Withdrawn and superseded ISO standards — page 217 of 246

19752,GUIDE,,ISO/IEC Guide 46:1985,Comparative testing of consumer products and related services — General principles,Essais comparatifs des produits de consommation et de leurs services — Principes généraux,1985-11-01,1,"['19.020','03.080.30']",ISO/COPOLCO,9599,[19723],[39882],"['en','fr']",2,"<p>The principles are applicable to consumer products, services and a combination of both. They may usefully be followed by bodies and associations which conduct comparative testing programmes. The purpose of this Guide is to enable meaningful test results and information to be presented in a way which will help consumers and others to make an informed choice suitable to their own needs. The notes off

19754,GUIDE,,ISO/IEC Guide 48:1986,Guidelines for third-party assessment and registration of a supplier's Quality System,Lignes directrices pour l'évaluation et l'enregistrement par une tierce partie d'un Système Qualité d'un fournisseur,1986-12-01,1,['03.120.20'],ISO/CASCO,9599,,[25251],,,

19755,GUIDE,,ISO/IEC Guide 49:1986,Withdrawn,Annulé,1986-10-01,1,"['03.120.10','03.120.20']",ISO/CASCO,9599,,[19734],,,

19756,GUIDE,,ISO/IEC Guide 50:1987,Child safety and standards — General guidelines,La sécurité des enfants et les normes — Principes directeurs,1987-04-01,1,"['01.120','97.190']",ISO/TMBG,9599,,[32941],"['en','fr']",13,"<p>This Guide establishes basic safety principles for technical bodies preparing national and international standards for products which are intended specifically for use by children; these principles should also apply to products with which children are likely to come into contact. The following aspects are considered: ergonomic considerations, toxicity, flammability and thermal injuries, ingestion and inhalation of foreign bodies, mechanical hazards and construction feature

32941,GUIDE,,ISO/IEC Guide 50:2002,Safety aspects — Guidelines for child safety,Aspects liés à la sécurité — Principes directeurs pour la sécurité des enfants,2002-05-30,2,"['01.120','97.190']",ISO/TMBG,9599,[19756],"[63937,60591]","['en','fr']",29,"<p>This Guide provides a framework for addressing potential sources of unintentional physical harm (hazards) to children from products, processes or services that they use or with which they may come into contact, even if they are not specifically intended for children. The framework aims at minimizing risk of injury to children.</p><p>It is primarily intended for those involved in the preparation and revision of standards. However, it has import

19757,GUIDE,,ISO/IEC Guide 51:1990,Guidelines for the inclusion of safety aspects in standards,Principes directeurs pour inclure dans les normes les aspects liés à la sécurité,1990-12-01,1,['01.120'],ISO/TMBG,9599,,[32893],"['en','fr']",7,

32893,GUIDE,,ISO/IEC Guide 51:1999,Safety aspects — Guidelines for their inclusion in standards,Aspects liés à la sécurité — Principes directeurs pour les inclure dans les normes,1999-12-16,2,['01.120'],ISO/TMBG,9599,[19757],[53940],"['en','fr']",10,

19758,GUIDE,,ISO/IEC Guide 52:1990,Glossary of fire terms and definitions,Glossaire de termes relatifs au feu et de leurs définitions,1990-11-01,1,"['13.220.01','21.220.01']",ISO/TMBG,9599,,[23382],"['en','fr']",30,

19759,GUIDE,,ISO/IEC Guide 53:1988,An approach to the utilization of a supplier's quality system in third party product certification,Une approche de l'utilisation du système qualité d'un fournisseur dans le domaine de la certification des produits par tierce partie,1988-12-01,1,['03.120.20'],ISO/CASCO,9599,,[37036],"['en','fr']",13,"<p>This Guide outlines a general approach by which certification bodies wishing to do so can develop and apply product certification programmes utilizing elements of suppliers' quality systems. The forms of programmes chosen by this guide are for conformity certification of products only. The following steps in developing a programme are considered: the qualific

37036,GUIDE,,ISO/IEC Guide 53:2005,Conformity assessment — Guidance on the use of an organization's quality management system in product certification,Évaluation de la conformité — Lignes directrices sur l'utilisation du système de management de la qualité d'un organisme dans le domaine de la certification des produits,2005-01-26,2,['03.120.20'],ISO/CASCO,9599,[19759],"[61059,63132]","['en','fr']",21,"<p>ISO/IEC Guide 53:2005 outlines a general approach by which certification bodies can develop and apply product certification schemes utilizing requirements of an organization's quality management system. The provisions given are not requirements for the accreditation of a product certificatio

19760,GUIDE,,ISO/IEC Guide 54:1988,Withdrawn,Annulé,1988-12-01,1,['03.120.20'],ISO/CASCO,9599,,[21678],,,

19761,GUIDE,,ISO/IEC Guide 55:1988,Withdrawn,Annulé,1988-12-01,1,['03.120.20'],ISO/CASCO,9599,,[21678],,,

20109,GUIDE,,ISO/IEC Guide 57:1991,Guidelines for the presentation of inspection results,Lignes directrices pour la présentation des résultats de contrôles,1991-11-14,1,['03.120.20'],ISO/CASCO,9599,,[29342],"['en','fr']",3,

21678,GUIDE,,ISO/IEC Guide 58:1993,Calibration and testing laboratory accreditation systems — General requirements for operation and recognition,Systèmes d'accréditation de laboratoires d'essais et d'étalonnages — Prescriptions générales pour la gestion et la reconnaissance,1993-02-11,1,['03.120.20'],ISO/CASCO,9599,"[19761,19744,19760]",[29332],"['en','fr']",6,<p>Sets out the general requirements for the operation of a system for accreditation of calibration and/or testing laboratories so that the accreditations granted and the services covered by the accreditations may be recognized at a national or an international level and the body operating the accreditation system may be recognized at

23390,GUIDE,,ISO/IEC Guide 59:1994,Code of good practice for standardization,Code de bonne pratique pour la normalisation,1994-02-17,1,['01.120'],ISO/TMBG,9599,,[71917],"['en','fr']",6,"<p>Standards are developed by many bodies at national and international levels, which in general prepare their documents by consensus processes. Alongside the growth of international trade and technological cooperation, standardizing bodies have developed procedures and modes of cooperation which are commonly considered to constitute good practices for standard development at all levels. These practices are set out in the form of a code, applicable to governmental and non-governmental consensus bodies. The gu

24493,GUIDE,,ISO/IEC Guide 60:1994,ISO/IEC Code of good practice for conformity assessment,Code de bonne pratique ISO/CEI pour l'évaluation de la conformité,1994-09-08,1,['03.120.20'],ISO/CASCO,9599,[19727],[37035],"['en','fr']",2,"<p>Intended to promote equal rights of access to conformity assessment services worldwide. Presented in a form suitable for use by conformity assessment bodies, whether governmental or non-governmental, at international, regional, national or sub-national level.</p>"

37035,GUIDE,,ISO/IEC Guide 60:2004,Conformity assessment — Code of good practice,Évaluation de la conformité — Code de bonne pratique,2004-09-13,2,['03.120.20'],ISO/CASCO,9599,[24493],[80748],"['ar','en','es','fr']",5,"<p>ISO/IEC Guide 60:2004 recommends good practices for all elements of conformity assessment, including normative documents, bodies, systems, schemes and results.</p><p>It is intended for use by individuals and bodies who wish to provide, promote or use ethical and reliable conformity assessment services. These include, as appropriate, regulators, trade officials, calibration laboratories, testing laboratories, inspection bodies, product certification bodies, management system

25250,GUIDE,,ISO/IEC Guide 61:1996,General requirements for assessment and accreditation of certification/registration bodies,Exigences générales pour l'évaluation et l'accréditation d'organismes de certification/d'enregistrement,1996-04-25,1,['03.120.20'],ISO/CASCO,9599,,[29332],"['en','fr']",12,<p>Contains general requirements for bodies at a national or international level dealing with accreditation systems. Conformity to the requirements of this Guide will promote equivalence of national systems and facilitate agreements on mutual recognition of accreditations between such bodies.</p>

25251,GUIDE,,ISO/IEC Guide 62:1996,General requirements for bodies operating assessment and certification/registration of quality systems,Exigences générales relatives aux organismes gérant l'évaluation et la certification/enregistrement des systèmes qualité,1996-04-25,1,['03.120.20'],ISO/CASCO,9599,[19754],[29343],"['en','fr']",11,<p>Gives general requirements for a third-party body dealing with certification/registration of quality systems has to meet if it is to be recognized as competent and reliable.</p>

25915,GUIDE,,ISO/IEC Guide 63:1999,Guide to the development and inclusion of safety aspects in International Standards for medical devices,Guide pour l'élaboration des aspects de sécurité et leur incorporation dans des Normes internationales relatives aux dispositifs médicaux,1999-02-04,1,"['01.120','11.020']",ISO/TMBG,9599,,[50729],['en'],8,

50729,GUIDE,,ISO/IEC Guide 63:2012,Guide to the development and inclusion of safety aspects in International Standards for medical devices,Guide pour l'élaboration des aspects de sécurité et leur incorporation dans des Normes internationales relatives aux dispositifs médicaux,2012-01-10,2,['11.020.01'],ISO/TMBG,9599,[25915],[67944],"['en','ru']",21,<p>ISO/IEC Guide 63:2012 provides guidance to standards writers on how to include safety aspects in the development of medical device safety standards intended to be used within the risk management framework established in ISO 14971. It expands on the concepts developed in ISO/IEC Guide 51 to include safety-related performance and usability.</p><p

26796,GUIDE,,ISO/IEC Guide 65:1996,General requirements for bodies operating product certification systems,Exigences générales relatives aux organismes procédant à la certification de produits,1996-06-27,1,['03.120.20'],ISO/CASCO,9599,[19746],"[45591,46568]","['en','fr']",8,<p>Specifies general requirements for third-party operating a product certification system. Replaces ISO/IEC Guide 40:1983.</p>

29232,GUIDE,,ISO/IEC Guide 66:1999,General requirements for bodies operating assessment and certification/registration of environmental management systems (EMS),Exigences générales relatives aux organismes gérant l'évaluation et la certification/ enregistrement des systèmes de management environnemental (SME),1999-07-29,1,['13.020.10'],ISO/CASCO,9599,,[29343],"['en','fr']",14,

30258,GUIDE,,ISO/IEC Guide 67:2004,Conformity assessment — Fundamentals of product certification,Évaluation de la conformité — Éléments fondamentaux de la certification de produits,2004-09-13,1,['03.120.20'],ISO/CASCO,9599,,[55087],"['en','fr']",9,"<p>ISO/IEC Guide 67:2004 gives guidance on product certification systems by identifying their various elements based on current practices.</p><p>It is intended for use by product certification bodies and other interested parties wishing to understand, develop, establish or compare third-party product certification systems.</p><p>ISO/IEC Guide 67:2004 is not intended to describe all existing forms of product certification. It does not address first

19718,GUIDE,,ISO/IEC Guide 7:1982,Requirements for standards suitable for product certification,Exigences relatives aux normes destinées à la certification des produits,1982-12-01,1,"['01.120','03.120.20']",ISO/CASCO,9599,,[23361],,,

