Withdrawn and superseded ISO standards — page 122 of 246

10532,IS,,ISO 4599:1986,Plastics — Determination of resistance to environmental stress cracking (ESC) — Bent strip method,Plastiques — Détermination de la fissuration sous contrainte dans un environnement donné (ESC) — Méthode de l'éprouvette courbée,1986-04-17,1,['83.080.01'],ISO/TC 61/SC 6,9599,,[34874],"['en','fr']",6,

10533,IS,,ISO 4600:1981,Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method,Plastiques — Détermination de la fissuration sous contrainte dans un environnement donné (ESC) — Méthode par enfoncement de billes ou de goupilles,1981-07-01,1,['83.080.01'],ISO/TC 61,9599,,[10534],['en'],7,

10534,IS,,ISO 4600:1992,Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method,Plastiques — Détermination de la fissuration sous contrainte dans un environnement donné (ESC) — Méthode par enfoncement de billes ou de goupilles,1992-08-20,2,['83.080.01'],ISO/TC 61/SC 6,9599,[10533],[34875],"['en','fr']",7,"<p>The test is applicable to finished products and to test specimens, prepared by moulding and/or machining, and can be used for the assessment of both environmental stress cracking of a plastic product or material exposed to different environments, and for the determination of ESC of different plastics materials exposed to a specific environment. An

10535,IS,,ISO 4602:1978,Textile glass — Woven fabrics — Determination of number of yarns per unit length of warp and weft,Verre textile — Tissus — Détermination du compte de fils de chaîne et de duites par unité de longueur,1978-07-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[25212],"['en','fr']",2,

25212,IS,,ISO 4602:1997,Reinforcements — Woven fabrics — Determination of number of yarns per unit length of warp and weft,Renforts — Tissus — Détermination du compte de fils de chaîne et de duites par unité de longueur,1997-12-04,2,['59.100.01'],ISO/TC 61/SC 13,9599,[10535],[52867],"['en','fr']",3,

10536,IS,,ISO 4603:1978,Textile glass — Woven fabrics — Determination of thickness,Verre textile — Tissus — Détermination de l'épaisseur,1978-07-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[10537],"['en','fr']",2,

10538,IS,,ISO 4604:1978,Textile glass — Woven fabrics — Determination of conventional flexural stiffness — Fixed angle flexometer method,Verre textile — Tissus — Détermination de la rigidité conventionnelle en flexion — Méthode du flexomètre à angle fixe,1978-10-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,"[1817,59252]","['en','fr']",3,

10539,IS,,ISO 4605:1978,Textile glass — Woven fabrics — Determination of mass per unit area,Verre textile — Tissus — Détermination de la masse surfacique,1978-11-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,"[25786,26877]","['en','fr']",2,

10540,IS,,ISO 4606:1979,Textile glass — Woven fabric — Determination of tensile breaking force and breaking elongation by the strip method,Verre textile — Tissus — Détermination de la force de rupture en traction et de l'allongement de rupture par la méthode de la bande,1979-10-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[10541],"['en','fr']",5,

10542,IS,,ISO 4607:1978,Plastics — Methods of exposure to natural weathering,Plastiques — Méthodes d'exposition aux intempéries,1978-11-01,1,['83.080.01'],ISO/TC 61/SC 6,9599,,[5263],"['en','fr']",7,

10543,IS,,ISO 4608:1977,Plastics — PVC resins for general use — Determination of plasticizer absorption at room temperature,Plastiques — Résines de polychlorure de vinyle à usages généraux — Détermination de la prise de plastifiant à froid,1977-10-01,1,['83.080.20'],ISO/TC 61,9599,,[10544],"['en','fr']",2,

10544,IS,,ISO 4608:1984,Plastics — Homopolymer and copolymer resins of vinyl chloride for general use — Determination of plasticizer absorption at room temperature,Plastiques — Résines d'homopolymères et de copolymères de chlorure de vinyle à usages généraux — Détermination de la prise de plastifiant à température ambiante,1984-12-01,2,['83.080.20'],ISO/TC 61/SC 9,9599,[10543],[25192],"['en','fr']",2,

25192,IS,,ISO 4608:1998,Plastics — Homopolymer and copolymer resins of vinyl chloride for general use — Determination of plasticizer absorption at room temperature,Plastiques — Résines d'homopolymères et de copolymères de chlorure de vinyle à usages généraux — Détermination de la prise de plastifiant à température ambiante,1998-04-23,3,['83.080.20'],ISO/TC 61/SC 9,9599,[10544],"[84617,46081]","['en','fr']",5,

4487,IS,,ISO 461-1:1985,"Aircraft — Connectors for ground electrical supplies — Part 1: Design, performance and test requirements","Aéronefs — Prises de courant d'alimentation au sol — Partie 1: Exigences concernant la conception, le fonctionnement et les essais",1985-04-11,1,"['49.100','49.060']",ISO/TC 20/SC 1,9599,[4486],[33310],"['en','fr']",4,"<p>Specifies the characteristics for connectors used to supply electrical power from a ground source to an aircraft. Describes the aircraft fixed connector (respectable) and the ground supply free connector (plug), their polarity or phase sequence, current ratings, control current female contact, sealing, voltage rating, replaceability of female c

10545,IS,,ISO 4610:1977,Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis using air-jet sieve apparatus,Plastiques — Résines d'homopolymères et copolymères de chlorure de vinyle — Analyse granulométrique sur tamiseuse à dépression d'air,1977-10-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,[15949],[30966],"['en','fr']",3,<p>Specifies a method for the determination of the sieve retention and particle size distribution of polyvinylchloride homopolymer and copolymer resins prepared by the 'suspension' and 'bulk' processes. Sieving is carried out with an air jet sieve apparatus. Generally 25 g shall be used for each sieve test. Each sieve retention is reported as a percentage

10546,IS,,ISO 4611:1980,"Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist","Plastiques — Détermination des effets d'une exposition à la chaleur humide, au brouillard d'eau et au brouillard salin",1980-03-01,1,['83.080.01'],ISO/TC 61/SC 6,9599,,[10547],"['en','fr']",7,

10547,IS,,ISO 4611:1987,"Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist","Plastiques — Détermination des effets d'une exposition à la chaleur humide, au brouillard d'eau et au brouillard salin",1987-12-10,2,['83.080.01'],ISO/TC 61/SC 6,9599,[10546],[43494],"['en','fr']",7,"<p>Specifies the exposure conditions of plastics under test to damp heat (steady state test or cyclic test), to water spray and to sodium chloride salt mist. Determination of one or more properties before and after given periods of exposure in the specified environmental conditions and observation of any change appearance. The test duration shall be as specified in the relevant

43494,IS,,ISO 4611:2008,"Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist","Plastiques — Détermination des effets d'une exposition à la chaleur humide, au brouillard d'eau et au brouillard salin",2008-10-02,3,['83.080.01'],ISO/TC 61/SC 6,9599,[10547],[54099],"['en','fr']",11,"<p>ISO 4611:2008 specifies the conditions of exposure of plastics to</p><ul><li>damp heat;</li><li>water spray;</li><li>salt mist;</li></ul><p>and the methods for the evaluation of the change in some significant characteristics after given exposure stages.</p><p>It is, in general, suitable for all plastics in the form of standard test specimens, and finished articles or parts t

10548,IS,,ISO 4612:1979,Plastics — PVC paste resins — Preparation of a paste,Plastiques — Résines PVC pour pâtes — Préparation d'une pâte,1979-08-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[25193],"['en','fr']",4,

25193,IS,,ISO 4612:1999,Plastics — Preparation of PVC pastes for test purposes — Planetary-mixer method,Plastiques — Préparation des pâtes PVC pour essais — Méthodes utilisant un mélangeur planétaire,1999-08-26,2,['83.080.20'],ISO/TC 61/SC 9,9599,[10548],[70416],"['en','fr']",6,

10549,IS,,ISO 4613-1:1985,Plastics — Ethylene/vinyl acetate copolymer thermoplastics (E/VAC) — Part 1: Designation,Plastiques — Thermoplastiques à base de copolymères éthylène/acétate de vinyle (E/VAC) — Partie 1: Désignation,1985-12-19,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[10550],"['en','fr']",5,

10550,IS,,ISO 4613-1:1993,Plastics — Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials — Part 1: Designation and specification,Plastiques — Matériaux à base de copolymères éthylène/acétate de vinyle (E/VAC) pour moulage et extrusion — Partie 1: Désignation et spécification,1993-10-07,2,['83.080.20'],ISO/TC 61/SC 9,9599,[10549],[70502],"['en','fr']",7,"<p>The types of E/VAC plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties vinyl acetate content and melt flow rate and on information about intended application and/or method of processing, important properties, additives, colorants, fillers and reinforci

10551,IS,,ISO 4613-2:1989,Plastics — Ethylene/vinyl acetate copolymer (E/VAC) thermoplastics — Part 2: Preparation of test specimens and determination of properties,Plastiques — Thermoplastiques à base de copolymères d'éthylène/acétate de vinyle (E/VAC) — Partie 2: Préparation des éprouvettes et détermination des caractéristiques,1989-10-19,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[21112],"['en','fr']",4,

21112,IS,,ISO 4613-2:1995,Plastics — Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Éthylène/acétate de vinyle (E/VAC) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1995-08-10,2,['83.080.20'],ISO/TC 61/SC 9,9599,[10551],"[45069,70503]","['en','fr']",5,<p>Specifies methods of preparation of test specimens and test methods to be used for the determination of the properties of ethylene/vinyl acetate moulding and extrusion materials. Specifies requirements for handling test material and for conditioning and gives properties and test methods whi

34832,IS,Amd,ISO 4613-2:1995/Amd 1:2004,Plastics — Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1,Plastiques — Éthylène/acétate de vinyle (E/VAC) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés — Amendement 1,2004-06-15,2,['83.080.20'],ISO/TC 61/SC 9,9599,,"[45069,70503]","['en','fr']",1,

10555,IS,,ISO 4617-1:1978,Paints and varnishes — List of equivalent terms — Part 1: General terms,Peintures et vernis — Liste des termes équivalents — Partie 1: Termes généraux,1978-02-01,1,"['01.040.87','87.040']",ISO/TC 35,9599,,[20367],"['en','fr']",2,

10556,IS,,ISO 4617-2:1982,Paints and varnishes — List of equivalent terms,Peintures et vernis — Liste des termes équivalents,1982-11-01,1,"['01.040.87','87.040']",ISO/TC 35,9599,,[20367],"['en','fr','ru']",3,

10557,IS,,ISO 4617-3:1986,Paints and varnishes — List of equivalent terms,Peintures et vernis — Liste des termes équivalents,1986-10-02,1,"['01.040.87','87.040']",ISO/TC 35,9599,,[20367],"['en','fr','ru']",3,

10558,IS,,ISO 4617-4:1986,Paints and varnishes — List of equivalent terms,Peintures et vernis — Liste des termes équivalents,1986-04-24,1,"['01.040.87','87.040']",ISO/TC 35,9599,,[20367],"['en','fr','ru']",3,

