Withdrawn and superseded ISO standards — page 154 of 246

13683,IS,,ISO 7098:1991,Information and documentation — Romanization of Chinese,Information et documentation — Romanisation du chinois,1991-12-19,2,['01.140.10'],ISO/TC 46,9599,[13682],[61420],"['en','fr']",5,"<p>Explains the principles of romanization of Modern Chinese, the official language of the People's Republic of China. Annex A (Table of syllabic forms) forms an integral part of this standard.</p>"

3711,IS,,ISO 71:1977,"Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions","Cinématographie — Enregistrement sonore photographique négatif 16 mm sur film cinématographique de 16 mm, 35/16 mm et 35/32 mm — Emplacement et dimensions",1977-08-01,1,['37.060.20'],ISO/TC 36,9599,,[63974],"['en','fr']",3,

4923,IS,,ISO 710-5:1982,"Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 5: Representation of minerals","Symboles graphiques à utiliser sur les cartes, les plans et les coupes géologiques détaillés — Partie 5: Représentation des minéraux",1982-06-01,1,"['01.080.30','07.060']",ISO/TC 82,9599,,[4924],['en'],3,

4927,IS,,ISO 711:1978,Cereals and cereal products — Determination of moisture content — (Basic reference method),Céréales et produits céréaliers — Détermination de la teneur en eau — (Méthode de référence fondamentale),1978-11-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[4928],"['en','fr']",5,

4928,IS,,ISO 711:1985,Cereals and cereal products — Determination of moisture content (Basic reference method),Céréales et produits céréaliers — Détermination de la teneur en eau (Méthode de référence fondamentale),1985-12-19,2,['67.060'],ISO/TC 34/SC 4,9599,[4927],[41221],"['en','fr']",5,"<p>The method is not applicable to maize, for which an identical method is specified in the annex to ISO 6540. The method is idended to serve as a standard for checking and perfecting routine methods. It consists in , if necessary, grinding of a sample, after conditioning, if required, drying of a test portion under reduced pressure, at a temperatur between 45 and 50 C and in the presence of a desiccant, u

13696,IS,,ISO 7111:1987,Plastics — Thermogravimetry of polymers — Temperature scanning method,Plastiques — Thermogravimétrie des polymères — Méthode par examen de la température,1987-02-12,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[19311],['en'],5,

13697,IS,,ISO 7112:1982,Machinery for forestry — Portable brush saws — Vocabulary,Machines forestières — Débroussailleuses portatives — Vocabulaire,1982-09-01,1,"['65.060.80','01.040.65']",ISO/TC 23/SC 17,9599,,[25069],"['en','fr','ru']",7,

25069,IS,,ISO 7112:1999,Machinery for forestry — Portable hand-held brush-cutters and grass-trimmers — Vocabulary,Matériel forestier — Débroussailleuses et coupe-herbe portatifs — Vocabulaire,1999-09-09,2,"['65.060.80','01.040.65']",ISO/TC 23/SC 17,9599,[13697],[43392],"['en','fr','ru']",13,

43392,IS,,ISO 7112:2008,Machinery for forestry — Portable brush-cutters and grass-trimmers — Vocabulary,Matériel forestier — Débroussailleuses et coupe-herbe portatifs — Vocabulaire,2008-07-17,3,"['65.060.80','01.040.65']",ISO/TC 23/SC 17,9599,[25069],[69738],"['en','fr','ru']",15,"<p>ISO 7112:2008 defines terms relating to portable hand-held brush-cutters and grass-trimmers, their cutting attachments and power sources.</p>"

69738,IS,,ISO 7112:2017,Machinery for forestry — Portable brush-cutters and grass-trimmers — Vocabulary,Matériel forestier — Débroussailleuses et coupe-herbe portatifs — Vocabulaire,2017-01-05,4,"['65.060.80','01.040.65']",ISO/TC 23/SC 17,9599,[43392],[75694],"['en','fr']",7,"<p>ISO 7112:2017 defines terms relating to portable hand-held brush-cutters and grass-trimmers, their cutting attachments and power sources.</p><p>The brush-cutter position is shown in Annex A.</p>"

13698,IS,,ISO 7113:1982,Machinery for forestry — Brush saws — Saw blades — Dimensions and peripheral speed,Matériel forestier — Débroussailleuses — Lames de scie — Dimensions et vitesse périphérique,1982-07-01,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[13699],"['en','fr']",1,

13699,IS,,ISO 7113:1991,Forestry machinery — Portable brush-saws — Saw blades,Matériel forestier — Débroussailleuses portatives — Lames de scies,1991-11-07,2,['65.060.80'],ISO/TC 23/SC 17,9599,[13698],[26889],"['en','fr']",4,

13702,IS,,ISO 7116:1981,Road vehicles — Measurement method for the maximum speed of mopeds,Véhicules routiers — Méthode de mesurage de la vitesse maximale des cyclomoteurs,1981-07-01,1,['43.140'],ISO/TC 22,9599,,[1914],"['en','fr']",2,

1914,IS,,ISO 7116:1995,Mopeds — Measurement of maximum speed,Cyclomoteurs — Mesurage de la vitesse maximale,1995-02-23,2,['43.140'],ISO/TC 22,9599,[13702],[45397],"['en','fr']",5,"<p>Cancels and replaces the first edition (1981). Specifies the method of determining the maximum speed of a moped. Describes the preparation of test vehicle, the rider and riding position, test track and use, the atmospheric conditions, the test procedure and the calculation of average speed.</p>"

