DIN 964
For DIN 964, iso standard is ISO 2010; part is Slotted Raised Countersunk; interchangeability verdict is Check spec, verified against its source on 2026-08-05.
- DIN standard
- DIN 964 verified
- ISO standard
- ISO 2010 verified
- Part
- Slotted Raised Countersunk verified
- Interchangeability verdict
- Check spec verified
- BS standard
- BS3692 per trfastenings.com
What the source says
Slotted Raised Countersunk | DIN 964 | ISO 2010 | Check spec | Raised profile may differ slightly.
— monsterbolts.com, retrieved 2026-08-05
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Part
monsterbolts.com says part is Slotted Raised Countersunk, as of 2026-08-05.
Slotted Raised Countersunk | DIN 964 | ISO 2010 | Check spec | Raised profile may differ slightly.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says part is Slotted Raised Countersunk Oval Head Screws, as of 2026-08-05.
DIN 964 | ISO 2010 | BS3692 | Slotted Raised Countersunk Oval Head Screws |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards