/TC 38,9599,,[7137],"['en','fr']",1,

19360,IS,,ISO 11420:1996,"Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds","Méthode d'estimation de la dispersion du noir de carbone dans les tubes, les raccords et les compositions à base de polyoléfines",1996-11-14,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 5,9599,,[31177],"['en','fr']",8,"<p>Describes two procedures for the assessment of carbon black particle and agglomerate size and dispersion in polyolefin pipes, fittings and compounds with a carbon black content of less than 3 %. Also applicable for raw material in pellet form.</p>"

22463,IS,,ISO 11421:1997,Optics and optical instruments — Accuracy of optical transfer function (OTF) measurement,Optique et instruments d'optique — Exactitude du mesurage de la fonction de transfert optique (OTF),1997-09-11,1,['17.180.01'],ISO/TC 172/SC 1,9599,,[85988],"['en','fr']",30,

19364,IS,,ISO 11424:1996,Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification,Tuyaux et tubes en caoutchouc pour systèmes d'aération et à vide des moteurs à combustion interne — Spécifications,1996-11-07,1,"['27.020','83.140.40','83.140.30']",ISO/TC 45/SC 1,9599,,[68038],"['en','fr']",6,<p>Specifies requirements for vulcanized-rubber hoses and tubing for use in the various air and vacuum systems found on internal-combustion engines. Does not cover hoses used for direct power-brake actuation in trucks and trailers.</p>

68038,IS,,ISO 11424:2017,Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification,Tuyaux et tubes en caoutchouc pour systèmes d'aération et à vide des moteurs à combustion interne — Spécifications,2017-02-23,2,"['27.020','83.140.40','83.140.30']",ISO/TC 45/SC 1,9599,[19364],[86391],['en'],12,"<p>ISO 11424:2017 specifies requirements for rubber hoses and tubing for use in the various air and vacuum systems found on internal combustion engines. This document does not cover hoses used for direct power-brake actuation in trucks and trailers, nor for air intakes and ducting within the passenger compartment. The highest-temperature hoses are generally used

19365,IS,,ISO 11425:1996,Rubber hoses and hose assemblies for automobile power-steering systems — Specification,Tuyaux et flexibles en caoutchouc pour circuits de direction assistée — Spécifications,1996-04-18,1,"['83.140.40','43.040.50']",ISO/TC 45/SC 1,9599,,"[75647,55624]","['en','fr']",8,"<p>Specifies requirements for five types of hose and hose assembly used in automobile power-steering systems, the five types differing in their pressure ratings and volumetric expansion. They are for use with fluids in the temperature range -40 °C to +135 °C.</p>"

19366,IS,,ISO 11426:1993,Determination of gold in gold jewellery alloys — Cupellation method (fire assay),Dosage de l'or dans les alliages d'or pour la bijouterie-joaillerie — Méthode de coupellation (essai au feu),1993-05-06,1,['39.060'],ISO/TC 174,9599,,[26426],"['en','fr']",4,

26426,IS,,ISO 11426:1997,Determination of gold in gold jewellery alloys — Cupellation method (fire assay),Dosage de l'or dans les alliages d'or pour la bijouterie-joaillerie — Méthode de coupellation (essai au feu),1997-11-20,2,['39.060'],ISO/TC 174,9599,[19366],[57647],"['en','fr']",6,

57647,IS,,ISO 11426:2014,Jewellery — Determination of gold in gold jewellery alloys — Cupellation method (fire assay),"Joaillerie, bijouterie — Dosage de l'or dans les alliages d'or pour la bijouterie-joaillerie — Méthode de coupellation (essai au feu)",2014-11-26,3,['39.060'],ISO/TC 174,9599,[26426],[75771],"['en','fr']",7,"<p>ISO 11426:2014 specifies a cupellation method (fire assay) for the determination of gold in gold jewellery alloys. The gold content of the alloys should preferably lie between 333 and 999 parts per thousand (?).</p><p>The procedure is applicable specifically to gold alloys incorporating silver, copper, and zinc. Some modifications are indicated where nickel and/or pal

19367,IS,,ISO 11427:1993,Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide,Dosage de l'argent dans les alliages d'argent pour la bijouterie-joaillerie — Méthode volumétrique (potentiométrique) utilisant le bromure de potassium,1993-05-06,1,['39.060'],ISO/TC 174,9599,,[57648],"['en','fr']",3,"<p>The principle of the method specified is dissolving the sample in dilute nitric acid and determining the silver content of the resulting solution by titration with standard potassium bromide solution, using a potentiometric indication of the equivalence point. The alloys, preferably within the range of fineness stated in ISO 9202, may conta

24704,IS,Cor,ISO 11427:1993/Cor 1:1994,Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide — Technical Corrigendum 1,Dosage de l'argent dans les alliages d'argent pour la bijouterie-joaillerie — Méthode volumétrique (potentiométrique) utilisant le bromure de potassium — Rectificatif technique 1,1994-10-27,1,['39.060'],ISO/TC 174,9599,,[57648],"['en','fr']",1,"<p>Replaces 1 mol/l by 0,1 mol/l in subclause 4.2 on page 1.</p>"

57648,IS,,ISO 11427:2014,Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide,"Joaillerie, bijouterie — Dosage de l'argent dans les alliages d'argent pour la bijouterie-joaillerie — Méthode volumétrique (potentiométrique) utilisant le bromure de potassium",2014-10-29,2,['39.060'],ISO/TC 174,9599,"[19367,24704]",[81401],"['en','fr']",5,"<p>The method of ISO 11427:2014 describes a volumetric method for the determination of silver in jewellery alloys, preferably within the range of fineness stated in ISO 9202.</p><p>These alloys may contain copper, zinc, cadmium, and palladium. Apart from palladium, which must be precipitate

5683,IS,,ISO 1143:1975,Metals — Rotating bar bending fatigue testing,Métaux — Essais de fatigue par flexion rotative de barreaux,1975-11-01,1,['77.040.10'],ISO/TC 164,9599,,[41875],"['en','fr']",6,"<p>The tests are made to determine fatigue properties. They are carried out at room temperature, in air, the test piece being rotated. Test piece diameters are between 5 mm and 12,5 mm. The results may be affected by atmospheric conditions.</p>"

41875,IS,,ISO 1143:2010,Metallic materials — Rotating bar bending fatigue testing,Matériaux métalliques — Essais de fatigue par flexion rotative de barreaux,2010-10-21,2,['77.040.10'],ISO/TC 164/SC 4,9599,[5683],"[72653,79575]",['en'],26,"<p>ISO 1143:2010 specifies the method for rotating bar bending fatigue testing of metallic materials. The tests are conducted at room temperature or elevated temperature in air, the specimen being rotated.</p>"

19371,IS,,ISO 11431:1993,Building construction — Sealants — Determination of adhesion/cohesion properties after exposure to artificial light through glass,Construction immobilière — Mastics — Détermination des propriétés d'adhésivité/cohésion après exposition à la lumière artificielle à travers le verre,1993-04-22,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[27376],"['en','fr']",4,"<p>The sealants are also exposed to water or humidity, and to elevated temperature. The principle of the method specified is preparing test specimens and reference specimens in which the sealant to be tested adheres to two parallel contact surfaces, submitting the test specimens to the simultaneous influence of artificia

27376,IS,,ISO 11431:2002,"Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass","Construction immobilière — Produits pour joints — Détermination des propriétés d'adhésivité/cohésion des mastics après exposition à la chaleur, à l'eau et à la lumière artificielle à travers le verre",2002-09-19,2,['91.100.50'],ISO/TC 59/SC 8,9599,[19371],[88024],"['en','fr']",6,<p>ISO 11431:2002 specifies a method for the determination of the adhesion/cohesion properties of sealants after cyclic exposure to heat and artificial light followed by a period of exposure to water at a defined temperature.

19372,IS,,ISO 11432:1993,Building construction — Sealants — Determination of resistance to compression,Construction immobilière — Mastics — Détermination de la résistance à la compression,1993-04-22,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[35012],"['en','fr']",3,"<p>The principle of the method specified is preparing test specimens in which the sealant to be tested adheres to two parallel contact surfaces, compressing the test specimens to a defined value under defined conditions and recording the applied force and the resulting stress.</p>"

35012,IS,,ISO 11432:2005,Building construction — Sealants — Determination of resistance to compression,Construction immobilière — Mastics — Détermination de la résistance à la compression des mastics,2005-06-30,2,['91.100.50'],ISO/TC 59/SC 8,9599,[19372],[82037],"['en','fr']",5,<p>ISO 11432:2005 specifies a method for the determination of the resistance to compression of sealants used in joints in building construction.</p>

19373,IS,,ISO 11433:1993,Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption spectrometric method,Alliages de nickel — Dosage du titane — Méthode par spectrométrie d'absorption moléculaire au diantipyrylméthane,1993-08-26,1,['77.120.40'],ISO/TC 155,9599,,[80285],"['en','fr']",4,"<p>The principle of the method specified is dissolving a test portion in hydrochloric and nitric acids, removing hydrochloric acid and nitric acid by evaporation to fumes in the presence of sulfuric acid, forming the titanium diantipyrylmethane complex, measuring the absorbance of the test solution at a wavelength of 390 nm. The method may be used to determine titanium contents

57411,IS,Amd,ISO 11433:1993/Amd 1:2013,Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption spectrometric method — Amendment 1: Alternative procedure for the preparation of the titanium standard solution,Alliages de nickel — Dosage du titane — Méthode par spectrométrie d'absorption moléculaire au diantipyrylméthane — Amendement 1: Procédure alternative pour la préparation de la solution étalon de titane,2013-03-18,1,['77.120.40'],ISO/TC 155,9599,,[80285],['en'],1,

38163,IS,,ISO 11435:2005,Nickel alloys — Determination of molybdenum — Inductively coupled plasma atomic emission spectrometric method,Alliages de nickel — Dosage du molybdène — Méthode par spectrométrie d'émission atomique à plasma induit par haute fréquence,2005-11-10,1,['77.120.40'],ISO/TC 155,9599,,[57803],"['en','fr']",11,<p>ISO 11435:2005 specifies an inductively coupled plasma atomic emission spectrometric method for the determination of the mass fraction of molybdenum between 0.05 % and 20 % in nickel alloys.</p>

19377,IS,,ISO 11437-1:1994,Nickel alloys — Determination of trace-element content by electrothermal atomic absorption spectrometric method — Part 1: General requirements and sample dissolution,Alliages de nickel — Dosage des éléments-traces — Méthode par spectrométrie d'absorption atomique à excitation électrothermique — Partie 1: Caractéristiques générales et mise en solution de l'échantillon,1994-11-17,1,['77.120.40'],ISO/TC 155,9599,,[72983],"['en','fr']",10,"<p>Specifies electrothermal atomic absorption methods for the determination of trace elements in nickel alloys, in the concentration ranges given in clause 1 of other parts of ISO 11437. Gives in annex B typical compositions of some

20611,IS,,ISO 11437-2:1994,Nickel alloys — Determination of trace-element content by electrothermal atomic absorption spectrometric method — Part 2: Determination of lead content,Alliages de nickel — Dosage des éléments-traces — Méthode par spectrométrie d'absorption atomique à excitation électrothermique — Partie 2: Dosage du plomb,1994-11-17,1,['77.120.40'],ISO/TC 155,9599,,[72983],"['en','fr']",4,"<p>Specifies an electrothermal atomic absorption spectrometric method for the determination of lead in the range of 0,5 g/tonne to 10,0 g/tonne in nickel alloys. Gives the general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, cal

33298,IS,,ISO 11439:2000,Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles,Bouteilles à gaz — Bouteilles haute pression pour le stockage de gaz naturel utilisé comme carburant à bord des véhicules automobiles,2000-10-05,1,['43.060.40'],ISO/TC 58/SC 3,9599,,[44755],"['en','fr']",73,

5685,IS,,ISO 1144:1973,Textiles — Universal system for designating linear density (Tex System),Textiles — Système universel de désignation de la masse linéique (système Tex),1973-12-01,1,['59.080.01'],ISO/TC 38/SC 23,9599,"[3951,4181]",[70774],"['en','fr']",7,"<p>Gives the principles and recommended units of the Tex System for the expression of linear density and includes conversion tables for calculation the Tex values of numbers or counts in other systems together with a statement of the procedure for the implementation of the Tex System in trade and industry. The Tex System is applicable to all kinds of textile fibres, intermediate products (e.g. tops, slivers and rovings), yarns and simi

19382,IS,,ISO 11442-1:1993,Technical product documentation — Handling of computer-based technical information — Part 1: Security requirements,Documentation technique de produits — Gestion des informations techniques assistée par ordinateur — Partie 1: Exigences de sécurité,1993-09-02,1,"['35.240.10','01.110']",ISO/TC 10/SC 1,9599,,"[31042,39380]","['en','fr']",4,"<p>Computer security is divided into four areas: security with regard to installation and operation; system security; security with regard to document contents; security with regard to communication. The use of this standard is intended to facilitate communication with quality assurance functions within the company and outside, cons

19383,IS,,ISO 11442-2:1993,Technical product documentation — Handling of computer-based technical information — Part 2: Original documentation,Documentation technique de produits — Gestion des informations techniques assistée par ordinateur — Partie 2: Documentation originale,1993-09-02,1,"['35.240.10','01.110']",ISO/TC 10/SC 1,9599,,"[39380,31043]","['en','fr']",2,"<p>Provides original documents and related terms for use in computer-based product design processes; it also applies to manual design processes. Describes original document, original medium, original data, master print, signature document.</p>"

19384,IS,,ISO 11442-3:1993,Technical product documentation — Handling of computer-based technical information — Part 3: Phases in the product design process,Documentation technique de produits — Gestion des informations techniques assistée par ordinateur — Partie 3: Phases du processus de conception de produits,1993-09-02,1,"['35.240.10','01.110']",ISO/TC 10/SC 1,9599,,"[39380,31044]","['en','fr']",2,"<p>Provides guidelines for establishing new routines required for the production of design documentation. The routines apply to manual as well as computer-based design work, but are particularly important when computers are used. The following phases are characterized: development phase, approv

19385,IS,,ISO 11442-4:1993,Technical product documentation — Handling of computer-based technical information — Part 4: Document management and retrieval systems,Documentation technique de produits — Gestion des informations techniques assistée par ordinateur — Partie 4: Gestion de documents et systèmes de recherche documentaire,1993-09-02,1,"['35.240.10','01.110']",ISO/TC 10/SC 1,9599,,"[39380,31045]","['en','fr']",6,"<p>Gives the basic prerequisites (identification and classification criteria, retrieval) for the efficient handling of documents and activities in the different phases of design work (development phase, approval phase, distribution phase, storage phase, revision phase). Annex

28451,IS,,ISO 11442-5:1999,Technical product documentation — Handling of computer-based technical information — Part 5: Documentation in the conceptual design stage of the development phase,"Documentation technique de produits — Gestion des informations techniques assistée par ordinateur — Partie 5: Documentation au stade initial de la conception, dans la phase de développement",1999-12-09,1,"['35.240.10','01.110']",ISO/TC 10/SC 1,9599,,[39380],"['en','fr']",3,

19386,IS,,ISO 11443:1995,Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers,Plastiques — Détermination de la fluidité au moyen de rhéomètres équipés d'une filière capillaire ou plate,1995-02-02,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[35559],"['en','fr']",21,"<p>Specifies methods for testing plastic melts subjected to shear stresses at rates and temperatures approximately to those arising in plastic processing. Testing plastic melts in accordance with these methods is necessary since their fluidity is generally not dependent solely on temperature, but also on other parameters, e.g. shear rate and shear stress. Methods for assessing extrudate swelling ha

35559,IS,,ISO 11443:2005,Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers,Plastiques — Détermination de la fluidité au moyen de rhéomètres équipés d'une filière capillaire ou plate,2005-03-02,2,['83.080.01'],ISO/TC 61/SC 5,9599,[19386],[65101],"['en','fr']",34,"<p>ISO 11443:2005 specifies methods for determining the fluidity of plastics melts subjected to shear stresses at rates and temperatures approximating to those arising in plastics processing. Testing plastics melts in accordance with these methods is necessary since the fluidity of plastics melts is generally not dependent solely on temperature, but also on other parameters, in particular sh