Withdrawn and superseded ISO standards — page 18 of 246

40149,IS,Cor,ISO 11193-1:2002/Cor 1:2005,Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Technical Corrigendum 1,"Gants en caoutchouc pour examen, non réutilisables — Partie 1: Spécifications pour gants fabriqués à partir de latex de caoutchouc ou d'une solution de caoutchouc — Rectificatif technique 1",2005-06-22,1,"['11.140','83.140.99']",ISO/TC 45/SC 4,9599,,[50766],['en'],1,

50766,IS,,ISO 11193-1:2008,Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution,"Gants en caoutchouc pour examen, non réutilisables — Partie 1: Spécifications pour gants fabriqués à partir de latex de caoutchouc ou d'une solution de caoutchouc",2008-08-26,2,"['11.140','83.140.99']",ISO/TC 45/SC 4,9599,"[40149,43713,33621]","[62493,75379]","['en','ru']",9,"<p>ISO 11193-1:2008 specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from cross-contamination. It also covers rubber gloves inten

55603,IS,Amd,ISO 11193-1:2008/Amd 1:2012,Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1,"Gants en caoutchouc pour examen, non réutilisables — Partie 1: Spécifications pour gants fabriqués à partir de latex de caoutchouc ou d'une solution de caoutchouc — Amendement 1",2012-06-18,2,"['11.140','83.140.99']",ISO/TC 45/SC 4,9599,,[75379],"['en','ru']",1,

19193,IS,,ISO 11193:1994,Single-use rubber examination gloves — Specification,"Gants en caoutchouc pour examen, non réutilisables — Spécification",1994-11-17,1,"['11.140','83.140.99']",ISO/TC 45/SC 4,9599,,"[37162,33621]","['en','fr']",7,"<p>Specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from cross-contamination. Also covers rubber gloves intended for use in handling contaminated medical materials. Applies to single-use gloves, gloves with smooth surfaces or with textured surfaces over part or all of the glove. Does not apply to gloves made

19194,IS,,ISO 11195:1995,Gas mixers for medical use — Stand-alone gas mixers,Mélangeurs de gaz à usage médical — Mélangeurs de gaz indépendants,1995-09-28,1,['11.040.10'],ISO/TC 121/SC 1,9599,,[67242],['en'],8,<p>Gives requirements for the performance and safety of stand-alone gas mixers intended for medical use and for connection to a medical gas supply system.</p>

19195,IS,,ISO 11196:1995,Anaesthetic gas monitors,Moniteurs de gaz d'anesthésie,1995-09-28,1,['11.040.10'],ISO/TC 121/SC 1,9599,,"[34637,33778]","['en','fr']",32,<p>Based on requirements of IEC 601-1. Specifies requirements for anaesthetic gas monitors used for the determination of the anaesthetic vapour and/or gas levels in breathing gas mixtures and/or fresh gas mixtures. Contains additional requirements specific to anaesthetic gas monitors and gives examples of anaesthetic gases.</p>

28347,IS,Cor,ISO 11196:1995/Cor 1:1997,Anaesthetic gas monitors — Technical Corrigendum 1,Moniteurs de gaz d'anesthésie — Rectificatif technique 1,1997-02-13,1,['11.040.10'],ISO/TC 121/SC 1,9599,,"[34637,33778]",['en'],2,<p>Replaces the existing table 2 by a new table 2 which contains some corrections.</p>

19196,IS,,ISO 11197:1996,Medical electrical equipment — Particular requirements for safety of medical supply units,Appareils électriques médicaux — Prescriptions particulières relatives à la sécurité des systèmes de distribution médicaux,1996-04-18,1,['11.040.10'],ISO/TC 121/SC 6,9599,,[34427],['en'],32,"<p>Applies to medical supply units as defined in 1.3.4 of ISO 11197. Other medical equipment, such as devices for nurse call systems, monitoring, etc., which can be incorporated in or mounted on medical supply units, are not covered by this International Standard. Such medical equipment may be the subject of additional Particular Standards.</p>"

34427,IS,,ISO 11197:2004,Medical supply units,Gaines techniques à usage médical,2004-12-01,2,['11.040.10'],ISO/TC 121/SC 6,9599,[19196],[60316],['en'],38,<p>ISO 11197:2004 specifies requirements and test methods for medical supply units intended for use in healthcare facilities to supply electric power and/ medical gases and/or liquids and anaesthetic gas scavenging systems. It is applicable in conjunction with IEC 60601-1:1988.</p><p>The requirements of ISO 11197:2004 take priority over those of IEC 60601-1:1988.</p>

60316,IS,,ISO 11197:2016,Medical supply units,Gaines techniques à usage médical,2016-02-11,3,['11.040.10'],ISO/TC 121/SC 6,9599,[34427],[74384],"['en','fr']",26,"<p><i>IEC 60601-1:2005+A1:2012, 1.1 is replaced by: </i></p><p>ISO 11197:2016 applies to the basic safety and essential performance of medical supply units, hereafter also referred to as me equipment.</p><p>ISO 11197:2016 applies to medical supply units manufactured within a factory or assembled on site, including cabinetry and other enclosures, which incorporate patient care services. </p><p>NOTE 1 A party that assembles on site various components intended for patient care services into an enclosure is considered the manufacture

19198,IS,,ISO 11199-1:1999,Walking aids manipulated by both arms — Requirements and test methods — Part 1: Walking frames,Aides à la marche manipulées avec les deux bras — Exigences et méthodes d'essai — Partie 1: Cadres de marche,1999-08-12,1,['11.180.10'],ISO/TC 173,9599,,[76651],"['en','fr']",15,

20337,IS,,ISO 11199-2:1999,Walking aids manipulated by both arms — Requirements and test methods — Part 2: Rollators,Aides à la marche manipulées avec les deux bras — Exigences et méthodes d'essai — Partie 2: Déambulateurs,1999-08-19,1,['11.180.10'],ISO/TC 173,9599,,[36053],"['en','fr']",15,

36053,IS,,ISO 11199-2:2005,Walking aids manipulated by both arms — Requirements and test methods — Part 2: Rollators,Aides à la marche manipulées avec les deux bras — Exigences et méthodes d'essai — Partie 2: Déambulateurs,2005-04-15,2,['11.180.10'],ISO/TC 173,9599,[20337],[76652],"['en','fr','ru']",22,"<p>ISO 11199-2:2005 specifies requirements and methods of testing the static stability braking capabilities, static strength and fatigue of rollators being used as walking aids with wheels, manipulated by the hands, without accessories, unless specified in the particular test procedure. ISO 11199-2:2005 also gives requirements relating to safety, ergonomics, performance, and information suppl

3912,IS,,ISO 112:1983,Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 3 degrees 30',Matériel pour l'industrie textile — Cônes pour bobinage croisé — Demi-angle du cône 3 degrés 30',1983-05-01,2,['59.120.20'],ISO/TC 72/SC 1,9599,,[21961],"['en','fr']",3,

5644,IS,,ISO 1120:1976,Conveyor belts — Determination of strength of mechanical fastenings — Static test method,Courroies transporteuses — Détermination de la résistance des assemblages agrafés — Méthode d'essai statique,1976-07-01,1,['53.040.20'],ISO/TC 41,9599,,[5645],"['en','fr']",3,

5645,IS,,ISO 1120:1984,Conveyor belts — Determination of strength of mechanical fastenings — Static test method,Courroies transporteuses — Détermination de la résistance des assemblages agrafés — Méthode d'essai statique,1984-12-01,2,['53.040.20'],ISO/TC 41/SC 3,9599,[5644],"[23851,35357]","['en','fr']",3,<p>This second edition cancels and replaces the first edition (1976). Specifies a test method for measuring the strength of a conveyor belt mechanical fastening; the joint can be of either the permanent type or capable of disconnection. Is not applicable to vulcanized joints. Some figures illustrate shapes and reference quantities of concern.</p>

35357,IS,,ISO 1120:2002,Conveyor belts — Determination of strength of mechanical fastenings — Static test method,Courroies transporteuses — Détermination de la résistance des assemblages agrafés — Méthode d'essai statique,2002-05-02,3,['53.040.20'],ISO/TC 41/SC 3,9599,[5645],[61045],['en'],6,<p>This European Standard specifies a static test method for measuring the strength of a conveyor belt mechanical fastening; the mechanical joints can be either of the type employing a connecting rod or of a type which does not employ a connecting rod.</p><p>This standard does not cover vulcanized joints.</p><p>NOTE The purpose of the test specified in this standard is to eliminate mechanical fastenings

61045,IS,,ISO 1120:2012,Conveyor belts — Determination of strength of mechanical fastenings — Static test method,Courroies transporteuses — Détermination de la résistance des assemblages agrafés — Méthode d'essai statique,2012-09-28,4,['53.040.20'],ISO/TC 41/SC 3,9599,[35357],[88628],"['en','fr']",7,<p>ISO 1120:2012 specifies a static test method for measuring the strength of a conveyor belt mechanical fastening; the mechanical joints can be either of the type employing a connecting rod or of a type which does not employ a connecting rod.</p>

21251,IS,,ISO 11200:1995,Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions,Acoustique — Bruit émis par les machines et équipements — Guide d'utilisation des normes de base pour la détermination des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées,1995-12-07,1,['17.140.20'],ISO/TC 43/SC 1,9599,,"[35377,35081]","['en','fr']",12,<p>Provides brief summaries of the basic International Standards for determining emission sound pressure levels from all types of machinery at work station and at other

27932,IS,Cor,ISO 11200:1995/Cor 1:1997,Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions — Technical Corrigendum 1,Acoustique — Bruit émis par les machines et équipements — Guide d'utilisation des normes de base pour la détermination des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées — Rectificatif technique 1,1997-01-30,1,['17.140.20'],ISO/TC 43/SC 1,9599,,"[35377,35081]","['en','fr']",2,<p>Replaces the existing figure 2 by a new figure 2.</p>

21252,IS,,ISO 11201:1995,Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Engineering method in an essentially free field over a reflecting plane,Acoustique — Bruit émis par les machines et équipements — Mesurage des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées — Méthode d'expertise dans des conditions approchant celles du champ libre sur plan réfléchissant,1995-12-27,1,['17.140.20'],ISO/TC 43/SC 1,9599,[12281],"[35082,54908]","['en','fr']",15,"<p>Specifies a method for measuring the emission sound pressure levels of machinery and equip

28386,IS,Cor,ISO 11201:1995/Cor 1:1997,Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Engineering method in an essentially free field over a reflecting plane — Technical Corrigendum 1,Acoustique — Bruit émis par les machines et équipements — Mesurage des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées — Méthode d'expertise dans des conditions approchant celles du champ libre sur plan réfléchissant — Rectificatif technique 1,1997-02-06,1,['17.140.20'],ISO/TC 43/SC 1,9599,,"[35082,54908]","['en','fr']",1,<p>Adds in the foreword the sentenc

21253,IS,,ISO 11202:1995,Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Survey method in situ,Acoustique — Bruit émis par les machines et équipements — Mesurage des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées — Méthode de contrôle in situ,1995-12-27,1,['17.140.20'],ISO/TC 43/SC 1,9599,,"[54907,35083]","['en','fr']",16,"<p>Specifies a method for measuring the emission sound pressure levels of machinery and equipment at a work station and at other specified positions nearby, in a semi-reverberant field. Emission sound pressure levels a

27933,IS,Cor,ISO 11202:1995/Cor 1:1997,Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Survey method in situ — Technical Corrigendum 1: (Applies to French version only),Acoustique — Bruit émis par les machines et équipements — Mesurage des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées — Méthode de contrôle in situ — Rectificatif technique 1,1997-01-30,1,['17.140.20'],ISO/TC 43/SC 1,9599,,"[54907,35083]",['fr'],,

21255,IS,,ISO 11204:1995,Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Method requiring environmental corrections,Acoustique — Bruit émis par les machines et équipements — Mesurage des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées — Méthode nécessitant des corrections d'environnement,1995-12-27,1,['17.140.20'],ISO/TC 43/SC 1,9599,,"[54906,35085]","['en','fr']",18,"<p>Specifies a method for measuring the emission sound pressure levels of machinery and equipment at a work station and at other specified positions nearby, in any environme

28480,IS,Cor,ISO 11204:1995/Cor 1:1997,Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Method requiring environmental corrections — Technical Corrigendum 1,Acoustique — Bruit émis par les machines et équipements — Mesurage des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées — Méthode nécessitant des corrections d'environnement — Rectificatif technique 1,1997-02-13,1,['17.140.20'],ISO/TC 43/SC 1,9599,,"[54906,35085]","['en','fr']",2,<p>Contains minor amendments and replaces the figures A.1 and A.2.</p>

19199,IS,,ISO 11210:1995,Determination of platinum in platinum jewellery alloys — Gravimetric method after precipitation of diammonium hexachloroplatinate,Dosage du platine dans les alliages de platine pour la bijouterie-joaillerie — Méthode gravimétrique après précipitation de l'hexachloroplatinate de diammonium,1995-04-27,1,['39.060'],ISO/TC 174,9599,,[57646],"['en','fr']",4,"<p>Specifies a gravimetric method for the determination of platinum in platinum jewellery alloys, preferably within the range of fineness stated in ISO 9202. These alloys may contain palladium, iridium, rhodium, copper, cobalt, gold, ruthenium, gallium, chromium, indium and less than 5 % tungsten. Some modifications a

57646,IS,,ISO 11210:2014,Jewellery — Determination of platinum in platinum jewellery alloys — Gravimetric method after precipitation of diammonium hexachloroplatinate,"Joaillerie, bijouterie — Dosage du platine dans les alliages de platine pour la bijouterie-joaillerie — Méthode gravimétrique après précipitation de l'hexachloroplatinate de diammonium",2014-11-20,2,['39.060'],ISO/TC 174,9599,[19199],[81399],"['en','fr']",6,"<p>ISO 11210:2014 specifies a gravimetric method for the determination of platinum in platinum jewellery alloys, preferably within the range of fineness stated in ISO 9202.</p><p>These alloys can contain palladium, iridium, rhodium, copper, cobalt, gold, ruthenium, gallium

19207,IS,,ISO 11218:1993,Aerospace — Cleanliness classification for hydraulic fluids,Aéronautique et espace — Classes de propreté des fluides hydrauliques,1993-05-13,1,['49.080'],ISO/TC 20/SC 10,9599,,"[68318,44528]","['en','fr']",1,"<p>Requirements are specified in SAE AS4059A which is adopted as a de facto ISO international Standard. For the purposes of international standardization, the outlined modification shall apply to the specific clause of AS4059A.</p>"

5648,IS,,ISO 1122-1:1983,Glossary of gear terms — Part 1: Geometrical definitions,Vocabulaire des engrenages — Partie 1: Définitions géométriques,1983-02-01,1,"['21.200','01.040.21']",ISO/TC 60,9599,[5647],[5649],"['en','fr']",34,

19212,IS,,ISO 11223-1:1995,Petroleum and liquid petroleum products — Direct static measurements — Contents of vertical storage tanks — Part 1: Mass measurement by hydrostatic tank gauging,Pétrole et produits pétroliers liquides — Mesurage statique direct — Contenu des réservoirs verticaux de stockage — Partie 1: Mesurage de masse par jaugeage hydrostatique des réservoirs,1995-09-28,1,['75.180.30'],ISO/TC 28,9599,,[37085],"['en','fr']",19,"<p>Gives guidance on the installation, commissioning, maintenance, validation and calibration of hydrostatic tank gauging systems for the direct measurement of static mass in petroleum storage tanks.</p>"

19213,IS,,ISO 11224:1993,Textiles — Nonwovens — Web formation and bonding — Vocabulary,Textiles — Nontissés — Vocabulaire pour la formation et l'assemblage du voile,1993-10-28,1,"['59.080.30','01.040.59']",ISO/TC 38,9599,,[23754],['en'],2,"<p>Defines, in English, 11 terms for the processing of nonwovens, and 20 terms applied to the resulting product.</p>"

26520,IS,,ISO 11228-1:2003,Ergonomics — Manual handling — Part 1: Lifting and carrying,Ergonomie — Manutention manuelle — Partie 1: Manutention verticale et manutention horizontale,2003-05-20,1,['13.180'],ISO/TC 159/SC 3,9599,,"[67133,76820]","['en','fr','ru']",23,"<p>ISO 11228-1:2003 specifies recommended limits for manual lifting and carrying while taking into account, respectively, the intensity, the frequency and the duration of the task. ISO 11228:2003 is designed to provide guidance on the assessment of several task variables, allowing the health risks for the working population to be evaluated. </p><p>ISO 11228-1:2003 applies to manual handling of objects with a mass of 3 kg or more.<

26522,IS,,ISO 11228-3:2007,Ergonomics — Manual handling — Part 3: Handling of low loads at high frequency,Ergonomie — Manutention manuelle — Partie 3: Manipulation de charges faibles à fréquence de répétition élevée,2007-03-30,1,['13.180'],ISO/TC 159/SC 3,9599,,[84736],"['en','fr','ru']",76,"<p>ISO 11228-3:2006 establishes ergonomic recommendations for repetitive work tasks involving the manual handling of low loads at high frequency. It provides guidance on the identification and assessment of risk factors commonly associated with handling low loads at high frequency, thereby allowing evaluation of the related health risks to the working population. The recommendations apply to the adult wo

50302,IS,,ISO 11231:2010,Space systems — Probabilistic risk assessment (PRA),Systèmes spatiaux — Évaluation du risque probabiliste (PRA),2010-07-16,1,['49.140'],ISO/TC 20/SC 14,9599,,[71599],['en'],17,"<p>ISO 11231:2010 supports and complements the implementation of the risk management process defined in ISO 17666 in situations when application of quantitative risk assessment is deemed necessary.</p><p>ISO 11231:2010 defines the principles, process, implementation and requirements for conducting a quantitative risk assessment, and explains the details of probabilistic risk assessment (PRA) as applied to safety. While PRA can be applied to project risk management involving cost and schedule,

19216,IS,,ISO 11235:1999,Rubber compounding ingredients — Sulfenamide accelerators — Test methods,Ingrédients de mélange du caoutchouc — Accélérateurs de type sulfénamide — Méthodes d'essai,1999-04-22,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[68065],"['en','fr']",22,

68065,IS,,ISO 11235:2016,Rubber compounding ingredients — Sulfenamide accelerators — Test methods,Ingrédients de mélange du caoutchouc — Accélérateurs de type sulfénamide — Méthodes d'essai,2016-01-04,2,['83.040.20'],ISO/TC 45/SC 3,9599,[19216],[84883],"['en','fr']",25,"<p>ISO 11235:2016 specifies the methods to be used for the evaluation of sulfenamide accelerators:</p><p>- MBTS: benzothiazyl disulphide;</p><p>- CBS: N-cyclohexylbenzothiazole-2-sulfenamide;</p><p>- TBBS: N-tert-butylbenzothiazole-2-sulfenamide;</p><p>- DIBS: N,N'-diisopropylbenzothiazole-2-sulfenamide;</p><p>- DCBS: N,N'-dicyclohexylbenzothiazole-2-sulfenamide;</p><p>- MBS: N-oxydiethylenebenzo

19217,IS,,ISO 11236:2000,Rubber compounding ingredients — p-Phenylenediamine (PPD) antidegradants — Test methods,Ingrédients de mélange du caoutchouc — Antidégradants du type p-phénylènediamine (PPD) — Méthodes d'essai,2000-03-23,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[70404],"['en','fr']",20,

43983,IS,Cor,ISO 11236:2000/Cor 1:2006,Rubber compounding ingredients — p-Phenylenediamine (PPD) antidegradants — Test methods — Technical Corrigendum 1,Ingrédients de mélange du caoutchouc — Antidégradants du type p-phénylènediamine (PPD) — Méthodes d'essai — Rectificatif technique 1,2006-02-13,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[70404],['en'],2,

37104,IS,,ISO 11237-1:2004,Rubber hoses and hose assemblies — Wire-braid-reinforced compact types for hydraulic applications — Specification — Part 1: Oil-based fluid applications,Tuyaux et flexibles en caoutchouc — Types hydrauliques compacts avec armature de fils métalliques — Spécifications — Partie 1: Applications pour fluides à base d'huile,2004-01-07,1,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,,[53383],['en'],8,"<p>ISO 11237-1:2004 specifies requirements for three types of wire-braid-reinforced compact hose and hose assembly of nominal bore from 6,3 to 31,5. They are suitable for use with hydraulic fluids HH, HL, HM, HR and HV in accordance with ISO 6743-4 at temperatures ranging

37165,IS,,ISO 11237-2:2006,Rubber hoses and hose assemblies — Wire-braid-reinforced compact types for hydraulic applications — Specification — Part 2: Water-based fluid applications,Tuyaux et flexibles en caoutchouc — Types hydrauliques compacts avec armature de fils métalliques — Spécifications — Partie 2: Applications pour fluides à base d'eau,2006-02-03,1,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,,[53383],['en'],11,"<p>ISO 11237-2:2006 specifies requirements for four types of compact wire-braid-reinforced hoses and hose assemblies of nominal size from 5 to 31,5. They are suitable for use with hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging f

53383,IS,,ISO 11237:2010,Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification,Tuyaux et flexibles en caoutchouc — Types hydrauliques compacts avec armature de fils métalliques tressés pour fluides à base d'huile ou à base d'eau — Spécifications,2010-04-08,1,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,"[37165,50794,37104,50795]",[70374],['en'],12,"<p>ISO 11237:2010 specifies requirements for five types of compact, wire-braid-reinforced hose and hose assembly of nominal size from 5 to 31,5. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatur

70374,IS,,ISO 11237:2017,Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification,Tuyaux et flexibles en caoutchouc — Types hydrauliques compacts avec armature de fils métalliques tressés pour fluides à base d'huile ou à base d'eau — Spécifications,2017-10-02,2,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[53383],[86392],['en'],11,"<p>ISO 11237 specifies requirements for five types of compact, wire-braid-reinforced hose and hose assembly of nominal size from 5 to 31,5.</p><p>They are suitable for use with</p><p>- oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging

55031,IS,,ISO 11238:2012,Health informatics — Identification of medicinal products — Data elements and structures for the unique identification and exchange of regulated information on substances,Informatique de santé — Identification des médicaments — Éléments de données et structures pour l'identification unique et l'échange d'informations réglementées sur les substances,2012-10-26,1,['35.240.80'],ISO/TC 215,9599,,[69697],"['en','fr']",41,

55032,IS,,ISO 11239:2012,"Health informatics — Identification of medicinal products — Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging","Informatique de santé — Identification des médicaments — Éléments de données et structures pour l'identification unique et l'échange d'informations réglementées sur les formes des doses pharmaceutiques, les unités de présentation, les voies d'administration et les emballages",2012-10-26,1,['35.240.80'],ISO/TC 215,9599,,"[70595,81133]","['en','fr']",28,"<p>ISO 11239:2012 specifies:</p><p>· the structures and rela

5652,IS,,ISO 1124:1983,Rubber compounding ingredients — Carbon black — Sampling shipments in bulk or in bins,Ingrédients de mélange du caoutchouc — Noir de carbone — Chargement d'échantillons en vrac ou en conteneurs rigides ou souples,1983-04-01,2,['83.040.20'],ISO/TC 45,9599,,[5653],"['en','fr']",1,

19224,IS,,ISO 11243:1994,"Cycles — Luggage carriers for bicycles — Concepts, classification and testing","Cycles — Porte-bagages pour bicyclettes — Conception, classification et essais",1994-09-29,1,['43.150'],ISO/TC 149/SC 1,9599,,[61238],"['en','fr']",5,<p>Specifies dimensions and performance requirements for luggage carriers intended for mounting above the rear wheels of bicycles.</p>

61238,IS,,ISO 11243:2016,Cycles — Luggage carriers for bicycles — Requirements and test methods,Cycles — Porte-bagages pour bicyclettes — Exigences et méthodes,2016-06-10,2,['43.150'],ISO/TC 149/SC 1,9599,[19224],[76359],"['en','fr']",20,"<p>ISO 11243:2016 specifies safety and performance requirements for the design and testing of luggage carriers intended for mounting (with or without tool) above and adjacent to the wheels of cycles and lays down guide lines for instructions on the use and care of such luggage carriers.</p><p>It does not apply to removable luggage (for example, handlebar bags or baskets that are not permanently attached).</p><p>Toy carrier intended to be mounted on bicycles

19225,IS,,ISO 11244:1998,Dental brazing investments,Revêtements dentaires pour le brasage,1998-09-24,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[37646],"['en','fr']",10,

19226,IS,,ISO 11245:1999,Dental restorations — Phosphate-bonded refractory die materials,Restaurations dentaires — Produits pour modèles réfractaires à liant phosphate,1999-03-11,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[37646],"['en','fr']",11,

19227,IS,,ISO 11246:1996,Dental ethyl silicate bonded casting investments,Revêtements dentaires pour coulées à liant silicate d'éthyle,1996-06-13,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[37646],"['en','fr']",5,<p>Describes a method for the assessment of the efficacy of ethyl silicate bonded casting investments used for dental casting alloy restorations. Specifies requirements for the essential physical properties and methods for their determination.</p>

64612,IS,,ISO 11249:2018,"Copper-bearing intrauterine contraceptive devices — Guidance on the design, execution, analysis and interpretation of clinical studies","Dispositif intra-utérin au cuivre à but contraceptif — Recommandations relatives à la méthodologie, la réalisation, l'analyse et l'interprétation des résultats des études cliniques",2018-02-01,1,['11.200'],ISO/TC 157,9599,,[90476],['en'],23,"<p>ISO 11249:2018 provides guidance on the design and conduct of clinical studies to determine the performance characteristics of new intrauterine devices. It also provides advice on the analysis of data when the study is completed, as well as interpretation of these results by manufacturers, r

5654,IS,,ISO 1125:1974,Carbon black for the rubber industry — Determination of ash content,Noir de carbone pour l'industrie des élastomères — Détermination de la teneur en cendres,1974-11-01,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[5655],"['en','fr']",1,

5655,IS,,ISO 1125:1990,Rubber compounding ingredients — Carbon black — Determination of ash content,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la teneur en cendres,1990-11-29,2,['83.040.20'],ISO/TC 45/SC 3,9599,[5654],[27008],"['en','fr']",2,

27008,IS,,ISO 1125:1999,Rubber compounding ingredients — Carbon black — Determination of ash,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du taux de cendres,1999-03-18,3,['83.040.20'],ISO/TC 45/SC 3,9599,[5655],[68062],"['en','fr']",4,

55611,IS,Amd,ISO 1125:1999/Amd 1:2011,Rubber compounding ingredients — Carbon black — Determination of ash — Amendment 1: Insertion of additional item in test report,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du taux de cendres — Amendement 1: Ajout d'un élément supplémentaire dans le rapport d'essai,2011-05-12,3,['83.040.20'],ISO/TC 45/SC 3,9599,,[68062],"['en','fr']",1,

19230,IS,,ISO 11252:1993,Lasers and laser-related equipment — Laser device — Minimum requirements for documentation,Lasers et équipements associés aux lasers — Source laser — Exigences minimales pour la documentation,1993-09-16,1,['31.260'],ISO/TC 172/SC 9,9599,,[34199],"['en','fr']",3,<p>Specifies the minimum documentation and marking and labelling information requirements to be provided with laser devices. The documentation is presented on two levels: as a technical data sheet and as an instruction manual. Does not apply to laser products which incorporate laser devices.</p>

34199,IS,,ISO 11252:2004,Lasers and laser-related equipment — Laser device — Minimum requirements for documentation,Lasers et équipements associés aux lasers — Source laser — Exigences minimales pour la documentation,2004-11-12,2,['31.260'],ISO/TC 172/SC 9,9599,[19230],[52078],"['en','fr']",9,"<p>ISO 11252:2004 specifies the minimum documentation and information for marking and labelling, to be provided with laser devices (including laser diodes).</p><p>The documentation is presented on two levels: as a technical data sheet and as an instruction manual.</p><p>The standard does not apply to laser products which incorporate laser devices.</p><p>It also does not apply to laser devices manufactu

19232,IS,,ISO 11254-1:2000,Lasers and laser-related equipment — Determination of laser-induced damage threshold of optical surfaces — Part 1: 1-on-1 test,Lasers et équipements associés aux lasers — Détermination du seuil d'endommagement provoqué par laser sur les surfaces optiques — Partie 1: Essai 1 sur 1,2000-06-08,1,['31.260'],ISO/TC 172/SC 9,9599,,"[43002,43001]","['en','fr']",23,

21142,IS,,ISO 11254-2:2001,Lasers and laser-related equipment — Determination of laser-induced damage threshold of optical surfaces — Part 2: S-on-1 test,Lasers et équipements associés aux lasers — Détermination du seuil d'endommagement provoqué par laser sur les surfaces optiques — Partie 2: Essai S sur 1,2001-09-27,1,['31.260'],ISO/TC 172/SC 9,9599,,"[43002,43001]","['en','fr']",28,

41097,IS,,ISO 11254-3:2006,Lasers and laser-related equipment — Determination of laser-induced damage threshold of optical surfaces — Part 3: Assurance of laser power (energy) handling capabilities,Lasers et équipements associés aux lasers — Détermination du seuil d'endommagement provoqué par laser sur les surfaces optiques — Partie 3: Vérification de la capacité à supporter la puissance (l'énergie) laser,2006-08-25,1,['31.260'],ISO/TC 172/SC 9,9599,,[43003],"['en','fr']",22,"<p>ISO 11254-3:2006 describes a test procedure for assurance of power density (energy density) handling capability of optical surfaces, both coated and uncoated.</p><p>ISO 11254-3:2006 specifies this procedure by provid

