Withdrawn and superseded ISO standards — page 134 of 246

11722,IS,,ISO 5636-4:1986,Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method,Papier et carton — Détermination de la perméabilité à l'air (valeur moyenne) — Partie 4: Méthode Sheffield,1986-07-24,1,['85.060'],ISO/TC 6/SC 2,9599,,"[36352,20677]","['en','fr']",7,"<p>Specfies detailed requirements and operating procedures applicable to specific types of apparatus, and is applicable to papers and boards having air permeances between 0,02 and 25 m/(Pa.s), being unsuitable for rough-surface papers such as creped and corrugared papers, which cannot be securely clamped to avoid leakage.</p>"

36352,IS,,ISO 5636-4:2005,Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method,Papier et carton — Détermination de la perméance à l'air (valeur moyenne) — Partie 4: Méthode Sheffield,2005-02-04,2,['85.060'],ISO/TC 6/SC 2,9599,[11722],[53061],"['en','fr','ru']",12,"<p>ISO 5636-4:2005 specifies a method of determining the air flow rate through unit area of a sheet of paper or board, under unit pressure difference using apparatus called the Sheffield instrument.</p><p>The method is applicable to papers and boards having air permeances between 0,02 micrometres per pascal second and 25 micrometres per pascal second. The method is not suitable for papers and b

11723,IS,,ISO 5636-5:1986,Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method,Papier et carton — Détermination de la perméabilité à l'air (valeur moyenne) — Partie 5: Méthode Gurley,1986-12-04,1,['85.060'],ISO/TC 6/SC 2,9599,,"[37376,23403]","['en','fr']",5,"<p>Specfies detailed requirements and operating procedures applicable to specific types of apparatus, and is applicable to papers and boards having air permeances between 0,1 and 100 m/(Pa.s), being unsuitable for rough-surface papers such as creped and corrugared papers, which cannot be securely clamped to avoid leakage.</p>"

11724,IS,Cor,ISO 5636-5:1986/Cor 1:1990,Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method — Technical Corrigendum 1,Papier et carton — Détermination de la perméabilité à l'air (valeur moyenne) — Partie 5: Méthode Gurley — Rectificatif technique 1,1990-09-06,1,['85.060'],ISO/TC 6/SC 2,9599,,[37376],"['en','fr']",1,

37376,IS,,ISO 5636-5:2003,Paper and board — Determination of air permeance and air resistance (medium range) — Part 5: Gurley method,Papier et carton — Détermination de la perméabilité à l'air et de la résistance à l'air (valeur moyenne) — Partie 5: Méthode Gurley,2003-06-19,2,['85.060'],ISO/TC 6/SC 2,9599,"[11723,11724]",[53062],"['en','fr']",8,"<p> ISO 5636-5:2003 specifies the Gurley method of determining the air permeance of paper and board. It is applicable to papers and boards which have air permeances between 0,1 micrometres per pascal second and 100 micrometres per pascal second. It is unsuitable for rough-surfaced materials, which cannot be securely clamped to avoid leakage.</p><p>T

11725,IS,,ISO 5637:1978,Paper and board — Determination of water absorption and increase in thickness after immersion in water,Papier et carton — Détermination de l'absorption d'eau et de l'augmentation d'épaisseur après immersion dans l'eau,1978-10-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[11726],"['en','fr']",2,

11726,IS,,ISO 5637:1989,Paper and board — Determination of water absorption after immersion in water,Papier et carton — Détermination de l'absorption d'eau après immersion dans l'eau,1989-11-02,2,['85.060'],ISO/TC 6/SC 2,9599,[11725],[83281],"['en','fr']",3,"<p>Is applicable to all types of paper and board which have a degree of water resistance, and it is not applicable to very absorbent papers such as toilet tissue.</p>"

11731,IS,,ISO 5647:1990,Paper and board — Determination of titanium dioxide content,Papier et carton — Détermination de la teneur en dioxyde de titane,1990-11-22,1,['85.060'],ISO/TC 6,9599,,[76078],"['en','fr']",4,"<p>Specifies a method for determining titanium dioxide content in all kinds of paper and board, in particular coated or filled products. It comprises two procedures for the final determination of titanium based on spectrophotometry and flame atomic absorption spectrophotometry, respectively. The limits of determination depend on the amount of sample taken. Titanium present in other forms will not interfere in the determination.</p>"

4655,IS,,ISO 565:1983,"Test sieves — Woven metal wire cloth, perforated plate and electroformed sheet — Nominal sizes of openings","Tamis de contrôle — Tissus métalliques, tôles perforées et feuilles électroformées — Dimensions nominales des ouvertures",1983-07-01,2,['19.120'],ISO/TC 24/SC 8,9599,,[4656],['en'],2,

11734,IS,,ISO 5651:1978,"Paper, board and pulps — Units for expressing properties","Papiers, cartons et pâtes — Unités pour l'expression des propriétés",1978-12-01,1,"['85.060','85.040']",ISO/TC 6/SC 2,9599,,[11735],"['en','fr']",6,

11736,IS,,ISO 5652:1983,"Information processing — 9-Track, 12,7 mm (0.5 in) wide magnetic tape for information interchange — Format and recording, using group coding at 264 cpmm (6 250 cpi)","Traitement de l'information — Bande magnétique à 9 pistes de 12,7 mm (0,5 in) de large pour l'échange d'information — Format et enregistrement utilisant des codages de groupe à 264 cpmm (6 250 cpi)",1983-01-01,1,['35.220.22'],ISO/IEC JTC 1,9599,,[11737],"['en','fr']",15,

11739,IS,,ISO 5654-1:1982,"Information processing — Data interchange on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad on one side — Part 1: Dimensional, physical and magnetic characteristics","Traitement de l'information — Échange d'information sur cartouches à disquette de 200 mm (8 in) utilisant un enregistrement à double fréquence à 13 262 ftprad sur une face — Partie 1: Caractéristiques dimensionnelles, physiques et magnétiques",1982-12-01,1,['35.220.21'],ISO/IEC JTC 1,9599,,[11740],"['en','fr']",17,

11741,IS,,ISO 5654-2:1982,Information processing — Data interchange on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad on one side — Part 2: Track format,Traitement de l'information — Échange d'information sur cartouches à disquette de 200 mm (8 in) utilisant un enregistrement à double fréquence à 13 262 ftprad sur une face — Partie 2: Schéma de piste,1982-12-01,1,['35.220.21'],ISO/IEC JTC 1,9599,,[11742],"['en','fr']",7,

11743,IS,,ISO 5655:1982,"Photography — Film for industrial radiography — Sizes, quantity packaging and labelling","Photographie — Film pour la radiographie industrielle — Dimensions, unité de conditionnement et étiquetage",1982-12-01,1,"['37.040.20','19.100']",ISO/TC 42,9599,,[11744],"['en','fr']",3,

11744,IS,,ISO 5655:1993,Photography — Film dimensions — Industrial radiography,Photographie — Dimensions des films — Radiographie industrielle,1993-10-21,2,['37.040.25'],ISO/TC 42,9599,[11743],[32371],"['en','fr']",7,

11747,IS,,ISO 5657:1986,Fire tests — Reaction to fire — Ignitability of building products,Essais au feu — Réaction au feu — Allumabilité des produits de bâtiment,1986-12-18,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[22128],"['en','fr']",32,

11748,IS,,ISO 5658-2:1996,Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building products in vertical configuration,Essais de réaction au feu — Propagation du feu — Partie 2: Propagation latérale sur les produits de bâtiment en position verticale,1996-08-15,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[36963],"['en','fr']",23,<p>Describes a method of test for measuring the lateral spread of flame along the surface of a specimen of a building product orientated in the vertical position. Provides data for comparing the performance of essentially flat materials which are used primarily as the exposed surface of walls.</p>

20407,IS,,ISO 5659-1:1996,Plastics — Smoke generation — Part 1: Guidance on optical-density testing,Plastiques — Production de fumée — Partie 1: Guide sur les essais de densité optique,1996-03-28,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,"[52862,39600]","['en','fr']",7,<p>Part 1 constitutes the guidance document of ISO 5659 for the test procedure described in part 2.</p>

11752,IS,,ISO 5659-2:1994,Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test,Plastiques — Production de fumée — Partie 2: Détermination de la densité optique par un essai en enceinte unique,1994-12-15,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,[31270],"['en','fr']",29,"<p>Specifies a method of measuring smoke production from the exposed surface of specimens of essentially flat materials, composites or assemblies not exceeding 25 mm in thickness when placed in a horizontal orientation and subjected to specified levels of thermal irradiance in a closed cabinet with or without the application of a pilot flame. This method of test is applicabl

28423,IS,Cor,ISO 5659-2:1994/Cor 1:1997,Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1,Plastiques — Production de fumée — Partie 2: Détermination de la densité optique par un essai en enceinte unique — Rectificatif technique 1,1997-02-27,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,[31270],"['en','fr']",2,"<p>Replaces the existing table 1 and contains corrections relating to the foreword, the clause 13 and the table B.2.</p>"

31270,IS,,ISO 5659-2:2006,Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test,Plastiques — Production de fumée — Partie 2: Détermination de la densité optique par un essai en enceinte unique,2006-11-29,2,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,"[11752,28423]",[52862],"['en','fr']",36,"<p>ISO 5659-2:2006 specifies a method of measuring smoke production from the exposed surface of specimens of essentially flat materials, composites or assemblies not exceeding 25 mm in thickness when placed in a horizontal orientation and subjected to specified levels of thermal irradiance in a closed cabinet with or without the application of a pilot flame. T

52862,IS,,ISO 5659-2:2012,Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test,Plastiques — Production de fumée — Partie 2: Détermination de la densité optique par un essai en enceinte unique,2012-11-28,3,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,"[31270,20407]",[65243],"['en','fr']",44,"<p>ISO 5659-2:2012 specifies a method of measuring smoke production from the exposed surface of specimens of materials, composites or assemblies. It is applicable to specimens that have an essentially flat surface and do not exceed 25 mm in thickness when placed in a horizontal orientation and subjected to specified levels of thermal irradiance in a closed cab

65243,IS,,ISO 5659-2:2017,Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test,Plastiques — Production de fumée — Partie 2: Détermination de la densité optique par un essai en enceinte unique,2017-05-23,4,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,[52862],[86322],"['en','fr']",49,"<p>ISO 5659-2:2017 specifies a method of measuring smoke production from the exposed surface of specimens of materials or composites. It is applicable to specimens that have an essentially flat surface and do not exceed 25 mm in thickness when placed in a horizontal orientation and subjected to specified levels of thermal irradiance in a closed cabinet with or without

11753,IS,,ISO 5660-1:1993,Fire tests — Reaction to fire — Part 1: Rate of heat release from building products — (Cone calorimeter method),Essais au feu — Réaction au feu — Partie 1: Débit calorifique des produits du bâtiment — (Méthode au calorimètre conique),1993-06-10,1,['13.220.50'],ISO/TC 92/SC 1,9599,,"[35351,23911]","['en','fr']",31,<p>The rate of heat release is determined by measuring the oxygen consumption derived from the oxygen concentration and the flow rate in the combustion product stream. The time to ignition (sustained flaming) is also measured. Products with surface irregularities may be tested according to specific requirements.</p>

22833,IS,Cor,ISO 5660-1:1993/Cor 1:1993,Fire tests — Reaction to fire — Part 1: Rate of heat release from building products — (Cone calorimeter method) — Technical Corrigendum 1,Essais au feu — Réaction au feu — Partie 1: Débit calorifique des produits du bâtiment — (Méthode au calorimètre conique) — Rectificatif technique 1,1993-10-21,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[35351],"['en','fr']",1,<p>Replaces equations (F.9) and (F.10) in clause F.4.</p>

35351,IS,,ISO 5660-1:2002,"Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method)","Essais de réaction au feu — Débit calorifique, taux de dégagement de fumée et taux de perte de masse — Partie 1: Débit calorifique (méthode au calorimètre conique)",2002-12-06,2,['13.220.50'],ISO/TC 92/SC 1,9599,"[11753,22833]",[57957],['en'],39,<p>ISO 5660-1:2002 specifies a method for assessing the heat release rate of a specimen exposed in the horizontal orientation to controlled levels of irradiance with an external igniter. The heat release rate is determined by measurement of the oxygen consumption derived from the oxygen concentr

