Withdrawn and superseded ISO standards — page 108 of 246

9199,IS,,ISO 3719:1994,Mechanical vibration — Symbols for balancing machines and associated instrumentation,Vibrations mécaniques — Symboles pour les machines à équilibrer et l'instrumentation,1994-08-25,2,"['21.120.40','01.080.20']",ISO/TC 108/SC 2,9599,[9198],[56563],"['en','fr','ru']",42,<p>Cancels and replaces the first edition (1982). Establishes symbols for use on balancing machines including instrumentation. They are intended to complement those already standardized in documents such as ISO 7000. The primary purpose of the symbols is to explain the functions and uses of the indicators and controls which are an integral part of a balancing machine.</p>

9200,IS,,ISO 3720:1981,Black tea — Specification,Thé noir — Spécifications,1981-11-01,2,['67.140.10'],ISO/TC 34/SC 8,9599,,[9201],"['en','fr']",4,

9201,IS,,ISO 3720:1986,Black tea — Definition and basic requirements,Thé noir — Définition et caractéristiques de base,1986-09-04,3,['67.140.10'],ISO/TC 34/SC 8,9599,[9200],[51541],"['en','fr']",2,<p>Specification of the parts of the plant that are suitable for making black tea for consumption as a beverage and the chemical requirements that are used to indicate a good product. Further specification of the packing and marking requirements.</p>

20102,IS,Cor,ISO 3720:1986/Cor 1:1992,Black tea — Definition and basic requirements — Technical Corrigendum 1,Thé noir — Définition et caractéristiques de base — Rectificatif technique 1,1992-02-20,3,['67.140.10'],ISO/TC 34/SC 8,9599,,[51541],"['en','fr']",1,"<p>Replaces ISO 1574 by ISO 9768:1990 on pages 1 and 2 (in the table, column 3).</p>"

40058,IS,Cor,ISO 3720:1986/Cor 2:2004,Black tea — Definition and basic requirements — Technical Corrigendum 2,Thé noir — Définition et caractéristiques de base — Rectificatif technique 2,2004-03-05,3,['67.140.10'],ISO/TC 34/SC 8,9599,,[51541],"['en','fr']",1,

9203,IS,,ISO 3723:1976,Hydraulic fluid power — Filter elements — Method for end load test,Transmissions hydrauliques — Éléments filtrants — Méthode de détermination de la résistance à la déformation axiale,1976-09-01,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[66753],"['en','fr']",1,"<p>Specifies a method for verifying the end load rating for a filter element, and verifies also the ability of an element to withstand the designated axial load imposed by installation and use. Gives definitions, test procedure, and criteria for acceptance.</p>"

9204,IS,,ISO 3724:1976,Hydraulic fluid power — Filter elements — Verification of flow fatigue characteristics,Transmissions hydrauliques — Éléments filtrants — Vérification des caractéristiques d'un filtre par un essai de fatigue due au débit,1976-09-01,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[45517],"['en','fr']",2,"<p>Specifies a method for determining the characteristics of a filter element and establishes a uniform method for verifying the ability of an element to withstand the flexing caused by cyclic differential pressures without altering its collapse/burst rating. Gives definitions, test procedures, and criteria for acceptance. A figure shows the typical test stand.</p>"

9207,IS,,ISO 3727:1977,"Butter — Determination of water, solids-not-fat and fat contents on the same test portion (Reference method)","Beurre — Détermination des teneurs en eau, en matière sèche non grasse et en matière grasse sur la même prise d'essai (Méthode de référence)",1977-11-01,1,['67.100.20'],ISO/TC 34/SC 5,9599,,"[35212,29474,29475,9208]","['en','fr']",3,"<p>Depending on the content to be estimated the method described uses three different steps for determination, i.e. drying of a known mass of butter at 102 +/- 2 degrees centigrade and weighing to determination the loss of mass, extraction of the fat from the dried butter with light petroleum or n-hexane and weighing of the resid

9209,IS,,ISO 3728:1977,Ice cream and milk ice — Determination of total solids content (Reference method),Crème glacée et glace au lait — Détermination de la teneur en matière sèche totale (Méthode de référence),1977-01-01,1,['67.100.40'],ISO/TC 34/SC 5,9599,,[40471],"['en','fr']",3,"<p>Specifies a method, the principle of which consists in drying, at 102 degrees centigrade, a known quality of the sample, diluted with water and mixed with sand, to constant mass, then followed by weighing to determine the mass of the residue. Special notes on sampling are given in the annex which, however, is valid only until the publication of ISO 707.</p>"

9211,IS,,ISO 3730:1976,Shipbuilding — Mooring winches,Construction navale — Treuils d'amarrage,1976-06-01,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[9212],"['en','fr']",5,

9212,IS,,ISO 3730:1988,Shipbuilding — Mooring winches,Construction navale — Treuils d'amarrage,1988-12-13,2,['47.020.50'],ISO/TC 8/SC 4,9599,[9211],[54581],"['en','fr']",6,"<p>Specifies the characteristics of automatic and non-automatic mooring winches with electric, hydraulic or steam drive,which fulfil the functions of manoeuvring, holding and storing mooring ropes on a single drum.</p>"