10559,IS,,ISO 4618-1:1978,Paints and varnishes — Vocabulary — Part 1: General terms,Peintures et vernis — Vocabulaire — Partie 1: Termes généraux,1978-02-01,1,"['01.040.87','87.040']",ISO/TC 35,9599,,[10560],"['en','fr']",5,

10561,IS,Add,ISO 4618-1:1978/Add 1:1982,Paints and varnishes — Vocabulary — Part 1: General terms — Addendum 1,Peintures et vernis — Vocabulaire — Partie 1: Termes généraux — Additif 1,1982-12-01,1,"['01.040.87','87.040']",ISO/TC 35,9599,,[10560],"['en','fr','ru']",1,

10560,IS,,ISO 4618-1:1984,Paints and varnishes — Vocabulary — Part 1: General terms,Peintures et vernis — Vocabulaire — Partie 1: Termes généraux,1984-11-01,2,"['01.040.87','87.040']",ISO/TC 35,9599,"[10561,10559]",[29549],"['en','fr','ru']",17,

29549,IS,,ISO 4618-1:1998,Paints and varnishes — Terms and definitions for coating materials — Part 1: General terms,Peintures et vernis — Termes et définitions pour produits de peinture — Partie 1: Termes généraux,1998-12-20,3,"['01.040.87','87.040']",ISO/TC 35,9599,[10560],[37545],"['en','fr']",18,

10562,IS,,ISO 4618-2:1984,Paints and varnishes — Vocabulary — Part 2: Terminology relating to initial defects and to undesirable changes in films during ageing,Peintures et vernis — Vocabulaire — Partie 2: Terminologie relative aux défectuosités initiales et aux altérations des feuils au cours de leur vieillissement,1984-11-01,1,"['01.040.87','87.040']",ISO/TC 35,9599,,[20369],"['en','fr','ru']",19,

20369,IS,,ISO 4618-2:1999,Paints and varnishes — Terms and definitions for coating materials — Part 2: Special terms relating to paint characteristics and properties,Peintures et vernis — Termes et définitions pour produits de peinture — Partie 2: Termes particuliers relatifs aux caractéristiques et aux propriétés des peintures,1999-06-17,2,"['01.040.87','87.040']",ISO/TC 35,9599,[10562],[37545],"['en','fr']",19,

37545,IS,,ISO 4618:2006,Paints and varnishes — Terms and definitions,Peintures et vernis — Termes et définitions,2006-10-12,1,"['01.040.87','87.040']",ISO/TC 35,9599,"[20369,26979,31806,29549]",[56502],"['en','fr','ru']",65,"<p>ISO 4618:2006 is a trilingual vocabulary which defines English, French and German terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes).</p><p>Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, e.g. corrosion protection, coating powders.</p>"

56502,IS,,ISO 4618:2014,Paints and varnishes — Terms and definitions,Peintures et vernis — Termes et définitions,2014-10-15,2,"['01.040.87','87.040']",ISO/TC 35,9599,[37545],[81386],"['de','en','fr','ru']",125,"<p>ISO 4618:2014 defines terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes). Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, e.g. corrosion protection, coating powders.</p><p>Terms and definitions from ISO 4618:2014 can be viewed free of charge on the ISO online browsing platform (OBP): https://www.iso.org/obp/ui/</p>"

10564,IS,,ISO 4618-3:1984,Paints and varnishes — Vocabulary — Part 3: Terminology of resins,Peintures et vernis — Vocabulaire — Partie 3: Terminologie des résines,1984-11-01,1,"['01.040.87','87.060.20']",ISO/TC 35,9599,,[26979],"['en','fr','ru']",9,

26979,IS,,ISO 4618-3:1999,Paints and varnishes — Terms and definitions for coating materials — Part 3: Surface preparation and methods of application,Peintures et vernis — Termes et définitions pour produits de peinture — Partie 3: Préparation de surfaces et méthodes d'application,1999-06-17,2,"['01.040.87','25.220.10','87.040']",ISO/TC 35,9599,[10564],[37545],"['en','fr']",20,

10566,IS,,ISO 4619:1980,Driers for paints and varnishes,Siccatifs pour peintures et vernis,1980-08-01,1,['87.060.99'],ISO/TC 35,9599,,[20366],"['en','fr']",11,

20366,IS,,ISO 4619:1998,Driers for paints and varnishes,Siccatifs pour peintures et vernis,1998-03-19,2,['87.060.99'],ISO/TC 35,9599,[10566],[69629],"['en','fr']",17,

10569,IS,,ISO 4622:1980,Paints and varnishes — Pressure test for stackability,Peintures et vernis — Essai de pression pour aptitude à l'empilement,1980-11-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[10570],"['en','fr']",3,

10570,IS,,ISO 4622:1992,Paints and varnishes — Pressure test for stackability,Peintures et vernis — Essai de pression pour aptitude à l'empilement,1992-12-03,2,['87.040'],ISO/TC 35/SC 9,9599,[10569],[50486],"['en','fr']",5,"<p>Specifies a test method for determining, under standard conditions, whether a single-coat film or a multi-coat system of paints after a specified drying period is sufficiently dry to resist damage when two painted surfaces or one painted surface and another surface are placed in contact under pressure. For any particular application, it needs to be completed by supplementary information.</p>"

28227,IS,,ISO 4623-1:2000,Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates,Peintures et vernis — Détermination de la résistance à la corrosion filiforme — Partie 1: Subjectiles en acier,2000-08-31,1,['87.040'],ISO/TC 35/SC 9,9599,[10571],[71588],"['en','fr','ru']",7,

10571,IS,,ISO 4623:1984,Paints and varnishes — Filiform corrosion test on steel,Peintures et vernis — Essai de corrosion filiforme sur acier,1984-06-01,1,['87.040'],ISO/TC 35/SC 9,9599,,"[32089,28227,28801]","['en','fr']",5,

28801,IS,,ISO 4623-2:2003,Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates,Peintures et vernis — Détermination de la résistance à la corrosion filiforme — Partie 2: Subjectiles en aluminium,2003-03-09,1,['87.040'],ISO/TC 35/SC 9,9599,[10571],[64856],"['en','fr','ru']",6,<p>ISO 4623-2:2003 describes a test procedure for assessing the protective action of coatings of paints or varnishes on aluminium against filiform corrosion arising from a scribe mark cut through the coating.</p><p>It is only suitable for assessing the performance of the coating/substrate combination tested. It is not suitable for predicting the performance of the coating

42044,IS,Cor,ISO 4623-2:2003/Cor 1:2005,Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates — Technical Corrigendum 1,Peintures et vernis — Détermination de la résistance à la corrosion filiforme — Partie 2: Subjectiles en aluminium — Rectificatif technique 1,2005-04-25,1,['87.040'],ISO/TC 35/SC 9,9599,,[64856],"['en','fr','ru']",1,

10572,IS,,ISO 4624:1978,Paints and varnishes — Pull-off test for adhesion,Peintures et vernis — Essai de traction,1978-07-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[26620],"['en','fr']",7,"<p>Specifies a method for assessing the adhesion of a single coating or a multi-coat system of a coating material by measuring the minimum tensile stress necessary to detach or to rupture the coating in a direction perpendicular to the substrate. The test may be applied using a wide range of substrates. Different procedures are specified according to whether the substrate is deformable, for example sheet metal or plastics, or rigid, for example thick concrete. The result is the minimum tensile stress necessary

26620,IS,,ISO 4624:2002,Paints and varnishes — Pull-off test for adhesion,Peintures et vernis — Essai de traction,2002-03-07,2,['87.040'],ISO/TC 35/SC 9,9599,[10572],[62351],"['en','fr']",11,"<p>This International Standard describes methods for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.</p><p>These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion.</p><p>The test may be applied using a wide range of substrates. Different procedures

62351,IS,,ISO 4624:2016,Paints and varnishes — Pull-off test for adhesion,Peintures et vernis — Essai de traction,2016-02-25,3,['87.040'],ISO/TC 35/SC 9,9599,[26620],[83350],"['en','fr']",11,"<p>ISO 4624:2016 specifies three methods (i.e. one dolly or two dollies on a painted panel and two dollies, one as painted substrate) for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.</p><p>These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion.

40498,IS,,ISO 4625-1:2004,Binders for paints and varnishes — Determination of softening point — Part 1: Ring-and-ball method,Liants pour peintures et vernis — Détermination du point de ramollissement — Partie 1: Méthode de l'anneau et de la bille,2004-08-24,1,['87.060.20'],ISO/TC 35,9599,[10573],[76362],"['en','fr','ru']",10,<p>ISO 4625-1:2004 specifies methods of determining the softening point of resins (including rosin) and similar materials by means of the ring-and-ball apparatus.</p><p>Both manual and automatic methods are specified.</p>

10573,IS,,ISO 4625:1980,Binders for paints and varnishes — Determination of softening point — Ring-and-ball method,Liants pour peintures et vernis — Détermination du point de ramollissement — Méthode de l'anneau et de la bille,1980-03-01,1,['87.060.20'],ISO/TC 35,9599,,"[26994,40498]","['en','fr']",7,"<p>Specifies a method of test for resins (including rosin) and similar materials by means of the ring-and-ball apparatus. In general, with materials of this type, softening does not take place at a definite temperature. As the temperature rises, these materials gradually and imperceptibly change from brittle or exceedingly thick and slow-flowing materials to softer and less viscous liquids. For

10574,IS,,ISO 4626:1980,Volatile organic liquids — Determination of boiling range of organic solvents used as raw materials,Liquides organiques volatils — Détermination de l'intervalle de distillation des solvants organiques utilisés comme matières premières,1980-03-01,1,['87.060.30'],ISO/TC 35,9599,,[83915],"['en','fr']",12,"<p>This method is applicable to organic liquids that boil between 30 and 300 C at normal pressure, and that are chemically stable and do not corrode the apparatus during the distillation such as hydrocarbons, esters, alcohols, ketones, ethers and similar products. The principle consists in distillation of a 100 ml test portion under prescribed conditions, systematic obs

10576,IS,,ISO 4628-1:1978,Paints and varnishes — Evaluation of degradation of paint coatings — Designation of quantity and size of common types of defect — Part 1: General principles and pictorial scales for blistering and rusting,Peintures et vernis — Évaluation de la dégradation des surfaces peintes — Désignation de la quantité et de la dimension des types courants de défauts — Partie 1: Principes généraux et échelles illustrées de cloquage et d'enrouillement,1978-07-01,1,['87.040'],ISO/TC 35/SC 9,9599,,"[10579,10580,10577]","['en','fr']",,

10577,IS,,ISO 4628-1:1982,"Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 1: General principles and rating schemes","Peintures et vernis — Évaluation de la dégradation des surfaces peintes — Désignation de l'intensité, de la quantité et de la dimension des types courants de défauts — Partie 1: Principes généraux et modes de cotation",1982-05-01,2,['87.040'],ISO/TC 35/SC 9,9599,[10576],[29561],"['en','fr']",2,"<p>Establishes a general system for designating the intensity, quantity and size of common types of defects and outlines the basic principles of the system in respect of designation of the

29561,IS,,ISO 4628-1:2003,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 1: Introduction générale et système de désignation",2003-09-10,3,['87.040'],ISO/TC 35/SC 9,9599,[10577],[64877],"['en','fr','ru']",3,"<p>ISO 4628-1:2003 defines a system for designating the quantity and size of defects and the intensity of changes in the appearance of

32089,IS,,ISO 4628-10:2003,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 10: Évaluation du degré de corrosion filiforme",2003-09-17,1,['87.040'],ISO/TC 35/SC 9,9599,[10571],[66404],"['en','fr']",6,<p>ISO 4628-10:2003 describes a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of t

66404,IS,,ISO 4628-10:2016,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et des dimensions des défauts, et de l'intensité des changements uniformes d'aspect — Partie 10: Évaluation du degré de corrosion filiforme",2016-01-12,2,['87.040'],ISO/TC 35/SC 9,9599,[32089],[83326],"['en','fr']",8,"<p>ISO 4628-10:2016 specifies a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of t

10579,IS,,ISO 4628-2:1982,"Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 2: Designation of degree of blistering","Peintures et vernis — Évaluation de la dégradation des surfaces peintes — Désignation de l'intensité, de la quantité et de la dimension des types courants de défauts — Partie 2: Désignation du degré de cloquage",1982-05-01,1,['87.040'],ISO/TC 35/SC 9,9599,[10576],[29562],"['en','fr']",5,<p>This document provides pictorial standards for designating the degree of blistering. The principle of the method consists in rating the density and size of the blisters by means of the pictorial

29562,IS,,ISO 4628-2:2003,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 2: Évaluation du degré de cloquage",2003-09-10,2,['87.040'],ISO/TC 35/SC 9,9599,[10579],[66399],"['en','fr','ru']",12,"<p>ISO 4628-2:2003 describes a method for assessing the degree of blistering of coatings by comparison with pictorial standards.</p><p>NOTE The pictorial stand

10580,IS,,ISO 4628-3:1982,"Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 3: Designation of degree of rusting","Peintures et vernis — Évaluation de la dégradation des surfaces peintes — Désignation de l'intensité, de la quantité et de la dimension des types courants de défauts — Partie 3: Désignation du degré d'enrouillement",1982-05-01,1,['87.040'],ISO/TC 35/SC 9,9599,[10576],[29563],"['en','fr']",7,<p>This document provides pictorial standards for designating the degree of rusting. The standards given are basically indended for rating on coated steel. They may used for designating the degree

29563,IS,,ISO 4628-3:2003,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 3: Évaluation du degré d'enrouillement",2003-09-10,2,['87.040'],ISO/TC 35/SC 9,9599,[10580],[66400],"['en','fr','ru']",14,"<p>ISO 4628-3:2003 describes a method for assessing the degree of rusting of coatings by comparison with pictorial standards.</p><p>The pictorial standards pr

66400,IS,,ISO 4628-3:2016,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 3: Évaluation du degré d'enrouillement",2016-01-12,3,['87.040'],ISO/TC 35/SC 9,9599,[29563],[83324],"['en','fr']",15,"<p>ISO 4628-3:2016 specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards.</p><p>The pictorial standards provide

10581,IS,,ISO 4628-4:1982,"Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 4: Designation of degree of cracking","Peintures et vernis — Évaluation de la dégradation des surfaces peintes — Désignation de l'intensité, de la quantité et de la dimension des types courants de défauts — Partie 4: Désignation du degré de craquelage",1982-05-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[29564],"['en','fr']",4,"<p>Provides pictorial standards for designating. The quantity of cracking is rated by reference to table 2 of ISO 4628/1 and using as examples figures 1 or 2, depending on the type of cracking. The averag

29564,IS,,ISO 4628-4:2003,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 4: Évaluation du degré de craquelage",2003-09-12,2,['87.040'],ISO/TC 35/SC 9,9599,[10581],[66401],"['en','fr','ru']",13,"<p>ISO 4628-4:2003 describes a method for assessing the degree of cracking of coatings by comparison with pictorial standards, using the designation system def

10582,IS,,ISO 4628-5:1982,"Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 5: Designation of degree of flaking","Peintures et vernis — Évaluation de la dégradation des surfaces peintes — Désignation de l'intensité, de la quantité et de la dimension des types courants de défauts — Partie 5: Désignation du degré d'écaillage",1982-05-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[29565],"['en','fr']",4,"<p>Provides pictorial standards for rating of flaking. The quantity of damage is rated on the basis of the relative area flaked, by reference to table 1 and using the figures 1 and 2 as examples.</p>" 10583,

29565,IS,,ISO 4628-5:2003,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 5: Évaluation du degré d'écaillage",2003-09-12,2,['87.040'],ISO/TC 35/SC 9,9599,[10582],[66402],"['en','fr','ru']",5,"<p>ISO 4628-5:2003 describes a method for assessing the degree of flaking of coatings by comparison with pictorial standards, using the designation system defined

66402,IS,,ISO 4628-5:2016,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 5: Évaluation du degré d'écaillage",2016-01-12,3,['87.040'],ISO/TC 35/SC 9,9599,[29565],[83325],"['en','fr']",6,"<p>ISO 4628-5:2016 specifies a method for assessing the degree of flaking of coatings by comparison with pictorial standards.</p><p>ISO 4628‑1 defines the system used f

10583,IS,,ISO 4628-6:1990,"Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 6: Rating of degree of chalking by tape method","Peintures et vernis — Évaluation de la dégradation des surfaces peintes — Désignation de l'intensité, de la quantité et de la dimension des types courants de défauts — Partie 6: Cotation du degré de farinage par la méthode du ruban adhésif",1990-12-20,1,['87.040'],ISO/TC 35/SC 9,9599,,[37488],"['en','fr']",3,"<p>ISO 4628 is a series of standards dealing with the sampling and testing of paints, varnishes and related products. This part provides pictorial reference standards

37488,IS,,ISO 4628-6:2007,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 6: Évaluation du degré de farinage par la méthode du ruban adhésif",2007-01-11,2,['87.040'],ISO/TC 35/SC 9,9599,[10583],[51921],"['en','fr','ru']",6,"<p>ISO 4628-6:2007 provides pictorial reference standards for designating the degree of chalking of paint coatings.

51921,IS,,ISO 4628-6:2011,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 6: Évaluation du degré de farinage par la méthode du ruban adhésif",2011-08-30,3,['87.040'],ISO/TC 35/SC 9,9599,[37488],[85312],"['en','fr','ru']",5,<p>ISO 4628-6:2011 provides pictorial reference standards for designating the degree of chalking of paint coatings.

26848,IS,,ISO 4628-7:2003,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 7: Évaluation du degré de farinage par la méthode du morceau de velours",2003-09-15,1,['87.040'],ISO/TC 35/SC 9,9599,,[66403],"['en','fr','ru']",3,"<p>ISO 4628-7:2003 describes a method suitable, in particular, for rating the degree of chalking on white or colour

26849,IS,,ISO 4628-8:2005,"Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe","Peintures et vernis — Évaluation de la dégradation des revêtements — Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect — Partie 8: Évaluation du degré de décollement et de corrosion autour d'une rayure",2005-03-09,1,['87.040'],ISO/TC 35/SC 9,9599,,[51942],"['en','fr','ru']",7,"<p>ISO 4628-8:2005 specifies a method for assessing delamination and corrosion, caused by a corr

10584,IS,,ISO 4629:1978,Paint media — Determination of hydroxyl value — Titrimetric method,Liants pour peintures — Détermination de l'indice d'hydroxyle — Méthode titrimétrique,1978-11-01,1,['87.060.20'],ISO/TC 35,9599,,[10585],"['en','fr']",3,

10585,IS,,ISO 4629:1996,Binders for paints and varnishes — Determination of hydroxyl value — Titrimetric method,Liants pour peintures et vernis — Détermination de l'indice d'hydroxyle — Méthode titrimétrique,1996-06-06,2,['87.060.20'],ISO/TC 35,9599,[10584],"[36630,67213]","['en','fr']",4,"<p>Specifies a titrimetric method for determining the free hydroxyl groups in binders and binder solutions for paints and varnishes. The hydroxyl groups may be present as polyhydric alcohols, partial esters, polyester end groups or hydroxylated fatty acids. Replaces the first edition.</p>"

34148,IS,,ISO 4630-1:2004,Clear liquids — Estimation of colour by the Gardner colour scale — Part 1: Visual method,Liquides clairs — Évaluation de la couleur au moyen de l'échelle Gardner — Partie 1: Méthode visuelle,2004-11-24,1,['87.060.20'],ISO/TC 35,9599,[10587],[63297],"['en','fr','ru']",7,"<p>ISO 4630-1:2004 specifies a method for estimating, by means of the Gardner colour scale, the colour of clear, yellow/brown liquid products using colour-measuring instruments. The results may be invalid if other products are tested.</p><p>It is applicable to drying oils, varnishes and solutions of fatty acids, polymerized fatty acids, resins, tall oil, tall oil fatty acids, rosin and related produc

10587,IS,,ISO 4630:1997,Binders for paints and varnishes — Estimation of colour of clear liquids by the Gardner colour scale,Liants pour peintures et vernis — Évaluation de la couleur des liquides non opaques au moyen de l'échelle Gardner,1997-05-15,2,['87.060.20'],ISO/TC 35,9599,,[34148],['en'],7,

34149,IS,,ISO 4630-2:2004,Clear liquids — Estimation of colour by the Gardner colour scale — Part 2: Spectrophotometric method,Liquides clairs — Évaluation de la couleur au moyen de l'échelle Gardner — Partie 2: Méthode spectrophotométrique,2004-11-24,1,['87.060.20'],ISO/TC 35,9599,,[63297],"['en','fr','ru']",6,"<p>ISO 4630-2:2004 specifies a method for estimating, by means of the Gardner colour scale, the colour of clear, yellow/brown liquid products using colour-measuring instruments. The results may be invalid if other products are tested. The test uses the Gardner colour scale described in ISO 4630-1, which describes a visual method.</p><p>The method is applicable to drying oils, varnish

10589,IS,,ISO 4632-1:1982,"Rubber, vulcanized — Classification — Part 1: Description of the classification system",Caoutchouc vulcanisé — Classification — Partie 1: Description du système de classification,1982-08-01,1,['83.060'],ISO/TC 45,9599,,[10588],"['en','fr']",10,

10590,IS,,ISO 4633:1983,"Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials",Joints étanches en caoutchouc — Garnitures de joints de canalisations d'adduction et d'évacuation d'eau (égouts inclus) — Spécification des matériaux,1983-06-01,1,"['83.140.50','91.140.80','91.140.60']",ISO/TC 45/SC 4,9599,[5984],[10591],"['en','fr']",4,

