Withdrawn and superseded ISO standards — page 209 of 246

62816,IS,,ISO/IEC 38500:2015,Information technology — Governance of IT for the organization,Technologies de l'information — Gouvernance des technologies de l'information pour l'entreprise,2015-02-11,2,['35.020'],ISO/IEC JTC 1/SC 40,9599,[51639],[81684],['en'],12,"<div id='MathJax_Message' style='display: none;'></div><p>ISO/IEC 38500:2015 provides guiding principles for members of governing bodies of organizations (which can comprise owners, directors, partners, executive managers, or similar) on the effective, efficient, and acceptable use of information technology (IT) within their organizations.</p><p>It also provides guidance to those advising, informing, or assisting governing bodies. T

58625,IS,,ISO/IEC 40500:2012,Information technology — W3C Web Content Accessibility Guidelines (WCAG) 2.0,Technologies de l'information — Règles pour l'accessibilité des contenus Web (WCAG) 2.0,2012-10-12,1,['35.080'],ISO/IEC JTC 1,9599,,[91029],['en'],2,"<p>ISO/IEC 40500:2012 [Web Content Accessibility Guidelines (WCAG) 2.0] covers a wide range of recommendations for making Web content more accessible. Following these guidelines will make content accessible to a wider range of people with disabilities, including blindness and low vision, deafness and hearing loss, learning disabilities, cognitive limitations, limited movement, speech disabilities, photo-sensitivity and combinations of these

45991,IS,,ISO/IEC 42010:2007,Systems and software engineering — Recommended practice for architectural description of software-intensive systems,Ingénierie des logiciels et des systèmes — Pratique recommandée pour la description architecturale des systèmes exigeant beaucoup de logiciels,2007-07-10,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[50508],['en'],23,"<p>ISO/IEC 42010:2007 addresses the activities of the creation, analysis and sustainment of architectures of software-intensive systems, and the recording of such architectures in terms of architectural descriptions. ISO/IEC 42010:2007 establishes a conceptual framework for architectural description and defines the content of an architectural

10211,IS,,ISO/IEC 4335:1991,Information technology —- Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Elements of procedures,Technologies de l'information — Télécommunications et échanges d'information entre systèmes — Procédures de commande de liaison de données à haut niveau (HDLC) — Éléments de procédures,1991-09-26,4,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,"[10216,10210]",[22827],['en'],45,

22827,IS,,ISO/IEC 4335:1993,Information technology —- Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Elements of procedures,Technologies de l'information — Télécommunications et échange d'informations entre systèmes — Procédures de commande de liaison de données à haut niveau (HDLC) — Éléments de procédures,1993-12-23,5,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,[10211],[37010],['en'],42,"<p>Specifies elements of data link control procedures for synchronous or start/stop, code-transparent data transmission using the HDLC frame structure specified in ISO/IEC 3309 and independent frame numbering in both directions. These HDLC elements

20928,IS,Amd,ISO/IEC 4335:1993/Amd 6:1995,Information technology —- Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Elements of procedures — Amendment 6: Extension of HDLC sequence number modulus beyond 128,Technologies de l'information — Télécommunications et échange d'informations entre systèmes — Procédures de commande de liaison de données à haut niveau (HDLC) — Éléments de procédures — Amendement 6: Extension du module du numéro de séquence HDLC au-delà de 128,1995-11-16,5,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[37010],['en'],12,<p>This amendment increases the modulus number (i.e. the sequence number) in steps up to a maximu

24075,IS,Amd,ISO/IEC 4335:1993/Amd 7:1995,Information technology —- Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Elements of procedures — Amendment 7: Enhanced multi-selective reject option,Technologies de l'information — Télécommunications et échange d'informations entre systèmes — Procédures de commande de liaison de données à haut niveau (HDLC) — Éléments de procédures — Amendement 7: Option de rejet à choix multiples améliorée,1995-11-16,5,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[37010],['en'],6,<p>Extends the multi-selective reject option by including a streamlined and detailed set of procedures that do not generate duplic

36266,IS,,ISO/IEC 5218:2004,Information technology — Codes for the representation of human sexes,Technologies de l'information — Codes de représentation des sexes humains,2004-07-08,1,['35.040.50'],ISO/IEC JTC 1/SC 32,9599,[11219],[81682],"['en','fr']",17,"<p>ISO/IEC 5218:2004 specifies a uniform representation of human sexes for the interchange of information. It provides a set of numeric codes that are independent of language-derived codes and as such is intended to provide a common basis for the international exchange of information containing human sex data.</p><p>In providing numeric codes for the representation of human sexes, ISO/IEC 5218:2004 aims to:</p><ul><li>reduce the time requi

81872,IS,,ISO/IEC 5965:2021,Information technology — Swordfish Scalable Storage Management API Specification,Titre manque,2021-08-24,1,['35.020'],ISO/IEC JTC 1,9599,,[85559],['en'],190,"<p>This document defines the Swordfish Scalable Storage Management API.</p><p>Swordfish extends the Redfish Scalable Platforms Management API Specification, as defined by ISO 30115. It defines a comprehensive, RESTful API for storage management that addresses block storage, file systems, object storage, and storage network infrastructure. It is centered around common operational and business concerns of storage management, including:</p><ul><li>Configuration and provisioning</li><li>Monitoring</li><li>Event a

12624,IS,,ISO/IEC 6329:1989,Duplicators and document copying machines — Symbols,Duplicateurs et machines à reproduire les documents — Symboles,1989-06-29,1,"['37.100.10','01.080.20']",ISO/IEC JTC 1,9599,,[21486],"['en','fr']",15,"<p>Provides the symbols which shall be used for the marking of controls, indicator panels and certain other parts of duplicators and document copying machines for assisting users in operating and maintaining the machines.</p>"

25773,IS,,ISO/IEC 6523-1:1998,Information technology — Structure for the identification of organizations and organization parts — Part 1: Identification of organization identification schemes,Technologies de l'information — Structure pour l'identification des organisations et des parties d'organisations — Partie 1: Identification des systèmes d'identification d'organisations,1998-12-20,1,['35.040.50'],ISO/IEC JTC 1/SC 32,9599,"[12908,22323]","[82246,38582]","['en','fr']",8,"<p><b>1.1 </b>This part of ISO/IEC 6523 specifies a structure for globally and unambiguously identifying organizations, and parts thereof,</p><p>for the purpose of information interchange.</p><p>This part of ISO/IEC 6523

25774,IS,,ISO/IEC 6523-2:1998,Information technology — Structure for the identification of organizations and organization parts — Part 2: Registration of organization identification schemes,Technologies de l'information — Structure pour l'identification des organisations et des parties d'organisations — Partie 2: Enregistrement des systèmes d'identification d'organisations,1998-12-20,1,['35.040.50'],ISO/IEC JTC 1/SC 32,9599,"[12908,22323]","[38583,82247,89595]","['en','fr']",6,"<p>This part of ISO/IEC 6523 specifies the procedure for registration of organization identification schemes, and the requirements</p><p>for the administration of International Code Designator values, to designate the

26732,IS,,ISO/IEC 6592:2000,Information technology — Guidelines for the documentation of computer-based application systems,Technologies de l'information — Principes généraux relatifs à la documentation des systèmes d'application informatisés,2000-03-16,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,[13000],[43073],['en'],31,

13465,IS,,ISO/IEC 6937:1994,Information technology — Coded graphic character set for text communication — Latin alphabet,Technologies de l'information — Jeu de caractères graphiques codés pour la transmission de texte — Alphabet latin,1994-06-02,2,['35.040.10'],ISO/IEC JTC 1/SC 2,9599,"[13467,13468,13466]",[31393],['en'],42,"<p>Specifies the coded representation of the characters, a repertoire of the Latin alphabetic and non-alphabetic characters for the communication of text in many European languages using the Latin script, rules for the definitions and use of graphic character subrepertoires, i.e. subsets of the specified character repertoire. Annex A specifies the 7-bit code for the char

14263,IS,,ISO/IEC 7501-1:1991,Identification cards — Machine readable travel documents — Part 1: Machine readable passport,Cartes d'identification — Documents de voyage lisibles par machine — Partie 1: Passeport lisible par machine,1991-11-28,1,['35.240.40'],ISO/IEC JTC 1/SC 17,9599,,[22831],"['en','fr']",1,

22831,IS,,ISO/IEC 7501-1:1993,Identification cards — Machine readable travel documents — Part 1: Machine readable passport,Cartes d'identification — Documents de voyage lisibles par machine — Partie 1: Passeport lisible par machine,1993-12-01,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14263],[29073],"['en','fr']",1,

29073,IS,,ISO/IEC 7501-1:1997,Identification cards — Machine readable travel documents — Part 1: Machine readable passport,Cartes d'identification — Documents de voyage lisibles par machine — Partie 1: Passeport lisible par machine,1997-07-31,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[22831],"[42766,27696]",['en'],1,

42766,IS,,ISO/IEC 7501-1:2005,Identification cards — Machine readable travel documents — Part 1: Machine readable passport,Cartes d'identification — Documents de voyage lisibles par machine — Partie 1: Passeport lisible par machine,2005-10-27,4,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[29073],[45562],['en'],1,"<p>ISO/IEC 7501-1:2005 is a short form endorsement of specific parts of the International Civil Aviation Organization (ICAO) Doc 9303 Part 1 - Machine Readable Passports. ICAO Doc 9303 specifies the form and provides guidance on the construction of machine readable passports (MRPs), in particular in relation to those aspects of the MRP where details of the rightful holder are presented i

21081,IS,,ISO/IEC 7501-2:1995,Identification cards — Machine readable travel documents — Part 2: Machine readable visa,Cartes d'identification — Documents de voyage lisibles par machine — Partie 2: Visa lisible par machine,1995-12-27,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[29074],"['en','fr']",1,

24709,IS,,ISO/IEC 7501-3:1997,Identification cards — Machine readable travel documents — Part 3: Machine readable official travel documents,Cartes d'identification — Documents de voyage lisibles par machine — Partie 3: Documents de voyage officiels lisibles par machine,1997-04-17,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[42771,27696]",['en'],1,

14707,IS,,ISO/IEC 7809:1991,Information technology — Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Classes of procedures,Technologies de l'information — Télécommunications et échange d'informations entre systèmes — Procédures de commande de liaison de données à haut niveau (HDLC) — Classes de procédures,1991-09-26,2,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,"[14711,14712,14706,14710,12536,12405]",[14713],['en'],18,

14713,IS,,ISO/IEC 7809:1993,Information technology — Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Classes of procedures,Technologies de l'information — Télécommunications et échange d'informations entre systèmes — Procédures de commande à haut niveau (HDLC) — Classes de procédures,1993-12-23,3,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,"[14710,14707]",[37010],['en'],22,"<p>Describes the HDLC unbalanced classes of procedures, the HDLC balanced class of procedures, and the HDLC connectionless classes of procedures for synchronous or start/stop data transmission. The procedures use the HDLC frame structure defined in ISO/IEC 3309 and

