Withdrawn and superseded ISO standards — page 136 of 246

11912,IS,,ISO 5775-2:1996,Bicycle tyres and rims — Part 2: Rims,Pneumatiques et jantes pour cycles — Partie 2: Jantes,1996-11-28,2,['43.150'],ISO/TC 31/SC 10,9599,[11910],[56560],"['en','fr']",16,<p>Specifies rim dimensions for bicycle tyres; gives only those rim contour dimensions necessary for tyre mounting and to fit the tyre on the rim.</p>

34474,IS,Amd,ISO 5775-2:1996/Amd 1:2001,Bicycle tyres and rims — Part 2: Rims — Amendment 1,Pneumatiques et jantes pour cycles — Partie 2: Jantes — Amendement 1,2001-12-13,2,['43.150'],ISO/TC 31/SC 10,9599,,[56560],"['en','fr']",2,

56560,IS,,ISO 5775-2:2015,Bicycle tyres and rims — Part 2: Rims,Pneumatiques et jantes pour cycles — Partie 2: Jantes,2015-11-25,3,['43.150'],ISO/TC 31/SC 10,9599,"[11912,34474]",[79924],"['en','fr']",16,"<p>ISO 5775-2:2015 specifies rim dimensions for bicycle tyres: it gives only those rim contour dimensions necessary for tyre mounting and to fit the tyre on the rim.</p><p>ISO 5775‑1 covers designations and dimensions for tyres.</p><p>ISO 5775‑2 covers straight side (SS) rims, hooked bead type (HB) rims and crotchet type (C) rims.</p>"

11913,IS,,ISO 5776:1983,Graphic technology — Symbols for text correction,Technologie graphique — Symboles pour correction de textes,1983-12-01,1,['37.100.01'],ISO/TC 130,9599,,"[54334,43885,61838,23389]","['en','fr','ru']",4,"<p>Specifies symbols for proofreading such as of manuscripts, typescripts and printer's proofs. Does not apply to symbols of graphic art such as used in photo-engraving plants. Symbols for the correction of mathematical texts and colours illustrations are excluded. The total number of symbols specified is 16, each in English, French and Russian.</p>"

61838,IS,,ISO 5776:2016,Graphic technology — Symbols for text proof correction,Technologie graphique — Symboles pour correction de textes,2016-04-01,2,['37.100.01'],ISO/TC 130,9599,[11913],[75955],['en'],34,"<p>ISO 5776:2016 specifies symbols for use in copy preparation and proof correction in alphabetic languages and in logographic languages. It is applicable to texts submitted for correction, whatever their nature or presentation (manuscripts, typescripts, printer's proofs, etc.), and for marking up copy for all methods of composition.</p><p>Symbols for the correction of mathematical texts and colour illustrations are not included.</p>"

11914,IS,,ISO 5778:1979,Shipbuilding — Small weathertight steel hatches,"Construction navale — Petits panneaux en acier, étanches aux intempéries",1979-12-01,1,['47.020.10'],ISO/TC 8/SC 8,9599,,[23725],"['en','fr']",6,

4672,IS,,ISO 578:1973,"Rolling bearings — Tapered roller bearings — Inch series — Tolerance classes 4 (normal tolerances), 3, 0 and 00","Roulements — Roulements à rouleaux coniques — Séries en inches — Classes de tolérances 4 (tolérances normales), 3, 0 et 00",1973-02-01,1,['21.100.20'],ISO/TC 4,9599,,[4673],"['en','fr']",3,

11917,IS,,ISO 5781:1987,"Hydraulic fluid power — Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces","Transmissions hydrauliques — Réducteurs de pression (à l'exception des limiteurs de pression), soupapes de séquence, soupapes de décharge, soupapes d'étranglement, clapets de non-retour — Plan de pose",1987-07-09,1,['23.100.50'],ISO/TC 131/SC 5,9599,,[20510],"['en','fr']",17,

20510,IS,,ISO 5781:2000,"Hydraulic fluid power — Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces","Transmissions hydrauliques — Réducteurs de pression, soupapes de séquence, soupapes de décharge, soupapes d'étranglement et clapets de non-retour — Plan de pose",2000-08-17,2,['23.100.50'],ISO/TC 131/SC 5,9599,[11917],[62774],"['en','fr']",20,

11918,IS,,ISO 5782-1:1990,Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in commercial literature and specific requirements,Transmissions pneumatiques — Filtres pour air comprimé — Partie 1: Principales caractéristiques à inclure dans la documentation commerciale et exigences particulières,1990-03-08,1,['23.100.60'],ISO/TC 131/SC 5,9599,,[21627],"['en','fr']",5,

21627,IS,,ISO 5782-1:1997,Pneumatic fluid power — Compressed-air filters — Part 1: Main characteristics to be included in suppliers' literature and product marking requirements,Transmissions pneumatiques — Filtres pour air comprimé — Partie 1: Principales caractéristiques à inclure dans la documentation des fournisseurs et exigences de marquage du produit,1997-12-25,2,['23.100.60'],ISO/TC 131/SC 5,9599,[11918],[67310],"['en','fr']",7,

11920,IS,,ISO 5783:1981,Hydraulic fluid power — Code for identification of valve mounting surfaces,Transmissions hydrauliques — Code pour l'identification des plans de pose,1981-03-01,1,['23.100.50'],ISO/TC 131/SC 5,9599,,[11921],"['en','fr']",2,

11921,IS,,ISO 5783:1995,Hydraulic fluid power — Code for identification of valve mounting surfaces and cartridge valve cavities,Transmissions hydrauliques — Code pour l'identification des plans de pose et des logements de cartouche,1995-12-14,2,['23.100.50'],ISO/TC 131/SC 5,9599,[11920],[74330],"['en','fr']",4,<p>Defines an identification code for hydraulic valve mounting surfaces and for hydraulic cartridge valve cavities consisting of five groups of numbers. Examples are given for each valve type.</p>

4674,IS,,ISO 579:1981,Coke — Determination of total moisture content,Coke — Détermination de l'humidité totale,1981-11-01,2,['75.160.10'],ISO/TC 27/SC 3,9599,,[1545],"['en','fr']",2,

1545,IS,,ISO 579:1999,Coke — Determination of total moisture,Coke — Détermination de l'humidité totale,1999-12-16,3,['75.160.10'],ISO/TC 27/SC 5,9599,[4674],[62608],['en'],3,

11933,IS,,ISO 5794-1:1984,"Rubber compounding ingredients — Silica, precipitated, hydrated — Part 1: Non-rubber tests",Ingrédients de mélange du caoutchouc — Silices hydratées précipitées — Partie 1: Essais sur le produit brut,1984-12-01,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[2178],"['en','fr']",12,

2178,IS,,ISO 5794-1:1994,"Rubber compounding ingredients — Silica, precipitated, hydrated — Part 1: Non-rubber tests",Ingrédients de mélange du caoutchouc — Silices hydratées précipitées — Partie 1: Essais sur le produit brut,1994-12-22,2,['83.040.20'],ISO/TC 45/SC 3,9599,[11933],[36690],"['en','fr']",18,"<p>Specifies twelve methods of test for properties of precipitated hydrated silica. Four of them (determination of total copper content, total manganese content, total iron content, specific surface area) are described in the annexes A to D, for the other methods references are made to ISO 3262, 787-2, -8, -9, -10, -18.</p>"

36690,IS,,ISO 5794-1:2005,"Rubber compounding ingredients — Silica, precipitated, hydrated — Part 1: Non-rubber tests",Ingrédients de mélange du caoutchouc — Silices hydratées précipitées — Partie 1: Essais sur le produit brut,2005-04-22,3,['83.040.20'],ISO/TC 45/SC 3,9599,"[25533,2178]",[55846],"['en','fr']",31,<p>ISO 5794-1:2005 specifies methods of test for characterizing precipitated hydrated silica for use as a rubber compounding ingredient. A definition of precipitated hydrated silica is given.</p>

43768,IS,Cor,ISO 5794-1:2005/Cor 1:2006,"Rubber compounding ingredients — Silica, precipitated, hydrated — Part 1: Non-rubber tests — Technical Corrigendum 1",Ingrédients de mélange du caoutchouc — Silices hydratées précipitées — Partie 1: Essais sur le produit brut — Rectificatif technique 1,2006-01-26,3,['83.040.20'],ISO/TC 45/SC 3,9599,,[55846],"['en','fr']",1,

46120,IS,Cor,ISO 5794-1:2005/Cor 2:2007,"Rubber compounding ingredients — Silica, precipitated, hydrated — Part 1: Non-rubber tests — Technical Corrigendum 2",Ingrédients de mélange du caoutchouc — Silices hydratées précipitées — Partie 1: Essais sur le produit brut — Rectificatif technique 2,2007-05-15,3,['83.040.20'],ISO/TC 45/SC 3,9599,,[55846],"['en','fr']",1,

55846,IS,,ISO 5794-1:2010,"Rubber compounding ingredients — Silica, precipitated, hydrated — Part 1: Non-rubber tests",Ingrédients de mélange du caoutchouc — Silices hydratées précipitées — Partie 1: Essais sur le produit brut,2010-03-10,4,['83.040.20'],ISO/TC 45/SC 3,9599,"[52997,43768,36690,46120]",[82049],"['en','fr']",31,<p>ISO 5794-1:2010 specifies methods of test for characterizing precipitated hydrated silica for use as a rubber compounding ingredient. A definition of precipitated hydrated silica is given.</p>

11935,IS,,ISO 5794-2:1982,"Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Test recipe and determination of physical properties in rubber",Ingrédients de mélange du caoutchouc — Silices hydratées précipitées — Partie 2: Formule d'essai et détermination des propriétés physiques dans le caoutchouc,1982-11-01,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[25535],"['en','fr']",2,

25535,IS,,ISO 5794-2:1998,"Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber",Ingrédients de mélange du caoutchouc — Silices hydratées précipitées — Partie 2: Méthodes d'évaluation dans le caoutchouc styrène-butadiène,1998-11-05,2,['83.040.20'],ISO/TC 45/SC 3,9599,[11935],[65595],"['en','fr']",5,

11941,IS,,ISO 5796-1:1984,Rubber compounding ingredients — Natural calcium carbonate — Part 1: Test methods,Ingrédients de mélange du caoutchouc — Carbonate de calcium naturel — Partie 1: Méthodes d'essai,1984-12-01,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[11940],['en'],6,

11940,IS,,ISO 5796:1990,Rubber compounding ingredients — Natural calcium carbonate — Test methods,Ingrédients de mélange du caoutchouc — Carbonate de calcium naturel — Méthodes d'essai,1990-11-22,1,['83.040.20'],ISO/TC 45/SC 3,9599,[11941],[27011],"['en','fr']",8,

11943,IS,,ISO 5797-1:1989,Shipbuilding and marine structures — Windows and side scuttles for fire-resistant constructions — Specifications — Part 1: 'B' class divisions,Construction navale et structures maritimes — Fenêtres et hublots pour constructions résistant au feu — Spécifications — Partie 1: Cloisonnements de type 'B',1989-06-22,1,['47.020.10'],ISO/TC 8/SC 8,9599,,[36422],"['en','fr']",4,"<p>Lays down the requirements on the construction for glass panes, glassholder, main frame as well as testing according to the Chapter II, Regulation 3 of the 1981 Amendments to the International Convention for the Safety of Life at Sea, 1974 (SOLAS 1974).</p>"

11945,IS,,ISO 5799:1981,Photography — Direct-exposure medical and dental radiographic film/process combinations — Determination of ISO speed and average gradient,Photographie — Ensembles film/traitement destinés à la radiographie médicale sans écran et à la radiographie dentaire — Détermination de la sensibilité ISO et du contraste moyen,1981-10-01,1,['37.040.25'],ISO/TC 42,9599,,[11946],"['en','fr']",7,

4675,IS,,ISO 580:1973,Moulded fittings in unplasticized polyvinyl chloride (PVC) for use under pressure — Oven test,Raccords moulés en polychlorure de vinyle (PVC) non plastifié pour canalisations sous pression — Essai à l'étuve,1973-09-01,1,['23.040.45'],ISO/TC 138,9599,,[4676],"['en','fr']",1,

4676,IS,,ISO 580:1990,Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings — Oven test — Test method and basic specifications,Raccords en poly(chlorure de vinyle) non plastifié (PVC-U) moulés par injection — Essai à l'étuve — Méthode d'essai et spécifications de base,1990-11-15,2,['23.040.45'],ISO/TC 138/SC 5,9599,"[4675,6820]",[26616],"['en','fr']",3,"<p>The test can be used to determine whether cold slug or unfused areas are present, to determine the amount of moulded-in stress produced by the moulding process, reveal contamination and to show the quality of the weld. Complete fittings are subjected to a temperature of 150° centigrade in an air-circulating oven for a given

11947,IS,,ISO 5800:1979,Photography — Determination of ISO speed of colour negative films for still photography —,Photographie — Détermination de la sensibilité ISO des films photographiques négatifs couleur,1979-02-01,1,['37.040.20'],ISO/TC 42,9599,,[11948],"['en','fr']",4,

11949,IS,,ISO 5801:1997,Industrial fans — Performance testing using standardized airways,Ventilateurs industriels — Essais aérauliques sur circuits normalisés,1997-06-12,1,['23.120'],ISO/TC 117,9599,,[39542],"['en','fr']",232,

39542,IS,,ISO 5801:2007,Industrial fans — Performance testing using standardized airways,Ventilateurs industriels — Essais aérauliques sur circuits normalisés,2007-12-13,2,['23.120'],ISO/TC 117,9599,[11949],[56517],"['en','fr']",228,"<p>ISO 5801:2007 deals with the determination of the performance of industrial fans of all types except those designed solely for air circulation e.g. ceiling fans and table fans.</p><p>Estimates of uncertainty of measurement are provided and rules for the conversion, within specified limits, of test results for changes in speed, gas handled and, in the case of model tests, size, are given.</p>"

51925,IS,Cor,ISO 5801:2007/Cor 1:2008,Industrial fans — Performance testing using standardized airways — Technical Corrigendum 1,Ventilateurs industriels — Essais aérauliques sur circuits normalisés — Rectificatif technique 1,2008-06-17,2,['23.120'],ISO/TC 117,9599,,[56517],"['en','fr']",1,

11952,IS,,ISO 5805:1981,Mechanical vibration and shock affecting man — Vocabulary,Chocs et vibrations mécaniques affectant l'homme — Vocabulaire,1981-10-01,1,"['01.040.13','13.160']",ISO/TC 108/SC 4,9599,,[11953],"['en','fr']",8,

4677,IS,,ISO 581:1980,Weldability — Definition,Soudabilité — Définition,1980-07-01,1,"['25.160.01','01.040.25']",ISO/TC 44/SC 7,9599,,"[39565,40507]","['en','fr','ru']",1,"<p>Gives a general definition of weldability, taking into consideration all the welding processes and taking note of all the different types of construction whatever properties they may have. As it includes all possibilities resulting from the combination of the four variables: material, process, type of construction and purpose, it should be possible to deduce any particular definition.</p>"

11960,IS,,ISO 5814:1984,Water quality — Determination of dissolved oxygen — Electrochemical probe method,Qualité de l'eau — Dosage de l'oxygène dissous — Méthode électrochimique à la sonde,1984-06-01,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[11961],"['en','fr']",8,

11961,IS,,ISO 5814:1990,Water quality — Determination of dissolved oxygen — Electrochemical probe method,Qualité de l'eau — Dosage de l'oxygène dissous — Méthode électrochimique à la sonde,1990-03-29,2,['13.060.50'],ISO/TC 147/SC 2,9599,[11960],[45346],"['en','fr']",8,"<p>Includes a procedure by means of an electrochemical cell which is isolated from the sample by a gas permeable membrane. Depending on the type of probe employed measurement can be made either as concentration of oxygen, percentage saturation or both. The procedure is suitable for measurements made in the field and for continuous monitoring and in the laboratory. It is the preferred procedure for highly coloured and turbid wa

31090,IS,,ISO 5815-1:2003,Water quality — Determination of biochemical oxygen demand after n days (BODn) — Part 1: Dilution and seeding method with allylthiourea addition,Qualité de l'eau — Détermination de la demande biochimique en oxygène après n jours (DBOn) — Partie 1: Méthode par dilution et ensemencement avec apport d'allylthiourée,2003-03-31,1,['13.060.50'],ISO/TC 147/SC 2,9599,[11963],[69058],"['en','fr']",15,"<p>ISO 5815-1:2003 specifies a determination of the biochemical oxygen demand of waters by dilution and seeding with suppression of nitrification.</p><p>ISO 5815-1:2003 is applicable to all waters having biochemical oxygen demands greater than or equal to 3 mg/l of oxygen (the

11962,IS,,ISO 5815:1983,Water quality — Determination of biochemical oxygen demand after n days (BODn) — Dilution and seeding method,Qualité de l'eau — Détermination de la demande biochimique en oxygène après n jours (DBOn) — Méthode par dilution et ensemencement,1983-10-01,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[11963],"['en','fr']",4,

11963,IS,,ISO 5815:1989,Water quality — Determination of biochemical oxygen demand after 5 days (BOD 5) — Dilution and seeding method,Qualité de l'eau — Détermination de la demande biochimique en oxygène après 5 jours (DBO 5) — Méthode par dilution et ensemencement,1989-06-29,2,['13.060.50'],ISO/TC 147/SC 2,9599,[11962],"[31090,31091]","['en','fr']",6,"<p>The procedure specified is applicable to all waters having values greater than or equal to 3 mg of oxygen per litre and not exceeding 6 000 mg of oxygen per litre. For greater values the procedure is still applicable, but the errors caused by the dilutions necessary require the results to be interpreted with circumspection. The results obta

11965,IS,,ISO 5817:1992,Arc-welded joints in steel — Guidance on quality levels for imperfections,Assemblages en acier soudés à l'arc — Guide des niveaux d'acceptation des défauts,1992-06-04,1,['25.160.40'],ISO/TC 44/SC 10,9599,,[25463],"['en','fr']",9,"<p>Three levels are given referring to production quality and not to the fitness-for-purpose of the product manufactured. Applies to unalloyed and alloyed steels; manual, mechanized and automatic processes; all welding positions; butt welds, fillet welds and branch connections; materials in the thickness range 3 mm to 63 mm.</p>"

25463,IS,,ISO 5817:2003,"Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections","Soudage — Assemblages en acier, nickel, titane et leurs alliages soudés par fusion (soudage par faisceau exclu) — Niveaux de qualité par rapport aux défauts",2003-10-21,2,['25.160.40'],ISO/TC 44/SC 10,9599,[11965],[54952],"['en','fr','ru']",25,"<p>ISO 5817:2003 (corrected version:2005) provides quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness above 0,5 mm. It covers fully penetrated butt welds and all fillet wel

43814,IS,Cor,ISO 5817:2003/Cor 1:2006,"Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections — Technical Corrigendum 1","Soudage — Assemblages en acier, nickel, titane et leurs alliages soudés par fusion (soudage par faisceau exclu) — Niveaux de qualité par rapport aux défauts — Rectificatif technique 1",2006-02-14,2,['25.160.40'],ISO/TC 44/SC 10,9599,,[54952],"['en','fr','ru']",2,

54952,IS,,ISO 5817:2014,"Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections","Soudage — Assemblages en acier, nickel, titane et leurs alliages soudés par fusion (soudage par faisceau exclu) — Niveaux de qualité par rapport aux défauts",2014-02-06,3,['25.160.40'],ISO/TC 44/SC 10,9599,"[25463,43814]",[80209],"['en','fr','ru']",27,"<p>ISO 5817:2014 provides quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness ≥ 0,5 mm. It covers fully penetrated butt welds and all fillet welds. Its principles ca

4678,IS,,ISO 582:1979,Rolling bearings — Metric series — Chamfer dimension limits,Roulements — Séries métriques — Dimensions limites des arrondis,1979-10-01,2,['21.100.20'],ISO/TC 4,9599,,[20515],"['en','fr']",4,

20515,IS,,ISO 582:1995,Rolling bearings — Chamfer dimensions — Maximum values,Roulements — Dimensions des arrondis — Valeurs maximales,1995-05-18,3,['21.100.20'],ISO/TC 4/SC 4,9599,[4678],[84995],"['en','fr']",5,"<p>Cancels and replaces the second edition (1979). Specifies the maximum chamfer dimensions of metric series rolling bearings, for which boundary dimensions, including chamfer minimum dimensions, are given in other International Standards. Gives also requirements for the maximum dimensions of the corresponding shaft and housing filet radii. Does not apply to chamfers, for which dimensions are not specified, or for which other dimensions are specified in other International Standards

60216,IS,Amd,ISO 582:1995/Amd 1:2013,Rolling bearings — Chamfer dimensions — Maximum values — Amendment 1,Roulements — Dimensions des arrondis — Valeurs maximales — Amendement 1,2013-06-25,3,['21.100.20'],ISO/TC 4/SC 4,9599,,[84995],"['en','fr']",2,

11968,IS,,ISO 5821:1979,Resistance spot welding electrode caps,Embouts amovibles de pointes d'électrodes pour soudage par points par résistance,1979-12-01,1,['25.160.30'],ISO/TC 44/SC 6,9599,,[45871],"['en','fr']",2,"<p>Establishes the dimensions and tolerances of resistance spot welding electrode caps, where a female taper (see ISO 1089) is used to fix the cap to an electrode adaptor (see ISO 5183). Applies only to electrode caps for which the electrode force Fmax given for diameter d1 in the table below is not exceeded. Contains also designation, material and marking.</p>"

45871,IS,,ISO 5821:2009,Resistance welding — Spot welding electrode caps,Soudage par résistance — Embouts amovibles de pointes d'électrodes pour soudage par points,2009-01-23,2,['25.160.30'],ISO/TC 44/SC 6,9599,[11968],"[86485,80182]","['en','fr']",9,"<p>ISO 5821:2009 specifies the dimensions and tolerances of resistance spot welding electrode caps, where a female taper is used to fix the cap to an electrode adaptor.</p><p>ISO 5821:2009 applies only to electrode caps for which the electrode force given for diameters 13 mm, 16mm and 20 mm (taper 1:10) and for diameters 12,7 mm, 15,8 mm and 19,1 mm (taper 1:9,6) is not exceeded.</p>"

11969,IS,,ISO 5822:1982,Spot welding equipment — Taper plug gauges and taper ring gauges,Matériel de soudage par points — Calibres coniques mâles et calibres coniques femelles,1982-08-01,1,['25.160.30'],ISO/TC 44/SC 5,9599,,[11970],"['en','fr']",4,

11974,IS,,ISO 5826:1983,Transformers for resistance welding machines — General specifications applicable to all transformers,Transformateurs pour machines à souder par résistance — Spécifications générales applicables à tous les transformateurs,1983-11-01,1,['25.160.30'],ISO/TC 44/SC 6,9599,,[2418],"['en','fr']",13,

2418,IS,,ISO 5826:1999,Resistance welding equipment — Transformers — General specifications applicable to all transformers,Matériel de soudage par résistance — Transformateurs — Spécifications générales applicables à tous les transformateurs,1999-11-25,2,"['29.180','25.160.30']",ISO/TC 44/SC 6,9599,[11974],[55983],"['en','fr']",23,

11976,IS,,ISO 5828:1983,Resistance welding equipment — Secondary connecting cables with terminals connected to water-cooled lugs — Dimensions and characteristics,Équipements de soudage par résistance — Câbles de raccordement secondaires avec extrémités raccordées à des plages refroidies par eau — Dimensions et caractéristiques,1983-04-01,1,['25.160.30'],ISO/TC 44/SC 6,9599,,[30112],"['en','fr']",4,

21799,IS,,ISO 583-1:1999,Conveyor belts with a textile carcass — Total thickness and thickness of elements — Part 1: Methods of test,Courroies transporteuses à carcasse textile — Épaisseur totale et épaisseur des éléments — Partie 1: Méthodes d'essai,1999-12-16,1,['53.040.20'],ISO/TC 41/SC 3,9599,[4680],[38396],"['en','fr']",10,

45294,IS,Cor,ISO 583-1:1999/Cor 1:2006,Conveyor belts with a textile carcass — Total thickness and thickness of elements — Part 1: Methods of test — Technical Corrigendum 1,Courroies transporteuses à carcasse textile — Épaisseur totale et épaisseur des éléments — Partie 1: Méthodes d'essai — Rectificatif technique 1,2006-11-28,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[38396],"['en','fr']",1,

4679,IS,,ISO 583:1975,Conveyor belts — Tolerances on total thickness and thickness of covers,Courroies transporteuses — Tolérances sur l'épaisseur totale et l'épaisseur des revêtements,1975-05-01,1,['53.040.20'],ISO/TC 41,9599,,[4680],"['en','fr']",1,

4680,IS,,ISO 583:1990,Conveyor belts with a textile carcass — Tolerances on total thickness and thickness of covers — Direct measurement method,Courroies transporteuses à carcasse textile — Tolérances sur l'épaisseur totale et l'épaisseur des revêtements — Méthode de mesurage direct,1990-11-08,2,['53.040.20'],ISO/TC 41/SC 3,9599,[4679],[21799],"['en','fr']",4,<p>Specifies: a) the maximum difference between the total thickness measured at any two points of the area of a conveyor belt; b) the permissible deviations on the thickness of each cover; c) the appropriate methods of measurement. Applies only to belts with a textile or an aramide carcass. This second edition cancels and replaces the f

38396,IS,,ISO 583:2007,Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods,Courroies transporteuses à carcasse textile — Épaisseur totale de la courroie et épaisseur des éléments constitutifs — Méthodes d'essai,2007-06-13,3,['53.040.20'],ISO/TC 41/SC 3,9599,"[21799,45294]",[84331],"['en','fr']",9,"<p>ISO 583:2007 specifies test methods for the determination of total belt thickness and the thickness of constitutive elements of conveyor belts having a textile carcass. The constitutive elements include the covers, the carcass and interlayers, i.e. the material between adjoining plies. It is not suitable or valid for light conveyor b

11980,IS,,ISO 5832-1:1980,Implants for surgery — Metallic materials — Part 1: Wrought stainless steel,Implants chirurgicaux — Produits à base de métaux — Partie 1: Acier à forger inoxydable,1980-09-01,1,['11.040.40'],ISO/TC 150,9599,,[11981],"['en','fr']",3,

11981,IS,,ISO 5832-1:1987,Implants for surgery — Metallic materials — Part 1: Wrought stainless steel,Implants chirurgicaux — Produits à base de métaux — Partie 1: Acier à forger inoxydable,1987-08-13,2,['11.040.40'],ISO/TC 150/SC 1,9599,[11980],[21971],"['en','fr']",4,

21971,IS,,ISO 5832-1:1997,Implants for surgery — Metallic materials — Part 1: Wrought stainless steel,Implants chirurgicaux — Produits à base de métaux — Partie 1: Acier corroyé inoxydable,1997-07-10,3,['11.040.40'],ISO/TC 150/SC 1,9599,[11981],[39023],"['en','fr']",5,

39023,IS,,ISO 5832-1:2007,Implants for surgery — Metallic materials — Part 1: Wrought stainless steel,Implants chirurgicaux — Matériaux métalliques — Partie 1: Acier inoxydable corroyé,2007-06-14,4,['11.040.40'],ISO/TC 150/SC 1,9599,[21971],[66636],"['en','fr','ru']",6,"<p>ISO 5832-1:2007 specifies the characteristics of, and corresponding test methods for, wrought stainless steel for use in the manufacture of surgical implants.</p>"

51390,IS,Cor,ISO 5832-1:2007/Cor 1:2008,Implants for surgery — Metallic materials — Part 1: Wrought stainless steel — Technical Corrigendum 1,Implants chirurgicaux — Matériaux métalliques — Partie 1: Acier inoxydable corroyé — Rectificatif technique 1,2008-04-02,4,['11.040.40'],ISO/TC 150/SC 1,9599,,[66636],"['en','fr','ru']",1,

66636,IS,,ISO 5832-1:2016,Implants for surgery — Metallic materials — Part 1: Wrought stainless steel,Implants chirurgicaux — Produits à base de métaux — Partie 1: Acier inoxydable corroyé,2016-07-11,5,['11.040.40'],ISO/TC 150/SC 1,9599,"[51390,39023]",[83775],"['en','fr']",6,"<p>ISO 5832-1:2016 specifies the characteristics of, and corresponding test methods for, wrought stainless steel for use in the manufacture of surgical implants.</p><p>NOTE 1 The mechanical properties of a sample obtained from a finished product made of this alloy can differ from those specified in this part of ISO 5832.</p><p>NOTE 2 The alloy described in this part of ISO 5832 corresponds to UNS S31673 ref

1073,IS,,ISO 5832-10:1993,"Implants for surgery — Metallic materials — Part 10: Wrought titanium 5-aluminium 2,5-iron alloy","Implants chirurgicaux — Produits à base de métaux — Partie 10: Alliage à forger à base de titane, d'aluminium 5 et de fer 2,5",1993-09-16,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[23051],"['en','fr']",2,

21973,IS,,ISO 5832-11:1994,Implants for surgery — Metallic materials — Part 11: Wrought titanium 6-aluminium 7-niobium alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 11: Alliage à forger à base de titane, d'aluminium 6 et de niobium 7",1994-09-01,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[64615],"['en','fr']",2,"<p>Gives the characteristics of and corresonding test methods for, the wrought titanium alloy known as titanium 6-aluminium 7-niobium alloy (titanium 6-Al 7-Nb) for use in the manufacture of surgical implants.</p>"

64615,IS,,ISO 5832-11:2014,Implants for surgery — Metallic materials — Part 11: Wrought titanium 6-aluminium 7-niobium alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 11: Alliage à forger à base de titane, d'aluminium 6 et de niobium 7",2014-09-09,2,['11.040.40'],ISO/TC 150/SC 1,9599,[21973],[82122],"['en','fr']",2,"<p>ISO 5832-11:2014 specifies the characteristics of, and corresponding test methods for, the wrought titanium alloy known as titanium 6-aluminium 7-niobium alloy (Ti-6-Al 7-Nb) for use in the manufacture of surgical implants.</p>"

21532,IS,,ISO 5832-12:1996,Implants for surgery — Metallic materials — Part 12: Wrought cobalt-chromium-molybdenum alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 12: Alliage à forger à base de cobalt, de chrome et de molybdène",1996-06-27,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[39088],"['en','fr']",2,"<p>Specifies the characteristics of, and corresponding test methods for, wrought cobalt-chromium-molybdenum alloy for use in the manufacture of surgical implants.</p>"

39088,IS,,ISO 5832-12:2007,Implants for surgery — Metallic materials — Part 12: Wrought cobalt-chromium-molybdenum alloy,"Implants chirurgicaux — Matériaux métalliques — Partie 12: Alliage corroyé à base de cobalt, de chrome et de molybdène",2007-04-26,2,['11.040.40'],ISO/TC 150/SC 1,9599,[21532],[72594],"['en','fr','ru']",2,"<p>ISO 5832-12:2007 covers the requirements for two wrought cobalt 28 chromium 6 molybdenum alloys used for surgical implants. The properties apply specifically to wrought bar, rod and wire.</p>"

52282,IS,Cor,ISO 5832-12:2007/Cor 1:2008,Implants for surgery — Metallic materials — Part 12: Wrought cobalt-chromium-molybdenum alloy — Technical Corrigendum 1,"Implants chirurgicaux — Matériaux métalliques — Partie 12: Alliage corroyé à base de cobalt, de chrome et de molybdène — Rectificatif technique 1",2008-09-01,2,['11.040.40'],ISO/TC 150/SC 1,9599,,[72594],"['en','fr','ru']",1,

44018,IS,,ISO 5832-14:2007,Implants for surgery — Metallic materials — Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy,"Implants chirurgicaux — Matériaux métalliques — Partie 14: Alliage corroyé à base de titane, de molybdène-15, de zirconium-5 et d'aluminium-3",2007-10-15,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[72595],"['en','fr','ru']",3,"<p>ISO 5832-14:2007 specifies the characteristics of, and corresponding test methods for, the wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy for use in the manufacture of surgical implants. </p><p>ISO 5832-14:2007 applies to materials in bar form up to a maximum diameter of 100 mm.</p>"

11982,IS,,ISO 5832-2:1978,Implants for surgery — Metallic materials — Part 2: Unalloyed titanium,Implants chirurgicaux — Produits à base de métaux — Partie 2: Titane non allié,1978-07-01,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[11983],"['en','fr']",2,

11983,IS,,ISO 5832-2:1993,Implants for surgery — Metallic materials — Part 2: Unalloyed titanium,Implants chirurgicaux — Produits à base de métaux — Partie 2: Titane non allié,1993-09-16,2,['11.040.40'],ISO/TC 150/SC 1,9599,[11982],[26829],"['en','fr']",3,

26829,IS,,ISO 5832-2:1999,Implants for surgery — Metallic materials — Part 2: Unalloyed titanium,Implants chirurgicaux — Produits à base de métaux — Partie 2: Titane non allié,1999-08-05,3,['11.040.40'],ISO/TC 150/SC 1,9599,[11983],[69907],"['en','fr']",3,

