Withdrawn and superseded ISO standards — page 139 of 246

12256,IS,,ISO 6056:1987,"Rubber, vulcanized or thermoplastic — Determination of compression stress relaxation (rings)",Coutchouc vulcanisé ou thermoplastique — Détermination de la relaxation de contrainte en compression (anneaux),1987-03-26,2,['83.060'],ISO/TC 45/SC 2,9599,[12255],[8679],"['en','fr']",4,

4719,IS,,ISO 606:1982,Short-pitch transmission precision roller chains and chain wheels,Chaînes de transmission de précision à rouleaux à pas courts et roues dentées correspondantes,1982-12-01,1,['21.220.30'],ISO/TC 100,9599,,[4720],"['en','fr']",14,

4720,IS,,ISO 606:1994,Short-pitch transmission precision roller chains and chain wheels,Chaînes de transmission de précision à rouleaux à pas courts et roues dentées correspondantes,1994-02-10,2,['21.220.30'],ISO/TC 100,9599,[4719],"[38940,24674]","['en','fr']",17,"<p>Specifies requirements for short-pitch precision roller chains of simple and multiplex construction suitable for the mechanical transmission of power and allied applications, together with those for their associated chain wheels. Covers dimensions, tolerances, length measurement, proof testing and minimum tensile strengths. Although it applies to chain wheels for cycles and motor cycles, it does not apply to chains for cycles a

38940,IS,,ISO 606:2004,"Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets","Chaînes de transmission de précision à rouleaux et à douilles, plaques-attaches et roues dentées correspondantes",2004-03-12,3,['21.220.30'],ISO/TC 100,9599,"[4720,5980,5981]",[61232],"['en','fr']",28,"<p>ISO 606:2004 specifies the characteristics of short-pitch precision roller and bush chains with associated sprockets suitable for the mechanical transmission of power and allied applications. It covers dimensions, tolerances, length measurement, preloading, minimum tensile strengths and minimum dynamic strength. Although applicable to chain sprockets for cycles and

44023,IS,Cor,ISO 606:2004/Cor 1:2006,"Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets — Technical Corrigendum 1","Chaînes de transmission de précision à rouleaux et à douilles, plaques-attaches et roues dentées correspondantes — Rectificatif technique 1",2006-04-20,3,['21.220.30'],ISO/TC 100,9599,,[61232],"['en','fr']",3,

12259,IS,,ISO 6060:1986,Water quality — Determination of the chemical oxygen demand,Qualité de l'eau — Détermination de la demande chimique en oxygène,1986-06-19,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[12260],"['en','fr']",,

12268,IS,,ISO 6067:1985,Shipbuilding and marine structures — Winches for lifeboats,Construction navale et structures maritimes — Treuils pour embarcations de sauvetage,1985-02-21,1,['47.020.50'],ISO/TC 8/SC 1,9599,,[43845],"['en','fr']",5,"<p>Specifies the requirements for design, construction, safety, performance and acceptance testing of winches for lifeboats, used for manual, gravity or stored mechanical power launching, recovery and storage of it. Does not include requirements for the prime mover (if any).</p>"

12270,IS,,ISO 6070:1981,Auxiliary tables for vibration generators — Methods of describing equipment characteristics,Tables auxiliaires pour générateurs de vibrations — Méthodes de description des caractéristiques,1981-07-01,1,['17.160'],ISO/TC 108/SC 6,9599,,[74392],"['en','fr']",10,<p>Applies to tables associated with one or several generators working along axes which are parallel to the longitudinal axis of the table. Deals with several types of tables. Provides three levels of description to be used in describing test equipment.</p>

44801,IS,Cor,ISO 6070:1981/Cor 1:2006,Auxiliary tables for vibration generators — Methods of describing equipment characteristics — Technical Corrigendum 1,Tables auxiliaires pour générateurs de vibrations — Méthodes de description des caractéristiques — Rectificatif technique 1,2006-09-19,1,['17.160'],ISO/TC 108/SC 6,9599,,[74392],"['en','fr']",2,

12272,IS,,ISO 6072:1986,Hydraulic fluid power — Compatibility between elastomeric materials and fluids,Transmissions hydrauliques — Compatibilité des fluides avec les caoutchoucs,1986-12-04,1,"['23.100.01','23.100.60']",ISO/TC 131/SC 7,9599,,[27959],"['en','fr']",14,"<p>Provides formulations, mixing and vulcanization procedures for three types of elastomeric compositions: acrylonitrilebutadiene rubber (NBR 1); fluoroelastomers (FPM 1); ethylene propylene diene rubber (EPDM 1). The normative annex A gives a prediction of percentage change in volume of commercial rubbers in mineral-based oils. The normative annex B gives a rapid method for indicating the effect of mineral-based oils on elastom

27959,IS,,ISO 6072:2002,Hydraulic fluid power — Compatibility between fluids and standard elastomeric materials,Transmissions hydrauliques — Compatibilité des fluides avec les caoutchoucs normalisés,2002-03-07,2,"['83.140.01','23.100.01']",ISO/TC 131/SC 7,9599,[12272],[53353],"['en','fr']",20,

12273,IS,,ISO 6073:1980,Hydraulic fluid power — Petroleum fluids — Prediction of bulk moduli,Transmissions hydrauliques — Huiles minérales — Détermination des modules de compressibilité volumique,1980-11-01,1,['75.120'],ISO/TC 28,9599,,[26623],"['en','fr']",9,

12277,IS,,ISO 6077:1980,Photography — Determination of brittleness of photographic film — Wedge brittleness test,Photographie — Détermination de la fragilité à la flexion des films photographiques — Essai par la méthode dite 'du coin',1980-03-01,1,['37.040.20'],ISO/TC 42,9599,,[12278],"['en','fr']",5,

12278,IS,,ISO 6077:1993,Photography — Photographic films and papers — Wedge test for brittleness,Photographie — Films et papiers photographiques — Détermination de la méthode dite 'du coin',1993-01-28,2,['37.040.20'],ISO/TC 42,9599,[12277],[31931],['en'],6,

12280,IS,,ISO 6079:1990,Instant tea in solid form — Specification,Thé soluble sous forme solide — Spécifications,1990-09-20,1,['67.140.10'],ISO/TC 34/SC 8,9599,,[80197],"['en','fr']",2,

12281,IS,,ISO 6081:1986,Acoustics — Noise emitted by machinery and equipment — Guidelines for the preparation of test codes of engineering grade requiring noise measurements at the operator's or bystander's position,Acoustique — Bruit émis par les machines et matériels — Directives pour la rédaction des codes d'essais de la classe 'expertise' comportant la mesure du bruit aux postes de conduite ou aux postes de l'assistant,1986-12-17,1,['17.140.20'],ISO/TC 43/SC 1,9599,,[21252],"['en','fr']",9,

4723,IS,,ISO 609:1975,Coal and coke — Determination of carbon and hydrogen — High temperature combustion method,Charbon et coke — Dosage du carbone et de l'hydrogène — Méthode par combustion à haute température,1975-01-01,1,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,,[4724],"['en','fr']",7,

4724,IS,,ISO 609:1996,Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method,Combustibles minéraux solides — Dosage du carbone et de l'hydrogène — Méthode par combustion à haute température,1996-02-15,2,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,[4723],[86980],['en'],11,"<p>Specifies a method of the determination of the total carbon and the total hydrogen of hard coal, brown coal, lignite and coke by a high temperature combustion method.</p>"

27351,IS,Cor,ISO 609:1996/Cor 1:1996,Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method — Technical Corrigendum 1,Combustibles minéraux solides — Dosage du carbone et de l'hydrogène — Méthode par combustion à haute température — Rectificatif technique 1,1996-07-04,2,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,,[86980],['en'],1,

12283,IS,,ISO 6091:1980,Dried milk — Determination of titratable acidity (Reference method),Lait sec — Détermination de l'acidité titrable (Méthode de référence),1980-10-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[55777],"['en','fr']",2,"<p>Applies to all types of dried milk. The principle constitutes in preparing reconstituted milk by adding water to a test portion of dried milk. The reconstituted milk is then titrated with sodium hydroxide solution to the pH of 8,40. The number of millimetres used in the titration is multiplied by the factor 2 in order to obtain the number of millimetres required to titrate a quantity of milk corresponding to 10 g of solids-not-fat to the pH of 8,50.</p>" 122

12289,IS,,ISO 6097:1983,Agricultural tractors and self-propelled machines — Performance of heating and ventilation systems in closed cabs — Method of test,Tracteurs et machines automotrices agricoles — Performance des systèmes de chauffage et de ventilation dans les cabines fermées — Méthode d'essai,1983-06-01,1,['65.060.01'],ISO/TC 23/SC 3,9599,,[12290],"['en','fr']",6,

12290,IS,,ISO 6097:1989,Tractors and self-propelled machines for agriculture — Performance of heating and ventilation systems in closed cabs — Test method,Tracteurs et machines automotrices agricoles — Performance des systèmes de chauffage et de ventilation dans les cabines fermées — Méthode d'essai,1989-10-05,2,['65.060.01'],ISO/TC 23/SC 2,9599,[12289],"[26556,26553,24038,26554,26555]","['en','fr']",6,

12291,IS,,ISO 6098:1982,"Information processing — Self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape","Traitement de l'information — Cartouches à chargement automatique pour bande magnétique de 12,7 mm (0,5 in) de large",1982-12-01,1,['35.220.23'],ISO/IEC JTC 1,9599,,[12292],"['en','fr']",11,

12293,IS,,ISO 6099:1982,Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types,Transmissions hydrauliques et pneumatiques — Vérins — Code d'identification des dimensions de montage et des modes de fixation,1982-12-01,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[12294],"['en','fr']",45,

12294,IS,,ISO 6099:1985,Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types,Transmissions hydrauliques et pneumatiques — Vérins — Code d'identification des dimensions de montage et des modes de fixation,1985-09-26,2,['23.100.20'],ISO/TC 131/SC 3,9599,[12293],[12295],"['en','fr']",45,"<p>Specifies a conventional system for identifying cylinder dimensions and mounting dimensions thereof. Such a system will be composed of: a letter code for identifying mounting dimensions, envelope dimensions, cylinder fitting dimensions; a code for identifying cylinder mounting types. Although presents a code and a method of dimensioning (illustrated

12295,IS,,ISO 6099:2001,Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types,Transmissions hydrauliques et pneumatiques — Vérins — Code d'identification des dimensions de montage et des modes de fixation,2001-09-20,3,['23.100.20'],ISO/TC 131/SC 3,9599,[12294],[43399],"['en','fr']",59,

43399,IS,,ISO 6099:2009,Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types,Transmissions hydrauliques et pneumatiques — Vérins — Code d'identification des dimensions de montage et des modes de fixation,2009-03-23,4,['23.100.20'],ISO/TC 131/SC 3,9599,[12295],[69737],"['en','fr']",69,"<p>ISO 6099:2009 establishes a convention for the identification of mounting dimensions and types used in the mounting of fluid power cylinders. It specifies a code for identifying cylinder mounting, envelope, accessory and connector dimensions, and for cylinder mounting and accessory types. It does not represent a standard list of all fluid power cylin

3699,IS,,ISO 61:1976,Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel,Matières plastiques — Détermination de la masse volumique apparente des matières à mouler non susceptibles de s'écouler à travers un entonnoir donné,1976-06-01,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[85748],"['en','fr']",1,"<p>A portion of 60 g of loose moulding material is dropped little by little into a measuring cylinder as evenly distributed as possible. A plunger with specified mass fitting to the measuring cylinder is slowly lowered until it is entirely supported by the material. After 1 min the volume of the material with the plunger resting upon it, shal

4725,IS,,ISO 610:1979,High-tensile steel chains (round link) for chain conveyors and coal ploughs,Chaînes en acier à haute résistance à la traction (à maillons ronds) pour convoyeurs à chaîne et rabots à charbon,1979-11-01,1,"['53.040.20','73.100.40']",ISO/TC 82,9599,,[4726],"['en','fr']",19,

12297,IS,,ISO 6101-1:1981,Rubber — Determination of metal content — Flame atomic absorption spectrometric method — Part 1: Determination of zinc content,Caoutchouc — Dosage du métal — Méthode par spectrométrie d'absorption atomique dans la flamme — Partie 1: Dosage du zinc,1981-12-01,1,['83.060'],ISO/TC 45,9599,,[12298],"['en','fr']",4,

12298,IS,,ISO 6101-1:1991,Rubber — Determination of metal content by atomic absorption spectrometry — Part 1: Determination of zinc content,Caoutchouc — Dosage du métal par spectrométrie d'absorption atomique — Partie 1: Dosage du zinc,1991-10-17,2,['83.060'],ISO/TC 45/SC 2,9599,[12297],[72792],"['en','fr']",6,"<p>Applies to raw rubber and rubber products having zinc contents at a minimum of 0,05 %. This second edition cancels and replaces the first edition (1981). Annex A forms an integral part of this standard.</p>"

12299,IS,,ISO 6101-2:1986,Rubber — Determination of metal content — Flame atomic absorption spectrometric method — Part 2: Determination of lead content,Caoutchouc — Détermination de la teneur en métal — Méthode par spectrométrie d'absorption atomique dans la flamme — Partie 2: Dosage du plomb,1986-10-30,1,['83.060'],ISO/TC 45,9599,,[20152],"['en','fr']",6,

20152,IS,,ISO 6101-2:1997,Rubber — Determination of metal content by atomic absorption spectrometry — Part 2: Determination of lead content,Caoutchouc — Détermination de la teneur en métal par spectrométrie d'absorption atomique — Partie 2: Dosage du plomb,1997-05-29,2,['83.060'],ISO/TC 45/SC 2,9599,[12299],[77432],"['en','fr']",9,

12300,IS,,ISO 6101-3:1988,Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content,Caoutchouc — Dosage du métal par spectrométrie d'absorption atomique — Partie 3: Dosage du cuivre,1988-12-29,1,['83.060'],ISO/TC 45,9599,,[24253],"['en','fr']",5,

24253,IS,,ISO 6101-3:1997,Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content,Caoutchouc — Détermination de la teneur en métal par spectrométrie d'absorption atomique — Partie 3: Dosage du cuivre,1997-05-29,2,['83.060'],ISO/TC 45/SC 2,9599,[12300],[63605],"['en','fr']",9,

63605,IS,,ISO 6101-3:2014,Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content,Caoutchouc — Détermination de la teneur en métal par spectrométrie d'absorption atomique — Partie 3: Dosage du cuivre,2014-07-22,3,['83.060'],ISO/TC 45/SC 2,9599,[24253],[80470],"['en','fr']",11,"<p>ISO 6101-3:2014 specifies an atomic absorption spectrometric method for the determination of the copper content of rubbers. The method is applicable to raw rubber and rubber products having copper contents above 1 ppm. Copper contents below this limit can be determined, provided that suitable adjustments are made to the mass of the test portion and/or to th

12301,IS,,ISO 6101-4:1988,Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content,Caoutchouc — Dosage du métal par spectrométrie d'absorption atomique — Partie 4: Dosage du manganèse,1988-12-29,1,['83.060'],ISO/TC 45,9599,,[24254],"['en','fr']",5,

24254,IS,,ISO 6101-4:1997,Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content,Caoutchouc — Détermination de la teneur en métal par spectrométrie d'absorption atomique — Partie 4: Dosage du manganèse,1997-05-29,2,['83.060'],ISO/TC 45/SC 2,9599,[12301],[63606],"['en','fr']",9,

63606,IS,,ISO 6101-4:2014,Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content,Caoutchouc — Détermination de la teneur en métal par spectrométrie d'absorption atomique — Partie 4: Dosage du manganèse,2014-07-22,3,['83.060'],ISO/TC 45/SC 2,9599,[24254],[80471],"['en','fr']",11,"<p>ISO 6101-4:2014 specifies an atomic absorption spectrometric method for the determination of the manganese content of rubbers. The method is applicable to raw rubber and rubber products having manganese content above 0,5 ppm. Manganese contents below this limit can be determined, provided that suitable adjustments are made to the mass of the test port

12302,IS,,ISO 6101-5:1990,Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content,Caoutchouc — Dosage du métal par spectrométrie d'absorption atomique — Partie 5: Dosage du fer,1990-09-27,1,['83.060'],ISO/TC 45/SC 2,9599,,[43684],"['en','fr']",4,

43684,IS,,ISO 6101-5:2006,Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content,Caoutchouc — Dosage du métal par spectrométrie d'absorption atomique — Partie 5: Dosage du fer,2006-10-12,2,['83.060'],ISO/TC 45/SC 2,9599,[12302],[68115],"['en','fr']",6,"<p>ISO 6101-5:2006 specifies an atomic absorption spectrometric method for the determination of the iron content of rubbers.</p><p>It is applicable to raw rubber, rubber products and latex having iron contents of 5,0 mg/kg to 1 000 mg/kg. Higher concentrations may be determined, provided that suitable adjustments are made to the mass of the test portion and/or the concentrations of the

59440,IS,,ISO 6101-6:2011,Rubber — Determination of metal content by atomic absorption spectrometry — Part 6: Determination of magnesium content,Caoutchouc — Dosage du métal par spectrométrie d'absorption atomique — Partie 6: Dosage du magnésium,2011-11-09,1,['83.060'],ISO/TC 45/SC 2,9599,,[72793],['en'],8,"<p>ISO 6101-6:2011 specifies an atomic absorption spectrometric method for the determination of the magnesium content of natural rubber latex concentrate, raw natural rubber and products made from natural rubber.</p>"

12303,IS,,ISO 6103:1986,Bonded abrasive products — Static balancing of grinding wheels — Testing,Produits abrasifs agglomérés — Équilibrage statique des meules — Contrôle,1986-12-18,1,['25.100.70'],ISO/TC 29/SC 5,9599,,[21895],"['en','fr']",5,

21895,IS,,ISO 6103:1999,Bonded abrasive products — Permissible unbalances of grinding wheels as delivered — Testing,Produits abrasifs agglomérés — Déséquilibre admissible des meules en état de livraison — Contrôle,1999-10-21,2,['25.100.70'],ISO/TC 29/SC 5,9599,[12303],[36549],"['en','fr']",8,

36549,IS,,ISO 6103:2005,Bonded abrasive products — Permissible unbalances of grinding wheels as delivered — Static testing,Produits abrasifs agglomérés — Balourds admissibles des meules en état de livraison — Contrôle statique,2005-04-04,3,['25.100.70'],ISO/TC 29/SC 5,9599,[21895],[60013],"['en','fr','ru']",7,"<p>ISO 6103:2005 specifies the maximum permissible values of unbalances for various grinding wheels of ISO 603-1 to ISO 603-9 and ISO 603-12 to ISO 603-16 in the as-delivered condition, with an outside diameter greater than 115 mm and maximum operating speed greater than or equal to 16 m/s. It also specifies the method for measuring the unbalance and the practical method for testing wh

12304,IS,,ISO 6104:1979,"Abrasive products — Diamond or cubic boron nitride grinding wheels and saws — General survey, designation and multilingual nomenclature","Produits abrasifs — Meules et scies à base de diamant ou de nitrure de bore — Généralités, désignation et nomenclature multilingue",1979-04-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,,[36553],"['en','fr']",15,"<p>Gives a general survey of standardized grinding wheels and saws the sizes of which are the subject of ISO 6168 and ISO 6105 respectively. Contains a code of designation for grinding wheel and saw forms. Specified in addition to terms in English, French and Russian the equivalent terms in German, Italian, Dutch and Swedish.</p>

12305,IS,,ISO 6105:1988,Abrasive products — Segmented saws for machining of stone and masonry cutting — Dimensions of steel blades,Produits abrasifs — Scies segmentées pour l'usinage de la pierre et des matériaux de construction — Dimensions du corps en acier,1988-06-09,1,['25.100.70'],ISO/TC 29/SC 5,9599,,"[28468,35933,35934]","['en','fr']",5,"<p>Applies to diamond or cubic boron nitride saws, the multilingual nomenclature and designation of which are specified in ISO 6104. The diamond or cubic boron nitride concentration and the grain size of the diamond section of the saws be specified in confomity with ISO 6104 and ISO 6106 respectively.</p>"

12306,IS,,ISO 6106:1979,Abrasive products — Grain sizes of diamond or cubic boron nitride,Produits abrasifs — Dimensions des grains de diamant ou de nitrure de bore,1979-07-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,,[28477],"['en','fr']",6,"<p>Establishes a method for checking the grain size of diamond or cubic boron nitride as used for the manufacture of industrial products. Applies to grains of particle size between 41 and 1 180 um. Gives the grit size designation, the size limits, the sieves to be used in determining them and the procedure to be adpted for checking the size.</p>"

28477,IS,,ISO 6106:2005,Abrasive products — Checking the grit size of superabrasives,Produits abrasifs — Vérification de la dimension des grains de superabrasifs,2005-05-23,2,['25.100.70'],ISO/TC 29/SC 5,9599,[12306],[56014],"['en','fr','ru']",10,"<p>ISO 6106:2005 specifies a method for determining or checking the grit size of superabrasives (diamond or cubic boron nitride) as used for the manufacture of industrial products such as grinding wheels and saws. It describes the grit size designations, the size limits, the sieves to be used in determining them and the procedure to be adopted for checking the grit size exclusive of any coating.</p>"

12307,IS,,ISO 6107-1:1980,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1980-10-01,1,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,,[12308],"['en','fr','ru']",18,

12308,IS,,ISO 6107-1:1986,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1986-09-04,2,"['01.040.13','13.060']",ISO/TC 147/SC 1,9599,[12307],[12309],"['en','fr','ru']",18,

12309,IS,,ISO 6107-1:1996,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1996-02-01,3,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12308],[37669],"['en','fr','ru']",29,<p>Defines a list of terms used in certain fields of water quality characterization. Replaces the first edition.</p>

37669,IS,,ISO 6107-1:2004,Water quality — Vocabulary — Part 1:,Qualité de l'eau — Vocabulaire — Partie 1:,2004-02-02,4,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12309],[67643],"['en','fr','ru']",29,<p>ISO 6107-1:2004 defines terms used in certain fields of water quality characterization. </p>

12310,IS,,ISO 6107-2:1981,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1981-12-01,1,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,,[12311],"['en','fr','ru']",33,

12311,IS,,ISO 6107-2:1989,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1989-05-25,2,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12310],[24839],"['en','fr','ru']",31,

24839,IS,,ISO 6107-2:1997,Water quality — Vocabulary — Part 2:,Qualité de l'eau — Vocabulaire — Partie 2:,1997-06-19,3,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12311],"[41238,39253]","['en','fr']",23,

41238,IS,,ISO 6107-2:2006,Water quality — Vocabulary — Part 2:,Qualité de l'eau — Vocabulaire — Partie 2:,2006-04-27,4,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[24839],[67643],"['en','fr','ru']",63,ISO 6107-2:2006 defines terms used in certain fields of water quality characterization.

57506,IS,Amd,ISO 6107-2:2006/Amd 1:2012,Water quality — Vocabulary — Part 2: — Amendment 1,Qualité de l'eau — Vocabulaire — Partie 2: — Amendement 1,2012-06-25,4,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,,[67643],"['en','fr','ru']",43,

12312,IS,,ISO 6107-3:1985,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1985-11-14,1,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,,[12313],"['en','fr','ru']",23,

12313,IS,,ISO 6107-3:1993,Water quality — Vocabulary — Part 3:,Qualité de l'eau — Vocabulaire — Partie 3:,1993-06-10,2,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12312],"[67643,32237]","['de','en','fr','ru']",22,"<p>Defines, in the English alphabetic order, a third list of 95 terms in English, French, Russian, German used in certain fields of water quality characterization. Alphabetical indexes in French, Russian and German are given. However, only the terms and definitions in the official languages (English, French and Russian) can be considered as ISO terms and definitions.</p>"

32405,IS,Amd,ISO 6107-3:1993/Amd 1:2001,Water quality — Vocabulary — Part 3: — Amendment 1,Qualité de l'eau — Vocabulaire — Partie 3: — Amendement 1,2001-12-20,2,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,,[67643],"['en','fr','ru']",20,

12314,IS,,ISO 6107-4:1984,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1984-11-01,1,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,,[12315],"['en','fr','ru']",5,