23361,GUIDE,,ISO/IEC Guide 7:1994,Guidelines for drafting of standards suitable for use for conformity assessment,Lignes directrices pour la rédaction de normes destinées à l'évaluation de la conformité,1994-02-17,2,"['01.120','03.120.20']",ISO/CASCO,9599,[19718],"[29317,42635]","['en','fr']",3,"<p>The aim of this Guide is to assist technical committees in drafting standards in such a way that they are suitable for certification purposes. It must be borne in mind that such standards could also be used for other purposes such as in contractual documents between buyer and seller and the like. For certification purposes a number of aspects with which standards should normally comply, require em

33987,GUIDE,,ISO/IEC Guide 71:2001,Guidelines for standards developers to address the needs of older persons and persons with disabilities,Principes directeurs pour les normalisateurs afin de répondre aux besoins des personnes âgées et de celles ayant des incapacités,2001-11-22,1,"['01.120','11.180.01']",ISO/TMBG,9599,,[57385],"['en','fr']",30,"<p><b>1.1 </b>This Guide provides guidance to writers of relevant International Standards on how to take into account the needs of older persons and persons with disabilities. Whilst recognizing that some people with very extensive and complex disabilities may have requirements beyond the level addressed in this Guide, a very large number of people ha

34998,GUIDE,,ISO/IEC Guide 73:2002,Risk management — Vocabulary — Guidelines for use in standards,Management du risque — Vocabulaire — Lignes directrices pour l'utilisation dans les normes,2002-06-27,1,"['01.120','03.100.01','01.040.03']",ISO/TMBG,9599,,[44651],"['en','fr']",16,

45417,GUIDE,,ISO/IEC Guide 76:2008,Development of service standards — Recommendations for addressing consumer issues,Élaboration des normes de service — Recommandations pour répondre aux attentes des consommateurs,2008-01-16,1,['03.080.01'],ISO/COPOLCO,9599,,[73717],"['en','fr']",32,"<p>ISO/IEC Guide 76:2008 provides general guidance on the issues to be considered in standards for services. On the basis of this guidance, detailed standards can be prepared for any service. ISO/IEC Guide 76:2008 provides a checklist which can be used by consumer representatives and others participating in the process of standards development. Use of the checklist enables full consideration to be given to all m

46383,GUIDE,,ISO/IEC Guide 98-1:2009,Uncertainty of measurement — Part 1: Introduction to the expression of uncertainty in measurement,Incertitude de mesure — Partie 1: Introduction à l'expression de l'incertitude de mesure,2009-08-27,1,['17.020'],ISO/TMBG,9599,,[82708],"['en','fr']",21,"<p>ISO/IEC Guide 98-1:2009 provides a brief introduction to the “Guide to the expression of uncertainty in measurement” (GUM) in order to indicate the relevance of that fundamental guide and promote its use. It also outlines documents related to the GUM that are intended to extend the application of that guide to broader categories and fields of practical problems. </p><p>ISO/IEC Guide 98-1:2009 addresses m

45315,GUIDE,,ISO/IEC Guide 98:1993,Guide to the expression of uncertainty in measurement (GUM),Guide pour l'expression de l'incertitude de mesure (GUM),1993-01-01,1,['17.020'],ISO/TMBG,9599,,[50461],"['en','fr']",105,

63712,IS,,ISO/IEC/IEEE 12207:2017,Systems and software engineering — Software life cycle processes,Ingénierie des systèmes et du logiciel — Processus du cycle de vie du logiciel,2017-11-28,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[43447],[90219],['en'],145,"<p>ISO/IEC/IEEE 12207:2017 also provides processes that can be employed for defining, controlling, and improving software life cycle processes within an organization or a project.</p><p>The processes, activities, and tasks of this document can also be applied during the acquisition of a system that contains software, either alone or in conjunction with ISO/IEC/IEEE 15288:2015, <i>Systems and software engineering?System life cycle processes</i

73567,IS,,ISO/IEC/IEEE 15026-1:2019,Systems and software engineering — Systems and software assurance — Part 1: Concepts and vocabulary,Ingénierie des systèmes et du logiciel — Assurance des systèmes et du logiciel — Partie 1: Concepts et vocabulaire,2019-03-08,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[62526],[89808],['en'],27,"<p>This document defines assurance-related terms and establishes an organized set of concepts and relationships to form a basis for shared understanding across user communities for assurance. It provides information to users of the other parts of ISO/IEC/IEEE 15026 including the combined use of multiple parts. The essential concept introduced by ISO/IEC/IEEE 15026 (all pa

63711,IS,,ISO/IEC/IEEE 15288:2015,Systems and software engineering — System life cycle processes,Ingénierie des systèmes et du logiciel — Processus du cycle de vie du système,2015-05-21,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[43564],[81702],['en'],108,"<p>ISO/IEC/IEEE 15288:2015 establishes a common framework of process descriptions for describing the life cycle of systems created by humans. It defines a set of processes and associated terminology from an engineering viewpoint. These processes can be applied at any level in the hierarchy of a system's structure. Selected sets of these processes can be applied throughout the life cycle for managing and performing the stages of a system's life c

54388,IS,,ISO/IEC/IEEE 15289:2011,Systems and software engineering — Content of life-cycle information products (documentation),Ingénierie des systèmes et du logiciel — Contenu des systèmes et produits d'information du processus de cycle de vie du logiciel (documentation),2011-11-03,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[43790],[66422],['en'],84,"<p>ISO/IEC/IEEE 15289:2011 provides requirements for identifying and planning the specific information items (information products, documentation) to be developed and revised during systems and software life cycles and service processes. It specifies the purpose and content of all identified systems and software data records and life cycle informatio

66422,IS,,ISO/IEC/IEEE 15289:2015,Systems and software engineering — Content of life-cycle information items (documentation),Ingénierie des systèmes et du logiciel — Contenu des articles d'information du cycle de vie (documentation),2015-05-21,2,['35.080'],ISO/IEC JTC 1/SC 7,9599,[54388],[71950],['en'],84,"<p>ISO/IEC/IEEE 15289:2015 provides requirements for identifying and planning the specific information items (information products, documentation) to be developed and revised during systems and software life cycles and service processes. It specifies the purpose and content of all identified systems and software data records and life-cycle information items, as well as records and informat

71950,IS,,ISO/IEC/IEEE 15289:2017,Systems and software engineering — Content of life-cycle information items (documentation),Ingénierie des systèmes et du logiciel — Contenu des articles d'information du cycle de vie (documentation),2017-06-01,3,['35.080'],ISO/IEC JTC 1/SC 7,9599,[66422],[74909],['en'],88,"<p>ISO/IEC/IEEE 15289:2017 specifies the purpose and content of all identified systems and software life-cycle and service management information items (documentation). The information item contents are defined according to generic document types, as presented in Clause 7, and the specific purpose of the document (Clause 10).</p><p>ISO/IEC/IEEE 15289:2017 assumes an organization is perform

41977,IS,,ISO/IEC/IEEE 16326:2009,Systems and software engineering — Life cycle processes — Project management,Ingénierie du logiciel — Processus de cycle de vie — Gestion de projet,2009-12-07,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[30930],[75276],['en'],32,"<p>ISO/IEC/IEEE 16326:2009 provides normative content specifications for project management plans covering software projects, and software-intensive system projects. It also provides detailed discussion and advice on applying a set of project processes that are common to both the software and system life cycle as covered by ISO/IEC 12207:2008 (IEEE Std 12207-2008) and ISO/IEC 15288:2008 (IEEE Std 15288-2008), respectively. The discussion a

62440,IS,,ISO/IEC/IEEE 23026:2015,"Systems and software engineering — Engineering and management of websites for systems, software, and services information","Ingénierie des systèmes et du logiciel — Ingénierie et gestion de sites web pour les systèmes, logiciels et services d'information",2015-05-21,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[41294],[81896],['en'],46,"<p>ISO/IEC/IEEE 23026:2015 defines system engineering and management requirements for the life cycle of websites, including strategy, design, engineering, testing and validation, and management and sustainment for Intranet and Extranet environments. The goal of ISO/IEC/IEEE 23026:2015 is to improve the usability of informational web

72896,IS,,ISO/IEC/IEEE 24748-1:2018,Systems and software engineering — Life cycle management — Part 1: Guidelines for life cycle management,Ingénierie des systèmes et du logiciel — Gestion du cycle de vie — Partie 1: Lignes directrices pour la gestion du cycle de vie,2018-10-31,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[69655],[84709],['en'],72,"<p>This document provides guidelines for the life cycle management of systems and software, complementing the processes described in ISO/IEC/IEEE 15288 and ISO/IEC/IEEE 12207. This document:</p><p>— addresses systems concepts and life cycle concepts, models, stages, processes, process application, key points of view, adaptation and use in various

70816,IS,,ISO/IEC/IEEE 24748-2:2018,Systems and software engineering — Life cycle management — Part 2: Guidelines for the application of ISO/IEC/IEEE 15288 (System life cycle processes),Ingénierie des systèmes et du logiciel — Gestion du cycle de vie — Partie 2: Lignes directrices pour l'application de l'ISO/IEC/IEEE 15288 (Processus du cycle de vie du système),2018-12-12,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[54994],[84661],['en'],64,"<p>This document is a guideline for the application of ISO/IEC/IEEE 15288:2015. It addresses system, life cycle, organizational, project, and process, concept application, principally through reference to ISO/IEC/IEEE 24748‑1 and ISO/IEC/IEEE 15288:2015. It giv

56887,IS,,ISO/IEC/IEEE 24748-4:2016,Systems and software engineering — Life cycle management — Part 4: Systems engineering planning,Ingénierie des systèmes — Gestion du cycle de vie — Partie 4: Ingénierie des systèmes,2016-05-17,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[43693],[87797],['en'],62,"<p>The evolution of the harmonized set of ISO/IEC/IEEE 15288-12207 related</p><p>standards and technical reports that are discussed in this International Standard</p><p>provides detailed requirements and guidance on the application of system life cycle</p><p>processes. This International Standard unifies technical and management</p><p>requirements and guidance from several of these sources to specify the

75404,IS,,ISO/IEC/IEEE 24748-7:2019,Systems and software engineering — Life cycle management — Part 7: Application of systems engineering on defense programs,Ingénierie des systèmes et du logiciel — Gestion du cycle de vie — Partie 7: Application de l'ingénierie des systèmes aux programmes de défense,2019-02-06,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[90139],['en'],51,"<p>This document establishes the requirements for systems engineering activities to be performed on projects of the United States (US) Department of Defense (DoD) and other defense agencies across the entire system life cycle, including the planning, acquisition, modification, and sustainment of defense systems. It provides the

50518,IS,,ISO/IEC/IEEE 24765:2010,Systems and software engineering — Vocabulary,Ingénierie des systèmes et du logiciel — Vocabulaire,2010-12-15,1,"['01.040.35','35.080']",ISO/IEC JTC 1/SC 7,9599,,[71952],['en'],410,"<p>ISO/IEC/IEEE 24765:2010 provides a common vocabulary applicable to all systems and software engineering work. It was prepared to collect and standardize terminology. ISO/IEC/IEEE 24765:2010 is intended to serve as a useful reference for those in the information technology field, and to encourage the use of systems and software engineering standards prepared by ISO and liaison organizations IEEE Computer Society and Project Management Institute. ISO/IEC/IEEE 24765:2010 includes