20918,IS,Amd,ISO/IEC 7809:1993/Amd 10:1995,Information technology — Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Classes of procedures — Amendment 10: Extension of HDLC sequence number modulus beyond 128,Technologies de l'information — Télécommunications et échange d'informations entre systèmes — Procédures de commande à haut niveau (HDLC) — Classes de procédures — Amendement 10: Extension du module du numéro de séquence HDLC au-delà de 128,1995-11-16,3,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[37010],['en'],4,"<p>Increases the modulus number (i.e. the sequence number) in steps up to a maximum of 2 147 483 648 which can be repre

14715,IS,,ISO/IEC 7810:1995,Identification cards — Physical characteristics,Cartes d'identification — Caractéristiques physiques,1995-08-10,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14714],[31432],['en'],5,"<p>This International Standard specifies the physical characteristics of identification cards including card materials, construction, characteristics, and dimensions for three sizes of card. </p><p>ISO/IEC 10373 specifies the test procedures used to check cards against the parameters specified in this International Standard. </p><p>This International Standard specifies the requirements for cards used for identification. It takes into consideration both human and machine aspects and states

31432,IS,,ISO/IEC 7810:2003,Identification cards — Physical characteristics,Cartes d'identification — Caractéristiques physiques,2003-10-31,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14715],"[70483,43889]",['en'],11,"<p>ISO/IEC 7810:2003 is one of a series of standards describing the characteristics of identification cards. It is the purpose of ISO/IEC 7810:2003 to provide criteria to which cards shall perform and to specify the requirements for such cards used for international interchange. It takes into consideration both human and machine aspects and states minimum requirements.</p><p>ISO/IEC 7810:2003 specifies:</p><ul><li>four different sizes of identification cards with a nominal thickn

46562,IS,Amd,ISO/IEC 7810:2003/Amd 1:2009,Identification cards — Physical characteristics — Amendment 1: Criteria for cards containing integrated circuits,Cartes d'identification — Caractéristiques physiques — Amendement 1: Critères pour les cartes contenant des circuits intégrés,2009-12-03,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[70483],['en'],2,

54992,IS,Amd,ISO/IEC 7810:2003/Amd 2:2012,Identification cards — Physical characteristics — Amendment 2: Opacity,Cartes d'identification — Caractéristiques physiques — Amendement 2: Opacité,2012-01-10,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[70483],['en'],1,

14717,IS,,ISO/IEC 7811-1:1995,Identification cards — Recording technique — Part 1: Embossing,Cartes d'identification — Technique d'enregistrement — Partie 1: Estampage,1995-08-10,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14716],[31433],['en'],25,"<p>This part of ISO/IEC 7811 specifies requirements for embossed characters on identification cards. The embossed characters are intended for transfer of data either by use of imprinters or by visual or machine reading. </p><p>ISO/IEC 10373, specifies the test procedures used to check cards against the parameters specified in this part of ISO/IEC 7811. </p><p>This part of 1SO/IEC 7811 specifies the requirements for cards used for identification. It

31433,IS,,ISO/IEC 7811-1:2002,Identification cards — Recording technique — Part 1: Embossing,Cartes d'identification — Technique d'enregistrement — Partie 1: Estampage,2002-10-10,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[14717,14721]",[61935],['en'],21,

61935,IS,,ISO/IEC 7811-1:2014,Identification cards — Recording technique — Part 1: Embossing,Cartes d'identification — Technique d'enregistrement — Partie 1: Estampage,2014-08-25,4,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[31433],[73637],['en'],22,"<p>ISO/IEC 7811-1:2014 is one of a series of International Standards describing the parameters for identification cards as defined in the definitions clause and the use of such cards for international interchange.</p><p>It specifies requirements for embossed characters on identification cards. The embossed characters are intended for transfer of data either by use of imprinters or by visual or machine reading. It takes into consideration both human

14719,IS,,ISO/IEC 7811-2:1995,Identification cards — Recording technique — Part 2: Magnetic stripe,Cartes d'identification — Technique d'enregistrement — Partie 2: Raie magnétique,1995-08-10,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14718],[31440],['en'],13,

31440,IS,,ISO/IEC 7811-2:2001,Identification cards — Recording technique — Part 2: Magnetic stripe — Low coercivity,Cartes d'identification — Technique d'enregistrement — Partie 2: Raie magnétique — Faible coercitivité,2001-02-01,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[14723,14725,14719]",[61936],['en'],21,

61936,IS,,ISO/IEC 7811-2:2014,Identification cards — Recording technique — Part 2: Magnetic stripe — Low coercivity,Cartes d'identification — Technique d'enregistrement — Partie 2: Bandeau magnétique — Faible coercivité,2014-08-14,4,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[31440],[73638],['en'],20,"<p>ISO/IEC 7811-2:2014 specifies requirements for a low coercivity magnetic stripe (including any protective overlay) on an identification card, the encoding technique and coded character sets. It takes into consideration both human and machine aspects and states minimum requirements.</p>"

14721,IS,,ISO/IEC 7811-3:1995,Identification cards — Recording technique — Part 3: Location of embossed characters on ID-1 cards,Cartes d'identification — Technique d'enregistrement — Partie 3: Position des caractères estampés sur les cartes ID-1,1995-08-10,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14720],"[31434,31433]",['en'],3,"<p>This part of 1S0/IEC 7811 specifies the location of embossed characters on identification cards of ID-1 size, the dimensions of which are specified in ISO/IEC 7810. The embossed characters are intended for transfer of data either by use of imprinters or by visual or machine reading.</p><p>IS0/IEC 10373 specifies the test procedures used to check cards against th

14723,IS,,ISO/IEC 7811-4:1995,Identification cards — Recording technique — Part 4: Location of read-only magnetic tracks — Tracks 1 and 2,Cartes d'identification — Technique d'enregistrement — Partie 4: Position des pistes magnétiques pour lecture uniquement — Pistes 1 et 2,1995-08-10,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14722],"[33228,31435,31440]",['en'],3,