32431,IS,,ISO 5660-2:2002,"Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 2: Smoke production rate (dynamic measurement)","Essais de réaction au feu — Débit calorifique, taux de dégagement de fumée et taux de perte de masse — Partie 2: Taux de dégagement de fumée (mesure dynamique)",2002-12-09,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[57957],['en'],14,"<p>ISO 5660-2:2002 specifies a small-scale method for assessing the dynamic smoke production rate of essentially flat specimens exposed to controlled levels of radiant heating under well-ventilated conditions with or without an external igniter. The rate of smoke production is calculated from measurement of the a

11755,IS,,ISO 5662:1978,Petroleum products — Electrical insulating oils — Detection of corrosive sulphur,Produits pétroliers — Huiles isolantes électriques — Détection du soufre corrosif,1978-02-01,1,['29.040.10'],ISO/TC 28,9599,,[24855],"['en','fr']",2,

11759,IS,,ISO 5666-1:1983,Water quality — Determination of total mercury by flameless atomic absorption spectrometry — Part 1: Method after digestion with permanganate-peroxodisulfate,Qualité de l'eau — Dosage du mercure total par spectrométrie d'absorption atomique sans flamme — Partie 1: Méthode après minéralisation au permanganate-peroxodisulfate,1983-07-01,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[29919],"['en','fr']",6,

29919,IS,,ISO 5666:1999,Water quality — Determination of mercury,Qualité de l'eau — Dosage du mercure,1999-05-06,1,['13.060.50'],ISO/TC 147/SC 2,9599,"[11759,11760]",[51964],"['en','fr']",16,

11760,IS,,ISO 5666-2:1983,Water quality — Determination of total mercury by flameless atomic absorption spectrometry — Part 2: Method after pretreatment with ultraviolet radiation,Qualité de l'eau — Dosage du mercure total par spectrométrie d'absorption atomique sans flamme — Partie 2: Méthode après minéralisation par irradiation aux rayons ultraviolets,1983-07-01,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[29919],"['en','fr']",8,

11762,IS,,ISO 5667-1:1980,Water quality — Sampling — Part 1: Guidance on the design of sampling programmes,Qualité de l'eau — Échantillonnage — Partie 1: Guide général pour l'établissement des programmes d'échantillonnage,1980-09-01,1,['13.060.45'],ISO/TC 147/SC 6,9599,,[36693],"['en','fr']",13,"<p>Sets out the general principles to be applied for the purposes of quality control, quality characterization, and identification of sources of pollution of water, including bottom deposits and sludges. Is intended to be used in conjunction with ISO 5667-2 and ISO 5667-3.</p>"

26726,IS,Cor,ISO 5667-1:1980/Cor 1:1996,Water quality — Sampling — Part 1: Guidance on the design of sampling programmes — Technical Corrigendum 1,Qualité de l'eau — Échantillonnage — Partie 1: Guide général pour l'établissement des programmes d'échantillonnage — Rectificatif technique 1,1996-02-01,1,['13.060.45'],ISO/TC 147/SC 6,9599,,[36693],"['en','fr']",1,<p>Corrects an expression in subclause 16.4.</p>

36693,IS,,ISO 5667-1:2006,Water quality — Sampling — Part 1: Guidance on the design of sampling programmes and sampling techniques,Qualité de l'eau — Échantillonnage — Partie 1: Lignes directrices pour la conception des programmes et des techniques d'échantillonnage,2006-12-14,2,['13.060.45'],ISO/TC 147/SC 6,9599,"[11762,11764,26726]",[72369],"['en','fr','ru']",31,"<p>ISO 5667-1:2006 sets out the general principles for, and provides guidance on, the design of sampling programmes and sampling techniques for all aspects of sampling of water (including waste waters, sludges, effluents and bottom deposits). </p>"

72369,IS,,ISO 5667-1:2020,Water quality — Sampling — Part 1: Guidance on the design of sampling programmes and sampling techniques,Qualité de l'eau — Échantillonnage — Partie 1: Recommandations relatives à la conception des programmes et des techniques d’échantillonnage,2020-12-03,3,['13.060.45'],ISO/TC 147/SC 6,9599,[36693],[84099],"['en','fr']",39,"<p>This document sets out the general principles for, and provides guidance on, the design of sampling programmes and sampling techniques for all aspects of sampling of water (including waste waters, sludges, effluents, suspended solids and sediments).</p><p>It does not include detailed instructions for specific sampling situations, which are co

11773,IS,,ISO 5667-10:1992,Water quality — Sampling — Part 10: Guidance on sampling of waste waters,Qualité de l'eau — Échantillonnage — Partie 10: Guide pour l'échantillonnage des eaux résiduaires,1992-11-12,1,['13.060.30'],ISO/TC 147/SC 6,9599,,[70934],"['en','fr']",10,"<p>Contains details on the sampling of domestic and industrial waste water, i.e. the design of sampling programmes and techniques for collection of samples including safety aspects. Covers waste water in all its forms. Sampling of accidental spillages is not included, although the methods described in certain cases may also be applicable to spillages.</p>"

11774,IS,,ISO 5667-11:1993,Water quality — Sampling — Part 11: Guidance on sampling of groundwaters,Qualité de l'eau — Échantillonnage — Partie 11: Guide général pour l'échantillonnage des eaux souterraines,1993-03-11,1,"['13.060.10','13.060.45']",ISO/TC 147/SC 6,9599,,[42990],"['en','fr']",10,"<p>Provides guidance on the design of sampling programmes, sampling techniques and the handling of water samples taken from groundwater for physical, chemical and microbiological assessment. The general purpose of sampling programmes for groundwaters is to survey the quality of groundwater supplies, to detect and assess groundwater pollution, to assist in groundwater resource management, and other mor

11776,IS,,ISO 5667-12:1995,Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments,Qualité de l'eau — Échantillonnage — Partie 12: Guide général pour l'échantillonnage des sédiments,1995-11-23,1,['13.060.45'],ISO/TC 147/SC 6,9599,,[59903],['en'],34,"<p>Provides guidance on the sampling of sediments from rivers, streams, lakes and similar standing waters and estuarines. Sampling of industrial and sewage works sludges and ocean sediments are excluded.</p>"