43070,IS,,ISO/IEC/IEEE 26511:2011,Systems and software engineering — Requirements for managers of user documentation,Ingénierie des systèmes et du logiciel — Exigences pour les gestionnaires de la documentation d'utilisation,2011-11-24,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[37460],[70879],['en'],45,"<p>ISO/IEC 26511:2011 specifies procedures for managing user documentation throughout the software life cycle. It applies to people or organizations producing suites of documentation, to those undertaking a single documentation project, and to documentation produced internally, as well as to documentation contracted to outside service organizations. It provides an overview of the software document

43071,IS,,ISO/IEC/IEEE 26512:2011,Systems and software engineering — Requirements for acquirers and suppliers of user documentation,Ingénierie du logiciel et des systèmes — Exigences pour acquéreurs et fournisseurs de documentation utilisateur,2011-05-19,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[29509],[72088],['en'],37,"<p>ISO/IEC/IEEE 26512:2011 was developed to assist users of ISO/IEC 15288:2008 or ISO/IEC 12207:2008 to acquire or supply software user documentation as part of the software life cycle processes. It defines the documentation process from the acquirer's standpoint and the supplier's standpoint. ISO/IEC/IEEE 26512:2011 covers the requirements for information items used in the acqu

43074,IS,,ISO/IEC/IEEE 26515:2011,Systems and software engineering — Developing user documentation in an agile environment,Ingénierie du logiciel et des systèmes — Développement de la documentation de l'utilisateur dans un environnement agile,2011-11-24,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[70880],['en'],27,"<p>ISO/IEC 26515:2011 specifies the way in which user documentation can be developed in agile development projects. It is intended for use in all organizations that are using agile development, or are considering implementing their projects using these techniques. It applies to people or organizations producing suites of documentation, to those undertaking a single documentation project

43090,IS,,ISO/IEC/IEEE 26531:2015,"Systems and software engineering — Content management for product life-cycle, user and service management documentation","Ingénierie des systèmes et du logiciel — Gestion de contenu relatif a la documentation du cycle de vie du produit, de l'utilisateur, et de la gestion de service",2015-05-21,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[81703],['en'],49,"<p>ISO/IEC/IEEE 26531:2015 states requirements for efficient development and management of content produced</p><ul><li>throughout the life-cycle of a system and software product;</li><li>for the provision of user documentation for systems and software;</li><li>for the management of IT services.</li></ul><p>ISO/I

45142,IS,,ISO/IEC/IEEE 29119-1:2013,Software and systems engineering — Software testing — Part 1: Concepts and definitions,Ingénierie du logiciel et des systèmes — Essais du logiciel — Partie 1: Concepts et définitions,2013-08-29,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[81291],['en'],56,"<p>The purpose of the ISO/IEC/IEEE 29119 series of software testing standards is to define an internationally-agreed set of standards for software testing that can be used by any organization when performing any form of software testing. ISO/IEC/IEEE 29119-1:2013 facilitates the use of the other ISO/IEC/IEEE 29119 standards by introducing the concepts and vocabulary on which these standards are built, as well

56736,IS,,ISO/IEC/IEEE 29119-2:2013,Software and systems engineering — Software testing — Part 2: Test processes,Ingénierie du logiciel et des systèmes — Essais du logiciel — Partie 2: Processus des essais,2013-08-29,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[79428],['en'],59,"<p>The purpose of the ISO/IEC/IEEE 29119 series of software testing standards is to define an internationally-agreed set of standards for software testing that can be used by any organization when performing any form of software testing. ISO/IEC/IEEE 29119-2:2013 comprises test process descriptions that define the software testing processes at the organizational level, test management level and dynamic test levels. It supp

56737,IS,,ISO/IEC/IEEE 29119-3:2013,Software and systems engineering — Software testing — Part 3: Test documentation,Ingénierie du logiciel et des systèmes — Essais du logiciel — Partie 3: Documentation des essais,2013-08-29,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[79429],['en'],127,"<p>The purpose of the ISO/IEC/IEEE 29119 series of software testing standards is to define an internationally-agreed set of standards for software testing that can be used by any organization when performing any form of software testing.</p><p>ISO/IEC/IEEE 29119-3:2013 includes templates and examples of test documentation. The templates are arranged within clauses reflecting the overall test process description st

60245,IS,,ISO/IEC/IEEE 29119-4:2015,Software and systems engineering — Software testing — Part 4: Test techniques,Ingénierie du logiciel et des systèmes — Essais du logiciel — Partie 4: Techniques d'essai,2015-12-03,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[79430],['en'],139,"<p>ISO/IEC/IEEE 29119-4:2015 defines test design techniques that can be used during the test design and implementation process that is defined in ISO/IEC/IEEE 29119‑2.</p><p>ISO/IEC/IEEE 29119-4:2015 is intended for, but not limited to, testers, test managers, and developers, particularly those responsible for managing and implementing software testing.</p>"

62821,IS,,ISO/IEC/IEEE 29119-5:2016,Software and systems engineering — Software testing — Part 5: Keyword-Driven Testing,Ingénierie du logiciel et des systèmes — Essais du logiciel — Partie 5: Essais axés sur des mots-clés,2016-11-17,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[87233],['en'],54,"<p>ISO/IEC/IEEE 29119-5:2016 defines an efficient and consistent solution for Keyword-Driven Testing by:</p><ul><li> giving an introduction to Keyword-Driven Testing;</li><li> providing a reference approach to implement Keyword-Driven Testing;</li><li> defining requirements on frameworks for Keyword-Driven Testing to enable testers to share their work items, such as test cases, test data, ke

45171,IS,,ISO/IEC/IEEE 29148:2011,Systems and software engineering — Life cycle processes — Requirements engineering,Ingénierie des systèmes et du logiciel — Processus du cycle de vie — Ingénierie des exigences,2011-11-24,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[72089],['en'],83,"<p>ISO/IEC/IEEE 29148:2011 contains provisions for the processes and products related to the engineering of requirements for systems and software products and services throughout the life cycle. It defines the construct of a good requirement, provides attributes and characteristics of requirements, and discusses the iterative and recursive application of requirements processes throughout the life cycle. ISO/IEC/IEEE 2

