Withdrawn and superseded ISO standards — page 16 of 246

38529,IS,,ISO 11074:2005,Soil quality — Vocabulary,Qualité du sol — Vocabulaire,2005-10-27,1,"['01.040.13','13.080.01']",ISO/TC 190,9599,"[26399,19061,19062]",[59259],"['en','fr']",83,"<p>ISO 11074:2005 defines terms used in the field of soil quality.</p><p>The terms are classified under the following main headings: 1) General terms and definitions (terms relating to soil, to soil materials, to land and sites); 2) Description of soil (soil characteristics, soil water, properties of soils and substances, processes in soil, contamination, background content); 3) Sampling (general terms and definitions, sample types/sampling type, sampling stages, execution of sampling, quality control samples,

44804,IS,Cor,ISO 11074:2005/Cor 1:2006,Soil quality — Vocabulary — Technical Corrigendum 1,Qualité du sol — Vocabulaire — Rectificatif technique 1,2006-09-19,1,"['01.040.13','13.080.01']",ISO/TC 190,9599,,[59259],"['en','fr']",1,

59259,IS,,ISO 11074:2015,Soil quality — Vocabulary,Qualité du sol — Vocabulaire,2015-05-08,2,"['01.040.13','13.080.01']",ISO/TC 190,9599,"[38529,44804]",[83168],"['de','en','fr']",,"<p>ISO 11074:2015 defines a list of terms used in the preparation of the standards in the field of soil quality. The terms are classified under the following main headings:</p><p>- general terms (terms relating to soil, soil materials, land, and sites);</p><p>- description of soil (soil characteristics, soil water, properties of soils and substances, processes in soil, contamination, pollution, background content);</p><p>- sampling (general terms, sample types/sampling type, sampling stages, execution of sampling

74731,IS,Amd,ISO 11074:2015/Amd 1:2020,Soil quality — Vocabulary — Amendment 1,Qualité du sol — Vocabulaire — Amendement 1,2020-02-07,2,"['01.040.13','13.080.01']",ISO/TC 190,9599,,[83168],"['en','fr']",10,

26399,IS,,ISO 11074-4:1999,Soil quality - Vocabulary — Part 4: Terms and definitions related to rehabilitation of soils and sites,Qualité du sol - Vocabulaire — Partie 4: Termes et définitions relatifs à la réhabilitation des sols et sites,1999-12-16,1,"['01.040.13','13.080.01']",ISO/TC 190,9599,,[38529],"['en','fr']",22,

19063,IS,,ISO 11075:1993,"Aerospace — Aircraft de-icing/anti-icing Newtonian fluids, ISO type I",Aéronautique et espace — Liquides newtoniens ISO type I de dégivrage/antigivrage des aéronefs,1993-07-01,1,['49.100'],ISO/TC 20/SC 9,9599,,[44185],"['en','fr']",7,"<p>Establishes the minimum requirements for Newtonian fluids (composition, properties, materials compatibility, environmental protection, anti-icing performance, quality assurance provisions) used in the removal and prevention of ice, snow or frost on exterior surface of parked aircraft.</p>"

19064,IS,,ISO 11076:1993,Aerospace — Aircraft de-icing/anti-icing methods with fluids,Aéronautique et espace — Méthodes de dégivrage/antigivrage des aéronefs à l'aide de liquides,1993-07-01,1,['49.100'],ISO/TC 20/SC 9,9599,,[31029],"['en','fr']",10,

31029,IS,,ISO 11076:2000,Aerospace — Aircraft de-icing/anti-icing methods with fluids,Aéronautique et espace — Méthodes de dégivrage/antigivrage des aéronefs à l'aide de liquides,2000-03-09,2,['49.100'],ISO/TC 20/SC 9,9599,[19064],[34741],['en'],20,

43045,IS,,ISO 11076:2006,Aircraft — Ground-based de-icing/anti-icing methods with fluids,Aéronefs — Méthodes de dégivrage/d'antigivrage au sol à l'aide de liquides,2006-11-13,4,['49.100'],ISO/TC 20/SC 9,9599,[34741],[54925],['en'],32,"<p>ISO 11076:2006 establishes the minimum requirements for aircraft de-icing/anti-icing methods on the ground, in accordance with the ICAO Manual of aircraft ground de-icing/anti-icing operations and relevant national regulations, to facilitate the safe operation of transport aircraft during icing conditions. This International Standard does not specify requirements for specific aircraft model types.</p><p>Frost, ice or snow deposits, which can seriously affect

54925,IS,,ISO 11076:2012,Aircraft — De-icing/anti-icing methods on the ground,Aéronefs — Méthodes de dégivrage et d'anti-givrage au sol,2012-11-05,5,['49.100'],ISO/TC 20/SC 9,9599,[43045],[74304],"['en','fr','ru']",4,"<p>ISO 11076:2012 establishes the minimum requirements for aircraft de-icing/anti-icing methods on the ground, in accordance with the ICAO <i>Manual of aircraft ground de-icing/anti-icing operations </i>(Doc. 9640-AN/940) and relevant national regulations, to facilitate the safe operation of main-line and regional civil transport airplanes during icing conditions. ISO 11076:2012 does not specify requirements for specific aircraft model types.</p>"

19065,IS,,ISO 11077:1993,Aerospace — Self-propelled de-icing/anti-icing vehicles — Functional requirements,Aéronautique et espace — Véhicules automoteurs de dégivrage/antigivrage des aéronefs — Exigences fonctionnelles,1993-07-01,1,['49.100'],ISO/TC 20/SC 9,9599,,[60769],"['en','fr']",5,"<p>Specifies the general functional and performance requirements for a self-propelled, boom type aerial device, equipped with an aircraft de-icing/anti-icing fluid spraying system.</p>"

19066,IS,,ISO 11078:1994,"Aerospace — Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II",Aéronautique et espace — Liquides non newtoniens ISO type II de dégivrage/antigivrage des aéronefs,1994-10-27,1,['49.100'],ISO/TC 20/SC 9,9599,,[44186],"['en','fr']",29,"<p>Establishes the requirements for non-Newtonian fluids used in the removal and prevention of frozen deposits of frost, ice and snow on exterior surfaces of parked aircraft and the minimum requirements for an environmental test chamber and test procedure to carry out anti-icing performance tests according to the current materials specification for ISO type II aircraft de-icing/anti-icing non-Newtonian fluids.</p>"

5628,IS,,ISO 1108:1980,Spices and condiments — Determination of non-volatile ether extract,Épices — Détermination de l'extrait éthéré non volatil,1980-02-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[5629],"['en','fr']",2,

19070,IS,,ISO 11083:1994,"Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide","Qualité de l'eau — Dosage du chrome(VI) — Méthode par spectrométrie d'absorption moléculaire avec la 1,5-diphénylcarbazide",1994-08-11,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[85399],"['en','fr']",5,"<p>Specifies a spectrometric method for determination of chromium(VI) in water. The method is applicable to the determination of dissolved chromium(VI) in waters in the concentration range of 0,05 mg/l to 3 mg/l. The application range may be extended by dilution of the sample.</p>"

38428,IS,,ISO 11085:2008,"Cereals, cereals-based products and animal feeding stuffs — Determination of crude fat and total fat content by the Randall extraction method","Céréales, produits céréaliers et aliments des animaux — Détermination de la teneur en matières grasses brutes et en matières grasses totales par la méthode d'extraction de Randall",2008-04-22,1,['67.060'],ISO/TC 34/SC 4,9599,[13964],[63542],"['en','fr']",16,"<p>ISO 11085:2008 specifies procedures for the determination of the fat content of cereals, cereal-based products and animal feeding stuffs. These procedures are not applicable to oilseeds and oleaginous fruits.</p><p>The choice of procedure to be used depends on the nat

19074,IS,,ISO 11087:1997,Alpine ski-bindings — Retention devices — Safety requirements and test methods,Fixations de skis alpins — Dispositifs de retenue — Exigences de sécurité et méthodes d'essai,1997-03-13,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[37583],"['en','fr']",9,

37583,IS,,ISO 11087:2004,Alpine ski-bindings — Retention devices — Requirements and test methods,Fixations de skis alpins — Dispositifs de retenue — Exigences et méthodes d'essai,2004-02-24,2,['97.220.20'],ISO/TC 83/SC 4,9599,[19074],"[65973,40838]","['en','fr']",10,"<p>ISO 11087:2004 specifies the requirements for ski brakes and binding straps.</p><p>It applies to alpine retention devices which are used to reduce the risk of injury, caused by the ski after the ski's release.</p>"

19075,IS,,ISO 11088:1993,"Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system","Montage, réglage et contrôle d'un ensemble ski-fixation-chaussure (SFC) pour skis alpins",1993-12-02,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[24479],"['en','fr']",11,

24479,IS,,ISO 11088:1998,"Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system","Montage, réglage et contrôle d'un ensemble ski/fixation/chaussure (SFC) pour skis alpins",1998-02-19,2,['97.220.20'],ISO/TC 83/SC 4,9599,[19075],[36249],"['en','fr']",14,

36249,IS,,ISO 11088:2004,"Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system","Montage, réglage et contrôle d'un ensemble ski/fixation/chaussure (SFC) pour skis alpins",2004-05-03,3,['97.220.20'],ISO/TC 83/SC 4,9599,[24479],[44398],"['en','fr']",17,"<p>ISO 11088:2004 specifies assembly, adjustment and inspection procedures for the binding mechanisms of skis, integrating in a practical way the requirements of those International Standards which relate to skis, boots and bindings. It is intended for all individuals and institutions concerned with those procedures, and especially for sports retailers. It is applicable to a ski/binding/boot/ system (S-B-B) for alpin

44398,IS,,ISO 11088:2006,"Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system","Montage, réglage et contrôle d'un ensemble ski/fixation/chaussure (SFC) pour skis alpins",2006-10-11,4,['97.220.20'],ISO/TC 83/SC 4,9599,[36249],"[56105,68520]","['en','fr']",16,"<p>ISO 11088:2006 specifies assembly, adjustment and inspection procedures for the binding mechanisms of skis, integrating in a practical way, the requirements of those International Standards which are related to skis, bindings and boots.</p><p>It is intended for all individuals and institutions concerned with those procedures, and especially for sports retailers.</p><p>ISO 11088:2006 is applicable to a ski/

57223,IS,Amd,ISO 11088:2006/Amd 1:2012,"Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system — Amendment 1","Montage, réglage et contrôle d'un ensemble ski/fixation/chaussure (SFC) pour skis alpins — Amendement 1",2012-03-19,4,['97.220.20'],ISO/TC 83/SC 4,9599,,[68520],"['en','fr']",2,

68520,IS,,ISO 11088:2015,"Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system","Montage, réglage et contrôle d'un ensemble ski/fixation/chaussure (SFC) pour skis alpins",2015-12-03,5,['97.220.20'],ISO/TC 83/SC 4,9599,"[57223,44398]",[71932],['en'],13,"<p>ISO 11088:2015 specifies assembly, adjustment and inspection procedures for the binding mechanisms of skis, integrating in a practical way, the requirements of those International Standards which are related to skis, bindings and boots.</p><p>It is intended for all individuals and institutions concerned with those procedures, and especially for sports retailers.</p><p>It is applicable to a ski/binding/boot system

71932,IS,,ISO 11088:2018,"Alpine ski/binding/boot (S-B-B) system — Assembly, adjustment and inspection","Ensemble ski/fixation/chaussure (SFC) pour skis alpins — Montage, réglage et contrôle",2018-05-30,6,['97.220.20'],ISO/TC 83/SC 4,9599,[68520],[84084],"['en','fr']",14,"<p>This document specifies assembly, adjustment and inspection procedures for the binding mechanisms of skis, integrating, in a practical way, the requirements of those International Standards which are related to skis, bindings and boots.</p><p>It is intended for all individuals and institutions concerned with those procedures, and especially for sports retailers.</p><p>It is applicable to a ski-binding-boot system (S-B-B)

19076,IS,,ISO 11089:1997,"Rubber, raw synthetic — Determination of anti-degradants by high-performance liquid chromatography",Caoutchouc synthétique brut — Détermination des agents de protection par chromatographie en phase liquide à haute performance,1997-06-05,1,['83.040.10'],ISO/TC 45/SC 2,9599,,[51277],"['en','fr']",4,

5630,IS,,ISO 1109:1975,Refractory products — Classification of dense shaped refractory products,Produits réfractaires — Classification des produits réfractaires façonnés denses,1975-12-01,1,['81.080'],ISO/TC 33,9599,,"[36115,1205]","['en','fr']",2,

19077,IS,,ISO 11090-1:1998,Machine tools — Test conditions for die sinking electro-discharge machines (EDM) — Terminology and testing of accuracy — Part 1: Single column machines (cross slide table type and fixed table type),Machines-outils — Conditions d'essai des machines d'électroérosion en plongée — Terminologie et contrôle de la précision — Partie 1: Machines à un montant (à bancs en croix et table fixe),1998-03-05,1,['25.120.40'],ISO/TC 39/SC 2,9599,,[55020],"['en','fr']",28,

19078,IS,,ISO 11090-2:1998,Machine tools — Test conditions for die sinking electro-discharge machines (EDM) — Terminology and testing of accuracy — Part 2: Two column machines (slide-head type and cross-slide table type),Machines-outils — Conditions d'essai des machines d'électroérosion en plongée — Terminologie et contrôle de la précision — Partie 2: Machines à deux montants (type à tête mobile et type à bancs en croix),1998-09-24,1,['25.120.40'],ISO/TC 39/SC 2,9599,,[55021],"['en','fr']",27,

19081,IS,,ISO 11092:1993,Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test),Textiles — Effets physiologiques — Mesurage de la résistance thermique et de la résistance à la vapeur d'eau en régime stationnaire (essai de la plaque chaude gardée transpirante),1993-10-07,1,['59.080.01'],ISO/TC 38,9599,,[65962],"['en','fr']",10,"<p>The methods of measurement specified apply to e.g. fabrics, films, coatings, foams and leather, including multilayer assemblies, for use in clothing, quilts, sleeping bags, upholstery and similar textile or textile-like products. Application is restricted to a maximum therm

52228,IS,Amd,ISO 11092:1993/Amd 1:2012,Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) — Amendment 1,Textiles — Effets physiologiques — Mesurage de la résistance thermique et de la résistance à la vapeur d'eau en régime stationnaire (essai de la plaque chaude gardée transpirante) — Amendement 1,2012-09-17,1,['59.080.01'],ISO/TC 38,9599,,[65962],"['en','fr']",3,

65962,IS,,ISO 11092:2014,Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test),Textiles — Effets physiologiques — Mesurage de la résistance thermique et de la résistance à la vapeur d'eau en régime stationnaire (essai de la plaque chaude gardée transpirante),2014-08-20,2,['59.080.01'],ISO/TC 38,9599,"[52228,19081]","[85998,83676]","['en','fr']",15,"<p>ISO 11092:2014 specifies methods for the measurement of the thermal resistance and water-vapour resistance, under steady-state conditions, of e.g. fabrics, films, coatings, foams and leather, including multilayer assemblies, for use in clothing, quilt

1655,IS,,ISO 11093-2:1994,Paper and board — Testing of cores — Part 2: Conditioning of test samples,Papier et carton — Essais des mandrins — Partie 2: Conditionnement des échantillons pour essai,1994-12-08,1,['85.060'],ISO/TC 6,9599,,[89392],"['en','fr']",2,"<p>Specifies the conditioning atmospheres to be used for conditioning and testing cores, the apparatus and the procedure used.</p>"

1565,IS,,ISO 11093-4:1997,Paper and board — Testing of cores — Part 4: Measurement of dimensions,Papier et carton — Essais des mandrins — Partie 4: Mesurage des dimensions,1997-06-12,1,['85.060'],ISO/TC 6,9599,,[65180],"['en','fr']",10,

65180,IS,,ISO 11093-4:2016,Paper and board — Testing of cores — Part 4: Measurement of dimensions,Papier et carton — Essais des mandrins — Partie 4: Mesurage des dimensions,2016-05-27,2,['85.060'],ISO/TC 6,9599,[1565],[77831],"['en','fr']",12,"<p>ISO 11093-4:2016 specifies test methods for the determination of the internal diameter, the external diameter, the wall thickness and the length, of paper and board cores.</p>"

1376,IS,,ISO 11093-5:1994,Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation,Papier et carton — Essais des mandrins — Partie 5: Détermination des caractéristiques de rotation,1994-12-08,1,['85.060'],ISO/TC 6,9599,,[50642],"['en','fr']",2,"<p>Lays down a method for determining the characteristics of concentric rotation of cylindrical board cores which meet the following criteria: minimum wall thickness 5 mm, minimum external diameter 60 mm, maximum sample length 3 200 mm.</p>"

50642,IS,,ISO 11093-5:2009,Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation,Papier et carton — Essais des mandrins — Partie 5: Détermination des caractéristiques de rotation,2009-08-21,2,['85.060'],ISO/TC 6,9599,[1376],[69089],"['en','fr']",4,<p>ISO 11093-5:2009 specifies a method for determining the characteristics of concentric rotation of cylindrical board cores which meet the following criteria:</p><ul><li>minimum wall thickness: 5 mm;</li><li>minimum external diameter: 60 mm;</li><li>maximum sample length: 3 200 mm.</li></ul>