9214,IS,,ISO 3731:1980,Road vehicles — Electrical connections between towing vehicles and trailers with 24 V electrical equipment — Type 24 S (supplementary),Véhicules routiers — Liaisons électriques entre véhicules tracteurs et véhicules remorqués avec équipement électrique 24 V — Type 24 S (supplémentaire),1980-07-01,2,['43.040.10'],ISO/TC 22,9599,,[9215],"['en','fr']",4,

9215,IS,,ISO 3731:1997,Road vehicles — Electrical connections between towing and towed vehicles with 24 V systems — 7 pole connector type 24 S (supplementary),Véhicules routiers — Connexions électriques entre véhicule tracteur et véhicule tracté équipés d'un circuit électrique de 24 V — Connecteur à 7 contacts de type 24 S (supplémentaire),1997-10-30,3,['43.040.10'],ISO/TC 22,9599,[9214],[30211],"['en','fr']",8,

9216,IS,,ISO 3732:1982,Road vehicles — Electrical connections between towing vehicles and trailers with 6 or 12 V electrical equipment — Type 12 S (supplementary),Véhicules routiers — Liaisons électriques entre véhicules tracteurs et véhicules remorqués avec équipement électrique 6 ou 12 V — Type 12 S (supplémentaire),1982-11-01,2,['43.040.10'],ISO/TC 22,9599,,[9217],"['en','fr']",4,

9217,IS,,ISO 3732:1997,Road vehicules — Electrical connections between towing and towed vehicles with 12 V systems — 7 pole connector type 12 S (supplementary),Véhicules routiers — Connexions électriques entre véhicule tracteur et véhicule tracté équipés d'un circuit électrique de 12 V — Connecteur à 7 contacts de type 12 S (supplémentaire),1997-10-30,3,['43.040.10'],ISO/TC 22,9599,[9216],[30210],"['en','fr']",8,

9218,IS,,ISO 3733:1976,Petroleum products and bituminous materials — Determination of water — Distillation method,Produits pétroliers et produits bitumineux — Détermination de la teneur en eau — Méthode par distillation,1976-02-01,1,['75.080'],ISO/TC 28/SC 2,9599,,[9219],"['en','fr']",5,

9220,IS,,ISO 3734:1976,Crude petroleum and fuel oils — Determination of water and sediment — Centrifuge method,Pétrole brut et fuel-oils — Détermination de la teneur en eau et en sédiments — Méthode par centrifugation,1976-08-01,1,"['75.160.20','75.040']",ISO/TC 28/SC 2,9599,,[9221],"['en','fr']",4,

9222,IS,,ISO 3735:1975,Crude petroleum and fuel oils — Determination of sediment — Extraction method,Pétrole brut et fuel-oils — Détermination de la teneur en sédiments — Méthode par extraction,1975-12-01,1,"['75.160.20','75.040']",ISO/TC 28/SC 2,9599,,[25980],"['en','fr']",3,

9223,IS,,ISO 3737:1976,Agricultural tractors and self-propelled machines — Test method for enclosure pressurization systems,Tracteurs agricoles et machines automotrices — Méthode d'essai des systèmes de pressurisation d'enceinte,1976-04-01,1,['65.060.01'],ISO/TC 23/SC 2,9599,,"[26556,26553,24038,26554,26555]","['en','fr']",1,

9224,IS,,ISO 3738:1976,Hardmetals — Rockwell hardness test (Scale A),Métaux-durs — Essai de dureté Rockwell (échelle A),1976-07-01,1,"['77.160','77.040.10']",ISO/TC 119/SC 4,9599,,[9225],"['en','fr']",4,

9227,IS,,ISO 3739-1:1992,"Industrial tyres and rims — Part 1: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Designation, dimensions and marking","Pneumatiques et jantes pour matériel de manutention — Partie 1: Pneumatiques (série millimétrique) montés sur jantes coniques à 5 degrés ou à base plate — Désignation, cotes et marquage",1992-05-07,1,['83.160.99'],ISO/TC 31/SC 7,9599,,[39042],"['en','fr']",6,"<p>Applies to tyres primarily intended for industrial vehicles for use on prepared surfaces. The tyres are based on the following parameters: speeds not exceeding 50 km/h, rim diameters not exceeding rim diameter code of 15.</p>"

39042,IS,,ISO 3739-1:2007,"Industrial tyres and rims — Part 1: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Designation, dimensions and marking","Pneumatiques et jantes industriels pour matériel de manutention — Partie 1: Pneumatiques (série millimétrique) montés sur jantes coniques à 5 degrés ou à base plate — Désignation, cotes et marquage",2007-06-21,2,['83.160.99'],ISO/TC 31/SC 7,9599,[9227],"[82918,73652]","['en','fr']",12,"<p>ISO 3739-1:2007 specifies the main requirements of the metric series of pneumatic tyres primarily intended for industrial vehicles, including designations, dimensions and markings. The tyres are based on the following parameters:</p><ul