81913,IS,,ISO/IEC/IEEE 32430:2021,Software engineering — Trial use standard for software non-functional sizing measurements,Ingénierie du logiciel — Norme expérimentale pour la quantification des caractéristiques non fonctionnelles des logiciels,2021-10-12,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[86303],['en'],76,"<p>This document defines a method for the sizing of non-functional software requirements. It complements ISO/ IEC 20926:2009, which defines a method for the sizing of functional user requirements (FUR).1</p><p>This document also describes the complementarity of functional and non-functional sizes, so that sizing both functional and non-functional requirements (NFR) do not overlap. It

75341,IS,,ISO/IEC/IEEE 41062:2019,Software engineering — Recommended practice for software acquisition,Ingénierie du logiciel — Pratique recommandée pour l'acquisition des logiciels,2019-02-06,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[81503],['en'],56,"<p>This recommended practice describes a set of useful quality considerations that can be selected and applied during one or more steps in a software acquisition process. The recommended practices can be applied to software that runs on any computer system regardless of the size, complexity, or criticality of the software. The software supply chain may include integration of commercial-off-the-shelf (COTS), custom, or free and open source softwar

50508,IS,,ISO/IEC/IEEE 42010:2011,Systems and software engineering — Architecture description,Ingénierie des systèmes et des logiciels — Description de l'architecture,2011-11-24,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[45991],[74393],['en'],37,"<p>ISO/IEC/IEEE 42010:2011 addresses the creation, analysis and sustainment of architectures of systems through the use of architecture descriptions. A conceptual model of architecture description is established. The required contents of an architecture description are specified. Architecture viewpoints, architecture frameworks and architecture description languages are introduced for codifying conventions and common practices of architecture description

57469,IS,,ISO/IEC/IEEE 60559:2011,Information technology — Microprocessor Systems — Floating-Point arithmetic,Technologies de l'information — Systèmes de microprocesseurs — Arithmétique flottante,2011-07-07,1,['35.160'],ISO/IEC JTC 1/SC 25,9599,[19706],[80985],['en'],58,"<div><p>ISO/IEC/IEEE 60559:2011(E) specifies formats and methods forfloating-point arithmetic in computer systems - standard and extended functionswith single, double, extended, and extendable precision and recommends formatsfor data interchange. Exception conditions are defined and standard handling ofthese conditions is specified. It provides a method for computation withfloating-point numbers that will yield the same resu

53588,IS,,ISO/IEC/IEEE 80005-1:2012,Utility connections in port — Part 1: High Voltage Shore Connection (HVSC) Systems — General requirements,Alimentation des navires à quai — Partie 1: Systèmes de connexion à quai à haute tension — Exigences générales,2012-07-13,1,['47.020.60'],ISO/TC 8/SC 3,9599,[53587],[64717],['en'],57,"IEC/ISO/IEEE 80005-1:2012(E) describes high voltage shore connection (HVSC) systems, on board the ship and on shore, to supply the ship with electrical power from shore. This standard is applicable to the design, installation and testing of HVSC systems and addresses:<br/> - HV shore distribution systems;<br/> - shore-to-ship connection

62000,IS,,ISO/IEC/IEEE 8802-11:2012,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY),2012-11-05,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,"[41477,41243,39777,41476]","[73367,63862]",['en'],2699,"<p>ISO/IEC/IEEE 8802-11:2012 defines one medium access control (M

64600,IS,Amd,ISO/IEC/IEEE 8802-11:2012/Amd 1:2014,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 1: Prioritization of management frames (adoption of IEEE Std 802-11ae-2012),Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) — Amendement 1: Hiérarchisation des cadres de gestion (adoption de l

64601,IS,Amd,ISO/IEC/IEEE 8802-11:2012/Amd 2:2014,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 2: MAC enhancements for robust audio video streaming (adoption of IEEE Std 802.11aa-2012),Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) — Amendement 2: Améliorations du MAC pour une lecture

64876,IS,Amd,ISO/IEC/IEEE 8802-11:2012/Amd 3:2014,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 3: Enhancements for very high throughput in the 60 GHz band (adoption of IEEE Std 802.11ad-2012),Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) — Amendement 3: Améliorations pour un très haut

68412,IS,Amd,ISO/IEC/IEEE 8802-11:2012/Amd 4:2015,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 4,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) — Amendement 4,2015-08-25,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[73367],['en'],395,

68413,IS,Amd,ISO/IEC/IEEE 8802-11:2012/Amd 5:2015,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 5,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) — Amendement 5,2015-08-25,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[73367],['en'],176,

73367,IS,,ISO/IEC/IEEE 8802-11:2018,Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications,Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY),2018-05-09,2,['35.110'],ISO/IEC JTC 1/SC 6,9599,"[64601,62000,68413,64876,68412,64600]",[83242],['en'],3532,"<p>The scope of this standard is to define one medium access control (MAC) and several physical layer (PHY) specificati

73368,IS,Amd,ISO/IEC/IEEE 8802-11:2018/Amd 1:2019,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 1: Fast initial link setup,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) — Amendement 1: Configuration de liaison initiale rapide,2019-02-14,2,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[83242],['e

74310,IS,Amd,ISO/IEC/IEEE 8802-11:2018/Amd 2:2019,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 2: Sub 1 GHz license exempt operation,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) — Amendement 2: Fonctionnement sans licence dans les bandes de fréquences inférieures à 1 GHz,2019-03-28,

77967,IS,Amd,ISO/IEC/IEEE 8802-11:2018/Amd 3:2020,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 3: Enhancements for very high throughput to support Chinese millimeter wave frequency bands (60 GHz and 45 GHz),Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) — Amendement 3: Améliorations pour un très haut débit afin de prendre

77968,IS,Amd,ISO/IEC/IEEE 8802-11:2018/Amd 4:2020,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 4: Enhancements for transit links within bridged network,Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) — Amendement 4: Améliorations pour les liaisons de transit dans un réseau ponté,2020-08-21,2,['35.110'],ISO/IEC JTC 1/SC 6,9

77969,IS,Amd,ISO/IEC/IEEE 8802-11:2018/Amd 5:2020,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 5: Preassociation discovery,Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) — Amendement 5: Découverte de pré-association,2020-08-21,2,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[83242],['en'],52,

56016,IS,,ISO/IEC/IEEE 8802-15-4:2010,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs),Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 15-4: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) pour les réseaux personnels sans fil de faible débit (WPAN),2010-10-14,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[73370

73370,IS,,ISO/IEC/IEEE 8802-15-4:2018,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs),Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 15-4: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) pour les réseaux personnels sans fil de faible débit (WPAN),2018-03-08,2,['35.110'],ISO/IEC JTC 1/SC 6,9599,[56016]

64107,IS,,ISO/IEC/IEEE 8802-1AB:2014,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1AB: Station and media access control connectivity discovery,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Partie 1AB: Découverte de connectivité des stations et du contrôle d'accès aux supports,2014-02-07,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[72047],['en'],193,<p>ISO/IEC/IEEE 8802-1AB:2014 defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in ISO/IEC/IEEE 8802 local area

63255,IS,,ISO/IEC/IEEE 8802-1AE:2013,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1AE: Media access control (MAC) security,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Partie 1AE: Sécurité du contrôle d'accès aux supports (MAC),2013-11-26,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78102],['en'],144,"<p>ISO/IEC/IEEE 8802-1AE:2013 specifies how all or part of a network can be secured transparently to peer protocol entities that use the MAC Service provided by IEEE 802 local area networks (LANs) to communicate. MAC security (MACsec)

67004,IS,Amd,ISO/IEC/IEEE 8802-1AE:2013/Amd 1:2015,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1AE: Media access control (MAC) security — Amendment 1: Galois Counter Mode— — Advanced Encryption Standard-256 (GCM-AES-256) Cipher Suite,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Partie 1AE: Sécurité du contrôle d'accès aux supports (MAC) — Amendement 1: .,2015-04-28,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78102],['en'],38,

67005,IS,Amd,ISO/IEC/IEEE 8802-1AE:2013/Amd 2:2015,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1AE: Media access control (MAC) security — Amendment 2: Extended Packet Numbering,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Partie 1AE: Sécurité du contrôle d'accès aux supports (MAC) — Amendement 2: .,2015-04-28,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78102],['en'],53,

74283,IS,Amd,ISO/IEC/IEEE 8802-1AE:2013/Amd 3:2018,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1AE: Media access control (MAC) security — Amendment 3: Ethernet data encryption devices,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Partie 1AE: Sécurité du contrôle d'accès aux supports (MAC) — Amendement 3: Titre manque,2018-10-18,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78102],['en'],127,

64109,IS,,ISO/IEC/IEEE 8802-1AR:2014,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1AR: Secure device identity,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Partie 1AR: Identité de dispositif sécurisé,2014-02-07,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[76650],['en'],68,"<p>A secure device identifier (DevID) is a cryptographic identity bound to a device used for assertion of the device's identity. ISO/IEC/IEEE 8802-1AR:2014 specifies</p><ul><li>globally unique per-device identifiers and the management and cryptographic binding of

64110,IS,,ISO/IEC/IEEE 8802-1AS:2014,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networks,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Partie 1AS: Temporisation et synchronisation pour les applications sensibles au temps des réseaux locaux pontés,2014-02-07,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[81679],['en'],277,"<p>ISO/IEC/IEEE 8802-1AS:2014 defines a protocol and procedures for the transport of timing over bridged and virtual bridged loc

69145,IS,,ISO/IEC/IEEE 8802-1AX:2016,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1AX: Link aggregation,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1AX: Agrégation de lien,2016-01-14,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[81680],['en'],320,"<p>Link Aggregation provides protocols, procedures, and managed objects that allow the following:</p><p>- One or more parallel instances of full-duplex point-to-point links to be aggregated together to form a Link Aggregation Group (L

73718,IS,Cor,ISO/IEC/IEEE 8802-1AX:2016/Cor 1:2018,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1AX: Link aggregation — Technical Corrigendum 1: Technical and editorial corrections,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1AX: Agrégation de lien — Rectificatif technique 1: .,2018-09-19,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[81680],['en'],111,

70893,IS,,ISO/IEC/IEEE 8802-1BA:2016,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1BA: Audio video bridging (AVB) systems,Technologies de l'information — Télécommunications et échange d'informations entre systèmes — Réseaux de zones locales et métropolitaines — Exigences spécifiques — Partie 1BA: Systèmes de pontage audio-vidéo (AVB),2016-10-06,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[85353],['en'],31,"<p>Profiles that select features, options, configurations, defaults, protocols and procedures of bridges, stations and LANs that are necessary to build networks that are capable of trans

69464,IS,,ISO/IEC/IEEE 8802-1Q:2016,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1Q: Ponts et réseaux pontés,2016-03-11,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78103],['en'],1800,"<p>ISO/IEC/IEEE 8802-1Q:2016 Bridges that interconnect individual LANs, each supporting the IEEE 802 MAC Service using a different or identical media access control method, to provide Bridged Networks and VLANs.</p>" 69

