Withdrawn and superseded ISO standards — page 123 of 246

10607,IS,,ISO 4646:1978,Rubber or plastics coated fabrics — Low temperature impact test,Support textile revêtu de caoutchouc ou de plastique — Essai de choc à basse température,1978-07-01,1,['59.080.40'],ISO/TC 45,9599,,[10608],"['en','fr']",5,

10608,IS,,ISO 4646:1989,Rubber- or plastics-coated fabrics — Low-temperature impact test,Supports textiles revêtus de caoutchouc ou de plastique — Essai de choc à basse température,1989-06-22,2,['59.080.40'],ISO/TC 45/SC 4,9599,[10607],[80476],"['en','fr']",6,<p>Determines the lowest temperature at which the fabrics mentioned will not exhibit fractures or coating cracks when subjected to specific impact conditions. An annex deals with the speed calibration of a solenoid-actuated low temperature impact tester.</p>

10609,IS,,ISO 4647:1982,"Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test",Caoutchouc vulcanisé — Détermination de l'adhérence statique au câblé textile — Essai d'arrachement en H,1982-07-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[50753],"['en','fr']",8,"<p>Specifies principle, materials, apparatus, test piece, time-interval between vulcanization and testing, conditioning of the test piece, test temperature and procedure of the subject mentioned. An annex refers to the preparation of silicone-rubber-faced bars and contains several figures.</p>"

50753,IS,,ISO 4647:2010,"Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test",Caoutchouc vulcanisé — Détermination de l'adhérence statique au câblé textile — Essai d'arrachement en H,2010-09-16,2,['83.060'],ISO/TC 45/SC 2,9599,[10609],[82444],"['en','fr','ru']",14,"<p>ISO 4647:2010 specifies a method for the determination of the static adhesion of textile cord to vulcanized rubber using the H‑pull test. It is applicable to cords made from natural or man-made fibres.</p><p>The property levels obtained with this method are affected considerably by the history of the cord and the rubber compound. The method yields data, however, on which a judgement as to the ser

10610,IS,,ISO 4648:1978,"Rubber, vulcanized — Determination of dimensions of test pieces and products for test purposes",Caoutchouc vulcanisé — Détermination des dimensions des éprouvettes et des produits en vue des essais,1978-06-01,1,['83.060'],ISO/TC 45,9599,,[10611],"['en','fr']",3,

10612,IS,Amd,ISO 4648:1978/Amd 1:1981,"Rubber, vulcanized — Determination of dimensions of test pieces and products for test purposes — Amendment 1",Caoutchouc vulcanisé — Détermination des dimensions des éprouvettes et des produits en vue des essais — Amendement 1,1981-03-01,1,['83.060'],ISO/TC 45,9599,,[10611],['en'],1,

10611,IS,,ISO 4648:1991,"Rubber, vulcanized or thermoplastic — Determination of dimensions of test pieces and products for test purposes",Caoutchouc vulcanisé ou thermoplastique — Détermination des dimensions des éprouvettes et des produits en vue des essais,1991-03-06,2,['83.060'],ISO/TC 45/SC 2,9599,"[10612,10610]","[39414,36888]","['en','fr']",2,"<p>For the accurate determination of the various properties of rubber it is essential that the dimensions of the test pieces or products used be measured under well specified conditions. This second edition cancels and replaces the first edition (ISO 4648:1978), the scope of which has been extended to include thermoplastic rubbers. Specifies four

10613,IS,,ISO 4649:1985,Rubber — Determination of abrasion resistance using a rotating cylindrical drum device,Caoutchouc — Détermination de la résistance à l'abrasion à l'aide d'un dispositif à tambour tournant,1985-04-11,1,['83.060'],ISO/TC 45/SC 2,9599,,"[27005,10614]","['en','fr']",9,<p>Specifies a method for the determination of the resistance of rubber to abrasion. No close relation between the results of this abrasion test and service performance can be inferred. Includes terms and definitions.</p>

27005,IS,,ISO 4649:2002,"Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance à l'abrasion à l'aide d'un dispositif à tambour tournant,2002-05-09,2,['83.060'],ISO/TC 45/SC 2,9599,[10613],[50754],"['en','fr']",16,"<p>This International Standard specifies two methods for the determination of the resistance of rubber to abrasion by means of a rotating cylindrical drum device.</p><p>The methods involve determination of the volume loss due to the abrasive action of rubbing a test piece over a specified grade of abrasive sheet. Method A is for a non-rotating test

50754,IS,,ISO 4649:2010,"Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance à l'abrasion à l'aide d'un dispositif à tambour tournant,2010-09-03,3,['83.060'],ISO/TC 45/SC 2,9599,[27005],[70325],"['en','fr','ru']",19,"<p>ISO 4649:2010 specifies two methods for the determination of the resistance of rubber to abrasion by means of a rotating cylindrical drum device.</p><p>The methods involve determination of the volume loss due to the abrasive action of rubbing a test piece over a specified grade of abrasive sheet. Method A is for a non-rotating test piece an

70325,IS,,ISO 4649:2017,"Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance à l'abrasion à l'aide d'un dispositif à tambour tournant,2017-09-14,4,['83.060'],ISO/TC 45/SC 2,9599,[50754],[86603],"['en','fr']",21,"<p>ISO 4649:2017 specifies two methods for the determination of the resistance of rubber to abrasion by means of a rotating cylindrical drum device.</p><p>The methods involve determination of the volume loss due to the abrasive action of rubbing a test piece over a specified grade of abrasive sheet. Method A is for a non-rotating test piece and met

10615,IS,,ISO 4650:1984,Rubber — Identification — Infra-red spectrometric method,Caoutchouc — Identification — Méthode spectrométrique dans l'infrarouge,1984-05-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[36905],"['en','fr']",45,"<p>Describes the method applicable to rubbers in raw state and, if compounded, in both the cured and uncured states. These various types of rubbere are described in the standard. Principle, reagents, apparatus, procedure for the pyrolysates, procedure for films cast from solution and the interpretation of the spectra are given. A detailed annex contains tables of diagnostic absorptions and reference spectra.</p>"

36905,IS,,ISO 4650:2005,Rubber — Identification — Infrared spectrometric method,Caoutchouc — Identification — Méthode spectrométrique dans l'infrarouge,2005-09-12,2,['83.060'],ISO/TC 45/SC 2,9599,[10615],[53026],['en'],40,"<p>ISO 4650:2005 specifies a method for the identification of rubbers, including thermoplastic elastomers, either in the raw state or in the form of vulcanized or unvulcanized mixes. The method is based on infrared spectrometric examination using the transmission technique.</p><p>The method comprises examination of polymers by their pyrolysis products (pyrolysates), or by films cast from solution or obtained by moulding (for raw rubbers only).</p><p>Typical spectra are giv

53026,IS,,ISO 4650:2012,Rubber — Identification — Infrared spectrometric methods,Caoutchouc — Identification — Méthodes spectrométriques dans l'infrarouge,2012-12-06,3,['83.060'],ISO/TC 45/SC 2,9599,[36905],[88777],"['en','fr']",88,"<p>ISO 4650:2012 specifies two methods for the identification of rubbers, including thermoplastic elastomers, either in the raw state or in the form of vulcanized or unvulcanized mixes. The first method is based on infrared spectrometric examination using the transmission technique. The second method makes use of analysis by reflectance.</p><p>A comparison of the spectra resulting from reflectance (attenuated total reflectance, ATR) and transmission (film) is giv

10616,IS,,ISO 4651:1979,Cellular rubbers and plastics — Determination of dynamic cushioning performance,Caoutchoucs et plastiques alvéolaires — Détermination de la capacité d'amortissement dynamique,1979-12-01,1,['83.100'],ISO/TC 45,9599,,[10617],"['en','fr']",10,

10619,IS,,ISO 4652-1:1994,Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Part 1: Single-point procedures,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la surface spécifique par méthodes par adsorption d'azote — Partie 1: Modes opératoires à un point de mesure,1994-12-22,1,['83.040.20'],ISO/TC 45/SC 3,9599,[10618],[55612],"['en','fr']",21,"<p>Specifies four methods for the determination of the specific surface area of types and grades of carbon black for use in the rubber industry: method A using the Ni-Count-1 apparatus, method B using the Areameter apparatus, method C using gas chromatograph

10618,IS,,ISO 4652:1981,Rubber compounding ingredients — Carbon black — Determination of specific surface area — Nitrogen adsorption methods,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la surface spécifique — Méthodes par adsorption d'azote,1981-12-01,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[10619],"['en','fr']",15,

55612,IS,,ISO 4652:2012,Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la surface spécifique par méthodes par adsorption d'azote — Modes opératoires à un point de mesure,2012-06-13,2,['83.040.20'],ISO/TC 45/SC 3,9599,[10619],[75103],"['en','ru']",28,"<p>This International Standard specifies four methods for the determination of the specific surface area of types</p><p>and grades of carbon black for use in the rubber industry:</p><p>— method A using the Ni‑Count‑1 apparatus (Clause 3);</p><p>— method B using the Areameter ap

10620,IS,,ISO 4655:1977,Rubber — Reinforced styrene-butadiene latex — Determination of total bound styrene content,Caoutchouc — Latex de styrène-butadiène renforcé — Détermination de la teneur totale en styrène lié,1977-07-01,1,['83.040.10'],ISO/TC 45,9599,,[10621],"['en','fr']",10,

10623,IS,,ISO 4656-1:1978,Carbon black for use in the rubber industry — Determination of dibutylphthalate absorption number — Part 1: Method using absorptiometer,Noir de carbone pour l'industrie du caoutchouc — Détermination de l'indice d'absorption de phtalate de dibutyle — Partie 1: Méthode à l'absorptiomètre,1978-07-01,1,['83.040.20'],ISO/TC 45,9599,,"[10624,10625]","['en','fr']",7,

10624,IS,,ISO 4656-1:1985,Rubber compounding ingredients — Carbon black — Determination of dibutyl phthalate absorption number — Part 1: Method using absorptometer,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de l'indice d'absorption de phtalate de dibutyle — Partie 1: Méthode à l'absorptiomètre,1985-08-08,2,['83.040.20'],ISO/TC 45/SC 3,9599,[10623],[10625],"['en','fr']",7,

10625,IS,,ISO 4656-1:1992,Rubber compounding ingredients — Carbon black — Determination of dibutyl phthalate absorption number — Part 1: Method using absorptometer,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de l'indice d'absorption de phtalate de dibutyle — Partie 1: Méthode à l'absorptiomètre,1992-12-17,3,['83.040.20'],ISO/TC 45/SC 3,9599,"[10623,10624]",[41303],"['en','fr']",8,"<p>Specifies principle, reagent, apparatus, sample preparation, conditions of the test, procedure and the expression of the results. An annex is given for checking and adjusting the torque spring and hydraulic damping, another for checking the constant-rate burette.</p>"

10626,IS,,ISO 4656-2:1981,Rubber compounding ingredients — Carbon black — Determination of dibutylphthalate absorption number — Part 2: Method using plastograph or plasticorder,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de l'indice d'absorption de phtalate de dibutyle — Partie 2: Méthode au plastographe ou au plasticorder,1981-09-01,1,['83.040.20'],ISO/TC 45,9599,,[10627],"['en','fr']",5,

10627,IS,,ISO 4656-2:1991,Rubber compounding ingredients — Carbon black — Determination of dibutyl phthalate absorption number — Part 2: Method using plastograph or plasticorder,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de l'indice d'absorption de phtalate de dibutyle — Partie 2: Méthode au plastographe ou au plasticorder,1991-12-12,2,['83.040.20'],ISO/TC 45/SC 3,9599,[10626],[41303],"['en','fr']",5,

41303,IS,,ISO 4656:2007,Rubber compounding ingredients — Carbon black — Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN),Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de l'indice d'absorption d'huile (OAN) et de l'indice d'absorption d'huile d'échantillons comprimés (COAN),2007-05-09,1,['83.040.20'],ISO/TC 45/SC 3,9599,"[13416,10627,10625]",[61211],"['en','fr']",16,"<p>Oil absorption number (OAN) is a measure of the ability of a carbon black to absorb liquids. This property is a function of the structure of the carbon black. Either dibutyl phthalate (DBP) or paraffin oil is acceptable for use with standard pelleted gr

10628,IS,,ISO 4658:1980,"Rubber, acrylonitrile-butadiene (NBR) — Test recipe and evaluation of vulcanization characteristics",Caoutchouc acrylonitrile-butadiène (NBR) — Formule d'essai et évaluation des caractéristiques de vulcanisation,1980-03-01,1,['83.060'],ISO/TC 45,9599,,[10629],"['en','fr']",2,

10629,IS,,ISO 4658:1990,"Rubber, acrylonitrile-butadiene (NBR) — Evaluation procedure",Caoutchouc acrylonitrile-butadiène (NBR) — Méthode d'évaluation,1990-12-06,2,['83.060'],ISO/TC 45/SC 3,9599,[10628],[27917],"['en','fr']",4,

27917,IS,,ISO 4658:1999,Acrylonitrile-butadiene rubber (NBR) — Evaluation procedure,Caoutchouc acrylonitrile-butadiène (NBR) — Méthode d'évaluation,1999-12-02,3,['83.060'],ISO/TC 45/SC 3,9599,[10629],"[77458,55618]","['en','fr']",9,"<p>This International Standard specifies, for acrylonitrile-butadiene rubbers (NBRs):</p><p>_ physical and chemical tests on raw rubbers;</p><p>_ standard materials, a standard test formulation, equipment and processing methods for evaluating the</p><p>vulcanization characteristics.</p>"

35839,IS,Amd,ISO 4658:1999/Amd 1:2004,Acrylonitrile-butadiene rubber (NBR) — Evaluation procedure — Amendment 1,Caoutchouc acrylonitrile-butadiène (NBR) — Méthode d'évaluation — Amendement 1,2004-10-21,3,['83.060'],ISO/TC 45/SC 3,9599,,"[77458,55618]","['en','fr']",4,

10630,IS,,ISO 4659:1981,"Rubber, raw styrene-butadiene (carbon black or carbon black and oil masterbatches) — Test recipe and method of evaluation",Caoutchouc butadiène-styrène brut (mélanges-maîtres avec du noir de carbone ou avec du noir de carbone et de l'huile) — Formule d'essai et méthode d'évaluation,1981-11-01,2,['83.060'],ISO/TC 45,9599,,[10631],"['en','fr']",2,

10631,IS,,ISO 4659:1989,"Rubber, styrene-butadiene (carbon black or carbon black and oil masterbatches) — Evaluation procedure",Caoutchouc butadiène-styrène (mélanges-maîtres avec du noir de carbone ou avec du noir de carbone et de l'huile) — Méthode d'évaluation,1989-09-28,3,['83.060'],ISO/TC 45/SC 3,9599,[10630],[25532],"['en','fr']",3,

25532,IS,,ISO 4659:1997,"Rubber, styrene-butadiene (carbon black or carbon black and oil masterbatches) — Evaluation procedure",Caoutchouc butadiène-styrène (mélanges-maîtres avec du noir de carbone ou avec du noir de carbone et de l'huile) — Méthode d'évaluation,1997-12-04,4,['83.060'],ISO/TC 45/SC 3,9599,[10631],[35643],"['en','fr']",5,

35643,IS,,ISO 4659:2003,Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) — Evaluation procedure,Caoutchouc butadiène-styrène (mélanges-maîtres avec du noir de carbone ou avec du noir de carbone et de l'huile) — Méthode d'évaluation,2003-01-09,5,['83.060'],ISO/TC 45/SC 3,9599,[25532],[65597],"['en','fr']",8,"<p>ISO 4659:2003 specifies</p><ul><li>physical and chemical tests on raw rubbers;</li><li>standard materials, standard test formulations, equipment and processing methods for evaluating the vulcanization characteristics of styrene-butadiene rubber masterbatches with carbon black or with carbon black and oil.</li></ul>"

65597,IS,,ISO 4659:2014,Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) — Evaluation procedure,Caoutchouc butadiène-styrène (mélanges-maîtres avec du noir de carbone ou avec du noir de carbone et de l'huile) — Méthode d'évaluation,2014-09-22,6,['83.060'],ISO/TC 45/SC 3,9599,[35643],[80033],"['en','fr','ru']",9,"<p>ISO 4659:2014 specifies physical and chemical tests on raw rubbers; standard materials, standard test formulations, equipment, and processing methods for evaluating the vulcanization characteristics of styrene-butadiene rubber masterbatches with carbon black or with carbon black and oil.</p>"

10632,IS,,ISO 4660:1977,"Rubber, raw natural — Colour index test",Caoutchouc naturel brut — Essai d'indice de couleur,1977-07-01,1,['83.040.10'],ISO/TC 45,9599,,[10633],"['en','fr']",4,

10633,IS,,ISO 4660:1991,"Rubber, raw natural — Colour index test",Caoutchouc naturel brut — Essai d'indice de couleur,1991-01-17,2,['83.040.10'],ISO/TC 45/SC 3,9599,[10632],[29104],"['en','fr']",4,

29104,IS,,ISO 4660:1999,"Rubber, raw natural — Colour index test",Caoutchouc naturel brut — Essai d'indice de couleur,1999-11-18,3,['83.040.10'],ISO/TC 45/SC 3,9599,[10633],[57377],"['en','fr']",6,

57377,IS,,ISO 4660:2011,"Rubber, raw natural — Colour index test",Caoutchouc naturel brut — Essai d'indice de couleur,2011-02-04,4,['83.040.10'],ISO/TC 45/SC 3,9599,"[55615,29104]",[72853],"['en','fr','ru']",6,<p>ISO 4660:2011 specifies a method of determining the colour of raw natural rubber according to a standard colour scale.</p>

10635,IS,,ISO 4661-1:1986,"Rubber, vulcanized — Preparation of samples and test pieces — Part 1: Physical tests",Caoutchouc vulcanisé — Préparation des échantillons et éprouvettes — Partie 1: Essais physiques,1986-07-03,1,['83.060'],ISO/TC 45/SC 2,9599,[10634],[20168],"['en','fr']",4,

20168,IS,,ISO 4661-1:1993,"Rubber, vulcanized or thermoplastic — Preparation of samples and test pieces — Part 1: Physical tests",Caoutchouc vulcanisé ou thermoplastique — Préparation des échantillons et éprouvettes — Partie 1: Essais physiques,1993-09-23,2,['83.060'],ISO/TC 45/SC 2,9599,[10635],[36888],"['en','fr']",4,"<p>Includes a number of factors important in the preparation of test pieces. Procedure for adjusting the thickness, if necessary, is described. No other possibility available, test pieces may be prepared from specially moulded sheets. It is important that both product and sheet are made from the same batch of material and have equivalent cure.</p>"

10634,IS,,ISO 4661:1977,Rubber — Preparation of test pieces,Caoutchouc — Préparation des éprouvettes,1977-12-01,1,['83.060'],ISO/TC 45/SC 2,9599,,"[10636,10635]","['en','fr']",4,

10636,IS,,ISO 4661-2:1987,"Rubber, vulcanized — Preparation of samples and test pieces — Part 2: Chemical tests",Caoutchouc vulcanisé — Préparation des échantillons et éprouvettes — Partie 2: Essais chimiques,1987-02-05,1,['83.060'],ISO/TC 45/SC 2,9599,[10634],[74945],"['en','fr']",2,"<p>Care should be taken that any test portion is representative of the sample with respect to the property or constituent to be determined. In case of compositions of the original mix any surface bloom should be incorporated, but for final bulk bloom should be removed. If test pieces are taken from manufacturer's products, vulcanized rubber has to be separated from other possible components which should be done

10637,IS,,ISO 4662:1978,Rubber — Determination of rebound resilience of vulcanizates,Caoutchouc — Détermination de la résilience de rebondissement des vulcanisats,1978-02-01,1,['83.060'],ISO/TC 45,9599,,[10638],"['en','fr']",10,

10638,IS,,ISO 4662:1986,Rubber — Determination of rebound resilience of vulcanizates,Caoutchouc — Détermination de la résilience de rebondissement des vulcanisats,1986-08-14,2,['83.060'],ISO/TC 45/SC 2,9599,"[6400,10637]",[45392],"['en','fr']",11,"<p>Describes a method for a narrow range of impact strain and strain rate, by means of any form of impacting and measuring apparatus conforming to the requirements described in the standard. Method is applicable to vulcanized rubbers, the hardness of which, at the test temperature, lies betwen 30 and 85 IRHD. Annes A refers to non-standard test pieces and contains a table for recommended fundamental parameters. -Constitutes a minor revision of the

45392,IS,,ISO 4662:2009,"Rubber, vulcanized or thermoplastic — Determination of rebound resilience",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résilience de rebondissement,2009-08-11,3,['83.060'],ISO/TC 45/SC 2,9599,[10638],[68111],"['en','fr','ru']",30,"<p>ISO 4662:2009 specifies two methods for determining the rebound resilience of rubber the hardness of which lies between 30 IRHD and 85 IRHD. They are the pendulum method and the tripsometer method.</p><p>With the pendulum method, a mass with a spherical end impacts a flat test piece, firmly held but free to bulge. The kinetic energy of the impacting mass is measured immediately before and after impact.</p><p>With the t

56136,IS,Cor,ISO 4662:2009/Cor 1:2010,"Rubber, vulcanized or thermoplastic — Determination of rebound resilience — Technical Corrigendum 1",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résilience de rebondissement — Rectificatif technique 1,2010-03-12,3,['83.060'],ISO/TC 45/SC 2,9599,,[68111],"['en','fr','ru']",1,

10639,IS,,ISO 4663:1984,Rubber — Determination of dynamic behaviour of vulcanizates at low frequencies — Torsion pendulum method,Caoutchouc — Détermination du comportement dynamique des vulcanisats à basses fréquences — Méthode du pendule de torsion,1984-02-01,2,['83.060'],ISO/TC 45,9599,,[10640],"['en','fr']",8,

10640,IS,,ISO 4663:1986,Rubber — Determination of dynamic behaviour of vulcanizates at low frequencies — Torsion pendulum method,Caoutchouc — Détermination du comportement dynamique des vulcanisats à basses fréquences — Méthode du pendule de torsion,1986-08-14,3,['83.060'],ISO/TC 45/SC 2,9599,[10639],[41463],"['en','fr']",9,<p>Determines the shear modulus and the mechanical damping over a wide temperature range at low frequencies and comparatively low strain in shear. Test is primarily intended for the determination of the temperature at which the test piece shows transitions in the visco-elastic properties. Not particular accurate for the determination of absolute values of modulus. Three m

41954,IS,,ISO 4664-1:2005,"Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance",Caoutchouc vulcanisé ou thermoplastique — Détermination des propriétés dynamiques — Partie 1: Lignes directrices,2005-03-01,1,['83.060'],ISO/TC 45/SC 2,9599,[21878],[53027],"['en','fr']",24,<p>ISO 4664-1:2005 provides guidance on the determination of dynamic properties of vulcanized and thermoplastic rubbers. It includes both free- and forced-vibration methods carried out on both materials and products. It does not cover rebound resilience or cyclic tests in which the main objective is to fatigue the rubber.</p>

53027,IS,,ISO 4664-1:2011,"Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance",Caoutchouc vulcanisé ou thermoplastique — Détermination des propriétés dynamiques — Partie 1: Lignes directrices,2011-11-09,2,['83.060'],ISO/TC 45/SC 2,9599,[41954],[80465],"['en','fr']",25,<p>ISO 4664-1:2011 provides guidance on the determination of dynamic properties of vulcanized and thermoplastic rubbers. It includes both free- and forced-vibration methods carried out on both materials and products. It does not cover rebound resilience or cyclic tests in which the main objective is to fatigue the rubber.</p>

10641,IS,,ISO 4664:1978,Rubber — Determination of dynamic properties of vulcanizates for classification purposes (by forced sinusoidal shear strain),Caoutchouc — Détermination des propriétés dynamiques des caoutchoucs vulcanisés aux fins de classification (par application d'une force sinusoïdale de cisaillement),1978-02-01,1,['83.060'],ISO/TC 45,9599,,[10642],"['en','fr']",4,

10642,IS,,ISO 4664:1987,Rubber — Determination of dynamic properties of vulcanizates for classification purposes (by forced sinusoidal shear strain),Caoutchouc — Détermination des propriétés dynamiques des caoutchoucs vulcanisés aux fins de classification (par application d'une force sinusoïdale de cisaillement),1987-04-09,2,['83.060'],ISO/TC 45/SC 2,9599,[10641],[21878],['en'],4,

21878,IS,,ISO 4664:1998,Rubber — Guide to the determination of dynamic properties,Caoutchouc — Lignes directrices pour la détermination des propriétés dynamiques,1998-04-30,3,['83.060'],ISO/TC 45/SC 2,9599,"[7856,10642]",[41954],['en'],16,

10643,IS,,ISO 4665-1:1985,"Rubber, vulcanized — Resistance to weathering — Part 1: Assessment of changes in properties after exposure to natural weathering or artificial light",Caoutchouc vulcanisé — Résistance aux intempéries — Partie 1: Évaluation des variations des propriétés après exposition aux agents atmosphériques ou à la lumière artificielle,1985-09-26,1,['83.060'],ISO/TC 45/SC 2,9599,,[10644],"['en','fr']",5,

10644,IS,,ISO 4665:1998,"Rubber, vulcanized and thermoplastic — Resistance to weathering",Caoutchouc vulcanisé ou thermoplastique — Résistance aux intempéries,1998-07-09,1,['83.060'],ISO/TC 45/SC 2,9599,"[10647,10645,10643]",[41461],['en'],7,

10645,IS,,ISO 4665-2:1985,"Rubber, vulcanized — Resistance to weathering — Part 2: Methods of exposure to natural weathering",Caoutchouc vulcanisé — Résistance aux intempéries — Partie 2: Méthodes d'exposition aux agents atmosphériques,1985-09-26,1,['83.060'],ISO/TC 45/SC 2,9599,,[10644],"['en','fr']",8,

41461,IS,,ISO 4665:2006,"Rubber, vulcanized or thermoplastic — Resistance to weathering",Caoutchouc vulcanisé ou thermoplastique — Résistance aux intempéries,2006-09-29,2,['83.060'],ISO/TC 45/SC 2,9599,[10644],[68112],"['en','fr']",12,"<p>ISO 4665:2006 specifies methods for the exposure of vulcanized or thermoplastic rubbers to natural or artificial weathering and methods for the determination of changes in colour, appearance and physical properties resulting from exposure.</p>"

10647,IS,,ISO 4665-3:1987,"Rubber, vulcanized — Resistance to weathering — Part 3: Methods of exposure to artificial light",Caoutchouc vulcanisé — Résistance aux intempéries — Partie 3: Méthodes d'exposition à la lumière artificielle,1987-06-18,1,['83.060'],ISO/TC 45/SC 2,9599,,[10644],"['en','fr']",13,

10648,IS,,ISO 4666-1:1982,"Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles",Caoutchouc vulcanisé — Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres — Partie 1: Principes fondamentaux,1982-07-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[50755],"['en','fr']",6,"<p>Gives directions for carrying out measurements which make possible predictions regarding the durability of rubbers in finished articles, e.g. tyres, bearings, V-belts etc. Due to the wide variations in service conditions, no simple correlation between accelerated tests and service performance can be a

10649,IS,,ISO 4666-2:1982,"Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 2: Rotary flexometer",Caoutchouc vulcanisé — Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres — Partie 2: Flexomètre à rotation,1982-07-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[50748],"['en','fr']",7,"<p>Cylindrical test piece is compressed axially to a predetermined stress or strain between two chucks mounted on shafts. By displacing the shafts the eccentricity produces a flexing of the rotating test piece which entails rise in temperature. This rise is measured in the centre. The fatigue life is als

10650,IS,,ISO 4666-3:1982,"Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer",Caoutchouc vulcanisé — Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres — Partie 3: Flexomètre à compression,1982-11-01,1,['83.060'],ISO/TC 45/SC 2,9599,,"[50217,23840]","['en','fr']",7,"<p>Device specified is known as Goodrich flexometer, but any other apparatus giving equivalent performance may be used. Predictions regarding the durability of rubbers in finished articles are possible by means of test results for the properties mentioned. Method not recommended for rubbe

50217,IS,,ISO 4666-3:2010,"Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)",Caoutchouc vulcanisé — Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres — Partie 3: Flexomètre à compression (type à déformation constante),2010-09-29,2,['83.060'],ISO/TC 45/SC 2,9599,[10650],[70329],"['en','fr']",15,"<p>ISO 4666-3:2010 specifies the flexometer test with constant-strain amplitude for the determination of the temperature rise and resistance to fatigue of vulcanized rubber. The flexometer specified is known as the Goodrich flexometer,

70329,IS,,ISO 4666-3:2016,"Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)",Caoutchouc vulcanisé — Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres — Partie 3: Flexomètre à compression (type à déformation constante),2016-11-07,3,['83.060'],ISO/TC 45/SC 2,9599,[50217],[84137],"['en','fr']",17,"<p>ISO 4666-3:2016 specifies the flexometer test with constant-strain amplitude for the determination of the temperature rise and resistance to fatigue of vulcanized rubber. The flexometer specified is known as the Goodrich flexometer,

41348,IS,,ISO 4666-4:2007,"Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 4: Constant-stress flexometer",Caoutchouc vulcanisé — Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres — Partie 4: Flexomètre à contrainte constante,2007-07-24,1,['83.060'],ISO/TC 45/SC 2,9599,,"[72789,57739]","['en','fr']",19,"<p>ISO 4666-4:2007 specifies a constant-stress flexometer test for the determination of the temperature rise and resistance to fatigue of vulcanized rubbers.</p><p>Many rubber products, such as tyres and belts, are tested by subjecting them to an oscillating load with a cons

10652,IS,,ISO 4671:1984,Rubber and plastics hose and hose assemblies — Methods of measurement of dimensions,Tuyaux et flexibles en caoutchouc et en plastique — Méthodes de mesurage des dimensions,1984-12-01,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[25524],"['en','fr']",5,

25524,IS,,ISO 4671:1999,Rubber and plastics hoses and hose assemblies — Methods of measurement of dimensions,Tuyaux et flexibles en caoutchouc et en plastique — Méthodes de mesurage des dimensions,1999-02-04,2,"['83.140.40','23.040.70']",ISO/TC 45/SC 1,9599,[10652],[41600],"['en','fr']",10,

41600,IS,,ISO 4671:2007,Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies,Tuyaux et flexibles en caoutchouc et en plastique — Méthodes de mesurage des dimensions des tuyaux et de la longueur des flexibles,2007-12-11,3,"['83.140.40','23.040.70']",ISO/TC 45/SC 1,9599,[25524],[81749],"['en','fr','ru']",11,"<p>ISO 4671:2007 specifies methods of measuring the inside diameter, outside diameter (including diameter over reinforcement of hydraulic hoses), wall thickness, concentricity and lining and cover thickness of hoses, methods of measurement and identification of the lengths of hoses and hose assemblies, and a me

59233,IS,Amd,ISO 4671:2007/Amd 1:2011,Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies — Amendment 1: Clarification of position at which outside diameter is measured,Tuyaux et flexibles en caoutchouc et en plastique — Méthodes de mesurage des dimensions des tuyaux et de la longueur des flexibles — Amendement 1: Clarification concernant la position à laquelle le diamètre extérieur est mesuré,2011-08-17,3,"['83.140.40','23.040.70']",ISO/TC 45/SC 1,9599,,[81749],"['en','fr']",1,

10653,IS,,ISO 4672:1978,Rubber products — Hoses — Low-temperature flexibility tests,Produits en caoutchouc — Tuyaux — Essais de souplesse à basse température,1978-11-01,1,['23.040.70'],ISO/TC 45,9599,,[10654],"['en','fr']",3,

10654,IS,,ISO 4672:1988,Rubber and plastics hoses — Sub-ambient temperature flexibility tests,Tuyaux en caoutchouc et en plastique — Essais de souplesse à température inférieure à l'ambiante,1988-04-14,2,['23.040.70'],ISO/TC 45/SC 1,9599,[10653],[23835],"['en','fr']",3,

23835,IS,,ISO 4672:1997,Rubber and plastics hoses — Sub-ambient temperature flexibility tests,Tuyaux en caoutchouc et en plastique — Essais de souplesse à température inférieure à l'ambiante,1997-02-27,3,['23.040.70'],ISO/TC 45/SC 1,9599,[10654],[45942],"['en','fr']",6,<p>Specifies two methods for assessing whether a rubber or plastics hose retains adequate flexibility at sub-ambient temperatures. Replaces the second edition.</p>

37849,IS,,ISO 4674-1:2003,Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance au déchirement — Partie 1: Méthodes à vitesse constante de déchirement,2003-09-10,1,['59.080.40'],ISO/TC 45/SC 4,9599,[10655],[65592],"['en','fr']",11,<p>ISO 4674-1:2003 describes two methods for determining the forces necessary to initiate and propagate tearing of a coated fabric using the constant rate of tear method. The methods described are:</p><ol><li>method A: tongue tear;</li><li>method B: trouser tear.</li></ol>

10655,IS,,ISO 4674:1977,Fabrics coated with rubber or plastics — Determination of tear resistance,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance au déchirement,1977-08-01,1,['59.080.40'],ISO/TC 45/SC 4,9599,,"[21827,20147,37849]","['en','fr']",4,"<p>Specifies three methods which are applicable to the fabrics in which the constituents of the backing fabrics perpendicular to the direction of tearing are broken; they are not applicable to fabrics with cellular backing or a meshed cloth backing in which the tear pattern is complex. Methods A1, A2, and B do not give the same results. The test pieces are described by 3 figures.</p>"

21827,IS,,ISO 4674-2:1998,Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance au déchirement — Partie 2: Méthode au mouton-pendule,1998-04-23,1,['59.080.40'],ISO/TC 45/SC 4,9599,[10655],[77551],"['en','fr']",6,

10656,IS,,ISO 4675:1979,Fabrics coated with rubber or plastics — Low temperature bend test,Support textile revêtu de caoutchouc ou de plastique — Essai de flexion à basse température,1979-05-01,1,['59.080.40'],ISO/TC 45,9599,,[10657],"['en','fr']",4,

10657,IS,,ISO 4675:1990,Rubber- or plastics-coated fabrics — Low-temperature bend test,Supports textiles revêtus de caoutchouc ou de plastique — Essai de flexion à basse température,1990-06-28,2,['59.080.40'],ISO/TC 45/SC 4,9599,[10656],[70222],"['en','fr']",5,"<p>Describes a method for the materials given determining the ability to resist the low-temperature effect to bending at special temperatures after definite periods of exposure. Applicable to material which a thickness between 0.10 and 2.20 mm. Since these materials are used in different applications, no general relationship between this test and the service performance can be given or implied. Two figures show the test apparatus.</p>

4496,IS,,ISO 468:1982,"Surface roughness — Parameters, their values and general rules for specifying requirements","Rugosité de surface — Paramètres, leurs valeurs et les règles générales de la détermination des spécifications",1982-08-01,1,['17.040.20'],ISO/TC 213,9599,,[21290],"['en','fr']",3,

