Withdrawn and superseded ISO standards — page 103 of 246

24031,IS,,ISO 3376:2002,Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension,Cuir — Essais physiques et mécaniques — Détermination de la résistance à la traction et du pourcentage d'allongement,2002-12-05,2,['59.140.30'],IULTCS,9599,[8667],[51510],"['en','fr']",4,"<p>ISO 3376:2002 specifies a method for determining the tensile strength, elongation at a specified load and elongation at break of leather. It is applicable to all types of leather.</p>"

51510,IS,,ISO 3376:2011,Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension,Cuir — Essais physiques et mécaniques — Détermination de la résistance à la traction et du pourcentage d'allongement,2011-12-05,3,['59.140.30'],IULTCS,9599,[24031],[75173],"['en','fr']",5,"<p>ISO 3376:2011 specifies a method for determining the tensile strength, elongation at a specified load and elongation at break of leather. It is applicable to all types of leather.</p>"

24033,IS,,ISO 3377-1:2002,Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear,Cuir — Essais physiques et mécaniques — Détermination de la force de déchirement — Partie 1: Déchirement d'un seul bord,2002-12-05,1,['59.140.30'],IULTCS,9599,[8668],[51511],"['en','fr']",3,<p>ISO 3377-1:2002 specifies a method for determining the tear strength of leather using a single edged tear. The method is sometimes described as a trouser tear. It is applicable to all types of leather.</p>

8668,IS,,ISO 3377:1975,Leather — Determination of tearing load,Cuir — Détermination de la résistance au déchirement,1975-11-01,1,['59.140.30'],IULTCS,9599,,"[24033,31148]","['en','fr']",2,"<p>Specifies the principle, the used apparatus, the test piece, the procedure and the test report. Two figures show test piece and test piece holders of the tensile strength testing machine. The method is applicable to all types of leather.</p>"

31148,IS,,ISO 3377-2:2002,Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear,Cuir — Essais physiques et mécaniques — Détermination de la force de déchirement — Partie 2: Déchirement des deux bords,2002-12-05,1,['59.140.30'],IULTCS,9599,[8668],[68861],"['en','fr']",3,<p>ISO 3377-2:2002 specifies a method for determining the tear strength of leather using a double-edged tear. The method is sometimes described as the Baumann tear. It is applicable to all types of leather.</p>

68861,IS,,ISO 3377-2:2016,Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear,Cuir — Essais physiques et mécaniques — Détermination de la force de déchirement — Partie 2: Déchirement des deux bords,2016-02-15,2,['59.140.30'],IULTCS,9599,[31148],[89399],"['en','fr']",3,<p>ISO 3377-2:2016 specifies a method for determining the tear strength of leather using a double edged tear. The method is sometimes described as the Baumann tear. It is applicable to all types of leather.</p>

8669,IS,,ISO 3378:1975,"Leather — Determination of resistance to grain cracking, and of crack index",Cuir — Détermination de la résistance de la fleur à la flexion et de l'indice de gerçure,1975-11-01,1,['59.140.30'],IULTCS,9599,,[31149],"['en','fr']",4,"<p>Principle: bending of the leather around a mandrel of known diameter and observation of wether the leather cracks. Specification of apparatus including mandrel diameters, test pieces, procedure including determination of crack index and test report. Figures show the procedure of bending and details of the construction of the test apparatus. The method is applicable particularly to heavy leathers.</p>"

8670,IS,,ISO 3379:1976,Leather — Determination of distension and strength of grain — Ball burst test,Cuir — Détermination de l'extension et de la résistance à la traction de la fleur d'un cuir — Méthode de la bille,1976-02-01,1,['59.140.30'],IULTCS,9599,,[63871],"['en','fr']",3,"<p>The pressure and distention produced by steel ball pressed against a disk of leather are recorded at grain crack and at burst. Specification of used apparatus, test pieces, procedure and test report. The method is intended particularly for use with boot and shoe upper leather, but may also be applied to any light leather.</p>"

63871,IS,,ISO 3379:2015,Leather — Determination of distension and strength of surface (Ball burst method),Cuir — Détermination de l'extension et de la résistance à la traction de la surface (méthode de la bille),2015-08-25,2,['59.140.30'],IULTCS,9599,[8670],[87432],"['en','fr']",5,<p>ISO 3379:2015 specifies a test method for the determination of distension and strength of the leather grain or finished surface. This method is applicable to all flexible leathers and it is particularly suitable to determine the lastability of leathers for footwear uppers.</p>

8671,IS,,ISO 3380:1975,Leather — Determination of shrinkage temperature,Cuir — Détermination de la température de rétraction,1975-12-01,1,['59.140.30'],IULTCS,9599,,[31150],"['en','fr']",3,"<p>The principle consists in slow heating (2 degrees centigrade/min) of a test piece in water and measurement of the temperature at which a sudden shrinkage occurs. Specification of apparatus including requirements for measurement, test pieces, procedure and test report. The method is applicable to any type of leather with a shrinkage temperature below that boiling water.</p>"

31150,IS,,ISO 3380:2002,Leather — Physical and mechanical tests — Determination of shrinkage temperature up to 100 degrees C,Cuir — Essais physiques et mécaniques — Détermination de la température de rétrécissement jusqu'à 100 degrés C,2002-12-05,2,['59.140.30'],IULTCS,9599,[8671],[61792],"['en','fr']",4,<p>ISO 3380:2002 specifies a method for determination of the shrinkage temperature of leather up to 100 °C. It is applicable to all leathers.</p>

8672,IS,,ISO 3381:1976,Acoustics — Measurement of noise inside railbound vehicles,Acoustique — Mesurage du bruit à l'intérieur des véhicules circulant sur rails,1976-02-01,1,"['17.140.30','45.020']",ISO/TC 43,9599,,"[26730,41668]","['en','fr']",4,"<p>Specifies the conditions for obtaining reproducible and comparable measurement results of the noise level and the noise spectrum. The results may be used f. e. for comparison, for characterization of acoustic comfort, for orientation a program of more elaborate measurements for the purposes of studying noise reduction procedures.</p>"

41668,IS,,ISO 3381:2005,Railway applications — Acoustics — Measurement of noise inside railbound vehicles,Applications ferroviaires — Acoustique — Mesurage du bruit à l'intérieur des véhicules circulant sur rails,2005-08-30,2,"['17.140.30','45.020']",ISO/TC 43/SC 1,9599,[8672],[77368],"['en','fr']",18,"<p>ISO 3381:2005 specifies the conditions for obtaining reproducible and comparable measurement results of levels and spectra of noise inside all kinds of vehicles on rails or other types of fixed track, except for track maintenance vehicles in operation.</p><p>It is applicable to type testing and periodic monitoring testing.</p><p>The results may be used, for example, to characterize the nois

8673,IS,,ISO 3382:1975,Acoustics — Measurement of reverberation time in auditoria,Acoustique — Mesurage de la durée de réverbération des auditoriums,1975-12-01,1,['91.120.20'],ISO/TC 43/SC 2,9599,,[2354],"['en','fr']",3,

2354,IS,,ISO 3382:1997,Acoustics — Measurement of the reverberation time of rooms with reference to other acoustical parameters,Acoustique — Mesurage de la durée de réverbération des salles en référence à d'autres paramètres acoustiques,1997-06-26,2,['91.120.20'],ISO/TC 43/SC 2,9599,[8673],"[36200,40979]","['en','fr']",21,

46520,IS,,ISO 3382-3:2012,Acoustics — Measurement of room acoustic parameters — Part 3: Open plan offices,Acoustique — Mesurage des paramètres acoustiques des salles — Partie 3: Bureaux ouverts,2012-01-24,1,['91.120.20'],ISO/TC 43/SC 2,9599,,[77437],"['en','fr']",15,

8674,IS,,ISO 3383:1976,Rubber — General directions for achieving elevated or sub-normal temperatures for tests,Caoutchoucs — Directives générales pour l'obtention de températures élevées ou de températures inférieures à la température normale lors des essais,1976-09-01,1,['83.060'],ISO/TC 45,9599,,[8675],"['en','fr']",4,

8675,IS,,ISO 3383:1985,Rubber — General directions for achieving elevated or subnormal temperatures for test purposes,Caoutchouc — Directives générales pour l'obtention de températures élevées ou de températures inférieures à la température normale lors des essais,1985-12-12,2,['83.060'],ISO/TC 45/SC 2,9599,[8674],"[8676,36888]","['en','fr']",5,"<p>Specifies general principles of the construction and operation of temperature-controlled chambers for conditioning and/or testing. The purpose of conditioning procedures is to ensure that the test piece is substantially at a uniform temperature throughout its mass and in equilibrium with its environment. An annex contains three tables for the cond

53028,IS,,ISO 3384-1:2011,"Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature",Caoutchouc vulcanisé ou thermoplastique — Détermination de la relaxation de contrainte en compression — Partie 1: Essais à température constante,2011-11-23,1,['83.060'],ISO/TC 45/SC 2,9599,[41623],[72787],"['en','fr']",13,"<p>ISO 3384-1-2011 specifies two methods for determining the decrease in counterforce exerted by a test piece of vulcanized or thermoplastic rubber which has been compressed to a constant deformation and maintained thus at a predetermined test temperature. The counterforce can be determined either by means of a contin

61287,IS,Amd,ISO 3384-1:2011/Amd 1:2013,"Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature — Amendment 1: Revised calibration schedule",Caoutchouc vulcanisé ou thermoplastique — Détermination de la relaxation de contrainte en compression — Partie 1: Essais à température constante — Amendement 1: Programme d'étalonnage révisé,2013-03-15,1,['83.060'],ISO/TC 45/SC 2,9599,,[72787],"['en','fr']",3,

72787,IS,,ISO 3384-1:2019,"Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature",Caoutchouc vulcanisé ou thermoplastique — Détermination de la relaxation de contrainte en compression — Partie 1: Essais à température constante,2019-08-14,2,['83.060'],ISO/TC 45/SC 2,9599,"[61287,53028]",[86478],"['en','fr']",14,"<p>This document specifies two procedures for determining the decrease in counterforce exerted by a test piece of vulcanized or thermoplastic rubber which has been compressed to a constant deformation and maintained thus at a predetermined test temperature.</p><p>The counterforce can be determined either by me

8677,IS,,ISO 3384:1979,"Rubber, vulcanized — Determination of stress relaxation in compression at normal and at elevated temperatures",Caoutchoucs vulcanisés — Détermination de la relaxation de contrainte en compression aux températures normales et élevées,1979-11-01,1,['83.060'],ISO/TC 45,9599,,"[8679,8678]","['en','fr']",3,

8678,IS,,ISO 3384:1986,"Rubber, vulcanized — Determination of stress relaxation in compression at ambient and at elevated temperatures",Caoutchouc vulcanisé — Détermination de la relaxation de contrainte en compression à température ambiante et aux températures élevées,1986-10-16,2,['83.060'],ISO/TC 45/SC 2,9599,[8677],[8679],"['en','fr']",4,

8679,IS,,ISO 3384:1991,"Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination de la relaxation de contrainte en compression à température ambiante et aux températures élevées,1991-11-28,3,['83.060'],ISO/TC 45/SC 2,9599,"[8677,12256,8678]",[28767],"['en','fr']",6,

20307,IS,Cor,ISO 3384:1991/Cor 1:1992,"Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures — Technical Corrigendum 1",Caoutchouc vulcanisé ou thermoplastique — Détermination de la relaxation de contrainte en compression à température ambiante et aux températures élevées — Rectificatif technique 1,1992-02-27,3,['83.060'],ISO/TC 45/SC 2,9599,,[28767],"['en','fr']",1,

28767,IS,,ISO 3384:1999,"Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination de la relaxation de contrainte en compression à température ambiante et aux températures élevées,1999-10-07,4,['83.060'],ISO/TC 45/SC 2,9599,"[8679,20307]",[41623],"['en','fr']",7,

33528,IS,Amd,ISO 3384:1999/Amd 1:2001,"Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures — Amendment 1: Precision data",Caoutchouc vulcanisé ou thermoplastique — Détermination de la relaxation de contrainte en compression à température ambiante et aux températures élevées — Amendement 1: Données concernant la fidélité,2001-01-25,4,['83.060'],ISO/TC 45/SC 2,9599,,[41623],"['en','fr']",3,

56503,IS,,ISO 3384-2:2012,"Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling",Caoutchouc vulcanisé ou thermoplastique — Détermination de la relaxation de contrainte en compression — Partie 2: Essais avec cycles de température,2012-11-13,1,['83.060'],ISO/TC 45/SC 2,9599,,[75642],['en'],12,<p>ISO 3384-2:2012 specifies two methods for determining the decrease in counterforce exerted by a test piece of vulcanized or thermoplastic rubber which has been compressed to a constant deformation and then undergoes temperature cycling.</p><p>Method A: The temperature is cycled at intervals between a high temperature for agei

41623,IS,,ISO 3384:2005,"Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination de la relaxation de contrainte en compression à température ambiante et aux températures élevées,2005-09-21,5,['83.060'],ISO/TC 45/SC 2,9599,"[33528,28767]",[53028],"['en','fr']",10,"<p>ISO 3384:2005 specifies two methods for determining the decrease in counterforce exerted by a test piece of vulcanized or thermoplastic rubber which has been compressed to a constant deformation and maintained thus at a predetermined test temperature.</p><p>Two forms of test piece are permitted: cylindr

8680,IS,,ISO 3385:1982,Cellular polymeric flexible materials — Determination of fatigue by constant load pounding,Matériaux polymères alvéolaires souples — Détermination de la fatigue par indentation à charge constante,1982-02-01,2,['83.100'],ISO/TC 45,9599,,[8681],"['en','fr']",4,

8681,IS,,ISO 3385:1989,Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding,Matériaux polymères alvéolaires souples — Détermination de la fatigue par indentation à charge constante,1989-11-02,3,['83.100'],ISO/TC 45/SC 4,9599,[8680],[55743],"['en','fr']",4,<p>Specifies the determination of loss in thickness and loss in hardness of materials intended for use in upholstery. Provides a means of assessing the service performance. The method is applicable both to standard size test pieces cut from stock material and to shaped components. Formulas are given to express the loss in thickness and the loss in hardness. Two figures show the details of a manually adj

8682,IS,,ISO 3386-1:1979,Flexible cellular materials — Determination of compression stress/strain characteristic and compression stress value — Part 1: Low density materials,Matériaux alvéolaires souples — Détermination de la caractéristique de contrainte-déformation relative en compression et de la valeur de la contrainte en compression — Partie 1: Matériaux à basse masse volumique,1979-06-01,1,['83.100'],ISO/TC 45,9599,,[8683],"['en','fr']",2,

8683,IS,,ISO 3386-1:1986,"Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials",Matériaux polymères alvéolaires souples — Détermination de la caractéristique de contrainte-déformation relative en compression — Partie 1: Matériaux à basse masse volumique,1986-06-05,2,['83.100'],ISO/TC 45/SC 4,9599,[8682],[89164],"['en','fr']",3,<p>Covers the determination of material with a density up to 250 kg/m3. It also indicates a method for the calculation of the compression stress value of such materials. The compression stress/strain characteristic is a measure of the load-bearing properties of the material. Two formulas

50768,IS,Amd,ISO 3386-1:1986/Amd 1:2010,"Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials — Amendment 1",Matériaux polymères alvéolaires souples — Détermination de la caractéristique de contrainte-déformation relative en compression — Partie 1: Matériaux à basse masse volumique — Amendement 1,2010-04-09,2,['83.100'],ISO/TC 45/SC 4,9599,,[89164],"['en','fr']",1,

8684,IS,,ISO 3386-2:1984,"Polymeric materials, cellular flexible — Determination of stress-strain characteristic in compression — Part 2: High density materials",Matériaux polymères alvéolaires souples — Détermination de la caractéristique de contrainte-déformation relative en compression — Partie 2: Matériaux à masse volumique élevée,1984-11-01,1,['83.100'],ISO/TC 45,9599,,[25481],"['en','fr']",2,

8685,IS,,ISO 3387:1978,Rubbers — Determination of crystallization effects by hardness measurements,Caoutchoucs — Détermination des effets de la cristallisation au moyen de mesurages de dureté,1978-11-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[8686],"['en','fr']",5,

