Withdrawn and superseded ISO standards — page 168 of 246

30332,IS,,ISO 8130-13:2001,Coating powders — Part 13: Particle size analysis by laser diffraction,Poudres pour revêtement — Partie 13: Analyse granulométrique par diffraction laser,2001-09-20,1,['87.040'],ISO/TC 35/SC 9,9599,,[68405],"['en','fr']",4,

37855,IS,,ISO 8130-14:2004,Coating powders — Part 14: Terminology,Poudres pour revêtement — Partie 14: Terminologie,2004-05-13,1,['87.040'],ISO/TC 35/SC 9,9599,,[68406],"['en','fr']",4,<p>ISO 8130-14:2004 defines special terms used in the field of coating powders.</p>

15201,IS,,ISO 8130-2:1992,Coating powders — Part 2: Determination of density by gas comparison pyknometer (referee method),Poudres pour revêtement — Partie 2: Détermination de la masse volumique à l'aide d'un pycnomètre à gaz (méthode de référence),1992-12-03,1,['87.040'],ISO/TC 35/SC 9,9599,,"[80807,68394]","['en','fr']",3,"<p>The method can be used for all types of coating powder, is simple to carry out, but requires more expensive instrumentation than is often used for density determinations. It is based on the determination of the volume of a weighed test portion by measuring the volume of the gas displaced. This is achieved by equalizing the pressure difference which arises due to the d

15202,IS,,ISO 8130-3:1992,Coating powders — Part 3: Determination of density by liquid displacement pyknometer,Poudres pour revêtement — Partie 3: Détermination de la masse volumique à l'aide d'un pycnomètre à déplacement de liquide,1992-12-03,1,['87.040'],ISO/TC 35/SC 9,9599,,"[80808,68395]","['en','fr']",3,<p>The method is based on a determination of the mass and the volume of a test portion. The pyknometer (in accordance with ISO 787-10) has to use a liquid that completely wets the product under test without swelling or dissolving it.</p>

15203,IS,,ISO 8130-4:1992,Coating powders — Part 4: Calculation of lower explosion limit,Poudres pour revêtement — Partie 4: Calcul de la limite inférieure d'explosibilité,1992-12-03,1,['87.040'],ISO/TC 35/SC 9,9599,,"[81403,68396]","['en','fr']",3,"<p>The lower explosion limit is the minimum concentration of the coating powder in air which will form an explosive mixture. The method is based on the knowledge of the gross calorific value of the product, as determined by the method described in ISO 1928, or on the gross calorific values of the constituents of the product. With powders that are not flammable the method may nevertheless give a value for the lower explosion limit in air.</p>" 152

15204,IS,,ISO 8130-5:1992,Coating powders — Part 5: Determination of flow properties of a powder/air mixture,Poudres pour revêtement — Partie 5: Détermination de l'aptitude à la fluidisation d'un mélange poudre/air,1992-12-17,1,['87.040'],ISO/TC 35/SC 9,9599,,"[80809,68397]","['en','fr']",6,"<p>The method specified reflects commercial practice in powder spraying. Its principle is placing, under draught-free conditions, a specified quantity of coating powder in a vessel and fluidizing it with clean dry air under standard conditions of atmospheric temperature and pressure. The height of the powder during and after fluidization is measured and the rate at which the fluidized powder flows throug

15205,IS,,ISO 8130-6:1992,Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature,Poudres pour revêtement — Partie 6: Détermination du temps de gélification à une température donnée de poudres thermodurcissables,1992-12-03,1,['87.040'],ISO/TC 35/SC 9,9599,,"[68398,80810]","['en','fr']",3,"<p>The method is based on heating a test portion of a specified volume to a specified temperature, normally 180 °C, in a depression in an electrically heated steel block and determination of the time at which threads can no longer be pulled from the molten product.</p>"

29497,IS,Amd,ISO 8130-6:1992/Amd 1:1998,Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature — Amendment 1,Poudres pour revêtement — Partie 6: Détermination du temps de gélification à une température donnée de poudres thermodurcissables — Amendement 1,1998-04-30,1,['87.040'],ISO/TC 35/SC 9,9599,,"[68398,80810]","['en','fr']",1,

15206,IS,,ISO 8130-7:1992,Coating powders — Part 7: Determination of loss of mass on stoving,Poudres pour revêtement — Partie 7: Détermination de la perte de masse à la cuisson,1992-12-03,1,['87.040'],ISO/TC 35/SC 9,9599,,[68399],"['en','fr']",3,"<p>The method described is a simple, practical test which provides sufficiently accurate results with coating powders that lose up to about 2 % (m/m). Any water present in the product under test is included in the test result. For any particular application, the test method needs to be completed by supplementary information.</p>"

15207,IS,,ISO 8130-8:1994,Coating powders — Part 8: Assessment of the storage stability of thermosetting powders,Poudres pour revêtement — Partie 8: Estimation de la stabilité au stockage des poudres thermodurcissables,1994-08-11,1,['87.040'],ISO/TC 35/SC 9,9599,,"[68400,80811]","['en','fr']",6,"<p>Deals with the estimation of the storage stability of thermosetting coating powders. Specifies the procedures for determining the changes both in the physical state of a thermosetting coating powder and in the chemical reactivity of the powder, together with its capacity to form a satisfactory final coating. The results of the procedures specified give an indication of the ability of the coating p

15209,IS,,ISO 8130-9:1992,Coating powders — Part 9: Sampling,Poudres pour revêtement — Partie 9: Échantillonnage,1992-12-03,1,['87.040'],ISO/TC 35/SC 9,9599,,[77808],"['en','fr']",4,<p>Describes methods for the sampling from consignments and for the subdivision of the sample into quantities suitable for undertaking appropriate test methods specified in the other parts of ISO 8130.</p>

15211,IS,,ISO 8131:1986,"Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) compact series — Tolerances",Transmissions hydrauliques — Vérins 160 bar (16 MPa) série compacte à simple tige — Tolerances,1986-07-17,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[15212],"['en','fr']",2,

15213,IS,,ISO 8132:1986,"Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series — Mounting dimensions for accessories","Transmissions hydrauliques — Vérins 160 bar (16 MPa) série moyenne et 250 bar (25 MPa), à simple tige — Dimensions d'interchangeabilité des accessoires",1986-12-04,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[37356],"['en','fr']",8,"<p>Lays down the dimensions required for the interchangeability of accessories. They have been designed specifically for use with cylinders manufactured in accordance with ISO 6020/1 and ISO 6022, but this does not limit their application. Covers the following accessories: rod clevis (figure 1, table 1); rod

37356,IS,,ISO 8132:2006,"Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series — Mounting dimensions for accessories","Transmissions hydrauliques — Vérins à simple tige, 16 MPa (160 bar) série moyenne et 25 MPa (250 bar) — Dimensions d'interchangeabilité des accessoires",2006-01-30,2,['23.100.20'],ISO/TC 131/SC 3,9599,"[15213,13539,13537]",[61341],"['en','fr']",11,"<p>ISO 8132:2006 lays down the mounting dimensions required for the interchangeability of accessories for the 16 MPa (160 bar) medium series cylinders in accordance with ISO 6020-1 and for the 25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been desig

61341,IS,,ISO 8132:2014,"Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series","Transmissions hydrauliques — Dimensions d'interchangeabilité des accessoires pour vérins à simple tige, 16 MPa (160 bar) série moyenne et 25 MPa (250 bar)",2014-11-14,3,['23.100.20'],ISO/TC 131/SC 3,9599,[37356],[81433],"['en','fr']",14,"<p>ISO 8132:2014 specifies the mounting dimensions required for the interchangeability of accessories for 16 MPa [160 bar] medium series cylinders in accordance with ISO 6020‑1 and for 25 MPa (250 bar) series cylinders, in accordance with ISO 6022. The accessories have been designed specifically

15214,IS,,ISO 8133:1991,"Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Accessory mounting dimensions","Transmissions hydrauliques — Vérins 16 MPa (160 bar) à simple tige, série compacte — Dimensions d'interchangeabilité des accessoires",1991-10-10,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[37357],"['en','fr']",12,<p>Specifies the mounting dimensions required for interchangeability of accessories which have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-2.</p>

37357,IS,,ISO 8133:2006,"Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Mounting dimensions for accessories","Transmissions hydrauliques — Vérins 16 MPa (160 bar) à simple tige, série compacte — Dimensions d'interchangeabilité des accessoires",2006-02-02,2,['23.100.20'],ISO/TC 131/SC 3,9599,"[13539,15214,26831]",[61342],"['en','fr']",14,"<p>ISO 8133:2006 specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit their application.</p><p>

61342,IS,,ISO 8133:2014,"Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series","Transmissions hydrauliques — Dimensions d'interchangeabilité des accessoires pour vérins, 16 MPa (160 bar) à simple tige, série compacte",2014-11-14,3,['23.100.20'],ISO/TC 131/SC 3,9599,[37357],[81432],"['en','fr']",16,"<p>ISO 8133:2014 specifies the mounting dimensions required for interchangeability of accessories for 16 MPa [160 bar)] compact cylinders conforming to ISO 6020-2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit their application.</p><p>ISO 813

15216,IS,,ISO 8135:1986,"Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series — Tolerances","Transmissions hydrauliques — Vérins 160 bar (16 MPa) série moyenne et 250 bar (25 MPa), à simple tige — Tolérances",1986-04-03,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[26830],"['en','fr']",2,

26830,IS,,ISO 8135:1999,"Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series — Tolerances","Transmissions hydrauliques — Vérins 16 MPa (160 bar) série moyenne et 25 MPa (250 bar), à simple tige — Tolérances",1999-03-11,2,['23.100.20'],ISO/TC 131/SC 3,9599,[15216],[40298],"['en','fr']",5,

15218,IS,,ISO 8137:1986,"Hydraulic fluid power — Single rod cylinders, 250 bar (25 MPa) series — Port dimensions",Transmissions hydrauliques — Vérins 250 bar (25 MPa) à simple tige — Dimensions des orifices,1986-11-27,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[36109],"['en','fr']",2,"<p>Lays down the port dimensions for cylinders as required for interchangeability of commonly used hydraulic cylinders. The table contains the bore sizes as follows: 50, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500 mm; and for square and rectangular flanges the nominal flange sizes (DN): 13, 19, 25, 32, 38 mm.</p>"

15219,IS,,ISO 8138:1986,"Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) compact series — Port dimensions",Transmissions hydrauliques — Vérins 160 bar (16 MPa) série compacte à simple tige — Dimensions des orifices,1986-04-17,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[26831],"['en','fr']",2,

26831,IS,,ISO 8138:1998,"Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Port dimensions",Transmissions hydrauliques — Vérins 16 MPa (160 bar) série compacte à simple tige — Dimensions des orifices,1998-06-11,2,['23.100.20'],ISO/TC 131/SC 3,9599,[15219],"[37357,37355]","['en','fr']",3,

15220,IS,,ISO 8139:1986,"Pneumatic fluid power — Cylinders, 10 bar (1 000 kPa) series — Rod end spherical eyes — Mounting dimensions",Transmissions pneumatiques — Vérins 10 bar (1 000 kPa) — Tenons à rotule d'extrémité de tige de piston — Dimensions d'interchangeabilité,1986-04-17,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[15221],"['en','fr']",3,

15221,IS,,ISO 8139:1991,"Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Rod end spherical eyes — Mounting dimensions",Transmissions pneumatiques — Vérins 1 000 kPa (10 bar) — Tenons à rotule d'extrémité de tige de piston — Dimensions d'interchangeabilité,1991-12-05,2,['23.100.20'],ISO/TC 131/SC 3,9599,[15220],[45725],"['en','fr']",4,"<p>Specifies the dimensions required for interchangeability. Table 1 gives the dimensions for rod end eyes with threads from M4 x 0,7 up to M48 x 2. This second edition cancels and replaces the first edition (1986). Annex A is for information only.</p>"

45725,IS,,ISO 8139:2009,"Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end spherical eyes","Transmissions pneumatiques — Vérins, série à 1 000 kPa (10 bar) — Dimensions d'interchangeabilité des tenons à rotule d'extrémité de tige",2009-03-24,3,['23.100.20'],ISO/TC 131/SC 3,9599,[15221],[72168],"['en','fr']",4,"<p>ISO 8139:2009 specifies the mounting dimensions required for interchangeability of rod-end spherical eyes of pneumatic cylinders. The rod-end spherical eyes have been designed specifically for use with 1 000 kPa (10 bar) series cylinders manufactured in accordance with ISO 6430, ISO 6432 and ISO 15552, but this does not limit their applica

5162,IS,,ISO 814:1974,Vulcanized rubber — Determination of adhesion to metal — Two-plate method,Élastomères vulcanisés — Détermination de l'adhérence au métal — Méthode à deux plaques,1974-06-01,1,['83.060'],ISO/TC 45,9599,,[5163],"['en','fr']",4,

5163,IS,,ISO 814:1986,"Rubber, vulcanized — Determination of adhesion to metal — Two-plate method",Caoutchouc vulcanisé — Détermination de l'adhérence au métal — Méthode à deux plaques,1986-09-18,2,['83.060'],ISO/TC 45/SC 2,9599,[5162],[20167],"['en','fr']",4,

20167,IS,,ISO 814:1996,"Rubber, vulcanized — Determination of adhesion to metal — Two-plate method",Caoutchouc vulcanisé — Détermination de l'adhérence au métal — Méthode à deux plaques,1996-09-19,3,['83.060'],ISO/TC 45/SC 2,9599,[5163],[45384],"['en','fr']",4,<p>Contains a method for determining the adhesion strength of rubber-to-metal bonds where the rubber part is between two parallel metal plates. Replaces the second edition.</p>

45384,IS,,ISO 814:2007,"Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence au métal — Méthode à deux plaques,2007-07-04,4,['83.060'],ISO/TC 45/SC 2,9599,[20167],[57720],"['en','fr']",5,"<p>ISO 814:2007 specifies a method for determining the adhesion strength of rubber-to-metal bonds where the rubber part is assembled between two parallel metal plates, using the adhesive system under investigation.</p><p>The method is applicable primarily to test pieces, prepared in the laboratory under standard conditions, such as can be used to provide data for the development of rubber compounds

57720,IS,,ISO 814:2011,"Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence au métal — Méthode à deux plaques,2011-11-21,5,['83.060'],ISO/TC 45/SC 2,9599,[45384],[72775],"['en','fr']",7,"<p>ISO 814:2011 specifies a method for determining the adhesion strength of rubber-to-metal bonds where the rubber part is assembled between two parallel metal plates, using the adhesive system under investigation.</p><p>The method is applicable primarily to test pieces, prepared in the laboratory under standard conditions, such as can be used to provide data for the development of rubber compounds

15222,IS,,ISO 8140:1986,"Pneumatic fluid power — Cylinders, 10 bar (1 000 kPa) series — Rod end clevis — Mounting dimensions",Transmissions pneumatiques — Vérins 10 bar (1 000 kPa) d'extrémité de tige de piston — Dimensions d'interchangeabilité,1986-04-17,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[15223],['en'],3,

15223,IS,,ISO 8140:1991,"Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Rod end clevis — Mounting dimensions",Transmissions pneumatiques — Vérins 1 000 kPa (10 bar) — Chapes d'extrémité de tige de piston — Dimensions d'interchangeabilité,1991-11-21,2,['23.100.20'],ISO/TC 131/SC 3,9599,[15222],[45726],"['en','fr']",4,"<p>Specifies the dimensions required for interchangeability. Table 1 gives the dimensions for rod end clevis with threads from M4 x 0,7 up to M48 x 2. This second edition cancels and replaces the first edition (1986). Annex A is for information only.</p>"

45726,IS,,ISO 8140:2009,"Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end clevises","Transmissions pneumatiques — Vérins, série à 1 000 kPa (10 bar) — Dimensions d'interchangeabilité des chapes d'extrémité de tige",2009-03-24,3,['23.100.20'],ISO/TC 131/SC 3,9599,[15223],[72169],"['en','fr']",4,"<p>ISO 8140 specifies the mounting dimensions required for interchangeability of rod-end clevises of pneumatic cylinders. The rod-end clevises have been designed specifically for use with 1 000 kPa (10 bar) series cylinders manufactured in accordance with ISO 6430, ISO 6432 and ISO 15552, but this does not limit their application.</p><p>The clevises are us

41488,IS,,ISO 81400-4:2005,Wind turbines — Part 4: Design and specification of gearboxes,Aérogénérateurs — Partie 4: Conception et spécifications relatives aux boîtes de vitesses,2005-09-29,1,"['21.200','27.180']",ISO/TC 60,9599,,[44298],"['en','fr']",94,"<p>ISO 81400-4:2005 establishes the design and specification of gearboxes for wind turbines with power capacities ranging from 40 kW to 2MW. It is applicable to all such parallel-axis, one-stage epicyclic and combined one-stage epicyclic and parallel shaft enclosed gearboxes. Its provisions are based on field experience with wind turbines having the above power capacities and configurations; its guidelines can be applied to higher capacity

43504,IS,Cor,ISO 81400-4:2005/Cor 1:2005,Wind turbines — Part 4: Design and specification of gearboxes — Technical Corrigendum 1,Aérogénérateurs — Partie 4: Conception et spécifications relatives aux boîtes de vitesses — Rectificatif technique 1,2005-12-07,1,"['21.200','27.180']",ISO/TC 60,9599,,[44298],['en'],1,

15227,IS,,ISO 8144-1:1995,Thermal insulation — Mineral wool mats for ventilated roof spaces — Part 1: Specification for applications with restricted ventilation,Isolation thermique — Feutres en laine minérale pour sous-toitures ventilées — Partie 1: Spécifications pour application dans des conditions de ventilation restreinte,1995-10-19,1,['91.100.60'],ISO/TC 163/SC 3,9599,,"[85646,66660,76854]","['en','fr']",25,<p>Specifies the properties and acceptable tolerances for bonded mineral wool thermal insulating mats. Provides limiting values for most of the properties; design values may be derived from these. The mats specified are for use within ventilated roof spaces of buildings where the ven

