Withdrawn and superseded ISO standards — page 180 of 246

41014,IS,,ISO 9004:2009,Managing for the sustained success of an organization — A quality management approach,Gestion des performances durables d'un organisme — Approche de management par la qualité,2009-10-30,3,"['03.120.10','03.100.70']",ISO/TC 176/SC 2,9599,[28692],[70397],"['en','es','fr','ru']",46,"<p>ISO 9004:2009 provides guidance to organizations to support the achievement of sustained success by a quality management approach. It is applicable to any organization, regardless of size, type and activity.</p><p>ISO 9004:2009 is not intended for certification, regulatory or contractual use.</p>"

16547,IS,,ISO 9005:1994,Uranium dioxide powder and sintered pellets — Determination of oxygen/uranium atomic ratio — Amperometric method,Poudre et pastilles frittées de dioxyde d'uranium — Détermination du rapport atomique oxygène/uranium — Méthode ampérométrique,1994-10-20,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[37593],"['en','fr']",9,"<p>Specifies an analytical method for the determination of the oxygen/uranium ratio in uranium dioxide powder and sintered pellets. The method is applicable to reactor grade samples of hyperstoichiometric uranium dioxide powder and pellets. The limit of detection for deviation from stoichiometric composition is 2,002 for uranium dioxide powder and 2,000 2 for s

16552,IS,,ISO 9010:1987,Synchronous belt drives — Automotive belts,Transmissions synchrones par courroies — Courroies pour la construction automobile,1987-12-17,1,['43.060.10'],ISO/TC 41/SC 4,9599,,[21431],"['en','fr']",4,

21431,IS,,ISO 9010:1997,Synchronous belt drives — Automotive belts,Transmissions synchrones par courroies — Courroies pour la construction automobile,1997-04-10,2,['43.060.10'],ISO/TC 41/SC 4,9599,[16552],[74775],"['en','fr']",12,

16554,IS,,ISO 9011:1987,Synchronous belt drives — Automotive pulleys,Transmissions synchrones par courroies — Poulies pour la construction automobile,1987-12-17,1,['43.060.10'],ISO/TC 41/SC 4,9599,,[21432],"['en','fr']",4,

21432,IS,,ISO 9011:1997,Synchronous belt drives — Automotive pulleys,Transmissions synchrones par courroies — Poulies pour la construction automobile,1997-04-10,2,['43.060.10'],ISO/TC 41/SC 4,9599,[16554],[74775],"['en','fr']",8,

16556,IS,,ISO 9012:1988,Air-aspirated hand blowpipes — Specifications,Chalumeaux manuels aéro-gaz à air aspiré — Spécifications,1988-04-07,1,['25.160.30'],ISO/TC 44/SC 8,9599,,[28605],"['en','fr']",7,

28605,IS,,ISO 9012:1998,Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests,Équipement de soudage aux gaz — Chalumeaux manuels aéro-gaz à air aspiré — Spécifications et essais,1998-09-10,2,['25.160.30'],ISO/TC 44/SC 8,9599,[16556],[40645],"['en','fr']",10,

40645,IS,,ISO 9012:2008,Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests,Équipement de soudage aux gaz — Chalumeaux manuels aéro-gaz à air aspiré — Spécifications et essais,2008-02-07,3,['25.160.30'],ISO/TC 44/SC 8,9599,[28605],[77246],"['en','fr','ru']",12,"<p>ISO 9012:2008 specifies requirements and test methods for air-aspirated hand blowpipes.</p><p>ISO 9012:2008 applies to blowpipes for brazing, soldering, heating, fusion and other allied thermal processes, which use a fuel gas and aspirated air (injector-type blowpipes), and are intended for manual use.</p><p>ISO 9012:2008 is applicable to: air-aspirated hand blowpipes which are fed with a fuel gas in the

16557,IS,,ISO 9013:1992,Welding and allied processes — Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces,Soudage et techniques connexes — Classes de qualité et tolérances dimensionnelles des surfaces métalliques découpées par oxycoupage à la flamme,1992-09-24,1,['25.160.10'],ISO/TC 44/SC 8,9599,,[29998],"['en','fr']",9,<p>Is valid for materials suitable for oxygen cutting and for workpiece thicknesses from 3 mm to 300 mm. Requires quality classification and dimensional tolerances.</p>

29998,IS,,ISO 9013:2002,Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances,Coupage thermique — Classification des coupes thermiques — Spécification géométrique des produits et tolérances relatives à la qualité,2002-10-03,2,['25.160.10'],ISO/TC 44/SC 8,9599,[16557],[60321],"['en','fr']",25,"<p>International Standard ISO 9013 applies to materials suitable for oxyfuel flame cutting, plasma cutting and laser cutting. It is applicable to flame cuts from 3 mm to 300 mm, plasma cuts from 1 mm to 150 mm and to laser cuts from 0,5 mm to 40 mm. This International Standard includes geometrical product specifications and quality tolerances.</p><p>

29987,IS,,ISO 9015-2:2003,Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints,Essais destructifs des soudures sur matériaux métalliques — Essais de dureté — Partie 2: Essai de microdureté des assemblages soudés,2003-11-11,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[67257],"['en','fr']",9,"<p>ISO 9015-2:2003 specifies microhardness tests on transverse sections of welded joints of metallic materials with high hardness gradients. It covers Vickers hardness tests in accordance with ISO 6507-1, normally with test loads of 0,98 N to less than 49 N (HV 0,1 to less than HV 5).</p>"