9229,IS,,ISO 3739-2:1992,Industrial tyres and rims — Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings,Pneumatiques et jantes pour matériel de manutention — Partie 2: Pneumatiques (série millimétrique) montés sur jantes coniques à 5 degrés ou à base plate — Capacités de charge,1992-05-07,1,['83.160.99'],ISO/TC 31/SC 7,9599,,"[9228,78099]","['en','fr']",2,"<p>Applies to tyres primarily intended for industrial vehicles for use on prepared surfaces (counterbalanced lift trucks, side loaders, and other vehicles). Defines a reference load-carrying capacity which the load rating is based on.</p>"

9230,IS,,ISO 3739-3:1995,Industrial tyres and rims — Part 3: Rims,Pneumatiques et jantes pour matériel de manutention — Partie 3: Jantes,1995-11-30,1,['53.060'],ISO/TC 31/SC 7,9599,,[39043],"['en','fr']",7,"<p>Gives the main requirements, including size designation and marking of flat base rims for pneumatic tyres and for solid tyres for pneumatic tyre rims.</p>"

39043,IS,,ISO 3739-3:2008,Industrial tyres and rims — Part 3: Rims,Pneumatiques et jantes industriels pour matériel de manutention — Partie 3: Jantes,2008-01-22,2,['53.060'],ISO/TC 31/SC 7,9599,[9230],[77787],"['en','fr']",8,"<p>ISO 3739-3:2008 specifies the main requirements, including size designation and marking, of 5° tapered and flat base rims, with diameters not exceeding rim diameter code 15 for pneumatic tyres and for solid tyres for pneumatic tyre rims, primarily intended for industrial vehicles for use on prepared surfaces.</p><p>ISO 3739-1 gives the designation, dimensions and marking, and ISO 3739-2 gives the load ratings, of pneumatic tyres (metric series). ISO 10499-1 covers th

66421,IS,,ISO 374-1:2016,Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks,Gants de protection contre les produits chimiques dangereux et les micro-organismes — Partie 1: Terminologie et exigences de performance pour les risques chimiques,2016-10-14,1,"['13.340.40','01.040.13']",ISO/TC 94/SC 13,9599,,[83210],"['en','fr']",7,"<p>ISO 374-1:2016 specifies the requirements for protective gloves intended to protect the user against dangerous chemicals and defines terms to be used.</p><p>NOTE If other protection features have to be covered, e.g. mechanical risks, thermal risks, electrostatic dissipation

74017,IS,Amd,ISO 374-1:2016/Amd 1:2018,Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks — Amendment 1,Gants de protection contre les produits chimiques dangereux et les micro-organismes — Partie 1: Terminologie et exigences de performance pour les risques chimiques — Amendement 1,2018-06-21,1,"['13.340.40','01.040.13']",ISO/TC 94/SC 13,9599,,[83210],"['en','fr']",1,

66562,IS,,ISO 374-5:2016,Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks,Gants de protection contre les produits chimiques dangereux et les micro-organismes — Partie 5: Terminologie et exigences de performance pour les risques contre les micro-organismes,2016-10-12,1,"['13.340.40','01.040.13']",ISO/TC 94/SC 13,9599,,[83211],"['en','fr']",4,"<p>ISO 374-5:2016 specifies the requirements and test methods for protective gloves intended to protect the user against micro-organisms.</p><p>NOTE If other protection features is to be needed, e.g. chemical risks, mechanical risks, thermal risks, elec

9231,IS,,ISO 3740:1980,Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards and for the preparation of noise test codes,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Guide pour l'utilisation des normes fondamentales et pour la préparation des codes d'essais relatifs au bruit,1980-04-01,1,['17.140.01'],ISO/TC 43/SC 1,9599,[4546],[1260],"['en','fr']",14,

1260,IS,,ISO 3740:2000,Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Guide pour l'utilisation des normes de base,2000-11-02,2,['17.140.01'],ISO/TC 43/SC 1,9599,[9231],[45107],"['en','fr']",25,

9232,IS,,ISO 3741:1975,Acoustics — Determination of sound power levels of noise sources — Precision methods for broad-band sources in reverberation rooms,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthodes de laboratoire en salles réverbérantes pour les sources à large bande,1975-07-01,1,['17.140.01'],ISO/TC 43,9599,,[9233],"['en','fr']",13,

9233,IS,,ISO 3741:1988,Acoustics — Determination of sound power levels of noise sources — Precision methods for broad-band sources in reverberation rooms,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthodes de laboratoire en salles réverbérantes pour les sources à large bande,1988-12-15,2,['17.140.01'],ISO/TC 43/SC 1,9599,"[4546,9232]",[22818],"['en','fr']",16,

22818,IS,,ISO 3741:1999,Acoustics — Determination of sound power levels of noise sources using sound pressure — Precision methods for reverberation rooms,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique — Méthodes de laboratoire en salles réverbérantes,1999-07-29,3,['17.140.01'],ISO/TC 43/SC 1,9599,"[9235,9233]",[52053],"['en','fr']",32,

35108,IS,Cor,ISO 3741:1999/Cor 1:2001,Acoustics — Determination of sound power levels of noise sources using sound pressure — Precision methods for reverberation rooms — Technical Corrigendum 1,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique — Méthodes de laboratoire en salles réverbérantes — Rectificatif technique 1,2001-02-22,3,['17.140.01'],ISO/TC 43/SC 1,9599,,[52053],"['en','fr']",1,

9234,IS,,ISO 3742:1975,Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthodes de laboratoire en salles réverbérantes pour les sources émettant des fréquences discrètes et des bruits à bandes étroites,1975-07-01,1,['17.140.01'],ISO/TC 43,9599,,[9235],"['en','fr']",9,

9235,IS,,ISO 3742:1988,Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthodes de laboratoire en salles réverbérantes pour les sources émettant des bruits à composantes tonales et à bande étroite,1988-12-15,2,['17.140.01'],ISO/TC 43/SC 1,9599,"[4546,9234]",[22818],"['en','fr']",8,

9238,IS,,ISO 3743-1:1994,"Acoustics — Determination of sound power levels of noise sources — Engineering methods for small, movable sources in reverberant fields — Part 1: Comparison method for hard-walled test rooms",Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthodes d'expertise en champ réverbéré applicables aux petites sources transportables — Partie 1: Méthode par comparaison en salle d'essai à parois dures,1994-02-17,1,['17.140.01'],ISO/TC 43/SC 1,9599,,[52054],"['en','fr']",10,"<p>Specifies a relatively simple engineering method for determining the sound power levels of small, movable noise sources (all types of noise within a specif

9236,IS,,ISO 3743:1976,Acoustics — Determination of sound power levels of noise sources — Engineering methods for special reverberation test rooms,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthodes d'expertise pour les salles d'essai réverbérantes spéciales,1976-12-01,1,['17.140.01'],ISO/TC 43,9599,,[9237],"['en','fr']",16,

9237,IS,,ISO 3743:1988,Acoustics — Determination of sound power levels of noise sources — Engineering methods for special reverberation test rooms,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthodes d'expertise en salles réverbérantes spéciales,1988-12-15,1,['17.140.01'],ISO/TC 43/SC 1,9599,"[4546,9236]",[21753],"['en','fr']",19,

21753,IS,,ISO 3743-2:1994,"Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms",Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique — Méthodes d'expertise en champ réverbéré applicables aux petites sources transportables — Partie 2: Méthodes en salle d'essai réverbérante spéciale,1994-11-03,1,['17.140.01'],ISO/TC 43/SC 1,9599,[9237],[69600],"['en','fr']",20,"<p>Cancels and replaces ISO 3743 (1988). Specifies a relatively simple engineering method for determini

9239,IS,,ISO 3744:1981,Acoustics — Determination of sound power levels of noise sources — Engineering methods for free-field conditions over a reflecting plane,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthodes d'expertise pour les conditions de champ libre au-dessus d'un plan réfléchissant,1981-05-01,1,['17.140.01'],ISO/TC 43,9599,[4546],[9240],"['en','fr']",25,

9240,IS,,ISO 3744:1994,Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting plane,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique — Méthode d'expertise dans des conditions approchant celles du champ libre sur plan réfléchissant,1994-05-05,2,['17.140.01'],ISO/TC 43/SC 1,9599,[9239],[52055],"['en','fr']",31,"<p>Specifies a method of measurement. Gives requirements for the test environment and instrumentation, as well as techniques for obtaining the surface sound pressure level from which the sound power level of the

52055,IS,,ISO 3744:2010,Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane,Acoustique — Détermination des niveaux de puissance acoustique et des niveaux d'énergie acoustique émis par les sources de bruit à partir de la pression acoustique — Méthodes d'expertise pour des conditions approchant celles du champ libre sur plan réfléchissant,2010-09-22,3,['17.140.01'],ISO/TC 43/SC 1,9599,"[9240,10856]",[80866],"['en','fr']",78,"<p>ISO 3744:2010 specifies methods for determining the sound power level or sound energy level of a noise source from sound pressure levels

9241,IS,,ISO 3745:1977,Acoustics — Determination of sound power levels of noise sources — Precision methods for anechoic and semi-anechoic rooms,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthodes de laboratoire pour les salles anéchoïque et semi-anéchoïque,1977-05-01,1,['17.140.01'],ISO/TC 43/SC 1,9599,[4546],[21750],"['en','fr']",21,"<p>Specifies two laboratory methods. Gives requirements for the test room as well as the source location, operating conditions and instrumentation. Specifies techniques for obtaining an estimate of the surface sound pressure level from which the weighted sound power level of the source and the sound power lev

21750,IS,,ISO 3745:2003,Acoustics — Determination of sound power levels of noise sources using sound pressure — Precision methods for anechoic and hemi-anechoic rooms,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique — Méthodes de laboratoire pour les salles anéchoïques et semi-anéchoïques,2003-11-25,2,['17.140.01'],ISO/TC 43/SC 1,9599,[9241],"[38425,45362]","['en','fr']",43,"<p>ISO 3745:2003 specifies methods for measuring the sound pressure levels on a measurement surface enveloping a noise source in anechoic and hemi-anechoic rooms, in order to determine the sound power level or sound energy level produced by th

9242,IS,,ISO 3746:1979,Acoustics — Determination of sound power levels of noise sources — Survey method,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthode de contrôle,1979-04-01,1,['17.140.01'],ISO/TC 43,9599,[4546],[21154],"['en','fr']",13,