15228,IS,,ISO 8144-2:1995,Thermal insulation — Mineral wool mats for ventilated roof spaces — Part 2: Specification for horizontal applications with unrestricted ventilation,Isolation thermique — Feutres en laine minérale pour sous-toitures ventilées — Partie 2: Spécifications pour application horizontale avec ventilation libre,1995-10-19,1,['91.100.60'],ISO/TC 163/SC 3,9599,,"[66659,85647,76855]","['en','fr']",9,<p>Specifies the properties and acceptance tolerances for bonded mineral wool thermal insulating mats. The mats specified are only intended to be used for horizontal applications with unrestricted ventilation and are not designed to support any applied load.</p>

15229,IS,,ISO 8145:1994,Thermal insulation — Mineral wool board for overdeck insulation of roofs — Specification,Isolation thermique — Panneaux rigides en laine minérale pour l'isolation par l'extérieur des toitures-terrasses — Spécifications,1994-01-20,1,['91.100.60'],ISO/TC 163/SC 3,9599,,"[85648,76853,66658]","['en','fr']",23,"<p>Specifies the properties and acceptable tolerances as well as limiting values for most of them for bonded man-made mineral wool board for the overdeck insulation of roofs of buildings. The product is intended for roofs carrying foot traffic by maintenance personnel only. The properties to be declared by the manufacturer at the time of delivery are specified, as a

41349,IS,,ISO 815-1:2008,"Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente après compression — Partie 1: À températures ambiantes ou élevées,2008-01-28,1,['83.060'],ISO/TC 45/SC 2,9599,"[21732,5165]",[61761],"['en','fr']",10,"<p>ISO 815-1:2008 specifies methods for the determination of the compression set characteristics of vulcanized and thermoplastic rubbers at ambient or elevated temperatures.</p><p>The methods are intended to measure the ability of rubbers of hardness within the range 10 IRHD to 95 IRHD to retain their elastic properties

61761,IS,,ISO 815-1:2014,"Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente après compression — Partie 1: À températures ambiantes ou élevées,2014-08-20,2,['83.060'],ISO/TC 45/SC 2,9599,[41349],[74943],"['en','fr','ru']",13,"<p>ISO 815-1:2014 specifies methods for the determination of the compression set characteristics of vulcanized and thermoplastic rubbers at ambient (one method) or elevated temperatures (three methods, A, B, and C, depending on the way the test piece is released at the end of the test).</p><p>The methods are intended to m

5164,IS,,ISO 815:1972,Vulcanized rubbers — Determination of compression set under constant deflection at normal and high temperatures,Élastomères vulcanisés — Détermination de la déformation rémanente après compression sous déformation constante aux températures normale et élevée,1972-10-01,1,['83.060'],ISO/TC 45,9599,,[5165],"['en','fr']",3,

5165,IS,,ISO 815:1991,"Rubber, vulcanized or thermoplastic — Determination of compression set at ambient, elevated or low temperatures","Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente après compression aux températures ambiantes, élevées ou basses",1991-10-31,2,['83.060'],ISO/TC 45/SC 2,9599,"[6269,5164]","[41350,41349]","['en','fr']",10,<p>Specifies methods to measure the ability of rubbers (of hardnesses from 10 IRHD to 95 IRHD) to retain their elastic properties at specified temperatures. This second edition cancels and replaces the first edition (1972) and ISO 1653:1975.</p>

21732,IS,Cor,ISO 815:1991/Cor 1:1993,"Rubber, vulcanized or thermoplastic — Determination of compression set at ambient, elevated or low temperatures — Technical Corrigendum 1","Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente après compression aux températures ambiantes, élevées ou basses — Rectificatif technique 1",1993-04-01,2,['83.060'],ISO/TC 45/SC 2,9599,,"[41350,41349]","['en','fr']",2,<p>Replaces page 8 (for amendments in table 2).</p>

41350,IS,,ISO 815-2:2008,"Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente après compression — Partie 2: À basses températures,2008-01-28,1,['83.060'],ISO/TC 45/SC 2,9599,"[21732,5165]",[61762],"['en','fr']",8,"<p>ISO 815-2:2008 specifies a method for the determination of the compression set characteristics of vulcanized and thermoplastic rubbers at low temperatures.</p><p>The method is intended to measure the ability of rubbers of hardness within the range 10 IRHD to 95 IRHD to retain their elastic properties at specified temperatures after prolonged compr

61762,IS,,ISO 815-2:2014,"Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination de la déformation rémanente après compression — Partie 2: À basses températures,2014-11-05,2,['83.060'],ISO/TC 45/SC 2,9599,[41350],[74944],"['en','fr','ru']",16,"<p>ISO 815-2:2014 specifies two methods for the determination of the compression set characteristics of vulcanized and thermoplastic rubbers at low temperatures.</p><p>Method 1 derives from the methodology used in ISO 815‑1. Method 2 uses a specified testing device, allowing to measure and record the test piece thickness during recovery. Due to the lo

15239,IS,,ISO 8156:1987,Dried milk and dried milk products — Determination of insolubility index,Lait sec et produits laitiers en poudre — Détermination de l'indice d'insolubilité,1987-03-12,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[42069],"['en','fr']",7,"<p>The index determined by the method specified provides a means of assessing the solubility of dried whole milk, dried partly skimmed milk and dried skimmed milk. The method is also applicable to dried whey, dried buttermilk and dried milk-based baby food as well as to any dried products in which milk fat have been replaced by another fat or which have been roller-dried instead of spray-dried.</p>"

15240,IS,,ISO 8157:1984,Fertilizers and soil conditioners — Vocabulary,Matières fertilisantes — Vocabulaire,1984-12-01,1,"['01.040.65','65.080']",ISO/TC 134,9599,,[59567],"['en','fr']",16,"<p>Defines terms most frequently used. They are grouped under the following headings: 1. General terms 2. Terms relating to products 3. Terms relating to physical properties 4. Terms relating to physico-chemical properties. Attention is drawn to ISO 7851, Fertilizers and soil conditioners - Classification.</p>"