13703,IS,,ISO 7117:1981,Road vehicles — Measurement method for the maximum speed of motorcycles,Véhicules routiers — Méthode de mesurage de la vitesse maximale des motocycles,1981-06-01,1,['43.140'],ISO/TC 22,9599,,[1860],"['en','fr']",2,

1860,IS,,ISO 7117:1995,Motorcycles — Measurement of maximum speed,Motocycles — Mesurage de la vitesse maximale,1995-02-23,2,['43.140'],ISO/TC 22,9599,[13703],[50631],"['en','fr']",5,"<p>Cancels and replaces the first edition (1981). Specifies the method of determining the maximum speed of a motorcycle. Describes the preparation of test vehicle, the rider and riding position, test track and use, the atmospheric conditions, the test procedure and the calculation of average speed.</p>"

4930,IS,,ISO 712:1979,Cereals and cereal products — Determination of moisture content (Routine reference method),Céréales et produits céréaliers — Détermination de la teneur en eau (Méthode pratique de référence),1979-09-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[4931],"['en','fr']",3,

4931,IS,,ISO 712:1985,Cereals and cereal products — Determination of moisture content (Routine reference method),Céréales et produits céréaliers — Détermination de la teneur en eau (Méthode de référence pratique),1985-12-19,2,['67.060'],ISO/TC 34/SC 4,9599,[4930],[4932],"['en','fr']",3,

4932,IS,,ISO 712:1998,Cereals and cereal products — Determination of moisture content — Routine reference method,Céréales et produits céréaliers — Détermination de la teneur en eau — Méthode de référence pratique,1998-12-20,3,['67.060'],ISO/TC 34/SC 4,9599,[4931],"[44807,37552]","['en','fr']",7,

44807,IS,,ISO 712:2009,Cereals and cereal products — Determination of moisture content — Reference method,Céréales et produits céréaliers — Détermination de la teneur en eau — Méthode de référence,2009-10-30,4,['67.060'],ISO/TC 34/SC 4,9599,[4932],"[85395,71603]","['en','fr','ru']",16,"<p>ISO 712:2009 specifies a routine reference method for the determination of the moisture content of cereals and cereal products.</p><p>ISO 712:2009 applies to: wheat, rice (paddy, husked and milled), barley, millet (<i>Panicum miliaceum</i>), rye, oats, triticale, sorghum in the form of grains, milled grains, semolina or flour.</p><p>The method is not applicable to maize and pulses.</p>"

13707,IS,,ISO 7121:1986,Flanged steel ball valves,"Robinets à tournant sphérique en acier, à brides",1986-04-24,1,['23.060.20'],ISO/TC 153,9599,,[43496],"['en','fr']",9,"<p>Specifies requirements for nominal pressure ranges from ISO PN10 to ISO PN100 and nominal sizes from DN10 to DN500. Contains definitions and figures to illustrate them. Gives tables for body wall thickness, body and port inside diameter, effective diameters, and drain tappings. Includes an annex for information to be specified by purchaser.</p>"

43496,IS,,ISO 7121:2006,Steel ball valves for general-purpose industrial applications,Robinets en acier à tournant sphérique pour les applications industrielles générales,2006-05-11,2,['23.060.20'],ISO/TC 153,9599,[13707],[67848],['en'],23,"<p>ISO 7121:2006 specifies the requirements for a series of steel ball valves suitable for general-purpose industrial applications. It covers valves of the nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450, 500 (NPS 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 6, 8, 10, 12, 14, 16, 18 and 20), and is applicable to pressure designations Class 150, 300, 600, 900, and PN 10, 16, 25, 40, 63, 100.</p>" 43497

13713,IS,,ISO 7129:1982,"Earth-moving machinery — Tractors with dozer, graders, tractor scrapers — Cutting edges — Principal shapes and basic dimensions","Engins de terrassement — Tracteurs à lame, niveleuses, décapeuses — Bords coupants — Formes principales et dimensions de base",1982-08-01,1,['53.100'],ISO/TC 127/SC 3,9599,,[13714],"['en','fr']",11,

13714,IS,,ISO 7129:1989,"Earth-moving machinery — Tractors with dozer, graders, tractor scrapers — Cutting edges — Principal shapes and basic dimensions","Engins de terrassement — Tracteurs à lame, niveleuses, décapeuses — Bords coupants — Principales formes et dimensions de base",1989-02-02,2,['53.100'],ISO/TC 127/SC 3,9599,[13713],[26932],"['en','fr']",11,

13715,IS,,ISO 7130:1981,Earth-moving machinery — Guide to procedure for operator training,Engins de terrassement — Directives pour la procédure de formation du conducteur,1981-12-01,1,"['03.100.30','53.100']",ISO/TC 127/SC 3,9599,,[55300],"['en','fr']",7,"<p>Specifies the nature of operator training appropriate for earth-moving machinery. Does not specify any procedure for proficiency or assessment of competence of an operator's ability, since these factors are usually covered by local and national procedures and regulations. Applies to machines as defined in ISO 6165.</p>"

13716,IS,,ISO 7131:1984,Earth-moving machinery — Loaders — Terminology and commercial specifications,Engins de terrassement — Chargeuses — Terminologie et spécifications commerciales,1984-12-01,1,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,,[2117],"['en','fr']",24,

2117,IS,,ISO 7131:1997,Earth-moving machinery — Loaders — Terminology and commercial specifications,Engins de terrassement — Chargeuses — Terminologie et spécifications commerciales,1997-08-21,2,"['53.100','01.040.53']",ISO/TC 127/SC 4,9599,[13716],[42841],"['en','fr']",26,

33374,IS,Amd,ISO 7131:1997/Amd 1:2003,Earth-moving machinery — Loaders — Terminology and commercial specifications — Amendment 1,Engins de terrassement — Chargeuses — Terminologie et spécifications commerciales — Amendement 1,2003-05-13,2,"['53.100','01.040.53']",ISO/TC 127/SC 4,9599,,[42841],"['en','fr']",2,

13717,IS,,ISO 7132:1984,Earth-moving machinery — Dumpers — Terminology and commercial specifications,Engins de terrassement — Tombereaux — Terminologie et spécifications commerciales,1984-11-01,1,"['53.100','01.040.53']",ISO/TC 127/SC 4,9599,,[13718],"['en','fr']",13,

13719,IS,Amd,ISO 7132:1984/Amd 1:1985,Earth-moving machinery — Dumpers — Terminology and commercial specifications — Amendment 1,Engins de terrassement — Tombereaux — Terminologie et spécifications commerciales — Amendement 1,1985-12-05,1,"['53.100','01.040.53']",ISO/TC 127/SC 4,9599,,[13718],,,

13718,IS,,ISO 7132:1990,Earth-moving machinery — Dumpers — Terminology and commercial specifications,Engins de terrassement — Tombereaux — Terminologie et spécifications commerciales,1990-08-23,2,"['53.100','01.040.53']",ISO/TC 127/SC 4,9599,"[13719,13717]",[26883],"['en','fr']",13,<p>Establishes terminology and the content of commercial literature specifications for self-propelled dumpers. Applies to dumpers as defined in ISO 6165. Covers i.a. base machine and performance terminology and contains an annex.</p>

13720,IS,,ISO 7133:1985,Earth-moving machinery — Tractor-scrapers — Terminology and commercial specifications,Engins de terrassement — Décapeuses — Terminologie et spécifications commerciales,1985-12-06,1,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,,[13721],"['en','fr']",12,

22197,IS,Amd,ISO 7133:1985/Amd 1:1993,Earth-moving machinery — Tractor-scrapers — Terminology and commercial specifications — Amendment 1,Engins de terrassement — Décapeuses — Terminologie et spécifications commerciales — Amendement 1,1993-04-01,1,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,,[13721],"['en','fr']",1,

13721,IS,,ISO 7133:1994,Earth-moving machinery — Tractor-scrapers — Terminology and commercial specifications,Engins de terrassement — Décapeuses — Terminologie et spécifications commerciales,1994-07-07,2,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,"[22197,13720]",[51831],"['en','fr']",11,"<p>Establishes terminology and the content of commercial literature specifications for self-propelled tractor-scrapers, and their equipment. Applies to tractor-scrapers as defined in ISO 6165. Covers the base machine, attachment, and performance terminology and contains an annex.</p>"

13722,IS,,ISO 7134:1985,Earth-moving machinery — Graders — Terminology and commercial specifications,Engins de terrassement — Niveleuses — Terminologie et spécifications commerciales,1985-12-19,1,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,,[13723],"['en','fr']",18,

13723,IS,,ISO 7134:1993,Earth-moving machinery — Graders — Terminology and commercial specifications,Engins de terrassement — Niveleuses — Terminologie et spécifications commerciales,1993-11-04,2,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,[13722],[51832],"['en','fr']",13,"<p>Establishes terminology and the content of commercial literature specifications for self-propelled graders and their equipment. Applies to graders as defined in ISO 6165. Covers the base machine, attachments, and performance terminology and contains two annexes.</p>"

27219,IS,Cor,ISO 7134:1993/Cor 1:1996,Earth-moving machinery — Graders — Terminology and commercial specifications — Technical Corrigendum 1,Engins de terrassement — Niveleuses — Terminologie et spécifications commerciales — Rectificatif technique 1,1996-06-06,2,"['53.100','01.040.53']",ISO/TC 127/SC 4,9599,,[51832],"['en','fr']",1,<p>Replaces the existing figure 18 in subclause 3.7.4.</p>

13724,IS,,ISO 7135:1993,Earth-moving machinery — Hydraulic excavators — Terminology and commercial specifications,Engins de terrassement — Pelles hydrauliques — Terminologie et spécifications commerciales,1993-07-29,1,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,,"[42842,23796]","['en','fr']",48,"<p>Establishes terminology (for base machine, equipment and attachments) and the content of commercial literature specifications (engine, hydraulic system, system fluid capacities, filter system, tracks or tyres, brakes, operating mass, shipping mass) for self-propelled crawler and wheeled hydraulic excavators, and their equipment.</p>"

13725,IS,,ISO 7136:1986,Earth-moving machinery — Pipelayers — Terminology and commercial specifications,Engins de terrassement — Tracteurs poseurs de canalisations — Terminologie et spécifications commerciales,1986-10-09,1,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,,[20171],"['en','fr']",8,

20171,IS,,ISO 7136:1998,Earth-moving machinery — Pipelayers — Definitions and commercial specifications,Engins de terrassement — Tracteurs poseurs de canalisations — Définitions et spécifications commerciales,1998-07-16,2,"['53.100','01.040.53']",ISO/TC 127/SC 4,9599,[13725],[37781],"['en','fr']",13,