32825,IS,,ISO 9016:2001,"Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination","Essais destructifs des soudures sur matériaux métalliques — Essai de flexion par choc — Position de l'éprouvette, orientation de l'entaille et examen",2001-03-29,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[62318],"['en','fr']",7,

62318,IS,,ISO 9016:2012,"Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination","Essais destructifs des soudures sur matériaux métalliques — Essai de flexion par choc — Position de l'éprouvette, orientation de l'entaille et examen",2012-11-05,2,['25.160.40'],ISO/TC 44/SC 5,9599,[32825],[81122],"['en','fr','ru']",7,<p>ISO 9016:2012 specifies mainly the method to be used when describing test specimen location and notch orientation for the testing and reporting of impact tests on welded butt joints.</p><p>ISO 9016:2012 applies to impact tests on metallic materials in all forms of product made by any fusion welding process.</p

32826,IS,,ISO 9017:2001,Destructive tests on welds in metallic materials — Fracture test,Essais destructifs des soudures sur matériaux métalliques — Essai de texture,2001-04-12,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[73808],"['en','fr']",13,

32827,IS,,ISO 9018:2003,Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints,Essais destructifs des soudures sur matériaux métalliques — Essai de traction des assemblages en croix et à recouvrement,2003-11-27,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[67258],"['en','fr']",8,<p>IS0 9018:2003 specifies the sizes of test pieces and test specimens and the procedure for carrying out tensile tests in order to determine the tensile strength and the location of fracture of welded joints with transverse stressed fillet welds. It applies to metallic materials with welded cruciform and lapped joints on plates.</p><p>Information concerning evaluation of test results

16563,IS,,ISO 9019:1987,Securities — Numbering of certificates,Valeurs mobilières — Numérotation des titres/certificats,1987-09-10,1,['03.060'],ISO/TC 68,9599,,[22737],"['en','fr']",2,

16564,IS,,ISO 9020:1994,Binders for paints and varnishes — Determination of free-formaldehyde content of amino resins — Sodium sulfite titrimetric method,Liants pour peintures et vernis — Détermination de la teneur en formaldéhyde libre dans les résines aminoplastes — Méthode titrimétrique au sulfite de sodium,1994-02-03,1,['87.060.20'],ISO/TC 35,9599,,"[39058,29197]","['en','fr']",4,"<p>The method specified is based on reacting free formaldehyde and alcohol formaldehyde semiacetals in a test portion with excess sodium sulfite solution at a temperature of 0 °C to form hydroxymethane sulfonate, titrating the excess sodium sulfite with iodine solution, decomposing hydroxymethane sulfonate with

26624,IS,Cor,ISO 9020:1994/Cor 1:1996,Binders for paints and varnishes — Determination of free-formaldehyde content of amino resins — Sodium sulfite titrimetric method — Technical Corrigendum 1,Liants pour peintures et vernis — Détermination de la teneur en formaldéhyde libre dans les résines aminoplastes — Méthode titrimétrique au sulfite de sodium — Rectificatif technique 1,1996-06-06,1,['87.060.20'],ISO/TC 35,9599,,[39058],['en'],1,<p>Replaces subclause 4.5 and corrects the equation in subclause 8.1.</p>

16565,IS,,ISO 9021:1988,"Motorcycles — Controls — Types, positions and functions","Motocycles — Commandes — Types, positions et fonctions",1988-09-08,1,['43.140'],ISO/TC 22/SC 38,9599,,[71553],"['en','fr']",8,"<p>Establishes the types, positions and functions of the driver operated controls on a two-wheeled motorcycle, in order to facilitate use. Annex A gives individual requirements for levers and pedals, including the maximum and minimum dimensions and clearances. Annex B specifies controls, indicators and tell-tales for which identification is obligatory and the appropriate graphical symbols.</p>"

16566,IS,,ISO 9022-1:1994,"Optics and optical instruments — Environmental test methods — Part 1: Definitions, extent of testing","Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 1: Définitions, portée des essais",1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[55767],"['en','fr']",4,"<p>Defines terms relating to environmental tests of optical instruments and of instruments including optical assemblies and optical components, and specifies basic features of testing.</p>"

55767,IS,,ISO 9022-1:2012,"Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing","Optique et photonique — Méthodes d'essais d'environnement — Partie 1: Définitions, portée des essais",2012-04-16,2,['37.020'],ISO/TC 172/SC 1,9599,[16566],[69938],"['en','fr']",8,

16575,IS,,ISO 9022-10:1994,"Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration, dry heat or cold",Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 10: Essai combiné de vibrations sinusoïdales-chaleur sèche ou froid,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[26911],"['en','fr']",4,

26911,IS,,ISO 9022-10:1998,Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration and dry heat or cold,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 10: Essai combiné de vibrations sinusoïdales et chaleur sèche ou froid,1998-07-09,2,['37.020'],ISO/TC 172/SC 1,9599,[16575],[55773],"['en','fr']",5,

16576,IS,,ISO 9022-11:1994,Optics and optical instruments — Environmental test methods — Part 11: Mould growth,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 11: Moisissures,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[67535],"['en','fr']",8,"<p>Specifies methods for the testing of optical instruments, instruments containing optical components, and materials for optical instruments, under equivalent conditions, for their ability to resist mould growth. The purpose of testing is to investigate to what extent the optical, chemical, mechanical and electrical performance characteristics are affected by mould growth. The tests described are designed for the select

16577,IS,,ISO 9022-12:1994,Optics and optical instruments — Environmental test methods — Part 12: Contamination,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 12: Contamination,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[67536],"['en','fr']",9,"<p>Specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist contamination, i.e. contact with corrosive chemical substances. The purpose of testing is to investigate the resistance of an instrument and, in particular, of instrument surfaces, coatings or synthetic materials, to a short exposure to the contamination. T

16578,IS,,ISO 9022-13:1994,"Optics and optical instruments — Environmental test methods — Part 13: Combined shock, bump or free fall, dry heat or cold","Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 13: Essai combiné choc, secousse ou chute libre-chaleur sèche ou froid",1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[26912],"['en','fr']",5,

26912,IS,,ISO 9022-13:1998,"Optics and optical instruments — Environmental test methods — Part 13: Combined shock, bump or free fall and dry heat or cold","Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 13: Essai combiné choc, secousse ou chute libre et chaleur sèche ou froid",1998-07-09,2,['37.020'],ISO/TC 172/SC 1,9599,[16578],[55773],"['en','fr']",6,

16579,IS,,ISO 9022-14:1994,"Optics and optical instruments — Environmental test methods — Part 14: Dew, hoarfrost, ice","Optiques et instruments d'optique — Méthodes d'essais d'environnement — Partie 14: Rosée, givre, glace",1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[67537],"['en','fr']",4,"<p>Specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist dew, hoarfrost or ice. The purpose of testing is to investigate to what extent the optical, thermal, mechanical and electrical performance characteristics are affected by dew, hoarfrost or ice.</p>"

16580,IS,,ISO 9022-15:1994,"Optics and optical instruments — Environmental test methods — Part 15: Combined random vibration wide band: reproducibility medium, in dry heat or cold",Optique et instruments d'optique — Méthodes d'essai d'environnement — Partie 15: Essai combiné vibrations aléatoires à large bande (reproductibilité moyenne)-chaleur sèche ou froid,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[26913],"['en','fr']",7,

26913,IS,,ISO 9022-15:1998,Optics and optical instruments — Environmental test methods — Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 15: Essai combiné vibrations à large bande (asservissement numérique) et chaleur sèche ou froid,1998-07-09,2,['37.020'],ISO/TC 172/SC 1,9599,[16580],[55773],"['en','fr']",7,

16581,IS,,ISO 9022-16:1994,"Optics and optical instruments — Environmental test methods — Part 16: Combined bounce or steady-state acceleration, in dry heat or cold",Optique et instruments d'optique — Méthodes d'essai d'environnement — Partie 16: Essai combiné secousse ou accélération constante-chaleur sèche ou froid,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[26914],"['en','fr']",4,

26914,IS,,ISO 9022-16:1998,Optics and optical instruments — Environmental test methods — Part 16: Combined bounce or steady-state acceleration and dry heat or cold,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 16: Essai combiné secousse ou accélération constante et chaleur sèche ou froid,1998-07-09,2,['37.020'],ISO/TC 172/SC 1,9599,[16581],[55773],"['en','fr']",5,

16582,IS,,ISO 9022-17:1994,"Optics and optical instruments — Environmental test methods — Part 17: Combined contamination, solar radiation",Optique et instruments d'optique — Méthodes d'essai d'environnement — Partie 17: Essai combiné contamination-rayonnement solaire,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[67538],"['en','fr']",4,"<p>Specifies methods of testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist combined contamination and solar radiation (here, contamination means the contact of optical instruments with corrosive chemical substances). The purpose of testing is to investigate the resistance of

16583,IS,,ISO 9022-18:1994,Optics and optical instruments — Environmental test methods — Part 18: Combined damp heat and low internal pressure,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 18: Essai combiné chaleur humide-pression interne basse,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[63138],"['en','fr']",6,"<p>Specifies methods of testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist combined damp heat and low internal pressure. The purpose of testing is to investigate to what extent the optical, thermal, chemical or electrical performance characteristics are affected by th

16584,IS,,ISO 9022-19:1994,Optics and optical instruments — Environmental test methods — Part 19: Temperature cycles combined with sinusoidal or random vibration,Optique et instruments d'optique — Méthodes d'essai d'environnement — Partie 19: Essai combiné cycles de températures-vibrations sinusoïdales ou aléatoires,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[55773],"['en','fr']",7,"<p>Specifies the method of testing of optical instruments and instruments containing optical components, under equivalent conditions, to assess their resistance to temperature cycles combined with sinusoidal or random vibration. The purpose of testing is to investigate to what extent the optical, thermal, mech

16567,IS,,ISO 9022-2:1994,"Optics and optical instruments — Environmental test methods — Part 2: Cold, heat, humidity","Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 2: Froid, chaleur, humidité",1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[34057],"['en','fr']",7,"<p>Specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist temperature and air humidity. The purpose of testing is to investigate to what extent the optical, thermal, mechanical, chemical and electrical performance characteristics are affected by temperature and/or humidity.</p>"

34057,IS,,ISO 9022-2:2002,"Optics and optical instruments — Environmental test methods — Part 2: Cold, heat and humidity","Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 2: Froid, chaleur et humidité",2002-10-21,2,['37.020'],ISO/TC 172/SC 1,9599,[16567],[63316],['en'],8,"<p>This part of ISO 9022 specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist temperature and air humidity.</p><p>The purpose of testing is to investigate to what extent the optical, thermal, mechanical, chemical and electrical performance characteristics of the specimen are affected by t

22462,IS,,ISO 9022-20:1997,Optics and optical instruments — Environmental test methods — Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 20: Atmosphère humide contenant du dioxyde de soufre ou de l'hydrogène sulfuré,1997-06-19,1,['37.020'],ISO/TC 172/SC 1,9599,,[66491],"['en','fr']",6,

26915,IS,,ISO 9022-21:1998,Optics and optical instruments — Environmental test methods — Part 21: Combined low pressure and ambient temperature or dry heat,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 21: Essai combiné basse pression et température ambiante ou chaleur sèche,1998-07-09,1,['37.020'],ISO/TC 172/SC 1,9599,,[63138],"['en','fr']",4,

63138,IS,,ISO 9022-23:2013,"Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambient temperature and dry and damp heat","Optique et photonique — Méthodes d'essais d'environnement — Partie 23: Essais combinés basse pression et froid, température ambiante et chaleur sèche et humide",2013-12-10,1,['37.020'],ISO/TC 172/SC 1,9599,"[26915,16583,16570]",[69939],['en'],12,"<p>ISO 9022-23:2013 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of low air p

69939,IS,,ISO 9022-23:2016,"Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat",Optique et photonique — Méthodes d'essais d'environnement — Partie 23: Basse pression combinée à la température ambiante et froide et à la chaleur sèche ou humide,2016-07-14,2,['37.020'],ISO/TC 172/SC 1,9599,[63138],[84355],['en'],13,"<p>ISO 9022-23:2016 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of low pressure combined w

16568,IS,,ISO 9022-3:1994,Optics and optical instruments — Environmental test methods — Part 3: Mechanical stress,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 3: Contraintes mécaniques,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[26910],"['en','fr']",6,

26910,IS,,ISO 9022-3:1998,Optics and optical instruments — Environmental test methods — Part 3: Mechanical stress,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 3: Contraintes mécaniques,1998-07-09,2,['37.020'],ISO/TC 172/SC 1,9599,[16568],[67342],"['en','fr']",7,

67342,IS,,ISO 9022-3:2015,Optics and photonics — Environmental test methods — Part 3: Mechanical stress,Optique et photonique — Méthodes d'essais d'environnement — Partie 3: Contraintes mécaniques,2015-02-26,3,['37.020'],ISO/TC 172/SC 1,9599,[26910],[82182],['en'],7,"<p>ISO 9022-3:2015 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of mechanical stress.</p><p>The purpose of the testing is to investigate to what extent the optical, climatic, mechanical, chemical, and electrical (including

75820,IS,Amd,ISO 9022-3:2015/Amd 1:2020,Optics and photonics — Environmental test methods — Part 3: Mechanical stress — Amendment 1,Optique et photonique — Méthodes d'essais d'environnement — Partie 3: Contraintes mécaniques — Amendement 1,2020-09-23,3,['37.020'],ISO/TC 172/SC 1,9599,,[82182],['en'],1,

16569,IS,,ISO 9022-4:1994,Optics and optical instruments — Environmental test methods — Part 4: Salt mist,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 4: Brouillard salin,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[34058],"['en','fr']",8,"<p>Specifies methods for the testing of optical instruments and instruments containing optical components under equivalent conditions, for their ability to resist salt mist. The purpose of testing is to assess as early as possible the ability of the instrument and, particularly, of its surfaces and protective coatings, to resist the effects of a salt atmosphere. Normally, representative samples or complete small units are

34058,IS,,ISO 9022-4:2002,Optics and optical instruments — Environmental test methods — Part 4: Salt mist,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 4: Brouillard salin,2002-10-21,2,['37.020'],ISO/TC 172/SC 1,9599,[16569],[66490],['en'],8,"<p>This part of ISO 9022 specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist salt mist.</p><p>Exposure to salt mist mainly results in the corrosion of metals; effects may also occur by way of clogging or binding of moving parts.</p><p>The purpose of testing is to assess as early as possible the ability of the instr

16570,IS,,ISO 9022-5:1994,"Optics and optical instruments — Environmental test methods — Part 5: Combined cold, low air pressure",Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 5: Essais combinés froid-basse pression,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[63138],"['en','fr']",4,"<p>Specifies methods for the testing of optical instruments and instruments containing optical components under equivalent conditions, for their ability to resist the combined influence of cold and low air pressure, including the potential condensation and freezing of water simultaneously acting. Is applicable to instruments designed for operation and/or transport in high mounta

16571,IS,,ISO 9022-6:1994,Optics and optical instruments — Environmental test methods — Part 6: Dust,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 6: Poussière,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[67343],"['en','fr']",4,"<p>Specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist the influence of blowing dust. The purpose of testing is to investigate to what extent the optical, thermal, mechanical, chemical and electrical performance characteristics are affected by blowing dust, especially with a view to malfunctions of moving parts. The test is no

16572,IS,,ISO 9022-7:1994,"Optics and optical instruments — Environmental test methods — Part 7: Drip, rain","Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 7: Ruissellement, pluie",1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[40749],"['en','fr']",9,"<p>Specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist drip or rain. The purpose of testing is to investigate to what extent the optical, thermal, mechanical, chemical and electrical performance characteristics are affected by drip or rain. Contamination of drip or rain water due to impurities in the air s

33549,IS,Cor,ISO 9022-7:1994/Cor 1:2001,"Optics and optical instruments — Environmental test methods — Part 7: Drip, rain — Technical Corrigendum 1","Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 7: Ruissellement, pluie — Rectificatif technique 1",2001-02-22,1,['37.020'],ISO/TC 172/SC 1,9599,,[40749],"['en','fr']",2,

40749,IS,,ISO 9022-7:2005,Optics and photonics — Environmental test methods — Part 7: Resistance to drip or rain,Optique et photonique — Méthodes d'essais environnementales — Partie 7: Résistance au ruissellement ou à la pluie,2005-11-24,2,['37.020'],ISO/TC 172/SC 1,9599,"[33549,16572]",[67345],['en'],12,"<p>ISO 9022-7:2005 specifies methods for the testing of optical instruments and instruments containing optical components under equivalent conditions, for their ability to resist drip or rain.</p><p>The purpose of testing is to investigate to what extent the optical, thermal, mechanical, chemical and electrical performance characteristics of the specimen are affected by drip or rain. Contam