69907,IS,,ISO 5832-2:2018,Implants for surgery — Metallic materials — Part 2: Unalloyed titanium,Implants chirurgicaux — Matériaux métalliques — Partie 2: Titane non allié,2018-03-21,4,['11.040.40'],ISO/TC 150/SC 1,9599,[26829],[88632],"['en','fr']",3,"<p>ISO 5832-2:2018 specifies the characteristics of, and corresponding test methods for, unalloyed titanium for use in the manufacture of surgical implants.</p><p>Six grades of titanium based on tensile strength are listed in Table 2.</p><p>NOTE The mechanical properties of a sample obtained from a finished product made of this metal do not necessarily comply with those specified in ISO 5832-2:2018.</p>"

11984,IS,,ISO 5832-3:1978,Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4-vanadium alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 3: Alliage à forger à base de titane, d'aluminium 6 et de vanadium 4",1978-04-01,1,['11.040.40'],ISO/TC 150,9599,,[11985],['en'],2,

11985,IS,,ISO 5832-3:1990,Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4-vanadium alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 3: Alliage à forger à base de titane, d'aluminium 6 et de vanadium 4",1990-11-22,2,['11.040.40'],ISO/TC 150/SC 1,9599,[11984],[23049],"['en','fr']",2,

23049,IS,,ISO 5832-3:1996,Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4-vanadium alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 3: Alliage à forger à base de titane, d'aluminium 6 et de vanadium 4",1996-06-27,3,['11.040.40'],ISO/TC 150/SC 1,9599,[11985],[66637],"['en','fr']",2,"<p>Specifies the characteristics of, and corresponding test methods for, the wrought titanium alloy known as titanium 6-aluminium 4-vanadium alloy (Ti 6-Al 4-V alloy) for use in the manufacture of surgical implants.</p>"

66637,IS,,ISO 5832-3:2016,Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4-vanadium alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 3: Alliage corroyé à base de titane, d'aluminium-6 et de vanadium-4",2016-10-06,4,['11.040.40'],ISO/TC 150/SC 1,9599,[23049],[79626],"['en','fr']",7,"<p>ISO 5832-3:2016 specifies the characteristics of, and corresponding test methods for, the wrought titanium alloy known as titanium 6-aluminium 4-vanadium alloy (Ti 6-AI4-V alloy) for use in the manufacture of surgical implants.</p><p>NOTE The mechanical properties of a sample obtained from a finished product made of this alloy may not necessarily compl

11986,IS,,ISO 5832-4:1978,Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum casting alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 4: Alliage à couler à base de cobalt, de chrome et de molybdène",1978-07-01,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[23050],"['en','fr']",1,

23050,IS,,ISO 5832-4:1996,Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum casting alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 4: Alliage à couler à base de cobalt, de chrome et de molybdène",1996-06-27,2,['11.040.40'],ISO/TC 150/SC 1,9599,[11986],[64614],"['en','fr']",2,"<p>Specifies the characteristics of, and corresponding test methods for, cobalt-chromium-molybdenum casting alloy for use in the manufacture of surgical implants.</p>"

64614,IS,,ISO 5832-4:2014,Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum casting alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 4: Alliage à couler à base de cobalt, de chrome et de molybdène",2014-09-09,3,['11.040.40'],ISO/TC 150/SC 1,9599,[23050],[82121],"['en','fr']",2,"<p>ISO 5832-4:2014 specifies the characteristics of, and corresponding test methods for, cobalt-chromium-molybdenum casting alloy for use in the manufacture of surgical implants.</p>"

11987,IS,,ISO 5832-5:1978,Implants for surgery — Metallic materials — Part 5: Wrought cobalt-chromium-tungsten- nickel alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 5: Alliage à forger à base de cobalt, de chrome, de tungstène et de nickel",1978-07-01,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[11988],"['en','fr']",1,

11988,IS,,ISO 5832-5:1993,Implants for surgery — Metallic materials — Part 5: Wrought cobalt-chromium-tungsten-nickel alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 5: Alliage à forger à base de cobalt, de chrome, de tungstène et de nickel",1993-09-16,2,['11.040.40'],ISO/TC 150/SC 1,9599,[11987],[35169],"['en','fr']",2,"<p>Specifies the characteristics (chemical composition, microstructure, tensile properties) and corresponding test methods for wrought CoCrWNiTi for use in the manufacture of surgical implants.</p>"

35169,IS,,ISO 5832-5:2005,Implants for surgery — Metallic materials — Part 5: Wrought cobalt-chromium-tungsten-nickel alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 5: Alliage corroyé à base de cobalt, de chrome, de tungstène et de nickel",2005-10-27,3,['11.040.40'],ISO/TC 150/SC 1,9599,[11988],[79955],"['en','fr','ru']",3,"<p>ISO 5832-5:2005 specifies the characteristics of, and corresponding test methods for, wrought cobalt-chromium-tungsten-nickel alloy for use in the manufacture of surgical implants.</p><p>The tensile properties of a sample obtained from a finished product made of this alloy might not necessarily comply with those specified in ISO 5832-5:2005.</p>" 351

11989,IS,,ISO 5832-6:1980,Implants for surgery — Metallic materials — Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 6: Alliage à forger à base de cobalt, de nickel, de chrome et de molybdène",1980-11-01,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[25357],"['en','fr']",1,

25357,IS,,ISO 5832-6:1997,Implants for surgery — Metallic materials — Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 6: Alliage corroyé à base de cobalt, de nickel, de chrome et de molybdène",1997-07-10,2,['11.040.40'],ISO/TC 150/SC 1,9599,[11989],[79956],"['en','fr']",2,