13726,IS,,ISO 7137:1981,Aircraft — Environmental conditions and test procedures for airborne equipment,Aéronautique — Conditions d'environnement et procédures d'essai pour les équipements embarqués,1981-10-01,1,['49.020'],ISO/TC 20,9599,,[13727],"['en','fr']",1,

13727,IS,,ISO 7137:1987,Aircraft — Environmental conditions and test procedures for airborne equipment,Aéronautique — Conditions d'environnement et procédures d'essai pour les équipements embarqués,1987-05-07,2,['49.020'],ISO/TC 20,9599,"[7638,7639,7643,13726,7635,7647,7637]",[13728],"['en','fr']",2,

13728,IS,,ISO 7137:1992,Aircraft — Environmental conditions and test procedures for airborne equipment,Aéronefs — Conditions d'environnement et procédures d'essai pour les équipements embarqués,1992-12-17,3,['49.020'],ISO/TC 20,9599,"[13727,7636]",[22551],"['en','fr']",3,

13729,IS,,ISO 7138:1984,Cross-country skis — Determination of mass and location of balance point,Skis de fond — Détermination de la masse et de l'emplacement du point d'équilibre,1984-10-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[72502],"['en','fr']",2,"<p>Specifies laboratory measurement methods for the characteristics mentioned above. If laboratory measurement data are determined and published by manufacturers, standard measurement procedures are recommended to ensure comparability.</p>"

13730,IS,,ISO 7139:1984,Cross-country skis — Determination of elastic properties,Skis de fond — Détermination des caractéristiques élastiques,1984-11-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[72500],"['en','fr']",3,"<p>Specifies the apparatus, sampling and conditioning and the procedure for laboratory measuring methods to determine the elastic properties. Applies for cross-country skis with a nominal length greater than or equal to 150 cm. Standard measurement procedures are recommended in order to ensure the comparability between measurement data determined by the manufacturers.</p>"

13732,IS,,ISO 7141:1981,Road vehicles — Wheels — Impact test procedure,Véhicules routiers — Roues — Méthode d'essai de choc,1981-10-01,1,['43.040.50'],ISO/TC 22,9599,,"[20560,13733]","['en','fr']",3,

20560,IS,Cor,ISO 7141:1981/Cor 1:1992,Road vehicles — Wheels — Impact test procedure — Technical Corrigendum 1,Véhicules routiers — Roues — Méthode d'essai de choc — Rectificatif technique 1,1992-05-14,1,['43.040.50'],ISO/TC 22,9599,"[20560,13732]","[20560,13733]","['en','fr']",2,

13733,IS,,ISO 7141:1995,Passenger cars — Light alloy wheels — Impact test,Voitures particulières — Roues en alliage léger — Essai de choc,1995-11-16,2,['43.040.50'],ISO/TC 22,9599,"[20560,13732]",[39422],"['en','fr']",3,"<p>States a laboratory test procedure to evaluate the axial (lateral) kerb impact collision properties of a wheel manufactured either wholly or partly of light alloys. It is intended for passenger car applications, with the purpose of screening and/or quality control of the wheel.</p>"

39422,IS,,ISO 7141:2005,Road vehicles — Light alloy wheels — Impact test,Véhicules routiers — Roues en alliage léger — Essai de choc,2005-07-04,3,['43.040.50'],ISO/TC 22/SC 33,9599,[13733],"[81468,72677]","['en','fr','ru']",4,"<p>ISO 7141:2005 specifies a laboratory test procedure to evaluate the axial (lateral) kerb impact collision properties of a wheel manufactured either wholly or partly of light alloys. It is intended for passenger car applications, and special vehicle applications where the wheel may impact the kerb, with the purpose of screening and/or quality control of the wheel.</p>"

13734,IS,,ISO 7142:1984,Binders for paints and varnishes — Epoxy resins — General methods of test,Liants pour peintures et vernis — Résines époxydiques — Méthodes générales d'essai,1984-12-01,1,['87.060.20'],ISO/TC 35,9599,,"[44642,20359]","['en','fr']",4,<p>The test methods to be applied to an individual epoxy resin shall be agreed between the interested parties. IS also applicable to solutions made from epoxy resins; the methods described are not intended for epoxy esters. The determination of the hydroxyl value of these resins is given in the annex.</p>

44642,IS,,ISO 7142:2007,Binders for paints and varnishes — Epoxy resins — General methods of test,Liants pour peintures et vernis — Résines époxydiques — Méthodes générales d'essai,2007-01-22,2,['87.060.20'],ISO/TC 35,9599,[13734],[83331],"['en','fr','ru']",7,"<p>ISO 7142:2007 specifies general methods of test for epoxy resins for use in paints, varnishes and similar products. It is also applicable to those solutions made from epoxy resins that are intended for use as binders for paints and varnishes.</p><p>The test methods described are not intended for epoxy esters.</p>"

13735,IS,,ISO 7143:1982,Binders for paints and varnishes — Aqueous dispersions of polymers and copolymers — General methods of test,Liants pour peintures et vernis — Dispersions aqueuses de polymères et de copolymères — Méthodes générales d'essai,1982-12-01,1,['87.060.20'],ISO/TC 35,9599,,[26995],"['en','fr']",1,