16573,IS,,ISO 9022-8:1994,"Optics and optical instruments — Environmental test methods — Part 8: High pressure, low pressure, immersion","Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 8: Haute pression, basse pression, immersion",1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[67346],"['en','fr']",5,"<p>Specifies methods for the testing of optical instruments and instruments containing optical components under equivalent conditions, for their ability to resist high pressure, low pressure or immersion. The purpose of testing is to investigate to what extent the optical, thermal, mechanical, chemical and electrical performance characteristics are affected by high

16574,IS,,ISO 9022-9:1994,Optics and optical instruments — Environmental test methods — Part 9: Solar radiation,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 9: Rayonnement solaire,1994-07-07,1,['37.020'],ISO/TC 172/SC 1,9599,,[67534],"['en','fr']",4,"<p>Specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist the effects of simulated solar radiation. Is applicable to instruments that may be exposed to sunlight during operation or unsheltered storage on the earth's surface, or in the lower atmosphere. The purpose of testing is to investigate to what extent t

16588,IS,,ISO 9026:1991,Raw rubber or unvulcanized compounds — Determination of green strength,Caoutchouc brut ou mélanges de caoutchoucs non vulcanisés — Détermination de la cohésion à cru,1991-11-21,1,"['83.060','83.040.10']",ISO/TC 45/SC 2,9599,,[45390],"['en','fr']",5,"<p>Describes the principle, the apparatus, the test piece and its conditioning, the temperature of test, the test procedure, the expression of results, and the contents of the test report.</p>"

45390,IS,,ISO 9026:2007,Raw rubber or unvulcanized compounds — Determination of green strength,Caoutchouc brut ou mélanges de caoutchoucs non vulcanisés — Détermination de la cohésion à cru,2007-06-25,2,"['83.060','83.040.10']",ISO/TC 45/SC 2,9599,[16588],[82447],"['en','fr']",7,"<p>ISO 9026:2007 specifies a method for the determination of the green strength of raw rubber or unvulcanized rubber compounds using a tensile stress-strain test, the test pieces being prepared following standard test conditions or cut from calendered sheets.</p>"

16589,IS,,ISO 9028:1989,Rubber — Dissolution by acid digestion,Caoutchouc — Dissolution par attaque acide,1989-07-13,1,['83.060'],ISO/TC 45/SC 2,9599,,[43686],"['en','fr']",2,<p>Relates to methods for disintegration of raw rubber and rubber products by nitric acid or a mixture of nitric and sulphuric acids. They will be used in order to produce solutions for the determination of metals. Methods prevent loss of volatile metal derivatives or the formation of insoluble metal silicates.</p>

5307,IS,,ISO 903:1976,Aluminium oxide primarily used for the production of aluminium — Determination of untamped density,Oxyde d'aluminium principalement utilisé pour la production de l'aluminium — Détermination de la densité apparente,1976-09-01,1,['71.100.10'],ISO/TC 226,9599,,[36722],"['en','fr']",2,<p>The method based on the determination of the mass of a known volume after a free fall of the product without vibration in a stable container. Expression of the apparent density by division of this mass by the mass of a equivalent volume of water. Replaces ISO Recommendation R 903-1968.</p>

26988,IS,,ISO 9038:2002,Test for sustained combustibility of liquids,Essai de combustion entretenue de liquides,2002-10-24,1,"['13.220.40','87.040']",ISO/TC 35/SC 9,9599,[16599],[50182],"['en','fr']",11,"<p>Many national and international regulations classify liquids as presenting a flammable hazard on the basis of their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot 'sustain combustion' at some specified temperature or temperatures. This International Standard specifies a pass/fail procedure to determine whether or not a liquid product, that would be classified as 'flammable' by virtue of its flash point, has the abili

50182,IS,,ISO 9038:2013,Determination of sustained combustibility of liquids,Détermination de la combustion entretenue des liquides,2013-07-04,2,"['13.220.40','75.080','87.040']",ISO/TC 28,9599,[26988],[77086],"['en','fr']",11,"<p>ISO 9038:2013 specifies a pass/fail procedure, at temperatures up to 100 °C, to determine whether or not a liquid product, that would be classified as 'flammable' by virtue of its flash point, has the ability to sustain combustion at the temperature or temperatures specified in the appropriate regulations.</p><p>The procedure is applicable to paints (including water-borne paints), varnishes, paint binders, solvents, petroleum or related products and adhesives, whic

77086,IS,,ISO 9038:2021,Determination of sustained combustibility of liquids,Essai de combustion entretenue de liquides,2021-04-23,3,"['13.220.40','75.080','87.040']",ISO/TC 28,9599,[50182],[89383],"['en','fr']",12,"<p>This document specifies a procedure, at temperatures up to 100 °C, to determine whether a liquid product, that would be classified as “flammable” by virtue of its flash point, sustains combustion at the temperature(s) specified e.g. in regulations.</p><p>NOTE Many national and international regulations classify liquids as presenting a flammable hazard based on their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the sub