8686,IS,,ISO 3387:1994,Rubber — Determination of crystallization effects by hardness measurements,Caoutchouc — Détermination des effets de la cristallisation au moyen de mesurages de dureté,1994-05-26,2,['83.060'],ISO/TC 45/SC 2,9599,[8685],[55606],"['en','fr']",6,"<p>Describes a test based on the progressive stiffening of rubber with time, caused by crystallization. It is limited to materials having an initial hardness at test temperature of 10 to 85 IRHD. The method is applicable to raw, unvulcanized (compounded), and vulcanized rubber. It is mainly of interest for rubber with a marked crystallization tendency at temperatures experienced in cold climates, such as, for instance, chloroprene

33662,IS,Cor,ISO 3387:1994/Cor 1:2000,Rubber — Determination of crystallization effects by hardness measurements — Technical Corrigendum 1,Caoutchouc — Détermination des effets de la cristallisation au moyen de mesurages de dureté — Rectificatif technique 1,2000-05-04,2,['83.060'],ISO/TC 45/SC 2,9599,,[55606],"['en','fr']",2,

55606,IS,,ISO 3387:2012,Rubber — Determination of crystallization effects by hardness measurements,Caoutchouc — Détermination des effets de la cristallisation au moyen de mesurages de dureté,2012-07-02,3,['83.060'],ISO/TC 45/SC 2,9599,"[33662,8686]",[74941],"['en','fr']",10,"<p>ISO 3387:2012 specifies a test based on hardness measurements for determining the progressive stiffening of rubber with time, caused by crystallization. It is limited to materials having an initial hardness at a test temperature of from 10 IRHD to 85 IRHD.</p><p>The method is applicable to raw, unvulcanized (compounded) and vulcanized rubber. It is mainly of interest for rubber with a marked crystallization tendency a

8687,IS,,ISO 3388:1977,Patent documents — Bibliographic references — Essential and complementary elements,Documents de brevets — Références bibliographiques — Éléments essentiels et complémentaires,1977-04-01,1,['01.140.30'],ISO/TC 46/SC 9,9599,,[4888],"['en','fr']",29,

8688,IS,,ISO 3389:1975,Aircraft — Radio frequency flexible coaxial cables — Dimensions and electrical characteristics,Aéronautique — Câbles coaxiaux flexibles pour fréquences radioélectriques — Dimensions et caractéristiques électriques,1975-09-01,1,['49.060'],ISO/TC 20/SC 1,9599,,[38142],"['en','fr']",3,"<p>Specifies these quantities for a limited range of cables. Relates to cables in two categories of operational temperature ranges, namely from -40 °C to +85 °C and from -55 °C to +200 °C. An annex is included to list those cables which were in use prior to the publication of this standard. Furthermore describes the construction and manufacture and the designation.</p>"

8693,IS,,ISO 3394:1975,Dimensions of rigid rectangular packages — Transport packages,Dimensions des emballages rectangulaires rigides — Emballages d'expédition,1975-06-01,1,['55.020'],ISO/TC 122,9599,,[8694],['en'],3,

8694,IS,,ISO 3394:1984,Dimensions of rigid rectangular packages — Transport packages,Dimensions des emballages rectangulaires rigides — Emballages d'expédition,1984-08-01,2,['55.020'],ISO/TC 122,9599,[8693],[50990],"['en','fr']",3,<p>The effective outside dimensions (length and width) of transport pacckages shall be obtained by multiplying or dividing the standard plan dimension by an integer. The module standard plan dimension is 600 mm x 400 mm (23.62 in x 15.75 in).</p>

8697,IS,,ISO 3397:1977,Broadleaved wood raw parquet blocks — General characteristics,Frises brutes en bois feuillus pour parquets — Caractéristiques générales,1977-02-01,1,['79.080'],ISO/TC 218,9599,,"[70007,80113]","['en','fr']",4,"<p>Lays down manufacturing characteristics and dimensions, permissible deviations, methods for quality control and delivery conditions, measurement and marking assisted by tables and examples.</p>"

8698,IS,,ISO 3398:1977,Broadleaved wood raw parquet blocks — Classification of oak parquet blocks,Frises brutes en bois feuillus pour parquets — Classement des frises de chêne,1977-02-01,1,['79.080'],ISO/TC 218,9599,,[80115],"['en','fr']",3,"<p>Divides the blocks used for manufacturing different types of parquets by quality into the three grades I, II, and M corresponding to the conditions stated in the tables. Grade M is mainly intended for manufacturing mosaic parquet. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 3397.</p>"

8699,IS,,ISO 3399:1976,Broadleaved wood raw parquet blocks — Classification of beech parquet blocks,Frises brutes en bois feuillus pour parquets — Classement des frises de hêtre,1976-04-01,1,['79.080'],ISO/TC 218,9599,,[80115],"['en','fr']",3,"<p>Divides the blocks by quality into the two grades I and II corresponding to the conditions stated in the tables. Unless otherwise requested, the wood shall be steamed before delivery and the type of sawing may be the subject of special agreements in the orders. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 3397.</p>"

3662,IS,,ISO 34-1:1994,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces","Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au déchirement — Partie 1: Éprouvettes pantalon, angulaire et croissant",1994-02-10,1,['83.060'],ISO/TC 45/SC 2,9599,[3661],[38943],"['en','fr']",11,"<p>Specifies three test methods for the determination of the tear strength of vulcanized rubber: method A, using a trouser test piece; method B, using an angle test piece, with or without a nick of specified depth; method C, using a crescent test piece with a nick. The value of tear strength obtained depends on the shape of the te

31350,IS,Cor,ISO 34-1:1994/Cor 1:1999,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces — Technical Corrigendum 1","Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au déchirement — Partie 1: Éprouvettes pantalon, angulaire et croissant — Rectificatif technique 1",1999-10-21,1,['83.060'],ISO/TC 45/SC 2,9599,,[38943],"['en','fr']",2,

38943,IS,,ISO 34-1:2004,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces","Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au déchirement — Partie 1: Éprouvettes pantalon, angulaire et croissant",2004-03-24,2,['83.060'],ISO/TC 45/SC 2,9599,"[3662,31350]",[50751],"['en','fr']",12,"<p>ISO 34-1:2004 specifies three test methods for the determination of the tear strength of vulcanized rubber, namely</p><ol><li>Method A, using a trouser test piece;</li><li>Method B, using an angle test piece, with or without a nick of specified depth;</li><li>Method C, using a crescent test piece with a nick.</li></ol>

50751,IS,,ISO 34-1:2010,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces","Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au déchirement — Partie 1: Éprouvettes pantalon, angulaire et croissant",2010-09-03,3,['83.060'],ISO/TC 45/SC 2,9599,[38943],[65926],"['en','fr','ru']",13,"<p>ISO 34-1:2010 specifies three test methods for the determination of the tear strength of vulcanized or thermoplastic rubber, namely: method A, using a trouser test piece; method B, using an angle test piece, with or without a nick of specified depth; method C, using a crescent test piece with a nick.</p><p>The value of t

65926,IS,,ISO 34-1:2015,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces","Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au déchirement — Partie 1: Éprouvettes pantalon, angulaire et croissant",2015-06-02,4,['83.060'],ISO/TC 45/SC 2,9599,[50751],[82445],"['en','fr']",15,"<p>ISO 34-1:2015 specifies three test methods for the determination of the tear strength of vulcanized or thermoplastic rubber, namely the following:</p><p>- method A, using a trouser test piece;</p><p>- method B, using an angle test piece, with or without a nick of specified depth;</p><p>- method C, using a cresc

3661,IS,,ISO 34:1979,"Rubber, vulcanized — Determination of tear strength (trouser, angle and crescent test pieces)","Caoutchouc vulcanisé — Détermination de la résistance au déchirement (éprouvettes pantalon, angulaire et croissant)",1979-10-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[3662],"['en','fr']",6,

2194,IS,,ISO 34-2:1996,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au déchirement — Partie 2: Petites éprouvettes (éprouvettes de Delft),1996-12-19,1,['83.060'],ISO/TC 45/SC 2,9599,[5167],[45383],"['en','fr']",11,<p>Describes a method for the determination of the tear strength of small test pieces (Delft test pieces) of vulcanized or thermoplastic rubber. Replaces ISO 816:1993.</p>

45383,IS,,ISO 34-2:2007,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au déchirement — Partie 2: Petites éprouvettes (éprouvettes de Delft),2007-07-11,2,['83.060'],ISO/TC 45/SC 2,9599,[2194],[57719],"['en','fr']",11,"<p>ISO 34-2:2007 specifies a method for the determination of the tear strength of small test pieces (Delft test pieces) of vulcanized or thermoplastic rubber.</p><p>The method does not necessarily give results agreeing with those given by the method described in ISO 34‑1, which uses trouser, angle and crescent test pieces. It is used in preference

57719,IS,,ISO 34-2:2011,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au déchirement — Partie 2: Petites éprouvettes (éprouvettes de Delft),2011-10-28,3,['83.060'],ISO/TC 45/SC 2,9599,[45383],[65927],"['en','fr','ru']",13,

65927,IS,,ISO 34-2:2015,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au déchirement — Partie 2: Petites éprouvettes (éprouvettes de Delft),2015-06-02,4,['83.060'],ISO/TC 45/SC 2,9599,[57719],[82446],"['en','fr']",12,"<p>ISO 34-2:2015 specifies a method for the determination of the tear strength of small test pieces (Delft test pieces) of vulcanized or thermoplastic rubber.</p><p>NOTE The method does not necessarily give results agreeing with those given by the method described in ISO 34‑1, which uses trouser, angle and crescent test pieces. It is use

4287,IS,,ISO 340:1982,Flame retardation of conveyor belts — Specifications and method of test,Résistance des courroies transporteuses à la flamme — Spécifications et méthodes d'essai,1982-12-01,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[4288],"['en','fr']",6,

4288,IS,,ISO 340:1988,Conveyor belts — Flame retardation — Specifications and test method,Courroies transporteuses — Résistance à la flamme — Spécifications et méthode d'essai,1988-06-23,2,['53.040.20'],ISO/TC 41/SC 3,9599,[4287],"[22089,38500]","['en','fr']",7,"<p>This secon edition cancels and replaces the first edition (1942). specifies conditions for a flame retardation test for conveyor belts, and the corresponding requirements. Three figures illustrate shapes and reference quantities of concern. To increase safety provision is made for performing the test on test pieces without covers.</p>"

38500,IS,,ISO 340:2004,Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method,Courroies transporteuses — Caractéristiques d'inflammabilité d'échelle de laboratoire — Exigences et méthode d'essai,2004-11-08,3,"['13.220.40','53.040.20']",ISO/TC 41/SC 3,9599,[4288],[61039],"['en','fr']",7,"<p>ISO 340:2004 specifies a method for assessing, on a small scale, the reaction of a conveyor belt to an ignition flame source. It is applicable to conveyor belts having a textile carcass as well as steel cord conveyor belts.</p>"

61039,IS,,ISO 340:2013,Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method,Courroies transporteuses — Caractéristiques d'inflammabilité d'échelle de laboratoire — Exigences et méthode d'essai,2013-03-20,4,"['13.220.40','53.040.20']",ISO/TC 41/SC 3,9599,[38500],[80883],"['en','fr']",7,"<p>ISO 340:2013 specifies a method for assessing, on a small scale, the reaction of a conveyor belt to an ignition flame source. It is applicable to conveyor belts having a textile carcass as well as steel cord conveyor belts.</p>"

8700,IS,,ISO 3400:1976,Tobacco and tobacco products — Determination of alkaloids in cigarette smoke condensates — Spectrophotometric method,Tabac et produits du tabac — Détermination des alcaloïdes dans les condensats de fumée de cigarette — Méthode spectrophotométrique,1976-10-01,1,['65.160'],ISO/TC 126,9599,,[8701],"['en','fr']",3,

8701,IS,,ISO 3400:1989,Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method,Cigarettes — Détermination des alcaloïdes dans les condensats de fumée — Méthode spectrométrique,1989-06-15,2,['65.160'],ISO/TC 126,9599,[8700],[25144],"['en','fr']",3,

8702,IS,,ISO 3401:1977,Tobacco and tobacco products — Determination of alkaloid retention by filters of cigarettes,Tabac et produits du tabac — Détermination de la rétention des alcaloïdes par les filtres des cigarettes,1977-02-01,1,['65.160'],ISO/TC 126,9599,,[8703],"['en','fr']",6,

8704,IS,,ISO 3402:1978,Tobacco and tobacco products — Atmospheres for conditioning and testing,Tabac et produits du tabac — Atmosphères de conditionnement et d'essai,1978-09-01,2,['65.160'],ISO/TC 126,9599,,[8705],"['en','fr']",1,

8705,IS,,ISO 3402:1991,Tobacco and tobacco products — Atmosphere for conditioning and testing,Tabac et produits du tabac — Atmosphère de conditionnement et d'essai,1991-07-11,3,['65.160'],ISO/TC 126,9599,[8704],[28324],"['en','fr']",2,

28324,IS,,ISO 3402:1999,Tobacco and tobacco products — Atmosphere for conditioning and testing,Tabac et produits du tabac — Atmosphère de conditionnement et d'essai,1999-12-16,4,['65.160'],ISO/TC 126,9599,[8705],[83089],"['en','fr']",5,

8708,IS,,ISO 3405:1975,Petroleum products — Determination of distillation characteristics,Produits pétroliers — Détermination des caractéristiques de distillation,1975-02-01,1,['75.080'],ISO/TC 28,9599,,[8709],"['en','fr']",13,

8709,IS,,ISO 3405:1988,Petroleum products — Determination of distillation characteristics,Produits pétroliers — Détermination des caractéristiques de distillation,1988-12-08,2,['75.080'],ISO/TC 28,9599,[8708],[20720],"['en','fr']",21,

20720,IS,,ISO 3405:2000,Petroleum products — Determination of distillation characteristics at atmospheric pressure,Produits pétroliers — Détermination des caractéristiques de distillation à pression atmosphérique,2000-03-09,3,['75.080'],ISO/TC 28,9599,[8709],[44095],"['en','fr']",33,

44095,IS,,ISO 3405:2011,Petroleum products — Determination of distillation characteristics at atmospheric pressure,Produits pétroliers — Détermination des caractéristiques de distillation à pression atmosphérique,2011-01-14,4,['75.080'],ISO/TC 28,9599,[20720],[67956],"['en','fr','ru']",36,"<p>ISO 3405:2011 specifies a laboratory test method, utilizing either manual or automated equipment, for determining the distillation characteristics of light and middle distillates derived from petroleum and having initial boiling points above 0 °C and end points below approximately 400 °C. </p>"

8713,IS,,ISO 3408-1:1991,Ball screws — Part 1: Vocabulary and designation,Vis à billes — Partie 1: Vocabulaire et désignation,1991-06-20,1,"['25.060.99','01.040.25']",ISO/TC 39,9599,,[35022],"['en','fr']",11,

8712,IS,,ISO 3408:1975,Ball screws — Nominal diameters and basic leads — Metric and inch series,Vis à billes — Diamètres nominaux et pas hélicoïdaux — Séries métrique et en inches,1975-07-01,1,['25.060.99'],ISO/TC 39,9599,,[8714],"['en','fr']",3,

8714,IS,,ISO 3408-2:1991,Ball screws — Part 2: Nominal diameters and nominal leads — Metric series,"Vis à billes — Partie 2: Diamètres et pas hélicoïdaux, nominaux — Série métrique",1991-06-20,1,['25.060.99'],ISO/TC 39,9599,[8712],[75530],"['en','fr']",2,

8715,IS,,ISO 3408-3:1992,Ball screws — Part 3: Acceptance conditions and acceptance tests,Vis à billes — Partie 3: Conditions et essais de réception,1992-06-11,1,['25.060.99'],ISO/TC 39,9599,,[35023],"['en','fr']",22,"<p>Specifies the technical acceptance conditions and, in particular, the respective permissible deviations for the acceptance tests. The respective tests required shall be agreed upon between the manufacturer and the user.</p>"

8720,IS,,ISO 3410:1976,Agricultural machinery — Endless variable-speed V-belts and groove sections of corresponding pulleys,Machines agricoles — Courroies trapézoïdales sans fin pour variateurs de vitesse et profils de gorges des poulies correspondantes,1976-08-01,1,['65.060.01'],ISO/TC 41,9599,,[8721],"['en','fr']",4,

8722,IS,,ISO 3411:1982,Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope,Engins de terrassement — Dimensions ergonomiques des conducteurs et espace enveloppe minimal,1982-12-01,2,['53.100'],ISO/TC 127/SC 2,9599,,[24509],"['en','fr']",7,

