10 x 1.25 · Metric Fine
For 10 x 1.25 · Metric Fine, thread or drill designation is 10 x 1.25; record type is tap_drill; tap drill or decimal size is 8.75; thread series is Metric Fine, recorded from its source on 2026-08-28; source re-checked 2026-09-15.
- Thread or drill designation
- 10 x 1.25 our reading
- Record type
- tap_drill our reading
- Tap drill or decimal size
- 8.75 verified
- Thread series
- Metric Fine our reading
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
10 x 1.25 | 8.75
— victornet.com, retrieved 2026-08-28
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Tap drill or decimal size
victornet.com says tap drill or decimal size is 8.75, as of 2026-08-28.
10 x 1.25 | 8.75
https://www.victornet.com/reference/Tap_Drill.html
newmantools.com says tap drill or decimal size is 8.8, as of 2026-08-28.
10 x 1.25 8.8
Sources
- victornet.comhttps://www.victornet.com/reference/Tap_Drill.html
- newmantools.comhttps://www.newmantools.com/tapdrill.htm