59567,IS,,ISO 8157:2015,Fertilizers and soil conditioners — Vocabulary,Engrais et amendements — Vocabulaire,2015-07-09,2,"['01.040.65','65.080']",ISO/TC 134,9599,[15240],[80949],"['en','fr']",20,<p>ISO 8157:2015 defines terms relating to fertilizers and soil conditioners.</p>

15243,IS,,ISO 8159:1987,Textiles — Morphology of fibres and yarns — Vocabulary,Textiles — Morphologie des fibres et fils — Vocabulaire,1987-04-02,1,"['59.080.20','59.060.01','01.040.59']",ISO/TC 38/SC 23,9599,,[89211],"['en','fr']",3,"<p>Defines the principal terms used to described the various forms into which textile fibres can be assembled, up to and including cabled yarns. Only contains terms of general application. Terms and/or definitions which are specific to particular fibres (such as hemp, silk, textile glass, metal fibre, carbon fibre, etc) are excluded.</p>"

5167,IS,,ISO 816:1983,"Rubber, vulcanized — Determination of tear strength of small test pieces (Delft test pieces)",Caoutchouc vulcanisé — Détermination de la résistance au déchirement des petites éprouvettes (éprouvettes de Delft),1983-12-01,2,['83.060'],ISO/TC 45/SC 2,9599,,[2194],"['en','fr']",5,

33246,IS,,ISO 8166:2003,Resistance welding — Procedure for the evaluation of the life of spot welding electrodes using constant machine settings,Soudage par résistance — Mode opératoire pour l'évaluation de la durée de vie des électrodes utilisées en soudage par points avec des réglages de machines constants,2003-05-26,1,['25.160.30'],ISO/TC 44/SC 6,9599,,[53809],"['en','fr']",12,"<p>ISO 8166:2003 specifies a procedure to be used for the evaluation of the life of spot welding electrodes when welding uncoated and coated steels, stainless steels, aluminium and aluminium alloys using constant machine settings which are not changed during the test. The procedure can also be used to establish the

15253,IS,,ISO 8167:1989,Projections for resistance welding,Bossages pour le soudage par résistance,1989-10-26,1,['25.160.30'],ISO/TC 44/SC 6,9599,,[72934],"['en','fr']",3,"<p>Specifies the characteristics and dimensions of projections for resistance welding. Includes also the appropriate design and dimensions for tools (see annex B). The projections may be used on either hot-rolled or cold-rolled, uncoated mild steel, of conventional welding quality and up to 3 mm thick, as single projections, in multiples or as a group of multiples.</p>"

15254,IS,,ISO 8168:1988,Aerospace — Corrosion- and heat-resisting steel bolts with strength classification 1 100 MPa and MJ threads — Procurement specification,"Aéronautique et espace — Vis en acier résistant à chaud et à la corrosion, de classe de résistance 1 100 MPa et à filetage MJ — Spécification d'approvisionnement",1988-02-04,1,['49.030.20'],ISO/TC 20/SC 4,9599,,"[31735,41817]","['en','fr']",14,"<p>Specifies the characteristics and quality assurance requirements for bolts with normal heads. Applies to bolts as defined, provided that reference is made to this International Standard in the product standard or definition document. Gives definitions, technical requirements and test method

41817,IS,,ISO 8168:2008,"Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa — Procurement specification","Aéronautique et espace — Vis à filetages MJ, en acier résistant à la chaleur et à la corrosion, de classe de résistance 1 100 MPa — Spécification d'approvisionnement",2008-08-11,2,['49.030.20'],ISO/TC 20/SC 4,9599,[15254],[66313],['en'],20,"<p>ISO 8168:2008 specifies the characteristics and quality assurance requirements for MJ threads bolts made of heat and corrosion resisting steel, of strength class 1 100 MPa, for aerospace construction.</p><p>ISO 8168:2008 is applicable whenever it is referenced in a definition document.</p>" 4181

66313,IS,,ISO 8168:2016,"Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa — Procurement specification","Aéronautique et espace — Vis à filetages MJ, en acier résistant à la chaleur et à la corrosion, de classe de résistance 1 100 MPa — Spécification d'approvisionnement",2016-08-10,3,['49.030.20'],ISO/TC 20/SC 4,9599,[41817],"[85983,81473]",['en'],21,"<p>ISO 8168:2016 the characteristics and quality assurance requirements for MJ thread bolts made of heat and corrosion resisting steel, of strength class 1 100 MPa, for aerospace construction.</p><p>It is applicable whenever it is referenced in a definition document.</p>"

5168,IS,,ISO 817:1974,Organic refrigerants — Number designation,Fluides frigorigènes organiques — Désignation numérique,1974-09-01,1,['71.100.45'],ISO/TC 86,9599,,"[38558,5169]","['en','fr']",4,"<p>Establishes a simple system of referring to common organic refrigerants instead of using the chemical name, formula or trade name. Although the use of a number is an accurate way of designating the refrigerant, there is no intention of precluding the use of a chemical name or formula. - Replaces ISO Recommendation R 817-1968.</p>"

38558,IS,,ISO 817:2005,Refrigerants — Designation system,Fluides frigorigènes — Système de désignation,2005-01-12,2,['71.100.45'],ISO/TC 86/SC 8,9599,[5168],"[40730,52433]",['en'],10,"<p>ISO 817:2005 provides an unambiguous system for numbering and assigning composition-designating prefixes to refrigerants. Tables listing the refrigerant designations are included. It is intended to be used with other relevant safety standards such as ISO 5149, IEC 603352-24 and IEC 60335-2-40.</p>"

52433,IS,,ISO 817:2014,Refrigerants — Designation and safety classification,Fluides frigorigènes — Désignation et classification de sécurité,2014-05-28,3,['71.100.45'],ISO/TC 86/SC 8,9599,[38558],"[68028,83452]",['en'],73,"<p>ISO 817:2014 provides an unambiguous system for assigning designations to refrigerants. It also establishes a system for assigning a safety classification to refrigerants based on toxicity and flammability data, and provides a means of determining the refrigerant concentration limit. </p>"

73250,IS,Amd,ISO 817:2014/Amd 1:2017,Refrigerants — Designation and safety classification — Amendment 1,Fluides frigorigènes — Désignation et classification de sécurité — Amendement 1,2017-11-13,3,['71.100.45'],ISO/TC 86/SC 8,9599,,[83452],['en'],2,

79053,IS,Amd,ISO 817:2014/Amd 2:2021,Refrigerants — Designation and safety classification — Amendment 2,Fluides frigorigènes — Désignation et classification de sécurité — Amendement 2,2021-04-08,3,['71.100.45'],ISO/TC 86/SC 8,9599,,[83452],['en'],7,

32064,IS,,ISO 81714-1:1999,Design of graphical symbols for use in the technical documentation of products — Part 1: Basic rules,Création de symboles graphiques à utiliser dans la documentation technique de produits — Partie 1: Règles fondamentales,1999-12-16,1,"['01.080.01','01.110']",ISO/TC 10/SC 10,9599,[8803],[42100],"['en','fr']",12,

15260,IS,,ISO 8173:1986,Light olefins for industrial use — Determination of molecular oxygen in gaseous phase — Electrochemical method with a membrane- covered cell,Oléfines légères à usage industriel — Dosage de l'oxygène moléculaire en phase gazeuse — Méthode électrochimique avec une cellule à membrane,1986-11-13,1,['71.080.10'],ISO/TC 47,9599,,[15261],"['en','fr']",5,"<p>After sampling and preparation of the laboratory sample the gaseous test portion is passed at a given rate through an electrochemical cell previously calibrated with air or with standard mixtures containing a known amount of oxygen, and the concentration of oxygen in the gaseous olefin is measured. The method is applicabl

15265,IS,,ISO 8177:1985,Aerospace — Omega clamps (saddle clamps) for fluid tubing installations — Dimensions,Aéronautique et espace — Colliers de fixation en oméga pour tuyauteries de fluides — Dimensions,1985-11-07,1,['49.080'],ISO/TC 20/SC 10,9599,,[15266],"['en','fr']",,

15266,IS,,ISO 8177:1986,Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions,Aéronautique et espace — Colliers en oméga pour systèmes de fluides — Dimensions,1986-11-27,2,['49.080'],ISO/TC 20/SC 10,9599,[15265],[66051],"['en','fr']",2,"<p>Includes maximum and minimum dimensions for clamps installed by means of two bolts with nominal diameters of 5 mm. The specified dimensions define a dimensional envelope. Shall not be considered as an interchangeability standard. The tolerances for each type of clamp are to be defined in the parts standards drawings. These clamps are intended for the installation, support and guiding of rigid tubing or hose assemblies.</p>"

66051,IS,,ISO 8177:2015,Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions,Aéronautique et espace — Colliers en oméga pour systèmes de fluides — Dimensions,2015-06-15,3,['49.080'],ISO/TC 20/SC 10,9599,[15266],[82077],['en'],3,<p>ISO 8177:2015 specifies maximum and minimum dimensions for omega clamps (saddle clamps) installed by means of two bolts with nominal diameters of 5 mm.</p><p>The specified dimensions define a dimensional envelope. This International Standard shall not be considered as an inter-changeability standard. The tolerances for each type of clamp are to be defined in the parts standards drawings.</p>

15268,IS,,ISO 8178-1:1996,Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 1: Mesurage des émissions de gaz et de particules au banc d'essai,1996-08-08,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,"[35090,42714]","['en','fr']",94,"<p>Specifies the measurement and evaluation methods for gaseous and particulate exhaust emission from reciprocating internal combustion engines under steady-state conditions on a test bed. Applies to engines for mobile, transportable and stationary use, excluding engine

42714,IS,,ISO 8178-1:2006,Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 1: Mesurage des émissions de gaz et de particules au banc d'essai,2006-09-14,2,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,[15268],"[64710,56184]","['en','fr']",124,"<p>ISO 8178-1:2006 specifies the measurement and evaluation methods for gaseous and particulate exhaust emissions from reciprocating internal combustion (RIC) engines under steady-state conditions on a test bed, necessary for determining one weighted value for e

64710,IS,,ISO 8178-1:2017,Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 1: Mesurage des émissions de gaz et de particules au banc d'essai,2017-04-20,3,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,[42714],[79330],"['en','fr']",150,"<p>ISO 8178-1:2017 specifies the measurement methods for gaseous and particulate exhaust emissions from reciprocating internal combustion (RIC) engines on a test bed, necessary for determining one weighted value for each exhaust gas pollutant. Various combinations of en

32824,IS,,ISO 8178-10:2002,Reciprocating internal combustion engines — Exhaust emission measurement — Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 10: Cycles et procédures d'essai pour le mesurage sur site des émissions de fumées de gaz d'échappement des moteurs à allumage par compression fonctionnant en régime transitoire,2002-11-15,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[72721],"['en','fr']",37,"<p>ISO 8178-10 specifies the measurement procedures and test cycles for th

37236,IS,,ISO 8178-11:2006,Reciprocating internal combustion engines — Exhaust emission measurement — Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 11: Mesurage au banc d'essai des émissions de gaz et de particules des gaz d'échappement de moteurs d'engins mobiles non routiers en régime transitoire,2006-03-29,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[56185],"['en','fr']",71,"<p>ISO 8178-11:2006 specifies the measurement and evaluation methods for gaseous and particulate exhaust emissio

15269,IS,,ISO 8178-2:1996,Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions at site,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 2: Mesurage des émissions de gaz et de particules sur site,1996-08-08,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[41171],"['en','fr']",22,"<p>Specifies the measurement and evaluation methods for gaseous and particulate exhaust emission from reciprocating internal combustion engines under steady-state conditions at site. Does preferably apply for engines used in marine installations, generators and diesel electric rail tra

41171,IS,,ISO 8178-2:2008,Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 2: Mesurage des émissions de gaz et de particules sur site,2008-04-07,2,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,[15269],[75546],"['en','fr']",19,"<p>ISO 8178-2:2008, together with ISO 8178-1 and ISO 8178-11, specifies the measurement and evaluation methods for gaseous and particulate exhaust emission from reciprocating internal combustion engines (RIC engines) under steady-state and transient conditions for

15270,IS,,ISO 8178-3:1994,Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 3: Définitions et méthodes de mesure de la fumée des gaz d'échappement dans des conditions stabilisées,1994-08-25,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[74451],"['en','fr']",6,"<p>Specifies two methods for the measurement of exhaust gas smoke characteristics of reciprocating internal combustion (RIC) engines operating under steady-state conditions. Does not deal with measurement under transie

15271,IS,,ISO 8178-4:1996,Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Test cycles for different engine applications,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 4: Cycles d'essai pour différentes applications des moteurs,1996-08-08,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[42275],"['en','fr']",18,"<p>Specifies the test cycles for the measurement and the evaluation of gaseous and particulate exhaust emissions from reciprocating internal combustion engines coupled to a dynamometer. With some restrictions the test can also be used for measurements at site. Applies to engines for mobile, transportabl

42275,IS,,ISO 8178-4:2007,Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state test cycles for different engine applications,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 4: Cycles d'essai en régime permanent pour différentes applications des moteurs,2007-12-06,2,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,[15271],"[65278,57016]","['en','fr']",25,"<p>ISO 8178-4:2007 specifies the test cycles for the measurement and the evaluation of gaseous and particulate exhaust emissions from reciprocating internal combustion (RIC) engines coupled to a dynamometer. With certain restrictions, this part of ISO 8178

65278,IS,,ISO 8178-4:2017,Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 4: Cycles d'essai en régimes permanent et transitoire pour différentes applications des moteurs,2017-04-20,3,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,[42275],[79199],"['en','fr']",237,"<p>ISO 8178-4:2017 specifies the test cycles, the test procedures and the evaluation of gaseous and particulate exhaust emissions from reciprocating internal combustion (RIC) engines coupled to a dynamometer. With certain restriction

15272,IS,,ISO 8178-5:1997,Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 5: Carburants d'essai,1997-08-07,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[39284],"['en','fr']",30,

39284,IS,,ISO 8178-5:2008,Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 5: Carburants d'essai,2008-10-02,2,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,[15272],[62420],"['en','fr']",36,"<p>ISO 8178-5:2008 specifies fuels whose use is recommended for performing the exhaust emission test cycles given in ISO 8178-4 and ISO 8178-11.</p><p>It is applicable to reciprocating internal combustion engines for mobile, transportable and stationary installations excluding engines for motor vehicles primarily designed for road use.</p><p>It may be applied to engin

62420,IS,,ISO 8178-5:2015,Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 5: Carburants d'essai,2015-11-16,3,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,[39284],[74082],"['en','fr']",41,"<p>ISO 8178-5:2015 specifies fuels whose use is recommended for performing the exhaust emission test cycles given in ISO 8178-4.</p><p>It is applicable to reciprocating internal combustion engines for mobile, transportable and stationary installations excluding engines for vehicles primarily designed for road use. This part of ISO 8178 may be applied to engines used,

22484,IS,,ISO 8178-6:2000,Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 6: Rapport de mesure et d'essai,2000-10-26,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[64711],"['en','fr']",18,

22485,IS,,ISO 8178-7:1996,Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 7: Détermination des familles de moteurs,1996-11-21,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[62077],"['en','fr']",3,"<p>Specifies the parameters to be applied for the determination of which engine specifications my be included in an engine group and for selection of the parent engine of the family. Applicable to engines used for power production, agricultural equipment, road construction, earth moving machines, rail traction and marine use, excluding engi

25557,IS,,ISO 8178-8:1996,Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 8: Détermination des groupes de moteurs,1996-11-21,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[62078],"['en','fr']",3,<p>Specifies the parameters to be applied for the determination of which engine specifications my be included in an engine group and for section of the parent engine of the family.</p>

25305,IS,,ISO 8178-9:2000,Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 9: Cycles et procédures d'essai pour le mesurage au banc d'essai des émissions de fumées de gaz d'échappement des moteurs alternatifs à combustion interne à allumage par compression fonctionnant en régime transitoire,2000-10-26,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[56091],"['en','fr']",42,

38259,IS,Amd,ISO 8178-9:2000/Amd 1:2004,Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions — Amendment 1,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 9: Cycles et procédures d'essai pour le mesurage au banc d'essai des émissions de fumées de gaz d'échappement des moteurs alternatifs à combustion interne à allumage par compression fonctionnant en régime transitoire — Amendement 1,2004-10-06,1,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,,[56091],"['en','

56091,IS,,ISO 8178-9:2012,Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions,Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie 9: Cycles et procédures d'essai pour le mesurage au banc d'essai des émissions de fumées de gaz d'échappement des moteurs alternatifs à combustion interne à allumage par compression fonctionnant en régime transitoire,2012-08-16,2,"['13.040.50','27.020']",ISO/TC 70/SC 8,9599,"[38259,25305]",[72721],"['en','fr']",52,"<p>ISO 8178-9:2012

24475,IS,,ISO 8179-1:1995,Ductile iron pipes — External zinc coating — Part 1: Metallic zinc with finishing layer,Tuyaux en fonte ductile — Revêtement extérieur au zinc — Partie 1: Zinc métallique et couche de finition,1995-12-27,1,['23.040.10'],ISO/TC 5/SC 2,9599,[15273],[35246],"['en','fr']",2,"<p>Deals with a factory-applied protective external coating system for centrifugally cast ductile iron pipes. This coating system comprises a metallic zinc layer followed by a bituminous paint as finishing layer. This edition replaces ISO 8179, which has been technically revised.</p>"

35246,IS,,ISO 8179-1:2004,Ductile iron pipes — External zinc-based coating — Part 1: Metallic zinc with finishing layer,Tuyaux en fonte ductile — Revêtement extérieur à base de zinc — Partie 1: Zinc métallique avec couche de finition,2004-05-28,2,['23.040.10'],ISO/TC 5/SC 2,9599,[24475],[64771],"['en','fr']",4,<p>ISO 8179-1:2004 deals with an external protective coating system which is factory applied to centrifugally cast ductile iron pipes as specified in ISO 2531 and ISO 7186. This coating system comprises a metallic zinc layer followed by a finishing layer.</p>

15273,IS,,ISO 8179:1985,Ductile iron pipes — External zinc coating,Tuyaux en fonte ductile — Revêtement extérieur au zinc,1985-04-04,1,['23.040.10'],ISO/TC 5/SC 2,9599,,"[24475,24476]","['en','fr']",2,

24476,IS,,ISO 8179-2:1995,Ductile iron pipes — External zinc coating — Part 2: Zinc rich paint with finishing layer,Tuyaux en fonte ductile — Revêtement extérieur au zinc — Partie 2: Peinture riche en zinc et couche de finition,1995-12-27,1,['23.040.10'],ISO/TC 5/SC 2,9599,[15273],[66367],"['en','fr']",2,"<p>Deals with a factory-applied protective external coating system for centrifugally cast ductile iron pipes. This coating system comprises a zinc rich paint with inorganic binder followed by a finishing layer. This edition replaces ISO 8179, which has been technically revised.</p>"

5170,IS,,ISO 818:1975,Fibre building boards — Definition — Classification,Panneaux de fibres — Définition — Classification,1975-01-01,1,"['79.060.20','01.040.79']",ISO/TC 89,9599,,[26708],"['en','fr']",1,"<p>The sheet material, generally exceeding 1.5 mm in thickness, shall be classified according to its density. The types of boards are subdivided into soft, medium and hard. Replaces ISO Recommendation R 818-1968 with which it is technically identical.</p>"

15274,IS,,ISO 8180:1985,Ductile iron pipes — Polyethylene sleeving,Canalisations en fonte ductile — Manche en polyéthylène,1985-03-14,1,['23.040.10'],ISO/TC 5/SC 2,9599,,[35247],"['en','fr']",2,"<p>Specifies the characteristics of polyethylene film, commonly called sleeving and used as additional protection against corrosion of pipelines particularly when laid in aggressive soil conditions. This film takes the form of a sheet or tube and is fitted around the pipes on site immediately before pipe laying.</p>"

35247,IS,,ISO 8180:2006,Ductile iron pipelines — Polyethylene sleeving for site application,Canalisations en fonte ductile — Manche en polyéthylène pour application sur site,2006-08-18,2,['23.040.10'],ISO/TC 5/SC 2,9599,[15274],[78367],"['en','fr']",3,"<p>ISO 8180:2006 specifies the characteristics of polyethylene film, commonly called sleeving, used as additional protection against corrosion for ductile iron pipelines, particularly when laid in aggressive soil conditions.</p><p>This film, the efficiency of which has been proved by experience, takes the form of a sheet or tube fitted around the pipes and fittings, on-site, immediately before pipe-laying.</p>"

15275,IS,,ISO 8185:1988,Humidifiers for medical use — Safety requirements,Humidificateurs médicaux — Exigences de sécurité,1988-03-24,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[22621],"['en','fr']",19,

22621,IS,,ISO 8185:1997,Humidifiers for medical use — General requirements for humidification systems,Humidificateurs médicaux — Exigences générales relatives aux systèmes d'humidification,1997-11-13,2,['11.040.10'],ISO/TC 121/SC 3,9599,[15275],[38527],"['en','fr']",39,

35415,IS,Cor,ISO 8185:1997/Cor 1:2001,Humidifiers for medical use — General requirements for humidification systems — Technical Corrigendum 1,Humidificateurs médicaux — Exigences générales relatives aux systèmes d'humidification — Rectificatif technique 1,2001-05-10,2,['11.040.10'],ISO/TC 121/SC 3,9599,,[38527],"['en','fr']",2,

38527,IS,,ISO 8185:2007,Respiratory tract humidifiers for medical use — Particular requirements for respiratory humidification systems,Humidificateurs respiratoires médicaux — Exigences spécifiques des systèmes d'humidification respiratoires,2007-06-26,3,['11.040.10'],ISO/TC 121/SC 3,9599,"[35415,22621]",[65008],"['en','fr','ru']",49,"<p>ISO 8185:2007 is a particular standard based on IEC 60601-1:1988 and its Amendments, Amd. 1:1991 and Amd. 2:1995.</p><p>ISO 8185:2007 includes requirements for the basic safety and essential performance of humidification systems. It also includes requirements for individual devices specified for use in humidification systems such as heated breathing tubes (h

15278,IS,,ISO 8187:1991,Household refrigerating appliances — Refrigerator-freezers — Characteristics and test methods,Réfrigérateurs à usage ménager — Réfrigérateurs-congélateurs — Caractéristiques et méthodes d'essai,1991-03-14,2,['97.040.30'],ISO/TC 86,9599,,[27428],"['en','fr']",52,"<p>Does not apply to refrigerator-freezers cooled by internal forced air circulation. The tests described are type tests. When it is necessary to verify the performance of a refrigerator-freezer of a given type, all the tests described should in principle be applied to one and the same unit. The tests can also be made individually for the study of a particular characteristic. Where no test method is specified,

22645,IS,Amd,ISO 8187:1991/Amd 1:1997,Household refrigerating appliances — Refrigerator-freezers — Characteristics and test methods — Amendment 1: compartments for the preservation of highly perishable foodstuffs,Réfrigérateurs à usage ménager — Réfrigérateurs-congélateurs — Caractéristiques et méthodes d'essai — Amendement 1: spéciaux destinés à l'entreposage des denrées hautement périssables,1997-12-11,2,['97.040.30'],ISO/TC 86,9599,,[27428],"['en','fr']",7,

15279,IS,,ISO 8188:1986,Textile machinery and accessories — Pitches of knitting machine needles,Matériel pour l'industrie textile — Écartements entre aiguilles de métiers à tricoter,1986-07-17,1,['59.120.40'],ISO/TC 72/SC 3,9599,,[43438],"['en','fr']",4,"<p>Specifies the pitches of needles for knitting machines. Defines needle pitch (distance between the centres of two adjacent needles in the same needle carrier, in millimetres) and gauge (number of needle pitches per 25.4 mm). The needle pitch may be used as a basis for assessment of fabrics knitted on these machines.</p>"