Withdrawn and superseded ISO standards — page 106 of 246

8992,IS,,ISO 3584:1975,Road vehicles — Mounting of mechanical coupling devices on rear cross members of trucks,Véhicules routiers — Montage des dispositifs d'accouplement mécanique sur la traverse arrière des camions,1975-11-01,1,['43.040.70'],ISO/TC 22,9599,,"[30352,20559]","['en','fr']",2,"<p>Specifies the dimensional requirements for mounting coupling devices (hooks or forks). Applies to those vehicles that are currently used for international commercial transport, to be coupled to trailers the towed weight of which is greater than 3,5 tonnes. Defines the categories of weights 1, 2, and 3. Two figures illustrate shapes and reference quantities of concern.</p>"

30352,IS,,ISO 3584:2001,Road vehicles — Drawbar couplings — Interchangeability,Véhicules routiers — Dispositifs d'attelage — Interchangeabilité,2001-11-01,2,['43.040.70'],ISO/TC 22/SC 40,9599,[8992],[74383],"['en','fr']",10,

8993,IS,,ISO 3585:1976,"Glass plant, pipeline and fittings — Properties of borosilicate glass 3.3","Appareillage, tuyauterie et raccords en verre — Propriétés du verre borosilicaté 3.3",1976-04-01,1,['81.040.01'],ISO/TC 48,9599,,[8994],"['en','fr']",2,

8994,IS,,ISO 3585:1991,Borosilicate glass 3.3 — Properties,Verre borosilicaté 3.3 — Propriétés,1991-06-27,2,['81.040.01'],ISO/TC 48,9599,[8993],[24774],"['en','fr']",3,

9003,IS,,ISO 3592:1978,Numerical control of machines — NC processor output — Logical structure (and major words),Commande numérique des machines — Informations de sortie des processeurs CN — Structure logique (et mots majeurs),1978-12-01,1,['25.040.20'],ISO/TC 184/SC 1,9599,,"[2553,33798]","['en','fr']",30,

9005,IS,,ISO 3594:1976,Milk fat — Detection of vegetable fat by gas-liquid chromatography of sterols (Reference method),Matières grasses du lait — Détection des matières grasses végétales par chromatographie en phase gazeuse des stérols (Méthode de référence),1976-12-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[9006],"['en','fr']",5,"<p>The method consists in preparing of sterol digitonides and dissolving in a mixture of formamide and dimethylformamide, extraction of the liberated sterols with pentane, separation of the sterols using a suitable gas chromatograph. If, on the chromatogram, a peak with the retention time of beta-sitosterol is obtained, the presence of vegetable fat in the sample is

9007,IS,,ISO 3595:1976,Milk fat — Detection of vegetable fat by the phytosteryl acetate test,Matières grasses du lait — Détection des matières grasses végétales au moyen de l'essai à l'acétate de phytostérol,1976-12-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[9008],"['en','fr']",5,"<p>Specifies a method of detection unsing the principle of saponification of the fat and precipitation of the sterols as sterol digitonides by addition of an ethanolic digitonin solution, determination of the melting point of the steryl acetate after acetylisation of the steryl digitonides with acetic anhydride, and microscopical examination of the crystal form of the sterols after conversion of the steryl acetates i

9010,IS,,ISO 3596-1:1988,Animal and vegetable fats and oils — Determination of unsaponifiable matter — Part 1: Method using diethyl ether extraction (Reference method),Corps gras d'origines animale et végétale — Détermination de la teneur en matières insaponifiables — Partie 1: Méthode par extraction à l'oxyde diéthylique (méthode de référence),1988-06-30,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[33514],"['en','fr']",5,

27491,IS,Amd,ISO 3596-1:1988/Amd 1:1997,Animal and vegetable fats and oils — Determination of unsaponifiable matter — Part 1: Method using diethyl ether extraction (Reference method) — Amendment 1: Results of interlaboratory tests,Corps gras d'origines animale et végétale — Détermination de la teneur en matières insaponifiables — Partie 1: Méthode par extraction à l'oxyde diéthylique (méthode de référence) — Amendement 1: Résultats des essais interlaboratoires,1997-11-27,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[33514],"['en','fr']",2,

9011,IS,,ISO 3596-2:1988,Animal and vegetable fats and oils — Determination of unsaponifiable matter — Part 2: Rapid method using hexane extraction,Corps gras d'origines animale et végétale — Détermination de la teneur en matières insaponifiables — Partie 2: Méthode rapide par extraction à l'hexane,1988-06-09,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[33517],"['en','fr']",3,

29893,IS,Amd,ISO 3596-2:1988/Amd 1:1999,Animal and vegetable fats and oils — Determination of unsaponifiable matter — Part 2: Rapid method using hexane extraction — Amendment 1,Corps gras d'origines animale et végétale — Détermination de la teneur en matières insaponifiables — Partie 2: Méthode rapide par extraction à l'hexane — Amendement 1,1999-09-30,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[33517],"['en','fr']",3,

9013,IS,,ISO 3597-1:1993,Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods,Plastiques renforcés verre textile — Détermination des propriétés mécaniques sur joncs de stratifils — Partie 1: Notions générales et préparation des joncs,1993-11-11,1,"['83.120','59.100.10']",ISO/TC 61/SC 13,9599,[9012],[31284],"['en','fr']",5,"<p>Provides general information and specifies a method for preparing specimens (rods) intended to be used for tests specified in the other parts of ISO 3597. The preparation of rods includes the manufacture and division of rods into specimens of given leng

9012,IS,,ISO 3597:1977,Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of flexural (cross-breaking) strength,Plastiques renforcés au verre textile — Composites sous forme de joncs à base de stratifils — Détermination de la résistance à la flexion,1977-12-01,1,['83.120'],ISO/TC 61/SC 13,9599,,"[9014,9015,9016,9013]","['en','fr']",3,

9014,IS,,ISO 3597-2:1993,Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength,Plastiques renforcés verre textile — Détermination des propriétés mécaniques sur joncs de stratifils — Partie 2: Détermination de la résistance en flexion,1993-11-11,1,"['83.120','59.100.10']",ISO/TC 61/SC 13,9599,[9012],[31285],"['en','fr']",3,<p>Specifies a test method for determining the flexural strength of composite rods of circular cross-section made of roving-reinforced resin. It may be carried out on as-made rods or on rods that have been pretreated by immersion in boiling water for a specified time an

9015,IS,,ISO 3597-3:1993,Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength,Plastiques renforcés verre textile — Détermination des propriétés mécaniques sur joncs de stratifils — Partie 3: Détermination de la résistance en compression,1993-11-11,1,"['83.120','59.100.10']",ISO/TC 61/SC 13,9599,"[9033,9012]",[31286],"['en','fr']",4,<p>Specifies a test method for determining the compressive strength of composite rods of circular cross-section made of roving-reinforced resin. It may be carried out on as-made rods or on rods that have been pretreated by immersion in boiling water for a

9016,IS,,ISO 3597-4:1993,Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength,Plastiques renforcés verre textile — Détermination des propriétés mécaniques sur joncs de stratifils — Partie 4: Détermination de la résistance en cisaillement interlaminaire apparente,1993-11-11,1,"['83.120','59.100.10']",ISO/TC 61/SC 13,9599,[9012],[31287],"['en','fr']",3,<p>Specifies a test method for determining the apparent interlaminar shear strength of composite rods of circular cross-section made of roving-reinforced resin. It may be carried out on as-made rods or on rods that have b

9017,IS,,ISO 3598:1976,Textile glass yarns — Basis for a specification,Fils à base de verre textile — Base de spécification,1976-08-01,1,['59.100.10'],ISO/TC 61,9599,,[9018],"['en','fr']",2,

9018,IS,,ISO 3598:1986,Textile glass — Yarns — Basis for a specification,Verre textile — Fils — Base de spécification,1986-06-12,2,['59.100.10'],ISO/TC 61/SC 13,9599,[9017],[55461],"['en','fr']",3,"<p>Provides a basis for the establishment of technical specifications for textile glass yarns (strands, slivers, single yarns, folded yarns and cable yarns) such specifications shall contain the following items: designation, sampling, type of glass, type of size, linear density, size content, twist, moisture content, breaking strength, permissible faults, delivery and storage conditions.</p>"

9019,IS,,ISO 3599:1976,"Vernier callipers reading to 0,1 and 0,05 mm",Pieds à coulisse à vernier au 1/10 et au 1/20 mm,1976-06-01,1,['17.040.30'],ISO/TC 213,9599,,"[42799,32398,42801]","['en','fr']",4,"<p>Specifies the most important dimensional, functional and quality characteristics for devices with a maximum range of 1000 mm. Methods for testing the accuracy of the instruments are given in an informative annex. Contains two tables with dimensions and measuring uncertainties, and five figures with details of the instrument.</p>"

3666,IS,,ISO 36:1985,"Rubber, vulcanized — Determination of adhesion to textile fabric",Caoutchouc vulcanisé — Détermination de l'adhérence aux textiles,1985-12-12,1,['83.060'],ISO/TC 45/SC 2,9599,[3665],[3667],"['en','fr']",3,

3667,IS,,ISO 36:1993,"Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabric",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence aux tissus,1993-09-16,2,['83.060'],ISO/TC 45/SC 2,9599,[3666],[28592],"['en','fr']",3,

28592,IS,,ISO 36:1999,"Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabric",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence aux tissus,1999-11-25,3,"['83.060','59.080.40']",ISO/TC 45/SC 2,9599,[3667],[41454],"['en','fr']",4,

41454,IS,,ISO 36:2005,"Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence aux tissus,2005-10-10,4,"['83.060','59.080.40']",ISO/TC 45/SC 2,9599,[28592],[53022],"['en','fr']",4,"<p>ISO 36:2005 specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together.</p><p>The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply su

53022,IS,,ISO 36:2011,"Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence aux textiles,2011-09-05,5,"['83.060','59.080.40']",ISO/TC 45/SC 2,9599,[41454],[72773],"['en','fr','ru']",7,"<p>ISO 36:2011 specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together.</p><p>The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the

72773,IS,,ISO 36:2017,"Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence aux textiles,2017-05-29,6,"['83.060','59.080.40']",ISO/TC 45/SC 2,9599,[53022],[74942],"['en','fr']",8,"<p>ISO 36:2017 specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together.</p><p>The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply

4326,IS,,ISO 360:1975,Cinematography — Recording and reproducing head gaps for four magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions,Cinématographie — Entrefers de têtes d'enregistrement et de lecture du son pour quatre pistes magnétiques sur film cinématographique de 35 mm sans image — Emplacement et largeurs,1975-05-01,1,['37.060.20'],ISO/TC 36,9599,,[3996],"['en','fr']",1,

9020,IS,,ISO 3600:1981,Tractors and machinery for agriculture and forestry — Operator manuals and technical publications — Presentation,Tracteurs et matériels agricoles et forestiers — Manuels d'utilisation et documents techniques — Présentation,1981-08-01,2,['65.060.01'],ISO/TC 23/SC 14,9599,,[9021],"['en','fr']",3,

9021,IS,,ISO 3600:1996,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and presentation","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Manuels d'utilisation — Contenu et présentation",1996-08-29,3,['65.060.01'],ISO/TC 23/SC 14,9599,[9020],[62045],"['en','fr']",16,"<p>Gives guidance for the content and presentation of operator's manuals for tractors, machinery for agriculture and forestry, and powered lawn and garden equipment. Replaces the second edition.</p>"

62045,IS,,ISO 3600:2015,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format","Tracteurs, matériels agricoles et forestiers, matériel à moteur pour jardins et pelouses — Manuels d'utilisation — Contenu et présentation",2015-07-13,4,['65.060.01'],ISO/TC 23/SC 14,9599,[9021],[80604],"['en','fr']",9,"<p>ISO 3600:2015 specifies the content and gives guidance on the format of operator's manuals for tractors, machinery for agriculture and forestry, and powered lawn and garden equipment. It is intended to assist manufacturers of the machinery in the drafting and presentation of these manuals. Manuals intended for use by a ser

9022,IS,,ISO 3601-1:1978,"Fluid systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and size identification code","Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 1: Diamètres intérieurs, sections, tolérances et code d'identification dimensionnel",1978-08-01,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[9023],"['en','fr']",3,

9023,IS,,ISO 3601-1:1988,"Fluid systems — Sealing devices — O-rings — Part 1: Inside diameters, cross-sections, tolerances and size identification code","Systèmes de fluides — Joints d'étanchéité — Joints toriques — Partie 1: Diamètres intérieurs, sections, tolérances et code d'identification dimensionnelle",1988-12-29,2,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,[9022],[22127],"['en','fr']",4,"<p>The dimensions and tolerances specified in this part of ISO 3601 are suitable for any elastomeric material provided the suitable tooling is available. The figure shows the typical O-ring configuration. Table 2 contains the series G (general purpose applications), and table 3 the series A (aer

22127,IS,,ISO 3601-1:2002,"Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and size identification code","Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 1: Diamètres intérieurs, sections, tolérances et code d'identification dimensionnelle",2002-08-22,3,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,[9023],[42113],"['en','fr']",7,"<p>ISO 3601-1 specifies the inside diameters, cross-sections, tolerances and size identification code for O-rings used in fluid power systems for general purpose applications (series G), as well as for aerospace and similar applications (series A).</p><p>The dimensions and tolerances specified in ISO 3601

42113,IS,,ISO 3601-1:2008,"Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes","Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 1: Diamètres intérieurs, sections, tolérances et codes d'identification dimensionnelle",2008-06-26,4,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,[22127],[58043],"['en','fr']",36,"<p>ISO 3601-1:2008 specifies the inside diameters, cross-sections, tolerances and designation codes for O-rings used in fluid power systems for general industrial and aerospace applications.</p><p>The dimensions and tolerances specified in ISO 3601-1:2008 are suitable for any elastomeric material, provided th

54810,IS,Cor,ISO 3601-1:2008/Cor 1:2009,"Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes — Technical Corrigendum 1","Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 1: Diamètres intérieurs, sections, tolérances et codes d'identification dimensionnelle — Rectificatif technique 1",2009-07-13,4,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[58043],"['en','fr']",1,

55510,IS,Cor,ISO 3601-1:2008/Cor 2:2009,"Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes — Technical Corrigendum 2","Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 1: Diamètres intérieurs, sections, tolérances et codes d'identification dimensionnelle — Rectificatif technique 2",2009-11-05,4,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[58043],"['en','fr']",2,

42054,IS,,ISO 3601-2:2008,Fluid power systems — O-rings — Part 2: Housing dimensions for general applications,Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 2: Dimensions des logements pour applications générales,2008-06-03,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[69880],"['en','fr']",44,"<p>ISO 3601-2:2008 specifies the housing (gland) dimensions for class A O-rings for general industrial applications conforming to ISO 3601-1, as well as housing dimensions for class B O-rings used on selected metric-dimensioned hardware, e.g. fluid power cylinder bores and piston rods. These O-rings are for use in general hydraulic and pneumatic applications without and wi

69880,IS,,ISO 3601-2:2016,Fluid power systems — O-rings — Part 2: Housing dimensions for general applications,Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 2: Dimensions des logements pour applications générales,2016-07-19,2,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,[42054],"[85921,85611,79684]","['en','fr']",54,"<p>ISO 3601-2:2016 specifies the housing (gland) dimensions for class A O-rings for general industrial applications conforming to ISO 3601-1, as well as housing dimensions for class B O-rings used on selected metric-dimensioned hardware, e.g. fluid power cylinder bores and piston rods. These O-rings are for use in general hydraulic and pneumatic applic

9025,IS,,ISO 3601-3:1987,Fluid systems — Sealing devices — O-rings — Part 3: Quality acceptance criteria,Systèmes de fluides — Joints d'étanchéité — Joints toriques — Partie 3: Critères de qualité,1987-12-10,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,"[40409,22649]","['en','fr']",7,"<p>This part of ISO 3601 defines and classifies surface imperfections on O-rings and specifies maximum acceptable limits for these imperfections, and it is also applicable to O-rings to be used in aerospace construction. Gives quality grades and definitions, and the table contains categories of surface imperfections together with schematic illustrations of these imperfections. An annex gives examples of

31580,IS,,ISO 3601-5:2002,Fluid power systems — O-rings — Part 5: Suitability of elastomeric materials for industrial applications,Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 5: Matériaux élastomères convenant pour applications industrielles,2002-07-04,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,"[62902,51605]","['en','fr']",4,"<p>ISO 3601-5 evaluates the suitability of a number of elastomeric materials (rubber) which may be used for O-rings in industrial applications. It also indicates the ability of the materials to satisfy many of the requirements associated with fluid power components and systems and includes temperatures and fluid compatibility. Only ma

9032,IS,,ISO 3605:1978,Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of compressive strength,Plastiques renforcés au verre textile — Composites sous forme de joncs à base de stratifils — Détermination de la résistance à la compression,1978-02-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[9033],"['en','fr']",3,

9033,IS,,ISO 3605:1987,Textile glass — Rovings — Determination of compressive strength of rod composites,Verre textile — Stratifils — Détermination de la résistance à la compression sur joncs,1987-05-07,2,['59.100.10'],ISO/TC 61/SC 13,9599,[9032],[9015],['en'],6,

9034,IS,,ISO 3606:1976,Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on outside diameters and wall thicknesses,Tubes en polychlorure de vinyle (PVC) non plastifié — Tolérances sur le diamètre extérieur et l'épaisseur de paroi,1976-11-01,1,['23.040.20'],ISO/TC 138,9599,"[5740,5901]","[9035,21186]","['en','fr']",2,

9036,IS,,ISO 3607:1977,Polyethylene (PE) pipes — Tolerances on outside diameters and wall thicknesses,Tubes en polyéthylène (PE) — Tolérances sur le diamètre extérieur et l'épaisseur de paroi,1977-12-01,1,['23.040.20'],ISO/TC 138,9599,"[5739,5741]","[9035,21186]","['en','fr']",1,

9039,IS,,ISO 3608:1976,Chlorinated polyvinyl chloride (CPVC) pipes — Tolerances on outside diameters and wall thicknesses,Tubes en polychlorure de vinyle chloré (PVC-C) — Tolérances sur le diamètre extérieur et l'épaisseur de paroi,1976-11-01,3,['23.040.20'],ISO/TC 138,9599,,"[9035,21186]","['en','fr']",2,

9040,IS,,ISO 3609:1977,Polypropylene (PP) pipes — Tolerances on outside diameters and wall thicknesses,Tubes en polypropylène (PP) — Tolérances sur le diamètre extérieur et l'épaisseur de paroi,1977-12-01,1,['23.040.20'],ISO/TC 138,9599,,"[9035,21186]","['en','fr']",1,

9043,IS,,ISO 3611:1978,Micrometer callipers for external measurement,Micromètres d'extérieur,1978-02-01,1,['17.040.30'],ISO/TC 213,9599,,[45454],"['en','fr']",6,"<p>Specifies the most importent dimensional, functional and quality characteristics for measurements. Table 1 covers parameters for the measuring ranges from 0 mm up to and including 500 mm which are devided in steps of 25 mm each. Annex A refers to measurement errors within the measuring range; annex B contains instruction for application; annex C includes recommendations for testing.</p>"

45454,IS,,ISO 3611:2010,Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics,Spécification géométrique des produits (GPS) — Équipement de mesurage dimensionnel: Micromètres d'extérieur — Caractéristiques de conception et caractéristiques métrologiques,2010-10-19,2,['17.040.30'],ISO/TC 213,9599,[9043],[77951],"['en','fr']",18,<p>ISO 3611:2010 specifies the most important design and metrological characteristics of micrometers for external measurements:</p><ul><li>with analogue indication;</li><li>with digital indication: mechanical or electronic digital display.</li></ul>

9045,IS,,ISO 3613:1980,Chromate conversion coatings on zinc and cadmium — Test methods,Couches de conversion au chromate sur zinc et cadmium — Méthodes d'essai,1980-09-01,1,['25.220.20'],ISO/TC 107,9599,,"[32967,9046]","['en','fr']",4,

32967,IS,,ISO 3613:2000,"Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods","Couches de conversion au chromate sur zinc, cadmium et alliages d'aluminium-zinc et de zinc-aluminium — Méthodes d'essai",2000-06-15,2,['25.220.20'],ISO/TC 107,9599,[9045],[53003],"['en','fr']",7,

53003,IS,,ISO 3613:2010,"Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods","Revêtements métalliques et autres revêtements inorganiques — Couches de conversion au chromate sur zinc, cadmium et alliages d'aluminium-zinc et de zinc-aluminium — Méthodes d'essai",2010-12-03,3,['25.220.20'],ISO/TC 107,9599,[32967],"[78211,63221]","['en','fr']",9,"<p>ISO 3513:2010 specifies methods for the determination of the presence of colourless chromate conversion coatings, presence of hexavalent chromium in colourless and coloured coatings on zinc or cadmium or aluminium-zinc (mass fraction of aluminium: 55 %,

9048,IS,,ISO 3615:1976,Magnetic tape for instrumentation applications — Standardization of analogue modes of recording,Bande magnétique pour l'enregistrement de mesures — Normalisation des modes d'enregistrement analogique,1976-02-01,1,['35.220.22'],ISO/IEC JTC 1,9599,,[12269],"['en','fr']",8,

9049,IS,,ISO 3616:1977,"Textile glass — Mats — Determination of average thickness, thickness under load and recovery after compression","Verre textile — Mats — Détermination de l'épaisseur moyenne, de l'épaisseur sous charge et de la recouvrance après compression",1977-12-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[33314],"['en','fr']",4,

33314,IS,,ISO 3616:2001,"Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression","Verre textile — Mats à fils coupés et mats à fils continus — Détermination de l'épaisseur moyenne, de l'épaisseur sous charge et de la recouvrance après compression",2001-04-19,2,['59.100.10'],ISO/TC 61/SC 13,9599,[9049],[84298],"['en','fr']",6,

67732,IS,Amd,ISO 3616:2001/Amd 1:2017,"Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression — Amendment 1","Verre textile — Mats à fils coupés et mats à fils continus — Détermination de l'épaisseur moyenne, de l'épaisseur sous charge et de la recouvrance après compression — Amendement 1",2017-08-14,2,['59.100.10'],ISO/TC 61/SC 13,9599,,[84298],['en'],1,

9050,IS,,ISO 3617:1976,Photographic grade sodium hydroxide — Specification,Hydroxyde de sodium de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20282],"['en','fr']",5,

9051,IS,,ISO 3618:1976,Photographic grade benzotriazole — Specification,Benzotriazole de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20284],"['en','fr']",4,

9052,IS,,ISO 3619:1976,Photographic grade ammonium thiosulphate solution — Specification,Thiosulfate d'ammonium en solution de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20060],"['en','fr']",5,

42210,IS,,ISO 362-1:2007,Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories,Mesurage du bruit émis par les véhicules routiers en accélération — Méthode d'expertise — Partie 1: Catégories M et N,2007-06-22,1,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,"[25971,21249]",[59760],"['en','ru']",55,"<p>ISO 362-1:2007 specifies an engineering method for measuring the noise emitted by road vehicles of categories M and N under typical urban traffic conditions. It excludes vehicles of category L1 and L2, which are covered by ISO 9645, and vehicles of category L3, L4 and L5 covered by ISO 362-2.</p><p>The specifications are intended to reproduce

54275,IS,Cor,ISO 362-1:2007/Cor 1:2009,Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories — Technical Corrigendum 1,Mesurage du bruit émis par les véhicules routiers en accélération — Méthode d'expertise — Partie 1: Catégories M et N — Rectificatif technique 1,2009-04-24,1,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,,[59760],['en'],2,

59760,IS,,ISO 362-1:2015,Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories,Mesurage du bruit émis par les véhicules routiers en accélération — Méthode d'expertise — Partie 1: Catégories M et N,2015-01-08,2,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,"[42210,54275]",[80872],"['en','fr']",66,"<p>ISO 362-1:2015 specifies an engineering method for measuring the noise emitted by road vehicles of categories M and N under typical urban traffic conditions. It excludes vehicles of category L1 and L2, which are covered by ISO 9645, and vehicles of category L3, L4, and L5, which are covered by ISO 362‑2.</p><p>The specifications are intended t

4329,IS,,ISO 362:1981,Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method,Acoustique — Mesurage du bruit émis par les véhicules routiers en accélération — Méthode d'expertise,1981-10-01,1,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,[4328],[21248],"['en','fr']",4,

4330,IS,Amd,ISO 362:1981/Amd 1:1985,Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method — Amendment 1,Acoustique — Mesurage du bruit émis par les véhicules routiers en accélération — Méthode d'expertise — Amendement 1,1985-10-31,1,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,,[21248],['en'],1,

21248,IS,,ISO 362:1994,Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method,Acoustique — Mesurage du bruit émis par les véhicules routiers en accélération — Méthode d'expertise,1994-12-01,2,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,"[4329,4330]",[25971],"['en','fr']",5,

25971,IS,,ISO 362:1998,Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method,Acoustique — Mesurage du bruit émis par les véhicules routiers en accélération — Méthode d'expertise,1998-06-04,3,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,[21248],"[42210,42211,32307]",['en'],12,

56020,IS,,ISO 362-3:2016,Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories,Mesurage du bruit émis par les véhicules routiers en accélération — Méthode d'expertise — Partie 3: Essais à l'intérieur de catégories M et N,2016-06-30,1,['17.140.30'],ISO/TC 43/SC 1,9599,,[81033],"['en','fr']",51,"<p>ISO 362-3:2016 specifies an engineering method for measuring the noise emitted by road vehicles of categories M and N by using a semi anechoic chamber.</p><p>The specifications are intended to achieve an acoustical correlation between testing the exterior noise of road vehicles in a semi anechoic chamber and outdoor testing as des

9053,IS,,ISO 3620:1976,Photographic grade aluminium potassium sulphate dodecahydrate — Specification,Sulfate double d'aluminium et de potassium dodécahydraté de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20283],"['en','fr']",3,

9054,IS,,ISO 3621:1976,"Photographic grade sodium tetraborate, decahydrate — Specification",Tétraborate de sodium décahydraté de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20062],"['en','fr']",4,

9055,IS,,ISO 3622:1976,Photographic grade ammonium thiocyanate — Specification,Thiocyanate d'ammonium de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20063],"['en','fr']",5,

9056,IS,,ISO 3623:1976,"Photographic grade potassium carbonate, anhydrous — Specification",Carbonate de potassium anhydre de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20287],"['en','fr']",6,

9057,IS,,ISO 3624:1976,Photographic grade potassium ferricyanide — Specification,Ferricyanure de potassium de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20288],"['en','fr']",2,

9058,IS,,ISO 3625:1976,Photographic grade potassium hydroxide — Specification,Hydroxyde de potassium de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[9059],"['en','fr']",5,

9060,IS,,ISO 3626:1976,Photographic grade potassium thiocyanate — Specification,Thiocyanate de potassium de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20064],"['en','fr']",5,

9061,IS,,ISO 3627:1976,"Photographic grade sodium metabisulphite, anhydrous — Specification",Métadisulfite de sodium anhydre de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20065],"['en','fr']",4,

20065,IS,,ISO 3627:1994,Photography — Processing chemicals — Specifications for anhydrous sodium metabisulfite,Photographie — Produits chimiques de traitement — Spécifications pour le métadisulfite de sodium anhydre,1994-10-13,2,['37.040.30'],ISO/TC 42,9599,[9061],[33088],['en'],5,<p>Cancels and replaces the first edition (1976). Establishes criteria for the purity of photographic-grade anhydrous sodium metabisulfite and describes the tests to be used to determine the purity.</p>

9062,IS,,ISO 3628:1976,Photographic grade boric acid — Specification,Acide borique de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[9063],"['en','fr']",3,

9064,IS,,ISO 3629:1976,Photographic grade potassium metabisulphite — Specification,Métadisulfite de potassium de qualité photographique — Spécifications,1976-05-01,1,['37.040.30'],ISO/TC 42,9599,,[20066],"['en','fr']",4,

20066,IS,,ISO 3629:1996,Photography — Processing chemicals — Specifications for potassium metabisulfite,Photographie — Produits chimiques de traitement — Spécifications pour le potassium métabisulfite,1996-10-17,2,['37.040.30'],ISO/TC 42,9599,[9064],[33089],['en'],6,

4331,IS,,ISO 363:1976,Textile machinery and accessories — Flat steel healds for general use — Dimensions,Matériel pour l'industrie textile — Lisses plates en acier d'usage général — Dimensions,1976-10-01,1,['59.120.30'],ISO/TC 72,9599,,[4332],"['en','fr']",2,

4332,IS,,ISO 363:1992,Textile machinery and accessories — Flat steel healds with closed end loops — Dimensions,Matériel pour l'industrie textile — Lisses en acier plat avec boucles d'extrémités fermées — Dimensions,1992-03-25,2,['59.120.30'],ISO/TC 72/SC 3,9599,[4331],[43477],"['en','fr']",2,"<p>Tabulates the cross-section of healds from 2 mm x 0,25 mm to 2,8 mm x 0,4 mm together with the relevant dimensions of thread eyes and the distances inside end loops.</p>"