8723,IS,Amd,ISO 3411:1982/Amd 1:1989,Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope — Amendment 1,Engins de terrassement — Dimensions ergonomiques des conducteurs et espace enveloppe minimal — Amendement 1,1989-06-15,2,['53.100'],ISO/TC 127/SC 2,9599,,[24509],"['en','fr']",1,

8724,IS,Amd,ISO 3411:1982/Amd 2:1994,Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope — Amendment 2,Engins de terrassement — Dimensions ergonomiques des conducteurs et espace enveloppe minimal — Amendement 2,1994-10-13,2,['53.100'],ISO/TC 127/SC 2,9599,,[24509],"['en','fr']",2,

24509,IS,,ISO 3411:1995,Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope,Engins de terrassement — Dimensions ergonomiques des opérateurs et espace enveloppe minimal des postes de travail,1995-12-21,3,['53.100'],ISO/TC 127/SC 2,9599,"[8724,8722,8723]","[38911,20934]","['en','fr']",10,"<p>Defines the dimensions of male operators of earth-moving machinery and specifies the minimum operating space envelope around the operator enclosures. Replaces the second edition, of which it constitutes a technical revision.</p>"

8725,IS,,ISO 3412:1979,Road vehicles — Screened and waterproof spark plug and its connexion — Type 1,Véhicules routiers — Bougie d'allumage blindée et étanche et sa connexion — Type 1,1979-12-01,2,['43.060.50'],ISO/TC 22,9599,,[8726],"['en','fr']",2,

8727,IS,,ISO 3413:1975,Information processing — Recorded magnetic tapes for interchange instrumentation applications — Standard tape speeds and track configurations,Traitement de l'information — Bandes magnétiques enregistrées pour l'enregistrement de mesures — Normalisation des vitesses de bande et des dispositions des pistes,1975-11-01,1,['35.220.22'],ISO/IEC JTC 1,9599,,[12269],"['en','fr']",10,

8729,IS,,ISO 3415:1975,"Textile floor coverings — Determination of thickness after brief, moderate static loading","Revêtements de sol textiles — Détermination de la perte en épaisseur après application, de courte durée, d'une charge statique modérée",1975-05-01,1,['97.150'],ISO/TC 38,9599,,[8730],"['en','fr']",2,

8731,IS,,ISO 3416:1975,"Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading",Revêtements de sol textiles — Détermination de la perte en épaisseur après application prolongée d'une charge statique élevée,1975-05-01,1,['97.150'],ISO/TC 38,9599,,[8732],"['en','fr']",3,

8733,IS,,ISO 3417:1977,Rubber — Measurement of vulcanization characteristics with the oscillating disc curemeter,Caoutchouc — Détermination des caractéristiques de vulcanisation à l'aide du rhéomètre à disque oscillant,1977-02-01,1,['83.060'],ISO/TC 45,9599,,[8734],"['en','fr']",7,

8734,IS,,ISO 3417:1991,Rubber — Measurement of vulcanization characteristics with the oscillating disc curemeter,Caoutchouc — Détermination des caractéristiques de vulcanisation à l'aide du rhéomètre à disque oscillant,1991-07-18,2,['83.060'],ISO/TC 45/SC 2,9599,[8733],[42239],"['en','fr']",12,<p>Specifies a method for determining selected vulcanization characteristics of a rubber compound. This second edition cancels and replaces the first edition (1975). Annex A is for information only.</p>

42239,IS,,ISO 3417:2008,Rubber — Measurement of vulcanization characteristics with the oscillating disc curemeter,Caoutchouc — Détermination des caractéristiques de vulcanisation à l'aide du rhéomètre à disque oscillant,2008-11-17,3,['83.060'],ISO/TC 45/SC 2,9599,[8734],[70968],"['en','fr']",11,<p>ISO 3417:2008 specifies a method for determining selected vulcanization characteristics of a rubber compound by means of an oscillating disc curemeter. The use of the curemeter is described in ISO 6502.</p>

8748,IS,,ISO 3432:1975,Cheese — Determination of fat content — Butyrometer for Van Gulik method,Fromages — Détermination de la teneur en matières grasse — Butyromètre pour la méthode Van Gulik,1975-07-01,1,"['67.260','67.100.30']",ISO/TC 34/SC 5,9599,,"[8749,46335]","['en','fr']",4,"<p>Specifies the characteristics of an apparatus with a measuring range between 0 and 40 % and illustrates suitable devices for weighing and introducing the cheese test portion. Describes the scale, its graduation and the inscriptions to be marked on the body of the butyrometer. In addition, it gives information on material, shape and dimensions of stoppers for butyrometers.</p>"

8750,IS,,ISO 3433:1975,Cheese — Determination of fat content — Van Gulik method,Fromages — Détermination de la teneur en matière grasse — Méthode Van Gulik,1975-07-01,1,['67.100.30'],ISO/TC 34/SC 5,9599,,"[8751,46336]","['en','fr']",4,"<p>Applicable to all types of cheese. The principle of determination consists in dissolving the protein with sulphuric acid, followed by separation of the cheese fat in a Van Gulik butyrometer by centrifugating, the separation being assisted by addition of a small quality of amyl alcohol. The fat content is read directly on butyrometer scale.</p>"

8752,IS,,ISO 3434:1975,Shipbuilding — Heated glass panes for ships' windows,Construction navale — Vitrages chauffants pour fenêtres de navires,1975-05-01,1,"['47.020.10','81.040.30']",ISO/TC 8/SC 8,9599,,[8753],"['en','fr']",2,

