DIN 965
For DIN 965, iso standard is ISO 7046; part is Cross Recessed Flat Head; interchangeability verdict is Check spec, verified against its source on 2026-08-05.
- DIN standard
- DIN 965 verified
- ISO standard
- ISO 7046 verified
- Part
- Cross Recessed Flat Head verified
- Interchangeability verdict
- Check spec verified
- BS standard
- BS3692 per trfastenings.com
What the source says
Cross Recessed Flat Head | DIN 965 | ISO 7046 | Check spec | Head/countersink geometry.
— monsterbolts.com, retrieved 2026-08-05
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Part
monsterbolts.com says part is Cross Recessed Flat Head, as of 2026-08-05.
Cross Recessed Flat Head | DIN 965 | ISO 7046 | Check spec | Head/countersink geometry.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says part is Cross Recessed Countersunk Flat Head Screws, as of 2026-08-05.
DIN 965 | ISO 7046 | BS3692 | Cross Recessed Countersunk Flat Head Screws |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards