Withdrawn and superseded ISO standards — page 101 of 246

28604,IS,,ISO 3253:1998,"Gas welding equipment — Hose connections for equipment for welding, cutting and allied processes","Matériel de soudage aux gaz — Raccords pour tuyaux souples pour appareils de soudage, coupage et techniques connexes",1998-09-03,2,['25.160.30'],ISO/TC 44/SC 8,9599,[8466],[44968],"['en','fr']",7,

8467,IS,,ISO 3254:1975,Shipbuilding — Toughened safety glass panes for ships' rectangular windows,Construction navale — Verres de sécurité trempés pour fenêtres rectangulaires de navires,1975-12-01,1,"['47.020.10','81.040.30']",ISO/TC 8/SC 8,9599,,[8468],"['en','fr']",5,

8468,IS,,ISO 3254:1989,Shipbuilding and marine structures — Toughened safety glass panes for rectangular windows,Construction navale et structures maritimes — Verres de sécurité trempés pour fenêtres rectangulaires de navires,1989-08-24,2,"['47.020.10','81.040.30']",ISO/TC 8/SC 8,9599,[8467],[34364],"['en','fr']",3,"<p>Specifies materials and finish, dimensions for interchangeability, tolerances, parallelism and fiatness, testing, marking and designation complying with ISO 3903.</p>"

8471,IS,,ISO 3257:1982,Rubber compounding ingredients - Carbon black - Test recipe and method of evaluation in styrene- butadiene rubbers,Ingrédients de mélange du caoutchouc — Noir de carbone — Formule d'essai et méthode d'évaluation dans les caoutchoucs,1982-02-01,2,['83.040.20'],ISO/TC 45,9599,,[8472],"['en','fr']",2,

8474,IS,,ISO 3260:1982,Pulps — Determination of chlorine consumption (Degree of delignification),Pâtes — Détermination de la consommation en chlore (Degré de délignification),1982-11-01,2,['85.040'],ISO/TC 6,9599,,[66535],"['en','fr']",3,"<p>Refers to the linear relationship between chlorine consumption and the total lignin content of pulp, and is applicable to all kinds of pulp.</p>"

8477,IS,,ISO 3262-1:1997,Extenders for paints — Specifications and methods of test — Part 1: Introduction and general test methods,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 1: Introduction et méthodes d'essai générales,1997-06-19,1,['87.060.10'],ISO/TC 256,9599,[8476],[78415],"['en','fr']",6,

8484,IS,,ISO 3262-10:2000,Extenders for paints — Specifications and methods of test — Part 10: Natural talc/chlorite in lamellar form,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 10: Talc et chlorite naturels sous forme lamellaire,2000-05-04,1,['87.060.10'],ISO/TC 256,9599,[8476],[84003],"['en','fr']",4,

8486,IS,,ISO 3262-11:2000,"Extenders for paints — Specifications and methods of test — Part 11: Natural talc, in lamellar form, containing carbonates",Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 11: Talc naturel sous forme lamellaire contenant des carbonates,2000-05-11,1,['87.060.10'],ISO/TC 256,9599,[8476],[84004],"['en','fr']",3,

23342,IS,,ISO 3262-12:2001,Extenders for paints — Specifications and methods of test — Part 12: Muscovite-type mica,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 12: Mica de type muscovite,2001-10-25,1,['87.060.10'],ISO/TC 256,9599,[8476],[85115],"['en','fr']",2,

20341,IS,,ISO 3262-13:1997,Extenders for paints — Specifications and methods of test — Part 13: Natural quartz (ground),Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 13: Quartz naturel broyé,1997-06-19,1,['87.060.10'],ISO/TC 256,9599,[8476],[84005],"['en','fr']",4,

20342,IS,,ISO 3262-14:2000,Extenders for paints — Specifications and methods of test — Part 14: Cristobalite,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 14: Cristobalite,2000-05-11,1,['87.060.10'],ISO/TC 256,9599,[8476],[84006],"['en','fr']",3,<p>This part of ISO 3262 specifies requirements and corresponding methods of test for cristobalite.</p>

20343,IS,,ISO 3262-15:2000,Extenders for paints — Specifications and methods of test — Part 15: Vitreous silica,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 15: Silice vitreuse,2000-05-18,1,['87.060.10'],ISO/TC 256,9599,[8476],[84007],"['en','fr']",4,<p>This part of ISO 3262 specifies requirements and corresponding methods of test for vitreous silica.</p>