8753,IS,,ISO 3434:1992,Shipbuilding and marine structures — Heated glass panes for ships' rectangular windows,Construction navale et structures maritimes — Vitrages chauffants pour fenêtres rectangulaires de navires,1992-12-17,2,"['47.020.10','47.020.90']",ISO/TC 8/SC 8,9599,[8752],[54517],"['en','fr']",9,"<p>Specifies the characteristics and the conditions with which they shall comply to ensure the safety of ships in times of frost or snow, particularly during manoeuvres in port.</p>"

34363,IS,Amd,ISO 3434:1992/Amd 1:2004,Shipbuilding and marine structures — Heated glass panes for ships' rectangular windows — Amendment 1,Construction navale et structures maritimes — Vitrages chauffants pour fenêtres rectangulaires de navires — Amendement 1,2004-06-28,2,"['47.020.10','47.020.90']",ISO/TC 8/SC 8,9599,,[54517],['en'],2,

8756,IS,,ISO 3437:1975,Road vehicles — Determination of fuel leakage in the event of a collision,Véhicules routiers — Détermination des fuites de combustible lors d'une collision,1975-11-01,1,['43.020'],ISO/TC 22,9599,,[1347],"['en','fr']",1,<p>Specifies a method for determining fuel leakage. Evaluation of fire risk is based on the assumption that a fire is unlikely to occur when the leakage from the fuel system under certain collision conditions is zero or very small. Applies to passenger cars where the engine is fed by liquid fuel.</p>

8757,IS,,ISO 3438:1975,Subland twist drills with Morse taper shanks for holes prior to tapping screw threads,Forets étagés à queue cône Morse pour avant-trous de taraudage,1975-09-01,1,['25.100.30'],ISO/TC 29,9599,,[31359],"['en','fr']",1,"<p>Lays down only metric dimensions, which are the only recommended dimensions in the future for subland twist drills. The drills have been designed to produce holes prior to tapping metric threads over a selected range of M 8 to M 30. Unless otherwise stated, these drills will be rigth-hand cutting. Supplements ISO 2306.</p>"

31359,IS,,ISO 3438:2003,Subland twist drills with Morse taper shanks for holes prior to tapping screw threads,Forets étagés à queue cône Morse pour avant-trous de taraudage,2003-09-01,2,['25.100.30'],ISO/TC 29/SC 9,9599,[8757],[60702],"['en','fr']",3,<p>ISO 3438:2003 lays down the dimensions of subland twist drills with Morse taper shanks for holes prior to tapping screw threads. The drills have been designed to produce holes prior to tapping metric threads (coarse pitch series) over a selected range of M8 to M30. ISO 3438:2003 complements ISO 2306.</p>

8758,IS,,ISO 3439:1975,Subland twist drills with parallel shanks for holes prior to tapping screw threads,Forets étagés à queue cylindrique pour avant-trous de taraudage,1975-09-01,1,['25.100.30'],ISO/TC 29,9599,,[31360],"['en','fr']",1,"<p>Lays down only metric dimensions, which are the only recommended dimensions in the future for these subland twist drills. The drills have been designed to produce holes prior to tapping metric threads over selected range of M 3 to M 14. Unless otherwise stated, these drills will be rigth-hand cutting. Supplements ISO 2306.</p>"

31360,IS,,ISO 3439:2003,Subland twist drills with cylindrical shanks for holes prior to tapping screw threads,Forets étagés à queue cylindrique pour avant-trous de taraudage,2003-09-01,2,['25.100.30'],ISO/TC 29/SC 9,9599,[8758],[60702],"['en','fr']",3,<p>ISO 3439:2003 lays down the dimensions of subland twist drills with cylindrical shanks for holes prior to tapping screw threads. The drills have been designed to produce holes prior to tapping metric threads (coarse pitch series) over a selected range of M3 to M14. ISO 3439:2003 complements ISO 2306.</p>

4293,IS,,ISO 344:1981,Textile machinery and accessories — Spinning machines — Flyer bobbins,Matériel pour l'industrie textile — Machines de filature — Bobinots pour bancs à broches,1981-08-01,1,['59.120.20'],ISO/TC 72/SC 1,9599,"[4295,4294]",[78270],"['en','fr']",2,"<p>Figure 1a shows a flyer bobbin of the type with shoulder, figure 1b gives a flyer bobbin of the type without shoulder. Table 1 contains the main dimensions and tolerances of bobbins with shoulder, table 2 those of bobbins without shoulder. - Replaces ISO Recommendations R 344/1-1963 and R 344/2-1969 and constitutes its technical revision.</p>"

8761,IS,,ISO 3442:1975,Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications,"Mandrins pour machines-outils, à serrage concentrique et à mors rapportés (assemblage cruciforme par tenon et languette) — Dimensions d'interchangeabilité et conditions de réception",1975-11-01,1,['25.060.20'],ISO/TC 39,9599,,[8762],"['en','fr']",6,

8762,IS,,ISO 3442:1991,Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications,"Mandrins pour machines-outils, à serrage concentrique et à mors rapportés (assemblage cruciforme par tenon et languette) — Dimensions d'interchangeabilité et conditions de réception",1991-10-17,2,['25.060.20'],ISO/TC 39/SC 8,9599,[8761],"[32137,39614,39613,40246]","['en','fr']",11,"<p>Defines precision classes as follows: class I, corresponding to precision chucks; class II, corresponding to normal accuracy chucks. This second edition cancels and replaces the first edition (1975).</p>"

8773,IS,,ISO 3448:1975,Industrial liquid lubricants — ISO viscosity classification,Lubrifiants liquides industriels — Classification ISO selon la viscosité,1975-02-01,1,['75.100'],ISO/TC 28,9599,,[8774],"['en','fr']",3,