Withdrawn and superseded ISO standards — page 184 of 246

17045,IS,,ISO 9361-1:1991,Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole,Plaquettes amovibles pour outils coupants — Plaquettes en céramique avec arrondi de pointe — Partie 1: Dimensions des plaquettes sans trou de fixation,1991-05-09,1,['25.100.01'],ISO/TC 29/SC 9,9599,,[65232],"['en','fr']",12,"<p>Specifies the dimensions of triangular, square, rhombic and round ceramic inserts of the following types: TN, TP, SN, SP, CN, DN, RN. Annexes A and B form an integral part of this standard. Annex C is for information only.</p>"

17046,IS,,ISO 9361-2:1991,Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole,Plaquettes amovibles pour outils coupants — Plaquettes en céramique avec arrondi de pointe — Partie 2: Dimensions des plaquettes avec trou de fixation cylindrique,1991-05-09,1,['25.100.01'],ISO/TC 29/SC 9,9599,,[53793],"['en','fr']",12,"<p>Specifies the dimensions of triangular, square, rhombic and round ceramic inserts of the following types: TN, SN, CN, DN, RN. Annexes A, B and C form an integral part of this standard. Annex D is for information only.</p>"

17047,IS,,ISO 9362:1987,Banking — Banking telecommunication messages — Bank identifier codes,Banque — Messages bancaires télétransmis — Code d'identification des banques,1987-10-22,1,['03.060'],ISO/TC 68/SC 2,9599,,[22738],"['en','fr']",4,

22738,IS,,ISO 9362:1994,Banking — Banking telecommunication messages — Bank identifier codes,Banque — Messages bancaires télétransmis — Code d'identification des banques,1994-12-22,2,['03.060'],ISO/TC 68,9599,[17047],[52017],"['en','fr']",4,"<p>Specifies the elements and structure of a universal bank identifier code (BIC) for use in automated processing in banking and related financial environments. The BIC consists of 8 or 11 contiguous characters (letters and/or digits without special characters such as blanks, separators, punctuation, etc.) and comprises the first three or all four of the following four components: bank code, country code, location code, branch code.</p>"

52017,IS,,ISO 9362:2009,Banking — Banking telecommunication messages — Business identifier code (BIC),Banque — Messages bancaires télétransmis — Code d'identification des entreprises (BIC),2009-10-09,3,['03.060'],ISO/TC 68,9599,[22738],[60390],['en'],6,"<p>ISO 9362:2009 specifies the elements and structure of a universal identifier code, the business identifier code (BIC), for financial and non-financial institutions and related entities, for which such an international identifier is required to facilitate automated processing of telecommunication messages in banking and related financial transaction environments.</p>"

60390,IS,,ISO 9362:2014,Banking — Banking telecommunication messages — Business identifier code (BIC),Banque — Messages bancaires télétransmis — Code d'identification des entreprises (BIC),2014-11-27,4,['03.060'],ISO/TC 68/SC 8,9599,[52017],[84108],['en'],6,"<p>ISO 9362:2014 specifies the elements and structure of a universal identifier code, the business identifier code (BIC), for financial and non-financial institutions, for which such an international identifier is required to facilitate automated processing of information for financial services.</p><p>The BIC is used for addressing messages, routing business transactions and identifying business parties.</p><p>This International Standard

17048,IS,,ISO 9363-1:1994,Optics and optical instruments — Contact lenses — Determination of cytotoxicity of contact lens material — Part 1: Agar overlay test and growth inhibition test,Optique et instruments d'optique — Lentilles de contact — Détermination de la cytotoxicité des matériaux des lentilles de contact — Partie 1: Essai de diffusion à travers l'agar et essai d'inhibition de la croissance cellulaire,1994-11-10,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[27464],"['en','fr']",7,<p>Specifies two in vitro methods for determining the cytotoxicity of contact lens materials: the agar overlay test and the growth inhibition test. Primary purpose of these tests is to reveal the presence of leach

17049,IS,,ISO 9364:1991,"Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, lock-forming and structural qualities","Tôles en acier revêtues en continu par immersion à chaud d'une couche d'alliage zinc-aluminium de qualité commerciale, pour pliage et agrafage ou destinées à la construction",1991-07-11,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[27962],"['en','fr']",12,

27962,IS,,ISO 9364:2001,"Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities","Tôles en acier revêtues en continu par immersion à chaud d'une couche d'alliage aluminium-zinc de qualité commerciale, pour emboutissage ou destinées à la construction",2001-11-29,2,['77.140.50'],ISO/TC 17/SC 12,9599,[17049],[37775],"['en','fr']",21,

37775,IS,,ISO 9364:2006,"Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities","Tôles en acier revêtues en continu par immersion à chaud d'une couche d'alliage aluminium-zinc de qualité commerciale, pour emboutissage ou destinées à la construction",2006-09-20,3,['77.140.50'],ISO/TC 17/SC 12,9599,[27962],[55863],['en'],16,"<p>ISO 9364:2006 applies to the characteristics of steel sheet of commercial, drawing and structural qualities coated by a continuous hot-dip aluminium/zinc alloy coating process. The aluminium/zinc alloy composition by mass is nominally 55 % aluminium, 1,6 % silicon, and the balance zinc. The product is intended for applicati

55863,IS,,ISO 9364:2011,"Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities","Tôles en acier revêtues en continu par immersion à chaud d'une couche d'alliage aluminium-zinc 55 % de qualité commerciale, pour emboutissage ou destinées à la construction",2011-11-23,4,['77.140.50'],ISO/TC 17/SC 12,9599,[37775],[70237],['en'],15,

17051,IS,,ISO 9366:1990,Composition cork floor tiles — Determination and control of squareness and straightness of edges,Dalles d'aggloméré composé de liège pour revêtements des sols — Détermination des dimensions et contrôle de l'équerrage et de la rectitude des bords,1990-07-19,1,"['79.100','91.100.60']",ISO/TC 87,9599,,[28119],"['en','fr']",5,

25518,IS,,ISO 9369:1997,Plastics — Basic materials for polyurethanes — Pure isocyanates — Analysis of isocyanate groups,Plastiques — Matières de base pour polyuréthannes — Isocyanates purs — Analyse des groupes isocyanates,1997-04-10,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[25884],"['en','fr']",5,

5356,IS,,ISO 937:1978,Meat and meat products — Determination of nitrogen content (Reference method),Viandes et produits à base de viande — Détermination de la teneur en azote (Méthode de référence),1978-12-01,1,['67.120.10'],ISO/TC 34/SC 6,9599,,[82663],"['en','fr']",3,"<p>The method consists in digesting of a test portion with concentrated sulphuric acid, using copper(II) sulphate as a catalyst, to convert organic nitrogen to ammonia ions. Then alkalisation, distillation of the liberated ammonia into an excess of boric acid solution, titration with hydrochloric acid to determine the ammonia bound by the boric acid, and calculation of nitrogen content of the sample from the amount of ammonia

17057,IS,,ISO 9370:1997,Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method,Plastiques — Détermination au moyen d'instruments de l'exposition énergétique lors d'essais d'exposition aux intempéries — Guide général et méthode d'essai fondamentale,1997-10-02,1,['83.080.01'],ISO/TC 61/SC 6,9599,,[41858],"['en','fr']",12,

41858,IS,,ISO 9370:2009,Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method,Plastiques — Détermination au moyen d'instruments de l'exposition énergétique lors d'essais d'exposition aux intempéries — Lignes directrices générales et méthode d'essai fondamentale,2009-06-26,2,['83.080.01'],ISO/TC 61/SC 6,9599,[17057],[67569],"['en','fr','ru']",15,"<p>ISO 9370:2009 specifies methods for the instrumental measurement of irradiance on a planar surface. This includes not only natural solar radiation but also intensified natural solar radiation and radiation produced by laboratory light sources.</p><p>For measurement of solar radiation

17058,IS,,ISO 9371:1990,Plastics — Phenolic resins in the liquid state or in solution — Determination of viscosity,Plastiques — Résines phénoliques liquides ou en solution — Détermination de la viscosité,1990-12-13,1,['83.080.10'],ISO/TC 61/SC 12,9599,,"[26824,8426,20843]","['en','fr']",10,

17061,IS,,ISO 9374-1:1989,Cranes — Information to be provided — Part 1: General,Appareils de levage à charge suspendue — Informations à fournir — Partie 1: Généralités,1989-11-09,1,['53.020.20'],ISO/TC 96/SC 8,9599,,[84842],"['en','fr']",1,<p>Specifies generally the information to be provided by the purchaser and the manufacturer so that the most suitable crane can be supplied for the duty requirements and service conditions. Refers to ISO 4301-1 und ISO 7363.</p>

34675,IS,,ISO 9374-3:2002,"Cranes — Information to be provided for enquiries, orders, offers and supply — Part 3: Tower cranes","Appareils de levage à charge suspendue — Informations à fournir pour la recherche, la commande, la soumission et la fourniture — Partie 3: Grues à tour",2002-08-22,1,['53.020.20'],ISO/TC 96/SC 7,9599,,[60273],"['en','fr']",15,"<p>ISO 9374-3:2002 specifies information to be provided</p><ol><li>by the purchaser when enquiring for a tower crane,</li><li>by the purchaser when ordering a tower crane,</li><li>by a manufacturer when offering (tendering) for a tower crane,</li><li>by the manufacturer when supplying a tower crane.</li></ol>"

17064,IS,,ISO 9374-4:1989,Cranes — Information to be provided — Part 4: Jib cranes,Appareils de levage à charge suspendue — Informations à fournir — Partie 4: Grues à flèche,1989-10-12,1,['53.020.20'],ISO/TC 96/SC 8,9599,,[84841],"['en','fr']",5,<p>Specifies information to be provided by a purchaser in enquiring for or ordering a jib crane and by a manufacturer in tendering for or supplying this crane. Annex A gives a format for information to be provided by the purchaser.</p>

17065,IS,,ISO 9374-5:1991,Cranes — Information to be provided — Part 5: Overhead travelling cranes and portal bridge cranes,Appareils de levage à charge suspendue — Informations à fournir — Partie 5: Ponts roulants et ponts portiques,1991-08-08,1,['53.020.20'],ISO/TC 96/SC 9,9599,,[76875],"['en','fr']",8,"<p>Specifies information to be provided by: a purchaser in enquiring about or ordering a crane, a manufacturer in tendering for or supplying a crane. Annex A forms an integral part of this standard.</p>"

17071,IS,,ISO 9379:1989,Doorsets — Repeated opening and closing test,Blocs-portes — Essai de fonctionnement répété,1989-12-07,1,['91.060.50'],ISO/TC 162,9599,,[42861],"['en','fr']",3,

17073,IS,,ISO 9381:1989,Doorsets — Static torsion test,Blocs-portes — Essai de torsion statique,1989-09-28,1,['91.060.50'],ISO/TC 162,9599,,[42862],"['en','fr']",2,

17075,IS,,ISO 9383:1995,Products in fibre-reinforced cement — Short corrugated or asymmetrical section sheets and fittings for roofing,Produits en ciment renforcé par des fibres — Plaques ondulées ou nervurées courtes et leurs accessoires pour couvertures,1995-02-16,1,['91.100.40'],ISO/TC 77,9599,,"[45828,46368]","['en','fr']",23,"<p>Specifies the technical characteristics of fibre-cement profiled sheets, described as short sheets, the length of which is normally less than or equal to 0,7 m and the corrugation height of which is between 15 mm and 110 mm and also of fibre-cement fittings, used as roofing materials. Specifies tests to check them, conditions of acceptance and marking. Does not

