Withdrawn and superseded ISO standards — page 104 of 246

8775,IS,,ISO 3449:1980,Earth-moving machinery — Falling-object protective structures — Laboratory test and performance requirements,Engins de terrassement — Structures de protection contre les chutes d'objets — Essais de laboratoire et critères de performance,1980-02-01,2,['53.100'],ISO/TC 127,9599,,[8776],"['en','fr']",8,

8777,IS,Amd,ISO 3449:1980/Amd 1:1980,Earth-moving machinery — Falling-object protective structures — Laboratory test and performance requirements — Amendment 1,Engins de terrassement — Structures de protection contre les chutes d'objets — Essais de laboratoire et critères de performance — Amendement 1,1980-12-01,2,['53.100'],ISO/TC 127,9599,,"[8778,8776]",['en'],1,

8776,IS,,ISO 3449:1984,Earth-moving machinery - Falling-object protective structures — Laboratory tests and performance requirements,Engins de terrassement - Structures de protection contre les chutes d'objets - Essais de laboratoire et critères de performance,1984-04-01,3,['53.100'],ISO/TC 127/SC 2,9599,"[8775,8777]",[8778],"['en','fr']",8,

8778,IS,,ISO 3449:1992,Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements,Engins de terrassement — Structures de protection contre les chutes d'objets — Essais de laboratoire et critères de performance,1992-05-14,4,['53.100'],ISO/TC 127/SC 2,9599,"[8776,8777]","[32900,30305]","['en','fr']",8,"<p>Establishes a consistent, repeatable means of evaluating characteristics of falling-object protective structures under loading and prescribes performance requirements for these structures under such loading in a representative test. Applies to the following types of operator-controlled machines: a) crawler loaders, wheel loaders and backhoe l

8779,IS,,ISO 3450:1975,Off-highway earth-moving machinery — Minimum performance criteria for brake systems,Engins de terrassement hors-route — Critères de performance minimale des systèmes de freinage,1975-05-01,1,['53.100'],ISO/TC 127/SC 2,9599,,[8780],"['en','fr']",5,

8780,IS,,ISO 3450:1985,Earth-moving machinery — Wheeled machines — Performance requirements and test procedures for braking systems,Engins de terrassement — Engins sur roues — Exigences de performance et procédures d'essai des systèmes de freinage,1985-10-17,2,['53.100'],ISO/TC 127/SC 2,9599,[8779],[20731],"['en','fr']",6,

20731,IS,,ISO 3450:1996,Earth-moving machinery — Braking systems of rubber-tyred machines — Systems and performance requirements and test procedures,"Engins de terrassement — Dispositifs de freinage des engins sur roues équipés de pneumatiques — Exigences relatives aux dispositifs et à leurs performances, et méthodes d'essai",1996-03-28,3,['53.100'],ISO/TC 127/SC 2,9599,[8780],[42076],"['en','fr']",8,<p>Specifies minimum performance and test criteria for brake systems to enable uniform assessment of the braking capability of earth-moving machinery which operates on work sites or travels on public roads.</p>

8782,IS,,ISO 3451-1:1997,Plastics — Determination of ash — Part 1: General methods,Plastiques — Détermination du taux de cendres — Partie 1: Méthodes générales,1997-07-10,3,['83.080.01'],ISO/TC 61/SC 5,9599,,"[36265,41663]","['en','fr']",5,

41663,IS,,ISO 3451-1:2008,Plastics — Determination of ash — Part 1: General methods,Plastiques — Détermination du taux de cendres — Partie 1: Méthodes générales,2008-07-21,4,['83.080.01'],ISO/TC 61/SC 5,9599,[8782],"[71205,61920]","['en','fr']",6,"<p>ISO 3451-1:2008 specifies general methods, with suitable test conditions, for the determination of the ash of a range of plastics (resins and compounds). The particular conditions chosen may be included in the specifications for the plastic material in question.</p><p>Particular conditions applicable to poly(alkylene terephthalate) materials, unplasticized cellulose acetate, polyamides and poly(vinyl chloride) plastics, including some specific f

71205,IS,,ISO 3451-1:2019,Plastics — Determination of ash — Part 1: General methods,Plastiques — Détermination du taux de cendres — Partie 1: Méthodes générales,2019-02-06,5,['83.080.01'],ISO/TC 61/SC 5,9599,[41663],[91099],"['en','fr']",9,"<p>This document specifies general methods, with suitable test conditions, for the determination of the ash of a range of plastics. The particular conditions chosen can be included in the specifications for the plastic material in question.</p><p>Particular conditions applicable to poly(alkylene terephthalate) materials, unplasticized cellulose acetate, polyamides and poly(vinyl chloride) plastics, including some specific filled, glass-fibre-reinforced an

8783,IS,,ISO 3451-2:1984,Plastics — Determination of ash — Part 2: Polyalkylene terephthalates,Plastiques — Détermination du taux de cendres — Partie 2: Polyalkylène téréphtalates,1984-05-01,1,['83.080.20'],ISO/TC 61/SC 5,9599,,[27077],"['en','fr']",2,

8785,IS,,ISO 3451-4:1986,Plastics — Determination of ash — Part 4: Polyamides,Plastiques — Détermination du taux de cendres — Partie 4: Polyamides,1986-08-28,1,['83.080.20'],ISO/TC 61/SC 5,9599,,[27078],"['en','fr']",2,

27078,IS,,ISO 3451-4:1998,Plastics — Determination of ash — Part 4: Polyamides,Plastiques — Détermination du taux de cendres — Partie 4: Polyamides,1998-12-20,2,['83.080.20'],ISO/TC 61/SC 5,9599,[8785],"[85978,39708,61922]","['en','fr']",5,

8786,IS,,ISO 3451-5:1989,Plastics — Determination of ash — Part 5: Poly(vinyl chloride),Plastiques — Détermination du taux de cendres — Partie 5: Poly(chlorure de vinyle),1989-09-07,1,['83.080.20'],ISO/TC 61/SC 5,9599,[5871],[29805],"['en','fr']",2,"<p>Specifies two methods for the determination of the ash of poly(vinylchloride): method A: direct calcination at 850 grade Celsius until constant mass is reached, and method B sulfated ash with sulfuric acid treatment after combustion and final heating of the residue until constant mass is reached. Method B is recommended if lead compounds are present. The general procedures given in ISO 34511 shall be followed.</p>"

29805,IS,,ISO 3451-5:2002,Plastics — Determination of ash — Part 5: Poly(vinyl chloride),Plastiques — Détermination du taux de cendres — Partie 5: Poly(chlorure de vinyle),2002-08-22,2,['83.080.20'],ISO/TC 61/SC 5,9599,[8786],"[61923,39708,85979]","['en','fr']",5,"<p>This part of ISO 3451 specifies three methods for the determination of the ash of poly(vinyl chloride). The general procedures given in ISO 3451-1 are followed. For ash, method A is used. For sulfated ash, methods B and C are used. All three methods are applicable to resins, compounds and finished products. Methods B and C are applicable when lead-containing compounds are present.</p>"

45514,IS,,ISO 3452-1:2008,Non-destructive testing — Penetrant testing — Part 1: General principles,Essais non destructifs — Examen par ressuage — Partie 1: Principes généraux,2008-08-28,1,['19.100'],ISO/TC 135/SC 2,9599,[8787],[56130],"['en','fr','ru']",9,"<p>ISO 3452-1:2008 defines a method of penetrant testing used to detect discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested. It is mainly applied to metallic materials, but can also be performed on other materials, provided that they are inert to the test media and they are not excessively porous, examples of which are castings, forgings, welds, ceramics, etc.</

56130,IS,,ISO 3452-1:2013,Non-destructive testing — Penetrant testing — Part 1: General principles,Essais non destructifs — Examen par ressuage — Partie 1: Principes généraux,2013-05-27,2,['19.100'],ISO/TC 135/SC 2,9599,[45514],[75696],"['en','fr']",22,"<p>ISO 3452-1:2013 specifies a method of penetrant testing used to detect discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested. It is mainly applied to metallic materials, but can also be performed on other materials, provided that they are inert to the test media and not excessively porous (castings, forgings, welds, ceramics, etc.)</p><p>It also includes requireme

8787,IS,,ISO 3452:1984,Non-destructive testing — Penetrant inspection — General principles,Essais non destructifs — Contrôle par ressuage — Principes généraux,1984-09-01,1,['19.100'],ISO/TC 135/SC 2,9599,[9485],"[45514,2159]","['en','fr']",9,"<p>Applies to penetrant inspection on materials and components both during manufacture and in service. Does not deal with levels of acceptance or rejection. Penetrant inspection is used to locate laps, folds, cracks, porosity and fissures, which are open to the surface of a material or component. It can be used with materials irrespective of their physical properties.</p>"

32319,IS,,ISO 3452-2:2000,Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials,Essais non destructifs — Examen par ressuage — Partie 2: Essais des produits de ressuage,2000-04-06,1,['19.100'],ISO/TC 135/SC 2,9599,,"[2175,40533]","['en','fr']",28,

40533,IS,,ISO 3452-2:2006,Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials,Essais non destructifs — Examen par ressuage — Partie 2: Essai des produits de ressuage,2006-08-18,2,['19.100'],ISO/TC 135/SC 2,9599,[32319],[59658],"['en','fr']",32,<p>SO 3452-2:2006 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. It also details on-site control tests and methods.</p>

59658,IS,,ISO 3452-2:2013,Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials,Essais non destructifs — Examen par ressuage — Partie 2: Essai des produits de ressuage,2013-11-07,3,['19.100'],ISO/TC 135/SC 2,9599,[40533],[75697],"['en','fr']",24,<p>ISO 3452-2:2013 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. ISO 3452-2:2013 covers the temperature range 10 °C to 50 °C. Additional tests in ISO 3452-5:2008 or ISO 3452-6:2008 may be required outside this range.</p><p>On-site control tests and methods are detailed in ISO 3452‑1:2013.</p>

27714,IS,,ISO 3452-3:1998,Non-destructive testing — Penetrant testing — Part 3: Reference test blocks,Essais non destructifs — Examen par ressuage — Partie 3: Pièces de référence,1998-12-20,1,['19.100'],ISO/TC 135/SC 2,9599,,[59659],"['en','fr']",7,

34968,IS,Cor,ISO 3452-3:1998/Cor 1:2001,Non-destructive testing — Penetrant testing — Part 3: Reference test blocks — Technical Corrigendum 1: .,Essais non destructifs — Examen par ressuage — Partie 3: Pièces de référence — Rectificatif technique 1: .,2001-02-01,1,['19.100'],ISO/TC 135/SC 2,9599,,[59659],['fr'],,

8789,IS,,ISO 3454:1983,Liquid flow measurement in open channels — Direct depth sounding and suspension equipment,Mesure de débit des liquides dans les canaux découverts — Matériel de sondage et de suspension pour le mesurage direct de la profondeur,1983-08-01,2,['17.120.20'],ISO/TC 113/SC 5,9599,,[41072],"['en','fr']",4,"<p>Specifies functional requirements of sounding and suspension equipment used in the direct measurement of depht and velocity of flow in open channels, including the collection of sediment samples. Does not apply to indirect methods such as echo sounding. This second edition cancels and replaces the first edition (1975).</p>"