10665,IS,,ISO 4686:1980,Iron ores — Determination of silicon content — Reduced molybdosilicate spectrophotometric method,Minerais de fer — Dosage du silicium — Méthode spectrophotométrique au molybdosilicate réduit,1980-02-01,1,['73.060'],ISO/TC 102/SC 2,9599,,[10666],"['en','fr']",6,

10667,IS,,ISO 4687:1984,Iron ores — Determination of phosphorus content — Molybdenum blue spectrophotometric method,Minerais de fer — Dosage du phosphore — Méthode spectrophotométrique au bleu de molybdène,1984-05-01,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[10668],"['en','fr']",8,

10670,IS,,ISO 4688-1:1992,Iron ores — Determination of aluminium content — Part 1: Flame atomic absorption spectrometric method,Minerais de fer — Dosage de l'aluminium — Partie 1: Méthode par spectrométrie d'absorption atomique dans la flamme,1992-12-10,1,['73.060.10'],ISO/TC 102/SC 2,9599,[10669],[39726],"['en','fr']",9,"<p>The method is based on decomposition of the test portion by hydrochloric acid/nitric acid, evaporation, ignition of the residue and removal of silica, fusion with sodium carbonate and dissolution of the cooled melt in the filtrate, aspiration of the solution into the flame of an atomic absorption spectrometer, and comparison of the absorbance values obtained for aluminiu

39726,IS,,ISO 4688-1:2006,Iron ores — Determination of aluminium — Part 1: Flame atomic absorption spectrometric method,Minerais de fer — Dosage de l'aluminium — Partie 1: Méthode par spectrométrie d'absorption atomique dans la flamme,2006-03-22,2,['73.060.10'],ISO/TC 102/SC 2,9599,[10670],[71884],['en'],11,"<p>ISO 4688-1:2006 specifies a flame atomic absorption spectrometric method for the determination of the mass fraction of aluminium in iron ores.</p><p>This method is applicable to mass fractions of aluminium between 0,1 % and 5,0 % in natural iron ores, iron ore concentrates and agglomerates, including sinter products.</p>"

10669,IS,,ISO 4688:1980,Iron ores — Determination of aluminium content — Flame atomic absorption spectrometric method,Minerais de fer — Dosage de l'aluminium — Méthode par spectrométrie d'absorption atomique dans la flamme,1980-02-01,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[10670],"['en','fr']",7,

10671,IS,,ISO 4689:1986,Iron ores — Determination of sulfur content — Barium sulfate gravimetric method,Minerais de fer — Dosage du soufre — Méthode gravimétrique au sulfate de baryum,1986-10-09,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[67679],"['en','fr']",8,"<p>The method is applicable to a concentration range of 0,01 bis 1,0 % (m/m) of sulfur in natural iron ores, and iron ore concentrates and agglomerates including sinter products. Specifies principle, reagents, apparatus, sampling and samples, procedure, expression of results and test report.ISO 4689 includes three annexes.</p>"

35119,IS,,ISO 4689-2:2004,Iron ores — Determination of sulfur content — Part 2: Combustion/titration method,Minerais de fer — Dosage du soufre — Partie 2: Méthode par combustion et titration,2004-03-24,1,['73.060.10'],ISO/TC 102/SC 2,9599,[10672],[67677],['en'],13,"<p>ISO 4689-2:2004 specifies a combustion/titration method for the determination of the sulfur content of iron ores.</p><p>The method is applicable to sulfur contents between 0,002 % (mass fraction) and 0,25 % (mass fraction) in natural iron ores, iron ore concentrates and agglomerates, including sinter products. The results are not affected by the presence of fluoride.</p>"

67677,IS,,ISO 4689-2:2015,Iron ores — Determination of sulfur content — Part 2: Combustion/titration method,Minerais de fer — Dosage du soufre — Partie 2: Méthode par combustion et titration,2015-07-20,2,['73.060.10'],ISO/TC 102/SC 2,9599,[35119],[72130],['en'],13,"<p>ISO 4689-2:2015 specifies a combustion/titration method for the determination of the sulfur content of iron ores.</p><p>This method is applicable to sulfur contents between 0,002 % (mass fraction) and 0,25 % (mass fraction) in natural iron ores, iron ore concentrates, and agglomerates, including sinter products. The results are not affected by the presence of fluoride.</p>"

35118,IS,,ISO 4689-3:2004,Iron ores — Determination of sulfur content — Part 3: Combustion/infrared method,Minerais de fer — Dosage du soufre — Partie 3: Méthode par combustion et infrarouge,2004-03-24,1,['73.060.10'],ISO/TC 102/SC 2,9599,[10672],[67678],['en'],14,"<p>ISO 4689-3:2004 specifies a combustion/infrared method, using a high-frequency induction furnace, for the determination of the sulfur content of iron ores.</p><p>This method is applicable to sulfur contents between 0,002 % (mass fraction) and 0,25 % (mass fraction) in natural iron ores, iron ore concentrates and agglomerates, including sinter products. The method is not applicable to iron ores containing more than 1,0 % (mass f

67678,IS,,ISO 4689-3:2015,Iron ores — Determination of sulfur content — Part 3: Combustion/infrared method,Minerais de fer — Dosage du soufre — Partie 3: Méthode par combustion et infrarouge,2015-07-20,2,['73.060.10'],ISO/TC 102/SC 2,9599,[35118],[72131],['en'],13,"<p>ISO 4689-3:2015 specifies a combustion/infrared method, using a high-frequency induction furnace, for the determination of the sulfur content of iron ores.</p><p>This method is applicable to sulfur contents between 0,002 % (mass fraction) and 0,25 % (mass fraction) in natural iron ores, iron ore concentrates and agglomerates, including sinter products. The method is not applicable to iron ores containing more than 1,0 % (mass f

10672,IS,,ISO 4690:1986,Iron ores — Determination of sulfur content — Combustion method,Minerais de fer — Dosage du soufre — Méthode par combustion,1986-07-17,1,['73.060.10'],ISO/TC 102/SC 2,9599,,"[35118,35119,21684]","['en','fr']",8,"<p>The method ist applicable to a concentration range of 0,002 to 0,25 % (m/m) of sulfur in natural iron ores, and iron ore concentrates and agglomerates including sinter products. The results are not affected by the presence of fluoride. Specifies principle, reagents, apparatus, sampling and samples, procedure, expression of results, and test report. ISO 4690 includes three annexes.</p>"

10673,IS,,ISO 4691:1985,Iron ores — Determination of titanium content — Diantipyrylmethane spectrophotometric method,Minerais de fer — Dosage du titane — Méthode spectrophotométrique au diantipyrylméthane,1985-12-19,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[45796],"['en','fr']",10,"<p>The method ist applicable to a concentration range of 0,01 to 6,0 % (m/m) of titanium in natural iron ores, and iron ore concentrates and agglomerates including sinter products. Specifies principle, reagents, apparatus, sampling and samples, procedure, expression of results, and test report. ISO 4691 includes three annexes.</p>"

10674,IS,,ISO 4692:1980,Iron ores — Determination of calcium and/or magnesium contents — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du calcium et du magnésium — Méthode par spectrométrie d'absorption atomique dans la flamme,1980-06-01,1,['73.060.10'],ISO/TC 102/SC 2,9599,,"[18234,18235]","['en','fr']",7,

10675,IS,,ISO 4693:1986,Iron ores — Determination of copper content — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du cuivre — Méthode par spectrométrie d'absorption atomique dans la flamme,1986-10-30,1,['73.060.10'],ISO/TC 102/SC 2,9599,,"[21685,43947]","['en','fr']",8,"<p>The method ist applicable to a concentration range of 0,003 to 1,0 % (m/m) of copper in natural iron ores, and iron ore concentrates and agglomerates including sinter products. Specifies principle, reagents, apparatus, sampling and samples, procedure, expression of results, and test report. ISO 4693 includes three annexes.</p>"

10677,IS,,ISO 4695:1984,Iron ores — Determination of reducibility,Minerais de fer — Détermination de la réductibilité,1984-06-01,1,['73.060'],ISO/TC 102/SC 3,9599,,[1544],"['en','fr']",7,

1544,IS,,ISO 4695:1995,Iron ores — Determination of reducibility,Minerais de fer — Détermination de la réductibilité,1995-11-09,2,['73.060.10'],ISO/TC 102/SC 3,9599,[10677],[38079],"['en','fr']",10,<p>Specifies a method for determining the reducibilty index of iron ores expressed as reduction rate of natural iron ores. Replaces the first edition of which have been technical revised.</p>

38079,IS,,ISO 4695:2007,Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index,Minerais de fer pour charges de hauts fourneaux — Détermination de la réductibilité à partir de la vitesse de réduction,2007-10-30,3,['73.060.10'],ISO/TC 102/SC 3,9599,[1544],[62141],['en'],12,"<p>ISO 4695:2007 specifies a method to provide a relative measure for evaluating the extent to and ease with which oxygen can be removed from iron ores, when reduced under conditions resembling those prevailing in the reduction zone of a blast furnace.</p><p>ISO 4695:2007 is applicable to lump ores, sinters and hot-bonded pellets.</p>"

62141,IS,,ISO 4695:2015,Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index,Minerais de fer pour charges de hauts fourneaux — Détermination de la réductibilité à partir de la vitesse de réduction,2015-08-20,4,['73.060.10'],ISO/TC 102/SC 3,9599,[38079],[82818],['en'],12,"<p>ISO 4695:2015 specifies a method to provide a relative measure for evaluating the extent to and ease with which oxygen can be removed from iron ores, when reduced under conditions resembling those prevailing in the reduction zone of a blast furnace.</p><p>ISO 4695:2015 is applicable to lump ores, sinters and hot-bonded pellets.</p><p><b> </b></p>"

1382,IS,,ISO 4696-1:1996,"Iron ores — Static test for low-temperature reduction-disintegration — Part 1: Reaction with CO, CO2 and H2","Minerais de fer — Essai statique de désagrégation par réduction à basse température — Partie 1: Réaction avec CO, CO2 et H2",1996-10-03,1,['73.060.10'],ISO/TC 102/SC 3,9599,[10678],[38078],"['en','fr']",10,

38078,IS,,ISO 4696-1:2007,"Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2","Minerais de fer pour charges de hauts fourneaux — Détermination des indices de désagrégation par réduction à basse température par méthode statique — Partie 1: Réduction avec CO, CO2, H2 et N2",2007-10-31,2,['73.060.10'],ISO/TC 102/SC 3,9599,[1382],[62136],"['en','ru']",11,"<p>ISO 4696-1:2007 specifies a method to provide a relative measure for evaluating the degree of size degradation of iron ores when reduced with carbon monoxide, carbon dioxide, hydrogen and nitrogen, under conditions resembling

10678,IS,,ISO 4696:1984,Iron ores — Low-temperature disintegration test — Method using cold tumbling after static reduction,Minerais de fer — Essai de désagrégation à basse température — Méthode au tambour à froid après réduction statique,1984-03-01,1,['73.060.10'],ISO/TC 102/SC 3,9599,,"[23326,1382]","['en','fr']",6,

23326,IS,,ISO 4696-2:1998,Iron ores — Static test for low-temperature reduction-disintegration — Part 2: Reaction with CO,Minerais de fer — Essai statique de désagrégation par réduction à basse température — Partie 2: Réaction avec CO,1998-07-23,1,['73.060.10'],ISO/TC 102/SC 3,9599,[10678],[38077],['en'],9,

38077,IS,,ISO 4696-2:2007,Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2,Minerais de fer pour charges de hauts fourneaux — Détermination des indices de désagrégation par réduction à basse température par méthode statique — Partie 2: Réduction avec CO et N2,2007-10-31,2,['73.060.10'],ISO/TC 102/SC 3,9599,[23326],[62137],"['en','ru']",10,"<p>ISO 4696-2:2007 specifies a method to provide a relative measure for evaluating the degree of size degradation of iron ores when reduced with carbon monoxide and nitrogen, under conditions resembling those prevailing in the low-temperature reduct