10591,IS,,ISO 4633:1996,"Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials",Joints étanches en caoutchouc — Garnitures de joints de canalisations d'adduction et d'évacuation d'eau (égouts inclus) — Spécification des matériaux,1996-09-26,2,"['83.140.50','91.140.80','91.140.60']",ISO/TC 45/SC 4,9599,[10590],[32972],"['en','fr']",12,

32972,IS,,ISO 4633:2002,"Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials",Joints étanches en caoutchouc — Garnitures de joints de canalisations d'adduction et d'évacuation d'eau (égouts inclus) — Spécification des matériaux,2002-05-09,3,"['83.140.50','91.140.80','91.140.60']",ISO/TC 45/SC 4,9599,[10591],[63707],"['en','fr']",12,"<p>This International Standard specifies requirements for materials used in vulcanized rubber seals for</p><ul><li> cold drinking-water supplies (up to 50 °C);</li><li> drainage, sewerage and rainwater systems (continuous flow up to 45 <b>°</b>C and intermittent flow up to 95 °C).</li></ul><p>The different de

63707,IS,,ISO 4633:2015,"Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials",Joints étanches en caoutchouc — Garnitures de joints de canalisations d'adduction et d'évacuation d'eau (égouts inclus) — Spécification des matériaux,2015-06-03,4,"['83.140.50','91.140.80','91.140.60']",ISO/TC 45/SC 4,9599,[32972],[82602],['en'],12,"<p>ISO 4633:2015 specifies requirements for materials used in vulcanized rubber seals for the following:</p><p>a) cold drinking-water supplies (up to 50 °C);</p><p>b) drainage, sewerage, and rainwater systems (continuous flow up to 45 <b>°</b>C and intermittent flow up to 95 °C).</p>"

10593,IS,,ISO 4635:1982,"Rubber, vulcanized — Preformed compression seals for use between concrete motorway paving sections — Specification for material",Caoutchouc vulcanisé — Joints de compression préformés utilisés entre les dalles d'autoroute en béton — Spécifications pour le matériau,1982-12-01,1,"['83.140.50','91.100.50']",ISO/TC 45/SC 4,9599,,[45994],"['en','fr']",3,"<p>Does not cover design or dimensions of seals, but tolerances should be described in accordance with ISO 3302. Is based on experience with chloroprene rubber. Work is in progress to take account of material development in this field. The requirements are summarized in a table. The annex refers to the determination of re

10596,IS,,ISO 4639-1:1987,Rubber tubing and hoses for fuel circuits for internal combustion engines — Specification — Part 1: Conventional liquid fuels,Tuyaux et tubes en caoutchouc pour circuits à carburants pour moteurs à combustion interne — Spécifications — Partie 1: Carburants liquides conventionnels,1987-08-27,1,"['27.020','83.140.40']",ISO/TC 45/SC 1,9599,,"[32054,32055]","['en','fr']",10,"<p>Specifies requirements for use in fuel circuits. Does not cover any equipment used for the distribution of liquid fuels. Differentiates three types with regard to the pressure: up to 0.12 MPa; 0 to 0.12 MPa; 0 to 0.3 MPa. The three types are divided into two further grades: one operating in envir

10597,IS,,ISO 4639-2:1995,Rubber tubing and hoses for fuel circuits for internal-combustion engines — Specification — Part 2: Oxygenated fuels,Tuyaux et tubes en caoutchouc pour circuits à carburants pour moteurs à combustion interne — Spécifications — Partie 2: Carburants oxygénés,1995-06-15,1,"['27.020','83.140.40']",ISO/TC 45/SC 1,9599,,"[32054,32055]","['en','fr']",17,<p>Specifies requirements for rubber tubing and hoses for use in fuel circuits using liquid fuels containing oxygenated compounds such as alcohols. Does not cover equipment used for the distribution of liquid fuels. The hoses and unreinforced tubing are used in conventional carburettor systems where fuel is unlikely to beco

10598,IS,,ISO 4639-3:1995,Rubber tubing and hoses for fuel circuits for internal-combustion engines — Specification — Part 3: Oxidized fuels,Tuyaux et tubes en caoutchouc pour circuits à carburant pour moteurs à combustion interne — Spécifications — Partie 3: Carburants oxydés,1995-06-15,1,"['27.020','83.140.40']",ISO/TC 45/SC 1,9599,,"[32054,32055]","['en','fr']",18,"<p>Specifies requirements for rubber tubing and hoses for use in fuel circuits where the fuel can become oxidized or 'sour'. Does not cover any equipment used for the distribution of liquid fuels, nor tubing totally immersed in fuel tanks. The hoses and tubing are used in recirculating fuel injection systems and in other system

4492,IS,,ISO 464:1976,Rolling bearings with locating snap ring — Dimensions,Roulements à segment d'arrêt — Dimensions,1976-04-01,1,['21.100.20'],ISO/TC 4,9599,[7082],[20521],"['en','fr']",5,

20521,IS,,ISO 464:1995,Rolling bearings — Radial bearings with locating snap ring — Dimensions and tolerances,Roulements — Roulements radiaux à segment d'arrêt — Dimensions et tolérances,1995-05-18,2,['21.100.20'],ISO/TC 4/SC 4,9599,[4492],[60130],"['en','fr']",8,"<p>Cancels and replaces the first edition (1976). Specifies the snap ring groove dimensions, minimum chamfer dimensions on the snap ring groove side of the outer ring and the snap ring dimensions for radial bearings in dimension series 18 and 19 and diameter series 0, 2, 3 and 4 (except dimension series 00, 82 and 83), as specified in ISO 15.</p>"