56209,IS,Cor,ISO 11093-5:2009/Cor 1:2010,Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation — Technical Corrigendum 1,Papier et carton — Essais des mandrins — Partie 5: Détermination des caractéristiques de rotation — Rectificatif technique 1,2010-04-19,2,['85.060'],ISO/TC 6,9599,,[69089],"['en','fr']",1,

22010,IS,,ISO 11093-6:1996,Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method,Papier et carton — Essais des mandrins — Partie 6: Détermination de la résistance à la flexion par la méthode des trois points,1996-10-17,1,['85.060'],ISO/TC 6,9599,,[36453],"['en','fr']",2,

22011,IS,,ISO 11093-7:1997,Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method,Papier et carton — Essais des mandrins — Partie 7: Détermination du module de flexion par la méthode à trois points,1997-12-18,1,['85.060'],ISO/TC 6,9599,,[55076],"['en','fr']",7,

1529,IS,,ISO 11093-8:1997,Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis,Papier et carton — Essais des mandrins — Partie 8: Détermination de la fréquence propre et du module de flexion par analyse modale expérimentale,1997-12-18,1,['85.060'],ISO/TC 6,9599,,[56120],"['en','fr']",5,

56120,IS,,ISO 11093-8:2012,Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis,Papier et carton — Essais des mandrins — Partie 8: Détermination de la fréquence propre et du module de flexion par analyse modale expérimentale,2012-08-31,2,['85.060'],ISO/TC 6,9599,[1529],[72342],['en'],7,<p>ISO 11093-8:2012 specifies a method for the determination of the flexural modulus by using experimentally measured natural frequencies in the free-free mode of transverse vibration of cylindrical paper and board cores.</p>

63345,IS,Cor,ISO 11093-8:2012/Cor 1:2013,Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis — Technical Corrigendum 1,Papier et carton — Essais des mandrins — Partie 8: Détermination de la fréquence propre et du module de flexion par analyse modale expérimentale — Rectificatif technique 1,2013-01-18,2,['85.060'],ISO/TC 6,9599,,[72342],['en'],3,

1619,IS,,ISO 11093-9:1994,Paper and board — Testing of cores — Part 9: Determination of flat crush resistance,Papier et carton — Essais des mandrins — Partie 9: Détermination de la résistance à l'écrasement à plat,1994-12-08,1,['85.060'],ISO/TC 6,9599,,[37418],"['en','fr']",2,<p>Specifies a method for determining the maximum flat crush resistance of wound paper and board cores.</p>

37418,IS,,ISO 11093-9:2006,Paper and board — Testing of cores — Part 9: Determination of flat crush resistance,Papier et carton — Essais des mandrins — Partie 9: Détermination de la résistance à l'écrasement à plat,2006-10-11,2,['85.060'],ISO/TC 6,9599,[1619],[76084],"['en','fr','ru']",4,<p>ISO 11093-9:2006 specifies a method for the determination of the maximum flat crush resistance of wound paper and board cores.</p>

19083,IS,,ISO 11094:1991,"Acoustics — Test code for the measurement of airborne noise emitted by power lawn mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments","Acoustique — Code d'essai pour le mesurage du bruit aérien émis par les tondeuses à gazon à moteur, les tracteurs de pelouse, les tracteurs de jardin et de pelouse, les tondeuses à usage professionnel, et les tracteurs de jardin et de pelouse avec équipements de tonte adaptables",1991-11-07,1,"['17.140.20','65.060.70']",ISO/TC 43/SC 1,9599,,[51082],"['en','fr']",11,<p>Specifies methods for measuring the sound pressure levels at prescribed microphone positions in

34972,IS,,ISO 11096:2002,"Road vehicles — Pedestrian protection — Impact test method for pedestrian thigh, leg and knee","Véhicules routiers — Protection des piétons — Méthode d'essai de choc pour la cuisse, la jambe inférieure et le genou des piétons",2002-07-11,1,['43.020'],ISO/TC 22,9599,,[58099],['en'],22,"<p>This International Standard specifies a test method for simulating the lateral impact between the front of a motor vehicle (as defined in ISO 3833) of up to 3,5 tonnes GVM (gross vehicle mass) and an adult pedestrian.</p><p>The test method addresses the reduction of pedestrian thigh, leg and knee injuries. It is not applicable to testing for, or the evaluation of, injuries to other

3911,IS,,ISO 111:1978,Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 4 degrees 20',Matériel pour l'industrie textile — Cônes pour bobinage croisé — Demi-angle du cône 4 degrés 20',1978-06-01,1,['59.120.20'],ISO/TC 72/SC 1,9599,,[21962],"['en','fr']",2,

5631,IS,,ISO 1110:1975,"Plastics — Polyamide 66, 610 and 6 — Accelerated conditioning of test specimens","Matières plastiques — Polyamides 66, 610 et 6 — Conditionnement accéléré d'éprouvettes",1975-06-01,1,['83.080.20'],ISO/TC 61,9599,,[5632],"['en','fr']",2,

5632,IS,,ISO 1110:1987,Plastics — Polyamides — Accelerated conditioning of test specimens,Plastiques — Polyamides — Conditionnement accéléré d'éprouvettes,1987-04-16,2,['83.080.20'],ISO/TC 61/SC 9,9599,[5631],[22176],"['en','fr']",2,

22176,IS,,ISO 1110:1995,Plastics — Polyamides — Accelerated conditioning of test specimens,Plastiques — Polyamides — Conditionnement accéléré d'éprouvettes,1995-01-26,3,['83.080.20'],ISO/TC 61/SC 9,9599,[5632],"[76395,34834]","['en','fr']",2,"<p>The method described is based on storing the test specimens in an atmosphere of (70 ± 1) °C and (62 ± 1) % relative humidity (psychrometric temperature difference of (10 ± 0,3) °C), until moisture absorption by the specimen has reached at least 95 % of its equilibrium level. It is applicable to polyamides and copolyamides in grades containing fillers and other additives, but not to grades containing more than 2 % (m/m) extractables. The equilibrium m