37632,IS,Amd,ISO 9383:1995/Amd 1:2004,Products in fibre-reinforced cement — Short corrugated or asymmetrical section sheets and fittings for roofing — Amendment 1,Produits en ciment renforcé par des fibres — Plaques ondulées ou nervurées courtes et leurs accessoires pour couvertures — Amendement 1,2004-09-21,1,['91.100.40'],ISO/TC 77,9599,,"[45828,46368]","['en','fr']",9,

42284,IS,Cor,ISO 9383:1995/Cor 1:2005,Products in fibre-reinforced cement — Short corrugated or asymmetrical section sheets and fittings for roofing — Technical Corrigendum 1,Produits en ciment renforcé par des fibres — Plaques ondulées ou nervurées courtes et leurs accessoires pour couvertures — Rectificatif technique 1,2005-06-10,1,['91.100.40'],ISO/TC 77,9599,,"[45828,46368]","['en','fr']",1,

17076,IS,,ISO 9384:1991,Fibre-cement siding shingles,Bardeaux en fibres-ciment,1991-06-20,1,['91.100.40'],ISO/TC 77,9599,,"[45792,45793,46368]","['en','fr']",9,

37633,IS,Amd,ISO 9384:1991/Amd 1:2004,Fibre-cement siding shingles — Amendment 1,Bardeaux en fibres-ciment — Amendement 1,2004-09-13,1,['91.100.40'],ISO/TC 77,9599,,"[45792,45793,46368]","['en','fr']",7,

42286,IS,Cor,ISO 9384:1991/Cor 1:2005,Fibre-cement siding shingles — Technical Corrigendum 1,Bardeaux en fibres-ciment — Rectificatif technique 1,2005-06-02,1,['91.100.40'],ISO/TC 77,9599,,"[45792,45793,46368]","['en','fr']",1,

5358,IS,,ISO 939:1980,Spices and condiments — Determination of moisture content — Entrainment method,Épices — Détermination de la teneur en eau — Méthode par entraînement,1980-05-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[71710],"['en','fr']",4,"<p>Specifies a method consisting in determining the amount of water entrained by azeotropic distillatiom, using an organic liquid immiscible with water, and collected in a graduated tube. Lists the apparatus to be used and describes sampling, procedure, expression of results and the details to be included in the test report. An example of an entrainment distillation apparatus is given in an annex.</p>"

17083,IS,,ISO 9391:1993,"Water quality — Sampling in deep waters for macro-invertebrates — Guidance on the use of colonization, qualitative and quantitative samplers","Qualité de l'eau — Échantillonnage de macro-invertébrés en eaux profondes — Guide d'utilisation des échantillonneurs de colonisation, qualitatifs et quantitatifs",1993-10-21,1,"['13.060.10','13.060.45']",ISO/TC 147/SC 5,9599,,[46251],"['en','fr']",13,"<p>The colonization samplers described allow water quality to be assessed by providing a collection of macro-invertebrates indicative of the water quality at the sites of concern. They do not sample the natural invertebrate fauna, which may be restricted by physical conditions un

17085,IS,,ISO 9393-1:1994,Thermoplastics valves — Pressure test methods and requirements — Part 1: General,Robinets en matériaux thermoplastiques — Méthodes d'essai de pression hydrostatique et exigences — Partie 1: Généralités,1994-05-05,1,"['23.060.01','83.140.30']",ISO/TC 138/SC 7,9599,,[35137],"['en','fr']",4,<p>Specifies the test methods and requirements for the resistance to internal pressure and leaktightness. Applies to thermoplastic valves intended for the transport of fluids. The requirements given in parts 1 and 2 are applicable to valves intended for use with cold water. Reference should be made to the relevant product standards for requirements or test methods applicable to valv

17086,IS,,ISO 9393-2:1997,"Thermoplastics valves — Pressure test methods and requirements — Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves","Robinets en matériaux thermoplastiques — Méthodes d'essai de pression hydrostatique et exigences — Partie 2: Conditions d'essai et exigences de base pour les robinets en PE, PP, PVC-U et PVDF",1997-04-10,1,"['23.060.01','83.140.30']",ISO/TC 138/SC 7,9599,,[38446],"['en','fr']",4,

29760,IS,Cor,ISO 9393-2:1997/Cor 1:1997,"Thermoplastics valves — Pressure test methods and requirements — Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves — Technical Corrigendum 1","Robinets en matériaux thermoplastiques — Méthodes d'essai de pression hydrostatique et exigences — Partie 2: Conditions d'essai et exigences de base pour les robinets en PE, PP, PVC-U et PVDF — Rectificatif technique 1",1997-12-04,1,"['23.060.01','83.140.30']",ISO/TC 138/SC 7,9599,,[38446],"['en','fr']",1,

17087,IS,,ISO 9394:1994,Optics and optical instruments — Determination of biological compatibility of contact lens material — Testing of the contact lens system by ocular study with rabbit eyes,Optique et instruments d'optique — Détermination de la compatibilité biologique des matériaux des lentilles de contact — Essai du système des lentilles de contact par évaluation de la tolérance oculaire chez le lapin,1994-11-17,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[27463],"['en','fr']",9,

27463,IS,,ISO 9394:1998,Ophthalmic optics — Contact lenses and contact lens care products — Determination of biocompatibility by ocular study using rabbit eyes,Optique ophtalmique — Lentilles de contact et produits d'entretien pour lentilles de contact — Détermination de la biocompatibilité par évaluation de la tolérance oculaire chez le lapin,1998-08-13,2,['11.040.70'],ISO/TC 172/SC 7,9599,[17087],[57318],"['en','fr']",11,

17089,IS,,ISO 9396:1989,Plastics — Phenolic resins — Determination of the gel time at a given temperature using automatic apparatus,Plastiques — Résines phénoliques — Détermination de la durée de gélification à une température donnée sur appareils automatiques,1989-12-14,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[25105],"['en','fr']",4,

17090,IS,,ISO 9397:1989,Plastics — Phenolic resins — Determination of free formaldehyde content,Plastiques — Résines phénoliques — Dosage du formaldéhyde libre,1989-03-09,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[25123],"['en','fr']",2,

