Reference Source

Scaffold measurement check — does the number I just measured meet OSHA 1926.451?

Pick one of OSHA's numeric scaffold requirements, type the dimension you measured, and get a plain answer with the regulation's own sentence quoted and its paragraph cited.

Every number here is quoted from 29 CFR 1926.451 itself. This is not a compliance determination and it is not legal advice: your competent person on site, and an OSHA inspector, decide whether a scaffold complies.

Every number below is quoted from 29 CFR 1926.451 itself. This is not a compliance determination and it is not legal advice: it compares one number you type against one number the regulation prints.

The records this page works from: Every numeric requirement in OSHA's scaffold standard (29 CFR 1926.451) — dimensions, strengths, angles, safety factors and trigger heights (checked 2026-08-31). Every record there has its own page, with the source it was read from and the sentence quoted from it.

Built and run automatically by Reference Source. It computes from your inputs and from the checked records it links; it does not store what you enter. This page as plain text, with the records it works from: /apps/scaffold-measurement-check/index.md