21154,IS,,ISO 3746:1995,Acoustics — Determination of sound power levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique — Méthode de contrôle employant une surface de mesure enveloppante au-dessus d'un plan réfléchissant,1995-08-10,2,['17.140.01'],ISO/TC 43/SC 1,9599,[9242],[52056],"['en','fr']",27,"<p>Specifies a method for measuring the sound pressure levels on a measurement surface enveloping the noice source. Gives requirements for the test environment and instrumentation as well as techniques

26657,IS,Cor,ISO 3746:1995/Cor 1:1995,Acoustics — Determination of sound power levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane — Technical Corrigendum 1,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique — Méthode de contrôle employant une surface de mesure enveloppante au-dessus d'un plan réfléchissant — Rectificatif technique 1,1995-11-30,2,['17.140.01'],ISO/TC 43/SC 1,9599,,[52056],"['en','fr']",1,<p>Corrigendum relates to the frequency range in clause 3.7.</p>

9243,IS,,ISO 3747:1987,Acoustics — Determination of sound power levels of noise sources — Survey method using a reference sound source,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit — Méthode de contrôle faisant appel à une source sonore de référence,1987-05-21,1,['17.140.01'],ISO/TC 43/SC 1,9599,,[21749],"['en','fr']",16,

21749,IS,,ISO 3747:2000,Acoustics — Determination of sound power levels of noise sources using sound pressure — Comparison method in situ,Acoustique — Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique — Méthode de comparaison pour une utilisation in situ,2000-06-29,2,['17.140.01'],ISO/TC 43/SC 1,9599,[9243],[46426],"['en','fr']",19,

4351,IS,,ISO 375:1974,Steel — Tensile testing of tubes,Acier — Essai de traction des tubes,1974-08-01,1,"['23.040.10','77.040.10']",ISO/TC 164/SC 1,9599,,[13414],"['en','fr']",13,

9245,IS,,ISO 3750:1976,Zinc alloys — Determination of magnesium content — Atomic absorption method,Alliages de zinc — Dosage du magnésium — Méthode par absorption atomique,1976-09-01,1,['77.120.60'],ISO/TC 18,9599,,[35950],"['en','fr']",2,"<p>This method is applicable to the zinc alloys defined in ISO 301. It is suitable for the determination of magnesium contents between 0,01 and 0,08 %. ISO 3750 specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.</p>"

9246,IS,,ISO 3751:1976,Zinc ingots — Selection and preparation of samples for chemical analysis,Zinc en lingots — Prélèvement et préparation des échantillons pour l'analyse chimique,1976-09-01,1,['77.120.60'],ISO/TC 18,9599,,[35285],"['en','fr']",2,"<p>Covers only the selection and preparation of samples from zinc ingots. Alternatively, the interested parties may agree to select samples of zinc in the liquid state during production.</p>"

9247,IS,,ISO 3752:1976,Zinc alloy ingots — Selection and preparation of samples for chemical analysis,Alliages de zinc en lingots — Prélèvement et préparation des échantillons pour l'analyse chimique,1976-09-01,1,['77.120.60'],ISO/TC 18,9599,,[35285],"['en','fr']",2,"<p>Covers only the selection and preparation of samples from zinc alloy ingots. Alternatively, the interested parties may agree to select samples of zinc alloy in the liquid state during production.</p>"

9250,IS,,ISO 3754:1976,Steel — Determination of effective depth of hardening after flame or induction hardening,Acier — Détermination de la profondeur conventionnelle de trempe après chauffage superficiel,1976-06-01,1,['77.040.99'],ISO/TC 17/SC 7,9599,,[61748],"['en','fr']",2,"<p>Defines the effective depth of hardening and specifies a measuring method. Applies to hardened layers with a depth greater than 0,3 mm, and parts which have at a distance 3 x depth of hardening from the surface a hardness less than hardness limit - 100.</p>"

9251,IS,,ISO 3755:1976,Cast steels for general engineering purposes,Aciers moulés pour construction mécanique d'usage général,1976-07-01,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[9252],"['en','fr']",3,

9252,IS,,ISO 3755:1991,Cast carbon steels for general engineering purposes,Aciers au carbone moulés pour construction mécanique d'usage général,1991-10-17,2,['77.140.80'],ISO/TC 17/SC 11,9599,[9251],"[59160,59277]","['en','fr']",3,<p>Specifies requirements for eight grades (intended to be used at ambient temperature) of heat-treated steels. This second edition cancels and replaces the first edition (1976).</p>

9254,IS,,ISO 3757:1978,Oil of patchouli,Huile essentielle de patchouli,1978-08-01,1,['71.100.60'],ISO/TC 54,9599,,"[9255,32035]","['en','fr']",2,"<p>The Standard specifies the following characteristics of the oil. Appearance: Liquid, more or less viscous. Colour: Reddish-brown to greenish-brown. Odour: Characteristic, leafy, slightly camphoraceous. Relative density at 20/20 °C: 0,955 - 0,983. Refractive index at 20 °C: 1,5050 - 1,5120. Optical rotation at 20 °C: Range from - 66 to - 40 (exceptionally, to - 32 ). Miscibility with 90 % (V/V) ethanol at 20 °C: 1 : 10. Acid value: Maximum 4,0. Ester value: Maximum 10.</p>"

9256,IS,,ISO 3758:1991,Textiles — Care labelling code using symbols,Textiles — Code d'étiquetage d'entretien au moyen de symboles,1991-07-25,1,['59.080.01'],ISO/TC 38,9599,,[21196],"['en','fr']",6,

25249,IS,Suppl,ISO 3758:1991/Suppl:1993,Textiles — Care labelling code using symbols — Supplement,Textiles — Code d'étiquetage d'entretien au moyen de symboles — Supplément,1993-05-07,1,"['59.080.01','01.080.20']",ISO/TC 38,9599,,[21196],"['en','fr']",1,

21196,IS,,ISO 3758:2005,Textiles — Care labelling code using symbols,Textiles — Code d'étiquetage d'entretien au moyen de symboles,2005-04-01,2,['59.080.01'],ISO/TC 38,9599,"[9256,25249]",[42918],"['en','fr']",23,"<p>ISO 3758:2005</p><ul><li>establishes a system of graphic symbols, intended for use in the marking of textile articles, providing information to prevent irreversible damage to the article during the textile care process;</li><li>specifies the use of these symbols in care labelling.</li></ul><p>The following domestic treatments are covered: washing, bleaching, drying, ironing, and drying after washing. Professional textile care treatments in dry and wet cleaning, but excluding ind

42918,IS,,ISO 3758:2012,Textiles — Care labelling code using symbols,Textiles — Code d'étiquetage d'entretien au moyen de symboles,2012-03-29,3,['59.080.01'],ISO/TC 38/SC 2,9599,[21196],[74401],"['en','fr']",22,"<p>ISO 3758:2012 establishes a system of graphic symbols, intended for use in the marking of textile articles, and for providing information on the most severe treatment that does not cause irreversible damage to the article during the textile care process, and specifies the use of these symbols in care labelling.</p><p>The following domestic treatments are covered: washing, bleaching, drying and ironing. Professional textile care treatments in dry and wet cleaning, but excluding ind

9257,IS,,ISO 3759:1976,"Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change","Textiles — Préparation, marquage et mesurage des éprouvettes d'étoffe et des vêtements dans les essais de détermination de la variation des dimensions",1976-08-01,1,['59.080.30'],ISO/TC 38,9599,,"[9258,9259]",['en'],6,

9258,IS,,ISO 3759:1984,"Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change","Textiles — Préparation, marquage et mesurage des éprouvettes d'étoffe et des vêtements dans les essais de détermination de la variation des dimensions",1984-09-01,2,"['59.080.30','61.020']",ISO/TC 38/SC 2,9599,[9257],[9259],"['en','fr']",6,

9259,IS,,ISO 3759:1994,"Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change","Textiles — Préparation, marquage et mesurage des éprouvettes d'étoffe et des vêtements dans les essais de détermination de la variation des dimensions",1994-12-15,3,"['59.080.30','61.020']",ISO/TC 38/SC 2,9599,"[9257,9258]",[41876],"['en','fr']",4,"<p>The method specified is based on selecting specimens to represent the bulk of the textile under examination, marking pairs of reference points on each specimen, and measuring the distance between each pair of reference points before and after specified treatment, e.g. washing, dry cleaning, so

31674,IS,Cor,ISO 3759:1994/Cor 1:1999,"Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change — Technical Corrigendum 1","Textiles — Préparation, marquage et mesurage des éprouvettes d'étoffe et des vêtements dans les essais de détermination de la variation des dimensions — Rectificatif technique 1",1999-04-29,3,"['59.080.30','61.020']",ISO/TC 38/SC 2,9599,,[41876],"['en','fr']",1,

41134,IS,Cor,ISO 3759:1994/Cor 2:2004,"Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change — Technical Corrigendum 2","Textiles — Préparation, marquage et mesurage des éprouvettes d'étoffe et des vêtements dans les essais de détermination de la variation des dimensions — Rectificatif technique 2",2004-11-08,3,"['59.080.30','61.020']",ISO/TC 38/SC 2,9599,,[41876],"['en','fr']",2,

41876,IS,,ISO 3759:2007,"Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change","Textiles — Préparation, marquage et mesurage des éprouvettes d'étoffe et des vêtements dans les essais de détermination de la variation des dimensions",2007-03-19,4,"['59.080.30','61.020']",ISO/TC 38/SC 2,9599,"[31674,9259,41134]",[57309],"['en','fr']",5,"<p>ISO 3759:2007 specifies a method for the preparation, marking and measuring of textile fabrics, garments and fabric assemblies for use in tests for assessing dimensional change after a specified treatment, e.g. washing, dry cleaning, soaking in water and steaming, following the procedu

4353,IS,,ISO 376:1987,Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines,Matériaux métalliques — Étalonnage des instruments de mesure de force utilisés pour la vérification des machines d'essais uniaxiaux,1987-06-18,1,['77.040.10'],ISO/TC 164/SC 1,9599,[4352],[21620],"['en','fr']",7,

21620,IS,,ISO 376:1999,Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines,Matériaux métalliques — Étalonnage des instruments de mesure de force utilisés pour la vérification des machines d'essais uniaxiaux,1999-08-26,2,['77.040.10'],ISO/TC 164/SC 1,9599,[4353],[36339],"['en','fr']",20,

36339,IS,,ISO 376:2004,Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines,Matériaux métalliques — Étalonnage des instruments de mesure de force utilisés pour la vérification des machines d'essais uniaxiaux,2004-11-03,3,['77.040.10'],ISO/TC 164/SC 1,9599,[21620],[44661],"['en','fr']",20,<p>ISO 376:2004 covers the calibration of force-proving instruments used for the static verification of uniaxial testing machines (e.g. tension/compression testing machines) and describes a procedure for classifying these instruments.</p><p>ISO 376:2004 generally applies to force-proving instruments in which the force is determined by measuring

9260,IS,,ISO 3760:1979,Oil of celery seed,Huile essentielle de graines de céleri,1979-02-01,1,['71.100.60'],ISO/TC 54,9599,,"[32029,9261]","['en','fr']",2,"<p>The Standard specifies the characteristics of the oil. Appearance: Clear, very mobile liquid. Colour: Almost colourless to brownish-yellow. Odour: Characteristic, pervasive, spicy, very clinging. Relative density at 20/20 °C: 0,875 - 0,908. Refractive index at 20 °C: 1,4780 - 1,4900. Optical rotation at 20 °C: Range from + 48 to + 78 . Miscibility with 90 % (V/V) ethanol at 20 °C: 1 : 10. Saponification value: 30- 70.</p>"

9262,IS,,ISO 3761:1976,"Oil of rosewood, Brazil",Huile essentielle de bois de rose du Brésil,1976-08-01,1,['71.100.60'],ISO/TC 54,9599,,[9263],"['en','fr']",2,

9263,IS,,ISO 3761:1997,"Oil of rosewood, Brazilian type (Aniba rosaeodora Ducke var. amazonica Ducke or Aniba parviflora (Meissner) Mez)","Huile essentielle de bois de rose, type Brésil (Aniba rosaeodora Ducke var. amazonica Ducke ou Aniba parviflora (Meissner) Mez)",1997-05-01,2,['71.100.60'],ISO/TC 54,9599,[9262],[34823],"['en','fr']",5,

9266,IS,,ISO 3764:1976,Timekeeping instruments — Casing diameters for round movements,Instruments horaires — Diamètres d'encageage des mouvements ronds,1976-06-01,1,['39.040.01'],ISO/TC 114,9599,,[9267],"['en','fr']",1,

9267,IS,,ISO 3764:1997,"Timekeeping instruments — Movements — Forms, dimensions and nomenclature","Instruments horaires — Mouvements — Formes, dimensions et nomenclature",1997-11-06,2,['39.040.10'],ISO/TC 114/SC 7,9599,[9266],[32897],"['en','fr']",6,

32897,IS,,ISO 3764:2000,"Timekeeping instruments — Movements — Types, dimensions and nomenclature","Instruments horaires — Mouvements — Formes, dimensions et nomenclature",2000-05-04,3,['39.040.10'],ISO/TC 114/SC 7,9599,[9267],[59931],"['en','fr']",7,

9268,IS,,ISO 3765:1976,Timekeeping instruments — Wristwatch cases — Dimensions of fastening elements for bracelets,Instruments horaires — Boîtes de montres- bracelets — Dimensions de raccordement pour les bracelets,1976-06-01,1,['39.040.10'],ISO/TC 114,9599,,[9269],"['en','fr']",1,

9270,IS,,ISO 3766:1977,Building and civil engineering drawings — Symbols for concrete reinforcement,Dessins de bâtiment et de génie civil — Représentation symbolique des armatures de béton,1977-02-01,1,['01.100.30'],ISO/TC 10,9599,,[19976],"['en','fr']",5,

19976,IS,,ISO 3766:1995,Construction drawings — Simplified representation of concrete reinforcement,Dessins de construction — Représentation simplifiée des armatures de béton,1995-02-09,2,['01.100.30'],ISO/TC 10/SC 8,9599,[9270],[34171],"['en','fr']",7,

9272,IS,,ISO 3767-1:1982,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 1: Symboles communs",1982-10-01,1,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,[9271],[9273],['en'],5,

9273,IS,,ISO 3767-1:1991,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 1: Symboles communs",1991-11-21,2,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,[9272],[22633],"['en','fr']",30,

22633,IS,,ISO 3767-1:1998,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 1: Symboles communs",1998-12-20,3,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,[9273],[60090],"['en','fr']",32,

44053,IS,Amd,ISO 3767-1:1998/Amd 1:2008,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols — Amendment 1: Additional symbols","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 1: Symboles communs — Amendement 1: Symboles additionnels",2008-11-05,3,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,,[60090],"['en','fr']",4,

54855,IS,Amd,ISO 3767-1:1998/Amd 2:2012,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols — Amendment 2: Additional symbols concerning the engine emissions system and diesel exhaust fluid","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 1: Symboles communs — Amendement 2: Symboles supplémentaires concernant le système d'échappement du moteur et le fluide d'échappement diesel",2012-04-16,3,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,,[60090],"['en','fr']",3, 5485

9271,IS,,ISO 3767:1979,Withdrawal of ISO 3767-1979,Annulation de l'ISO 3767-1979,1979-04-01,1,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,,"[9272,9276]",['en'],4,

9276,IS,,ISO 3767-2:1982,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 2: Symboles pour tracteurs et machines agricoles",1982-09-01,1,"['65.060.10','01.080.20']",ISO/TC 23/SC 14,9599,[9271],[9277],"['en','fr']",3,

9277,IS,,ISO 3767-2:1991,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 2: Symboles pour tracteurs et machines agricoles",1991-11-28,2,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,[9276],[51188],"['en','fr']",16,<p>Gives 65 symbols which are presented with 32 % of original size and defines the various colours to be used. This second edition cancels and replaces the first edition

9280,IS,Amd,ISO 3767-2:1991/Amd 1:1995,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery — Amendment 1","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 2: Symboles pour tracteurs et machines agricoles — Amendement 1",1995-02-23,2,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,,[51188],"['en','fr']",8,"<p>Adds and replaces, on pages 3, 5, 6, 7, 13 and 15 symbols.</p>"

22634,IS,Amd,ISO 3767-2:1991/Amd 2:1998,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery — Amendment 2: Additional symbols","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 2: Symboles pour tracteurs et machines agricoles — Amendement 2: Symboles supplémentaires",1998-12-20,2,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,,[51188],"['en','fr']",9,

27415,IS,Amd,ISO 3767-2:1991/Amd 3:2000,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery — Amendment 3","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 2: Symboles pour tracteurs et machines agricoles — Amendement 3",2000-03-23,2,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,,[51188],"['en','fr']",1,

51188,IS,,ISO 3767-2:2008,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 2: Symboles pour tracteurs et machines agricoles",2008-09-08,3,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,"[27415,9280,9277,22634,44054]",[60092],"['en','fr']",23,"<p>ISO 3767-2:2008 establishes symbols for use on operator controls and other displays on tractors and machinery for agriculture as defined in

9282,IS,,ISO 3767-3:1988,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 3: Symbols for powered lawn and garden equipment","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 3: Symboles pour matériel à moteur pour jardins et pelouses",1988-03-31,1,"['01.080.20','65.060.70']",ISO/TC 23/SC 14,9599,,[9283],"['en','fr']",2,

9283,IS,,ISO 3767-3:1995,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 3: Symbols for powered lawn and garden equipment","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 3: Symboles pour matériel à moteur pour jardins et pelouses",1995-02-23,2,"['01.080.20','65.060.70']",ISO/TC 23/SC 14,9599,[9282],[60094],"['en','fr']",7,<p>Cancels and replaces the first edition (1988). Establishes symbols for use on operator controls and other displays on powered lawn and garden equipment.</p> 92

9284,IS,,ISO 3767-4:1993,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 4: Symbols for forestry machinery","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 4: Symboles pour le matériel forestier",1993-12-23,1,"['65.060.80','01.080.20']",ISO/TC 23/SC 14,9599,,[60095],"['en','fr']",28,"<p>Establishes 113 graphical symbols uniquely for use on operator controls and other displays on specialized forestry machinery as defined in ISO 6814, such as log loaders. Also included are symbols for

9285,IS,Amd,ISO 3767-4:1993/Amd 1:2000,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 4: Symbols for forestry machinery — Amendment 1: Additional symbols","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 4: Symboles pour le matériel forestier — Amendement 1: Symboles supplémentaires",2000-09-28,1,"['65.060.80','01.080.20']",ISO/TC 23/SC 14,9599,,[60095],"['en','fr']",3,

44055,IS,Amd,ISO 3767-4:1993/Amd 2:2008,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 4: Symbols for forestry machinery — Amendment 2: Additional symbols","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 4: Symboles pour le matériel forestier — Amendement 2: Symboles supplémentaires",2008-08-20,1,"['65.060.80','01.080.20']",ISO/TC 23/SC 14,9599,,[60095],"['en','fr']",1,

9286,IS,,ISO 3767-5:1992,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 5: Symbols for manual portable forestry machinery","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 5: Symboles pour le matériel forestier portatif à main",1992-07-09,1,"['65.060.80','01.080.20']",ISO/TC 23/SC 14,9599,,[60096],"['en','fr']",4,"<p>Defines and describes 8 symbols for fuel and oil mixture, chain oil fill/oil pump, heated handle, carburettor adjustments, manual start and emergency stop.</p>"

9287,IS,Amd,ISO 3767-5:1992/Amd 1:2001,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 5: Symbols for manual portable forestry machinery — Amendment 1: Revised and additional symbols","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Symboles pour les commandes de l'opérateur et autres indications — Partie 5: Symboles pour le matériel forestier portatif à main — Amendement 1: Symboles révisés et symboles complémentaires",2001-05-24,1,"['65.060.80','01.080.20']",ISO/TC 23/SC 14,9599,,[60096],"['en','fr']",2,

9288,IS,,ISO 3768:1976,Metallic coatings — Neutral salt spray test (NSS test),Revêtements métalliques — Essai au brouillard salin neutre (Essai NSS),1976-11-01,1,['25.220.40'],ISO/TC 107/SC 7,9599,,[16859],"['en','fr']",3,