32844,IS,,ISO 3262-16:2000,Extenders for paints — Specifications and methods of test — Part 16: Aluminium hydroxides,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 16: Alumines hydratées,2000-04-27,1,['87.060.10'],ISO/TC 256,9599,[8476],[84008],"['en','fr']",3,<p>This part of ISO 3262 specifies requirements and corresponding methods of test for aluminium hydroxides.</p>

32851,IS,,ISO 3262-17:2000,Extenders for paints — Specifications and methods of test — Part 17: Precipitated calcium silicate,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 17: Silicate de calcium précipité,2000-04-27,1,['87.060.10'],ISO/TC 256,9599,[8476],[84009],"['en','fr']",11,<p>This part of ISO 3262 specifies requirements and corresponding methods of test for precipitated calcium silicate.</p>

32855,IS,,ISO 3262-18:2000,Extenders for paints — Specifications and methods of test — Part 18: Precipitated sodium aluminium silicate,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 18: Silicoaluminate de sodium précipité,2000-04-27,1,['87.060.10'],ISO/TC 256,9599,[8476],[84010],"['en','fr']",11,<p>This part of ISO 3262 specifies requirements and corresponding methods of test for precipitated sodium aluminium</p><p>silicate.</p>

32961,IS,,ISO 3262-19:2000,Extenders for paints — Specifications and methods of test — Part 19: Precipitated silica,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 19: Silice précipitée,2000-04-27,1,['87.060.10'],ISO/TC 256,9599,[8476],[78418],"['en','fr']",9,<p>This part of ISO 3262 specifies requirements and corresponding methods of test for precipitated silica.</p>

8476,IS,,ISO 3262:1975,Extenders for paints,Matières de charge pour peintures,1975-09-01,1,['87.060.10'],ISO/TC 256,9599,,"[20342,8480,32851,8481,23342,20343,8482,32844,32961,8483,32962,8484,8477,32956,8478,20339,32963,32855,8479,20340,8486,20341]","['en','fr']",16,

8478,IS,,ISO 3262-2:1998,Extenders for paints — Specifications and methods of test — Part 2: Barytes (natural barium sulfate),Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 2: Barytine (sulfate de baryum naturel),1998-07-02,1,['87.060.10'],ISO/TC 256,9599,[8476],[83996],"['en','fr']",6,

32962,IS,,ISO 3262-20:2000,Extenders for paints — Specifications and methods of test — Part 20: Fumed silica,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 20: Silice pyrogénée,2000-04-27,1,['87.060.10'],ISO/TC 256,9599,[8476],[78419],"['en','fr']",13,<p>This part of ISO 3262 specifies requirements and corresponding methods of test for fumed silica.</p>

32963,IS,,ISO 3262-21:2000,Extenders for paints — Specifications and methods of test — Part 21: Silica sand (unground natural quartz),Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 21: Sable de silice (quartz naturel non broyé),2000-04-27,1,['87.060.10'],ISO/TC 256,9599,[8476],[84011],"['en','fr']",4,<p>This part of ISO 3262 specifies requirements and corresponding methods of test for silica sand (unground natural</p><p>quartz).</p>

32956,IS,,ISO 3262-22:2001,Extenders for paints — Specifications and methods of test — Part 22: Flux-calcined kieselguhr,"Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 22: Kieselguhr, flux-calciné",2001-11-01,1,['87.060.10'],ISO/TC 256,9599,[8476],[85114],"['en','fr']",4,

8479,IS,,ISO 3262-3:1998,Extenders for paints — Specifications and methods of test — Part 3: Blanc fixe,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 3: Blanc fixe,1998-07-02,1,['87.060.10'],ISO/TC 256,9599,[8476],[83997],"['en','fr']",4,

8480,IS,,ISO 3262-4:1998,Extenders for paints — Specifications and methods of test — Part 4: Whiting,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 4: Craie,1998-07-02,1,['87.060.10'],ISO/TC 256,9599,[8476],[83998],"['en','fr']",3,

20339,IS,,ISO 3262-5:1998,Extenders for paints — Specifications and methods of test — Part 5: Natural crystalline calcium carbonate,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 5: Carbonate de calcium cristallin naturel,1998-07-02,1,['87.060.10'],ISO/TC 256,9599,[8476],[83999],"['en','fr']",3,