12315,IS,,ISO 6107-4:1993,Water quality — Vocabulary — Part 4:,Qualité de l'eau — Vocabulaire — Partie 4:,1993-05-20,2,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12314],"[67643,32242]","['de','en','fr','ru']",8,"<p>Defines, in the English alphabetic order, a fourth list of 18 terms in English, French, Russian, German used in certain fields of water quality characterization. Alphabetical indexes in French, Russian and German are given. However, only the terms and definitions in the official languages (English, French and Russian) can be considered as ISO terms and definitions.</p>"

12316,IS,,ISO 6107-5:1986,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1986-06-12,1,"['01.040.13','13.060']",ISO/TC 147/SC 1,9599,,[12317],"['en','fr','ru']",14,

12317,IS,,ISO 6107-5:1996,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1996-02-01,2,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12316],[37845],"['en','fr','ru']",20,<p>Defines a fifth list of terms used in certain fields of water quality characterization. Replaces the first edition.</p>

37845,IS,,ISO 6107-5:2004,Water quality — Vocabulary — Part 5:,Qualité de l'eau — Vocabulaire — Partie 5:,2004-01-13,3,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12317],[67643],"['en','fr','ru']",22,<p>ISO 6107-5:2004 defines terms used in certain fields of water quality characterization. </p>

12318,IS,,ISO 6107-6:1986,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1986-12-11,1,"['01.040.13','13.060']",ISO/TC 147/SC 1,9599,,[12319],"['en','fr','ru']",14,

12319,IS,,ISO 6107-6:1996,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1996-02-01,2,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12318],[38793],"['en','fr','ru']",18,<p>Defines a sixth list of terms used in certain fields of water quality characterization. Replaces the first edition.</p>

38793,IS,,ISO 6107-6:2004,Water quality — Vocabulary — Part 6:,Qualité de l'eau — Vocabulaire — Partie 6:,2004-07-02,3,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12319],[67643],"['en','fr','ru']",46,"<p>ISO 6107-6:2004 defines terms used in certain fields of water quality characterization.</p><p>In addition to the terms and definitions in the three official ISO languages (English, French and Russian), ISO 6107-6:2004 gives the equivalent terms and their definitions in the German language; these are published under the responsibility of the member bodies of Germany (DIN), Austria (ON) and Switzerland (SNV). However, only the terms and definitions given in the official languages can be

12320,IS,,ISO 6107-7:1990,Water quality — Vocabulary,Qualité de l'eau — Vocabulaire,1990-09-20,1,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,,[27399],"['en','fr','ru']",16,

27399,IS,,ISO 6107-7:1997,Water quality — Vocabulary — Part 7:,Qualité de l'eau — Vocabulaire — Partie 7:,1997-06-19,2,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[12320],"[41239,39254]","['en','fr']",12,

41239,IS,,ISO 6107-7:2006,Water quality — Vocabulary — Part 7:,Qualité de l'eau — Vocabulaire — Partie 7:,2006-05-19,3,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,[27399],[67643],"['en','fr','ru']",27,"<p>ISO 6107-7:2006 defines terms used in certain fields of water quality characterization</p><p>In addition to the terms and definitions in three of the official ISO languages (English, French and Russian), ISO 6107-7:2006 gives the equivalent terms and their definitions in the German language; these are published under the responsibility of the member bodies of Germany (DIN), Austria (ON) and Switzerland (SNV). However, only the terms and definitions given in the official languages can b

12321,IS,,ISO 6107-8:1993,Water quality — Vocabulary — Part 8:,Qualité de l'eau — Vocabulaire — Partie 8:,1993-05-20,1,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,,"[32236,67643]","['de','en','fr','ru']",16,"<p>Defines, in the English alphabetic order, an eighth list of 66 terms in English, French, Russian, German used in certain fields of water quality characterization. Alphabetical indexes in French, Russian and German are given. However, only the terms and definitions in the official languages (English, French and Russian) can be considered as ISO terms and definitions.</p>"

32407,IS,Amd,ISO 6107-8:1993/Amd 1:2001,Water quality — Vocabulary — Part 8: — Amendment 1,Qualité de l'eau — Vocabulaire — Partie 8: — Amendement 1,2001-12-06,1,"['01.040.13','13.060.01']",ISO/TC 147/SC 1,9599,,[67643],"['en','fr','ru']",11,

12322,IS,,ISO 6108:1978,Double equal angle cutters with plain bore and key drive,Fraises isocèles à alésage lisse et entraînement par clavette,1978-08-01,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[50899],"['en','fr']",1,

4727,IS,,ISO 611:1980,Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary,Véhicules routiers — Freinage des véhicules automobiles et de leurs remorques — Vocabulaire,1980-11-01,2,"['43.040.40','01.040.43']",ISO/TC 22,9599,,[4728],"['en','fr']",8,

