Withdrawn and superseded ISO standards — page 171 of 246

44426,IS,,ISO 8362-5:2008,Injection containers and accessories — Part 5: Freeze drying closures for injection vials,Récipients et accessoires pour produits injectables — Partie 5: Bouchons à lyophilisation pour flacons d'injection,2008-10-08,2,['11.040.20'],ISO/TC 76,9599,[15516],[65448],"['en','fr']",9,"<p>ISO 8362-5:2008 specifies the shape, dimensions, material, performance requirements and labelling for the type of closure for injection vials, as described in ISO 8362-1 and ISO 8362-4, which is used in connection with the freeze drying (or lyophilization) of drugs and biological materials.</p><p>Closures specified in ISO 8362-5:2008 are intended for single use only.</p>"

15517,IS,,ISO 8362-6:1992,Injection containers for injectables and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials,Récipients et accessoires pour produits injectables — Partie 6: Capsules en combinaison aluminium-plastique pour flacons d'injection,1992-09-24,1,['11.040.20'],ISO/TC 76,9599,,[52806],"['en','fr']",3,"<p>Specifies classification of types, dimensions and tolerances, designation, requirements, packaging, and marking.</p>"

20871,IS,,ISO 8362-7:1995,Injection containers for injectables and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part,Récipients et accessoires pour produits injectables — Partie 7: Capsules d'injection en combinaison aluminium-plastique avec élément plastique non débordant,1995-10-12,1,['11.040.20'],ISO/TC 76,9599,,[43551],"['en','fr']",4,<p>Relates to aluminium-plastics combinations for the injection caps of injection vials where the plastics part does not overlap the diameter of the vial body.</p>

15518,IS,,ISO 8363:1986,Liquid flow measurement in open channels — General guidelines for the selection of methods,Mesure de débit des liquides dans les canaux découverts — Principes directeurs généraux pour le choix d'une méthode,1986-10-30,1,['17.120.20'],ISO/TC 113/SC 1,9599,,[28929],"['en','fr']",6,

15519,IS,,ISO 8364:1985,Alpine skis and bindings — Binding mounting area — Requirements and test methods,Skis et fixations de ski alpin — Zone de montage de la fixation — Exigences de tenue et méthodes d'essai,1985-07-11,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[15520],"['en','fr']",,

15520,IS,,ISO 8364:1991,Alpine skis and bindings — Binding mounting area — Requirements and test methods,Skis et fixations de skis alpins — Zone de montage de la fixation — Exigences de tenue et méthodes d'essai,1991-10-10,2,['97.220.20'],ISO/TC 83/SC 4,9599,"[12571,12572,12205,15519,11153]",[25999],"['en','fr']",7,

25999,IS,,ISO 8364:1999,Alpine skis and bindings — Binding mounting area — Requirements and test methods,Skis et fixations des skis alpins — Zone de montage de la fixation — Exigences de tenue et méthodes d'essai,1999-10-07,3,['97.220.20'],ISO/TC 83/SC 4,9599,[15520],[39899],"['en','fr']",11,

39899,IS,,ISO 8364:2007,Alpine skis and bindings — Binding mounting area — Requirements and test methods,Skis et fixations de skis alpins — Zone de montage de la fixation — Exigences de tenue et méthodes d'essai,2007-03-13,4,['97.220.20'],ISO/TC 83/SC 4,9599,[25999],[71934],"['en','fr']",13,"<p>ISO 8364:2007 specifies requirements and test methods for the binding mounting area and free space area, ski bindings and retention devices of alpine skis, in order to optimize the compatibility of the functional unit 'ski binding - retention device - boot'.</p><p>It contains data for the manufacturer of alpine skis, bindings and retention devices, concerning dimensions, tests and other specifications

15522,IS,,ISO 8366:1987,Coated abrasive products — Dimensional tolerances on non-standard conversions,Produits abrasifs appliqués — Tolérances dimensionnelles sur les produits convertis non normalisés,1987-07-16,1,['25.100.70'],ISO/TC 29/SC 5,9599,,[33697],"['en','fr']",2,"<p>Lays down the dimensional tolerances on non-standard discs, belts and other cross-sections for coated abrasive products. The dimensional tolerances on standardized products are specified in ISO 1929, ISO 2235 and ISO 3017. Contains a graph for reading of tolerances on other cross-sections and gives the measurement conditions.</p>"

15523,IS,,ISO 8367-1:1993,Packaging — Dimensional tolerances for general purpose sacks — Part 1: Paper sacks,Emballages — Tolérances dimensionnelles des sacs d'usage général — Partie 1: Sacs en papier,1993-12-23,1,['55.080'],ISO/TC 122/SC 3,9599,,[92310],"['en','fr']",2,"<p>The tolerances of the following dimensions of paper sacks as defined in ISO 6590-1 are specified: ply grammage, length of sack, width of sack, width of gusset, circumference of sack with gussets, width of bottom, width of valve, position of the leading edge of the valve sleeve, print position on sack.</p>"

15524,IS,,ISO 8368:1985,Liquid flow measurement in open channels — Guidelines for the selection of flow gauging structures,Mesure de débit des liquides dans les canaux découverts — Principes directeurs pour le choix d'un dispositif de jaugeage,1985-10-24,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[15525],"['en','fr']",5,

15525,IS,,ISO 8368:1999,Hydrometric determinations — Flow measurements in open channels using structures — Guidelines for selection of structure,Déterminations hydrométriques — Mesure de débit dans les canaux découverts au moyen de structures — Lignes directrices pour le choix des structures,1999-04-15,2,['17.120.20'],ISO/TC 113/SC 2,9599,[15524],[67996],['en'],11,