71548,IS,Amd,ISO/IEC/IEEE 8802-1Q:2016/Amd 1:2017,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Amendment 1: Path control and reservation,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1Q: Ponts et réseaux pontés — Amendement 1: Contrôle d'acheminement et réservation,2017-08-07,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78103],['en'],105,

71708,IS,Amd,ISO/IEC/IEEE 8802-1Q:2016/Amd 2:2018,"Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Amendment 2: Application virtual local area network (VLAN) type, length, value (TLV)","Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1Q: Ponts et réseaux pontés — Amendement 2: Type, longueur, valeur (TLV) pour applications de réseaux locaux virtuels (VLAN)",2018-01-08,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78103],['en'],89,

71709,IS,Amd,ISO/IEC/IEEE 8802-1Q:2016/Amd 3:2017,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Amendment 3: Enhancements for scheduled traffic,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1Q: Ponts et réseaux pontés — Amendement 3: Améliorations pour le trafic programmé,2017-08-07,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78103],['en'],55,

72885,IS,Amd,ISO/IEC/IEEE 8802-1Q:2016/Amd 4:2017,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Amendment 4: Frame preemption,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1Q: Ponts et réseaux pontés — Amendement 4: Préemption de trame,2017-11-29,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78103],['en'],51,

72886,IS,Amd,ISO/IEC/IEEE 8802-1Q:2016/Amd 5:2017,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Amendment 5: Enhancements to bridging of IEEE 802.11 media,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1Q: Ponts et réseaux pontés — Amendement 5: Améliorations en vue de ponter les supports IEEE 802.11,2017-11-29,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78103],['en'],24,

74777,IS,Amd,ISO/IEC/IEEE 8802-1Q:2016/Amd 6:2019,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Amendment 6: Per-stream filtering and policing,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1Q: Ponts et réseaux pontés — Amendement 6: Régulation & filtrage par flux,2019-02-14,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78103],['en'],63,

76459,IS,Amd,ISO/IEC/IEEE 8802-1Q:2016/Amd 7:2019,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Amendment 7: Cyclic queuing and forwarding,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1Q: Ponts et réseaux pontés — Amendement 7: Mise en file d'attente et transfert par cycle,2019-02-14,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78103],['en'],28,

73498,IS,Cor,ISO/IEC/IEEE 8802-1Q:2016/Cor 1:2017,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Technical Corrigendum 1: Technical and editorial corrections,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1Q: Ponts et réseaux pontés — Rectificatif technique 1: Corrections techniques et rédactionnelles,2017-11-06,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[78103],['en'],109,

78103,IS,,ISO/IEC/IEEE 8802-1Q:2020,Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 1Q: Bridges and bridged networks,Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 1Q: Ponts et réseaux pontés,2020-08-21,2,['35.110'],ISO/IEC JTC 1/SC 6,9599,"[71548,76459,72885,73498,74777,71709,69464,72886,71708]",[86733],['en'],1931,"<p>This document specifies Bridges that interconnect individual LANs, each supporting the IEEE 802 MAC</p><p>Service using a different or identical media access control method, to provide Bridged Networks and</p><p>VLANs

82092,IS,Amd,ISO/IEC/IEEE 8802-1Q:2020/Amd 2:2021,Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 1Q: Bridges and bridged networks — Amendment 2: YANG data model,Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 1Q: Ponts et réseaux pontés — Amendement 2,2021-09-13,2,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[86733],['en'],80,

82093,IS,Amd,ISO/IEC/IEEE 8802-1Q:2020/Amd 3:2021,Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 1Q: Bridges and bridged networks — Amendment 3: Virtual station interface (VSI) discovery and configuration protocol (VDP) extension to support network virtualization overlays over layer 3 (NVO3),Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 1Q: Ponts et réseaux pontés — Amendement 3: Extension du protocole de détection et de configuration (VDP) d’interface de station virtuelle (VSI) pour prise en charge des superpositions de virtualisa

82680,IS,Amd,ISO/IEC/IEEE 8802-1Q:2020/Amd 31:2021,Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 1Q: Bridges and bridged networks — Amendment 31: Stream Reservation Protocol (SRP) enhancements and performance improvements,Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 1Q: Ponts et réseaux pontés — Amendement 31: Perfectionnement et améliorations des performances du protocole de réservation de flux (SRP),2021-10-29,2,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[86733],['en'],193,

63254,IS,,ISO/IEC/IEEE 8802-1X:2013,Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 1X: Port-based network access control,Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 1X: Contrôle d'accès au réseau basé sur le port,2013-11-26,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[82672],['en'],207,"<p>Port-based network access control allows a network administrator to restrict the use of IEEE 802 local area network (LAN) service access points (ports) to secure communication between authenticated and authorized devices. ISO/IEC/IEEE 8802-1X:2013 sp

69350,IS,Amd,ISO/IEC/IEEE 8802-1X:2013/Amd 1:2016,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1X: Port-based network access control — Amendment 1: MAC security key agreement protocol (MKA) extensions,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1X: Contrôle d'accès au réseau basé sur le port — Amendement 1: Extensions du protocole d'accord de clés de sécurité MAC,2016-02-11,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[82672],['en'],91,

78104,IS,Amd,ISO/IEC/IEEE 8802-1X:2013/Amd 2:2020,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1X: Port-based network access control — Amendment 2: YANG data model,Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 1X: Contrôle d'accès au réseau basé sur le port — Amendement 2: Modèle de données YANG,2020-11-09,1,['35.110'],ISO/IEC JTC 1/SC 6,9599,,[82672],['en'],129,

67402,IS,,ISO/IEC/IEEE 8802-22:2015,Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 22: Spécifications du contrôle d'accès du milieu sans fil cognitif (MAC) et de la couche physique (PHY) : Politiques et procédures pour le fonctionnement dans les bandes TV,2015-04-28,1,['35.110'],ISO