22493,IS,,ISO 5667-13:1997,Water quality — Sampling — Part 13: Guidance on sampling of sludges from sewage and water treatment works,Qualité de l'eau — Échantillonnage — Partie 13: Guide pour l'échantillonnage de boues provenant d'installations de traitement de l'eau et des eaux usées,1997-12-11,1,"['13.060.30','13.060.45']",ISO/TC 147/SC 6,9599,,[45450],"['en','fr']",20,

24199,IS,,ISO 5667-14:1998,Water quality — Sampling — Part 14: Guidance on quality assurance of environmental water sampling and handling,Qualité de l'eau — Échantillonnage — Partie 14: Lignes directrices pour le contrôle de la qualité dans l'échantillonnage et la manutention des eaux environnementales,1998-09-03,1,['13.060.45'],ISO/TC 147/SC 6,9599,,[55452],['en'],18,

25156,IS,,ISO 5667-15:1999,Water quality — Sampling — Part 15: Guidance on preservation and handling of sludge and sediment samples,Qualité de l'eau — Échantillonnage — Partie 15: Guide général pour la préservation et le traitement des échantillons de boues et de sédiments,1999-07-29,1,"['13.060.30','13.060.45']",ISO/TC 147/SC 6,9599,,[42892],['en'],7,

42892,IS,,ISO 5667-15:2009,Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples,Qualité de l'eau — Échantillonnage — Partie 15: Lignes directrices pour la conservation et le traitement des échantillons de boues et de sédiments,2009-08-04,2,"['13.060.30','13.060.45']",ISO/TC 147/SC 6,9599,[25156],[88508],"['en','fr']",17,"<p>ISO 5667-15:2009 provides guidance on procedures for the preservation, handling and storage of samples of sewage and waterworks sludge, suspended matter, saltwater sediments and freshwater sediments, until chemical, physical, radiochemical and/or biological examination can be undertaken in the laboratory.</p><p>The p

25157,IS,,ISO 5667-16:1998,Water quality — Sampling — Part 16: Guidance on biotesting of samples,Qualité de l'eau — Échantillonnage — Partie 16: Lignes directrices pour les essais biologiques des échantillons,1998-10-08,1,['13.060.45'],ISO/TC 147/SC 6,9599,,"[65556,62577]","['en','fr']",32,

26175,IS,,ISO 5667-17:2000,Water quality — Sampling — Part 17: Guidance on sampling of suspended sediments,Qualité de l'eau — Échantillonnage — Partie 17: Lignes directrices pour l'échantillonnage des sédiments en suspension,2000-07-20,1,['13.060.45'],ISO/TC 147/SC 6,9599,,[42891],['en'],12,

29025,IS,,ISO 5667-18:2001,Water quality — Sampling — Part 18: Guidance on sampling of groundwater at contaminated sites,Qualité de l'eau — Échantillonnage — Partie 18: Lignes directrices pour l'échantillonnage des eaux souterraines sur des sites contaminés,2001-04-19,1,"['13.060.10','13.060.45']",ISO/TC 147/SC 6,9599,,[42990],['en'],23,

51189,IS,Cor,ISO 5667-18:2001/Cor 1:2008,Water quality — Sampling — Part 18: Guidance on sampling of groundwater at contaminated sites — Technical Corrigendum 1,Qualité de l'eau — Échantillonnage — Partie 18: Lignes directrices pour l'échantillonnage des eaux souterraines sur des sites contaminés — Rectificatif technique 1,2008-02-26,1,"['13.060.10','13.060.45']",ISO/TC 147/SC 6,9599,,[42990],['en'],1,

11763,IS,,ISO 5667-2:1982,Water quality — Sampling — Part 2: Guidance on sampling techniques,Qualité de l'eau — Échantillonnage — Partie 2: Guide général sur les techniques d'échantillonnage,1982-07-01,1,['13.060.45'],ISO/TC 147/SC 6,9599,,[11764],"['en','fr']",8,

11764,IS,,ISO 5667-2:1991,Water quality — Sampling — Part 2: Guidance on sampling techniques,Qualité de l'eau — Échantillonnage — Partie 2: Guide général sur les techniques d'échantillonnage,1991-07-18,2,['13.060.45'],ISO/TC 147/SC 6,9599,[11763],[36693],"['en','fr']",9,<p>Does not include detailed instructions for specific sampling situations and sampling procedures. This second edition cancels and replaces the first edition (1982). Annex A forms an integral part of this standard.</p>

11765,IS,,ISO 5667-3:1985,Water quality — Sampling — Part 3: Guidance on the preservation and handling of samples,Qualité de l'eau — Échantillonnage — Partie 3: Guide général pour la conservation et la manipulation des échantillons,1985-07-11,1,['13.060.01'],ISO/TC 147/SC 6,9599,,[11766],"['en','fr']",13,

11766,IS,,ISO 5667-3:1994,Water quality — Sampling — Part 3: Guidance on the preservation and handling of samples,Qualité de l'eau — Échantillonnage — Partie 3: Guide général pour la conservation et la manipulation des échantillons,1994-07-28,2,['13.060.45'],ISO/TC 147/SC 6,9599,[11765],[33486],"['en','fr']",31,"<p>Gives general guidelines on the precautions to be taken to preserve and transport water samples (filling the container, use of appropriate containers, preparation of containers, cooling or freezing of the samples, filtration or centrifuging of samples, techniques generally suitable for the preservation of samples). These guidelines are particularly appropriate when a sample (spot

33486,IS,,ISO 5667-3:2003,Water quality — Sampling — Part 3: Guidance on the preservation and handling of water samples,Qualité de l'eau — Échantillonnage — Partie 3: Lignes directrices pour la conservation et la manipulation des échantillons d'eau,2003-12-09,3,['13.060.45'],ISO/TC 147/SC 6,9599,[11766],[53569],"['en','fr']",31,<p>ISO 5667-3:2003 gives general guidelines on the precautions to be taken to preserve and transport all water samples including those for biological analyses but not those intended for microbiological analysis.</p><p>These guidelines are particularly appropriate when spot or composite samples cannot be analysed on-site and have to be transported to a laboratory for a

53569,IS,,ISO 5667-3:2012,Water quality — Sampling — Part 3: Preservation and handling of water samples,Qualité de l'eau — Échantillonnage — Partie 3: Conservation et manipulation des échantillons d'eau,2012-11-15,4,['13.060.45'],ISO/TC 147/SC 6,9599,[33486],[72370],"['en','fr','ru']",42,"<p>ISO 5667-3:2012 establishes general requirements for sampling, preservation, handling, transport and storage of all water samples including those for biological analyses. It is not applicable to water samples intended for microbiological analyses as specified in ISO 19458, ecotoxicological assays, biological assays, and passive sampling as specified in the scope of ISO 5667-23.</p><p>ISO 5667-3:2012 is p

72370,IS,,ISO 5667-3:2018,Water quality — Sampling — Part 3: Preservation and handling of water samples,Qualité de l'eau — Échantillonnage — Partie 3: Conservation et manipulation des échantillons d'eau,2018-05-11,5,['13.060.45'],ISO/TC 147/SC 6,9599,[53569],[82273],"['en','fr']",52,"<p>This document specifies general requirements for sampling, preservation, handling, transport and storage of all water samples including those for biological analyses. </p><p>It is not applicable to water samples intended for microbiological analyses as specified in ISO 19458, ecotoxicological assays, biological assays and passive sampling as specified in the scope of ISO 5667‑23.</p><p>This document is partic

11767,IS,,ISO 5667-4:1987,"Water quality — Sampling — Part 4: Guidance on sampling from lakes, natural and man-made",Qualité de l'eau — Échantillonnage — Partie 4: Guide pour l'échantillonnage des eaux des lacs naturels et des lacs artificiels,1987-04-16,1,"['13.060.10','13.060.45']",ISO/TC 147/SC 6,9599,,[55450],"['en','fr']",5,"<p>Presents detailed principles to be applied to the design of programmes, techniques and the handling and preservation of samples of water. The main objectives are measurements of quality characterization, of quality control and for specific reasons. Microbiological examinations are not included.</p>"

55450,IS,,ISO 5667-4:2016,"Water quality — Sampling — Part 4: Guidance on sampling from lakes, natural and man-made",Qualité de l'eau — Échantillonnage — Partie 4: Lignes directrices pour l'échantillonnage des eaux des lacs naturels et des lacs artificiels,2016-06-23,2,"['13.060.10','13.060.45']",ISO/TC 147/SC 6,9599,[11767],[91638],['en'],34,"<p>ISO 5667-4:2016 gives guidelines for the design of sampling programmes, techniques and the handling and preservation of samples of water, from natural and man-made lakes during open-water and ice-covered conditions. It is applicable to lakes with and without aquatic vegetation.</p><p>Guidance on sampling for microbiological examination is not includ

11768,IS,,ISO 5667-5:1991,Water quality — Sampling — Part 5: Guidance on sampling of drinking water and water used for food and beverage processing,Qualité de l'eau — Échantillonnage — Partie 5: Guide pour l'échantillonnage de l'eau potable et de l'eau utilisée dans l'industrie alimentaire et des boissons,1991-05-16,1,"['13.060.20','13.060.45']",ISO/TC 147/SC 6,9599,,[36694],"['en','fr']",8,"<p>Establishes detailed principles to be applied to the design of sampling programmes, to sampling techniques and to handling and preservation of water samples. This part does not include the sampling of sources (to which applies ISO 5667).</p>"

11769,IS,,ISO 5667-6:1990,Water quality — Sampling — Part 6: Guidance on sampling of rivers and streams,Qualité de l'eau — Échantillonnage — Partie 6: Guide pour l'échantillonnage des rivières et des cours d'eau,1990-12-20,1,"['13.060.10','13.060.45']",ISO/TC 147/SC 6,9599,,[34815],"['en','fr']",9,"<p>Sets out the principles to be applied to the design of sampling programmes, sampling techniques and the handling of water samples for physical, chemical and microbiological assessment. Does not apply to the sampling of estuarine or coastal waters and is of limited applicability to the sampling of canals and other inland waters with restricted flow regimes.</p>"

34815,IS,,ISO 5667-6:2005,Water quality — Sampling — Part 6: Guidance on sampling of rivers and streams,Qualité de l'eau — Échantillonnage — Partie 6: Lignes directrices pour l'échantillonnage des rivières et des cours d'eau,2005-07-22,2,"['13.060.10','13.060.45']",ISO/TC 147/SC 6,9599,[11769],[55451],"['en','ru']",16,"<p>ISO 5667-6:2005 sets out the principles to be applied to the design of sampling programmes, sampling techniques and the handling of water samples from rivers and streams for physical and chemical assessment.</p><p>It is not applicable to the sampling of estuarine or coastal waters and has limited applicability to microbiological sampling.</p><p>It is also not applicable to

4658,IS,,ISO 567:1974,Coke — Determination of the bulk density in a small container,Coke — Détermination de la masse volumique en vrac dans un récipient de petites dimensions,1974-10-01,1,['75.160.10'],ISO/TC 27/SC 3,9599,,[1995],"['en','fr']",2,

1995,IS,,ISO 567:1995,Coke — Determination of bulk density in a small container,Coke — Détermination de la masse volumique en vrac dans un récipient de petites dimensions,1995-06-22,2,['75.160.10'],ISO/TC 27/SC 3,9599,[4658],[78697],['en'],2,"<p>Cancels and replaces the first edition (1974). Specifies a method for the determination of the bulk density of coke in a cubical container of capacity of 0,2 m^3. Applicable to coke with a nominal top size not greater than 125 mm.</p>"

11779,IS,,ISO 5673:1980,Agricultural tractors — Power take-off drive shafts for machines and implements,Tracteurs agricoles — Arbre de transmission à cardans de prise de force pour machines et instruments,1980-11-01,1,['65.060'],ISO/TC 23/SC 4,9599,,[11780],"['en','fr']",5,

11780,IS,,ISO 5673:1993,Agricultural tractors and machinery — Power take-off drive shafts and position of power-input connection,Tracteurs et matériels agricoles — Arbres de transmission à cardans de prise de force et position de l'arbre récepteur sur la machine,1993-11-25,2,['65.060.01'],ISO/TC 23/SC 4,9599,[11779],"[36738,36739]","['en','fr']",6,<p>Specifies a system for classifying power take-off (PTO) drive shafts; the requirements for PTO yoke bosses; the PTO drive shaft sizes; the positioning of the power input connection for PTO-driven implements; the clearance zones. Applies to PTO drive shafts required for the connection of agricultural machines and implements to tractors.</p> 11781

11782,IS,,ISO 5674-1:1992,Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Part 1: Strength test,Tracteurs et matériels agricoles et forestiers — Protecteurs d'arbres de transmission à cardans de prise de force — Partie 1: Essai de résistance,1992-05-28,1,['65.060.01'],ISO/TC 23/SC 2,9599,[11781],[32988],"['en','fr']",6,"<p>Specifies the test methods and requirements for determining the robustness and durability of guards. Because of possible re-export to countries with extreme temperatures, a temperature of - 35 °C has been specified for some tests.</p>"

11781,IS,,ISO 5674:1982,Tractors and machinery for agriculture and forestry — Guards for power take-off drive shafts — Test methods,Tracteurs et matériels pour l'agriculture et la sylviculture — Protecteurs d'arbres de transmission à cardans de prise de force — Méthodes d'essai,1982-07-01,1,['65.060'],ISO/TC 23/SC 2,9599,,"[11783,11782]","['en','fr']",4,

11783,IS,,ISO 5674-2:1992,Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Part 2: Wear test,Tracteurs et matériels agricoles et forestiers — Protecteurs d'arbres de transmission à cardans de prise de force — Partie 2: Essai d'usure,1992-05-28,1,['65.060.01'],ISO/TC 23/SC 2,9599,[11781],[32988],"['en','fr']",5,"<p>Specifies the requirements and the laboratory test methods for determining the resistance against wear of guards. If this wear test is to be carried out, it shall be undertaken on the same guard but before the strength test (in ISO 5674-1).</p>"

32988,IS,,ISO 5674:2004,Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria,Tracteurs et matériels agricoles et forestiers — Protecteurs d'arbres de transmission à cardans de prise de force — Essais de résistance mécanique et d'usure et critères d'acceptation,2004-02-27,2,['65.060.01'],ISO/TC 23/SC 2,9599,"[11783,11782]",[78316],"['en','fr']",23,"<p>ISO 5674:2004 specifies laboratory tests for determining the strength and wear resistance of guards for PTO drive shafts on tractors and machinery used in agriculture and forestry, and their acceptance criteria. It is intended to be used in combinatio

11785,IS,,ISO 5675:1981,Agricultural tractors and machinery — Hydraulic couplers for general purposes — Specifications,Tracteurs et matériels agricoles — Coupleurs hydrauliques à usage général — Spécifications,1981-11-01,1,['65.060.10'],ISO/TC 23/SC 4,9599,,[11786],"['en','fr']",3,

11786,IS,,ISO 5675:1992,Agricultural tractors and machinery — General purpose quick-action hydraulic couplers,Tracteurs et matériels agricoles — Coupleurs hydrauliques à usage général,1992-03-12,2,['65.060.01'],ISO/TC 23/SC 4,9599,[11785],[41234],"['en','fr']",4,<p>Specifies the essential interface dimensions and the operating requirements for hydraulic front-mounted and rear-mounted couplers. Does not apply to couplers used for braking circuits.</p>

41234,IS,,ISO 5675:2008,Agricultural tractors and machinery — General purpose quick-action hydraulic couplers,Tracteurs et matériels agricoles — Coupleurs hydrauliques à usage général,2008-08-11,3,['65.060.10'],ISO/TC 23/SC 4,9599,[11786],[76702],"['en','fr']",5,"<p>ISO 5675:2008 specifies the essential interface dimensions, as defined in ISO 7241-1, and the operating requirements for hydraulic couplers employed to transmit hydraulic power from agricultural tractors to agricultural machinery. It is applicable to couplers used in hydraulic lines other than those used for braking circuits (see ISO 5676).</p>"

11787,IS,,ISO 5676:1983,Tractors and machinery for agriculture and forestry — Hydraulic coupling — Braking circuit,Tracteurs et matériels agricoles et forestiers — Coupleurs hydrauliques — Circuit de freinage,1983-08-01,1,['65.060.01'],ISO/TC 23/SC 4,9599,,[79861],"['en','fr']",2,"<p>Specifies the conditions for interchangeability, and the operating characteristics and lays down the technical specifications for tests, for the hydrauic couplings on braking systems for towed machinery. Applies solely to hydraulic brake couplings. A figure illustrates the dimensions of the coupler.</p>"

11788,IS,,ISO 5678:1979,Equipment for working the soil — Clearance zones and main dimensions for S-Type cultivator tines,Matériel de travail du sol — Zones de dégagement et principales dimensions pour les dents de cultivateur de type S,1979-04-01,3,['65.060.20'],ISO/TC 23,9599,,[11789],"['en','fr']",3,

4659,IS,,ISO 568:1976,Textile machinery and accessories — Heald frames for single or double row of healds — Designation of dimensions,Matériel pour l'industrie textile — Cadres de lisses pour simple ou double rangée de lisses — Désignation des dimensions,1976-08-01,1,['59.120.30'],ISO/TC 72/SC 3,9599,,"[1204,1582]","['en','fr']",1,

11793,IS,,ISO 5681:1981,Equipment for crop protection — Vocabulary,Matériel de traitement agropharmaceutique — Vocabulaire,1981-05-01,1,"['01.040.65','65.060.40']",ISO/TC 23/SC 6,9599,,[11794],"['en','fr']",20,

11794,IS,,ISO 5681:1992,Equipment for crop protection — Vocabulary,Matériel de traitement phytopharmaceutique — Vocabulaire,1992-10-29,2,"['01.040.65','65.060.40']",ISO/TC 23/SC 6,9599,[11793],"[72299,62808]","['en','fr']",16,"<p>Defines 9 general terms, 146 terms for equipment for applying sprays, 11 terms for equipment for applying dust, 8 terms for equipment for applying granules, and 23 other terms.</p>"