15527,IS,,ISO 8370:1987,V- and ribbed V-belts — Dynamic test to determine pitch zone location,Courroies trapézoïdales et striées — Méthode d'essai dynamique de détermination de l'emplacement de la zone primitive,1987-12-17,1,['21.220.10'],ISO/TC 41/SC 1,9599,,[21257],"['en','fr']",2,

15529,IS,,ISO 8371:1994,Iron ores — Determination of decrepitation index,Minerais de fer — Détermination de l'indice de décrépitation,1994-11-17,1,['73.060.10'],ISO/TC 102/SC 3,9599,,[38072],"['en','fr']",2,<p>Specifies a method for the determination of the decrepitation index of lump iron ore.</p>

38072,IS,,ISO 8371:2007,Iron ores for blast furnace feedstocks — Determination of the decrepitation index,Minerais de fer pour charges de hauts fourneaux — Détermination de l'indice de décrépitation,2007-11-19,2,['73.060.10'],ISO/TC 102/SC 3,9599,[15529],[62138],"['en','ru']",4,<p>ISO 8371:2007 specifies a method to provide a relative measure for evaluating the degree of size degradation caused by rapid heating of iron ores. It specifies the determination of the decrepitation index.</p><p>ISO 8371:2007 is applicable to lump ores for blast furnace feedstocks.</p>

62138,IS,,ISO 8371:2015,Iron ores for blast furnace feedstocks — Determination of the decrepitation index,Minerais de fer pour charges de hauts fourneaux — Détermination de l'indice de décrépitation,2015-08-05,3,['73.060.10'],ISO/TC 102/SC 3,9599,[38072],[80110],['en'],5,<p>ISO 8371:2015 specifies a method to provide a relative measure for evaluating the degree of size degradation caused by rapid heating of iron ores. It specifies the determination of the decrepitation index.</p><p>ISO 8371:2015 is applicable to lump ores for blast furnace feedstocks.</p>

15532,IS,,ISO 8373:1994,Manipulating industrial robots — Vocabulary,Robots manipulateurs industriels — Vocabulaire,1994-11-24,1,"['25.040.30','01.040.25']",ISO/TC 184,9599,,[55890],"['en','fr']",23,<p>Defines terms relevant to manipulating industrial robots operated in a manufacturing environment.</p>

25952,IS,Amd,ISO 8373:1994/Amd 1:1996,Manipulating industrial robots — Vocabulary — Amendment 1: Annex B — Multilingual annex,Robots manipulateurs industriels — Vocabulaire — Amendement 1: Annexe B — Annexe multilingue,1996-05-09,1,"['25.040.30','01.040.25']",ISO/TC 184,9599,,[55890],"['en','fr']",21,"<p>Provides a second annex to ISO 8373-1994 and gives the equivalent terms in German, Italian, Japanese, Spanish and Swedish language.</p>"

26798,IS,Cor,ISO 8373:1994/Cor 1:1996,Manipulating industrial robots — Vocabulary — Technical Corrigendum 1,Robots manipulateurs industriels — Vocabulaire — Rectificatif technique 1,1996-07-04,1,"['25.040.30','01.040.25']",ISO/TC 184,9599,,[55890],"['en','fr']",2,

55890,IS,,ISO 8373:2012,Robots and robotic devices — Vocabulary,Robots et composants robotiques — Vocabulaire,2012-02-24,2,"['25.040.30','01.040.25']",ISO/TC 299,9599,"[15532,26798,25952]",[75539],"['en','fr']",38,<p>ISO 8373:2012 defines terms used in relation with robots and robotic devices operating in both industrial and non-industrial environments.</p>

15534,IS,,ISO 8374:1986,Photography — Determination of ISO safelight conditions,Photographie — Détermination de l'éclairage inactinique ISO,1986-12-18,1,['37.040.20'],ISO/TC 42,9599,,[15535],"['en','fr']",6,"<p>Specifies the method of test for determining the condition for handling sensitized material, which is defined as that condition which provides less than half the maximum safelight exposure which can be given to sensitized material without producing a detectable change in the final image.</p>"

15536,IS,,ISO 8375:1985,Solid timber in structural sizes — Determination of some physical and mechanical properties,Bois massif en dimensions d'emploi — Détermination de certaines propriétés physiques et mécaniques,1985-06-27,1,['91.080.20'],ISO/TC 165,9599,,[40958],"['en','fr']",10,"<p>Laboratory methods are specified for determining the modulus of elasticity in static bending, shear modulus, bending strength, modulus of elasticity in tension, tension strength parallel to the grain, modulus of elasticity in compression, compression strength parallel to the grain and dimensions, moisture content, and density. The methods apply to rectangular and square sections of solid unjointed timber or f

40958,IS,,ISO 8375:2009,Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties,Structures en bois — Bois lamellé-collé — Méthodes d'essai pour la détermination de certaines propriétés physiques et mécaniques,2009-01-28,2,['91.080.20'],ISO/TC 165,9599,[15536],[67532],"['en','fr']",28,"<p>ISO 8375:2009 specifies test methods for determining the following characteristic values of glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength; modulus of elasticity in tension parallel to the grain; tension strength parallel to the grain; modulus of elasticity in compression parallel to the grain; compression st

15542,IS,,ISO 8378-3:1986,"Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides — Part 3: Track format B","Traitement de l'information — Échange de données sur cartouches à disquette de 130 mm (5,25 in) utilisant un enregistrement à modulation de fréquence modifiée à 7 958 ftprad, 3,8 tpmm (96 tpi), sur les deux faces — Partie 3: Schéma de piste B",1986-04-24,1,['35.220.21'],ISO/IEC JTC 1,9599,,[15543],"['en','fr']",,

15544,IS,,ISO 8379:1998,Rough terrain trucks — Stability tests,Chariots élévateurs tous terrains à fourche — Essais de stabilité,1998-06-25,1,['53.060'],ISO/TC 110/SC 2,9599,,"[44946,54418]","['en','fr']",13,

34595,IS,Amd,ISO 8379:1998/Amd 1:2001,Rough terrain trucks — Stability tests — Amendment 1,Chariots élévateurs tous terrains à fourche — Essais de stabilité — Amendement 1,2001-11-22,1,['53.060'],ISO/TC 110/SC 2,9599,,"[44946,54418]","['en','fr']",2,

15545,IS,,ISO 8380:1985,Forestry machinery — Portable brush-saws — Circular saw-blade guard — Strength,Matériel forestier — Débroussailleuses portatives — Dispositif de protection de la lame de scie circulaire — Solidité,1985-08-29,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[1788],['en'],2,

15546,IS,,ISO 8381:1987,Milk-based infant foods — Determination of fat content — Röse-Gottlieb gravimetric method (Reference method),Aliments à base de lait pour enfants en bas âge — Détermination de la teneur en matière grasse — Méthode gravimétrique Röse-Gottlieb (Méthode de référence),1987-12-10,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[27796],"['en','fr']",9,

27796,IS,,ISO 8381:2000,Milk-based infant foods — Determination of fat content — Gravimetric method (Reference method),Aliments à base de lait pour enfants en bas âge — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),2000-03-09,2,['67.100.99'],ISO/TC 34/SC 5,9599,[15546],[51016],"['en','fr']",15,

51016,IS,,ISO 8381:2008,Milk-based infant foods — Determination of fat content — Gravimetric method (Reference method),Aliments à base de lait pour enfants en bas âge — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),2008-10-02,3,['67.100.99'],ISO/TC 34/SC 5,9599,[27796],[75226],"['en','fr']",15,"<p>ISO 8381¦IDF 123:2008 specifies the reference method for the determination of the fat content of milk-based infant foods.</p><p>The method is applicable to liquid, concentrated and dried milk-based infant foods with no, or not more than a mass fraction of 5 % (dry matter) of such added matter as starch, dextrin, vegetables, fruit and meat.</p><p>The met

15547,IS,,ISO 8382:1988,Resuscitators intended for use with humans,Ressuscitateurs destinés aux êtres humains,1988-12-29,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[35975],"['en','fr']",23,"<p>Specification of minimum performance and safety requirements for small , portable, operator-powered and gas-powered ventilatory resuscitators for use in emergency situations. Electrically powered devices and such intended to assist or provide for ventilation of a patient for an extended period of time are not covered by this standard. Definitions of terms are given. The annexes contain test methods, physical parameters and a rationale statment.</p>"

15549,IS,,ISO 8384:1991,Shipbuilding and marine structures — Dredgers — Vocabulary,Construction navale et structures maritimes — Dragues — Vocabulaire,1991-05-16,1,"['01.040.47','47.060']",ISO/TC 8/SC 7,9599,,[28262],"['en','fr','ru']",18,

28262,IS,,ISO 8384:2000,Ships and marine technology — Dredgers — Vocabulary,Navires et technologie maritime — Dragues — Vocabulaire,2000-07-27,2,"['01.040.47','47.060']",ISO/TC 8/SC 7,9599,[15549],[70197],"['en','fr','ru']",43,

70197,IS,,ISO 8384:2018,Ships and marine technology — Dredgers — Vocabulary,Navires et technologie maritime — Dragues — Vocabulaire,2018-08-10,3,"['01.040.47','47.060']",ISO/TC 8/SC 7,9599,[28262],[77138],"['en','fr']",22,"<p>This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists.</p><p>This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil and rocks.</p><p>The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also

15550,IS,,ISO 8385:1990,Shipbuilding and marine structures — Dredgers — Classification,Construction navale et structures maritimes — Dragues — Classification,1990-08-09,1,['47.060'],ISO/TC 8/SC 7,9599,,[28242],"['en','fr']",5,

28242,IS,,ISO 8385:1999,Ships and marine technology — Dredgers — Classification,Navires et technologie maritime — Dragues — Classification,1999-05-20,2,['47.060'],ISO/TC 8/SC 7,9599,[15550],[70196],"['en','fr']",4,

5208,IS,,ISO 839-1:1976,Milling machine arbors with 7/24 tapers — Part 1: Dimensions,Arbres porte-fraises au cône 7/24 — Partie 1: Dimensions et désignation,1976-06-01,1,['25.060.20'],ISO/TC 29,9599,,[42233],"['en','fr']",5,"<p>Applies to a metric series type of milling machine arbors (tables in clause 4) and to a inch series type of milling machine arbors (tables in clause 5). Accessories (spacing collars, bearing collars and clamping nuts) are specified in ISO 839-2</p>"

15560,IS,,ISO 8394:1988,Building construction — Jointing products — Determination of extrudability of one-component sealants,Construction immobilière — Produits pour joints — Détermination de l'extrudabilité des mastics à un composant,1988-11-17,1,['91.100.50'],ISO/TC 59/SC 8,9599,,"[50095,50096]","['en','fr']",2,<p>Refers to sealants extruded from the packages in which they are usually supplied for direct application to a building joint. Is only to be used for testing the workability of a solvent. Is not to be used for classifying sealants.</p>