11990,IS,,ISO 5832-7:1984,Implants for surgery — Metallic materials — Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy,Implants pour la chirurgie — Produits à base de métaux — Partie 7: Alliage à forger mis en forme à froid à base de cobalt-chrome-nickel-molybdène-fer,1984-03-01,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[11991],"['en','fr']",2,

11991,IS,,ISO 5832-7:1994,Implants for surgery — Metallic materials — Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 7: Alliage à forger mis en forme à froid à base de cobalt, de chrome, de nickel, de molybdène et de fer",1994-02-10,2,['11.040.40'],ISO/TC 150/SC 1,9599,[11990],[69131],"['en','fr']",2,"<p>Specifies the characteristics of, and corresponding test methods for, the alloys. The characteristics are chemical composition, microstructure (grain size, inclusion content), and mechanical properties.</p>"

69131,IS,,ISO 5832-7:2016,Implants for surgery — Metallic materials — Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 7: Alliage à forger mis en forme à froid à base de cobalt, de chrome, de nickel, de molybdène et de fer",2016-11-14,3,['11.040.40'],ISO/TC 150/SC 1,9599,[11991],[83776],"['en','fr']",3,"<p>ISO 5832-7:2016 specifies the characteristics of, and corresponding test methods for, forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy for use in the manufacture of surgical implants.</p>"

11992,IS,,ISO 5832-8:1987,Implants for surgery — Metallic materials — Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy,"Implants chirurgicaux — Produits à base de métaux — Partie 8: Alliage à forger à base de cobalt, de nickel, de chrome, de molybdène, de tungstène et de fer",1987-08-20,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[21972],"['en','fr']",2,

11993,IS,,ISO 5832-9:1992,Implants for surgery — Metallic materials — Part 9: Wrought high nitrogen stainless steel,Implants chirurgicaux — Produits à base de métaux — Partie 9: Acier à forger inoxydable à haute teneur en azote,1992-10-15,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[39022],"['en','fr']",4,"<p>Specifies the characteristics (chemical composition, microstructure in fully annealed condition, inclusion content, corrosion resistance, mechanical properties) of, and corresponding test methods for, wrought stainless steel containing 0,25 % and 0,5 % nitrogen for use in the manufacture of surgical implants for which high levels of strength and corrosion resistance are required.</p>"

39022,IS,,ISO 5832-9:2007,Implants for surgery — Metallic materials — Part 9: Wrought high nitrogen stainless steel,Implants chirurgicaux — Matériaux métalliques — Partie 9: Acier inoxydable corroyé à haute teneur en azote,2007-06-12,2,['11.040.40'],ISO/TC 150/SC 1,9599,[11993],[72593],"['en','fr','ru']",5,"<p>ISO 5832-9:2007 specifies the characteristics of, and corresponding test methods for, wrought stainless steel containing a mass fraction of 0,25 % to 0,50 % nitrogen for use in the manufacture of surgical implants for which high levels of strength and corrosion resistance are required.</p>"

11994,IS,,ISO 5833-1:1979,Implants for surgery — Acrylic resin cements — Part 1: Orthopaedic applications,Implants chirurgicaux — Ciments à base de résine acrylique — Partie 1: Applications orthopédiques,1979-06-01,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[11995],"['en','fr']",9,

11995,IS,,ISO 5833:1992,Implants for surgery — Acrylic resin cements,Implants chirurgicaux — Ciments à base de résine acrylique,1992-11-25,1,['11.040.40'],ISO/TC 150/SC 1,9599,[11994],[30980],"['en','fr']",17,"<p>Applies to radio-opaque and non-radio-opaque self-curing resin cements on polymethacrylic acid esters and specifies physical, mechanical, packaging and labelling requirements and appropriate test methods. All requirements apply to, and all tests are to be performed on, the sterile product.</p>"

11997,IS,,ISO 5834-1:1985,Implants for surgery — Ultra-high molecular weight polyethylene — Part 1: Powder form,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 1: Produits sous forme de poudre,1985-07-04,1,['11.040.40'],ISO/TC 150/SC 1,9599,,[11998],"['en','fr']",10,

11998,IS,,ISO 5834-1:1998,Implants for surgery — Ultra-high molecular weight polyethylene — Part 1: Powder form,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 1: Produits sous forme de poudre,1998-08-06,2,['11.040.40'],ISO/TC 150/SC 1,9599,[11997],[39900],['en'],4,

39900,IS,,ISO 5834-1:2005,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 1: Produits sous forme de poudre,2005-06-15,3,['11.040.40'],ISO/TC 150/SC 1,9599,[11998],"[73674,54625]","['en','fr']",4,<p>ISO 5834-1:2005 specifies the requirements and corresponding test methods for moulding materials in powder form made from ultra-high-molecular-weight polyethylene (UHMWPE) for use in the manufacture of surgical implants.</p><p>It is not applicable to finished products.</p>

46108,IS,Cor,ISO 5834-1:2005/Cor 1:2007,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form — Technical Corrigendum 1,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 1: Produits sous forme de poudre — Rectificatif technique 1,2007-04-30,3,['11.040.40'],ISO/TC 150/SC 1,9599,,"[73674,54625]","['en','fr']",1,

73674,IS,,ISO 5834-1:2019,Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form,Implants chirurgicaux — Polyéthylène à très haute masse moléculaire — Partie 1: Produits sous forme de poudre,2019-02-12,4,['11.040.40'],ISO/TC 150/SC 1,9599,"[39900,46108]",[88634],"['en','fr']",4,<p>This document specifies the requirements and corresponding test methods for moulding materials in powder form made from ultra-high-molecular-weight polyethylene (UHMWPE) for use in the manufacture of surgical implants.</p><p>It is not applicable to finished products.</p>