10599,IS,,ISO 4641:1979,Rubber products — Textile-reinforced hoses for water suction,Produits en caoutchouc — Tuyaux à armature textile pour aspiration d'eau,1979-07-01,1,['23.040.70'],ISO/TC 45,9599,,[10600],"['en','fr']",3,

10600,IS,,ISO 4641:1991,Rubber hoses for water suction and discharge — Specification,Tuyaux en caoutchouc pour aspiration et refoulement d'eau — Spécifications,1991-06-27,2,['23.040.70'],ISO/TC 45/SC 1,9599,[10599],[40238],"['en','fr']",2,

40238,IS,,ISO 4641:2005,Rubber hoses and hose assemblies for water suction and discharge — Specification,Tuyaux et flexibles en caoutchouc pour aspiration et refoulement d'eau — Spécifications,2005-10-10,3,['23.040.70'],ISO/TC 45/SC 1,9599,[10600],[53014],"['en','fr']",10,"<p>ISO 4641:2005 specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies.</p><p>Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:</p><ul><li>ambient temperatures: -25 °C to +70 °C;</li><li>water temperatures during operation: 0 °C to +70 °C.</li></

53014,IS,,ISO 4641:2010,Rubber hoses and hose assemblies for water suction and discharge — Specification,Tuyaux et flexibles en caoutchouc pour aspiration et refoulement d'eau — Spécifications,2010-08-19,4,['23.040.70'],ISO/TC 45/SC 1,9599,[40238],[70353],"['en','fr','ru']",11,"<p>ISO 4641:2010 specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies.</p><p>Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:</p><ul><li>ambient temperatures: –25 °C to +70 °C;</li><li>water temperatures during operation: 0 °C to +70 °C.</

70353,IS,,ISO 4641:2016,Rubber hoses and hose assemblies for water suction and discharge — Specification,Tuyaux et flexibles en caoutchouc pour aspiration et refoulement d'eau — Spécifications,2016-11-24,5,['23.040.70'],ISO/TC 45/SC 1,9599,[53014],[84061],"['en','fr']",11,"<p>ISO 4641:2016 specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies.</p><p>Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:</p><p>- ambient temperatures: −25 °C to +70 °C;</p><p>- water temperatures during operation: 0 °C to +70 °C.

41595,IS,,ISO 4642-1:2009,"Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems","Tuyaux en caoutchouc et en plastique, non aplatissables, pour la lutte contre l'incendie — Partie 1: Tuyaux semi-rigides pour systèmes fixes",2009-01-29,1,"['83.140.40','13.220.10']",ISO/TC 45/SC 1,9599,[10601],[68031],['en'],18,"<p>ISO 4642-1:2009 specifies the requirements and test methods for semi-rigid reel hoses for fire-fighting purposes for use with fixed systems. The hoses are intended for use at a maximum working pressure of 1,2 MPa for hoses of 19 mm and 25 mm inside diameter and 0,7 MPa for hoses of 33 mm inside diameter.</p><p>Hoses confo

10601,IS,,ISO 4642:1978,"Rubber products — Hoses, non-collapsible, for fire-fighting service",Produits en caoutchouc — Tuyaux d'incendie non aplatissables,1978-12-01,1,"['83.140.40','13.220.10']",ISO/TC 45/SC 1,9599,,"[43705,41595]","['en','fr']",4,"<p>Specifies requirements for two types and five grades; suitable for use on portable and wheeled fire extinguishers, on wall-mounted fire hose reels and as booster hoses on five apparatus. The types differ according to the temperature of chemicals, the grade in dependence on the working pressure. Contains five tables with special details and three annexes for determination of cover and lining thickness.</p>"

43705,IS,,ISO 4642-2:2009,"Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles","Tuyaux en caoutchouc et en plastique, non aplatissables, pour la lutte contre l'incendie — Partie 2: Tuyaux (et flexibles) semi-rigides pour pompes et véhicules",2009-01-29,1,"['83.140.40','13.220.10']",ISO/TC 45/SC 1,9599,[10601],[68032],['en'],28,"<p>ISO 4642-2:2009 specifies the requirements and test methods for semi-rigid reel hoses for use on fire fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high press

10603,IS,,ISO 4643:1980,Plastics moulded footwear — Polyvinyl chloride industrial boots — Specification,Chaussures moulées en plastique — Bottes industrielles en chlorure de polyvinyl — Spécifications,1980-07-01,1,"['13.340.50','83.140.99']",ISO/TC 45,9599,,[10604],"['en','fr']",9,

10605,IS,,ISO 4645:1984,Rubber and rubber products — Guide to the identification of antidegradants — Thin layer chromatographic methods,Caoutchouc et produits en caoutchouc — Guide d'identification des agents de protection — Méthodes par chromatographie en couche mince,1984-10-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[82449],"['en','fr']",6,"<p>Specifies two methods: a simplified and a more detailed one. Concerns principle, reagents (with an additional warning for handling), apparatus, preparation of developing tank and plates, preparation of the test plate, plate spotting, plate development, colour development on the plate and standard chromatograms. One annex for preliminary spot tests.</p>" 1

10606,IS,Cor,ISO 4645:1984/Cor 1:1991,Rubber and rubber products — Guide to the identification of antidegradants — Thin layer chromatographic methods — Technical Corrigendum 1,Caoutchouc et produits en caoutchouc — Guide d'identification des agents de protection — Méthodes par chromatographie en couche mince — Rectificatif technique 1,1991-06-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[82449],"['en','fr']",1,