16600,IS,,ISO 9039:1994,Optics and optical instruments — Quality evaluation of optical systems — Determination of distortion,Optique et instruments d'optique — Évaluation de la qualité des systèmes optiques — Détermination de la distorsion,1994-08-04,1,['37.020'],ISO/TC 172/SC 1,9599,,[50090],"['en','fr']",14,"<p>Specifies methods of determining distortion in optical systems for the purposes of quality evaluation. Applies to optical imaging systems in the optical spectral range from 100 nm to 15 000 nm which, by their design, aim at a rotationally symmetric image geometry. Applicable to electrooptical imaging systems provided that adequate rotational symmetry of the image is guaranteed. Does

40738,IS,Cor,ISO 9039:1994/Cor 1:2004,Optics and optical instruments — Quality evaluation of optical systems — Determination of distortion — Technical Corrigendum 1,Optique et instruments d'optique — Évaluation de la qualité des systèmes optiques — Détermination de la distorsion — Rectificatif technique 1,2004-06-24,1,['37.020'],ISO/TC 172/SC 1,9599,,[50090],"['en','fr']",1,

16601,IS,,ISO 9040:1990,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Service,Technologies de l'information — Interconnexion des systèmes ouverts — Service de classe de base de terminal virtuel,1990-11-01,1,['35.100.70'],ISO/IEC JTC 1,9599,,[28785],['en'],78,

16603,IS,Amd,ISO 9040:1990/Amd 2:1992,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Service — Amendment 2,Technologies de l'information — Interconnexion des systèmes ouverts — Service de classe de base de terminal virtuel — Amendement 2,1992-10-15,1,['35.100.70'],ISO/IEC JTC 1,9599,,[28785],['en'],14,

16604,IS,Cor,ISO 9040:1990/Cor 1:1991,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Service — Technical Corrigendum 1,Technologies de l'information — Interconnexion des systèmes ouverts — Service de classe de base de terminal virtuel — Rectificatif technique 1,1991-04-11,1,['35.100.70'],ISO/IEC JTC 1,9599,,[28785],"['en','fr']",1,

21419,IS,Cor,ISO 9040:1990/Cor 2:1992,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Service — Technical Corrigendum 2,Technologies de l'information — Interconnexion des systèmes ouverts — Service de classe de base de terminal virtuel — Rectificatif technique 2,1992-12-10,1,['35.100.70'],ISO/IEC JTC 1,9599,,[28785],['en'],1,

22674,IS,Cor,ISO 9040:1990/Cor 3:1993,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Service — Technical Corrigendum 3,Technologies de l'information — Interconnexion des systèmes ouverts — Service de classe de base de terminal virtuel — Rectificatif technique 3,1993-09-02,1,['35.100.70'],ISO/IEC JTC 1,9599,,[28785],['en'],2,

16606,IS,,ISO 9041-1:1990,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Protocol — Part 1: Specification,Technologies de l'information — Interconnexion des systèmes ouverts — Protocole de classe de base de terminal virtuel — Partie 1: Spécification,1990-11-01,1,['35.100.70'],ISO/IEC JTC 1,9599,,[28786],['en'],65,

16607,IS,Amd,ISO 9041-1:1990/Amd 2:1992,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Protocol — Part 1: Specification — Amendment 2,Technologies de l'information — Interconnexion des systèmes ouverts — Protocole de classe de base de terminal virtuel — Partie 1: Spécification — Amendement 2,1992-10-15,1,['35.100.70'],ISO/IEC JTC 1,9599,,[28786],['en'],8,

21418,IS,Cor,ISO 9041-1:1990/Cor 1:1992,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Protocol — Part 1: Specification — Technical Corrigendum 1,Technologies de l'information — Interconnexion des systèmes ouverts — Protocole de classe de base de terminal virtuel — Partie 1: Spécification — Rectificatif technique 1,1992-12-10,1,['35.100.70'],ISO/IEC JTC 1,9599,,[28786],['en'],1,

22673,IS,Cor,ISO 9041-1:1990/Cor 2:1993,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Protocol — Part 1: Specification — Technical Corrigendum 2,Technologies de l'information — Interconnexion des systèmes ouverts — Protocole de classe de base de terminal virtuel — Partie 1: Spécification — Rectificatif technique 2,1993-09-02,1,['35.100.70'],ISO/IEC JTC 1,9599,,[28786],"['en','fr']",1,

16609,IS,,ISO 9042:1988,Steels — Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid,Aciers — Méthode manuelle d'estimation statistique de la fraction volumique d'un constituant à l'aide de grilles de points,1988-12-29,1,['77.040.99'],ISO/TC 17/SC 7,9599,,"[85485,77109]","['en','fr']",4,<p>Applies to constituents (a phase as well as a micrographic constituent composed of two or more phases) which are clearly identifiable. The point grid is superimposed a given number of fields of the observed surface. By counting the number of points the volume fraction is calculated.</p>

16610,IS,,ISO 9043:1991,Mopeds — Measurement method for moments of inertia,Cyclomoteurs — Méthode de mesure des moments d'inertie,1991-10-24,1,['43.140'],ISO/TC 22,9599,,[45396],"['en','fr']",7,"<p>Defines the axis systems. Describes the equipment, the position of dummy and moped, and the measuring procedure. Annex A (format to be used for measurement results) forms an integral part of this standard.</p>"

16611,IS,,ISO 9044:1990,Industrial woven wire cloth — Technical requirements and testing,Tissus métalliques industriels — Exigences techniques et vérifications,1990-09-13,1,['73.120'],ISO/TC 24/SC 8,9599,,[28424],"['en','fr']",9,

28424,IS,,ISO 9044:1999,Industrial woven wire cloth — Technical requirements and tests,Tissus métalliques industriels — Exigences techniques et vérifications,1999-08-26,2,['73.120'],ISO/TC 24/SC 8,9599,[16611],[62411],"['en','fr']",13,

16613,IS,,ISO 9046:1987,Building construction — Sealants — Determination of adhesion/cohesion properties at constant temperature,Construction immobilière — Mastics — Déterminaion des propriétés d'adhésivité/cohésion à température constante,1987-05-21,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[33679],"['en','fr']",3,"<p>Refers to sealants with predominantly plastic behaviour which are used in joints in building construction. Describes principle, apparatus, preparation of test specimens and reference specimens, conditioning, procedure and test report.</p>"

33679,IS,,ISO 9046:2002,Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants at constant temperature,Construction immobilière — Produits pour joints — Détermination des propriétés d'adhésivité/cohésion des mastics à température constante,2002-06-06,2,['91.100.50'],ISO/TC 59/SC 8,9599,[16613],[77221],"['en','fr']",4,<p>This International Standard specifies a method for the determination of the adhesion/cohesion properties of sealants with predominantly plastic behaviour which are used in joints in building construction.</p>

16614,IS,,ISO 9047:1989,Building construction — Sealants — Determination of adhesion/cohesion properties at variable temperatures,Construction immobilière — Mastics — Détermination des propriétés d'adhésivité/cohésion à températures variables,1989-10-12,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[34123],"['en','fr']",3,<p>Refers to sealants with predominantly elastic behaviour. The sealant to be tested adheres to two parallel contact surfaces of the test specimens. After submission of the test specimens to extension/compression cycles under defined conditions any breaks in adhesion or cohesion are recorded.</p>

16617,IS,,ISO 9050:1990,"Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and related glazing factors","Verre dans la construction — Détermination de la transmission lumineuse, de la transmission solaire directe, de la transmission totale de l'énergie solaire, de la transmission de l'ultraviolet et des facteurs dérivés des vitrages",1990-02-01,1,['81.040.20'],ISO/TC 160,9599,,[35062],"['en','fr']",8,"<p>Specifies Methods of determining light and energy transmission of solar radiation for glazing units in buildings. These characteristics can serve as a basis for light, heating and ventilation

35062,IS,,ISO 9050:2003,"Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors","Verre dans la construction — Détermination de la transmission lumineuse, de la transmission solaire directe, de la transmission énergétique solaire totale, de la transmission de l'ultraviolet et des facteurs dérivés des vitrages",2003-09-02,2,['81.040.20'],ISO/TC 160,9599,[16617],"[88642,54111]",['en'],27,"<p>ISO 9050:2003 specifies methods of determining light and energy transmittance of solar radiation for glazing in buildings. These characteristic data can serve as a basis for light, heating

16618,IS,,ISO 9051:1990,"Glass in building — Glazed assemblies containing fire-resistant transparent or translucent glass, for use in building","Verre dans la construction — Ensembles vitrés comportant du verre transparent ou translucide, résistant au feu, pour utilisation dans le bâtiment",1990-11-01,1,['81.040.20'],ISO/TC 160,9599,,[35086],"['en','fr']",2,"<p>Specifies the classification and marking of glass products, which will be described in future International Standards on basic or processed glass products, in assemblies for use in building and intended to provide some degree of fire-resistance, classes RE and REI.</p>"

69869,IS,,ISO 9053-1:2018,Acoustics — Determination of airflow resistance — Part 1: Static airflow method,Acoustique — Détermination de la résistance à l'écoulement de l'air — Partie 1: Méthode statique,2018-11-02,1,['91.100.60'],ISO/TC 43/SC 2,9599,[16622],[90718],"['en','fr']",9,"<p>This document specifies the measurement of the determination of the static airflow resistance^[1,2], in a laminar flow regime, of porous materials for acoustical applications.</p>"

16622,IS,,ISO 9053:1991,Acoustics — Materials for acoustical applications — Determination of airflow resistance,Acoustique — Matériaux pour applications acoustiques — Détermination de la résistance à l'écoulement de l'air,1991-06-20,1,['91.100.60'],ISO/TC 43/SC 2,9599,,"[76744,69869]","['en','fr']",9,

16627,IS,,ISO 9058:1992,Glass containers — Tolerances,Récipients en verre — Tolérances,1992-09-09,1,['55.100'],ISO/TC 63,9599,,[41965],"['en','fr']",2,<p>Specifies tolerances for glass containers of circular cross-section and nominal capacity from 50 ml to 5 000 ml.</p>

16628,IS,,ISO 9059:1990,Solar energy — Calibration of field pyrheliometers by comparison to a reference pyrheliometer,Énergie solaire — Étalonnage des pyrhéliomètres de terrain par comparaison à un pyrhéliomètre de référence,1990-10-11,1,['27.160'],ISO/TC 180/SC 1,9599,,[84175],"['en','fr']",7,

16629,IS,,ISO 9060:1990,Solar energy — Specification and classification of instruments for measuring hemispherical solar and direct solar radiation,Énergie solaire — Spécification et classification des instruments de mesurage du rayonnement solaire hémisphérique et direct,1990-10-25,1,['27.160'],ISO/TC 180/SC 1,9599,,[67464],"['en','fr']",11,"<p>Establishes a classification and specification of instruments for the measurement of hemispherical solar and direct solar radiation integrated over the spectral range from 0,3 µm to 3 µm.</p>"

16630,IS,,ISO 9061:1988,"Acid-grade and ceramic-grade fluorspar — Determination of iron content — 1,10-Phenanthroline spectrometric method","Spaths fluor pour la fabrication de l'acide fluorhydrique et spaths fluor utilisables dans l'industrie céramique — Dosage du fer — Méthode spectrométrique à la phénanthroline-1,10",1988-12-08,1,['73.080'],ISO/TC 175,9599,,[16631],"['en','fr']",3,

16632,IS,,ISO 9062:1989,Acid-grade and ceramic-grade fluorspar — Determination of manganese content — Periodate spectrometric method,Spaths fluor pour la fabrication de l'acide fluorhydrique et spaths fluor utilisables dans l'industrie céramique — Dosage du manganèse — Méthode spectrométrique au periodate,1989-03-09,1,['73.080'],ISO/TC 175,9599,,[16633],"['en','fr']",3,

16644,IS,,ISO 9070:1990,Information processing — SGML support facilities — Registration procedures for public text owner identifiers,Traitement de l'information — Facilités de support SGML — Procédures d'enregistrement pour identificateurs de propriétaire de texte public,1990-01-25,1,['35.240.30'],ISO/IEC JTC 1,9599,,[16645],['en'],,

16650,IS,,ISO 9073-1:1989,Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area,Textiles — Méthodes d'essai pour nontissés — Partie 1: Détermination de la masse surfacique,1989-06-22,1,['59.080.30'],ISO/TC 38,9599,,[83590],"['en','fr']",2,"<p>Measurement of the area and mass of a test piece and calculation of its mass per unit area in grams per square metre. In order to meet the specific needs of nonwovens, alternative requirements to those listed in ISO 3801 are specified in this part of ISO 9073. These are: a) a different sampling procedure; b) an alternative specification for dimensions of test piece; c) a greater accuracy for the balance.</p>"

30168,IS,,ISO 9073-11:2002,Textiles — Test methods for nonwovens — Part 11: Run-off,Textiles — Méthodes d'essai pour nontissés — Partie 11: Écoulement sur plan incliné,2002-10-30,1,['59.080.30'],ISO/TC 38,9599,,[88792],"['en','fr']",10,"<p>ISO 9073-11 describes test methods for measuring the quantity of test liquid (simulated urine) which runs down a nonwoven test piece when a specified mass of test liquid is poured on to the nonwoven test piece superimposed on a standard absorbent media and placed on an inclined plane.</p><p>This test method is designed to compare run-off of nonwovens. It is not intended to simulate in-use conditions of finished products.</p><p>Three alternative methods are

39393,IS,,ISO 9073-13:2006,Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time,Textiles — Méthodes d'essai pour nontissés — Partie 13: Temps de transpercement successifs des liquides,2006-04-04,1,['59.080.30'],ISO/TC 38,9599,,[83592],"['en','fr']",7,<p>ISO 9073-13:2006 specifies a test method for measuring the strike-through time (STT) for each of three subsequent doses of liquid (simulated urine) applied to the surface of a test piece of nonwoven coverstock. The STT is defined as the time taken for a known volume of liquid to pass through the nonwoven that is in contact with an underlying dry standard absorbent pad.</p><p>This test method is intended for qua

39394,IS,,ISO 9073-14:2006,Textiles — Test methods for nonwovens — Part 14: Coverstock wetback,Textiles — Méthodes d'essai pour nontissés — Partie 14: Remouillage de l'enveloppe,2006-04-04,1,['59.080.30'],ISO/TC 38,9599,,[83593],"['en','fr']",9,<p>ISO 9073-14:2006 specifies a test method to examine the ability of diaper coverstock to resist the transport back onto the skin of a liquid which has already penetrated the coverstock. This test corresponds with the repeated liquid strike-through time described in ISO 9073-13.</p><p>This test method is intended for quality control and is designed for comparison of wetback for different nonwoven coverstocks and treatments. It does not simulate in-us

42096,IS,,ISO 9073-18:2007,Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test,Textiles — Méthodes d'essai pour nontissés — Partie 18: Détermination de la résistance à la rupture et de l'allongement de matériaux nontissés par l'essai de traction à l'arrachement,2007-04-02,1,['59.080.30'],ISO/TC 38,9599,,[83594],"['en','fr']",6,"<p>ISO 9073-18:2007 specifies a grab tensile test procedure for determining the breaking strength and elongation of most nonwoven materials. It includes instructions for the testing of wet specimens.</p><p>This grab tensile test procedure is applicable for most nonwovens,

16651,IS,,ISO 9073-2:1989,Textiles — Test methods for nonwovens — Part 2: Determination of thickness,Textiles — Méthodes d'essai pour nontissés — Partie 2: Détermination de l'épaisseur,1989-06-22,1,['59.080.30'],ISO/TC 38,9599,,[16652],"['en','fr']",4,

16653,IS,,ISO 9073-3:1989,Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation,Textiles — Méthodes d'essai pour nontissés — Partie 3: Détermination de la résistance à la traction et de l'allongement,1989-06-22,1,['59.080.30'],ISO/TC 38,9599,,[83591],"['en','fr']",2,"<p>Application of a force longitudinally to a test piece of a specified length and width at a constant rate of extension. Determination of values for breaking strength and elongation from the recorded force-elongation curve. In order to meet the specific needs of nonwovens, alternative requirements to those listed in ISO 5081 are established in this part of ISO 9073. These are: a) a dif

16654,IS,,ISO 9073-4:1989,Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance,Textiles — Méthodes d'essai pour nontissés — Partie 4: Détermination de la résistance à la déchirure,1989-04-13,1,['59.080.30'],ISO/TC 38,9599,,[24985],"['en','fr']",2,

24985,IS,,ISO 9073-4:1997,Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance,Textiles — Méthodes d'essai pour nontissés — Partie 4: Détermination de la résistance à la déchirure,1997-07-10,2,['59.080.30'],ISO/TC 38,9599,[16654],[78362],"['en','fr']",3,