14725,IS,,ISO/IEC 7811-5:1995,Identification cards — Recording technique — Part 5: Location of read-write magnetic track — Track 3,Cartes d'identification — Technique d'enregistrement — Partie 5: Position de la piste magnétique enregistrement-lecture — Piste 3,1995-08-10,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14724],"[33228,31436,31440]",['en'],3,

1596,IS,,ISO/IEC 7811-6:1996,Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity,Cartes d'identification — Technique d'enregistrement — Partie 6: Bandeau magnétique — Haute coercitivité,1996-03-28,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[33228],"['en','fr']",27,

33228,IS,,ISO/IEC 7811-6:2001,Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity,Cartes d'identification — Technique d'enregistrement — Partie 6: Bandeau magnétique — Haute coercitivité,2001-02-01,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[14723,1596,14725]",[50370],['en'],23,

39596,IS,Amd,ISO/IEC 7811-6:2001/Amd 1:2005,Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity — Amendment 1: Ui6 criteria and test method,Cartes d'identification — Technique d'enregistrement — Partie 6: Bandeau magnétique — Haute coercitivité — Amendement 1: Critères Ui6 et méthode d'essai,2005-10-13,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[50370],['en'],3,

50370,IS,,ISO/IEC 7811-6:2008,Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity,Cartes d'identification — Technique d'enregistrement — Partie 6: Bandeau magnétique — Haute coercitivité,2008-05-22,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[39596,33228]",[61937],['en'],24,"<p>ISO/IEC 7811 defines the characteristics of identification cards. ISO/IEC 7811-6:2008 provides criteria to which cards shall perform and specifies the requirements for such cards used for international interchange. It takes into consideration both human and machine aspects and states minimum requirements.</p><p>ISO/IEC 7811-6:2008 specifies requirements for a high coercivity magnetic s

56793,IS,Cor,ISO/IEC 7811-6:2008/Cor 1:2010,Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity — Technical Corrigendum 1: .,Cartes d'identification — Technique d'enregistrement — Partie 6: Bandeau magnétique — Haute coercitivité — Rectificatif technique 1: .,2010-08-30,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[61937],['en'],2,

61937,IS,,ISO/IEC 7811-6:2014,Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity,Cartes d'identification — Technique d'enregistrement — Partie 6: Bandeau magnétique — Haute coercitivité,2014-08-25,4,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[50370,56793]",[73639],['en'],22,"<p>ISO/IEC 7811-6:2014 defines the characteristics for identification cards as defined therein and the use of such cards for international interchange.</p><p>It specifies requirements for a high coercivity magnetic stripe (including any protective overlay) on an identification card, the encoding technique, and coded character sets. It takes into consideration both human and machine aspect

34382,IS,,ISO/IEC 7811-7:2004,"Identification cards — Recording technique — Part 7: Magnetic stripe — High coercivity, high density","Cartes d'identification — Technique d'enregistrement — Partie 7: Bandeau magnétique — Haute coercitivité, haute densité",2004-07-30,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[61938],['en'],25,"<p>ISO/IEC 7811-7(2004) is one of a series of International Standards describing the characteristics of identification cards. It is the purpose of ISO/IEC 7811-7 to provide criteria to which cards shall perform and to specify the requirements for such cards used for international interchange. It takes into consideration both human and machine aspects and states minimum r

61938,IS,,ISO/IEC 7811-7:2014,"Identification cards — Recording technique — Part 7: Magnetic stripe — High coercivity, high density","Cartes d'identification — Technique d'enregistrement — Partie 7: Bandeau magnétique — Haute coercitivité, haute densité",2014-08-25,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[34382],[73640],['en'],26,"<p>ISO/IEC 7811-7:2014 is one of a series of International Standards describing the characteristics for identification cards as defined in the definitions clause and the use of such cards for international interchange.</p><p>It specifies requirements for a high coercivity magnetic stripe (including any protective overlay) on an identification card and encoding tec

42205,IS,,ISO/IEC 7811-8:2008,"Identification cards — Recording technique — Part 8: Magnetic stripe — Coercivity of 51,7 kA/m (650 Oe)","Cartes d'identification — Technique d'enregistrement — Partie 8: Zone magnétique — Coercivité de 51,7 kA/m (650 Oe)",2008-02-18,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[61939],['en'],9,"<p>ISO/IEC 7811-8:2008 is one of a series of International Standards defining the characteristics of identification cards. It provides criteria to which cards shall perform and specifies the requirements for such cards used for international interchange. It takes into consideration both human and machine aspects and states minimum requirements.</p><p>ISO/IEC 7811-8:2008 sp

46200,IS,,ISO/IEC 7811-9:2008,Identification cards — Recording technique — Part 9: Tactile identifier mark,Cartes d'identification — Technique d'enregistrement — Partie 9: Marque d'identificateur tactile,2008-05-08,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[63145],['en'],3,<p>ISO/IEC 7811 defines the characteristics of identification cards. ISO/IEC 7811-9:2008 specifies the physical characteristics of a tactile identifier mark used by visually-impaired card holders to distinguish their cards. It defines the area on the card for the tactile identifier mark (TIM) and the layout of Braille style embossed dots arranged in patterns to enable easy tactile recognition.</p>

20193,IS,,ISO/IEC 7812-1:1993,Identification cards — Identification of issuers — Part 1: Numbering system,Cartes d'identification — Identification des émetteurs — Partie 1: Système de numérotation,1993-12-02,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[14727,14728]",[31443],"['en','fr']",4,

31443,IS,,ISO/IEC 7812-1:2000,Identification cards — Identification of issuers — Part 1: Numbering system,Cartes d'identification — Identification des émetteurs — Partie 1: Système de numérotation,2000-09-07,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[20193],[39698],['en'],6,

36326,IS,Cor,ISO/IEC 7812-1:2000/Cor 1:2001,Identification cards — Identification of issuers — Part 1: Numbering system — Technical Corrigendum 1,Cartes d'identification — Identification des émetteurs — Partie 1: Système de numérotation — Rectificatif technique 1,2001-12-20,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[39698],['en'],1,

39698,IS,,ISO/IEC 7812-1:2006,Identification cards — Identification of issuers — Part 1: Numbering system,Cartes d'identification — Identification des émetteurs — Partie 1: Système de numérotation,2006-10-13,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[31443,36326]","[66011,56175]",['en'],7,"<p>ISO/IEC 7812-1:2006 specifies a numbering system for the identification of issuers of cards that require an issuer identification number to operate in international, interindustry and/or intra-industry interchange.</p>"

66011,IS,,ISO/IEC 7812-1:2015,Identification cards — Identification of issuers — Part 1: Numbering system,Cartes d'identification — Identification des émetteurs — Partie 1: Système de numérotation,2015-07-31,4,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[39698],[70484],['en'],6,"<p>ISO/IEC 7812-1:2012 specifies a numbering system for the identification of the card issuers, the format of the issuer identification number (IIN) and the primary account number (PAN).</p>"

20194,IS,,ISO/IEC 7812-2:1993,Identification cards — Identification of issuers — Part 2: Application and registration procedures,Cartes d'identification — Identification des émetteurs — Partie 2: Procédures de demande d'enregistrement,1993-12-02,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[14727,14728]",[32081],"['en','fr']",14,

32081,IS,,ISO/IEC 7812-2:2000,Identification cards — Identification of issuers — Part 2: Application and registration procedures,Cartes d'identification — Identification des émetteurs — Partie 2: Procédures de demande d'enregistrement,2000-09-07,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[20194],[39699],['en'],20,

39699,IS,,ISO/IEC 7812-2:2007,Identification cards — Identification of issuers — Part 2: Application and registration procedures,Cartes d'identification — Identification des émetteurs — Partie 2: Application et procédures de demande d'enregistrement,2007-04-20,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[32081],"[66012,56114]",['en'],23,"<p>ISO/IEC 7812-2:2007 is one of a series of International Standards describing the parameters for identification cards, and the use of such cards for international and/or inter-industry interchange. It describes the application and registration procedures for numbers issued in accordance with ISO/IEC 7812-1. ISO/IEC 7812-1 specifies the numbering system for th

66012,IS,,ISO/IEC 7812-2:2015,Identification cards — Identification of issuers — Part 2: Application and registration procedures,Cartes d'identification — Identification des émetteurs — Partie 2: Application et procédures de demande d'enregistrement,2015-07-31,4,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[39699],[70485],['en'],27,<p>ISO/IEC 7812-2:2012 specifies the application and registration procedures for Issuer Identification Numbers (IINs) issued in accordance with ISO/IEC 7812-1.</p>

14730,IS,,ISO/IEC 7813:1990,Identification cards — Financial transaction cards,Cartes d'identification — Cartes de transactions financières,1990-05-31,3,['35.240.40'],ISO/IEC JTC 1/SC 17,9599,"[7917,8957,14729]",[14731],"['en','fr']",4,

14731,IS,,ISO/IEC 7813:1995,Identification cards — Financial transaction cards,Cartes d'identification — Cartes de transactions financières,1995-08-10,4,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14730],[31441],['en'],4,

25372,IS,Amd,ISO/IEC 7813:1995/Amd 1:1996,Identification cards — Financial transaction cards — Amendment 1,Cartes d'identification — Cartes de transactions financières — Amendement 1,1996-12-26,4,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[31441],['en'],3,

31441,IS,,ISO/IEC 7813:2001,Identification cards — Financial transaction cards,Cartes d'identification — Cartes de transactions financières,2001-05-10,5,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[25372,14731]",[43317],['en'],7,

29257,IS,,ISO/IEC 7816-1:1998,Identification cards — Integrated circuit(s) cards with contacts — Part 1: Physical characteristics,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 1: Caractéristiques physiques,1998-10-08,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14732],[54089],"['en','fr']",3,

34360,IS,Amd,ISO/IEC 7816-1:1998/Amd 1:2003,Identification cards — Integrated circuit(s) cards with contacts — Part 1: Physical characteristics — Amendment 1: Maximum height of the IC contact surface,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 1: Caractéristiques physiques — Amendement 1: Hauteur maximale de la surface des contacts de la carte IC,2003-11-06,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[54089],['en'],1,

54089,IS,,ISO/IEC 7816-1:2011,Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics,Cartes d'identification — Cartes à circuit intégré — Partie 1: Cartes à contacts — Caractéristiques physiques,2011-01-31,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[34360,29257]",[70483],['en'],3,"<p>ISO/IEC 7816-1:2011 specifies the physical characteristics of integrated circuit cards with contacts. It applies to identification cards of the ID-1 card type, which can include embossing and/or a magnetic stripe and/or tactile identifier mark as specified in ISO/IEC 7811. Test methods are specified in ISO/IEC 10373-1.</p><p>ISO/IEC 7816-1:2011 applies to cards wh

31419,IS,,ISO/IEC 7816-11:2004,Identification cards — Integrated circuit cards — Part 11: Personal verification through biometric methods,Cartes d'identification — Cartes à circuit intégré — Partie 11: Verification personelle par méthodes biométriques,2004-03-17,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[67799],['en'],33,"<p>ISO/IEC 7816-11:2004 specifies the usage of interindustry commands and data objects related to personal verification through biometric methods in integrated circuit cards. The interindustry commands used are defined in ISO/IEC 7816-4. The data objects are partially defined in this International Standard, partially imported from ISO/IEC 19785-1.</p><p>ISO/IEC 7816-11 also

67799,IS,,ISO/IEC 7816-11:2017,Identification cards — Integrated circuit cards — Part 11: Personal verification through biometric methods,Cartes d'identification — Cartes à circuit intégré — Partie 11: Verification personelle par méthodes biométriques,2017-12-01,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[31419],[78382],['en'],26,<p>ISO/IEC 7816-11:2017 specifies security-related interindustry commands to be used for personal verification through biometric methods in integrated circuit cards. It also defines the data structure and data access methods for use of the card as a carrier of the biometric reference and/or as the device to perform the verification of the cardholder's biometric probe

35168,IS,,ISO/IEC 7816-15:2004,Identification cards — Integrated circuit cards — Part 15: Cryptographic information application,Cartes d'identification — Cartes à circuit intégré — Partie 15: Application des informations cryptographiques,2004-01-06,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[65250],['en'],70,"<p>ISO/IEC 7816-15:2004 specifies a card application. This application contains information on cryptographic functionality. Further, ISO/IEC 7816-15:2004 defines a common syntax (in ASN.1) and format for the cryptographic information and mechanisms to share this information whenever appropriate.</p><p>ISO/IEC 7816-15:2004 supports the following capabilities:</p><ul><li>storage of multipl

40441,IS,Amd,ISO/IEC 7816-15:2004/Amd 1:2007,Identification cards — Integrated circuit cards — Part 15: Cryptographic information application — Amendment 1: Examples of the use of the cryptographic information application,Cartes d'identification — Cartes à circuit intégré — Partie 15: Application des informations cryptographiques — Amendement 1: Exemples d'emploi de l'application des informations cryptographiques,2007-10-31,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[65250],['en'],38,

43319,IS,Amd,ISO/IEC 7816-15:2004/Amd 2:2008,Identification cards — Integrated circuit cards — Part 15: Cryptographic information application — Amendment 2: Error corrections and extensions for multi-application environments,Cartes d'identification — Cartes à circuit intégré — Partie 15: Application des informations cryptographiques — Amendement 2: Corrections d'erreurs et extensions pour environnements d'applications multiples,2008-11-26,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[65250],['en'],7,

40743,IS,Cor,ISO/IEC 7816-15:2004/Cor 1:2004,Identification cards — Integrated circuit cards — Part 15: Cryptographic information application — Technical Corrigendum 1,Cartes d'identification — Cartes à circuit intégré — Partie 15: Application des informations cryptographiques — Rectificatif technique 1,2004-06-30,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[65250],['en'],2,

26536,IS,,ISO/IEC 7816-2:1999,Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts,Cartes d'identification — Cartes à circuit intégré à contacts — Partie 2: Cartes à contact — Dimensions et emplacements des contacts,1999-02-25,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[14733],[45989],"['en','fr']",5,

36576,IS,Amd,ISO/IEC 7816-2:1999/Amd 1:2004,Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts — Amendment 1: Assignment of contacts C4 and C8,Cartes d'identification — Cartes à circuit intégré à contacts — Partie 2: Cartes à contact — Dimensions et emplacements des contacts — Amendement 1: Attribution des contacts C4 et C8,2004-06-11,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[45989],['en'],2,

14734,IS,,ISO/IEC 7816-3:1989,Identification cards — Integrated circuit(s) cards with contacts — Part 3: Electronic signals and transmission protocols,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 3: Signaux électroniques et protocoles de transmission,1989-09-07,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[14735],"['en','fr']",14,

14737,IS,Amd,ISO/IEC 7816-3:1989/Amd 1:1992,Identification cards — Integrated circuit(s) cards with contacts — Part 3: Electronic signals and transmission protocols — Amendment 1,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 3: Signaux électroniques et protocoles de transmission — Amendement 1,1992-11-24,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[14735],"['en','fr']",13,

22947,IS,Amd,ISO/IEC 7816-3:1989/Amd 2:1994,Identification cards — Integrated circuit(s) cards with contacts — Part 3: Electronic signals and transmission protocols — Amendment 2,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 3: Signaux électroniques et protocoles de transmission — Amendement 2,1994-12-01,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[14735],"['en','fr']",8,

14735,IS,,ISO/IEC 7816-3:1997,Information technology — Identification cards — Integrated circuit(s) cards with contacts — Part 3: Electronic signals and transmission protocols,Technologies de l'information — Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 3: Signaux électroniques et protocoles de transmission,1997-12-25,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[22947,14737,14734]",[38770],"['en','fr']",27,

34974,IS,Amd,ISO/IEC 7816-3:1997/Amd 1:2002,"Information technology — Identification cards — Integrated circuit(s) cards with contacts — Part 3: Electronic signals and transmission protocols — Amendment 1: Electrical characteristics and class indication for integrated circuit(s) cards operating at 5 V, 3 V and 1,8 V","Technologies de l'information — Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 3: Signaux électroniques et protocoles de transmission — Amendement 1: Caractéristiques électriques et indication des classes pour cartes à circuit(s) intégré(s) fonctionnant à 5 V, 3 V et 1,8 V",2002-06-06,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[38770],['en'],5, 3497

14738,IS,,ISO/IEC 7816-4:1995,Information technology — Identification cards — Integrated circuit(s) cards with contacts — Part 4: Interindustry commands for interchange,Technologies de l'information — Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 4: Commandes intersectorielles pour les échanges,1995-08-31,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[36134,34259,37990,37989]","['en','fr']",46,"<p>Specifies the content of the messages, commands and responses, transmitted by the interface device to the card and conversely, the structure and content of the historical bytes, structure of files and data, access methods to files and data in the card, a security archite

28731,IS,Amd,ISO/IEC 7816-4:1995/Amd 1:1997,Information technology — Identification cards — Integrated circuit(s) cards with contacts — Part 4: Interindustry commands for interchange — Amendment 1: secure messaging on the structures of APDU messages,Technologies de l'information — Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 4: Commandes intersectorielles pour les échanges — Amendement 1: la messagerie de sécurité sur les structures des messages APDU,1997-12-18,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[36134,34259,37990,37989]","['en','fr']",5,

36134,IS,,ISO/IEC 7816-4:2005,"Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange","Cartes d'identification — Cartes à circuit intégré — Partie 4: Organisation, sécurité et commandes pour les échanges",2005-01-05,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[14738,31035,25835,19980,28731,29700,24183,30194,31418]",[54550],['en'],83,"<p>ISO/IEC 7816-4:2005 specifies:</p><ul><li>contents of command-response pairs exchanged at the interface,</li><li>means of retrieval of data elements and data objects in the card,</li><li>structures and contents of historical bytes to describe operating characteristics of the card,</li><li>structures for ap

46543,IS,Amd,ISO/IEC 7816-4:2005/Amd 1:2008,"Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange — Amendment 1: Record activation and deactivation","Cartes d'identification — Cartes à circuit intégré — Partie 4: Organisation, sécurité et commandes pour les échanges — Amendement 1: Activation et désactivation d'enregistrement",2008-09-24,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[54550],['en'],5,

54550,IS,,ISO/IEC 7816-4:2013,"Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange","Cartes d'identification — Cartes à circuit intégré — Partie 4: Organisation, sécurité et commandes pour les échanges",2013-04-04,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[46543,36134]",[77180],['en'],150,"<p>ISO/IEC 7816-4:2013<b> </b>is intended to be used in any sector of activity. It specifies:</p><p>a) contents of command-response pairs exchanged at the interface,</p><p>b) means of retrieval of data elements and data objects in the card,</p><p>c) structures and contents of historical bytes to describe operating characteristics of the card,</p><p>

70479,IS,Amd,ISO/IEC 7816-4:2013/Amd 1:2018,"Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange — Amendment 1: Multiple record handling","Cartes d'identification — Cartes à circuit intégré — Partie 4: Organisation, sécurité et commandes pour les échanges — Amendement 1: Manutention multiple record",2018-07-24,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[77180],['en'],11,

72559,IS,Amd,ISO/IEC 7816-4:2013/Amd 2:2018,"Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange — Amendment 2: Waiting time management","Cartes d'identification — Cartes à circuit intégré — Partie 4: Organisation, sécurité et commandes pour les échanges — Amendement 2: Gestion du temps d'attente",2018-08-23,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[77180],['en'],6,

65200,IS,Cor,ISO/IEC 7816-4:2013/Cor 1:2014,"Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange — Technical Corrigendum 1","Cartes d'identification — Cartes à circuit intégré — Partie 4: Organisation, sécurité et commandes pour les échanges — Rectificatif technique 1",2014-08-14,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[77180],['en'],5,

19980,IS,,ISO/IEC 7816-5:1994,Identification cards — Integrated circuit(s) cards with contacts — Part 5: Numbering system and registration procedure for application identifiers,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 5: Système de numérotation et procédure d'enregistrement d'identificateurs d'applications,1994-05-26,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[36134,34259,37990,37989]","['en','fr']",7,<p>The numbering system described provides a mean for an application and related services offered by a provider to identify if a given card contains the elements required by its application and related services. An application identifier (AID) is used to addr

25835,IS,Amd,ISO/IEC 7816-5:1994/Amd 1:1996,Identification cards — Integrated circuit(s) cards with contacts — Part 5: Numbering system and registration procedure for application identifiers — Amendment 1,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 5: Système de numérotation et procédure d'enregistrement d'identificateurs d'applications — Amendement 1,1996-12-19,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[36134,34259,37990,37989]","['en','fr']",5,<p>Replaces clause 7 by a new wording.</p>

24183,IS,,ISO/IEC 7816-6:1996,Identification cards — Integrated circuit(s) cards with contacts — Part 6: Interindustry data elements,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 6: Éléments de données intersectoriels,1996-05-02,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[38780,36134,34259,37990,37989]","['en','fr']",16,"<p>Specifies the Data Elements (DEs) used in interindustry interchange based on integrated circuit cards (ICCs) and identifies identifier, name, description, format, coding and layout of each DE. defines the means of retrieval of DEs in the card.</p>"

31418,IS,Amd,ISO/IEC 7816-6:1996/Amd 1:2000,Identification cards — Integrated circuit(s) cards with contacts — Part 6: Interindustry data elements — Amendment 1: IC manufacturer registration,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 6: Éléments de données intersectoriels — Amendement 1: Enregistrement des fabricants des circuits integrés,2000-06-08,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[38780,36134,34259,37990,37989]",['en'],5,

29700,IS,Cor,ISO/IEC 7816-6:1996/Cor 1:1998,Identification cards — Integrated circuit(s) cards with contacts — Part 6: Interindustry data elements — Technical Corrigendum 1,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 6: Éléments de données intersectoriels — Rectificatif technique 1,1998-03-26,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[38780,36134,34259,37990,37989]",['en'],2,

38780,IS,,ISO/IEC 7816-6:2004,Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange,Cartes d'identification — Cartes à circuit intégré — Partie 6: Éléments de données intersectoriels pour les échanges,2004-05-21,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[29700,24183,31418]",[64598],['en'],19,"<p>ISO/IEC 7816-6:2004 specifies the Data Elements (DEs) used for interindustry interchange based on integrated circuit cards (ICCs) both with contacts and without contacts. It gives the identifier, name, description, format, coding and layout of each DE and defines the means of retrieval of DEs from the card.</p>"

44369,IS,Cor,ISO/IEC 7816-6:2004/Cor 1:2006,Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange — Technical Corrigendum 1,Cartes d'identification — Cartes à circuit intégré — Partie 6: Éléments de données intersectoriels pour les échanges — Rectificatif technique 1,2006-06-14,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[64598],['en'],3,

64598,IS,,ISO/IEC 7816-6:2016,Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange,Cartes d'identification — Cartes à circuit intégré — Partie 6: Éléments de données intersectoriels pour les échanges,2016-06-14,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[44369,38780]",[77181],['en'],28,"<p>ISO/IEC 7816-6:2016 specifies directly or by reference, data elements, including composite data elements that may be used in interindustry interchange.</p><p>It identifies the following characteristics of each data element:</p><p>- identifier;</p><p>- name;</p><p>- description and reference;</p><p>- format and coding (if not available in o

30194,IS,,ISO/IEC 7816-8:1999,Identification cards — Integrated circuit(s) cards with contacts — Part 8: Security related interindustry commands,Cartes d'identification — Cartes à circuit(s) intégr(é)s à contacts — Partie 8: Commandes intersectorielles de sécurité,1999-12-02,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[36134,34259,37990,37989]",['en'],27,

37989,IS,,ISO/IEC 7816-8:2004,Identification cards — Integrated circuit cards — Part 8: Commands for security operations,Cartes d'identification — Cartes à circuit intégré — Partie 8: Commandes pour des operations de sécurité,2004-06-11,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[14738,31035,25835,19980,28731,29700,30194,24183,31418]",[66092],['en'],19,"<p>ISO/IEC 7816-8:2004 specifies interindustry commands for integrated circuit cards (either with contacts or without contacts) that may be used for cryptographic operations. These commands are complementary to and based on the commands listed in ISO/IEC 7816-4.</p><p>Annexes are provided that give examples of operations related to digital sig

66092,IS,,ISO/IEC 7816-8:2016,Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations,Cartes d'identification — Cartes à circuit intégré — Partie 8: Commandes et mécanismes pour les opérations de sécurité,2016-11-01,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[37989],[75844],['en'],36,<p>ISO 7816-8:2016 specifies interindustry commands that may be used for security operations. This document also provides informative directives on how to construct security mechanisms with ISO/IEC 7816‑4 defined commands.</p><p>The choice and conditions of use of cryptographic mechanism in security operations may affect card exportability. The evaluation of the su

75844,IS,,ISO/IEC 7816-8:2019,Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations,Cartes d'identification — Cartes à circuit intégré — Partie 8: Commandes et mécanismes pour les opérations de sécurité,2019-08-16,4,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,[66092],[79893],['en'],35,<p>This document specifies interindustry commands which can be used for security operations. This document also provides informative directives on how to construct security mechanisms with commands defined in ISO/IEC 7816‑4.</p><p>The choice and conditions of use of cryptographic mechanism in security operations can affect card exportability. The evaluation of the

31035,IS,,ISO/IEC 7816-9:2000,Identification cards — Integrated circuit(s) cards with contacts — Part 9: Additional interindustry commands and security attributes,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 9: Commandes intersectorielles additionnelles et attributs de sécurité,2000-09-07,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,"[36134,34259,37990,37989]",['en'],31,

37990,IS,,ISO/IEC 7816-9:2004,Identification cards — Integrated circuit cards — Part 9: Commands for card management,Cartes d'identification — Cartes à circuit intégré — Partie 9: Commandes pour la gestion des cartes,2004-06-11,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[14738,31035,25835,19980,28731,29700,24183,30194,31418]",[67802],['en'],12,"<p>ISO/IEC 7816-9:2004 specifies interindustry commands for integrated circuit cards (both with contacts and without contacts) for card and file management, e.g. file creation and deletion. These commands cover the entire life cycle of the card and therefore some commands may be used before the card has been issued to the cardholder or after the card h

51367,IS,,ISO/IEC 80079-34:2011,Explosive atmospheres — Part 34: Application of quality systems for equipment manufacture,Atmosphères explosives — Partie 34: Application des systèmes de qualité pour la fabrication d'équipements,2011-04-26,1,['29.260.20'],ISO/TMBG,9599,,[70293],"['en','fr']",53,<div><p>ISO/IEC 80079-34:2011 specifies particular requirements and informationfor establishing and maintaining a quality system to manufacture Ex equipmentincluding protective systems in accordance with the Ex certificate. It does notpreclude the use of other quality systems that are compatible with theobjectives of ISO 9001:2008 and which provide equivalent results. Thispublication is published as a

21414,IS,,ISO/IEC 8072:1994,Information technology — Open Systems Interconnection — Transport service definition,Technologies de l'information — Interconnexion de systèmes ouverts (OSI) — Définition du service de transport,1994-07-21,2,['35.100.40'],ISO/IEC JTC 1/SC 6,9599,"[15095,15093]",[27497],"['en','fr']",25,

15097,IS,,ISO/IEC 8073:1988,Information processing systems — Open Systems Interconnection — Connection oriented transport protocol specification,Systèmes de traitement de l'information — Interconnexion de systèmes ouverts — Protocole de transport en mode connexion,1988-12-29,2,['35.100.70'],ISO/IEC JTC 1/SC 6,9599,[15096],"[19979,20604]",['en'],67,