19090,IS,,ISO 11102-1:1997,Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests,Moteurs alternatifs à combustion interne — Dispositifs de démarrage à la manivelle — Partie 1: Exigences de sécurité et essais,1997-09-25,1,['27.020'],ISO/TC 70,9599,,[77739],"['en','fr']",4,

19093,IS,,ISO 11104:1991,Space data and information transfer systems — Time code formats,Systèmes de transfert des informations et données spatiales — Formats des codes horaires,1991-11-14,1,['49.140'],ISO/TC 20/SC 13,9599,,[38141],"['en','fr']",3,<p>Applies to civil space applications. The requirements specified are the technical recommendations made in: CCSDS 301.0-B-2 (issue 2) April 1990 which is adopted as an International Standard.</p>

38141,IS,,ISO 11104:2003,Space data and information transfer systems — Time code formats,Systèmes de transfert des informations et données spatiales — Formats des codes horaires,2003-12-10,2,['49.140'],ISO/TC 20/SC 13,9599,[19093],[59415],['en'],43,<p>ISO 11104:2003 specifies the requirements for time code formats for space data and information transfer systems for civil space applications.</p>

19094,IS,,ISO 11105:1995,Small craft — Ventilation of petrol engine and/or petrol tank compartments,Navires de plaisance — Ventilation des compartiments moteur à essence et/ou réservoirs à essence,1995-03-23,1,['47.080'],ISO/TC 188,9599,,[26651],"['en','fr']",6,

26651,IS,,ISO 11105:1997,Small craft — Ventilation of petrol engine and/or petrol tank compartments,Navires de plaisance — Ventilation des compartiments moteur à essence et/ou réservoir à essence,1997-05-08,2,['47.080'],ISO/TC 188,9599,[19094],[72109],"['en','fr']",6,

1708,IS,,ISO 11108:1996,Information and documentation — Archival paper — Requirements for permanence and durability,Information et documentation — Papier pour documents d'archives — Prescriptions pour la permanence et la durabilité,1996-12-26,1,"['01.140.20','85.060']",ISO/TC 46/SC 10,9599,,"[88909,87845]","['en','fr']",4,<p>Contains requirements for unprinted archival paper intended for documents and publications required for permanent retention and frequent use. For these purposes paper of high performance and high durability is required.</p>

5633,IS,,ISO 1111-1:1983,Single cold-reduced tinplate and single cold-reduced blackplate — Part 1: Electrolytic and hot-dipped tinplate sheet and blackplate sheet,Fer-blanc et fer noir laminés à froid par simple réduction — Partie 1: Feuilles de fer-blanc obtenues par électrolyse et par immersion à chaud et feuilles de fer noir,1983-12-01,1,['77.140.50'],ISO/TC 17,9599,,[20548],"['en','fr']",14,

5634,IS,,ISO 1111-2:1983,Single cold-reduced tinplate and single cold-reduced blackplate — Part 2: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form,"Fer-blanc et fer noir laminés à froid par simple réduction — Partie 2: Bobines de fer-blanc électrolytique et de fer noir, destinées au découpage ultérieur en feuilles",1983-12-01,2,['77.140.50'],ISO/TC 17,9599,,[20548],"['en','fr']",15,

19097,IS,,ISO 11110:1997,Winter-sports equipment — Test devices for the setting of the functional unit ski/boot/binding — Requirements and tests,Matériel de sports d'hiver — Dispositifs d'essai pour le réglage de l'unité fonctionnelle ski/chaussure/fixation — Exigences et essais,1997-05-08,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[63493],"['en','fr']",6,

29933,IS,,ISO 11111-1:2005,Textile machinery — Safety requirements — Part 1: Common requirements,Matériel pour l'industrie textile — Exigences de sécurité — Partie 1: Exigences communes,2005-02-21,1,['59.120.01'],ISO/TC 72/SC 8,9599,[1501],[54091],"['en','fr']",76,"<p>ISO 11111-1:2005 specifies safety requirements for frequently occurring hazards common to the types of textile machinery and the hazards of certain machine elements covered by ISO 11111-2 to ISO 11111-7. It is applicable to machinery plant and related equipment intended to be used in the textile industry for the following: opening, cleaning, blending, carding, preparation subsequent to carding, spinning and other processing of

54091,IS,,ISO 11111-1:2009,Textile machinery — Safety requirements — Part 1: Common requirements,Matériel pour l'industrie textile — Exigences de sécurité — Partie 1: Exigences communes,2009-07-06,2,['59.120.01'],ISO/TC 72/SC 8,9599,"[29933,46513]",[65561],"['en','fr']",74,"<p>ISO 11111-1:2009 specifies safety requirements for frequently occurring hazards common to the types of textile machinery and the hazards of certain machine elements covered by ISO 11111-2, ISO 11111-3, ISO 11111-4, ISO 11111-5, ISO 11111-6 and ISO 11111-7.</p><p>It is applicable to machinery plant and related equipment intended to be used in the textile industry for the following:</p><p>- the opening, cleaning, blendin

1501,IS,,ISO 11111:1995,Safety requirements for textile machinery,Exigences de sécurité pour le matériel textile,1995-09-28,1,['59.120.01'],ISO/TC 72/SC 8,9599,,"[29946,29935,29936,29933,29937,29934,29938]","['en','fr']",155,"<p>Intended for use by any person, concerned with the safety of textile machinery, for example textile machinery designers, manufacturers, users, system integrators and safety experts. Applicable to all textile machinery, plant and related equipment intended to be used in the textile industry for processing and finishing. Not applicable to machinery, plant and related equipment used for the manufacture of continous filaments, household and industrial textile goods, maki

19098,IS,,ISO 11113:1995,Cylinders for liquefied gases (excluding acetylene and LPG) — Inspection at time of filling,Bouteilles à gaz liquéfiés (à l'exception de l'acétylène et du GPL) — Contrôle au moment du remplissage,1995-08-31,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[37208],"['en','fr']",9,<p>Specifies the minimum requirements to verify the integrity of transportable gas cylinders for liquefied gases (excluding acetylene and liquefied petroleum gases) for continued use. These requirements reflect current practice and experience. Does not deal with manifolded bundles of cylinders or trailer cylinders.</p>

19099,IS,,ISO 11114-1:1997,Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials,Bouteilles à gaz transportables — Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux — Partie 1: Matériaux métalliques,1997-10-16,1,['23.020.35'],ISO/TC 58,9599,,[50504],"['en','fr']",43,

50504,IS,,ISO 11114-1:2012,Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials,Bouteilles à gaz — Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux — Partie 1: Matériaux métalliques,2012-03-16,2,['23.020.35'],ISO/TC 58,9599,[19099],[76081],"['en','fr']",47,"<p>ISO 11114-1:2012 provides requirements for the selection of safe combinations of metallic cylinder and valve materials and cylinder gas content.</p><p>The compatibility data given is related to single gases and to gas mixtures.</p><p>Seamless metallic, welded metallic and composite gas cylinders and their valves, used to contain compressed, lique

64586,IS,Amd,ISO 11114-1:2012/Amd 1:2017,Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials — Amendment 1,Bouteilles à gaz — Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux — Partie 1: Matériaux métalliques — Amendement 1,2017-01-12,2,['23.020.35'],ISO/TC 58,9599,,[76081],"['en','fr']",7,

33320,IS,,ISO 11114-2:2000,Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials,Bouteilles à gaz transportables — Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux — Partie 2: Matériaux non métalliques,2000-12-21,1,['23.020.35'],ISO/TC 58,9599,,[50505],"['en','fr']",16,

50505,IS,,ISO 11114-2:2013,Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials,Bouteilles à gaz — Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux — Partie 2: Matériaux non métalliques,2013-03-21,2,['23.020.35'],ISO/TC 58,9599,[33320],[77832],"['en','fr']",14,"<p>ISO 11114-2:2013 gives guidance in the selection and evaluation of compatibility between non-metallic materials for gas cylinders and valves and the gas contents. It also covers bundles, tubes and pressure drums.</p><p>ISO 11114-2:2013 can be helpful for composite and laminated materials used for gas cylinders.</p><p>It does not cover the

19101,IS,,ISO 11114-3:1997,Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 3: Autogenous ignition test in oxygen atmosphere,Bouteilles à gaz transportables — Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux — Partie 3: Essai d'auto-inflammation sous atmosphère d'oxygène,1997-10-16,1,['23.020.35'],ISO/TC 58,9599,,[50506],"['en','fr']",9,

41281,IS,,ISO 11114-4:2005,Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement,Bouteilles à gaz transportables — Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux — Partie 4: Méthodes d'essai pour le choix de matériaux métalliques résistants à la fragilisation par l'hydrogène,2005-08-19,1,['23.020.35'],ISO/TC 58,9599,,[64587],"['en','fr']",16,"<p>ISO 11114-4:2005 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l)

19103,IS,,ISO 11116-1:1999,Gas cylinders — 17E taper thread for connection of valves to gas cylinders — Part 1: Specifications,Bouteilles à gaz — Filetage conique 17E pour le raccordement des robinets sur les bouteilles à gaz — Partie 1: Spécifications,1999-03-25,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[50448],"['en','fr']",6,

19208,IS,,ISO 11116-2:1999,Gas cylinders — 17E taper thread for connection of valves to gas cylinders — Part 2: Inspection gauges,Bouteilles à gaz — Filetage conique 17E pour le raccordement des robinets sur les bouteilles à gaz — Partie 2: Calibres de vérification,1999-03-25,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[50449],"['en','fr']",14,

19104,IS,,ISO 11117:1998,"Gas cylinders — Valve protection caps and valve guards for industrial and medical gas cylinders — Design, construction and tests","Bouteilles à gaz — Chapeaux fermés et chapeaux ouverts de protection des robinets de bouteilles à gaz industriels et médicaux — Conception, construction et essais",1998-08-13,1,"['11.040.10','23.020.35']",ISO/TC 58/SC 2,9599,,[37772],"['en','fr']",9,

37772,IS,,ISO 11117:2008,"Gas cylinders — Valve protection caps and valve guards — Design, construction and tests","Bouteilles à gaz — Chapeaux fermés et chapeaux ouverts de protection des robinets — Conception, construction et essais",2008-08-26,2,"['11.040.10','23.020.35']",ISO/TC 58/SC 2,9599,[19104],[69934],"['en','fr']",10,"<p>ISO 11117:2007 specifies the requirements for valve protection caps and guards for gas cylinders.</p><p>ISO 11117:2007 defines tests for checking the mechanical strength and physical properties of the valve protection cap or valve guard.</p><p>ISO 11117:2007applies to protection devices for valves used on cylinders for liquefied, dissolved or compressed gases. It

54096,IS,Cor,ISO 11117:2008/Cor 1:2009,"Gas cylinders — Valve protection caps and valve guards — Design, construction and tests — Technical Corrigendum 1","Bouteilles à gaz — Chapeaux fermés et chapeaux ouverts de protection des robinets — Conception, construction et essais — Rectificatif technique 1",2009-05-05,2,"['11.040.10','23.020.35']",ISO/TC 58/SC 2,9599,,[69934],"['en','fr']",1,

19105,IS,,ISO 11118:1999,Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods,Bouteilles à gaz — Bouteilles à gaz métalliques non rechargeables — Spécifications et méthodes d'essai,1999-10-14,1,['23.020.35'],ISO/TC 58/SC 3,9599,,"[45767,43591]","['en','fr']",18,

45767,IS,,ISO 11118:2015,Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods,Bouteilles à gaz — Bouteilles à gaz métalliques non rechargeables — Spécifications et méthodes d'essai,2015-09-16,2,['23.020.35'],ISO/TC 58/SC 3,9599,"[21742,19105]",[85991],"['en','fr']",33,"<p>ISO 11118:2015 specifies minimum requirements for the material, design, inspections, construction and workmanship, manufacturing processes, and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed, or seamless construction for compressed and liquefied gases including the requirements for their non-refillable sealing devices and their methods of testing.</p><p>NOTE

75533,IS,Amd,ISO 11118:2015/Amd 1:2019,Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods — Amendment 1,Bouteilles à gaz — Bouteilles à gaz métalliques non rechargeables — Spécifications et méthodes d'essai — Amendement 1,2019-10-25,2,['23.020.35'],ISO/TC 58/SC 3,9599,,[85991],"['en','fr']",5,

32872,IS,,ISO 11119-1:2002,Gas cylinders of composite construction — Specification and test methods — Part 1: Hoop wrapped composite gas cylinders,Bouteilles à gaz composites — Spécifications et méthodes d'essai — Partie 1: Bouteilles à gaz frettées en matériau composite,2002-05-30,1,['23.020.35'],ISO/TC 58/SC 3,9599,,[50555],['en'],29,"<p>ISO 11119-1 specifies requirements for composite gas cylinders up to and including 450 litres water capacity, for the storage and conveyance of compressed or liquefied gases with test pressures up to and including 650 bar. The cylinders are constructed in the form of a seamless metallic liner over-wrapped with carbon fibre or aramid fibre or glass fibre (o

50555,IS,,ISO 11119-1:2012,"Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l","Bouteilles à gaz — Bouteilles à gaz rechargeables en matériau composite et tubes — Conception, construction et essais — Partie 1: Bouteilles à gaz frettées en matériau composite renforcé par des fibres et tubes d'une contenance allant jusqu'à 450 l",2012-07-25,2,['23.020.35'],ISO/TC 58/SC 3,9599,[32872],[75815],['en'],29,"<p>ISO 11119-1:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compresse

35680,IS,,ISO 11119-2:2002,Gas cylinders of composite construction — Specification and test methods — Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners,Bouteilles à gaz composites — Spécifications et méthodes d'essai — Partie 2: Bouteilles à gaz composites entièrement bobinées renforcées par des liners métalliques transmettant la charge,2002-05-30,1,['23.020.35'],ISO/TC 58/SC 3,9599,,[43590],['en'],29,"<p>ISO 11119-2 specifies requirements for composite gas cylinders up to and including 450 litres water capacity, for the storage and conveyance of compressed or liquefied gases with test pressures up to and including 650 bar. The cylinders are constr

43590,IS,,ISO 11119-2:2012,"Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners","Bouteilles à gaz — Bouteilles à gaz rechargeables en matériau composite et tubes — Conception, construction et essais — Partie 2: Bouteilles à gaz composites entièrement bobinées renforcées par des fibres et tubes d'une contenance allant jusqu'à 450 l avec liners métalliques transmettant la charge",2012-07-13,2,['23.020.35'],ISO/TC 58/SC 3,9599,[35680],[75816],['en'],30,"<p>ISO 11119-2:2012 specifies requirements for composite gas cylinders and tubes b

63327,IS,Amd,ISO 11119-2:2012/Amd 1:2014,"Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners — Amendment 1","Bouteilles à gaz — Bouteilles à gaz rechargeables en matériau composite et tubes — Conception, construction et essais — Partie 2: Bouteilles à gaz composites entièrement bobinées renforcées par des fibres et tubes d'une contenance allant jusqu'à 450 l avec liners métalliques transmettant la charge — Amendement 1",2014-08-11,2,['23.020.35'],ISO/TC 58/SC 3,9599,,[75816],['en'],2,

27623,IS,,ISO 11119-3:2002,Gas cylinders of composite construction — Specification and test methods — Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners,Bouteilles à gaz composites — Spécifications et méthodes d'essai — Partie 3: Bouteilles à gaz composites entièrement bobinées renforcées par des liners métalliques ou des liners non métalliques ne transmettant pas la charge,2002-09-19,1,['23.020.35'],ISO/TC 58/SC 3,9599,,[50523],"['en','fr']",33,"<p>ISO 11119-3 specifies requirements for composite gas cylinders up to and including<i> </i>450 l water capacity, for the storage and conveyance of compressed or liquefied gases with

50523,IS,,ISO 11119-3:2013,"Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners","Bouteilles à gaz — Bouteilles à gaz rechargeables en matériau composite et tubes — Conception, construction et essais — Partie 3: Bouteilles à gaz composites entièrement bobinées renforcées par des fibres et tubes d'une contenance allant jusqu'à 450 l avec liners métalliques ou non métalliques ne transmettant pas la charge",2013-04-17,2,['23.020.35'],ISO/TC 58/SC 3,9599,[27623],[75817],['en'],40,"<p>ISO 11119-3:2013 specifies requ

5635,IS,,ISO 1112:1974,Horology — Functional and non-functional jewels,Horlogerie — Pierres fonctionnelles et non fonctionnelles,1974-10-01,1,['39.040.01'],ISO/TC 114,9599,,[25349],"['en','fr']",2,

25349,IS,,ISO 1112:1999,Horology — Functional and non-functional jewels,Horlogerie — Pierres fonctionnelles et non fonctionnelles,1999-08-19,2,"['01.040.39','39.040.01']",ISO/TC 114,9599,[5635],[50884],"['en','fr']",4,

