A992
For A992, esab preheat group is A; esab-recommended smaw (stick) filler is Group 2, AA 7018/7018 Acclaim; esab-recommended gmaw/gtaw filler is Group 1; esab-recommended saw (submerged arc) filler is Group 1, Group 2; esab-recommended fcaw (gas-shielded flux-cored) filler is Group 1, Group 2, Group 4, recorded from its source on 2026-09-16.
- ASTM specification
- A992 verified
- ESAB preheat group
- A verified
- ESAB-recommended SMAW (stick) filler
- Group 2, AA 7018/7018 Acclaim verified
- ESAB-recommended GMAW/GTAW filler
- Group 1 verified
- ESAB-recommended SAW (submerged arc) filler
- Group 1, Group 2 verified
- ESAB-recommended FCAW (gas-shielded flux-cored) filler
- Group 1, Group 2, Group 4 verified
- ESAB-recommended FCAW (self-shielded flux-cored) filler
- Group 1, Group 2 verified
- ESAB-recommended MCAW (metal-cored) filler
- Group 1 verified
- What that stick group contains
- SW 7024 verified
- What that MIG group contains
- Spoolarc 29S, Spoolarc 82, Spoolarc 86, Spoolarc 87HP, Aristorod 12.50 verified
- What that SAW group contains
- Group 1 Spoolarc 81/OK Flux 231, Spoolarc 81/OK Flux 350, Spoolarc 81/OK Flux 429 Group 2 OK Flux 429 / Spoolarc 81, OK Flux 10.71/Spoolarc 81, OK Flux 10.72/Spoolarc 81, OK Flux 10.62/Spoolarc 81 verified
- What that Coreshield group contains
- Group 1 Coreshield 40, Coreshield 7, Coreshield 11 Group 2 Coreshield 6, Coreshield 8, Coreshield 8 Ni1 H5 verified
- What that metal-cored group contains
- Coreweld 70, Coreweld C-6, Coreweld C-6LF, Coreweld 77HS verified
- Suggested preheat, low hydrogen (H8 and less), by thickness
- T < .75: 70, .75 < T < 1.5: 70, 1.5 < T < 2.5: 150, T > 2.5: 225 our reading
- Suggested preheat, hydrogen above H8, by thickness
- T < .75: 175, .75 < T < 1.5: 225, 1.5 < T < 2.5: 275, T > 2.5: 300 our reading
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
A992 A Group 2, AA 7018/7018 Acclaim Group 1
— assets.esab.com, retrieved 2026-09-16
Where each value comes from
This source states these in separate places, so each value is shown with the passage that states it.
ESAB-recommended SAW (submerged arc) filler, ESAB-recommended FCAW (gas-shielded flux-cored) filler, ESAB-recommended FCAW (self-shielded flux-cored) filler and ESAB-recommended MCAW (metal-cored) filler
Group 1, Group 2 Group 1, Group 2, Group 4 Group 1, Group 2 Group 1
What that stick group contains
Stick Group 1 SW 6010, , SW 10P, SW10P+, SW 6011, SW 6013, SW 7014 Group 2 SW 7024
What that MIG group contains
MIG Group 1 Spoolarc 29S, Spoolarc 82, Spoolarc 86, Spoolarc 87HP, Aristorod 12.50
What that SAW group contains
SAW Group 1 Spoolarc 81/OK Flux 231, Spoolarc 81/OK Flux 350, Spoolarc 81/OK Flux 429 Group 2 OK Flux 429 / Spoolarc 81, OK Flux 10.71/Spoolarc 81, OK Flux 10.72/Spoolarc 81, OK Flux 10.62/Spoolarc 81 Group 3 OK Flux 10.62/Spoolarc 75, OK Flux 10.71/Spoolarc 71, OK Flux 10.72/ Spoolarc 71, OK Flux 10.62/ Spoolarc 71
What that Coreshield group contains
Coreshield Group 1 Coreshield 40, Coreshield 7, Coreshield 11 Group 2 Coreshield 6, Coreshield 8, Coreshield 8 Ni1 H5
What that metal-cored group contains
Metal Cored Group 1 Coreweld 70, Coreweld C-6, Coreweld C-6LF, Coreweld 77HS
Suggested preheat, low hydrogen (H8 and less), by thickness and Suggested preheat, hydrogen above H8, by thickness
Preheat A B C D Low Hydrogen H8 and less T < .75 70 70 200 300 .75 < T < 1.5 70 125 300 400 1.5 < T < 2.5 150 200 300 400 T > 2.5 225 300 350 500 Hydrogen > H8 T < .75 175 175 NR NR .75 < T < 1.5 225 225 NR NR 1.5 < T < 2.5 275 275 NR NR T > 2.5 300 300 NR NR
— all from assets.esab.com, retrieved 2026-09-16
Source
- assets.esab.comhttps://assets.esab.com/assetbank-esab/assetfile/22174.pdf