Withdrawn and superseded ISO standards — page 201 of 246

52994,IS,,ISO/IEC 17020:2012,Conformity assessment — Requirements for the operation of various types of bodies performing inspection,Évaluation de la conformité — Exigences pour le fonctionnement de différents types d'organismes procédant à l'inspection,2012-02-27,2,['03.120.20'],ISO/CASCO,9599,[29342],[86292],"['en','es','fr','ru']",18,"<p>ISO/IEC 17020:2012 specifies requirements for the competence of bodies performing inspection and for the impartiality and consistency of their inspection activities. </p><p>It applies to inspection bodies of type A, B or C, as defined in ISO/IEC 17020:2012, and it applies to any stage of inspection.</p>"

56676,IS,,ISO/IEC 17021:2011,Conformity assessment — Requirements for bodies providing audit and certification of management systems,Évaluation de la conformité — Exigences pour les organismes procédant à l'audit et à la certification des systèmes de management,2011-01-31,2,['03.120.20'],ISO/CASCO,9599,[44809],[61651],"['en','es','fr']",44,"<p>ISO/IEC 17021:2011 contains principles and requirements for the competence, consistency and impartiality of the audit and certification of management syst

29346,IS,,ISO/IEC 17024:2003,Conformity assessment — General requirements for bodies operating certification of persons,Évaluation de la conformité — Exigences générales pour les organismes de certification procédant à la certification de personnes,2003-03-28,1,['03.120.20'],ISO/CASCO,9599,,[52993],"['en','es','fr']",10,"<p>ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel.</p>"

52993,IS,,ISO/IEC 17024:2012,Conformity assessment — General requirements for bodies operating certification of persons,Évaluation de la conformité — Exigences générales pour les organismes de certification procédant à la certification de personnes,2012-07-03,2,['03.120.20'],ISO/CASCO,9599,[29346],[86291],"['ar','en','es','fr','ru']",21,"<p>ISO/IEC 17024:2012 contains principles and requirements for a body certifying persons against specific requirements, and includes the development and maintenance of a certification scheme for persons.</p>"

30239,IS,,ISO/IEC 17025:1999,General requirements for the competence of testing and calibration laboratories,Prescriptions générales concernant la compétence des laboratoires d'étalonnages et d'essais,1999-12-16,1,['03.120.20'],ISO/CASCO,9599,[19734],[39883],"['en','fr']",26,

39883,IS,,ISO/IEC 17025:2005,General requirements for the competence of testing and calibration laboratories,Exigences générales concernant la compétence des laboratoires d'étalonnages et d'essais,2005-05-12,2,['03.120.20'],ISO/CASCO,9599,"[30239,39362]",[66912],"['ar','en','es','fr','ru']",28,"<p>ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testing and calibration performed using standard methods,

44644,IS,Cor,ISO/IEC 17025:2005/Cor 1:2006,General requirements for the competence of testing and calibration laboratories — Technical Corrigendum 1,Exigences générales concernant la compétence des laboratoires d'étalonnages et d'essais — Rectificatif technique 1,2006-08-15,2,['03.120.20'],ISO/CASCO,9599,,[66912],"['en','es','fr','ru']",3,

29353,IS,,ISO/IEC 17030:2003,Conformity assessment — General requirements for third-party marks of conformity,Évaluation de la conformité — Exigences générales pour les marques de conformité par tierce partie,2003-10-09,1,['03.120.20'],ISO/CASCO,9599,,[78283],"['ar','en','es','fr']",5,"<p>ISO/IEC 17030:2003 provides general requirements for third-party marks of conformity, including their issue and use.</p>"

29366,IS,,ISO/IEC 17043:2010,Conformity assessment — General requirements for proficiency testing,Évaluation de la conformité — Exigences générales concernant les essais d'aptitude,2010-01-29,1,['03.120.20'],ISO/CASCO,9599,"[27216,27217]",[80864],"['ar','en','es','fr','ru']",39,"<p>ISO/IEC 17043:2010 specifies general requirements for the competence of providers of proficiency testing schemes and for the development and operation of proficiency testing schemes. These requirements are intended to be general for all types of proficiency testing schemes, and they can be used as a basis for specific technical requirements for particular fields of application.</p>"

59388,IS,,ISO/IEC 17203:2011,Information technology — Open Virtualization Format (OVF) specification,Technologies de l'information — Spécification du format de virtualisation ouvert (OVF),2011-11-21,1,['35.100.05'],ISO/IEC JTC 1/SC 38,9599,,[72081],['en'],37,"<p>ISO/IEC 17203:2011 specifies an open, secure, portable, efficient and extensible format for the packaging and distribution of software to be run in virtual machines.</p>"

38318,IS,,ISO/IEC 17341:2004,"Information technology — Data interchange on 120 mm and 80 mm optical disk using +RW format — Capacity: 4,7 Gbytes and 1,46 Gbytes per side","Technologies de l'information — Échange de données sur disque optique de 120 mm et 80 mm en utilisant le format +RW — Capacité: 4,7 Go et 1,46 Go par face",2004-07-13,1,['35.220.30'],ISO/IEC JTC 1/SC 23,9599,,[40167],['en'],105,"<p>ISO/IEC 17341:2004 specifies the mechanical, physical and optical characteristics of 120 mm rewritable optical disks with capacities of 4,7 Gbytes and 9,4 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing fo

40167,IS,,ISO/IEC 17341:2005,"Information technology — Data interchange on 120 mm and 80 mm optical disk using +RW format — Capacity: 4,7 Gbytes and 1,46 Gbytes per side (Recording speed up to 4X)","Technologies de l'information — Échange de données sur disque optique de 120 mm et 80 mm en utilisant le format +RW — Capacité: 4,7 Go et 1,46 Go par face (Vitesse d'enregistrement inférieure ou égale à 4X)",2005-02-07,2,['35.220.30'],ISO/IEC JTC 1/SC 23,9599,[38318],[43907],['en'],118,"<p>ISO/IEC 17341:2005 specifies the mechanical, physical and optical characteristics of 120 mm rewritable optical disks with capacities of 4,7 GB and 9,4 GB. It specifies the quality of the recorded and unrecorded

43907,IS,,ISO/IEC 17341:2006,"Information technology — Data Interchange on 120 mm and 80 mm Optical Disk using +RW Format — Capacity: 4,7 Gbytes and 1,46 Gbytes per Side (Recording speed up to 4X)","Technologies de l'information — Échange de données sur disque optique de 120 mm et 80 mm en utilisant le format +RW — Capacité: 4,7 Go et 1,46 Go par face (vitesse d'enregistrement inférieure ou égale à 4X)",2006-11-22,3,['35.220.30'],ISO/IEC JTC 1/SC 23,9599,[40167],[52064],['en'],127,"<p>ISO/IEC 17341:2006 specifies the mechanical, physical and optical characteristics of 120 mm rewritable optical disks with capacities of 4,7 GB and 9,4 GB. It specifies the quality of the recorded and unrecorded

38321,IS,,ISO/IEC 17343:2004,Information technology — Telecommunications and information exchange between systems — Corporate telecommunication networks — Signalling interworking between QSIG and SIP — Basic services,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux de télécommunications d'entreprise — Signalisation d'interfonctionnement entre QSIG et SIP — Services de base,2004-02-09,1,['33.040.35'],ISO/IEC JTC 1/SC 6,9599,,[45586],['en'],47,"<p>ISO/IEC 17343:2004 specifies signalling interworking between 'QSIG' and the Session Initiation Protocol (SIP) in support of basic services within a corporate telecommunication network (CN). 'QSIG'

40169,IS,,ISO/IEC 17344:2005,"Information technology — Data interchange on 120 mm and 80 mm Optical Disk using +R format — Capacity: 4,7 and 1,46 Gbytes per side (Recording speed up to 8X)","Technologies de l'information — Échange de données sur disque optique de 120 mm et 80 mm en utilisant le format +R — Capacité: 4,7 Go et 1,46 Go par face (vitesse d'enregistrement inférieure ou égale à 8X)",2005-02-07,1,['35.220.30'],ISO/IEC JTC 1/SC 23,9599,,[41004],['en'],126,"<p>ISO/IEC 17344:2005 specifies the mechanical, physical and optical characteristics of 120 mm recordable optical disks with capacities of 4,7 gigabytes and 9,4 gigabytes. It specifies the quality of the recorded and unrecorded s

43908,IS,,ISO/IEC 17344:2006,"Information technology — Data Interchange on 120 mm and 80 mm Optical Disk using +R Format — Capacity: 4,7 and 1,46 Gbytes per Side (Recording speed up to 16X)","Technologies de l'information — Échange de données sur disques optiques de 120 mm et 80 mm en utilisant le format +R — Capacité: 4,7 Go et 1,46 Go par face (vitesse d'enregistrement inférieure ou égale à 16X)",2006-11-22,3,['35.220.30'],ISO/IEC JTC 1/SC 23,9599,[41004],[52065],['en'],155,"<p>ISO/IEC 17344:2006 specifies the mechanical, physical and optical characteristics of 120 mm recordable optical disks with capacities of 4,7 Gbytes and 9,4 Gbytes. It specifies the quality of the recorded and unrecor

40171,IS,,ISO/IEC 17345:2005,Information technology — Data interchange on 130 mm rewritable and write once read many ultra density optical (UDO) disk cartridges — Capacity: 30 Gbytes per cartridge (first generation),"Technologies de l'information — Échange de données sur cartouches de disques de 130 mmde diamètre, de densité ultra-optique (UDO), pour réécriture et pour <<write once read many>> — Capacité: 30 Go par cartouche (première génération)",2005-02-02,1,['35.220.30'],ISO/IEC JTC 1/SC 23,9599,,[43911],['en'],155,"<p>ISO/IEC 17345:2005 specifies the mechanical, physical and optical characteristics of a 130 mm optical disk cartridge (ODC) that employs thermo-optical Phase Change effects

60036,IS,,ISO/IEC 17549-2:2015,Information technology — User interface guidelines on menu navigation — Part 2: Navigation with 4-direction devices,Technologies de l'information — Directives sur la navigation dans les menus d'interfaces utilisateurs — Partie 2: Navigation avec des commandes quadridirectionnelles,2015-05-18,1,['35.240.20'],ISO/IEC JTC 1/SC 35,9599,,[79017],['en'],16,"<p>ISO/IEC 17549-2:2015 gives guidelines on the design of navigation methods for selection menus with use of a 4-direction device. A 4-direction key is an example of a 4-direction device. The guidelines are applicable to any information equipment on which the display area is associated with the 4-direction device.

60200,IS,,ISO/IEC 17629:2014,Information technology — Office equipment — Method for measuring first print out time for digital printing devices,Technologies de l'information — Équipements de bureau — Méthode de mesure de la première page hors délai d'un dispositif d'impression numérique,2014-06-05,1,['37.100.10'],ISO/IEC JTC 1/SC 28,9599,,[85426],['en'],30,"<p>ISO/IEC 17629:2014 specifies a method for measuring first print out time of digital printing devices. It is applicable to digital printing devices and multifunctional devices. It is intended to be used for black and white (B&amp;W) as well as colour digital printing devices and multifunctional devices of any underlying marking technolo

60544,IS,,ISO/IEC 17788:2014,Information technology — Cloud computing — Overview and vocabulary,Technologies de l'information — Informatique en nuage — Vue d'ensemble et vocabulaire,2014-10-10,1,"['01.040.35','35.020']",ISO/IEC JTC 1/SC 38,9599,,"[82758,80351]",['en'],10,"<p>ISO/IEC 17788:2014 provides an overview of cloud computing along with a set of terms and definitions. It is a terminology foundation for cloud computing standards.</p><p>ISO/IEC 17788:2014 is applicable to all types of organizations (e.g., commercial enterprises, government agencies, not-for-profit organizations).</p>"

60545,IS,,ISO/IEC 17789:2014,Information technology — Cloud computing — Reference architecture,Technologies de l'information — Informatique en nuage — Architecture de référence,2014-10-10,1,['35.210'],ISO/IEC JTC 1/SC 38,9599,,[82759],['en'],53,"<p>ISO/IEC 17789:2014 specifies the cloud computing reference architecture (CCRA). The reference architecture includes the <b>cloud computing roles</b>, <b>cloud computing activities</b>, and the <b>cloud computing</b> <b>functional</b> <b>components</b> and their relationships.</p>"

33441,IS,,ISO/IEC 17799:2000,Information technology — Code of practice for information security management,Technologies de l'information — Code de pratique pour la gestion de sécurité d'information,2000-11-30,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,"[39612,36359]",['en'],71,

39612,IS,,ISO/IEC 17799:2005,Information technology — Security techniques — Code of practice for information security management,Technologies de l'information — Techniques de sécurité — Code de bonne pratique pour la gestion de la sécurité de l'information,2005-06-10,2,['35.030'],ISO/IEC JTC 1/SC 27,9599,[33441],[50297],"['en','fr']",115,"<p>ISO/IEC 17799:2005 establishes guidelines and general principles for initiating, implementing, maintaining, and improving information security management in an organization. The objectives outlined provide general guidance on the commonly accepted goals of information security management. ISO/IEC 17799:2005 contains best practices of control objectives a

46381,IS,Cor,ISO/IEC 17799:2005/Cor 1:2007,Information technology — Security techniques — Code of practice for information security management — Technical Corrigendum 1,Technologies de l'information — Techniques de sécurité — Code de bonne pratique pour la gestion de la sécurité de l'information — Rectificatif technique 1,2007-07-06,2,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[50297],"['en','fr']",1,

60611,IS,,ISO/IEC 17823:2015,Information technology — Office equipment — Colour terminology for office colour equipment,Technologies de l'information — Equipement de bureau — Terminologie couleur pour équipement couleur de bureau,2015-09-14,1,['37.100.10'],ISO/IEC JTC 1/SC 28,9599,,[83511],['en'],15,"<p>ISO/IEC 17823:2015 provides definitions for colour terms used with office equipment, in particular for use with colour scanning and printing devices that have digital imaging capabilities, including multi-function devices.</p><p>ISO/IEC 17823:2015 is not intended to replace terms and definitions published in documents or user interfaces issued or created by manufacturers.</p>"

60612,IS,,ISO/IEC 17825:2016,Information technology — Security techniques — Testing methods for the mitigation of non-invasive attack classes against cryptographic modules,Techonologie de l'information — Techniques de sécurité — Methodes de test pour la protection contre les attaques non intrusives des modules cryptographiques,2016-01-04,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[82422],['en'],46,"<p>ISO/IEC 17825:2016 specifies the non-invasive attack mitigation test metrics for determining conformance to the requirements specified in ISO/IEC 19790 for Security Levels 3 and 4. The test metrics are associated with the security functions specified in ISO/IEC 19790. Testing will be conducted at t

60617,IS,,ISO/IEC 17826:2012,Information technology — Cloud Data Management Interface (CDMI),Technologies de l'information — Interface de management des données du nuage informatique (CDMI),2012-11-15,1,['35.210'],ISO/IEC JTC 1/SC 38,9599,,[70226],['en'],224,<p>ISO/IEC 17826:2012 specifies the interface to access cloud storage and to manage the data stored therein. It is applicable to developers who are implementing or using cloud storage.</p>

70226,IS,,ISO/IEC 17826:2016,Information technology — Cloud Data Management Interface (CDMI),Technologies de l'information — Interface de management des données du nuage informatique (CDMI),2016-07-11,2,['35.210'],ISO/IEC JTC 1,9599,[60617],[83451],['en'],259,<p>This CDMI International Standard is intended for application developers who are implementing or using cloud storage. It documents how to access cloud storage and to manage the data stored there.</p>

60759,IS,,ISO/IEC 17839-1:2014,Information technology — Biometric System-on-Card — Part 1: Core requirements,Technologies de l'information — Système biométrique sur carte — Partie 1: Exigences de base,2014-07-01,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[87667],['en'],6,"<div id='MathJax_Message' style='display: none;'></div><p>ISO/IEC 17839-1:2014 establishes</p><ul><li>functional architecture of a Biometric System-on-Card</li><li>definition of type S1 (fully ISO/IEC 7810 compliant) and type S2 implementation of a Biometric System-on-Card</li><li>sensor types in a Biometric System-on-Card</li><li>minimum requirements to a Biometric System-on-Card with respect to<ul><li>discriminative power

61918,IS,,ISO/IEC 17839-2:2015,Information technology — Biometric System-on-Card — Part 2: Physical characteristics,Technologies de l'information — Système biométrique sur carte — Partie 2: Caractéristiques physiques,2015-11-03,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[83865],['en'],6,"<p>ISO 17839-2:2015 defines the following:</p><p>- dimensions of a Biometric System-on-Card type S1 and type S2;</p><p>- position and size of the biometric capture device;</p><p>- minimum requirements to a Biometric System-on-Card with respect to</p><ul><li>- mechanical durability, and</li><li>? man-machine interface and ergonomics.</li></ul><p>The standardization of other on-card device

77182,IS,Amd,ISO/IEC 17839-2:2015/Amd 1:2021,Information technology — Biometric System-on-Card — Part 2: Physical characteristics — Amendment 1: Additional specifications for fingerprint biometric capture devices,Technologies de l'information — Système biométrique sur carte — Partie 2: Caractéristiques physiques — Amendement 1: Spécifications supplémentaires pour les capteurs d’empreintes digitales,2021-05-11,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[83865],['en'],5,

61919,IS,,ISO/IEC 17839-3:2016,Information technology — Identification cards — Biometric System-on-Card — Part 3: Logical information interchange mechanism,Technologies de l'information — Cartes d'identification — Système biométrique sur carte — Partie 3: Mécanisme d'échange de l'information logique,2016-10-26,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[87555],['en'],15,"<p>ISO/IEC 17839-3:2016</p><p>- logical data structures for a BSoC,</p><p>- enrolment procedures, and</p><p>- usage of commands and data structures defined in other ISO standards for BSoC.</p><p>ISO/IEC 17839-3.2016 does not define requirements for</p><p>- commands and data structures that apply to devices

31601,IS,,ISO/IEC 17876:2000,Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Private User Mobility (PUM) — Registration supplementary service,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseau privé à intégration de services — Protocole de signalisation d'interéchange — Mobilité de l'usager privé (PUM) — Service supplementaire d'enregistrement,2000-04-27,1,['33.040.35'],ISO/IEC JTC 1/SC 6,9599,,[36858],['en'],61,

31603,IS,,ISO/IEC 17878:2000,Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Private User Mobility (PUM) — Call handling additional network features,Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseau privé à intégration de services — Protocole de signalisation d'interéchange — Mobilité de l'usager privé (PUM) — Caractéristiques additionnelles de réseau de traitement d'appel,2000-04-27,1,['33.040.35'],ISO/IEC JTC 1/SC 6,9599,,[36859],['en'],46,

61206,IS,,ISO/IEC 17982:2012,Information technology — Telecommunications and information exchange between systems — Close Capacitive Coupling Communication Physical Layer (CCCC PHY),Technologies de l'information — Téléinformatique — Couche physique pour communication par couplage capacitif fermé,2012-07-31,1,['35.100.10'],ISO/IEC JTC 1/SC 6,9599,,[77362],['en'],40,<p>ISO 17982:2012 specifies the CCCC PHY for Full duplex and Broadcast communication in time slots on frequency division multiplex channels.</p>

61239,IS,,ISO/IEC 17991:2015,Information technology — Office equipment — Method for Measuring Scanning Productivity of Digital Multifunctional Devices,Technologie de l'information — Équipement d'Office — Méthode pour Productivité du Scanner d'Appareils Multifonctionnels Numériques,2015-03-04,1,['37.100.10'],ISO/IEC JTC 1/SC 28,9599,,[74690],['en'],27,"<p>ISO/IEC 17091:2015 specifies a method for determining scanning productivity by measuring 'scanning speed' and 'scan to network folder speed'. It includes test files, test setup procedure, test procedure, and the reporting requirements for the scanning productivity measurements. This International Standard is applicable to black and white (B&

34112,IS,,ISO/IEC 18000-1:2004,Information technology — Radio frequency identification for item management — Part 1: Reference architecture and definition of parameters to be standardized,Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 1: Architecture de référence et définition des paramètres à normaliser,2004-09-13,1,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,,[46145],['en'],73,"<p>ISO/IEC 18000-1:2004 defines the parameters to be determined in any Standardized Air Interface Definition in the ISO/IEC 18000 series. The subsequent parts of ISO/IEC 18000 provide the specific values for definition of the Air Interface Parameters for a parti

34113,IS,,ISO/IEC 18000-2:2004,Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz,Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 2: Paramètres de communications d'une interface d'air à moins de 135 kHz,2004-09-13,1,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,,[46146],['en'],71,"<p>ISO/IEC 18000-2:2004 defines the air interface for radio-frequency identification (RFID) devices operating below 135 kHz used in item management applications. Its purpose is to provide a common technical specification for RFID devices to allow for compatibility and to e

34114,IS,,ISO/IEC 18000-3:2004,"Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz","Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 3: Paramètres de communications d'une interface d'air à 13,56 MHz",2004-09-13,1,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,,[46147],['en'],145,"<p>ISO/IEC 18000-3:2004 provides physical layer, collision management system and protocol values for RFID systems for item identification in accordance with the requirements of ISO 18000-1. It relates solely to systems operating at 13,56 MHz.</p><p>ISO/IEC 18000-3:2004 has tw

46147,IS,,ISO/IEC 18000-3:2008,"Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz","Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 3: Paramètres de communications d'une interface d'air à 13,56 MHz",2008-08-29,2,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,[34114],[53424],['en'],122,"<p>ISO/IEC 18000 has been developed to provide a framework to define common communications protocols for Internationally useable frequencies for Radio Frequency Identification (RFID), and, where possible, to determine the use of the same protocols for all frequencies s

34115,IS,,ISO/IEC 18000-4:2004,"Information technology — Radio frequency identification for item management — Part 4: Parameters for air interface communications at 2,45 GHz","Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 4: Paramètres de communications d'une interface d'air à 2,45 GHz",2004-08-31,1,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,,[46148],['en'],98,"<p>ISO/IEC 18000-4:2004 defines the air interface for radio-frequency identification (RFID) devices operating in the 2,45 GHz Industrial, Scientific, and Medical (ISM) band used in item management applications. Its purpose is to provide a common technical specification for RFID

46148,IS,,ISO/IEC 18000-4:2008,"Information technology — Radio frequency identification for item management — Part 4: Parameters for air interface communications at 2,45 GHz","Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 4: Paramètres de communications d'une interface d'air à 2,45 GHz",2008-08-29,2,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,[34115],[62539],['en'],98,"<p>ISO/IEC 18000-4:2008 is one of a series of International Standards and Technical Reports developed for the identification of items (Item Management) using radio frequency identification (RFID) technology. </p><p>ISO/IEC 18000-4:2008 defines the 2,45 GHz protocols that

62539,IS,,ISO/IEC 18000-4:2015,"Information technology — Radio frequency identification for item management — Part 4: Parameters for air interface communications at 2,45 GHz","Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 4: Paramètres de communications d'une interface d'air à 2,45 GHz",2015-02-15,3,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,[46148],[68145],['en'],117,"<p>ISO/IEC 18000-4:2015 defines the air interface for radio frequency identification (RFID) devices operating in the 2,45 GHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID device

34117,IS,,ISO/IEC 18000-6:2004,Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz,Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 6: Paramètres de communications d'une interface d'air entre 860 MHz et 960 MHz,2004-08-31,1,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,,[46149],['en'],134,"<p>ISO/IEC 18000-6:2004 defines the air interface for radio-frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. Its purpose is to provide a common te

43923,IS,Amd,ISO/IEC 18000-6:2004/Amd 1:2006,Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz — Amendment 1: Extension with Type C and update of Types A and B,Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 6: Paramètres de communications d'une interface d'air entre 860 MHz et 960 MHz — Amendement 1: Extension avec Type C et mise à jour des Types A et B,2006-06-19,1,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,,[46149],['en'],124,

46149,IS,,ISO/IEC 18000-6:2010,Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz,Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 6: Paramètres de communications d'une interface d'air entre 860 MHz et 960 MHz,2010-11-24,2,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,"[43923,34117]",[59644],['en'],446,"<p>ISO/IEC 18000-6:2010 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common t

59644,IS,,ISO/IEC 18000-6:2013,Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General,"Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 6: Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Général",2013-01-16,3,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,[46149],[88535],['en'],9,"<p>ISO/IEC 18000-6:2013 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a

59643,IS,,ISO/IEC 18000-63:2013,Information technology — Radio frequency identification for item management — Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C,"Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 63: Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type C",2013-01-16,1,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,,[63675],['en'],292,"<p>ISO/IEC 18000-63:2013 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a co

63675,IS,,ISO/IEC 18000-63:2015,Information technology — Radio frequency identification for item management — Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C,"Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 63: Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Type C",2015-10-20,2,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,[59643],[78309],"['en','ru']",326,"<p>ISO/IEC 18000-3:2015 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It

37978,IS,,ISO/IEC 18000-7:2004,Information technology — Radio frequency identification for item management — Part 7: Parameters for active air interface communications at 433 MHz,Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 7: Paramètres de communications actives d'une interface d'air à 433 MHz,2004-08-31,1,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,,[43892],['en'],20,"<p>ISO/IEC 18000-7:2004 defines the air interface for radio-frequency identification (RFID) devices operating as an active RF Tag in the 433 MHz band used in item management applications. Its purpose is to provide a common technical specification for RFID devices that m

43892,IS,,ISO/IEC 18000-7:2008,Information technology — Radio frequency identification for item management — Part 7: Parameters for active air interface communications at 433 MHz,Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 7: Paramètres de communications actives d'une interface d'air à 433 MHz,2008-01-15,2,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,[37978],[50368],['en'],47,"<p>ISO/IEC 18000-7:2008 defines the air interface for radio frequency identification (RFID) devices operating as an active RF tag in the 433 MHz band used in item management applications. The purpose of ISO/IEC 18000-7:2008 is to provide a common technical specif

50368,IS,,ISO/IEC 18000-7:2009,Information technology — Radio frequency identification for item management — Part 7: Parameters for active air interface communications at 433 MHz,Technologies de l'information — Identification par radiofréquence pour la gestion d'objets — Partie 7: Paramètres de communications actives d'une interface d'air à 433 MHz,2009-07-23,3,['35.040.50'],ISO/IEC JTC 1/SC 31,9599,[43892],[57336],['en'],63,"<p>ISO/IEC 18000-7:2009 defines the air interface for radio frequency identification (RFID) devices operating as an active RF tag in the 433 MHz band used in item management applications. It provides a common technical specification for RFID devices that can be used by

30789,IS,,ISO/IEC 18004:2000,Information technology — Automatic identification and data capture techniques — Bar code symbology — QR Code,Technologies de l'information — Techniques d'identification automatique et de capture de données — Symboles de codes à barres — Code QR,2000-06-22,1,"['01.080.50','35.040.50']",ISO/IEC JTC 1/SC 31,9599,,[43655],['en'],114,

43655,IS,,ISO/IEC 18004:2006,Information technology — Automatic identification and data capture techniques — QR Code 2005 bar code symbology specification,"Technologies de l'information — Techniques automatiques d'identification et de capture des données — Spécification de symbologie de code à barres, code QR 2005",2006-08-31,2,"['01.080.50','35.040.50']",ISO/IEC JTC 1/SC 31,9599,[30789],[62021],['en'],114,"<p>ISO/IEC 18004:2006 defines the requirements for the symbology known as QR Code 2005. It specifies the QR Code 2005 symbology characteristics, data character encoding methods, symbol formats, dimensional characteristics, error correction rules, reference decoding algorithm, production q

52815,IS,Cor,ISO/IEC 18004:2006/Cor 1:2009,Information technology — Automatic identification and data capture techniques — QR Code 2005 bar code symbology specification — Technical Corrigendum 1,"Technologies de l'information — Techniques automatiques d'identification et de capture des données — Spécification de symbologie de code à barres, code QR 2005 — Rectificatif technique 1",2009-03-10,2,"['01.080.50','35.040.50']",ISO/IEC JTC 1/SC 31,9599,,[62021],['en'],7,

62021,IS,,ISO/IEC 18004:2015,Information technology — Automatic identification and data capture techniques — QR Code bar code symbology specification,Technologies de l'information — Technologie d'identification automatique et de capture des données — Spécification de la symbologie de code à barres Code QR,2015-02-16,3,"['01.080.50','35.040.50']",ISO/IEC JTC 1/SC 31,9599,"[43655,52815]",[83389],"['en','fr']",117,"<p>ISO/IEC 18004:2015 defines the requirements for the symbology known as QR Code. It specifies the QR Code symbology characteristics, data character encoding methods, symbol formats, dimensional characteristics, error correction rules, reference decoding algorithm, production qualit

31052,IS,,ISO/IEC 18010:2002,Information technology — Pathways and spaces for customer premises cabling,Technologies de l'information — Cheminements et espaces pour câblages des locaux des clients,2002-09-05,1,['35.200'],ISO/IEC JTC 1/SC 25,9599,,[55024],['en'],21,

36514,IS,Amd,ISO/IEC 18010:2002/Amd 1:2005,Information technology — Pathways and spaces for customer premises cabling — Amendment 1: Multi-tenant Pathways and Spaces,Technologies de l'information — Cheminements et espaces pour câblages des locaux des clients — Amendement 1: .,2005-12-16,1,['35.200'],ISO/IEC JTC 1/SC 25,9599,,[55024],['en'],21,

41920,IS,,ISO/IEC 18013-1:2005,Information technology — Personal identification — ISO-compliant driving licence — Part 1: Physical characteristics and basic data set,Technologies de l'information — Identification des personnes — Permis de conduire conforme à l'ISO — Partie 1: Caractéristiques physiques et jeu de données de base,2005-08-18,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[63798],['en'],75,"<p>ISO/IEC 18013-1:2005 establishes the design format and data content of an ISO-compliant driving licence (IDL) with regard to the human-readable (visual) features and the placement of ISO machine-readable technologies on the card. It creates a common basis for international use and mutual recogn

42199,IS,,ISO/IEC 18013-2:2008,Information technology — Personal identification — ISO-compliant driving licence — Part 2: Machine-readable technologies,Technologies de l'information — Identification des personnes — Permis de conduire conforme à l'ISO — Partie 2: Technologies lisibles par une machine,2008-05-07,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[70486],['en'],89,"<div id='MathJax_Message' style='display: none;'></div><p>ISO/IEC 18013-2:2008 establishes guidelines for the content and formatting of data stored on an ISO compliant driving licence (IDL) using machine-readable technologies. It creates a common basis for the international use of IDL data without restricting individual domes

59678,IS,Cor,ISO/IEC 18013-2:2008/Cor 1:2011,Information technology — Personal identification — ISO-compliant driving licence — Part 2: Machine-readable technologies — Technical Corrigendum 1,Technologies de l'information — Identification des personnes — Permis de conduire conforme à l'ISO — Partie 2: Technologies lisibles par une machine — Rectificatif technique 1,2011-11-30,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[70486],['en'],11,

50351,IS,,ISO/IEC 18013-3:2009,"Information technology — Personal identification — ISO-compliant driving licence — Part 3: Access control, authentication and integrity validation","Technologies de l'information — Identification des personnes — Permis de conduire conforme à l'ISO — Partie 3: Contrôle d'accès, authentification et validation d'intégrité",2009-03-09,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[72366],['en'],117,"<div id='MathJax_Message' style='display: none;'></div><p>ISO/IEC 18013 establishes guidelines for the design format and data content of an ISO-compliant driving licence (IDL) with regard to human-readable features (ISO/IEC 18013-1), machine-readable technologies (ISO/IEC

57823,IS,Amd,ISO/IEC 18013-3:2009/Amd 1:2012,"Information technology — Personal identification — ISO-compliant driving licence — Part 3: Access control, authentication and integrity validation — Amendment 1: Scanning area identifier — Optional machine readable zone","Technologies de l'information — Identification des personnes — Permis de conduire conforme à l'ISO — Partie 3: Contrôle d'accès, authentification et validation d'intégrité — Amendement 1: Identifiant de zone de lecture — Zone optionnelle lisible par machine",2012-07-17,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[72366],['en'],6,

59321,IS,Amd,ISO/IEC 18013-3:2009/Amd 2:2014,"Information technology — Personal identification — ISO-compliant driving licence — Part 3: Access control, authentication and integrity validation — Amendment 2: Extended Access Control v1","Technologies de l'information — Identification des personnes — Permis de conduire conforme à l'ISO — Partie 3: Contrôle d'accès, authentification et validation d'intégrité — Amendement 2: Extended Access Control v1",2014-11-20,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[72366],['en'],7,

59679,IS,Cor,ISO/IEC 18013-3:2009/Cor 1:2011,"Information technology — Personal identification — ISO-compliant driving licence — Part 3: Access control, authentication and integrity validation — Technical Corrigendum 1","Technologies de l'information — Identification des personnes — Permis de conduire conforme à l'ISO — Partie 3: Contrôle d'accès, authentification et validation d'intégrité — Rectificatif technique 1",2011-11-30,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[72366],['en'],43,

64602,IS,Cor,ISO/IEC 18013-3:2009/Cor 2:2013,"Information technology — Personal identification — ISO-compliant driving licence — Part 3: Access control, authentication and integrity validation — Technical Corrigendum 2","Technologies de l'information — Identification des personnes — Permis de conduire conforme à l'ISO — Partie 3: Contrôle d'accès, authentification et validation d'intégrité — Rectificatif technique 2",2013-11-13,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[72366],['en'],12,

53350,IS,,ISO/IEC 18013-4:2011,Information technology — Personal identification — ISO-compliant driving licence — Part 4: Test methods,Technologies de l'information — Identification des personnes — Permis de conduire conforme à l'ISO — Partie 4: Méthodes d'essai,2011-10-25,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[74961],['en'],330,"<p>ISO/IEC 18013-4:2011 specifies the test methods used for conformity testing, that is methods for determining whether a driving licence can be considered to comply with the requirements of ISO/IEC 18013 for:</p><ul><li>machine readable technologies (ISO/IEC 18013-2), and</li><li>access control, authentication and integrity validation (ISO/IEC 18013-3).</li></u

62828,IS,Cor,ISO/IEC 18013-4:2011/Cor 1:2013,Information technology — Personal identification — ISO-compliant driving licence — Part 4: Test methods — Technical Corrigendum 1,Technologies de l'information — Identification des personnes — Permis de conduire conforme à l'ISO — Partie 4: Méthodes d'essai — Rectificatif technique 1,2013-11-07,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[74961],['en'],19,

34386,IS,,ISO/IEC 18014-1:2002,Information technology — Security techniques — Time-stamping services — Part 1: Framework,Technologies de l'information — Techniques de sécurité — Services d'estampillage de temps — Partie 1: Cadre général,2002-10-17,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[50678],['en'],19,<p>ISO/IEC 18014-1:2002:</p><p>1. identifies the objective of a time-stamping authority;</p><p>2. describes a general model on which time-stamping services are based;</p><p>3. defines time-stamping services;</p><p>4. defines the basic protocols of time-stamping;</p><p>5. specifies the protocols between the involved entities.</p>

34387,IS,,ISO/IEC 18014-2:2002,Information technology — Security techniques — Time-stamping services — Part 2: Mechanisms producing independent tokens,Technologies de l'information — Techniques de sécurité — Services d'horodatage — Partie 2: Mécanismes produisant des jetons indépendants,2002-12-10,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[50482],['en'],28,"<p>ISO/IEC 18014-2:2002 describes time-stamping services producing independent tokens. It describes a general model for time-stamping services of this type and the basic components used to construct a time-stamping service of this type, it defines the data structures and protocols used to interact with a time-stamping service of this type, a

50482,IS,,ISO/IEC 18014-2:2009,Information technology — Security techniques — Time-stamping services — Part 2: Mechanisms producing independent tokens,Technologies de l'information — Techniques de sécurité — Services d'horodatage — Partie 2: Mécanismes produisant des jetons indépendants,2009-12-14,2,['35.030'],ISO/IEC JTC 1/SC 27,9599,[34387],[76155],['en'],28,"<p>ISO/IEC 18014-2:2009 presents a general framework for the provision of time-stamping services.</p><p>Time-stamping services may generate, renew and verify time-stamp tokens.</p><p>Time-stamp tokens are associations between data and points in time, and are created in a way that aims to provide evidence that the data existed at the a

34388,IS,,ISO/IEC 18014-3:2004,Information technology — Security techniques — Time-stamping services — Part 3: Mechanisms producing linked tokens,Technologies de l'information — Techniques de sécurité — Services d'horodatage — Partie 3: Mécanismes produisant des jetons liés,2004-02-09,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[50457],['en'],28,"<p>ISO/IEC 18014-3:2004 describes time-stamping services producing linked tokens, that is, tokens that are cryptographically bound to other tokens produced by these time-stamping services. It describes a general model for time-stamping services of this type and the basic components used to construct a time-stamping service of this type, it defines the da

30804,IS,,ISO/IEC 18019:2004,Software and system engineering — Guidelines for the design and preparation of user documentation for application software,Ingénierie du logiciel et du système — Lignes directrices pour la conception et la préparation de la documentation de l'utilisateur de logiciels d'application,2004-01-06,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[43073],['en'],146,"<p>ISO/IEC 18019:2004 provides guidelines for the design and preparation of user documentation for application software. It describes how to establish what information users need, how to determine the way in which that information should be presented to the users, and how then to prepare the information and make it ava

30810,IS,,ISO/IEC 18025:2005,Information technology — Environmental Data Coding Specification (EDCS),Technologies de l'information — Spécifications pour le codage des données environnementales,2005-05-26,1,['35.140'],ISO/IEC JTC 1/SC 24,9599,,[60505],['en'],227,"<p>ISO/IEC 18025:2004 provides mechanisms to unambiguously specify objects used to model environmental concepts. To accomplish this, a collection of nine EDCS dictionaries of environmental concepts and a functional interface are specified.</p>"

30811,IS,,ISO/IEC 18026:2006,Information technology — Spatial Reference Model (SRM),Technologies de l'information — Modèle spatial de référence (SRM),2006-06-15,1,['35.140'],ISO/IEC JTC 1/SC 24,9599,,[54166],['en'],103,"<p>ISO 18026:2005 specifies the Spatial Reference Model (SRM) defining relevant aspects of spatial positioning and related information processing. The SRM allows precise and unambiguous specification of geometric properties such as position (location), direction, and distance. The SRM addresses the needs of a broad community of users, who have a range of accuracy and performance requirements in computationally intensive applications.</p>"

50404,IS,Cor,ISO/IEC 18026:2006/Cor 1:2007,Information technology — Spatial Reference Model (SRM) — Technical Corrigendum 1,Technologies de l'information — Modèle spatial de référence (SRM) — Rectificatif technique 1,2007-11-15,1,['35.140'],ISO/IEC JTC 1/SC 24,9599,,[54166],['en'],3,

54166,IS,,ISO/IEC 18026:2009,Information technology — Spatial Reference Model (SRM),Technologies de l'information — Modèle de référence spatial (SRM),2009-07-13,2,['35.140'],ISO/IEC JTC 1/SC 24,9599,"[46574,30811,50404,52992,54165]","[56193,87028]",['en'],519,"<p>ISO/IEC 18026:2009 specifies the Spatial Reference Model (SRM) defining relevant aspects of spatial positioning and related information processing. The SRM allows precise and unambiguous specification of geometric properties such as position (location), direction, and distance. The SRM addresses the needs of a broad community of users, who have a range of accuracy and performance requirements in computationally intensive application

40008,IS,,ISO/IEC 18028-1:2006,Information technology — Security techniques — IT network security — Part 1: Network security management,Technologies de l'information — Techniques de sécurité — Sécurité de réseaux TI — Partie 1: Gestion de sécurité de réseau,2006-07-04,1,"['35.030','03.100.70']",ISO/IEC JTC 1/SC 27,9599,[31142],[51580],['en'],59,"<p>ISO/IEC 18028-1:2006 provides detailed guidance on the security aspects of the management, operation and use of information technology (IT) networks, and their interconnections. </p><p>It defines and describes the concepts associated with, and provides management guidance on, network security - including on how to identify and analyse the communic

40009,IS,,ISO/IEC 18028-2:2006,Information technology — Security techniques — IT network security — Part 2: Network security architecture,Technologies de l'information — Techniques de sécurité — Sécurité de réseaux TI — Partie 2: Architecture de sécurité de réseau,2006-02-03,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[51581],['en'],21,<p>ISO/IEC 18028-2:2006 defines a network security architecture for providing end-to-end network security. The architecture can be applied to various kinds of networks where end-to-end security is a concern and independently of the network's underlying technology. The objective of ISO/IEC 18028-2:2006 is to serve as a foundation for developing the detailed recommen

40010,IS,,ISO/IEC 18028-3:2005,Information technology — Security techniques — IT network security — Part 3: Securing communications between networks using security gateways,Technologies de l'information — Techniques de sécurité — Sécurité de réseaux TI — Partie 3: Communications de sécurité entre réseaux utilisant des portails de sécurité,2005-12-12,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[51583],['en'],22,"<p>ISO/IEC 18028-3:2005 provides an overview of security gateways through a description of different architectures.</p><p>It outlines the techniques for security gateways to analyse network traffic. The techniques discussed are as follows:</p><ul><li>packet filtering,</li><li>stateful pack

40012,IS,,ISO/IEC 18028-5:2006,Information technology — Security techniques — IT network security — Part 5: Securing communications across networks using virtual private networks,Technologies de l'information — Techniques de sécurité — Sécurité de réseaux TI — Partie 5: Communications sûres à travers les réseaux utilisant les réseaux privés virtuels,2006-07-05,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[51584],['en'],21,"<p>ISO/IEC 18028-5:2006 provides detailed guidance on the security aspects of the management, operation and use of IT networks, and their inter-connections.</p><p>ISO/IEC 18028-5:2006 defines techniques for securing inter-network connections that are established using virtual pr

30816,IS,,ISO/IEC 18031:2005,Information technology — Security techniques — Random bit generation,Technologies de l'information — Techniques de sécurité — Génération de bits aléatoires,2005-11-04,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[54945],['en'],124,"<p>ISO/IEC 18031:2005 specifies a conceptual model for a random bit generator for cryptographic purposes, together with the elements of this model.</p><p>ISO/IEC 18031:2005 also includes</p><ul><li>the description of the main elements required for a non-deterministic random bit generator;</li><li>the description of the main elements required for a deterministic random bit generator;</li><li>their characteristics; </li><li>their security requ

52087,IS,Cor,ISO/IEC 18031:2005/Cor 1:2009,Information technology — Security techniques — Random bit generation — Technical Corrigendum 1,Technologies de l'information — Techniques de sécurité — Génération de bits aléatoires — Rectificatif technique 1,2009-01-28,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[54945],['en'],3,

54945,IS,,ISO/IEC 18031:2011,Information technology — Security techniques — Random bit generation,Technologies de l'information — Techniques de sécurité — Génération de bits aléatoires,2011-11-08,2,['35.030'],ISO/IEC JTC 1/SC 27,9599,"[30816,52087]",[81645],['en'],142,"<p>ISO/IEC 18031:2011 specifies a conceptual model for a random bit generator for cryptographic purposes, together with the elements of this model.</p><p>ISO/IEC 18031:2011</p><ul><li>specifies the characteristics of the main elements required for a non-deterministic random bit generator,</li><li>specifies the characteristics of the main elements required for a deterministic random bit generator,</li><li>establishes the securi

63755,IS,Amd,ISO/IEC 18031:2011/Amd 1:2017,Information technology — Security techniques — Random bit generation — Amendment 1: Deterministic random bit generation,Technologies de l'information — Techniques de sécurité — Génération de bits aléatoires — Amendement 1: Génération déterministe de bits aléatoires,2017-03-06,2,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[81645],['en'],23,

66558,IS,Cor,ISO/IEC 18031:2011/Cor 1:2014,Information technology — Security techniques — Random bit generation — Technical Corrigendum 1,Technologies de l'information — Techniques de sécurité — Génération de bits aléatoires — Rectificatif technique 1,2014-09-19,2,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[81645],['en'],2,

30817,IS,,ISO/IEC 18032:2005,Information technology — Security techniques — Prime number generation,Technologies de l'information — Techniques de sécurité — Génération de nombres premiers,2005-02-02,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,"[64576,72009]",['en'],18,"<p>ISO/IEC 18032:2005 specifies methods for generating and testing prime numbers. Prime numbers are used in various cryptographic algorithms, mainly in asymmetric encryption algorithms and digital signature algorithms.</p><p>Firstly, ISO/IEC 18032:2005 specifies methods for testing whether a given number is prime. The testing methods included in ISO/IEC 18032:2005 can be divided into two groups:</p><ul><li>Probabilistic primality t

37970,IS,,ISO/IEC 18033-1:2005,Information technology — Security techniques — Encryption algorithms — Part 1: General,Technologies de l'information — Techniques de sécurité — Algorithmes de chiffrement — Partie 1: Généralités,2005-03-01,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[54530],['en'],8,"<p>ISO/IEC 18033 specifies encryption systems (ciphers) for the purpose of data confidentiality.</p><p>ISO/IEC 18033-1:2005 specifies:</p><ul><li>terms and definitions used throughout ISO/IEC 18033;</li><li>the purpose of encryption, the differences between symmetric and asymmetric ciphers, and the key management problems associated with the use of ciphers;</li><li>the uses and properties of encryption;

54528,IS,Amd,ISO/IEC 18033-1:2005/Amd 1:2011,Information technology — Security techniques — Encryption algorithms — Part 1: General — Amendment 1,Technologies de l'information — Techniques de sécurité — Algorithmes de chiffrement — Partie 1: Généralités — Amendement 1,2011-02-16,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[54530],['en'],1,

54530,IS,,ISO/IEC 18033-1:2015,Information technology — Security techniques — Encryption algorithms — Part 1: General,Technologies de l'information — Techniques de sécurité — Algorithmes de chiffrement — Partie 1: Généralités,2015-07-24,2,['35.030'],ISO/IEC JTC 1/SC 27,9599,"[54528,37970]",[76156],['en'],16,"<p>ISO/IEC 18033-1:2015 is general in nature, and provides definitions that apply in subsequent parts of this International Standard. The nature of encryption is introduced, and certain general aspects of its use and properties are described. The criteria used to select the algorithms specified in subsequent parts of this International Standard are defined in Annexes A and B.</p>" 54531,

37972,IS,,ISO/IEC 18033-3:2005,Information technology — Security techniques — Encryption algorithms — Part 3: Block ciphers,Technologies de l'information — Techniques de sécurité — Algorithmes de chiffrement — Partie 3: Chiffrement par blocs,2005-07-15,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[54531],['en'],71,"<p>ISO/IEC 18033 specifies encryption systems (ciphers) for the purpose of data confidentiality. </p><p>ISO/IEC 18033-3:2005 specifies block ciphers. A block cipher is a symmetric encipherment system with the property that the encryption algorithm operates on a block of plaintext, i.e. a string of bits of a defined length, to yield a block of ciphertext.</p><p>ISO/IEC 18033-3:2005 speci

44728,IS,Cor,ISO/IEC 18033-3:2005/Cor 1:2006,Information technology — Security techniques — Encryption algorithms — Part 3: Block ciphers — Technical Corrigendum 1,Technologies de l'information — Techniques de sécurité — Algorithmes de chiffrement — Partie 3: Chiffrement par blocs — Rectificatif technique 1,2006-08-22,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[54531],['en'],1,

46447,IS,Cor,ISO/IEC 18033-3:2005/Cor 2:2007,Information technology — Security techniques — Encryption algorithms — Part 3: Block ciphers — Technical Corrigendum 2,Technologies de l'information — Techniques de sécurité — Algorithmes de chiffrement — Partie 3: Chiffrement par blocs — Rectificatif technique 2,2007-08-16,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[54531],['en'],1,

46435,IS,Cor,ISO/IEC 18033-3:2005/Cor 3:2008,Information technology — Security techniques — Encryption algorithms — Part 3: Block ciphers — Technical Corrigendum 3: .,Technologies de l'information — Techniques de sécurité — Algorithmes de chiffrement — Partie 3: Chiffrement par blocs — Rectificatif technique 3: .,2008-03-18,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[54531],['en'],1,

39978,IS,,ISO/IEC 18033-4:2005,Information technology — Security techniques — Encryption algorithms — Part 4: Stream ciphers,Technologies de l'information — Techniques de sécurité — Algorithmes de chiffrement — Partie 4: Chiffrements en flot,2005-07-15,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[54532],['en'],43,"<p>ISO/IEC 18033-4:2005 specifies stream cipher algorithms. A stream cipher is an encryption mechanism that uses a keystream to encrypt a plaintext in bitwise or block-wise manner. A stream cipher is technically specified by choosing a keystream generator and a mode of stream ciphers.</p><p>ISO/IEC 18033-4:2005 specifies the following ways to generate keystream.</p><ul><li>Mechanisms ba

51024,IS,Amd,ISO/IEC 18033-4:2005/Amd 1:2009,Information technology — Security techniques — Encryption algorithms — Part 4: Stream ciphers — Amendment 1: Rabbit and Decim,Technologies de l'information — Techniques de sécurité — Algorithmes de chiffrement — Partie 4: Chiffrements en flot — Amendement 1: Rabbit et Decim,2009-12-15,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[54532],['en'],33,

38769,IS,,ISO/IEC 18041-4:2005,"Information technology — Computer graphics, image processing and environmental data representation — EDCS language binding — Part 4: C","Technologies de l'information — Infographie, traitement de l'image et représentation des données environnementales — Liaison du langage EDCS — Partie 4: C",2005-07-14,1,['35.140'],ISO/IEC JTC 1/SC 24,9599,,[45950],['en'],512,<p>ISO/IEC 18041-4:2004 specifies the binding of the application program interface (API) defined in ISO/IEC 18025 to the C programming language. Each part of ISO/IEC 18041 defines the binding of that abstract specification to a particular programming language. </p>

45950,IS,,ISO/IEC 18041-4:2007,"Information technology — Computer graphics, image processing and environmental data representation — Environmental Data Coding Specification (EDCS) language bindings — Part 4: C","Technologies de l'information — Infographie, traitement de l'image et représentation des données environnementales — Liaison du langage EDCS — Partie 4: C",2007-08-06,2,['35.140'],ISO/IEC JTC 1/SC 24,9599,[38769],[63738],['en'],61,"<p>ISO/IEC 18041-4:2007 specifies the binding of the application programming interface (API) defined in ISO/IEC 18025 to the C programming language.</p><p>The Environmental Data Coding Specification (EDCS) is a mapping between data and meaning. Data in a s

35394,IS,,ISO/IEC 18043:2006,"Information technology — Security techniques — Selection, deployment and operations of intrusion detection systems","Technologies de l'information — Techniques de sécurité — Sélection, déploiement et opérations des systèmes de détection d'intrusion",2006-06-19,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[56889],"['en','ru']",46,<p>ISO/IEC 18043:2006 provides guidance for an organization that decides to include an intrusion detection capability within its IT infrastructure. It is a 'how to' for managers and users who want to: understand the benefits and limitations of IDS; develop a strategy and implementation plan for IDS; effectively manage the outputs of an IDS; in

30830,IS,,ISO/IEC 18045:2005,Information technology — Security techniques — Methodology for IT security evaluation,Technologies de l'information — Techniques de sécurité — Méthodologie pour l'évaluation de sécurité TI,2005-10-07,1,['35.030'],ISO/IEC JTC 1/SC 27,9599,,[46412],['en'],276,"<p>ISO/IEC 18045:2005 is a companion document to ISO/IEC 15408, <i>Information technology --Security techniques -- Evaluation criteria for IT security</i>. ISO/IEC 18045 specifies the minimum actions to be performed by an evaluator in order to conduct an ISO/IEC 15408 evaluation, using the criteria and evaluation evidence defined in ISO/IEC 15408.</p>"