50096,IS,,ISO 8394-2:2010,Building construction — Jointing products — Part 2: Determination of extrudability of sealants using standardized apparatus,Construction immobilière — Produits pour joints — Partie 2: Détermination de l'extrudabilité des mastics au moyen d'un appareil normalisé,2010-09-15,1,['91.100.50'],ISO/TC 59/SC 8,9599,[15560],[72638],"['en','fr']",8,<p>ISO 8394-2:2010 specifies a method for determining the extrudability of sealants independently of the package in which they are supplied. It is not applicable to the classification of sealants.</p>

15563,IS,,ISO 8397:1986,Solid fertilizers and soil conditioners — Test sieving,Matières fertilisantes solides — Tamisage de contrôle,1986-11-13,1,['65.080'],ISO/TC 134,9599,,[15564],"['en','fr']",,

5210,IS,,ISO 840:1973,Withdrawal of ISO 840-1973,Annulation de l'ISO 840-1973,1973-12-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",4,

15569,IS,,ISO 8401:1986,Metallic coatings — Review of methods of measurement of ductility,Revêtements métalliques — Vue d'ensemble sur les méthodes de mesurage de la ductilité,1986-07-24,1,['25.220.40'],ISO/TC 107,9599,,"[20318,70829]","['en','fr']",31,"<p>Applies to coatings of thickness below 200 /um prepared by electroplating, autocatalytic deposition or other processes. The methods of mearuring the ductility can be divided into test on unsupported foils (the foils may consist of one or more metallic layers) and tests of coatings on substrates (with determining the exact point of crack initation of the top layers).</p>"

15570,IS,,ISO 8402:1986,Quality — Vocabulary,Qualité — Vocabulaire,1986-06-19,1,"['03.120.10','03.100.70','01.040.03']",ISO/TC 176/SC 1,9599,,[20115],"['en','fr','ru']",12,

20115,IS,,ISO 8402:1994,Quality management and quality assurance — Vocabulary,Management de la qualité et assurance de la qualité — Vocabulaire,1994-03-24,2,"['03.120.10','03.100.70','01.040.03']",ISO/TC 176/SC 1,9599,[15570],"[26842,29280]","['en','fr','ru']",39,

15572,IS,,ISO 8403:1991,Metallic coatings — Coatings anodic to the substrate — Rating of test specimens subjected to corrosion tests,Revêtements métalliques — Dépôts électrolytiques anodiques par rapport au substrat — Cotation des éprouvettes soumises aux essais de corrosion,1991-10-17,1,['25.220.40'],ISO/TC 107/SC 7,9599,,[18331],"['en','fr']",8,

15573,IS,,ISO 8404:1986,Angle pins — Basic dimensions,Doigts de démoulage — Dimensions de base,1986-06-05,1,['25.120.30'],ISO/TC 29/SC 8,9599,,[30347],"['en','fr']",2,

30347,IS,,ISO 8404:2003,Tools for moulding — Angle pins,Outillage de moulage — Doigts de démoulage,2003-12-01,2,['25.120.30'],ISO/TC 29/SC 8,9599,[15573],[59870],"['en','fr']",4,"<p>ISO 8404:2003 specifies the basic dimensions, in millimetres, of headed angle pins (type A) and of straight angle pins (type B) intended for use in diescast dies and tools for moulding.</p><p>It also specifies the material hardness and designation of the angle pins.</p>"

59870,IS,,ISO 8404:2013,Tools for moulding — Angle pins,Outillage de moulage — Doigts de démoulage,2013-08-30,3,['25.120.30'],ISO/TC 29/SC 8,9599,[30347],[79116],"['en','fr']",4,"<p>ISO 8404:2013 specifies the basic dimensions, in millimetres, of headed angle pins (type A) and of straight angle pins (type B) intended for use in diescast dies and tools for moulding. It also specifies the material hardness and designation of the angle pins (types A and B).</p>"

15574,IS,,ISO 8405:1986,Ejector sleeves with cylindrical head — Basic series for general purposes,Éjecteurs tubulaires à tête cylindrique — Séries de base pour usages généraux,1986-06-12,1,['25.120.30'],ISO/TC 29/SC 8,9599,,[24800],"['en','fr']",2,

24800,IS,,ISO 8405:1998,Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes,Outillage de moulage — Éjecteurs tubulaires à tête cylindrique — Série de base pour usages généraux,1998-11-12,2,['25.120.30'],ISO/TC 29/SC 8,9599,[15574],[59871],"['en','fr']",4,

59871,IS,,ISO 8405:2013,Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes,Outillage de moulage — Éjecteurs tubulaires à tête cylindrique — Série de base pour usages généraux,2013-09-02,3,['25.120.30'],ISO/TC 29/SC 8,9599,[24800],[79117],"['en','fr']",3,"<p>ISO 8405:2013 specifies the dimensions and tolerances, in millimetres, of ejector sleeves with cylindrical head which are used in compression and injection moulds and in die casting dies. It also gives material guidelines and hardness requirements, and specifies the designation of ejector sleeves with cylindrical head.</p>"

79117,IS,,ISO 8405:2020,Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes,Outillage de moulage — Éjecteurs tubulaires à tête cylindrique — Série de base pour usages généraux,2020-10-19,4,['25.120.30'],ISO/TC 29/SC 8,9599,[59871],[84400],"['en','fr']",5,"<p>This document specifies the dimensions and tolerances, in millimetres, of ejector sleeves with cylindrical head which are used in compression and injection moulds and in diecasting dies.</p><p>It also gives material guidelines and hardness requirements, and specifies the designation of ejector sleeves with cylindrical head.</p>"

15575,IS,,ISO 8406:1991,Mould bases — Locating elements,Éléments de moules — Plots de centrage,1991-11-14,1,['25.120.30'],ISO/TC 29/SC 8,9599,,"[29916,29917]","['en','fr']",3,"<p>Specifies the basic dimensions for diameters from 6 mm to 32 mm, the material and hardness, and the designation of locating elements. Annex A is for information only.</p>"