11795,IS,,ISO 5682-1:1981,Equipment for crop protection — Spraying equipment — Part 1: Test methods of sprayer nozzles,Matériel de traitement agropharmaceutique — Équipements de pulvérisation — Partie 1: Méthodes d'essai des buses de pulvérisation,1981-07-01,1,['65.060.40'],ISO/TC 23/SC 6,9599,,[20601],"['en','fr']",14,

20601,IS,,ISO 5682-1:1996,Equipment for crop protection — Spraying equipment — Part 1: Test methods for sprayer nozzles,Matériel de protection des cultures — Équipement de pulvérisation — Partie 1: Méthodes d'essai des buses de pulvérisation,1996-12-26,2,['65.060.40'],ISO/TC 23/SC 6,9599,[11795],[60053],"['en','fr']",18,<p>Describes methods for estimating the accuracy of hydraulic sprayer nozzles for hydraulic spraying. Replaces the first edition.</p>

11797,IS,,ISO 5682-2:1986,Equipment for crop protection — Spraying equipment — Part 2: Test methods for agricultural sprayers,Matériel de traitement agropharmaceutique — Équipements de pulvérisation — Partie 2: Méthodes d'essai des pulvérisateurs agricoles,1986-02-13,1,['65.060.40'],ISO/TC 23/SC 6,9599,,[25409],"['en','fr']",5,

25409,IS,,ISO 5682-2:1997,Equipment for crop protection — Spraying equipment — Part 2: Test methods for hydraulic sprayers,Matériel de protection des cultures — Équipement de pulvérisation — Partie 2: Méthodes d'essai des pulvérisateurs à jet projeté,1997-06-05,2,['65.060.40'],ISO/TC 23/SC 6,9599,[11797],[60054],"['en','fr']",9,

11798,IS,,ISO 5682-3:1996,Equipment for crop protection — Spraying equipment — Part 3: Test method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers,Matériel de protection des cultures — Équipement de pulvérisation — Partie 3: Méthode d'essai des systèmes de régulation du volume/hectare des pulvérisateurs agricoles à jet projeté,1996-12-26,1,['65.060.40'],ISO/TC 23/SC 6,9599,,[60055],"['en','fr']",6,<p>Specifies the test method for volume/hectare adjustment systems of sprayers in order to assess precision of spraying and performance. Suitable for agricultural hydraulic pressure sprayers used for protection and/or fertilization of crops.</p>

81526,IS,,ISO 5684:2023,Adhesives — Floor covering adhesives and products for flooring installation — Assessment and classification of low volatile organic compound (VOC) products,Titre manque,2023-04-14,1,['83.180'],ISO/TC 61/SC 11,9599,,[88053],['en'],7,"<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt; mso-fareast-font-family: 'MS Mincho'; mso-fareast-theme-font: minor-fareast;'>This document specifies a reference method for the determination of volatile organic compound (VOC) emissions into indoor air from floor covering adhesives and products used for flooring installation. This method is applicable to

11799,IS,,ISO 5687:1981,Equipment for harvesting — Combine harvester — Determination and designation of grain tank capacity and unloading device performance,Matériel de récolte — Moissonneuses-batteuses — Détermination et désignation de la capacité et des performances du dispositif de déchargement des trémies,1981-04-01,1,['65.060.50'],ISO/TC 23/SC 7,9599,,[11800],"['en','fr']",1,

11800,IS,,ISO 5687:1999,Equipment for harvesting — Combine harvesters — Determination and designation of grain tank capacity and unloading device performance,Matériel de récolte — Moissonneuses-batteuses — Détermination et désignation de la capacité et des performances du dispositif de déchargement des trémies à grain,1999-09-30,2,['65.060.50'],ISO/TC 23/SC 7,9599,[11799],[71315],['en'],2,

4660,IS,,ISO 569:1982,Textile machinery and accessories — Heald frames — Co-ordinated dimensions in relation to the pitch of the harness,Matériel pour l'industrie textile — Cadres de lisses — Coordination des dimensions en fonction de la division du harnais,1982-12-01,1,['59.120.30'],ISO/TC 72/SC 3,9599,,"[1204,1582]","['en','fr']",2,

11801,IS,,ISO 5690-1:1982,Equipment for distributing fertilizers — Test methods — Part 1: Full width fertilizer distributors,Matériels de distribution des fertilisants — Méthodes d'essai — Partie 1: Distributeurs d'engrais en nappe,1982-12-01,1,['65.060.25'],ISO/TC 23,9599,,[11802],"['en','fr']",14,

11805,IS,,ISO 5692:1979,Agricultural vehicles — Mechanical connections on towed vehicles — Hitch-rings — Specifications,Véhicules agricoles — Liaisons mécaniques entre véhicules — Anneaux d'attelage — Spécifications,1979-02-01,1,['65.060.10'],ISO/TC 23/SC 4,9599,,"[33462,21075,35383]","['en','fr']",3,<p>Specifies the requirements for the attachment of towed vehicles by means of ring type hitches. Applies to trailers and to implements attached to the rear of the towing vehicle. Includes operating conditions and interchangeability dimensions. Two figures show details.</p>

11811,IS,,ISO 5700:1984,Agricultural and forestry wheeled tractors — Protective structures — Static test method and acceptance conditions,Tracteurs agricoles et forestiers à roues — Structures de protection — Méthode d'essais statiques et conditions d'acceptation,1984-07-01,2,"['65.060.80','65.060.10']",ISO/TC 23/SC 3,9599,,[11812],"['en','fr']",17,

11812,IS,,ISO 5700:1989,Wheeled tractors for agriculture and forestry — Protective structures — Static test method and acceptance conditions,Tracteurs agricoles et forestiers à roues — Structures de protection — Méthode d'essais statiques et conditions d'acceptation,1989-12-14,3,"['65.060.80','65.060.10']",ISO/TC 23/SC 3,9599,[11811],[37974],"['en','fr']",17,"<p>This third edition cancels and replaces the second edition (1984) . Specifies a static loading test method and applies to tractors having at least two axles for pneumatic-tyred wheels, with or without track attachments, and with a tractor mass not less than 800 kg and not more than 15 000 kg. Annex A contains requirements for providi

26860,IS,Amd,ISO 5700:1989/Amd 1:1998,Wheeled tractors for agriculture and forestry — Protective structures — Static test method and acceptance conditions — Amendment 1,Tracteurs agricoles et forestiers à roues — Structures de protection — Méthode d'essais statiques et conditions d'acceptation — Amendement 1,1998-12-03,3,['65.060.10'],ISO/TC 23/SC 3,9599,,[37974],"['en','fr']",1,

37974,IS,,ISO 5700:2006,Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Static test method and acceptance conditions,Tracteurs agricoles et forestiers — Structures de protection contre le retournement (ROPS) — Méthode d'essai statique et conditions d'acceptation,2006-11-08,4,"['65.060.80','65.060.10']",ISO/TC 23/SC 2,9599,"[37536,26860,11812]",[52218],"['en','fr']",27,"<p>ISO 5700:2006 specifies a static test method and the acceptance conditions for roll-over protective structures (cab or frame) of wheeled tractors for agriculture and forestry.</p><p>It is applicable to tractors having at least two axles for wheels mounted with pneumatic tyres, or having trac

52218,IS,,ISO 5700:2013,Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions,Tracteurs agricoles et forestiers — Structures de protection contre le retournement — Méthode d'essai statique et conditions d'acceptation,2013-05-06,5,"['65.060.80','65.060.10']",ISO/TC 23/SC 2,9599,[37974],[85676],['en'],39,"<p>ISO 5700:2013 specifies a static test method and the acceptance conditions for roll-over protective structures (cab or frame) of wheeled or tracked tractors for agriculture and forestry.</p><p>It is applicable to tractors having at least two axles for wheels mounted with pneumatic tyres, or having tracks instead of wheels, wi

11817,IS,,ISO 5707:1983,Milking machine installations — Construction and performance,Installations de traite mécanique — Construction et performance,1983-02-01,1,['65.040.10'],ISO/TC 23,9599,,[11818],"['en','fr']",14,

11818,IS,,ISO 5707:1996,Milking machine installations — Construction and performance,Installations de traite mécanique — Construction et performances,1996-07-04,2,['65.040.10'],ISO/TC 23,9599,[11817],[37190],"['en','fr']",39,

28051,IS,Cor,ISO 5707:1996/Cor 1:1997,Milking machine installations — Construction and performance — Technical Corrigendum 1,Installations de traite mécanique — Construction et performances — Rectificatif technique 1,1997-02-13,2,['65.040.10'],ISO/TC 23,9599,,[37190],"['en','fr']",2,<p>Replaces the second paragraph in clause 1 and relates to amendments in annex C.</p>

11820,IS,,ISO 5709:1981,Equipment for internal farm work and husbandry — Metal grids for cattle stalls,Matériel d'intérieur de ferme et d'élevage — Grilles métalliques pour étables à bovins,1981-05-01,1,['65.040.10'],ISO/TC 23,9599,,[23264],"['en','fr']",2,

4662,IS,,ISO 571:1976,Textile machinery and accessories — Metal reeds with double-spring baulk — Dimensions,Matériel pour l'industrie textile — Peignes métalliques à ligature double — Dimensions,1976-10-01,1,['59.120.30'],ISO/TC 72,9599,,[4338],"['en','fr']",2,

11827,IS,,ISO 5718-1:1989,Harvesting equipment — Flat blades for rotary mowers — Specifications — Part 1: Type A flat blades,Matériel de récolte — Lames plates pour faucheuses rotatives — Spécifications — Partie 1: Lames plates du type A,1989-06-15,1,['65.060.50'],ISO/TC 23/SC 7,9599,,[33532],"['en','fr']",2,<p>Specifies main dimensions and material characteristics of such blades. These blades are sxposed to considerable centrifugal forces and impacts with foreign objects. A simple bend test to check the brittleness of the material is therefore included.</p>

11828,IS,,ISO 5718-2:1991,Harvesting equipment — Flat blades for rotary mowers — Part 2: Specifications for type B flat blades,Matériel de récolte — Lames plates pour faucheuses rotatives — Partie 2: Spécifications pour lames plates du type B,1991-06-13,1,['65.060.50'],ISO/TC 23/SC 7,9599,,[33532],"['en','fr']",2,

33532,IS,,ISO 5718:2002,Harvesting equipment — Blades for agricultural rotary mowers — Requirements,Matériel de récolte — Lames pour faucheuses rotatives agricoles — Prescriptions,2002-08-15,1,['65.060.50'],ISO/TC 23/SC 7,9599,"[11827,11828]",[56182],"['en','fr']",4,"<p>ISO 5718 specifies the material characteristics of, and marking requirements for, blades on agricultural rotary mowers used for harvesting. In addition, because the blades on agricultural rotary mowers are exposed to considerable centrifugal forces and impact with foreign objects, it includes a simple bend test for checking the brittleness of the material. It does not specify dimensions.</p>"

56182,IS,,ISO 5718:2013,Harvesting equipment — Blades for agricultural rotary mowers — Requirements,Matériel de récolte — Lames pour faucheuses rotatives agricoles — Prescriptions,2013-12-10,2,['65.060.50'],ISO/TC 23/SC 7,9599,[33532],"[79824,79823]","['en','fr']",8,"<p>ISO 5718:2013 specifies requirements for blades used on rotary disk mowers and rotary drum mowers, mounted, semi-mounted, trailed, or self-propelled, as used for forage crop harvesting in agriculture only. It specifies requirements for testing and marking of such blades. A bend test and impact test for checking the brittleness and toughness of the material is also included. It does not specify dimensional requirements.</p>" 5

71035,IS,Amd,ISO 5718:2013/Amd 1:2019,Harvesting equipment — Blades for agricultural rotary mowers — Requirements — Amendment 1,Matériel de récolte — Lames pour faucheuses rotatives agricoles — Prescriptions — Amendement 1,2019-08-21,2,['65.060.50'],ISO/TC 23/SC 7,9599,,"[79824,79823]","['en','fr']",4,