25123,IS,,ISO 9397:1995,Plastics — Phenolic resins — Determination of free-formaldehyde content — Hydroxylamine hydrochloride method,Plastiques — Résines phénoliques — Dosage du formaldéhyde libre — Méthode au chlorhydrate d'hydroxylamine,1995-04-20,2,['83.080.10'],ISO/TC 61/SC 12,9599,[17090],"[39058,29197]","['en','fr']",3,"<p>Cancels and replaces the first edition (1989). Lays down a method of chemically determining free formaldehyde in phenolic resins by potentiometric titration, in aqueous or organic solution. The method is applicable to resins with free-formaldehyde contents up to and including 15 % (m/m). For free-formaldehyde contents between 15 % (m/m) and 30 % (m/m), it may be nece

17092,IS,,ISO 9398-1:1993,Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 1: Flatwork ironing machines,Spécifications pour les machines de blanchisserie industrielles — Définitions et contrôle des caractéristiques de capacité et de consommations — Partie 1: Sécheuses-repasseuses,1993-02-04,1,['97.060'],ISO/TC 72,9599,,[31157],"['en','fr']",5,"<p>Defines the characteristics and gives the usual test methods for these characteristics with regard to the capacity, the power and water consumptions, and the hourly productivity. Does not cover safety requirements. Is used for reference in the drafting of purchasing orders fo

17094,IS,,ISO 9398-2:1993,Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 2: Batch drying tumblers,Spécifications pour les machines de blanchisserie industrielles — Définitions et contrôle des caractéristiques de capacité et de consommations — Partie 2: Séchoirs rotatifs,1993-02-04,1,['97.060'],ISO/TC 72,9599,,[31158],"['en','fr']",4,"<p>Defines the characteristics and gives the usual test methods for these characteristics with regard to the capacity, the power and water consumptions, and the hourly productivity. Does not cover safety requirements. Is used for reference in the drafting of purchasing orders for batch

17095,IS,,ISO 9398-3:1993,Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 3: Washing tunnels,Spécifications pour les machines de blanchisserie industrielles — Définitions et contrôle des caractéristiques de capacité et de consommations — Partie 3: Tunnels de lavage,1993-02-04,1,['97.060'],ISO/TC 72,9599,,[31159],"['en','fr']",4,<p>Defines the characteristics and gives the usual test methods for power and water consumption and the hourly productivity. Does not cover safety requirements. Is used for reference in the drafting of purchasing orders for washing tunnels.</p>

17096,IS,,ISO 9398-4:1993,Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 4: Washer-extractors,Spécifications pour les machines de blanchisserie industrielles — Définitions et contrôle des caractéristiques de capacité et de consommations — Partie 4: Laveuses-essoreuses,1993-02-04,1,['97.060'],ISO/TC 72,9599,,[31160],"['en','fr']",6,"<p>Defines the characteristics and gives the usual test methods for these characteristics with regard to the capacity, the power and water consumptions, and the hourly productivity. Does not cover safety requirements. Is used for reference in the drafting of purchasing orders for washer-e

17099,IS,,ISO 9401:1991,Machine tools — Jaw mountings on power chucks,Machines-outils — Dentelures pour mors de mandrins,1991-07-11,1,['25.060.20'],ISO/TC 39/SC 8,9599,,"[32137,39614,39613,40246]","['en','fr']",7,"<p>Specifies 90° and 60° serrations and the T-nuts applicable to 90° and 60° serrations for mounting the top jaws on the base jaws of power chucks, in order to ensure interchangeability.</p>"

17100,IS,,ISO 9402:1989,Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections,Tubes en acier sans soudure et soudés (sauf à l'arc immergé) pour service sous pression — Contrôle par flux de fuite à l'aide de palpeurs magnétiques sur toute la circonférence des tubes d'aciers ferromagnétiques pour la détection des imperfections longitudinales,1989-06-29,1,"['77.040.20','23.040.10','77.140.75']",ISO/TC 17/SC 19,9599,,[44678],"['en','fr']",5,"<p>Applicable to the inspection of tubes with an outside diameter greater than or equal to 9

26836,IS,,ISO 9405:2001,Textile floor coverings — Assessment of changes in appearance,Revêtements de sol textiles — Évaluation des changements d'aspect,2001-03-15,1,['97.150'],ISO/TC 219,9599,[17104],"[37180,58044]","['en','fr']",7,

17105,IS,,ISO 9406:1988,Carbonaceous materials for the production of aluminium — Green coke — Determination of volatile matter content by gravimetric analysis,Produits carbonés utilisés pour la production de l'aluminium — Coke cru — Détermination de la teneur en matières volatiles par gravimétrie,1988-12-15,1,['71.100.10'],ISO/TC 226,9599,,[25255],"['en','fr']",3,

17106,IS,,ISO 9407:1991,Shoe sizes — Mondopoint system of sizing and marking,Pointure des chaussures — Système Mondopoint de mesure et de marquage,1991-10-24,1,['61.060'],ISO/TC 137,9599,"[9406,8641,7813]",[71594],"['en','fr']",3,"<p>Specifies the method of size marking for shoes and applies to all types of shoe, without restriction. This first edition cancels and replaces ISO 2816, ISO 3355, and ISO 3844.</p>"

17107,IS,,ISO 9408:1991,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by determining the oxygen demand in a closed respirometer,"Qualité de l'eau — Évaluation, en milieu aqueux, de la biodégradabilité aérobie 'ultime' des composés organiques — Méthode par détermination de la demande en oxygène dans un respiromètre fermé",1991-01-24,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[28120],"['en','fr']",10,

21003,IS,Cor,ISO 9408:1991/Cor 1:1992,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by determining the oxygen demand in a closed respirometer — Technical Corrigendum 1,"Qualité de l'eau — Évaluation, en milieu aqueux, de la biodégradabilité aérobie 'ultime' des composés organiques — Méthode par détermination de la demande en oxygène dans un respiromètre fermé — Rectificatif technique 1",1992-07-02,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[28120],"['en','fr']",2,

