A575 · M1031 & M1044
For A575, class or grade is M1031 & M1044; esab preheat group is B; esab-recommended smaw (stick) filler is AA 8018; esab-recommended gmaw/gtaw filler is SA 83; esab-recommended saw (submerged arc) filler is 10.71/SA 75, recorded from its source on 2026-09-16.
- ASTM specification
- A575 verified
- Class or grade
- M1031 & M1044 verified
- ESAB preheat group
- B verified
- ESAB-recommended SMAW (stick) filler
- AA 8018 verified
- ESAB-recommended GMAW/GTAW filler
- SA 83 verified
- ESAB-recommended SAW (submerged arc) filler
- 10.71/SA 75 verified
- ESAB-recommended FCAW (gas-shielded flux-cored) filler
- DS II 80Ni1H4/810X Ni1/800X Ni1/II 81K2 H4 verified
- ESAB-recommended FCAW (self-shielded flux-cored) filler
- CS 8-Ni2 verified
- ESAB-recommended MCAW (metal-cored) filler
- CW 80 D2 verified
- Suggested preheat by thickness, low hydrogen (H8 and less) — the A-D column for this grade's preheat group
- T < .75: 70, .75 < T < 1.5: 125, 1.5 < T < 2.5: 200, T > 2.5: 300 our reading
- Suggested preheat by thickness, hydrogen above H8 — the A-D column for this grade's preheat group
- T < .75: 175, .75 < T < 1.5: 225, 1.5 < T < 2.5: 275, T > 2.5: 300 our reading
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
A575 M1008 thru M1025 A Group 1, AA 7018/7018 Acclaim Group 1 M1031 & M1044 B AA 8018 SA 83
— assets.esab.com, retrieved 2026-09-16
Where each value comes from
This source states these in separate places, so each value is shown with the passage it comes from.
ESAB-recommended SAW (submerged arc) filler, ESAB-recommended FCAW (gas-shielded flux-cored) filler, ESAB-recommended FCAW (self-shielded flux-cored) filler and ESAB-recommended MCAW (metal-cored) filler
The source prints these values inside the passage below but does not name them there. The passage shows where each one appears; what ties them to this record is the position on the page, not anything the passage says.
10.71/SA 75 DS II 80Ni1H4/810X Ni1/800X Ni1/II 81K2 H4 CS 8-Ni2 CW 80 D2
Suggested preheat by thickness, low hydrogen (H8 and less) — the A-D column for this grade's preheat group and Suggested preheat by thickness, hydrogen above H8 — the A-D column for this grade's preheat group
Preheat A B C D Low Hydrogen H8 and less T < .75 70 70 200 300 .75 < T < 1.5 70 125 300 400 1.5 < T < 2.5 150 200 300 400 T > 2.5 225 300 350 500 Hydrogen > H8 T < .75 175 175 NR NR .75 < T < 1.5 225 225 NR NR 1.5 < T < 2.5 275 275 NR NR T > 2.5 300 300 NR NR
— all from assets.esab.com, retrieved 2026-09-16
Source
- assets.esab.comhttps://assets.esab.com/assetbank-esab/assetfile/22174.pdf