19234,IS,,ISO 11256:1998,Iron ore pellets — Determination of clustering of feedstock for direct reduction by gas reforming processes,Boulettes de minerais de fer — Détermination du pouvoir collant des charges utilisées dans les procédés de reforming par réduction directe,1998-10-22,1,['73.060.10'],ISO/TC 102/SC 3,9599,,[38100],['en'],12,

38100,IS,,ISO 11256:2007,Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index,Boulettes de minerais de fer pour charges utilisées dans les procédés par réduction directe — Détermination du pouvoir collant,2007-10-30,2,['73.060.10'],ISO/TC 102/SC 3,9599,[19234],[62144],['en'],13,<p>ISO 11256:2007 specifies a method to provide a relative measure for evaluating the formation of clusters of iron ore pellets when reduced under conditions resembling those prevailing in shaft direct-reduction processes.</p><p>ISO 11256:2007 is applicable to hot-bonded pellets.</p>

19235,IS,,ISO 11257:1998,Iron ores — Determination of disintegration and metallization of feedstock for direct reduction by gas reforming processes,Minerais de fer — Détermination de la dégradation et de la métallisation des charges utilisées dans les procédés de reforming par réduction directe,1998-07-09,1,['73.060.10'],ISO/TC 102/SC 3,9599,,[38099],['en'],8,

38099,IS,,ISO 11257:2007,Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization,Minerais de fer pour charges utilisées dans les procédés par réduction directe — Détermination de l'indice de désintégration par réduction à basse température et du degré de métallisation,2007-10-31,2,['73.060.10'],ISO/TC 102/SC 3,9599,[19235],[62139],['en'],8,"<p>ISO 11257:2007 specifies a method to provide a relative measure for evaluating the degree of size degradation and degree of metallization of iron ores, when reduced under conditions resembling those prevailing in shaft direct-reduction processes.</p><p>ISO 11257:2

62139,IS,,ISO 11257:2015,Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization,Minerais de fer pour charges utilisées dans les procédés par réduction directe — Détermination de l'indice de désintégration par réduction à basse température et du degré de métallisation,2015-08-17,3,['73.060.10'],ISO/TC 102/SC 3,9599,[38099],[82820],['en'],9,"<p>ISO 11257:2015 specifies a method to provide a relative measure for evaluating the degree of size degradation and degree of metallization of iron ores, when reduced under conditions resembling those prevailing in shaft direct-reduction processes.</p><p>ISO 11257:2

19236,IS,,ISO 11258:1999,Iron ores — Determination of reducibility and metallization of feedstock for direct reduction by gas reforming processes,Minerais de fer — Détermination de la réductibilité et de la métallisation des charges utilisées dans les procédés de reforming par réduction directe,1999-08-12,1,['73.060.10'],ISO/TC 102/SC 3,9599,,[38098],['en'],14,

38098,IS,,ISO 11258:2007,"Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization","Minerais de fer pour charges utilisées dans les procédés par réduction directe — Détermination de l'indice de réductibilité, du degré final de réduction et du degré de métallisation",2007-10-30,2,['73.060.10'],ISO/TC 102/SC 3,9599,[19236],[62145],['en'],15,"<p>ISO 11258:2007 specifies a method to provide a relative measure for evaluating the extent and ease to which oxygen can be removed from iron ores, when reduced under conditions resembling those prevailing in shaft direct-reduction processes. It specifies the determin

19237,IS,,ISO 11259:1998,Soil quality — Simplified soil description,Qualité du sol — Description simplifiée du sol,1998-03-05,1,['13.080.01'],ISO/TC 190,9599,,"[36068,42783]","['en','fr']",39,

5656,IS,,ISO 1126:1974,Carbon black for use in the rubber industry — Determination of loss on heating,Noir de carbone pour l'industrie des élastomères — Détermination de la perte à la chaleur,1974-03-01,1,['83.040.20'],ISO/TC 45,9599,,"[5657,5658]","['en','fr']",1,

5657,IS,,ISO 1126:1985,Rubber compounding ingredients — Carbon black — Determination of loss on heating,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la perte à la chaleur,1985-05-02,2,['83.040.20'],ISO/TC 45/SC 3,9599,[5656],[5658],"['en','fr']",1,

5658,IS,,ISO 1126:1992,Rubber compounding ingredients — Carbon black — Determination of loss on heating,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la perte à la chaleur,1992-03-05,3,['83.040.20'],ISO/TC 45/SC 3,9599,"[5656,5657]",[41278],"['en','fr']",2,"<p>Describes the principle, the apparatus, the expression of results and the contents of the test report. Does not apply to treated carbon blacks which contain added volatile materials.</p>"

41278,IS,,ISO 1126:2006,Rubber compounding ingredients — Carbon black — Determination of loss on heating,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la perte à la chaleur,2006-03-08,4,['83.040.20'],ISO/TC 45/SC 3,9599,[5658],[68063],"['en','fr']",6,"<p>ISO 1126:2006 specifies methods for determining the loss on heating of carbon black for use in the rubber industry. This loss on heating is due primarily to loss of moisture, but traces of other volatile materials may also be lost.</p><p>The methods are not applicable to treated carbon blacks which contain added volatile materials.</p><p>The following methods are described:</p><ul><li>method 1: gravity-convection

19238,IS,,ISO 11260:1994,Soil quality — Determination of effective cation exchange capacity and base saturation level using barium chloride solution,Qualité du sol — Détermination de la capacité d'échange cationique effective et du taux de saturation en bases échangeables à l'aide d'une solution de chlorure de baryum,1994-07-28,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[60566],"['en','fr']",10,"<p>Specifies a method for the determination of the cation exchange capacity (CEC) at the pH of the soil and for the determination of the content of exchangeable sodium, potassium, calcium and magnesium in soil. Is applicable to all types of air-dried soil samples; pretreatment according to ISO 11464 is re

26905,IS,Cor,ISO 11260:1994/Cor 1:1996,Soil quality — Determination of effective cation exchange capacity and base saturation level using barium chloride solution — Technical Corrigendum 1,Qualité du sol — Détermination de la capacité d'échange cationique effective et du taux de saturation en bases échangeables à l'aide d'une solution de chlorure de baryum — Rectificatif technique 1,1996-06-13,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[60566],"['en','fr']",1,<p>Replaces the existing text of the spectrometric procedure in subclause 4.2.4.</p>

36131,IS,,ISO 11262:2003,Soil quality — Determination of cyanide,Qualité du sol — Dosage des cyanures,2003-09-10,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[53737],"['en','fr']",19,"<p>ISO 11262:2003 is applicable to as-received soil samples, and specifies two quantification methods for the determination of easily released and complex cyanides. It is not always necessary to determine easily released cyanide prior to the measurement of complex cyanide. In this instance, the first part of the distillation process is omitted so that only the total cyanide is determined. The methods are applicable to soil containing between 0,5 mg/kg and 10 000 mg/kg of total cyanide. The methods and corresponding ra

19243,IS,,ISO 11265:1994,Soil quality — Determination of the specific electrical conductivity,Qualité du sol — Détermination de la conductivité électrique spécifique,1994-09-22,1,['13.080.20'],ISO/TC 190/SC 3,9599,,[85887],"['en','fr']",4,<p>Specifies an instrumental method for the routine determination of the specific electrical conductivity in an aqueous extract of soil. The determination is carried out to obtain an indication of the content of water-soluble electrolytes in a soil.</p>

26684,IS,Cor,ISO 11265:1994/Cor 1:1996,Soil quality — Determination of the specific electrical conductivity — Technical Corrigendum 1,Qualité du sol — Détermination de la conductivité électrique spécifique — Rectificatif technique 1,1996-10-17,1,['13.080.20'],ISO/TC 190/SC 3,9599,,[85887],"['en','fr']",2,

19245,IS,,ISO 11267:1999,Soil quality — Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants,Qualité du sol — Inhibition de la reproduction de Collembola (Folsomia candida) par des polluants du sol,1999-04-15,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[57582],"['en','fr']",16,

57582,IS,,ISO 11267:2014,Soil quality — Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants,Qualité du sol — Inhibition de la reproduction de Collembola (Folsomia candida) par des contaminants du sol,2014-02-06,2,['13.080.30'],ISO/TC 190/SC 4,9599,[19245],[79816],"['en','fr']",19,"<p>ISO 11267:2014 specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of <i>Folsomia candida</i> Willem by dermal and alimentary uptake. This chronic test is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation,

19246,IS,,ISO 11268-1:1993,Soil quality — Effects of pollutants on earthworms (Eisenia fetida) — Part 1: Determination of acute toxicity using artificial soil substrate,Qualité du sol — Effets des polluants vis-à-vis des vers de terre (Eisenia fetida) — Partie 1: Détermination de la toxicité aiguë en utilisant des substrats de sol artificiel,1993-12-16,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[53527],"['en','fr']",6,"<p>The method described is based on placing adult earthworms in a defined substrate containing the test substance in different concentrations and determining the percent mortality after 7 d and 14 d. It is not applicable to volatile substances, i.e. substances for which Henry's con

20993,IS,,ISO 11268-2:1998,Soil quality — Effects of pollutants on earthworms (Eisenia fetida) — Part 2: Determination of effects on reproduction,Qualité du sol — Effets des polluants vis-à-vis des vers de terre (Eisenia fetida) — Partie 2: Détermination des effets sur la reproduction,1998-07-02,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[53528],"['en','fr']",16,

53528,IS,,ISO 11268-2:2012,Soil quality — Effects of pollutants on earthworms — Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei,Qualité du sol — Effets des polluants vis-à-vis des vers de terre — Partie 2: Détermination des effets sur la reproduction de Eisenia fetida/Eisenia andrei,2012-10-29,2,['13.080.30'],ISO/TC 190/SC 4,9599,[20993],[79045],"['en','fr']",21,"<p>ISO 11268-2:2012 specifies one of the methods for evaluating the habitat function of soils and determining the effects of soil contaminants and chemicals on the reproduction of <i>Eisenia fetida/Eisenia andrei</i> by dermal and alimentary uptake. This chronic test is applicable to soils and soil

22764,IS,,ISO 11268-3:1999,Soil quality — Effects of pollutants on earthworms — Part 3: Guidance on the determination of effects in field situations,Qualité du sol — Effets des polluants vis-à-vis des vers de terre — Partie 3: Lignes directrices relatives à la détermination des effets sur site,1999-04-01,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[57583],"['en','fr']",8,

19247,IS,,ISO 11269-1:1993,Soil quality — Determination of the effects of pollutants on soil flora — Part 1: Method for the measurement of inhibition of root growth,Qualité du sol — Détermination des effets des polluants sur la flore du sol — Partie 1: Méthode de mesurage de l'inhibition de la croissance des racines,1993-11-18,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[51388],"['en','fr']",9,"<p>Describes a preliminary test for the rapid estimation of soil quality by comparing the growth of roots of a specified plant under standard conditions with that in a test soil. The method is applicable to all soils, soil forming materials, waste residues or chemicals which may be applied to soil, except w

22315,IS,,ISO 11269-2:1995,Soil quality — Determination of the effects of pollutants on soil flora — Part 2: Effects of chemicals on the emergence and growth of higher plants,Qualité du sol — Détermination des effets des polluants sur la flore du sol — Partie 2: Effets des substances chimiques sur l'émergence et la croissance des végétaux supérieurs,1995-12-07,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[36425],"['en','fr']",7,<p>Describes a method for the determination of possible toxic effects of solid or liquid chemicals incorporated in soil on the early stages of growth and development of a variety of terrestrial plants. Does not give an indication of damages resulting from direct contact of s

36425,IS,,ISO 11269-2:2005,Soil quality — Determination of the effects of pollutants on soil flora — Part 2: Effects of chemicals on the emergence and growth of higher plants,Qualité du sol — Détermination des effets des polluants sur la flore du sol — Partie 2: Effets des substances chimiques sur l'émergence et la croissance des végétaux supérieurs,2005-10-31,2,['13.080.30'],ISO/TC 190/SC 4,9599,[22315],[51382],"['en','fr']",11,<p>ISO 11269-2:2005 describes a method that is applicable to the determination of possible toxic effects of solid or liquid chemicals incorporated in soil on the emergence and early stages of growth and development of a variety of terrestrial plants. It does not give

5659,IS,,ISO 1127:1980,"Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length","Tubes en acier inoxydable — Dimensions, tolérances et masses linéiques conventionnelles",1980-03-01,2,['23.040.10'],ISO/TC 5/SC 1,9599,,[5660],"['en','fr']",3,

34002,IS,,ISO 11271:2002,Soil quality — Determination of redox potential — Field method,Qualité du sol — Détermination du potentiel d'oxydoréduction — Méthode de terrain,2002-10-17,1,['13.080.20'],ISO/TC 190/SC 3,9599,,[83962],"['en','fr']",12,<p>ISO 11271:2002 specifies a field method for the determination of soil redox potential (<i>E</i>_h).</p><p>NOTE The electrochemical measurement of redox potential described here is possible only if the relevant soil horizon has a moisture status defined as fresh or wetter according to the classes presented in annex D.</p>

19250,IS,,ISO 11272:1998,Soil quality — Determination of dry bulk density,Qualité du sol — Détermination de la masse volumique apparente sèche,1998-07-02,1,['13.080.20'],ISO/TC 190,9599,,[68255],"['en','fr']",10,

19252,IS,,ISO 11274:1998,Soil quality — Determination of the water-retention characteristic — Laboratory methods,Qualité du sol — Détermination de la caractéristique de la rétention en eau — Méthodes de laboratoire,1998-06-18,1,['13.080.40'],ISO/TC 190/SC 3,9599,,[68256],"['en','fr']",20,

54670,IS,Cor,ISO 11274:1998/Cor 1:2009,Soil quality — Determination of the water-retention characteristic — Laboratory methods — Technical Corrigendum 1,Qualité du sol — Détermination de la caractéristique de la rétention en eau — Méthodes de laboratoire — Rectificatif technique 1,2009-07-24,1,['13.080.40'],ISO/TC 190,9599,,[68256],"['en','fr']",2,

19255,IS,,ISO 11277:1998,Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation,Qualité du sol — Détermination de la répartition granulométrique de la matière minérale des sols — Méthode par tamisage et sédimentation,1998-05-14,1,['13.080.20'],ISO/TC 190,9599,,[54151],"['en','fr']",30,

36291,IS,Cor,ISO 11277:1998/Cor 1:2002,Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation — Technical Corrigendum 1,Qualité du sol — Détermination de la répartition granulométrique de la matière minérale des sols — Méthode par tamisage et sédimentation — Rectificatif technique 1,2002-02-28,1,['13.080.20'],ISO/TC 190,9599,,[54151],"['en','fr']",2,

54151,IS,,ISO 11277:2009,Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation,Qualité du sol — Détermination de la répartition granulométrique de la matière minérale des sols — Méthode par tamisage et sédimentation,2009-09-16,2,['13.080.20'],ISO/TC 190/SC 3,9599,"[36291,19255]",[69496],"['en','fr']",34,"<p>ISO 11277:2009 specifies a basic method of determining the particle size distribution applicable to a wide range of mineral soil materials, including the mineral fraction of organic soils. It also offers procedures to deal with less common soils. ISO 11277:2009 has been developed largely for use in the field of environmen

19264,IS,,ISO 11286:1997,Tea — Classification of grades by particle size analysis,Thé — Classification par catégories par analyse granulométrique,1997-11-13,1,['67.140.10'],ISO/TC 34/SC 8,9599,,[39605],"['en','fr']",4,

19268,IS,,ISO 11290-1:1996,Microbiology of food and animal feeding stuffs — Horizontal method for the detection and enumeration of Listeria monocytogenes — Part 1: Detection method,Microbiologie des aliments — Méthode horizontale pour la recherche et le dénombrement de Listeria monocytogenes — Partie 1: Méthode de recherche,1996-12-05,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[60313],"['en','fr']",16,<p>Specifies a horizontal method for the detection of Listeria monocytogenes. Applicable to products intended for human consumption or as animal feeding stuffs.</p>

35332,IS,Amd,ISO 11290-1:1996/Amd 1:2004,"Microbiology of food and animal feeding stuffs — Horizontal method for the detection and enumeration of Listeria monocytogenes — Part 1: Detection method — Amendment 1: Modification of the isolation media and the haemolysis test, and inclusion of precision data","Microbiologie des aliments — Méthode horizontale pour la recherche et le dénombrement de Listeria monocytogenes — Partie 1: Méthode de recherche — Amendement 1: Modification des milieux d'isolement, de la recherche de l'hémolyse et introduction de données de fidélité",2004-10-01,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[60313],"['en','fr']",13,

25570,IS,,ISO 11290-2:1998,Microbiology of food and animal feeding stuffs — Horizontal method for the detection and enumeration of Listeria monocytogenes — Part 2: Enumeration method,Microbiologie des aliments — Méthode horizontale pour la recherche et le dénombrement de Listeria monocytogenes — Partie 2: Méthode de dénombrement,1998-06-11,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[60314],"['en','fr']",20,

36146,IS,Amd,ISO 11290-2:1998/Amd 1:2004,Microbiology of food and animal feeding stuffs — Horizontal method for the detection and enumeration of Listeria monocytogenes — Part 2: Enumeration method — Amendment 1: Modification of the enumeration medium,Microbiologie des aliments — Méthode horizontale pour la recherche et le dénombrement de Listeria monocytogenes — Partie 2: Méthode de dénombrement — Amendement 1: Modification du milieu d'isolement,2004-10-01,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[60314],"['en','fr']",4,