20340,IS,,ISO 3262-6:1998,Extenders for paints — Specifications and methods of test — Part 6: Precipitated calcium carbonate,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 6: Carbonate de calcium précipité,1998-07-02,1,['87.060.10'],ISO/TC 256,9599,[8476],[81974],"['en','fr']",3,

8481,IS,,ISO 3262-7:1998,Extenders for paints — Specifications and methods of test — Part 7: Dolomite,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 7: Dolomite,1998-07-02,1,['87.060.10'],ISO/TC 256,9599,[8476],[84000],"['en','fr']",3,

8482,IS,,ISO 3262-8:1999,Extenders for paints — Specifications and methods of test — Part 8: Natural clay,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 8: Kaolin naturel,1999-10-07,1,['87.060.10'],ISO/TC 256,9599,[8476],[84001],"['en','fr']",7,

8483,IS,,ISO 3262-9:1997,Extenders for paints — Specifications and methods of test — Part 9: Calcined clay,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie 9: Kaolin calciné,1997-06-19,1,['87.060.10'],ISO/TC 256,9599,[8476],[84002],"['en','fr']",9,

8488,IS,,ISO 3263:1974,Withdrawal of ISO 3263-1974,Annulation de l'ISO 3263-1974,1974-11-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

8489,IS,,ISO 3264:1974,Withdrawal of ISO 3264-1974,Annulation de l'ISO 3264-1974,1974-11-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2,

8491,IS,,ISO 3266:1984,Eyebolts for general lifting purposes,Anneaux à tige pour applications de levage général,1984-11-01,1,['53.020.30'],ISO/TC 111/SC 3,9599,,"[36657,26372]","['en','fr']",7,"<p>Specifies the basic dimensions, material, lifting capacity and conditions of use. The eyebolts may be used for vertical and inclined lifting (see the annex). Applies to eyebolts with and without recessed collar, which are forged in one piece. The eyebolts are suitable for eyehooks of the same lifting capacity.</p>"

8492,IS,,ISO 3267:1975,Road vehicles — Headlamp cleaners,Véhicules routiers — Nettoyeurs de projecteurs,1975-06-01,1,['43.040.20'],ISO/TC 22,9599,,[8493],['en'],2,

8493,IS,,ISO 3267:1991,Road vehicles — Headlamp cleaners,Véhicules routiers — Dispositifs de nettoyage des projecteurs,1991-10-10,2,['43.040.20'],ISO/TC 22,9599,[8492],[54019],"['en','fr']",4,"<p>Specifies terms and definitions. Gives photometric requirements, and describes the test procedure. This second edition cancels and replaces the first edition (1975).</p>"

8494,IS,,ISO 3268:1978,Plastics — Glass reinforced materials — Determination of tensile properties,Plastiques — Matières renforcées au verre textile — Détermination des caractéristiques en traction,1978-05-01,1,['83.120'],ISO/TC 61/SC 13,9599,,"[22169,4595]","['en','fr']",8,

8495,IS,,ISO 3269:1984,Fasteners — Acceptance inspection,Éléments de fixation — Contrôle de réception,1984-08-01,1,['21.060.01'],ISO/TC 2,9599,,[8496],"['en','fr']",4,

8496,IS,,ISO 3269:1988,Fasteners — Acceptance inspection,Éléments de fixation — Contrôle de réception,1988-12-29,2,['21.060.01'],ISO/TC 2,9599,[8495],[22906],"['en','fr']",8,

22906,IS,,ISO 3269:2000,Fasteners — Acceptance inspection,Éléments de fixation — Contrôle de réception,2000-05-25,3,['21.060.01'],ISO/TC 2/SC 7,9599,[8496],"[72605,61180]","['en','fr','ru']",17,

8497,IS,,ISO 3270:1980,Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing,Peintures et vernis et leurs matières premières — Températures et humidités pour le conditionnement et l'essai,1980-06-01,2,"['87.040','87.060.01']",ISO/TC 35,9599,,[8498],"['en','fr']",2,

8499,IS,,ISO 3271:1975,Iron ores — Determination of tumbler strength,Minerais de fer — Essai au tambour,1975-02-01,1,['73.060.10'],ISO/TC 102,9599,,[8500],"['en','fr']",5,

8500,IS,,ISO 3271:1985,Iron ores — Determination of tumbler strength,Minerais de fer — Essai au tambour,1985-02-07,2,['73.060'],ISO/TC 102/SC 3,9599,[8499],[1652],"['en','fr']",6,

1652,IS,,ISO 3271:1995,Iron ores — Determination of tumble strength,Minerais de fer — Essai au tambour,1995-11-09,3,['73.060.10'],ISO/TC 102/SC 3,9599,[8500],[38081],"['en','fr']",7,<p>Describes a method for evaluating the tumble strength of iron ores by determining the tumble index and the abrasion index. Applicable to sized iron ore and ore agglomerates. Replaces the second edition.</p>

38081,IS,,ISO 3271:2007,Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices,Minerais de fer pour charges de hauts fourneaux et pour procédés par réduction directe — Détermination des indices de cohésion et d'abrasion,2007-10-01,4,['73.060.10'],ISO/TC 102/SC 3,9599,[1652],[62135],['en'],6,"<p>ISO 3271:2007 specifies a method to provide a relative measure for evaluating the resistance of iron ores to size degradation by impact and abrasion. It covers the determination of the tumble and abrasion indices.</p><p>ISO 3271:2007 is applicable to lump ores, sinters and hot-bonded pellets.</p>"

8501,IS,,ISO 3272-1:1983,Microfilming of technical drawings and other drawing office documents — Part 1: Operating procedures,Micrographie des dessins techniques et autres documents de bureau d'études — Partie 1: Techniques opératoires,1983-06-01,1,"['01.100.01','37.080']",ISO/TC 171/SC 2,9599,,[36544],"['en','fr']",4,"<p>Microfilming procedures, systems and methods differ from country to country. These differences will not affect the exchange of technical drawings and other drawings office documents if the specifications given here are followed. Microforms of technical drawings are generally produced on 35 mm unperforated film. The use of unitized microfilm carries for international exchang

8502,IS,,ISO 3272-2:1978,Microfilming of technical drawings and other drawing office documents — Part 2: Quality criteria and control,Micrographie des dessins techniques et autres documents de bureau d'études — Partie 2: Critères et contrôle de la qualité,1978-05-01,1,"['01.100.01','37.080']",ISO/TC 171,9599,,[8503],"['en','fr']",4,

8504,IS,Amd,ISO 3272-2:1978/Amd 1:1980,Microfilming of technical drawings and other drawing office documents — Part 2: Quality criteria and control — Amendment 1,Micrographie des dessins techniques et autres documents de bureau d'études — Partie 2: Critères et contrôle de la qualité — Amendement 1,1980-06-01,1,"['01.100.01','37.080']",ISO/TC 171,9599,,[8503],"['en','fr']",1,

8505,IS,,ISO 3272-3:1975,Microcopying of technical drawings and other drawing office documents — Part 3: Unitized 35 mm microfilm carriers,Microcopie des dessins techniques et autres documents de bureau d'études — Partie 3: Microcopies unitaires sur film de 35 mm,1975-09-01,1,"['01.100.01','37.080']",ISO/TC 171/SC 2,9599,,"[8506,36114]","['en','fr']",4,

8510,IS,,ISO 3274:1975,"Instruments for the measurement of surface roughness by the profile method — Contact (stylus) instruments of consecutive profile transformation — Contact profile meters, system M","Instruments de mesurage de la rugosité des surfaces par la méthode du profil — Instruments à palpeur-aiguille, à transformation progressive du profil — Profilomètres à contact du système M",1975-07-01,1,['17.040.30'],ISO/TC 213,9599,,[1916],"['en','fr']",7,

1916,IS,,ISO 3274:1996,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Caractéristiques nominales des appareils à contact (palpeur),1996-12-05,2,['17.040.30'],ISO/TC 213,9599,"[6556,8510]",[79673],"['en','fr']",13,<p>Describes profiles and the general structure of contact (stylus) instruments for measuring surface roughness and waviness. Specifies the properties of the instrument which influence profile evaluation. Replaces the first edition of ISO 3274:1975 and ISO 1880:1979.</p>

29873,IS,Cor,ISO 3274:1996/Cor 1:1998,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Caractéristiques nominales des appareils à contact (palpeur) — Rectificatif technique 1,1998-05-28,2,['17.040.30'],ISO/TC 213,9599,,[79673],"['en','fr']",1,

8512,IS,,ISO 3276:1975,Withdrawal of ISO 3276-1975,Annulation de l'ISO 3276-1975,1975-02-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

8513,IS,,ISO 3277:1974,Withdrawal of ISO 3277-1974,Annulation de l'ISO 3277-1974,1974-12-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2,

8514,IS,,ISO 3278:1974,Withdrawal of ISO 3278-1974,Annulation de l'ISO 3278-1974,1974-12-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

8515,IS,,ISO 3279:1974,Withdrawal of ISO 3279-1974,Annulation de l'ISO 3279-1974,1974-12-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

8516,IS,,ISO 3280:1974,Withdrawal of ISO 3280-1974,Annulation de l'ISO 3280-1974,1974-12-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

8517,IS,,ISO 3281:1974,Withdrawal of ISO 3281-1974,Annulation de l'ISO 3281-1974,1974-11-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

8519,IS,,ISO 3283:1974,Withdrawal of ISO 3283-1974,Annulation de l'ISO 3283-1974,1974-12-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2,

8521,IS,,ISO 3285:1974,Road vehicles — Ignition coil fixing band,Véhicules routiers — Bande de fixation pour bobines d'allumage,1974-12-01,1,['43.060.50'],ISO/TC 22,9599,,[8522],"['en','fr']",1,

8523,IS,,ISO 3286:1976,Single point cutting tools — Corner radii,Outils de coupe à partie active unique — Rayons de pointe,1976-12-01,1,['25.100.01'],ISO/TC 29/SC 9,9599,,[68789],"['en','fr']",1,

8524,IS,,ISO 3287:1978,Powered industrial trucks — Control symbols,Chariots de manutention automoteurs — Symboles pour organes de commande,1978-07-01,1,"['01.080.20','53.060']",ISO/TC 110/SC 2,9599,,[1130],"['en','fr']",9,

44768,IS,,ISO 3290-1:2008,Rolling bearings — Balls — Part 1: Steel balls,Roulements — Billes — Partie 1: Billes de roulement en acier,2008-12-10,1,['21.100.20'],ISO/TC 4/SC 12,9599,[32333],[60132],"['en','fr']",11,<p>ISO 3290-1:2008 specifies requirements for finished steel balls for rolling bearings.</p>

54093,IS,Cor,ISO 3290-1:2008/Cor 1:2009,Rolling bearings — Balls — Part 1: Steel balls — Technical Corrigendum 1,Roulements — Billes — Partie 1: Billes de roulement en acier — Rectificatif technique 1,2009-04-23,1,['21.100.20'],ISO/TC 4/SC 12,9599,,[60132],"['en','fr']",1,

8526,IS,,ISO 3290:1975,Rolling bearings — Bearing parts — Balls for rolling bearings,Roulements — Éléments de roulements — Billes pour roulements,1975-09-01,1,['21.100.20'],ISO/TC 4,9599,,"[20517,8525]","['en','fr']",8,

20517,IS,,ISO 3290:1998,Rolling bearings — Balls — Dimensions and tolerances,Roulements — Billes — Dimensions et tolérances,1998-06-04,2,['21.100.20'],ISO/TC 4,9599,[8526],[32333],"['en','fr']",8,

42166,IS,,ISO 3290-2:2008,Rolling bearings — Balls — Part 2: Ceramic balls,Roulements — Billes — Partie 2: Billes de roulement en céramique,2008-12-10,1,['21.100.20'],ISO/TC 4/SC 12,9599,,[60133],"['en','fr']",12,<p>ISO 3290-2:2008 specifies requirements for finished silicon nitride balls for rolling bearings.</p>

32333,IS,,ISO 3290:2001,Rolling bearings — Balls — Dimensions and tolerances,Roulements — Billes — Dimensions et tolérances,2001-12-13,3,['21.100.20'],ISO/TC 4,9599,[20517],[44768],"['en','fr']",9,

8527,IS,,ISO 3291:1975,Extra long Morse taper shank twist drills,Forets extra-longs à queue cône Morse,1975-05-01,1,['25.100.30'],ISO/TC 29,9599,,[21892],"['en','fr']",3,

21892,IS,,ISO 3291:1995,Extra-long Morse taper shank twist drills,Forets extra-longs à queue cône Morse,1995-12-14,2,['25.100.30'],ISO/TC 29/SC 9,9599,[8527],[64197],"['en','fr']",4,<p>Gives the dimensions and a list of the preferred diameters of extra-long Morse taper shank twist drills in the range 6 mm to 50 mm with an overall length range of 200 mm to 630 mm.</p>

8528,IS,,ISO 3292:1975,Extra long parallel shank twist drills,Forets extra-longs à queue cylindrique,1975-04-01,1,['25.100.30'],ISO/TC 29,9599,,[21893],"['en','fr']",2,

21893,IS,,ISO 3292:1995,Extra-long parallel shank twist drills,Forets extra-longs à queue cylindrique,1995-12-14,2,['25.100.30'],ISO/TC 29/SC 9,9599,[8528],[64198],"['en','fr']",3,<p>Gives the dimensions and a list of the preferred diameters of extra-long parallel shank twist drills in the range 2 mm to 14 mm with an overall length range of 125 mm to 400 mm.</p>

8529,IS,,ISO 3293:1975,"Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive","Outils à chanfreiner à queue cône Morse, à angle au sommet de 60 degrés, 90 degrés et 120 degrés",1975-07-01,1,['25.100.30'],ISO/TC 29/SC 9,9599,,[65992],"['en','fr']",1,"<p>Specifies only the metric dimensions of these countersinks. Metric dimensions being regarded as the only recommended dimensions in the future, for these countersinks with diameters in the range 16 to 80 mm. The dimensions given apply only to tools made from high speed steel or a suitable carbon steel. These countersinks will be usually rigth-hand cutting.</p>"

8530,IS,,ISO 3294:1975,"Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive","Outils à chanfreiner à queue cylindrique, à angle au sommet de 60, 90 et 120 degrés",1975-07-01,1,['25.100.30'],ISO/TC 29/SC 9,9599,,[65995],"['en','fr']",1,"<p>Specifies only metric dimensions of these countersinks. Metric dimensions being regarded as the only recommended dimensions in the future, for these countersinks with cutting diameters in the range 8 to 25 mm. The dimensions given apply only to tools made from high speed steel or a suitable carbon steel. These countersinks will be usually right-hand cutting.</p>"

8532,IS,,ISO 3296:1975,Withdrawal of ISO 3296-1975,Annulation de l'ISO 3296-1975,1975-05-01,1,['59.120.01'],ISO/TC 72,9599,,[4341],"['en','fr']",4,

8533,IS,,ISO 3297:1975,Documentation — International standard serial numbering (ISSN),Documentation — Numérotation internationale normalisée des publications en série (ISSN),1975-01-01,1,['01.140.20'],ISO/TC 46,9599,,[8534],"['en','fr']",4,

8534,IS,,ISO 3297:1986,Documentation — International standard serial numbering (ISSN),Documentation — Numérotation internationale normalisée des publications en série (ISSN),1986-06-12,2,['01.140.20'],ISO/TC 46/SC 9,9599,[8533],[23400],"['en','fr']",4,

23400,IS,,ISO 3297:1998,Information and documentation — International standard serial number (ISSN),Information et documentation — Numéro international normalisé des publications en série (ISSN),1998-11-12,3,['01.140.20'],ISO/TC 46/SC 9,9599,[8534],[39601],"['en','fr']",7,

39601,IS,,ISO 3297:2007,Information and documentation — International standard serial number (ISSN),Information et documentation — Numéro international normalisé des publications en série (ISSN),2007-08-16,4,['01.140.20'],ISO/TC 46/SC 9,9599,[23400],[73322],"['en','fr']",20,"<p>ISO 3297:2007 defines and promotes the use of a standard code (ISSN) for the unique identification of serials and other continuing resources.</p><p>Each International Standard Serial Number (ISSN) is a unique identifier for a specific serial or other continuing resource in a defined medium. ISO 3297:2007 also describes a mechanism, the “linking ISSN (ISSN-L),” that provides for collocation or linking among the differ

73322,IS,,ISO 3297:2017,Information and documentation — International standard serial number (ISSN),Information et documentation — Numéro international normalisé des publications en série (ISSN),2017-10-25,5,['01.140.20'],ISO/TC 46/SC 9,9599,[39601],[73846],"['en','fr']",20,"<p>ISO 3297:2017 defines and promotes the use of a standard code (ISSN) for the unique identification of serials and other continuing resources.</p><p>Each International Standard Serial Number (ISSN) is a unique identifier for a specific serial or other continuing resource in a defined medium. ISO 3297:2017 also describes a mechanism, the 'linking ISSN (ISSN-L)', that provides for collocation or linking among the differ

73846,IS,,ISO 3297:2020,Information and documentation — International standard serial number (ISSN),Information et documentation — Numéro international normalisé des publications en série (ISSN),2020-10-07,6,['01.140.20'],ISO/TC 46/SC 9,9599,[73322],[84536],"['en','fr']",26,"<p>This document defines and promotes the use of a standard code (ISSN) for the unique identification of serials and other continuing resources.</p><p>Each International Standard Serial Number (ISSN) is a unique identifier for a serial or other continuing resource in a defined medium whether print or electronic.</p><p>This document also allows for grouping related continuing resources into clusters identified by a separ

8536,IS,,ISO 3298:1976,Photographic grade glacial acetic acid — Specification,Acide acétique cristallisable de qualité photographique — Spécifications,1976-04-01,1,['37.040.30'],ISO/TC 42,9599,,[8537],"['en','fr']",3,

8538,IS,,ISO 3299:1976,Photographic grade 1- phenyl-3-pyrazolidinone (Phenidone) — Specification,Phényl-1 pyrazolidinone-3 (Phénidone) de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20286],"['en','fr']",5,

8539,IS,,ISO 3300:1976,"Photographic grade sodium thiosulphate, anhydrous — Specification",Thiosulfate de sodium anhydre de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[18730],"['en','fr']",4,

8544,IS,,ISO 3302-1:1996,Rubber — Tolerances for products — Part 1: Dimensional tolerances,Caoutchouc — Tolérances pour produits — Partie 1: Tolérances dimensionnelles,1996-07-18,1,['83.140.01'],ISO/TC 45/SC 4,9599,[8542],[62492],"['en','fr']",8,

33762,IS,Amd,ISO 3302-1:1996/Amd 1:2001,Rubber — Tolerances for products — Part 1: Dimensional tolerances — Amendment 1: Classification system for flash,Caoutchouc — Tolérances pour produits — Partie 1: Tolérances dimensionnelles — Amendement 1: Système de classification des bavures,2001-06-07,1,['83.140.01'],ISO/TC 45/SC 4,9599,,[62492],"['en','fr']",1,

8541,IS,,ISO 3302:1976,Rubber — Dimensional tolerances of solid moulded and extruded products,Caoutchouc — Tolérances dimensionnelles des produits compacts moulés et extrudés,1976-08-01,1,['83.140.01'],ISO/TC 45,9599,,[8542],"['en','fr']",7,

8543,IS,Amd,ISO 3302:1976/Amd 1:1983,Rubber — Dimensional tolerances of solid moulded and extruded products — Amendment 1,Caoutchouc — Tolérances dimensionnelles des produits compacts moulés et extrudés — Amendement 1,1983-09-01,1,['83.140.01'],ISO/TC 45,9599,,[8542],['en'],2,

8542,IS,,ISO 3302:1990,Rubber — Dimensional tolerances for use with products,Caoutchouc — Tolérances dimensionnelles à utiliser pour les produits,1990-04-12,2,['83.140.01'],ISO/TC 45/SC 4,9599,"[8541,8543]",[8544],"['en','fr']",8,

8545,IS,,ISO 3302-2:1998,Rubber — Tolerances for products — Part 2: Geometrical tolerances,Caoutchouc — Tolérances pour produits — Partie 2: Tolérances géométriques,1998-03-12,1,['83.140.01'],ISO/TC 45/SC 4,9599,,[45996],"['en','fr']",7,

45996,IS,,ISO 3302-2:2008,Rubber — Tolerances for products — Part 2: Geometrical tolerances,Caoutchouc — Tolérances pour produits — Partie 2: Tolérances géométriques,2008-09-15,2,['83.140.01'],ISO/TC 45/SC 4,9599,[8545],[84074],"['en','fr']",8,"<p>ISO 3302-2:2008 specifies the following geometrical tolerances for moulded and extruded solid rubber products, including those with metal inserts:</p><ul><li>flatness tolerance;</li><li>parallelism tolerance;</li><li>perpendicularity tolerance;</li><li>coaxiality tolerance;</li><li>positional tolerance.</li></ul><p>The tolerances are primarily intended for use with vulcanized rubber but may also be suitable for products made of thermoplastic rubber

59656,IS,,ISO 3303-1:2012,Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance à l'éclatement — Partie 1: Méthode utilisant une bille d'acier,2012-08-09,1,['59.080.40'],ISO/TC 45/SC 4,9599,[8547],[75519],"['en','fr']",4,"<p>ISO 3303-1:2012 specifies a method for the determination of the bursting strength of rubber- or plastics-coated fabrics, using a mechanically operated steel ball.</p>"

8546,IS,,ISO 3303:1979,Rubber- or plastics-coated fabrics — Determination of bursting strength,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance à l'éclatement,1979-12-01,1,['59.080.40'],ISO/TC 45,9599,,[8547],"['en','fr']",3,

8547,IS,,ISO 3303:1990,Rubber- or plastics-coated fabrics — Determination of bursting strength,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance à l'éclatement,1990-03-01,2,['59.080.40'],ISO/TC 45/SC 4,9599,[8546],"[59657,59656]","['en','fr']",3,<p>Lays down two methods: one using a testing tensile machine with a ring clamp and steel ball and the other using a diaphragm bursting tester operated by hydraulic pressure. The apparatus for the two methods are shown in figures.</p>

59657,IS,,ISO 3303-2:2012,Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance à l'éclatement — Partie 2: Méthode hydraulique,2012-08-09,1,['59.080.40'],ISO/TC 45/SC 4,9599,[8547],[75520],"['en','fr']",6,"<p>ISO 3303-2:2012 specifies a method for the determination of the bursting strength of rubber- or plastics-coated fabrics, using one of two types of diaphragm bursting tester, designated type A and B, both operated by hydraulic pressure. The type A test machine is applicable to materials having bursting strengths ranging from 350 kPa to 5 500 kPa and the ty

8548,IS,,ISO 3304:1975,Plain end seamless precision steel tubes — Technical conditions for delivery,"Tubes de précision en acier, sans soudure, à extrémités lisses — Conditions techniques de livraison",1975-11-01,1,['23.040.10'],ISO/TC 5,9599,,[8549],"['en','fr']",6,

8550,IS,,ISO 3305:1976,Plain end welded precision steel tubes — Technical conditions for delivery,"Tubes de précision en acier, soudés, à extrémités lisses — Conditions techniques de livraison",1976-06-01,1,['23.040.10'],ISO/TC 5,9599,,[8551],"['en','fr']",6,

8552,IS,,ISO 3306:1975,Plain end as-welded and sized precision steel tubes — Technical conditions for delivery,"Tubes de précision en acier, soudés, calibrés extérieurement, à extrémités lisses — Conditions techniques de livraison",1975-11-01,1,['23.040.10'],ISO/TC 5,9599,,[8553],"['en','fr']",6,

8554,IS,,ISO 3307:1975,Information interchange — Representations of time of the day,Échange d'information — Représentations de l'heure,1975-03-01,1,"['35.240.63','01.140.30']",ISO/TC 154,9599,,[15903],"['en','fr']",2,

8555,IS,,ISO 3308:1977,"Tobacco and tobacco products — Routine analytical cigarette-smoking machine — Definitions, standard conditions and auxiliary equipment","Tabac et produits du tabac — Machine à fumer analytique de routine pour cigarettes — Définitions, conditions normalisées et équipement auxiliaire",1977-12-01,1,['65.160'],ISO/TC 126,9599,,"[8556,8557]","['en','fr']",8,

8556,IS,,ISO 3308:1986,Cigarettes — Routine analytical cigarette-smoking machine — Definitions and standard conditions,Cigarettes — Machine à fumer analytique de routine pour cigarettes — Définitions — Conditions normalisées,1986-12-18,2,['65.160'],ISO/TC 126,9599,[8555],[8557],"['en','fr']",8,

8557,IS,,ISO 3308:1991,Routine analytical cigarette-smoking machine — Definitions and standard conditions,Machine à fumer analytique de routine pour cigarettes — Définitions et conditions normalisées,1991-10-31,3,['65.160'],ISO/TC 126,9599,"[8556,8555]",[28325],"['en','fr']",19,

28325,IS,,ISO 3308:2000,Routine analytical cigarette-smoking machine — Definitions and standard conditions,Machine à fumer analytique de routine pour cigarettes — Définitions et conditions normalisées,2000-04-13,4,['65.160'],ISO/TC 126,9599,[8557],[60404],"['en','fr']",23,