17108,IS,,ISO 9409-1:1988,Manipulating industrial robots — Mechanical interfaces — Part 1: Circular (form A),Robots manipulateurs industriels — Interfaces mécaniques — Partie 1: Interfaces circulaires (forme A),1988-12-29,1,['25.040.30'],ISO/TC 184,9599,,[20624],['en'],3,

20624,IS,,ISO 9409-1:1996,Manipulating industrial robots — Mechanical interfaces — Part 1: Plates (form A),Robots manipulateurs industriels — Interfaces mécaniques — Partie 1: Interfaces à plateau (forme A),1996-01-18,2,['25.040.30'],ISO/TC 184,9599,[17108],[36578],"['en','fr']",3,"<p>Defines the main dimensions, designation and marking for a circular plate as mechanical interface. Is intended to ensure the exchangeability and to keep the orientation of hand-mounted end effectors.</p>"

30479,IS,Cor,ISO 9409-1:1996/Cor 1:1998,Manipulating industrial robots — Mechanical interfaces — Part 1: Plates (form A) — Technical Corrigendum 1,Robots manipulateurs industriels — Interfaces mécaniques — Partie 1: Interfaces à plateau (forme A) — Rectificatif technique 1,1998-07-09,2,['25.040.30'],ISO/TC 184,9599,,[36578],"['en','fr']",2,

20625,IS,,ISO 9409-2:1996,Manipulating industrial robots — Mechanical interfaces — Part 2: Shafts (form A),Robots manipulateurs industriels — Interfaces mécaniques — Partie 2: Interfaces à queue (forme A),1996-01-18,1,['25.040.30'],ISO/TC 184,9599,,[36579],"['en','fr']",5,"<p>Defines the main dimensions, designation and marking for a shaft as mechanical interface. Is intended to ensure the exchangeability and to keep the orientation of hand-mounted end effectors.</p>"

17110,IS,,ISO 9411-1:1994,Solid mineral fuels — Mechanical sampling from moving streams — Part 1: Coal,Combustibles minéraux solides — Échantillonnage mécanique sur minéraux en mouvement — Partie 1: Charbon,1994-10-27,1,['73.040'],ISO/TC 27/SC 4,9599,,"[2004,1986,2022,1932,1977,1959,2013,2040]","['en','fr']",89,"<p>Provides recommended practices for the mechanical sampling of solid mineral fuels from moving streams. Applicable to the mechanical sampling and preparation of coal samples for the determination of total moisture, general analysis, including physical and chemical tests, and size analysis. Describes the basic requirements, together with typical examples of applications für guidance

17111,IS,,ISO 9411-2:1993,Solid mineral fuels — Mechanical sampling from moving streams — Part 2: Coke,Combustibles minéraux solides — Échantillonnage mécanique sur minéraux en mouvement — Partie 2: Coke,1993-10-28,1,['75.160.10'],ISO/TC 27/SC 4,9599,,"[2004,2022,1986,1932,1977,1959,2013,2040]","['en','fr']",57,"<p>Is applicable to the mechanical sampling of coke from moving streams for physical testing, general analysis and the determination of total moisture in the coke. Methods for the preparation of these samples are also described. Apart from the taking of primary increments and primary increment division, describes the on-line single stage crushing and division of the moisture sample.

17113,IS,,ISO 9413:1998,Tyre valves — Dimensions and designation,Valves pour pneumatiques — Dimensions et désignation,1998-12-20,1,['83.160.01'],ISO/TC 31/SC 9,9599,[18542],[46219],"['en','fr']",73,

26090,IS,Amd,ISO 9413:1998/Amd 1:2001,Tyre valves — Dimensions and designation — Amendment 1: Addition of valves using ISO core chamber No.3,Valves pour pneumatiques — Dimensions et désignation — Amendement 1: Ajout des valves utilisant le logement de mécanisme ISO No 3,2001-10-18,1,['83.160.01'],ISO/TC 31/SC 9,9599,,[46219],"['en','fr']",2,

36623,IS,Amd,ISO 9413:1998/Amd 2:2004,Tyre valves — Dimensions and designation — Amendment 2,Valves pour pneumatiques — Dimensions et désignation — Amendement 2,2004-10-14,1,['83.160.01'],ISO/TC 31/SC 9,9599,,[46219],"['en','fr']",30,

46219,IS,,ISO 9413:2012,Tyre valves — Dimensions and designation,Valves pour pneumatiques — Dimensions et désignation,2012-02-22,2,['83.160.01'],ISO/TC 31/SC 9,9599,"[26090,36623,17113]",[72626],"['en','fr']",118,"<p>ISO 9413:2012 defines the essential dimensions and the designation of tube valves and tubeless valves.</p><p>It also gives the correspondence between ISO designations and the designations established by: TRA, ETRTO and JATMA.</p>"

61850,IS,Amd,ISO 9413:2012/Amd 1:2012,Tyre valves — Dimensions and designation — Amendment 1,Valves pour pneumatiques — Dimensions et désignation — Amendement 1,2012-09-24,2,['83.160.01'],ISO/TC 31/SC 9,9599,,[72626],"['en','fr']",1,

17117,IS,,ISO 9416:1998,Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory),Papier — Détermination des coefficients de diffusion et d'absorption de la lumière (utilisation de la théorie de Kubelka-Munk),1998-02-19,1,"['85.060','85.040']",ISO/TC 6,9599,,[39773],"['en','fr']",8,

39773,IS,,ISO 9416:2009,Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory),Papier — Détermination des coefficients de diffusion et d'absorption de la lumière (utilisation de la théorie de Kubelka-Munk),2009-04-17,2,"['85.060','85.040']",ISO/TC 6,9599,[17117],[69093],['en'],9,"<p>ISO 9416:2009 specifies a method for the calculation of light-scattering and light-absorption coefficients based upon diffuse reflectance measurements made under the conditions specified in ISO 2469 using the colour matching function and CIE illuminant C.</p><p>It is emphasized that the strict evaluation of the light-scattering and light-absorption coefficients requires

17125,IS,,ISO 9424:1989,Wood-based panels — Determination of dimensions of test pieces,Panneaux à base de bois — Détermination des dimensions des éprouvettes,1989-10-05,1,['79.060.01'],ISO/TC 89,9599,"[5045,9339,5173]",[25155],"['en','fr']",2,"<p>Specifies a method for measuring the thickness, length and width of panels such as fibre building boards as defined in ISO 818, particle boards as defined in ISO 820 as well as plywood as defined in ISO 2074. Describes the apparatus, sampling, dimensions and conditioning of test pieces, and the procedure.</p>"

17126,IS,,ISO 9425:1989,Wood-based panels — Determination of moisture content,Panneaux à base de bois — Détermination de l'humidité,1989-09-28,1,['79.060.01'],ISO/TC 89,9599,"[5046,5178,9341]",[32837],"['en','fr']",2,"<p>Covers fibre building boards as defined in ISO 818, particle boards as defined in ISO 820, as well as plywood as defined in ISO 2074. The principle involves the determination, by weighing, of the loss in mass of a test piece between its state at the time of sampling and its state after drying to constant mass, and the calculation of this loss in mass after drying.</p>"

17127,IS,,ISO 9426-1:1989,"Wood-based panels — Determination of dimensions — Part 1: Determination of thickness, width and length","Panneaux à base de bois — Détermination des dimensions — Partie 1: Détermination de l'épaisseur, de la largeur et de la longueur",1989-11-23,1,['79.060.01'],ISO/TC 89,9599,,[32854],"['en','fr']",2,"<p>Specifies measuring methods for fibre building boards as defined in ISO 818, particle boards as defined in ISO 820, as well as plywood as defined in ISO 2074. Applies to all flat panels. Describes the apparatus, sampling and conditioning, and the procedure.</p>"

17129,IS,,ISO 9427:1989,Wood-based panels — Determination of density,Panneaux à base de bois — Détermination de la masse volumique,1989-10-26,1,['79.060.01'],ISO/TC 89,9599,"[9340,5171,5176]",[32853],"['en','fr']",2,"<p>Applies to fibre building boards as defined in ISO 818, particle boards as defined in ISO 820, as well as plywood as defined in ISO 2074. The principle of the method specified involves the determination of the mass ratio, in grammes, of each test piece to its volume, in cubic centimeters.</p>"

17140,IS,,ISO 9438:1989,Metallurgical-grade fluorspar — Determination of total phosphorus content — Reduced molybdophosphate spectrometric method,Spaths fluor utilisables dans l'industrie métallurgique — Dosage du phosphore total — Méthode spectrométrique au molybdophosphate réduit,1989-11-09,1,['73.080'],ISO/TC 175,9599,,[17141],"['en','fr']",5,

17142,IS,,ISO 9439:1990,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by analysis of released carbon dioxide,"Qualité de l'eau — Évaluation, en milieu aqueux, de la biodégradabilité aérobie 'ultime' des composés organiques — Méthode par dosage du dioxyde de carbone dégagé",1990-11-22,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[26727],"['en','fr']",9,

21002,IS,Cor,ISO 9439:1990/Cor 1:1992,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by analysis of released carbon dioxide — Technical Corrigendum 1,"Qualité de l'eau — Évaluation, en milieu aqueux, de la biodégradabilité aérobie 'ultime' des composés organiques — Méthode par dosage du dioxyde de carbone dégagé — Rectificatif technique 1",1992-06-18,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[26727],"['en','fr']",1,

17146,IS,,ISO 9443:1991,Heat-treatable and alloy steels — Surface quality classes for hot-rolled round bars and wire rods — Technical delivery conditions,Aciers pour traitements thermiques et aciers alliés — Classes de qualité de surface des ronds et fils-machine laminés à chaud — Conditions techniques de livraison,1991-11-07,1,"['77.140.10','77.140.60','77.140.20']",ISO/TC 17/SC 4,9599,,[70647],"['en','fr']",6,"<p>Applies particularly to steels for engineering applications, but may, by agreement, also be applied to structural steels or tool steels. Does not include any requirements for the permissible depth of surface decarburization. Annex A is for information only.</p>"

17147,IS,,ISO 9444:1990,Hot-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form,Larges bandes et tôles en acier inoxydable laminées à chaud — Tolérances sur dimensions et forme,1990-06-28,1,"['77.140.50','77.140.20']",ISO/TC 17/SC 4,9599,,[26687],"['en','fr']",5,

26687,IS,,ISO 9444:2002,"Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths — Tolerances on dimensions and form","Bandes, tôles et feuillards coupés à longueur en acier inoxydable laminés à chaud en continu — Tolérances sur les dimensions et la forme",2002-11-12,2,"['77.140.50','77.140.20']",ISO/TC 17/SC 4,9599,"[17149,17147]","[50345,50338]","['en','fr']",10,<p>ISO 9444 specifies the tolerances on dimensions and form for continuously hot-rolled stainless steel narrow strip in actual widths of less than 600 mm. It also applies to cut lengths taken from such strip.</p><p>This International Standard also specifies the tolerances on dimensions and form for continuously h

17148,IS,,ISO 9445:1990,Cold-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form,Larges bandes et tôles en acier inoxydable laminées à froid — Tolérances sur dimensions et forme,1990-06-28,1,"['77.140.50','77.140.20']",ISO/TC 17/SC 4,9599,,[26688],"['en','fr']",4,

26688,IS,,ISO 9445:2002,"Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths — Tolerances on dimensions and form","Feuillards, larges bandes, tôles et feuillards coupés à longueur en acier inoxydable laminés à froid en continu — Tolérances sur les dimensions et la forme",2002-11-12,2,"['77.140.50','77.140.20']",ISO/TC 17/SC 4,9599,"[17148,17150]","[44433,44434]","['en','fr']",14,"<p>ISO 9445 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less than 600 mm. It also applies to cut lengths taken from such strip.</p><p>This Inte

17149,IS,,ISO 9446:1990,Hot-rolled stainless steel narrow strip — Tolerances on dimensions and form,Feuillards en acier inoxydable laminés à chaud — Tolérances sur dimensions et forme,1990-06-28,1,"['77.140.10','77.140.50','77.140.20']",ISO/TC 17/SC 4,9599,,[26687],"['en','fr']",4,

17150,IS,,ISO 9447:1990,Cold-rolled stainless steel narrow strip — Tolerances on dimensions and form,Feuillards en acier inoxydable laminés à froid — Tolérances sur dimensions et forme,1990-06-28,1,"['77.140.10','77.140.50','77.140.20']",ISO/TC 17/SC 4,9599,,[26688],"['en','fr']",5,

17151,IS,,ISO 9448-1:1991,Tools for pressing — Guide bushes — Part 1: Forms,Outillage de presse — Bagues de guidage — Partie 1: Formes,1991-10-24,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[60707],"['en','fr']",2,<p>Establishes a classification and an identification of guide bushes. Covers seven main forms of guide bushes and their methods of mounting.</p>

17160,IS,,ISO 9448-10:1992,"Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2","Outillage de presse — Bagues de guidage — Partie 10: Forme E, bagues à collerette à brider pour guidage lisse, type 2",1992-05-20,1,['25.120.10'],ISO/TC 29/SC 8,9599,,"[29913,60716]","['en','fr']",4,"<p>Specifies the main dimensions and tolerances, gives guidance on materials, and specifies the hardness and the designation.</p>"

17161,IS,,ISO 9448-11:1992,"Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2","Outillage de presse — Bagues de guidage — Partie 11: Forme F, bagues à collerette à brider pour guidage à billes, type 2",1992-05-28,1,['25.120.10'],ISO/TC 29/SC 8,9599,,"[29914,60717]","['en','fr']",4,"<p>Specifies the main dimensions and tolerances, gives guidance on materials, and specifies the hardness and the designation.</p>"

17152,IS,,ISO 9448-2:1991,"Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1","Outillage de presse — Bagues de guidage — Partie 2: Forme A, bagues lisses pour guidage lisse, type 1",1991-10-24,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[60708],"['en','fr']",3,"<p>Specifies the main dimensions and tolerances, as well as the hardness and the designation of bushes. Gives guidance on the materials. Details not stated are left to the manufacturer's discretion. Annex A is for information only.</p>"

17153,IS,,ISO 9448-3:1991,"Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1","Outillage de presse — Bagues de guidage — Partie 3: Forme B, bagues lisses pour guidage à billes, type 1",1991-10-24,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[60709],"['en','fr']",4,"<p>Specifies the main dimensions and tolerances, as well as the hardness and the designation of bushes. Gives guidance on the materials. Details not stated are left to the manufacturer's discretion. Annex A is for information only.</p>"

17154,IS,,ISO 9448-4:1991,"Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1","Outillage de presse — Bagues de guidage — Partie 4: Forme C, bagues à collerette pour guidage lisse, type 1",1991-10-24,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[60710],"['en','fr']",4,"<p>Specifies the main dimensions and tolerances, as well as the hardness and the designation of bushes. Gives guidance on the materials. Details not stated are left to the manufacturer's discretion. Annex A is for information only.</p>"

17155,IS,,ISO 9448-5:1991,"Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1","Outillage de presse — Bagues de guidage — Partie 5: Forme D, bagues à collerette pour guidage à billes, type 1",1991-10-24,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[60711],"['en','fr']",4,"<p>Specifies the main dimensions and tolerances, as well as the hardness and the designation of bushes. Gives guidance on the materials. Details not stated are left to the manufacturer's discretion. Annex A is for information only.</p>"

17156,IS,,ISO 9448-6:1991,"Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1","Outillage de presse — Bagues de guidage — Partie 6: Forme E, bagues à collerette à brider pour guidage lisse, type 1",1991-10-24,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[60712],"['en','fr']",4,"<p>Specifies the main dimensions and tolerances, as well as the hardness and the designation of bushes. Gives guidance on the materials. Details not stated are left to the manufacturer's discretion. Annex A is for information only.</p>"

17157,IS,,ISO 9448-7:1991,"Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1","Outillage de presse — Bagues de guidage — Partie 7: Forme F, bagues à collerette à brider pour guidage à billes, type 1",1991-10-24,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[60713],"['en','fr']",4,"<p>Specifies the main dimensions and tolerances, as well as the hardness and the designation of bushes. Gives guidance on the materials. Details not stated are left to the manufacturer's discretion. Annex A is for information only.</p>"

17158,IS,,ISO 9448-8:1991,"Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1","Outillage de presse — Bagues de guidage — Partie 8: Forme G, bagues lisses à gorge pour guidage lisse, type 1",1991-10-24,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[60714],"['en','fr']",4,"<p>Specifies the main dimensions and tolerances, as well as the hardness and the designation of bushes. Gives guidance on the materials. Details not stated are left to the manufacturer's discretion. Annex A is for information only.</p>"

17159,IS,,ISO 9448-9:1992,"Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2","Outillage de presse — Bagues de guidage — Partie 9: Forme B, bagues lisses pour guidage à billes, type 2",1992-05-28,1,['25.120.10'],ISO/TC 29/SC 8,9599,,"[29912,60715]","['en','fr']",3,"<p>Specifies the main dimensions and tolerances, gives guidance on materials, and specifies the hardness and the designation.</p>"

17162,IS,,ISO 9449:1990,Tools for moulding — Centring sleeves,Outillage de moulage — Douilles de centrage,1990-11-29,1,['25.120.30'],ISO/TC 29/SC 8,9599,,[44035],"['en','fr']",2,"<p>Specifies the dimensions and tolerances for centring sleeves intended to be used for locating the spacing blocks in relation to the fixed clamp plates in moulds. Gives examples of materials and hardness, and specifies the designation of centring sleeves.</p>"

41501,IS,,ISO 945-1:2008,Microstructure of cast irons — Part 1: Graphite classification by visual analysis,Microstructure des fontes — Partie 1: Classification du graphite par analyse visuelle,2008-11-14,1,['77.080.10'],ISO/TC 25,9599,[5365],[66644],"['en','fr']",19,"<p>ISO 945-1:2008 specifies a method of classifying the microstructure of graphite in cast irons by comparative visual analysis.</p><p>The purpose of this part of ISO 945 is to provide information about the method of graphite classification. It is not intended to give information on the suitability of cast-iron types and grades for any particular application.</p><p>The particular material grade is specified by results from tensi

55897,IS,Cor,ISO 945-1:2008/Cor 1:2010,Microstructure of cast irons — Part 1: Graphite classification by visual analysis — Technical Corrigendum 1,Microstructure des fontes — Partie 1: Classification du graphite par analyse visuelle — Rectificatif technique 1,2010-02-25,1,['77.080.10'],ISO/TC 25,9599,,[66644],"['en','fr']",2,

66644,IS,,ISO 945-1:2017,Microstructure of cast irons — Part 1: Graphite classification by visual analysis,Microstructure des fontes — Partie 1: Classification du graphite par analyse visuelle,2017-12-14,2,['77.080.10'],ISO/TC 25,9599,"[41501,55897]",[77568],"['en','fr']",32,"<p>ISO 945-1:2017 specifies a method of classifying the microstructure of graphite in cast irons by comparative visual analysis.</p><p>The purpose of this document is to provide information about the method of graphite classification. It is not intended to give information on the suitability of cast-iron types and grades for any particular application.</p><p>The particular material grades are specified mainly by mechani

5365,IS,,ISO 945:1975,Cast iron — Designation of microstructure of graphite,Fonte — Désignation de la microstructure du graphite,1975-11-01,1,['77.080.10'],ISO/TC 25,9599,,"[35127,41501]","['en','fr']",8,"<p>This method of designating the microstructure of graphite is not intended as a basis for acceptance specifications. Specifies general, sampling, microscopic examination, reference diagramms, designation of graphite by form, distribution and size.</p>"

17166,IS,,ISO 9453:1990,Soft solder alloys — Chemical compositions and forms,Alliages de brasage tendre — Composition chimique et formes,1990-11-15,1,['25.160.50'],ISO/TC 44/SC 12,9599,,"[41923,37636]","['en','fr']",4,"<p>Specifies the requirements for chemical composition for the following soft solder alloys: tin-lead, with and without antimony; tin-silver, with and without lead; tin-copper, with and without lead; tin-antimony; tin-lead-bismuth; bismuth-tin; tin-lead-cadmium; tin-indium; lead-silver, with and without tin.</p>"

41923,IS,,ISO 9453:2006,Soft solder alloys — Chemical compositions and forms,Alliages de brasage tendre — Compositions chimiques et formes,2006-09-22,2,['25.160.50'],ISO/TC 44/SC 12,9599,[17166],"[51107,59299]","['en','fr']",10,"<p>ISO 9453:2006 specifies the requirements for chemical composition for the following families of soft solder alloys:</p><ul><li>tin-lead, with and without antimony, bismuth, cadmium, copper, and silver;</li><li>tin-antimony;</li><li>tin-bismuth;</li><li>tin-copper, with and without silver;</li><li>tin-indium, with and without silver and bismuth;</li><li>tin-silver, with and without copper and bismuth;</li><li>tin-zinc, with and without bismuth.</li></ul><p>ISO 9453

59299,IS,,ISO 9453:2014,Soft solder alloys — Chemical compositions and forms,Alliages de brasage tendre — Compositions chimiques et formes,2014-08-18,3,['25.160.50'],ISO/TC 44/SC 12,9599,[41923],[78822],"['en','fr','ru']",16,"<p>ISO 9453:2014 specifies the requirements for chemical composition for soft solder alloys containing two or more of tin, lead, antimony, copper, silver, bismuth, zinc, indium and/or cadmium.</p>"

17167,IS,,ISO 9454-1:1990,"Soft soldering fluxes — Classification and requirements — Part 1: Classification, labelling and packaging","Flux de brasage tendre — Classification et caractéristiques — Partie 1: Classification, marquage et emballage",1990-11-22,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[57831],"['en','fr']",5,"<p>Specifies a coding system for the classification of fluxes intended for use with soft solders, according to their active fluxing ingredients, together with requirements for labelling and packaging. Annex A tabulates the testing of fluxes.</p>"

2386,IS,,ISO 9454-2:1998,Soft soldering fluxes — Classification and requirements — Part 2: Performance requirements,Flux de brasage tendre — Classification et caractéristiques — Partie 2: Prescriptions de performance,1998-08-20,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[81206],"['en','fr']",7,

17168,IS,,ISO 9455-1:1990,"Soft soldering fluxes — Test methods — Part 1: Determination of non-volatile matter, gravimetric method",Flux de brasage tendre — Méthodes d'essai — Partie 1: Dosage des matières non volatiles par gravimétrie,1990-11-15,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[84155],"['en','fr']",2,"<p>Specifies a gravimetric method for the determination of the content of non-volatile matter in soft soldering fluxes. Applies to liquid and paste fluxes of type 1, as defined in ISO 9454-1.</p>"

17177,IS,,ISO 9455-10:1998,"Soft soldering fluxes — Test methods — Part 10: Flux efficacy tests, solder spread method","Flux de brasage tendre — Méthodes d'essai — Partie 10: Essais d'efficacité du flux, méthode d'étalement",1998-08-13,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[54322],"['en','fr']",9,