29916,IS,,ISO 8406:2001,Tools for moulding — Mould bases — Round locating elements and spacers,Outillage de moulage — Éléments de moule — Plots de centrage cylindriques et rondelles de réglage,2001-10-18,2,['25.120.30'],ISO/TC 29/SC 8,9599,[15575],[45063],"['en','fr']",4,

15576,IS,,ISO 8407:1991,Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens,Métaux et alliages — Élimination des produits de corrosion sur les éprouvettes d'essai de corrosion,1991-07-11,1,['77.060'],ISO/TC 156,9599,,"[42634,36443]","['en','fr']",7,"<p>Specifies procedures designed to remove all corrosion products without significant removal of base metal. These procedures may, in some cases, also be applied to metal coatings. Annex A is for information only.</p>"

42634,IS,,ISO 8407:2009,Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens,Corrosion des métaux et alliages — Élimination des produits de corrosion sur les éprouvettes d'essai de corrosion,2009-10-27,2,['77.060'],ISO/TC 156,9599,[15576],[71866],"['en','fr','ru']",8,"<p>ISO 8407:2009 specifies procedures for the removal of corrosion products formed on metal and alloy corrosion test specimens during their exposure in corrosive environments. For the purpose of this International Standard, the term “metals” refers to pure metals and alloys.</p><p>The specified procedures are designed to remove all corrosion products without significant removal of base me

5211,IS,,ISO 841:1974,Numerical control of machines — Axis and motion nomenclature,Commande numérique des machines — Nomenclature des axes et des mouvements,1974-07-01,1,['25.040.20'],ISO/TC 184/SC 1,9599,,[23949],"['en','fr']",9,"<p>This edition cancels and replaces the ISO Recommendation R 841-1968. Defines axis and motion nomenclature, and is intended to simplify programming and to facilitate the interchangeability of recorded data. Applies to all numerically controlled machines.</p>"

15588,IS,,ISO 8419:1987,Narrow joined V-belts — Lengths in effective system,Courroies trapézoïdales jumelées étroites — Longueurs dans le système effectif,1987-12-10,1,['21.220.10'],ISO/TC 41/SC 1,9599,,[22753],"['en','fr']",2,

22753,IS,,ISO 8419:1994,Belt drives — Narrow joined V-belts — Lengths in effective system,Transmissions par courroies — Courroies trapézoïdales jumelées étroites — Longueurs dans le système effectif,1994-06-23,2,['21.220.10'],ISO/TC 41/SC 1,9599,[15588],[34461],"['en','fr']",3,"<p>Specifies for V-belts of cross-sections: 9J (effective width 8,9 mm), 15J (effective width 15,2 mm), 20J (effective width 20,9 mm), 25J (effective width 25,4 mm), the recommended effective lengths and their tolerances, and the conditions for measuring the effective length.</p>"

5212,IS,,ISO 842:1974,Raw materials for paints and varnishes — Sampling,Matières premières pour peintures et vernis — Échantillonnage,1974-07-01,1,['87.060.01'],ISO/TC 35,9599,,[5213],"['en','fr']",12,

5213,IS,,ISO 842:1984,Raw materials for paints and varnishes — Sampling,Matières premières pour peintures et vernis — Échantillonnage,1984-06-01,2,['87.060.01'],ISO/TC 35,9599,[5212],"[20365,28129]","['en','fr']",12,

15589,IS,,ISO 8420:1990,Animal and vegetable fats and oils — Determination of polar compounds content,Corps gras d'origines animale et végétale — Dosage des composés polaires,1990-10-11,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[33289],"['en','fr']",5,

15592,IS,,ISO 8421-3:1989,Fire protection — Vocabulary — Part 3: Fire detection and alarm,Protection contre l'incendie — Vocabulaire — Partie 3: Détection et alarme incendie,1989-11-02,1,"['13.220.01','01.040.13']",ISO/TC 21,9599,,[27185],"['en','fr']",7,<p>Concepts are given in English in alphabetical order. English and French alphabetical indices are provided. General use terms are covered by ISO 8421-1.</p>

15597,IS,,ISO 8421-8:1990,"Fire protection — Vocabulary — Part 8: Terms specific to fire-fighting, rescue services and handling hazardous materials","Protection contre l'incendie — Vocabulaire — Partie 8: Termes spécifiques à la lutte contre l'incendie, aux sauvetages et au traitement des produits dangereux",1990-08-16,1,"['13.220.01','01.040.13']",ISO/TC 21,9599,,[30929],"['en','fr']",22,

15600,IS,,ISO 8422:1991,Sequential sampling plans for inspection by attributes,Plans d'échantillonnage progressif pour le contrôle par attributs,1991-11-07,1,['03.120.30'],ISO/TC 69/SC 5,9599,,"[25658,39915]","['en','fr']",45,"<p>The specified plans apply to: end items, components and raw materials, operations, materials in process, supplies in storage, maintenance operations, data or records, administrative procedures. Annexes A, B and C form an integral part of this standard.</p>"

22628,IS,Cor,ISO 8422:1991/Cor 1:1993,Sequential sampling plans for inspection by attributes — Technical Corrigendum 1,Plans d'échantillonnage progressif pour le contrôle par attributs — Rectificatif technique 1,1993-09-02,1,['03.120.30'],ISO/TC 69/SC 5,9599,,[39915],"['en','fr']",1,"<p>Replaces the formula for p in subclause C.2.2, item b).</p>"

39915,IS,,ISO 8422:2006,Sequential sampling plans for inspection by attributes,Plans d'échantillonnage progressif pour le contrôle par attributs,2006-10-17,2,['03.120.30'],ISO/TC 69/SC 5,9599,"[22628,15600]",[64623],"['en','fr']",32,"<p>ISO 8422:2006 contains sequential sampling plans and procedures for inspection by attributes of discrete items. The plans are indexed in terms of the producer's risk point and the consumer's risk point. Therefore, they can be used not only for the purposes of acceptance sampling, but for a more general purpose of the verification of simple statistical hypotheses for proportions. ISO 8422:2006 provides procedures for sequential assessment of inspection results

15601,IS,,ISO 8423:1991,Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation),Plans d'échantillonnage progressif pour le contrôle par mesures des pourcentages de non conformes (écart-type connu),1991-11-07,1,['03.120.30'],ISO/TC 69/SC 5,9599,,"[41992,39294]","['en','fr']",39,<p>Applies if all of the following conditions are satisfied: a) inspected are continuing series of lots of discrete items supplied by one producer from one production process; b) only a single quality characteristic x is taken into consideration; c) production is stable and x has a known standard deviation; d) an upper or lower limit (or both) is defined.</p>

22629,IS,Cor,ISO 8423:1991/Cor 1:1993,Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) — Technical Corrigendum 1,Plans d'échantillonnage progressif pour le contrôle par mesures des pourcentages de non conformes (écart-type connu) — Rectificatif technique 1,1993-09-02,1,['03.120.30'],ISO/TC 69/SC 5,9599,,"[41992,39294]","['en','fr']",1,<p>Amends values in table 1 and subclause C.2.3 and equations in subclauses 3.2.2.1 and 3.2.3.1.</p>

41992,IS,,ISO 8423:2008,Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation),Plans d'échantillonnage progressif pour le contrôle par mesures des pourcentages de non-conformes (écart-type connu),2008-08-27,2,['03.120.30'],ISO/TC 69/SC 5,9599,"[22629,15601]",[67139],"['en','fr']",32,"<p>ISO 8423:2008 specifies sequential sampling plans and procedures for inspection by variables of discrete items. The plans are indexed in terms of producer's risk point and the consumer's risk point. Therefore, they are suitable not only for the purposes of acceptance sampling, but for the more general purpose of the testing of simple statistical hypotheses f

15602,IS,,ISO 8424:1987,Raw optical glass — Testing of the resistance to attack by aqueous acidic solutions at 25 degrees C and classification,Verre d'optique brut — Essai de résistance à l'attaque par des solutions acides aqueuses à 25 degrés C et classification,1987-09-17,1,['81.040.10'],ISO/TC 172/SC 3,9599,,[22561],"['en','fr']",6,

22561,IS,,ISO 8424:1996,Raw optical glass — Resistance to attack by aqueous acidic solutions at 25 degrees C — Test method and classification,Verre d'optique brut — Résistance à l'attaque par des solutions acides aqueuses à 25 degrés C — Méthode d'essai et classification,1996-06-20,2,['81.040.10'],ISO/TC 172/SC 3,9599,[15602],[77488],"['en','fr']",8,

15603,IS,,ISO 8425:1987,Determination of plutonium in pure plutonium nitrate solutions — Gravimetric method,Détermination du plutonium dans les solutions de nitrate de plutonium pur — Méthode gravimétrique,1987-03-12,1,['27.120.30'],ISO/TC 85/SC 5,9599,,"[41198,51660]","['en','fr']",4,"<p>Specifies a method for determining plutonium in pure plutonium nitrate solutions and reference solutions, containing between 100 and 300 g of plutonium per litre, in a nitric acid medium. The principle of the method, interferences, reagents, apparatus, procedure and expression of results are described.</p>"

15604,IS,,ISO 8426:1988,Hydraulic fluid power — Positive displacement pumps and motors — Determination of derived capacity,Transmissions hydrauliques — Pompes et moteurs volumétriques — Détermination de la cylindrée mesurée,1988-10-13,1,['23.100.10'],ISO/TC 131/SC 8,9599,,[40351],"['en','fr']",9,"<p>Specifies the methods for determining the derived capacity under steady-state conditions and at defined, continuously rotating shaft speeds. The unit may be tested as a pump, with mechanical energy applied to the shaft and hydraulic energy obtained at the fluid connections, or as a motor, with the hydraulic energy supplied to the fluid connections and mechanical energy obtained at the shaft. Accu

40351,IS,,ISO 8426:2008,Hydraulic fluid power — Positive displacement pumps and motors — Determination of derived capacity,Transmissions hydrauliques — Pompes et moteurs volumétriques — Détermination de la cylindrée mesurée,2008-01-22,2,['23.100.10'],ISO/TC 131/SC 8,9599,[15604],"[85275,85276,74349]","['en','fr']",14,"<p>ISO 8426:2008 specifies the methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors under steady-state conditions and at defined, continuous shaft rotational frequencies.</p><p>Units can be tested as a positive displacement pump, with mechanical energy applied to the shaft and hydraulic energy obtained at the outlet fluid c

15608,IS,,ISO 8430-1:1988,Resistance spot welding — Electrode holders — Part 1: Taper fixing 1:10,Soudage par points par résistance — Porte- électrodes — Partie 1: Cône de fixation 1:10,1988-12-08,1,['25.160.30'],ISO/TC 44/SC 6,9599,,[68224],"['en','fr']",3,"<p>Specifies the dimensions and tolerances of resistance spot welding electrode holders (type A) without offset and with the facility for cable clamping, and where a male taper 1:10 is used to fix the holder directly to the welding cylinder in multiple spot welding equipment. Covers also designation, materials, delivery conditions and marking.</p>"

15609,IS,,ISO 8430-2:1988,Resistance spot welding — Electrode holders — Part 2: Morse taper fixing,Soudage par points par résistance — Porte- électrodes — Partie 2: Cône Morse de fixation,1988-12-08,1,['25.160.30'],ISO/TC 44/SC 6,9599,,[68225],"['en','fr']",3,"<p>Specifies the dimensions and tolerances of resistance spot welding electrode holders (type B) without offset and with a facility for cable clamping, and where a male Morse taper is used to fix the holder directly to the welding cylinder in multiple spot welding equipment. Covers also designation, materials, delivery conditions and marking.</p>"

15610,IS,,ISO 8430-3:1988,Resistance spot welding — Electrode holders — Part 3: Parallel shank fixing for end thrust,Soudage par points par résistance — Porte-électrodes — Partie 3: Emmanchement cylindrique pour poussée en bout,1988-12-01,1,['25.160.30'],ISO/TC 44/SC 6,9599,,[68226],"['en','fr']",3,"<p>Specifies the dimensions and tolerances of resistance spot welding electrode holders (type C) without offset and with a facility for cable clamping, and where a clamp is used to fix the holder directly to the welding cylinder in multiple spot welding equipment. Covers also designation, materials and marking.</p>"

15611,IS,Cor,ISO 8430-3:1988/Cor 1:1990,Resistance spot welding — Electrode holders — Part 3: Parallel shank fixing for end thrust — Technical Corrigendum 1,Soudage par points par résistance — Porte-électrodes — Partie 3: Emmanchement cylindrique pour poussée en bout — Rectificatif technique 1,1990-10-12,1,['25.160.30'],ISO/TC 44/SC 6,9599,,[68226],"['en','fr']",1,

15616,IS,,ISO 8434-1:1994,Metallic tube connections for fluid power and general use — Part 1: 24 degree compression fittings,Raccords de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales — Partie 1: Raccords à compression à 24 degrés,1994-05-26,1,['23.100.40'],ISO/TC 131/SC 4,9599,[15615],"[38095,26660]","['en','fr']",28,"<p>Specifies general (pressure, temperature, designation, assembly, marking) and dimensional requirements for the design and performance of 24° compression fittings which are suitable for use with ferrous and non-ferrous tubes with outside diameters from 4 mm to 42 mm, inclusive. These fittings are for use in fluid power and general

38095,IS,,ISO 8434-1:2007,Metallic tube connections for fluid power and general use — Part 1: 24 degree cone connectors,Raccordements de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales — Partie 1: Raccords coniques à 24 degrés,2007-08-23,2,['23.100.40'],ISO/TC 131/SC 4,9599,"[15616,15619]",[62079],"['en','fr']",46,<p>ISO 8434-1:2007 specifies the general and dimensional requirements for 24° cone connectors using cutting ring and O‑ring seal cone (referred to as DKO) suitable for use with ferrous and non‑ferrous tubes with outside diameters from 4 mm to 42 mm inclusive. These connectors are for use in fluid power and general applications within the

15615,IS,,ISO 8434:1986,Hydraulic fluid power — Connection for tubes and hoses — Dimensions and designs for 37 degrees flare and 24 degrees flareless fittings,Transmissions hydrauliques — Raccordements des tubes et tuyaux — Dimensions et types de raccords à évasement à 37 degrés et à cône à 24 degrés,1986-10-23,1,['23.100.40'],ISO/TC 131/SC 4,9599,,"[15616,15617]","['en','fr']",8,

15617,IS,,ISO 8434-2:1994,Metallic tube connections for fluid power and general use — Part 2: 37 degree flared fittings,Raccords de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales — Partie 2: Raccords évasés à 37 degrés,1994-07-28,1,['23.100.40'],ISO/TC 131/SC 4,9599,[15615],"[39278,25455]","['en','fr']",28,"<p>Specifies general and dimensional requirements for the design and performance of 37° flared fittings which are suitable for use with ferrous and non-ferrous tubes with outside diameters from 6 mm to 50 mm, inclusive. These fittings are for use in fluid power and general applications within the limits of pressure and temperature specified for

15618,IS,,ISO 8434-3:1995,Metallic tube connections for fluid power and general use — Part 3: O-ring face seal fittings,Raccords de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales — Partie 3: Raccords à joints faciaux toriques,1995-02-02,1,['23.100.40'],ISO/TC 131/SC 4,9599,,[37041],"['en','fr']",29,"<p>Specifies general and dimensional requirements for the design and performance of O-ring face seal fittings of steel for tube outside diameters or hose inside diameters of 6 mm to 38 mm, inclusive. These fittings are for use in fluid power and general applications where elastomeric seals can be used to prevent fluid leakage. They are intended for the

15619,IS,,ISO 8434-4:1995,Metallic tube connections for fluid power and general use — Part 4: 24 degree cone connectors with O-ring weld-on nipples,"Raccords de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales — Partie 4: Raccords à cône à 24 degrés, à embout à souder à joint torique",1995-03-23,1,['23.100.40'],ISO/TC 131/SC 4,9599,,"[38095,26660]","['en','fr']",25,"<p>Lays down general and dimensional requirements for the design and performance of 24° cone connectors with O-ring weld-on nipples that are suitable for use with steel and stainless steel tubes with outside diameters from 6 mm to 42 mm, inclusive. These fittings are for use in fluid pow

20505,IS,,ISO 8434-5:1995,Metallic tube connections for fluid power and general use — Part 5: Test methods for threaded hydraulic fluid power connections,Raccords de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales — Partie 5: Méthodes d'essai pour raccords filetés pour transmissions hydrauliques,1995-11-23,1,['23.100.40'],ISO/TC 131/SC 4,9599,,[33978],"['en','fr']",7,<p>Specifies uniform methods for the testing and performance evaluation of threaded metallic tube connections for hydraulic fluid power lines.</p>

15623,IS,,ISO 8437:1989,Snowthrowers — Safety requirements and test procedures,Chasse-neige — Exigences de sécurité et essais,1989-11-23,1,['43.160'],ISO/TC 23/SC 13,9599,,"[66206,37764,66207,66190,66205]","['en','fr']",23,"<p>Specifies safety requirements and test procedures applicable to walk-behind and riding power snow-throwers, lawn riding tractors or lawn and garden tractors (as defined in ISO 5395-1) used with snowthrower attachments, and to snowthrower attachments themselves. Not applicable to airport, highway and agricultural types of snow removal machines and equipment.</p>"

25395,IS,Amd,ISO 8437:1989/Amd 1:1997,Snowthrowers — Safety requirements and test procedures — Amendment 1,Chasse-neige — Exigences de sécurité et essais — Amendement 1,1997-03-27,1,['43.160'],ISO/TC 23/SC 13,9599,,"[66206,37764,66207,66190,66205]","['en','fr']",3,

5216,IS,,ISO 844:1978,Cellular plastics — Compression test of rigid materials,Plastiques alvéolaires — Essai de compression des matériaux rigides,1978-09-01,1,['83.100'],ISO/TC 61/SC 10,9599,,[20071],"['en','fr']",3,

20071,IS,,ISO 844:1998,Cellular plastics — Compression test for rigid materials — Specification,Plastiques alvéolaires — Essai de compression des matériaux rigides — Specification,1998-05-28,2,['83.100'],ISO/TC 61/SC 10,9599,[5216],[34846],"['en','fr']",6,

34846,IS,,ISO 844:2001,Rigid cellular plastics — Determination of compression properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de compression,2001-05-31,3,['83.100'],ISO/TC 61/SC 10,9599,[20071],[34847],"['en','fr']",7,

34847,IS,,ISO 844:2004,Rigid cellular plastics — Determination of compression properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de compression,2004-06-10,4,['83.100'],ISO/TC 61/SC 10,9599,[34846],[45078],['en'],8,"<p>ISO 844:2004 specifies a method of determining</p><p>a) the compressive strength and corresponding relative deformation</p><p>or</p><p>b) the compressive stress at 10 % relative deformation</p><p>and</p><p>c) when desired, the compressive modulus</p><p>of rigid cellular plastics.</p>"

45078,IS,,ISO 844:2007,Rigid cellular plastics — Determination of compression properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de compression,2007-04-04,5,['83.100'],ISO/TC 61/SC 10,9599,[34847],[55473],"['en','fr']",8,"<p>ISO 844:2007 specifies a method of determining</p><p>a) the compressive strength and corresponding relative deformation</p><p>or</p><p>b) the compressive stress at 10 % relative deformation</p><p>and</p><p>c) when desired, the compressive modulus</p><p>of rigid cellular plastics.</p>"

55473,IS,,ISO 844:2014,Rigid cellular plastics — Determination of compression properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de compression,2014-07-21,6,['83.100'],ISO/TC 61/SC 10,9599,[45078],[73560],"['en','fr']",10,"<p>ISO 844:2014 specifies a method of determining a) the compressive strength and corresponding relative deformation, or b) the compressive stress at 10 % relative deformation, and c) when desired, the compressive modulus of rigid cellular plastics.</p><p>There are two procedures:</p><p>- Procedure A employs crosshead motion for determination of compressive properties. Procedure A is intended to be used when compressive stress at 10 % relative d

73560,IS,,ISO 844:2021,Rigid cellular plastics — Determination of compression properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de compression,2021-03-31,7,['83.100'],ISO/TC 61/SC 10,9599,[55473],[86145],"['en','fr']",15,"<p>This document specifies methods for determining the compressive strength and corresponding relative deformation, the compressive stress at 10 % relative deformation, and the compressive modulus of rigid cellular plastics.</p>"

15628,IS,,ISO 8442:1988,Stainless steel and silver-plated table cutlery — Requirements,Couverts et coutellerie de table en acier inoxydable et en métal argenté — Spécifications,1988-12-01,1,['97.040.60'],ISO/TC 186,9599,,[23095],"['en','fr']",12,

15629,IS,,ISO 8443:1985,Radial ball bearings with flanged outer ring — Flange dimensions,Roulements à billes avec bague extérieure à collet — Dimensions de collets,1985-10-10,1,['21.100.20'],ISO/TC 4,9599,,[29379],"['en','fr']",4,

15630,IS,Cor,ISO 8443:1985/Cor 1:1990,Radial ball bearings with flanged outer ring — Flange dimensions — Technical Corrigendum 1,Roulements à billes avec bague extérieure à collet — Dimensions de collets — Rectificatif technique 1,1990-11-05,1,['21.100.20'],ISO/TC 4,9599,,[29379],"['en','fr']",1,

29379,IS,,ISO 8443:1999,Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions,Roulements — Roulements à billes avec bague extérieure à collet — Dimensions de collet,1999-03-11,2,['21.100.20'],ISO/TC 4,9599,"[15630,15629]",[55218],"['en','fr']",5,

55218,IS,,ISO 8443:2010,Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions,Roulements — Roulements à billes avec bague extérieure à collet — Dimensions de collet,2010-06-29,3,['21.100.20'],ISO/TC 4/SC 12,9599,[29379],[83050],"['en','fr']",5,<p>ISO 8443:2010 specifies flange dimensions of single-row radial ball bearings with flanged outer ring and single-row angular contact ball bearings with flanged outer ring.</p>