26995,IS,,ISO 7143:2000,Binders for paints and varnishes — Methods of test for characterizing water-based coating materials and binders,Liants pour peintures et vernis — Méthodes d'essai pour caractériser les produits de peinture et liants à base d'eau,2000-07-06,2,['87.060.20'],ISO/TC 35,9599,[13735],[44647],"['en','fr']",3,

36100,IS,,ISO 7146-1:2008,Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 1: General,Paliers lisses — Aspect et caractérisation de l'endommagement des paliers métalliques à couche lubrifiante fluide — Partie 1: Généralités,2008-10-06,1,['21.100.10'],ISO/TC 123/SC 2,9599,[13738],[77226],['en'],51,"<p>ISO 7146-1:2008 defines, describes and classifies the characteristics of damage occurring in service to hydrodynamically lubricated metallic plain bearings and journals. It assists in the understanding of the various characteristics of damage which may occur.</p><p>Consideration is restricted to damage characteristics which have a well-defined a

13738,IS,,ISO 7146:1993,"Plain bearings — Terms, characteristics and causes of damage and changes in appearance","Paliers lisses — Termes, caractéristiques et causes de détérioration et de changement d'aspect",1993-04-08,1,"['21.100.10','01.040.21']",ISO/TC 123/SC 2,9599,,"[40940,36100]","['en','fr']",71,"<p>Defines, describes and classifies the characteristics and causes of damage and changes in appearance occurring in service in hydrodynamically lubricated plain bearings and journals. Consideration is restricted to characteristic forms of change and damage which have a well-defined appearance and which can be attributed to particular causes with a high degree of certainty. The features pec

40940,IS,,ISO 7146-2:2008,Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 2: Cavitation erosion and its countermeasures,Paliers lisses — Aspect et caractérisation de l'endommagement des paliers métalliques à couche lubrifiante fluide — Partie 2: Érosion de cavitation et sa contre-mesure,2008-10-06,1,['21.100.10'],ISO/TC 123/SC 2,9599,[13738],[77225],['en'],18,"<p>ISO 7146-2:2008 defines, describes and classifies the characteristics of damage occurring in service in hydrodynamically lubricated metallic plain bearings due to cavitation erosion, together with possible countermeasures. It assists in understanding the various characteristic form

13740,IS,,ISO 7148-1:1985,Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of the friction and wear behaviour of bearing material/mating material/oil combinations under conditions of boundary lubrication,Paliers lisses — Essai du comportement tribologique des matériaux antifriction — Partie 1: Essai du comportement au frottement et à l'usure des ensembles matériau antifriction/matériau conjugué/huile dans les conditions de lubrification limite,1985-03-14,1,['21.100.10'],ISO/TC 123/SC 2,9599,,[24713],"['en','fr']",6,

24713,IS,,ISO 7148-1:1999,Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals,Paliers lisses — Essai du comportement tribologique des matériaux antifriction — Partie 1: Essai des matériaux métalliques,1999-10-28,2,['21.100.10'],ISO/TC 123/SC 2,9599,[13740],[53709],"['en','fr']",9,

53709,IS,,ISO 7148-1:2012,Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals,Paliers lisses — Essai du comportement tribologique des matériaux antifriction — Partie 1: Essai des matériaux métalliques,2012-10-01,3,['21.100.10'],ISO/TC 123/SC 2,9599,[24713],"[80047,88051]",['en'],11,"<p>1 Scope</p><p>This part of ISO 7148 specifies tribological tests of metallic bearing materials for plain bearings under conditions of boundary lubrication.</p><p>The test procedures described in this part of ISO 7148 enable the friction and wear behaviour of bearing material/mating/lubricant combinations to be compared with that of other combinations,

20994,IS,,ISO 7148-2:1999,Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials,Paliers lisses — Essai du comportement tribologique des matériaux antifriction — Partie 2: Essai des matériaux pour paliers à base de polymère,1999-10-28,1,['21.100.10'],ISO/TC 123/SC 2,9599,"[13739,17906,15404]",[53710],"['en','fr']",19,

53710,IS,,ISO 7148-2:2012,Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials,Paliers lisses — Essai du comportement tribologique des matériaux antifriction — Partie 2: Essai des matériaux pour paliers à base de polymère,2012-10-01,2,['21.100.10'],ISO/TC 123/SC 2,9599,[20994],"[80048,88052]",['en'],25,"<p>This part of ISO 7148 specifies tribological tests of polymer-based plain bearing materials under specified working conditions, i.e. load, sliding velocity and temperature, with and without lubrication. From the test results, data are obtained which indicate the relative tribological behaviour of metal-polymer and

13744,IS,,ISO 7151:1983,Instruments for surgery — Haemostatic forceps — Requirements,Instruments chirurgicaux — Pinces hémostatiques — Exigences,1983-11-01,1,['11.040.30'],ISO/TC 170,9599,,[13745],"['en','fr']",3,

13745,IS,,ISO 7151:1988,"Surgical instruments — Non-cutting, articulated instruments — General requirements and test methods","Instruments chirurgicaux — Instruments articulés, non tranchants — Spécifications générales et méthodes d'essai",1988-11-24,2,['11.040.30'],ISO/TC 170,9599,[13744],[83673],"['en','fr']",3,"<p>Specification of basic requirements for as well physical characteristics as workmanship, of the steel grades used and heat treatment of component parts, excluding rivets, screws and parts manufactured of material grade M.</p>"

13746,IS,,ISO 7152:1984,Camping tents — Nomenclature,Tentes de camping — Nomenclature,1984-08-01,1,"['97.200.30','01.040.97']",ISO/TC 83,9599,,[13747],"['en','fr','ru']",31,

13747,IS,,ISO 7152:1997,Camping tents and caravan awnings — Vocabulary and list of equivalent terms,Tentes de camping et auvents de caravane — Vocabulaire et liste de termes équivalents,1997-02-13,2,"['97.200.30','01.040.97']",ISO/TC 83,9599,[13746],"[83189,72737]","['en','fr']",41,"<p>Contains a list of the most frequent terms relating to camping tents and caravan awnings together with some definitions. It also gives the relevant terms used in ISO 5912:1993, ISO 8936:1988 and ISO 8937:1991. Replaces the first edition.</p>"

38589,IS,Amd,ISO 7152:1997/Amd 1:2006,Camping tents and caravan awnings — Vocabulary and list of equivalent terms — Amendment 1,Tentes de camping et auvents de caravane — Vocabulaire et liste de termes équivalents — Amendement 1,2006-03-23,2,"['97.200.30','01.040.97']",ISO/TC 83,9599,,"[83189,72737]","['en','fr']",2,

13748,IS,,ISO 7153-1:1983,Instruments for surgery — Metallic materials — Part 1: Stainless steel,Instruments chirurgicaux — Matériaux métalliques — Partie 1: Acier inoxydable,1983-11-01,1,"['11.040.30','77.140.20']",ISO/TC 170,9599,,[13749],"['en','fr']",3,

13749,IS,,ISO 7153-1:1991,Surgical instruments — Metallic materials — Part 1: Stainless steel,Instruments chirurgicaux — Matériaux métalliques — Partie 1: Acier inoxydable,1991-03-28,2,"['11.040.30','77.140.20']",ISO/TC 170,9599,[13748],[66850],"['en','fr']",4,"<p>This second edition cancels and replaces the first edition (ISO 7153-1:1983): it has been extended to include dental instruments. Contains a survey and a selection of stainless steels available for use in the manufacture of surgical, dental and specific instruments for orthopaedic surgery. It takes into account steel grades and chemical compositions.</p>"

23266,IS,Amd,ISO 7153-1:1991/Amd 1:1999,Surgical instruments — Metallic materials — Part 1: Stainless steel — Amendment 1,Instruments chirurgicaux — Matériaux métalliques — Partie 1: Acier inoxydable — Amendement 1,1999-03-11,2,"['11.040.30','77.140.20']",ISO/TC 170,9599,,[66850],"['en','fr']",1,

4937,IS,,ISO 716:1986,Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K),Matériaux métalliques — Essai de dureté — Contrôle des machines d'essai de dureté Rockwell (échelles A - B - C - D - E - F - G - H - K),1986-12-19,1,['77.040.10'],ISO/TC 164/SC 3,9599,,[26048],"['en','fr']",5,

13758,IS,,ISO 7162:1992,Performance standards in building — Contents and format of standards for evaluation of performance,Normes de performance dans le bâtiment — Contenu et format des normes pour l'évaluation des performances,1992-02-19,1,['91.040.01'],ISO/TC 59,9599,,[63999],"['en','fr']",5,<p>Establishes some rules for the contents and presentation of standards for evaluation in buildings. Intended for application by international and national standards committees.</p>

13762,IS,,ISO 7165:1999,Fire fighting — Portable fire extinguishers — Performance and construction,Lutte contre l'incendie — Extincteurs portatifs — Performances et construction,1999-12-16,1,['13.220.10'],ISO/TC 21/SC 2,9599,,[44094],"['en','fr']",43,

34923,IS,Amd,ISO 7165:1999/Amd 1:2004,Fire fighting — Portable fire extinguishers — Performance and construction — Amendment 1: Class F,Lutte contre l'incendie — Extincteurs portatifs — Performances et construction — Amendement 1: Classe F,2004-05-11,1,['13.220.10'],ISO/TC 21/SC 2,9599,,[44094],"['en','fr']",6,

37345,IS,Amd,ISO 7165:1999/Amd 2:2004,Fire fighting — Portable fire extinguishers — Performance and construction — Amendment 2,Lutte contre l'incendie — Extincteurs portatifs — Performances et construction — Amendement 2,2004-05-03,1,['13.220.10'],ISO/TC 21/SC 2,9599,,[44094],"['en','fr']",8,

44094,IS,,ISO 7165:2009,Fire fighting — Portable fire extinguishers — Performance and construction,Lutte contre l'incendie — Extincteurs portatifs — Performances et construction,2009-03-03,2,['13.220.10'],ISO/TC 21/SC 2,9599,"[34923,13762,37345]",[65987],['en'],58,"<p>ISO 7165:2009 specifies the principal requirements intended to ensure the safety, reliability and performance of portable fire extinguishers.</p><p>It is applicable to a fully charged extinguisher having a maximum mass of 20 kg. Subject to local acceptance, application to extinguishers having a total mass of up to 25 kg when fully charged is permitted.</p>"

13765,IS,,ISO 7168:1985,Air quality — Presentation of ambient air quality data in alphanumerical form,Qualité de l'air — Présentation sous forme alphanumérique des données relatives à la qualité de l'air ambiant,1985-11-07,1,['13.040.20'],ISO/TC 146/SC 4,9599,,"[13766,27081]","['en','fr']",8,

13767,IS,,ISO 7169:1984,Aerospace construction — Separable tube fittings for fluid systems — General specification,Constructions aérospatiales — Raccordements séparables de tubes pour systèmes de fluides — Spécifications générales,1984-09-01,1,['49.080'],ISO/TC 20/SC 10,9599,,[13768],"['en','fr']",13,

13768,IS,,ISO 7169:1993,Aerospace fluid systems — Separable tube fittings for 24 degrees cone — General specification,Circuits de fluides pour l'aérospatiale — Raccordements séparables de tubes à cône de 24 degrés — Spécifications générales,1993-05-06,2,['49.080'],ISO/TC 20/SC 10,9599,[13767],[1414],"['en','fr']",13,

1414,IS,,ISO 7169:1998,"Aerospace — Separable tube fittings for fluid systems, 24 degrees cone — General specification",Aéronautique et espace — Raccordements séparables de tubes à cône de 24 degrés pour circuits de fluides — Spécifications générales,1998-10-01,3,['49.080'],ISO/TC 20/SC 10,9599,[13768],[40006],"['en','fr']",15,

40006,IS,,ISO 7169:2007,"Aerospace — Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa — Procurement specification, inch/metric","Aéronautique et espace — Raccordements séparables de tubes à cône de 24 degrés pour circuits de fluides jusqu'à 3 000 psi ou 21 000 kPa — Spécification d'approvisionnement, inch/métrique",2007-01-10,4,['49.080'],ISO/TC 20/SC 10,9599,[1414],[66050],['en'],20,<p>ISO 7169:2007 specifies performance and quality requirements for the qualification and manufacture of standard 24° cone fittings and manufacture of 24° cone fittings to ensure reliable performance or equivalent inch-dimensioned fitting ends to ensure

4939,IS,,ISO 717-1:1982,Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation in buildings and of interior building elements,Acoustique — Évaluation de l'isolement acoustique des immeubles et des éléments de construction — Partie 1: Isolement des immeubles et des éléments intérieurs de construction aux bruits aériens,1982-12-01,1,['91.120.20'],ISO/TC 43/SC 2,9599,[4938],[4940],"['en','fr']",3,

4940,IS,,ISO 717-1:1996,Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation,Acoustique — Évaluation de l'isolement acoustique des immeubles et des éléments de construction — Partie 1: Isolement aux bruits aériens,1996-12-05,2,['91.120.20'],ISO/TC 43/SC 2,9599,"[4939,4943]",[51968],"['en','fr']",15,"<p>Defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors and windows. Takes into consideration the different sound level spectra of various noise sources. Gives rules for determining these quantities from the results of measurements carried out in one-third-octav

39289,IS,Amd,ISO 717-1:1996/Amd 1:2006,Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation — Amendment 1: Rounding rules related to single number ratings and single number quantities,Acoustique — Évaluation de l'isolement acoustique des immeubles et des éléments de construction — Partie 1: Isolement aux bruits aériens — Amendement 1: Règles d'arrondissement associées aux évaluations de numéro simple et aux quantités de numéro simple,2006-08-10,2,['91.120.20'],ISO/TC 43/SC 2,9599,,[51968],"['en','fr']",3,

51968,IS,,ISO 717-1:2013,Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation,Acoustique — Évaluation de l'isolement acoustique des immeubles et des éléments de construction — Partie 1: Isolement aux bruits aériens,2013-02-19,3,['91.120.20'],ISO/TC 43/SC 2,9599,"[39289,4940]","[69866,77435]","['en','fr']",18,"<p>ISO 717-1:2013: a) defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows; b) takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building and traffic outside a building; c) g

4941,IS,,ISO 717-2:1982,Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation,Acoustique — Évaluation de l'isolement acoustique des immeubles et des éléments de construction — Partie 2: Transmission des bruits de chocs,1982-12-01,1,['91.120.20'],ISO/TC 43/SC 2,9599,[4938],[4942],"['en','fr']",7,

4942,IS,,ISO 717-2:1996,Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation,Acoustique — Évaluation de l'isolement acoustique des immeubles et des éléments de construction — Partie 2: Protection contre le bruit de choc,1996-12-05,2,['91.120.20'],ISO/TC 43/SC 2,9599,[4941],[51969],"['en','fr']",12,"<p>Defines single-number quantities for the impact sound insulation in buildings and of floors. Gives rules for determining these quantities from the results of measurements carried out in one-third-octave bands in accordance with ISO 140-6 and ISO 140-7, and in octave bands in accordance with ISO-140-7 for field measurements only. It also

39148,IS,Amd,ISO 717-2:1996/Amd 1:2006,Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation — Amendment 1: .,Acoustique — Évaluation de l'isolement acoustique des immeubles et des éléments de construction — Partie 2: Protection contre le bruit de choc — Amendement 1: .,2006-08-10,2,['91.120.20'],ISO/TC 43/SC 2,9599,,[51969],"['en','fr']",5,

51969,IS,,ISO 717-2:2013,Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation,Acoustique — Évaluation de l'isolement acoustique des immeubles et des éléments de construction — Partie 2: Protection contre le bruit de choc,2013-02-19,3,['91.120.20'],ISO/TC 43/SC 2,9599,"[4942,39148]",[69867],"['en','fr']",17,"<p>ISO 717-2:2013: a) defines single-number quantities for impact sound insulation in buildings and of floors; b) gives rules for determining these quantities from the results of measurements carried out in one-third-octave bands in accordance with ISO 10140-3 and ISO 140-7, and in octave bands in accord-ance with that option in IS

4943,IS,,ISO 717-3:1982,Acoustics — Rating of sound insulation in buildings and of building elements — Part 3: Airborne sound insulation of facade elements and facades,Acoustique — Évaluation de l'isolement acoustique des immeubles et des éléments de construction — Partie 3: Isolement des éléments de façade et des façades aux bruits aériens,1982-12-01,1,['91.120.20'],ISO/TC 43/SC 2,9599,[4938],[4940],"['en','fr']",3,

13769,IS,,ISO 7170:1993,Furniture — Storage units — Determination of strength and durability,Ameublement — Éléments de rangement — Détermination de la résistance et de la durabilité,1993-10-14,1,['97.140'],ISO/TC 136,9599,,[38718],"['en','fr']",16,"<p>Describes test methods for determining the strength and durability (mainly regarding fatigue and wear) of storage units that are fully assembled and ready for use, including their movable and non-movable parts. Assessment of ageing and degradation is not included. The tests consist of the application of loads, forces and velocities simulating normal functional use as well as misuse to be expected and are designed to evaluate properties without

38718,IS,,ISO 7170:2005,Furniture — Storage units — Determination of strength and durability,Ameublement — Éléments de rangement — Détermination de la résistance et de la durabilité,2005-12-09,2,['97.140'],ISO/TC 136,9599,[13769],"[76864,66897]","['en','fr','ru']",32,"<p>ISO 7170:2005 specifies test methods for determining the strength and durability of storage units that are fully assembled and ready for use, including their movable and non-movable parts. The tests consist of the application, to various parts of the unit, of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur.</p><p>The test results are only valid for

13770,IS,,ISO 7171:1988,Furniture — Storage units — Determination of stability,Ameublement — Éléments de rangement — Détermination de la stabilité,1988-05-26,1,['97.140'],ISO/TC 136,9599,,[66309],"['en','fr']",3,"<p>The specified methods are applicable to free-standig storage furniture including cupboards, cabinets and bookshelves that are fully assembled and ready for use. Wall-mounted or otherwise built-in units are not covered. The test results are only valid for the article tested. When they are intended to be applied to other similar articles, the test specimen should be representative of the production model. Otherwise the test should be carried out as far as possible as described and

66309,IS,,ISO 7171:2019,Furniture — Storage units — Test methods for the determination of stability,Ameublement — Éléments de rangement — Méthodes d'essai pour la détermination de la stabilité,2019-02-05,2,['97.140'],ISO/TC 136,9599,[13770],[76864],['en'],19,<p>This document specifies test methods for determining the stability of free-standing storage units that are fully assembled and ready for use.</p><p>The test results are only valid for the unit/component tested. These results can be used to represent the performance of production models provided that the tested model is representative of the production model.</p><p>This document specifies test methods only. It does not specify requirem

13771,IS,,ISO 7172:1988,Furniture — Tables — Determination of stability,Ameublement — Tables — Détermination de la stabilité,1988-05-05,1,['97.140'],ISO/TC 136,9599,,"[62199,55268]","['en','fr']",2,

13772,IS,,ISO 7173:1989,Furniture — Chairs and stools — Determination of strength and durability,Ameublement — Chaises et tabourets — Détermination de la résistance et de la durabilité,1989-06-29,1,['97.140'],ISO/TC 136,9599,,"[62195,73866]","['en','fr']",20,"<p>Test methods are described for all types of chairs, easy chairs and stools except reclining or tilted chairs in the reclined or tilted position and chairs for specific fields of use. Assessment of ageing and degradation and tests for stuffing materials, upholstery fabrics or foam cushions are not included. The tests are designed to be applied to articles that are fully assembled and ready for use. Forces and dimensions therein are ap

13775,IS,,ISO 7175-1:1997,Children's cots and folding cots for domestic use — Part 1: Safety requirements,Lits fixes et lits pliants pour enfants à usage domestique — Partie 1: Exigences de sécurité,1997-08-14,1,['97.140'],ISO/TC 136,9599,,"[52794,69430]","['en','fr']",7,

13776,IS,,ISO 7175-2:1988,Furniture — Children's cots — Safety requirements and testing — Part 2: Test methods,Ameublement — Lits d'enfants — Exigences de sécurité et essais — Partie 2: Méthodes d'essai,1988-07-21,1,"['97.140','97.190']",ISO/TC 136,9599,,[21151],"['en','fr']",8,

21151,IS,,ISO 7175-2:1997,Children's cots and folding cots for domestic use — Part 2: Test methods,Lits fixes et lits pliants pour enfants à usage domestique — Partie 2: Méthodes d'essai,1997-08-14,2,['97.140'],ISO/TC 136,9599,[13776],"[52795,69431]","['en','fr']",13,

13777,IS,,ISO 7176-1:1986,Wheelchairs — Part 1: Determination of static stability,Fauteuils roulants — Partie 1: Détermination de la stabilité statique,1986-11-13,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[21410],"['en','fr']",3,

21410,IS,,ISO 7176-1:1999,Wheelchairs — Part 1: Determination of static stability,Fauteuils roulants — Partie 1: Détermination de la stabilité statique,1999-10-14,2,['11.180.10'],ISO/TC 173/SC 1,9599,[13777],[56817],"['en','fr']",14,