4728,IS,,ISO 611:1994,Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary,Véhicules routiers — Freinage des véhicules automobiles et de leurs remorques — Vocabulaire,1994-11-10,3,"['43.040.40','01.040.43']",ISO/TC 22,9599,[4727],[28733],"['en','fr','ru']",45,"<p>Cancels and replaces the second edition (1980). Defines the principal terms in braking and braking equipment. These terms may designate either the systems or elements involved during the operation of braking, or the values characterizing the whole or a part of the operation. They apply to road vehicles, i. e. automotive vehicles, to towed vehicles and to combinations of vehicles as defined in ISO 3833.</p>"

12323,IS,,ISO 6110:1982,Plastics moulded footwear — Lined or unlined polyvinyl chloride industrial boots with chemical resistance,"Articles chaussants moulés en plastique — Bottes en polychlorure de vinyle, doublées ou non, à usage industriel, résistant aux produits chimiques",1982-11-01,1,"['13.340.50','83.140.99']",ISO/TC 45,9599,,[12324],"['en','fr']",2,

12326,IS,,ISO 6112:1982,Plastics moulded footwear — Lined or unlined polyvinyl chloride industrial boots with general purpose resistance to oils and fats,"Articles chaussants moulés en plastique — Bottes en polychlorure de vinyle, doublées ou non, à usage industriel, résistant aux corps gras d'usage général",1982-11-01,1,"['13.340.50','83.140.99']",ISO/TC 45,9599,,[12327],"['en','fr']",1,

12330,IS,,ISO 6115:1981,Shipbuilding — Trawl winches,Construction navale — Treuils de pêche,1981-07-01,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[12331],"['en','fr']",7,

12333,IS,,ISO 6117:1980,Road vehicles — Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.),Véhicules routiers — Capuchons en caoutchouc pour cylindres de roue pour freins hydrauliques à tambour utilisant un liquide de frein à base non pétrolière (Température maximale d'utilisation 100 degrés C),1980-08-01,1,"['83.140.50','43.040.40']",ISO/TC 22,9599,,"[12334,38511]","['en','fr']",4,"<p>Specifies performance tests for moulded rubber boots used as end closures on drum type brake cylinders. These boots prevent the entrance of dirt and moisture which could cause corrosion and otherwise impair w

12335,IS,,ISO 6118:1980,Road vehicles — Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.),Véhicules routiers — Coupelles et joints en élastomère pour cylindres de freins hydrauliques utilisant un liquide de frein à base non pétrolière — (température maximale d'utilisation 70 degrés C),1980-10-01,1,"['83.140.50','43.040.40']",ISO/TC 22,9599,,"[12336,40420]","['en','fr']",12,"<p>Specifies performance tests of brake cups and seals for braking systems. Requirements relating to chemical composition, tensile strength and elongation of the elastomer compound are not included. Applies to moulded

12337,IS,,ISO 6119:1980,Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.),Véhicules routiers — Joints en élastomère pour cylindres de freins hydrauliques à disque utilisant un liquide de frein à base non pétrolière (Température maximale d'utilisation 120 degrés C),1980-08-01,1,"['83.140.50','43.040.40']",ISO/TC 22,9599,,"[12338,41832]","['en','fr']",6,"<p>Specifies the performance test methods and requirements for seals used in disc brake cylinders. Applies to solid section type seals (square, rectangular, 'O'-ring) mounted stationary in the cylinder bore or on the movable piston of d

12339,IS,,ISO 6120:1986,Road vehicles — Brake hose assemblies for hydraulic braking systems used with a petroleum-base hydraulic fluid,Véhicules routiers — Flexible pour systèmes de freinage hydraulique utilisant un liquide de frein à base pétrolière,1986-12-04,1,"['83.140','43.040.40']",ISO/TC 22,9599,,[12340],"['en','fr']",11,

12341,IS,,ISO 6121:1979,Surface active agents — Technical alkyl- sulphonates — Determination of alkylmonosulphonates content (direct two-phase titration method),Agents de surface — Alcanesulfonates techniques — Détermination de la teneur en alcanemonosulfonates (Méthode par titrage direct dans deux phases),1979-02-01,1,['71.100.40'],ISO/TC 91,9599,,[12342],"['en','fr']",3,

12344,IS,,ISO 6123-1:1982,Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness,Cylindres revêtus de caoutchouc ou de plastique — Spécifications — Partie 1: Spécifications de dureté,1982-09-01,1,['83.140.99'],ISO/TC 45/SC 4,9599,,[67997],"['en','fr']",3,"<p>Defines covered rollers as cylindrical cores, generally of metal, with a cover of rubber or plastics for particular use. They are manufactured in a wide variety of sizes and hardness grades depending on the intended use. - Part 2 and 3 of this standard deal with surface characteristics and dimensional tolerances.</p>"

12345,IS,,ISO 6123-2:1983,Rubber or plastics covered rollers — Specifications — Part 2: Classification of surface characteristics,Cylindres revêtus de caoutchouc ou de plastique — Spécifications — Partie 2: Classification des caractéristiques de surface,1983-09-01,1,['83.140.99'],ISO/TC 45,9599,,[12346],"['en','fr']",2,

12346,IS,,ISO 6123-2:1988,Rubber- or plastics-covered rollers — Specifications — Part 2: Surface characteristics,Cylindres revêtus de caoutchouc ou de plastique — Spécifications — Partie 2: Caractéristiques de surface,1988-10-20,2,['83.140.99'],ISO/TC 45/SC 4,9599,[12345],[67999],"['en','fr']",4,"<p>Defines covered rollers as cylindrical cores, generally of metal, with a cover of rubber or plastics for particular use. Establishes a classification according to surface quality or imperfections and surface finish. A test method for the determination of surface roughness is also described. - Part 1 of this standard deals with the requirements for hardness, part 3 with dimensional tolerances. - R

12347,IS,,ISO 6123-3:1985,Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances,Cylindres revêtus de caoutchouc ou de plastique — Spécifications — Partie 3: Tolérances dimensionnelles,1985-09-26,1,['83.140.99'],ISO/TC 45/SC 4,9599,,[89293],"['en','fr']",6,"<p>Specifies classes of dimensional tolerances and test methods for the measurement of dimensions. Defines covered rollers as cylindrical cores, generally of metal, with a cover of rubber or plastics for particular use. They are manufactured in a wide variety of sizes and hardness grades depending on the intended use. - Part 1 and 2 of this standard deal with the requirements for hardness, and the surface ch

12349,IS,,ISO 6124-1:1982,"Spherical plain radial bearings, joint type — Boundary dimensions — Part 1: Dimension series E and G",Rotules lisses d'articulation à contact radial — Dimensions d'encombrement — Partie 1: Séries de dimensions E et G,1982-05-01,2,['21.100.10'],ISO/TC 4,9599,,[12350],"['en','fr']",2,

12350,IS,,ISO 6124-1:1987,"Spherical plain radial bearings, joint type — Boundary dimensions — Part 1: Dimension series E and G",Rotules lisses d'articulation à contact radial — Dimensions d'encombrement — Partie 1: Séries de dimensions E et G,1987-11-19,3,['21.100.10'],ISO/TC 4/SC 7,9599,"[12349,12348]",[24243],"['en','fr']",2,

12348,IS,,ISO 6124:1979,Withdrawal of ISO 6124-1979,Annulation de l'ISO 6124-1979,1979-12-01,1,['21.100.10'],ISO/TC 4,9599,,[12350],"['en','fr']",2,

12351,IS,,ISO 6124-2:1982,"Spherical plain radial bearings, joint type — Boundary dimensions — Part 2: Dimension series EW, bearings with extended inner ring","Rotules lisses d'articulation à contact radial — Dimensions d'encombrement — Partie 2: Série de dimensions EW, rotules à bague intérieure large",1982-05-01,1,['21.100.10'],ISO/TC 4/SC 7,9599,,[24243],"['en','fr']",2,

12352,IS,,ISO 6124-3:1982,"Spherical plain radial bearings, joint type — Boundary dimensions — Part 3: Dimension series C",Rotules lisses d'articulation à contact radial — Dimensions d'encombrement — Partie 3: Série de dimensions C,1982-05-01,1,['21.100.10'],ISO/TC 4/SC 7,9599,,[24243],"['en','fr']",2,

12353,IS,,ISO 6125:1982,Spherical plain radial bearings; joint type — Tolerances,Rotules lisses d'articulation à contact radial — Tolérances,1982-03-01,2,['21.100.10'],ISO/TC 4/SC 7,9599,,[24243],"['en','fr']",2,

12354,IS,,ISO 6126:1982,Spherical plain bearing rod ends — Dimension series E and JK — Boundary dimensions and tolerances,Embouts à rotule — Séries de dimensions E et JK — Dimensions d'encombrement et tolérances,1982-05-01,1,['21.100.10'],ISO/TC 4/SC 7,9599,,[12355],"['en','fr']",5,

12355,IS,,ISO 6126:1987,Spherical plain bearing rod ends — Dimension series E and JK — Boundary dimensions and tolerances,Embouts à rotule — Séries de dimensions E et JK — Dimensions d'encombrement et tolérances,1987-11-12,2,['21.100.10'],ISO/TC 4/SC 7,9599,[12354],[24246],"['en','fr']",5,

4730,IS,,ISO 613:1982,"Shipbuilding — Magnetic compasses, binnacles and azimuth reading devices — Class B","Construction navale — Compas magnétiques, habitacles et alidades — Classe B",1982-10-01,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[29260],"['en','fr']",4,

4731,IS,Cor,ISO 613:1982/Cor 1:1991,"Shipbuilding — Magnetic compasses, binnacles and azimuth reading devices — Class B — Technical Corrigendum 1","Construction navale — Compas magnétiques, habitacles et alidades — Classe B — Rectificatif technique 1",1991-10-10,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[29260],"['en','fr']",1,

29260,IS,,ISO 613:2000,"Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class B","Navires et technologie maritime — Compas magnétiques, habitacles et alidades — Classe B",2000-02-03,2,['47.020.70'],ISO/TC 8/SC 6,9599,"[4731,4730]",[43301],['en'],7,