8790,IS,,ISO 3455:1976,Liquid flow measurement in open channels — Calibration of rotating-element current-meters in straight open tanks,Mesure de débit des liquides dans les canaux découverts — Étalonnage des moulinets à élément rotatif en bassins découverts rectilignes,1976-02-01,1,['17.120.20'],ISO/TC 113/SC 5,9599,,[37099],"['en','fr']",8,"<p>Specifies the procedure to be used for the calibration of current-meters, i.e. for the experimental determination of the relationship between liquid velocity and rate of revolution of the rotating element. Specifies also the type of tank and equipment to be used and the method of presenting the results.</p>"

37099,IS,,ISO 3455:2007,Hydrometry — Calibration of current-meters in straight open tanks,Hydrométrie — Étalonnage des moulinets en bassins découverts rectilignes,2007-05-18,2,['17.120.20'],ISO/TC 113/SC 5,9599,[8790],[72298],['en'],15,"<p>ISO 3455:2007 specifies the procedure of calibration of current-meters of rotating-element type as well as stationary-sensor type (electromagnetic type) in straight open tanks. It also specifies the types of tank, rating carriage and equipment to be used and the method of presenting the results.</p><p>The procedure does not take into account any possible difference existing between the behaviour of a current-meter moving in motionless water and that of a f

8792,IS,,ISO 3457:1979,Earth-moving machinery — Guards and shields — Definitions and specifications,Engins de terrassement — Tôles et plaques — Définitions et spécifications,1979-09-01,2,['53.100'],ISO/TC 127/SC 2,9599,,[8793],"['en','fr']",5,

8793,IS,,ISO 3457:1986,Earth-moving machinery — Guards and shields — Definitions and specifications,Engins de terrassement — Tôles et plaques — Définitions et spécifications,1986-06-19,3,['53.100'],ISO/TC 127/SC 2,9599,[8792],"[32429,8794]","['en','fr']",5,"<p>Specifies the characteristics of different guards and shields to protect personnel from accidental hazards which may arise during operation and servicing of earth-moving machines due to mechanical, thermal, chemical and electrical causes. Covers both rubber-tyred and track-type off-highway earth-moving machinery of all sizes.</p>"

8795,IS,,ISO 3458:1976,Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure,Assemblages entre raccords et tubes sous pression en polyéthylène (PE) — Essai d'étanchéité à la pression intérieure,1976-06-01,1,['23.040.60'],ISO/TC 138/SC 2,9599,,[61257],"['en','fr']",2,"<p>Specification of test method and requirements for leakproofness of assembled joints between fittings and polyethylene-(PE-) pipes, when submitted to an internal hydraulic pressure three times the nominal pressure rating of the pipe.</p>"

8796,IS,,ISO 3459:1976,Polyethylene (PE) pressure pipes — Joints assembled with mechanical fittings — Internal under-pressure test method and requirement,Tubes sous pression en polyéthylène (PE) — Assemblages avec raccords mécaniques — Essai d'étanchéité à la dépression intérieure et caractéristiques requises,1976-10-01,1,['23.040.60'],ISO/TC 138/SC 2,9599,,[61258],"['en','fr']",2,"<p>Specification of the test method and apparatures for checking the leakproofness of assembled joints, when the external pressure is greater than the pressure within the pipe. The test shall be carried out at two levels of difference between external and internal pressures (0,01 and 0,08 MPa).</p>"

61258,IS,,ISO 3459:2015,Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure,Systèmes de canalisations en matières plastiques — Assemblages mécaniques entre raccords et tubes sous pression — Méthode d'essai pour l'étanchéité sous pression négative,2015-02-26,2,['23.040.60'],ISO/TC 138/SC 5,9599,[8796],[82022],"['en','fr']",6,<p>ISO 3459:2015 specifies two methods of testing for checking the leaktightness of assembled joints between mechanical fittings and plastic pressure pipes up to and including 63 mm. The test applies regardless of the design and material of the fitting used for jointing plastics pipe.</p><p

8797,IS,,ISO 3460:1975,Unplasticized polyvinyl chloride (PVC) pressures pipes — Metric series — Dimensions of adapter for backing flange,Tubes sous pression en polychlorure de vinyle (PVC) non plastifié — Série métrique — Dimensions du collet pour la bride libre,1975-12-01,1,['23.040.60'],ISO/TC 138/SC 2,9599,,[50363],"['en','fr']",2,<p>The main dimensions of adapters for solvent (cold) welding and the inside diameters of backing flanges for PVC-pressure pipes are specified. Applicable to pipe sizes from 16 to 160 mm (outside diameter) and for nominal pressure of 1 MPa.</p>

8801,IS,,ISO 3461-1:1988,General principles for the creation of graphical symbols — Part 1: Graphical symbols for use on equipment,Principes généraux pour la création de symboles graphiques — Partie 1: Symboles graphiques utilisables sur le matériel,1988-06-23,1,['01.080.01'],ISO/TC 145,9599,[8800],"[23666,33083]","['en','fr']",6,"<p>Contains rules for designing symbols, including their shape and size, and instructions for their application. Does not apply to graphical symbols primarily intended for - use on drawings; - use in technical product documentation; - public information.</p>"

8800,IS,,ISO 3461:1976,Graphic symbols — General principles for presentation,Symboles graphiques — Principes généraux pour la présentation,1976-03-01,1,['01.080.01'],ISO/TC 145,9599,,[8801],"['en','fr']",7,

8802,IS,,ISO 3461-2:1987,General principles for the creation of graphical symbols — Part 2: Graphical symbols for use in technical product documentation,Principes généraux pour la création de symboles graphiques — Partie 2: Symboles graphiques à utiliser dans la documentation technique de produits,1987-11-12,1,['01.080.01'],ISO/TC 145,9599,,[8803],"['en','fr']",4,

8807,IS,,ISO 3463:1984,Agricultural and forestry wheeled tractors — Protective structures — Dynamic test method and acceptance conditions,Tracteurs agricoles et forestiers à roues — Structures de protection — Méthode d'essais dynamiques et conditions d'acceptation,1984-05-01,2,"['65.060.80','65.060.10']",ISO/TC 23/SC 3,9599,,[8808],"['en','fr']",17,

8808,IS,,ISO 3463:1989,Wheeled tractors for agriculture and forestry — Protective structures — Dynamic test method and acceptance conditions,Tracteurs agricoles et forestiers à roues — Structures de protection — Méthode d'essais dynamiques et conditions d'acceptation,1989-10-05,3,"['65.060.80','65.060.10']",ISO/TC 23/SC 3,9599,[8807],[37973],"['en','fr']",18,"<p>This third edition cancels and replaces the second edition (1984). Specifies a test method and the acceptance conditions for protective structures of tractors. Applies to tractors having at least two axles foe pneumatic-tyred, with or without track attachments, and with a basic mass of 800 to 6000 kg. The minimum track width of rear

26864,IS,Amd,ISO 3463:1989/Amd 1:1998,Wheeled tractors for agriculture and forestry — Protective structures — Dynamic test method and acceptance conditions — Amendment 1,Tracteurs agricoles et forestiers à roues — Structures de protection — Méthode d'essais dynamiques et conditions d'acceptation — Amendement 1,1998-12-03,3,"['65.060.80','65.060.10']",ISO/TC 23/SC 3,9599,,[37973],"['en','fr']",1,

8811,IS,,ISO 3466:1975,Machine taper pin reamers with parallel shanks,"Alésoirs à machine pour trous de goupilles coniques, à queue cylindrique",1975-08-01,1,['25.100.30'],ISO/TC 29/SC 9,9599,,"[54317,68792]","['en','fr']",2,"<p>Lays down only metric dimensions, which are the only recommended dimensions in the future for these types of reamers. The reamers have been designed to produce holes for taper pins manufactured to ISO 2339 in the range 2 to 12 mm nominal diameter. Unless otherwise stated, these tools will be rigth-hand cutting. The flutes may be straigth or spiral at the option of the manufacturer.</p>"

8812,IS,,ISO 3467:1975,Machine taper pin reamers with Morse taper shanks,"Alésoirs à machine pour trous de goupilles coniques, à queue cône Morse",1975-08-01,1,['25.100.30'],ISO/TC 29/SC 9,9599,,"[68793,54318]","['en','fr']",2,"<p>Lays down only metric dimensions, which are the only recommended dimensions in the future for these types of reamers. The reamers have been designed to produce holes for taper pins manufactured to ISO 2339 in the range 5 to 50 mm nominal diameter. Unless otherwise stated, these tools will be rigth-hand cutting. The flutes may be straigth or spiral at the option of the manufacturer.</p>"

8813,IS,,ISO 3468:1976,Road vehicles — Windscreen defrosting systems for passenger cars — Test method,Véhicules routiers — Dispositif de dégivrage du pare-brise de voiture particulière — Méthode d'essai,1976-05-01,1,['43.040.65'],ISO/TC 22,9599,,[8814],"['en','fr']",2,

8814,IS,,ISO 3468:1989,Passenger cars — Windscreen defrosting systems — Test method,Voitures particulières — Dispositif de dégivrage du pare-brise — Méthode d'essai,1989-12-21,2,['43.040.65'],ISO/TC 22,9599,[8813],[56701],"['en','fr']",5,<p>Specifies the test procedure for systems when these are fitted. Does not specify reference areas or levels of performance. The annexes A and B are for information only. This second edition cancels and replaces the first edition (1976).</p>

8815,IS,,ISO 3469:1975,Road vehicles — Windscreen washer systems for passenger cars — Test methods,Véhicules routiers — Dispositif de lave-glace pour pare-brise de voiture particulière — Méthodes d'essai,1975-12-01,1,['43.040.65'],ISO/TC 22,9599,,[8816],"['en','fr']",3,

8817,IS,,ISO 3470:1976,Road vehicles — Windscreen demisting equipment for passenger cars — Test method,Véhicules routiers — Dispositif de désembuage du pare-brise de voiture particulière — Méthode d'essai,1976-05-01,1,['43.040.65'],ISO/TC 22,9599,,[8818],"['en','fr']",2,

8818,IS,,ISO 3470:1989,Passenger cars — Windscreen demisting systems — Test method,Voitures particulières — Dispositif de désembuage du pare-brise — Méthode d'essai,1989-12-14,2,['43.040.65'],ISO/TC 22,9599,[8817],[56701],"['en','fr']",4,<p>Specifies the test procedure for systems when these are fitted; Does not specify reference areas or levels of performance; The annex A is for information only. This second edition cancels and replaces the first edition (1976).</p>

8821,IS,,ISO 3471-1:1986,"Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements — Part 1: Crawler, wheel loaders and tractors, backhoe loaders, graders, tractor scrapers, articulated steer dumpers","Engins de terrassement — Structures de protection au retournement — Essais de laboratoire et critères de performance — Partie 1: Chargeuses et tracteurs sur chenilles et sur roues, chargeuses-pelleteuses, niveleuses, décapeuses et tombereaux avec avant-train",1986-06-26,1,['53.100'],ISO/TC 127/SC 2,9599,[8819],[8820],"['en','fr']",15,

8819,IS,,ISO 3471:1980,Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements,Engins de terrassement — Structures de protection au retournement — Essais de laboratoire et critères de performance,1980-09-01,2,['53.100'],ISO/TC 127/SC 2,9599,,[8821],"['en','fr']",15,

8820,IS,,ISO 3471:1994,Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements,Engins de terrassement — Structures de protection au retournement — Essais de laboratoire et critères de performance,1994-02-03,3,['53.100'],ISO/TC 127/SC 2,9599,[8821],[38084],"['en','fr']",21,"<p>Establishes a consistent and reproducible means of evaluating the load-carrying characteristics of roll-over protective structures under static loading, and prescribes performance requirements for a representative specimen under such loading. Applies to the following seated design operator-controlled machines as defined in ISO 6165: crawler tractors and loaders, graders,

26818,IS,Amd,ISO 3471:1994/Amd 1:1997,Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements — Amendment 1: Laboratory tests and performance requirements,Engins de terrassement — Structures de protection au retournement — Essais de laboratoire et critères de performance — Amendement 1: Essais de laboratoire et critères de performance,1997-09-25,3,['53.100'],ISO/TC 127/SC 2,9599,,[38084],"['en','fr']",1,

34722,IS,Cor,ISO 3471:1994/Cor 1:2000,Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements — Technical Corrigendum 1,Engins de terrassement — Structures de protection au retournement — Essais de laboratoire et critères de performance — Rectificatif technique 1,2000-11-30,3,['53.100'],ISO/TC 127/SC 2,9599,,[38084],"['en','fr']",2,

8827,IS,,ISO 3475:1975,Oil of aniseed,Huile essentielle d'anis vert,1975-12-01,1,['71.100.60'],ISO/TC 54,9599,,"[8828,32039]","['en','fr']",2,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear liquid or crystalline mass. Colour: Colourless to pale yellow, when liquid. Odour: Characteristic, recalling than of anethole. Relative density at 20/20 °C: 0,980 - 0,990. Refractive index at 20 °C: 1,5520 - 1,5590. Optical rotation at 20 °C: Range from - 2 to + 2 . Solubility in 90 % (V/V) ethanol at 20 °C: 1 volume in 3 volumes. Freezing point: 15 - 19,5 C.</p>"

32039,IS,,ISO 3475:2002,Oil of aniseed (Pimpinella anisum L.),Huile essentielle d'anis vert (Pimpinella anisum L.),2002-10-03,2,"['71.100.60','65.020.20','67.200.20']",ISO/TC 54,9599,[8827],[75580],"['en','fr']",6,"<p>ISO 3475:2002 specifies certain characteristics of the oil of aniseed (<i>Pimpinella anisum</i> L.), in order to facilitate assessment of its quality.</p>"

8831,IS,,ISO 3478:1975,Polypropylene (PP) pipes — Determination of longitudinal reversion,Tubes en polypropylène (PP) — Détermination du retrait à chaud longitudinal,1975-12-01,1,['23.040.20'],ISO/TC 138,9599,,"[7435,7436]","['en','fr']",2,

4300,IS,,ISO 349:1975,Hard coal — Audibert-Arnu dilatometer test,Houille — Essai au dilatomètre Audibert-Arnu,1975-01-01,1,['73.040'],ISO/TC 27/SC 5,9599,,[71376],"['en','fr']",11,<p>Specifies a method for determining the swelling properties of hard coal when heated under standard conditions in a dilatometer. In performing the method a pencil made of powdered coal formed under pressure is inserted into a precisely calibrated narrow tube and topped by a calibrated steel rod which slides in the bore of the tube. The whole is heated at a constant and definite rate. By making regular readings of the displacement of the rod as a function of the temperature and expressing the displacements observe

8843,IS,,ISO 3493:1976,Vanilla — Vocabulary,Vanille — Vocabulaire,1976-04-01,1,"['67.220.10','01.040.67']",ISO/TC 34/SC 7,9599,,[8844],"['en','fr']",2,

8844,IS,,ISO 3493:1999,Vanilla — Vocabulary,Vanille — Vocabulaire,1999-09-09,2,"['67.220.10','01.040.67']",ISO/TC 34/SC 7,9599,[8843],[64798],"['en','fr']",7,

8846,IS,,ISO 3495:1975,Dried milk — Determination of lactic acid and lactates content,Lait sec — Détermination de la teneur en acide lactique et en lactates,1975-10-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[15090],"['en','fr']",3,

8847,IS,,ISO 3496:1978,Meat and meat products — Determination of L(-)- hydroxyproline content (Reference method),Viande et produits à base de viande — Détermination de la teneur en L(-)-hydroxyproline (Méthode de référence),1978-07-01,1,['67.120.10'],ISO/TC 34/SC 6,9599,,[8848],"['en','fr']",3,

8849,IS,,ISO 3497:1976,Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods,Revêtements métalliques — Mesurage de l'épaisseur — Méthodes par spectrométrie de rayons X,1976-02-01,1,['25.220.40'],ISO/TC 107,9599,,[8850],"['en','fr']",7,

8850,IS,,ISO 3497:1990,Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods,Revêtements métalliques — Mesurage de l'épaisseur — Méthodes par spectrométrie de rayons X,1990-11-08,2,['25.220.40'],ISO/TC 107,9599,[8849],[20319],"['en','fr']",11,

3663,IS,,ISO 35:1982,"Rubber latex, natural — Determination of mechanical stability",Latex de caoutchouc — Détermination de la stabilité mécanique,1982-04-01,2,['83.040.10'],ISO/TC 45,9599,,[3664],"['en','fr']",2,

3664,IS,,ISO 35:1989,Natural rubber latex concentrate — Determination of mechanical stability,Latex de caoutchouc naturel concentré — Détermination de la stabilité mécanique,1989-09-21,3,['83.040.10'],ISO/TC 45/SC 3,9599,[3663],[25529],"['en','fr']",3,

25529,IS,,ISO 35:1995,"Latex rubber, natural, concentrate — Determination of mechanical stability",Latex de caoutchouc naturel concentré — Détermination de la stabilité mécanique,1995-10-12,4,['83.040.10'],ISO/TC 45/SC 3,9599,[3664],[35175],"['en','fr']",3,"<p>Gives a method for the determination of the mechanical stability of natural rubber latex concentrate. It is also applicable to prevulcanized natural rubber latex concentrate. Not applicable to synthetic rubber latices. Replaces the third edition, of which it constitutes a minor revision.</p>"

8854,IS,,ISO 3500:1976,Seamless steel CO2 cylinders for fixed fire-fighting installations on ships,"Bouteilles à CO2 en acier, sans soudure, pour installations fixes de lutte contre l'incendie à bord des navires",1976-10-01,1,"['13.220.10','47.020.99']",ISO/TC 58,9599,,[8855],"['en','fr']",2,

8855,IS,,ISO 3500:1990,Seamless steel CO2 cylinders for fixed fire-fighting installations on ships,"Bouteilles à CO2 en acier, sans soudure, pour installations fixes de lutte contre l'incendie à bord des navires",1990-11-01,2,"['13.220.10','47.020.99']",ISO/TC 58/SC 3,9599,[8854],[35829],"['en','fr']",2,"<p>Specifies the principal external dimensions, accessories, filling ratio and marking for seamless steel cylinders, in order to facilitate their interchangeability. This second edition cancels and replaces the first edition (1976).</p>"

8856,IS,,ISO 3501:1976,Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of resistance to pull out,Assemblages entre raccords et tubes sous pression en polyéthylène (PE) — Essai de résistance à l'arrachement,1976-06-01,1,['23.040.60'],ISO/TC 138/SC 2,9599,,[61259],"['en','fr']",2,"<p>Specifies a method for checking the ability of assembled pipe-fitting-joints to withstand longitudinal tensile stresses. The test is carried out with a force, which produces 1,5 times the maximum permissible working stress of pipe material.</p>"

61259,IS,,ISO 3501:2015,Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force,Systèmes de canalisations en plastique — Assemblages mécaniques entre raccords et tubes sous pression — Méthode d'essai de résistance à l'arrachement sous une force longitudinale constante,2015-03-02,2,['23.040.60'],ISO/TC 138/SC 5,9599,[8856],[82023],"['en','fr']",5,<p>ISO 3501:2015 specifies a method for checking the ability of assembled uniaxial joints between fittings and plastic pressure pipes to withstand longitudinal tensile stresses. The test applies regardless of the design and material of the fitting used

8858,IS,,ISO 3503:1976,Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure when subjected to bending,Assemblages entre raccords et tubes sous pression en polyéthylène (PE) — Essai d'étanchéité à la pression intérieure lorsqu'ils sont soumis à une courbure,1976-06-01,1,['23.040.60'],ISO/TC 138/SC 2,9599,,[61260],"['en','fr']",2,"<p>Specification of a method and a test assembly for checking the leakproofness of an assembly with one pipe and two connected end fittings, to which bending is applied according to its free length. This bending has an average radius calculated from the pipe nominal diameter and pressure. The test spec

8862,IS,,ISO 3506-1:1997,"Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs",Caractéristiques mécaniques des éléments de fixation en acier inoxydable résistant à la corrosion — Partie 1: Vis et goujons,1997-11-20,1,['21.060.10'],ISO/TC 2,9599,[8861],[46229],"['en','fr']",21,

46229,IS,,ISO 3506-1:2009,"Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs",Caractéristiques mécaniques des éléments de fixation en acier inoxydable résistant à la corrosion — Partie 1: Vis et goujons,2009-10-29,2,['21.060.10'],ISO/TC 2,9599,[8862],"[61794,70045]","['en','fr']",27,"<p>ISO 3506-1:2009 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 °C to 35 °C. Properties vary at higher or lower temperatures.</p><p>ISO 3506-1:2009 applies to bolts, screws and studs</p><p>-

8861,IS,,ISO 3506:1979,Corrosion-resistant stainless steel fasteners — Specifications,Éléments de fixation en acier inoxydable résistant à la corrosion — Spécifications,1979-05-01,1,['21.060.01'],ISO/TC 2,9599,,"[8864,8862,8863]","['en','fr']",14,

8863,IS,,ISO 3506-2:1997,Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2: Nuts,Caractéristiques mécaniques des éléments de fixation en acier inoxydable résistant à la corrosion — Partie 2: Écrous,1997-11-20,1,['21.060.20'],ISO/TC 2,9599,[8861],[46230],"['en','fr']",15,

46230,IS,,ISO 3506-2:2009,Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts,Caractéristiques mécaniques des éléments de fixation en acier inoxydable résistant à la corrosion — Partie 2: Écrous,2009-10-29,2,['21.060.20'],ISO/TC 2,9599,[8863],"[61795,70046]","['en','fr']",21,"<p>ISO 3506-2:2009 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 °C to 35 °C. Properties vary at higher or lower temperatures.</p><p>ISO 3506-2:2009 applies to nuts:</p><p>- with nominal thread diameter <i>d</i> ≤ 39 mm;</p><p>- of triangul

8864,IS,,ISO 3506-3:1997,Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress,Caractéristiques mécaniques des éléments de fixation en acier inoxydable résistant à la corrosion — Partie 3: Vis sans tête et éléments de fixation similaires non soumis à des contraintes de traction,1997-11-20,1,['21.060.10'],ISO/TC 2,9599,[8861],[46231],"['en','fr']",13,

46231,IS,,ISO 3506-3:2009,Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress,Caractéristiques mécaniques des éléments de fixation en acier inoxydable résistant à la corrosion — Partie 3: Vis sans tête et éléments de fixation similaires non soumis à des contraintes de traction,2009-10-29,2,['21.060.10'],ISO/TC 2,9599,[8864],"[84037,77707]","['en','fr']",17,"<p>ISO 3506-3:2009 specifies the mechanical properties of set screws and similar fasteners not under tensile stress made of austenitic stainless steel, when tested over an ambient temperature range of 10 °C to 35 °C. Properties vary at higher or lower t

29192,IS,,ISO 3506-4:2003,Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 4: Tapping screws,Caractéristiques mécaniques des éléments de fixation en acier inoxydable résistant à la corrosion — Partie 4: Vis à tôle,2003-04-14,1,['21.060.10'],ISO/TC 2,9599,,[46232],"['en','fr']",17,"<p>ISO 3506-4 specifies the mechanical properties of tapping screws made from austenitic, martensitic and ferritic grades of corrosion-resistant stainless steels when tested at an ambient temperature range of 15 °C to 25 °C. Properties vary between higher and lower temperatures.</p><p>It applies to tapping screws with threads from ST2,2 up to and including ST8 in accordance with ISO 147

46232,IS,,ISO 3506-4:2009,Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws,Caractéristiques mécaniques des éléments de fixation en acier inoxydable résistant à la corrosion — Partie 4: Vis à tôle,2009-10-29,2,['21.060.10'],ISO/TC 2,9599,[29192],"[77708,84038]","['en','fr']",17,"<p>ISO 3506-4:2009 specifies the mechanical properties of tapping screws made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 °C to 35 °C. Properties vary at higher or lower temperatures.</p><p>It applies to tapping screws with threads from ST2,2 up to and including ST8, in a

8865,IS,,ISO 3507:1976,Pyknometers,Pycnomètres,1976-10-01,1,['17.060'],ISO/TC 48,9599,,[29699],"['en','fr']",8,

8867,IS,,ISO 3509:1984,Coffee and its products — Vocabulary,Cafés et dérivés — Vocabulaire,1984-06-01,2,"['67.140.20','01.040.67']",ISO/TC 34/SC 15,9599,,[8868],"['en','fr']",11,

8868,IS,,ISO 3509:1989,Coffee and its products — Vocabulary,Cafés et dérivés — Vocabulaire,1989-06-22,3,"['67.140.20','01.040.67']",ISO/TC 34/SC 15,9599,[8867],"[24921,34184]","['en','fr']",12,"<p>Definitions of the most commonly used terms in English and French. The terms are grouped to the clauses 'coffee', ' green coffee', 'roasted coffee' and 'process descriptions'. Alphabetical indices in the two languages are added.</p>"

4302,IS,,ISO 351:1975,Coal and coke — Determination of total sulphur — High temperature combustion method,Charbon et coke — Dosage du soufre total — Méthode par combustion à haute température,1975-01-01,1,"['73.040','75.160.10']",ISO/TC 27,9599,,[4303],"['en','fr']",4,

4303,IS,,ISO 351:1984,Solid mineral fuels — Determination of total sulfur — High temperature combustion method,Combustibles minéraux solides — Dosage du soufre total — Méthode par combustion à haute température,1984-10-01,2,['75.160.10'],ISO/TC 27/SC 5,9599,[4302],[4304],"['en','fr']",4,

8869,IS,,ISO 3511-1:1977,Process measurement control functions and instrumentation — Symbolic representation — Part 1: Basic requirements,Fonctions et instrumentation pour la mesure et la régulation des processus industriels — Représentation symbolique — Partie 1: Principes de base,1977-07-01,1,"['25.040.40','01.080.30']",ISO/TC 10/SC 10,9599,,"[8870,83364]","['en','fr']",10,"<p>Forms one part of four which provide a universal means of communication between the various interests involved in the design, manufacture, installation and operation of measurement and control equipment used in the process industries. This part establishes a symbols system for use in depicting the basic functions. Th

8871,IS,,ISO 3511-2:1984,Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements,Fonctions et instrumentation pour la mesure et la régulation des processus industriels — Représentation symbolique — Partie 2: Extension des principes de base,1984-06-01,1,"['25.040.40','01.080.30']",ISO/TC 10/SC 10,9599,,"[8872,83364]","['en','fr']",8,"<p>Forms and extension of part 1 which is limited to identification of instrument functions. Includes additional symbols and is intended for the communication of measurement and control fuctions among instrument specialists and other engineers involved in vessels, piping, layout design and oper

8873,IS,,ISO 3511-3:1984,Process measurement control functions and instrumentation — Symbolic representation — Part 3: Detailed symbols for instrument interconnection diagrams,Fonctions et instrumentation pour la mesure et la régulation des processus industriels — Représentation symbolique — Partie 3: Symboles détaillés pour les diagrammes d'interconnexion d'instruments,1984-06-01,1,"['25.040.40','01.080.30']",ISO/TC 10/SC 10,9599,,"[83364,8874]","['en','fr']",19,"<p>Forms one part of four and specifies symbols which show, by detailing the components, the external connections between units of equipment. These symbols are not intended to replace the graphic symbols contained in IEC Publicatio

8875,IS,,ISO 3511-4:1985,"Industrial process measurement control functions and instrumentation — Symbolic representation — Part 4: Basic symbols for process computer, interface, and shared display/control functions","Fonctions de régulation, de mesure et d'automatisme des processus industriels — Représentation symbolique — Partie 4: Symboles de base pour la représentation des fonctions calculateur",1985-08-22,1,"['25.040.40','01.080.30']",ISO/TC 10/SC 10,9599,,"[8876,83364]","['en','fr']",8,"<p>The symbols in this part shall be considered a supplement to the symbols given in ISO 3511/1 and ISO 3511/2 and used in conjunction with them. The letter code for function identification shall be take

8877,IS,,ISO 3512:1976,Heavy duty cranked link transmission chains,Chaînes de transmission à maillons coudés de haute résistance,1976-02-01,1,['21.220.30'],ISO/TC 100,9599,,[8878],"['en','fr']",7,

8879,IS,,ISO 3513:1977,Spices and condiments — Chillies — Determination of Scoville index,Épices — Piment enragé (piment dit 'de Cayenne') — Détermination de l'indice Scoville,1977-01-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[8880],"['en','fr']",2,

8882,IS,,ISO 3515:1976,Oil of French lavender,Huile essentielle de lavande de France,1976-12-01,1,['71.100.60'],ISO/TC 54,9599,,[8883],"['en','fr']",2,

8883,IS,,ISO 3515:1987,Oil of French lavender (Lavandula angustifolia P. Miller),Huile essentielle de lavande de France (Lavandula angustifolia P. Miller),1987-11-19,2,['71.100.60'],ISO/TC 54,9599,[8882],"[24654,36253]","['en','fr']",4,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear, mobile liquid. Colour: Pale yellow. Odour: Characteristic, rustic and recalling the odour of lavernder flowers. Relative density at 20/20 °C: 0,877 - 0,890. Refractive index at 20 °C: 1,4580 - 1,4640. Optical rotation at 20 °C: Range from - 11 to - 7 . Miscibility in 70 % (V/V) ethanol at 20 °C: 1 volume in not more than 5 volumes. Acid value: Maximum 1,0. Ester value: 108

8884,IS,,ISO 3516:1980,Oil of coriander,Huile essentielle de coriandre,1980-07-01,1,['71.100.60'],ISO/TC 54,9599,,[8885],"['en','fr']",2,

8886,IS,,ISO 3517:1975,Oil of neroli,Huile essentielle de néroli,1975-12-01,1,['71.100.60'],ISO/TC 54,9599,,"[8887,32031]","['en','fr']",2,"<p>The Standard specifies the characteristics of the oil. The oil must be a clear, mobile liquid with a colour of pale yellow to amber with a slight blue fluorescence and a characteristic odour, recalling that of the flowers of the bitter orange tree. The maximum acid value runs up to 2,0. The permissible ranges for the values of relative density at 20/20 °C, refractive index at 20 °C, solubility in diluted ethanol at 20 °C, and ester value differ in accordance with the country of origin (France, Italy, North Africa).</p>"

32031,IS,,ISO 3517:2002,"Oil of neroli (Citrus aurantium L. spp. aurantium, syn. Citrus aurantium L. spp. amara var. pumilia)","Huile essentielle de néroli bigaradier (Huile essentielle de fleurs d'oranger bigaradier) (Citrus aurantium L. spp. aurantium, syn. Citrus aurantium L. spp. amara var. pumilia)",2002-03-28,2,['71.100.60'],ISO/TC 54,9599,[8886],[45645],"['en','fr']",7,"<p>This International Standard specifies certain characteristics of the oil of neroli ( <i>Citrus aurantium </i>L. ssp<i>. aurantium </i>syn<i>. Citrus aurantium</i> L. ssp<i>. amara </i>var<i>. pumilia</i>),<i> </i>cultivated principally in Tunisia and Morocco<i>,</i> with a view to facilitate assessment of its qualit

8888,IS,,ISO 3518:1979,"Oil of sandalwood (Santalum album, Linnaeus)","Huile essentielle de bois de santal (Santalum album, Linnaeus)",1979-07-01,1,['71.100.60'],ISO/TC 54,9599,,"[32037,8889]","['en','fr']",2,"<p>The Standard specifies the following characteristics of the oil. Appearance: Clear, slightly viscous liquid. Colour: Almost colourless to yellow. Odour: Characteristic, sweet, woody, persistent. Relative density at 20/20 °C: 0,968 - 0,983. Refractive index at 20 °C: 1,5030 - 1,5080. Optical rotation at 20 C: Range from - 21 to - 15 . Miscibility with 70 % (V/V) ethanol at 20 °C: 1 : 5. Ester value: Maximum 10. Primary free alcohols content, expressed as santalol: Minimum 90 % (m/m).

32037,IS,,ISO 3518:2002,Oil of sandalwood (Santalum album L.),Huile essentielle de bois de santal (Santalum album L.),2002-03-07,2,['71.100.60'],ISO/TC 54,9599,"[8888,14398]",[77270],"['en','fr']",6,"<p>This International Standard specifies certain characteristics of the oil of sandalwood ( <i>Santalum album </i>L.), in order to facilitate assessment of its quality.</p>"

77270,IS,,ISO 3518:2022,Essential oil of sandalwood (Santalum album L.),Huile essentielle de bois de santal (Santalum album L.),2022-02-15,3,['71.100.60'],ISO/TC 54,9599,[32037],[88588],"['en','fr']",7,"<p>This document specifies certain characteristics of the essential oil of sandalwood (<em>Santalum album</em> L.), in order to facilitate assessment of its quality.</p>"

8890,IS,,ISO 3519:1976,"Oil of lime, obtained by distillation","Huile essentielle de lime, obtenue par distillation",1976-12-01,1,['71.100.60'],ISO/TC 54,9599,,[8891],"['en','fr']",2,

8891,IS,,ISO 3519:1997,"Oil of lime (Citrus aurantifolia (Christm.) Swingle), obtained by distillation","Huile essentielle de lime (Citrus aurantifolia (Christm.) Swingle), obtenue par distillation",1997-07-10,2,['71.100.60'],ISO/TC 54,9599,[8890],[37623],"['en','fr']",5,

8892,IS,,ISO 3520:1980,"Oil of bergamot, Italy","Huile essentielle de bergamote, Italie",1980-07-01,1,['71.100.60'],ISO/TC 54,9599,,[8893],"['en','fr']",2,

8893,IS,,ISO 3520:1998,"Oil of bergamot [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], Italian type","Huile essentielle de bergamote [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], type Italie",1998-10-29,2,['71.100.60'],ISO/TC 54,9599,[8892],[81602],"['en','fr']",6,