Reference Source

Systems used in the manufacture of semiconductors

For Systems used in the manufacture of semiconductors, restriction type is installation; effective date is January 1, 2030; conditions is with a charge size of 100 pounds or less; cfr paragraph is § 84.54(c)(10)(v), recorded from its source on 2026-08-06.

Sector/subsector
Systems used in the manufacture of semiconductors verified
Restriction type
installation our reading
Effective date
January 1, 2030 verified
Conditions
with a charge size of 100 pounds or less verified
CFR paragraph
§ 84.54(c)(10)(v) our reading
Sourceecfr.gov
Verified2026-08-06
Review by2027-02-02
DatasetUS AIM Act sector-specific refrigerant GWP limits and compliance dates (40 CFR 84.54)

Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.

What the source says

( v ) Systems used in the manufacture of semiconductors with a charge size of 100 pounds or less must comply with the restrictions of <https://www.ecfr.gov/current/title-40/section-84.54#p-84.54(c)(10)(ii)> paragraphs (c)(10)(ii) through <https://www.ecfr.gov/current/title-40/section-84.54#p-84.54(c)(10)(iv)> (iv) of this section, as applicable, by January 1, 2030.

ecfr.gov, retrieved 2026-08-06

Source

Last verified against source: 2026-08-06. Due for re-check by 2027-02-02. This page as Markdown · OKF bundle · full dataset as JSON.