19107,IS,,ISO 11120:1999,"Gas cylinders — Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l — Design construction and testing","Bouteilles à gaz — Tubes en acier sans soudure rechargeables d'une contenance en eau de 150 l à 3000 l pour le transport des gaz comprimés — Conception, construction et essais",1999-03-25,1,['23.020.35'],ISO/TC 58/SC 3,9599,,[43592],"['en','fr']",30,

57321,IS,Amd,ISO 11120:1999/Amd 1:2013,"Gas cylinders — Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l — Design construction and testing — Amendment 1: Requirements for design of tubes for embrittling gases","Bouteilles à gaz — Tubes en acier sans soudure rechargeables d'une contenance en eau de 150 l à 3000 l pour le transport des gaz comprimés — Conception, construction et essais — Amendement 1: Exigences de conception des tubes destinés aux gaz fragilisants",2013-07-15,1,['23.020.35'],ISO/TC 58/SC 3,9599,,[43592],"['en','fr']",1,

50109,IS,,ISO 11121:2009,Recreational diving services — Requirements for introductory training programmes to scuba diving,Services relatifs à la plongée de loisirs — Exigences pour les programmes d'introduction à la plongée subaquatique,2009-06-09,1,"['03.200.99','03.080.30']",ISO/TC 228,9599,,[68275],['en'],7,"<p>ISO 11121:2009 specifies minimum requirements for training organizations that offer introductory scuba experience training programmes to non-divers.</p><p>ISO 11121:2009 applies to programmes that include participants being taken into an open water environment. It does not apply to programmes that are exclusively conducted in a confined water environment (e.g. swimming pools).</p><

19110,IS,,ISO 11124-1:1993,Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 1: General introduction and classification,Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Spécifications pour abrasifs métalliques destinés à la préparation par projection — Partie 1: Introduction générale et classification,1993-12-02,1,['25.220.10'],ISO/TC 35/SC 12,9599,,[66704],"['en','fr']",5,"<p>Describes a classification and specifies the characteristics which are required for the complete designation of such abrasives. Applies to abrasives supplied in the 'new' or unused

19111,IS,,ISO 11124-2:1993,Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chilled-iron grit,Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Spécifications pour abrasifs métalliques destinés à la préparation par projection — Partie 2: Grenaille angulaire en fonte trempée,1993-12-02,1,['25.220.10'],ISO/TC 35/SC 12,9599,,[66705],"['en','fr']",6,"<p>Specifies requirements for 12 grades of chilled-iron grit abrasive: designation, sampling, package identification and lot traceability, information to be supplied by the manufacturer or supplier, ranges of

19112,IS,,ISO 11124-3:1993,Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-carbon cast-steel shot and grit,Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Spécifications pour abrasifs métalliques destinés à la préparation par projection — Partie 3: Grenaille ronde et angulaire en acier coulé à haut carbone,1993-12-02,1,['25.220.10'],ISO/TC 35/SC 12,9599,,[66706],"['en','fr']",8,"<p>Specifies requirements for 14 grades of high-carbon cast-steel shot and 12 grades of high-carbon cast-steel grit abrasive: designation, sampling, package identificat

19113,IS,,ISO 11124-4:1993,Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 4: Low-carbon cast-steel shot,Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Spécifications pour abrasifs métalliques destinés à la préparation par projection — Partie 4: Grenaille ronde en acier coulé à bas carbone,1993-12-02,1,['25.220.10'],ISO/TC 35/SC 12,9599,,[66707],"['en','fr']",6,"<p>Specifies requirements for 12 grades of low-carbon cast-steel shot abrasive: designation, sampling, package identification and lot traceability, information to be supplied by the manufactur

19115,IS,,ISO 11125-1:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling,Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection — Partie 1: Échantillonnage,1993-12-09,1,['25.220.10'],ISO/TC 35/SC 12,9599,,[66697],"['en','fr']",4,<p>Specifies a method for the sampling from consignments and for the subdivision of the sample into quantities suitable for undertaking the appropriate test methods specified in other parts of ISO 11125.</p>

19116,IS,,ISO 11125-2:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution,Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection — Partie 2: Analyse granulométrique,1993-12-09,1,['25.220.10'],ISO/TC 35/SC 12,9599,,[66698],"['en','fr']",4,"<p>Specifies a test method for the determination of particle size distribution by sieving. The procedure includes weighing out a test portion of 100 g of the sample, placing the test portion in th

19117,IS,,ISO 11125-3:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 3: Determination of hardness,Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection — Partie 3: Détermination de la dureté,1993-12-09,1,['25.220.10'],ISO/TC 35/SC 12,9599,,[66699],"['en','fr']",4,"<p>Specifies a test method for the determination of the Vickers hardness (using a test force of 9,807 N, i.e. HV 1, when testing particles with a diameter greater than 0,5 mm, and a test force of 4,904 N, i.e. H

19118,IS,,ISO 11125-4:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 4: Determination of apparent density,Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection — Partie 4: Détermination de la masse volumique apparente,1993-12-09,1,['25.220.10'],ISO/TC 35/SC 12,9599,,[66700],"['en','fr']",3,<p>Specifies a test method for the determination of apparent density using a pyknometer. The purpose is to establish the soundness of the metallic abrasive. Significant levels of intern

19119,IS,,ISO 11125-5:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 5: Determination of percentage defective particles and of microstructure,Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection — Partie 5: Détermination du pourcentage de particules défectueuses et de la microstructure,1993-12-09,1,['25.220.10'],ISO/TC 35/SC 12,9599,,[66701],"['en','fr']",4,"<p>Specifies a test method for the determination of particles with cracks, laminations, voids and shrinkage, of de

66701,IS,,ISO 11125-5:2018,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 5: Determination of percentage defective particles and of microstructure,Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection — Partie 5: Détermination du pourcentage de particules défectueuses et de la microstructure,2018-08-23,2,['25.220.10'],ISO/TC 35/SC 12,9599,[19119],[87229],"['en','fr']",5,<p>This document specifies test methods for the determination of the percentage of defective particles and o