9066,IS,,ISO 3630-1:1992,"Dental root-canal instruments — Part 1: Files, reamers, barbed broaches, rasps, paste carriers, explorers and cotton broaches","Instruments pour canaux radiculaires utilisés en art dentaire — Partie 1: Limes, alésoirs, broches barbelées, râpes, bourre-pâtes, sondes exploratrices et broches porte-coton",1992-12-17,1,['11.060.20'],ISO/TC 106/SC 4,9599,[9065],[37702],"['en','fr']",19,"<p>It covers significant features of hand- and power-operated dental root canal instruments which are used by the dentist for the mechanical preparation of root canal for treatment. General specifications, requirements and test methods are noticed.</p>"

37702,IS,,ISO 3630-1:2008,Dentistry — Root-canal instruments — Part 1: General requirements and test methods,Art dentaire — Instruments pour canaux radiculaires — Partie 1: Exigences générales et méthodes d'essai,2008-01-15,2,['11.060.20'],ISO/TC 106/SC 4,9599,[9066],"[66969,75260]","['en','fr']",18,"<p>ISO 3630-1:2008 specifies general requirements and test methods for root-canal instruments used for endodontic purposes, e.g. enlargers, shaping and cleaning instruments, condensers, and accessory instruments. In addition it covers general size designations, colour coding, packaging and identification symbols.</p>"

9065,IS,,ISO 3630:1984,Dental root canal instruments,Instruments pour canaux radiculaires utilisés en art dentaire,1984-02-01,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[9066],"['en','fr']",16,

9067,IS,,ISO 3630-2:1986,Dental root canal instruments — Part 2: Enlargers,Instruments pour canaux radiculaires utilisés en art dentaire — Partie 2: Élargisseurs,1986-05-01,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[19991],"['en','fr']",5,

19991,IS,,ISO 3630-2:2000,Dental root-canal instruments — Part 2: Enlargers,Instruments pour canaux radiculaires utilisés en art dentaire — Partie 2: Élargisseurs,2000-11-30,2,['11.060.20'],ISO/TC 106/SC 4,9599,[9067],[51957],"['en','fr']",15,

51957,IS,,ISO 3630-2:2013,Dentistry — Endodontic instruments — Part 2: Enlargers,Médecine bucco-dentaire — Instruments d'endodontie — Partie 2: Élargisseurs,2013-04-12,3,['11.060.20'],ISO/TC 106/SC 4,9599,[19991],[76998],"['en','fr']",15,"<p>ISO 3630-2:2013 specifies requirements for enlargers not cited in ISO 3630-1, ISO 3630-3, ISO 3630-4 or ISO 3630-5.</p><p>ISO 3630-2:2013 specifies requirements for size, marking, product designation, safety considerations, and their labelling and packaging, including the instructions for use.</p>"

9068,IS,,ISO 3630-3:1994,"Dental root-canal instruments — Part 3: Condensers, pluggers and spreaders","Instruments pour canaux radiculaires utilisés en art dentaire — Partie 3: Condenseurs, axial et latéral",1994-03-03,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[59564],"['en','fr']",8,"<p>Specifies requirements and test methods for pluggers and spreaders, used to condense root-canal filling materials. Includes, additional to standard sizes, a secondary size system referred to as 'taper size'. These 'taper size' sizes are identifiable by tapers which vary with instrument size.</p>"

59564,IS,,ISO 3630-3:2015,Dentistry — Endodontic instruments — Part 3: Compactors: pluggers and spreaders,Médecine bucco-dentaire — Instruments d'endodontie — Partie 3: Compacteurs axiaux et latéraux,2015-08-19,2,['11.060.20'],ISO/TC 106/SC 4,9599,[9068],[76999],"['en','fr']",10,"<p>ISO 3630-3:2015 specifies requirements and test methods for endodontic instruments used as pluggers and spreaders, used to compact endodontic filling materials not cited in ISO 3630‑1, ISO 3630‑2, ISO 3630‑4, or ISO 3630‑5.</p><p>ISO 3630-3:2015 specifies requirements for size, marking, product designation, safety considerations, and their labelling and packaging.</p>"

43204,IS,,ISO 3630-4:2009,Dentistry — Root canal instruments — Part 4: Auxiliary instruments,Art dentaire — Instruments pour canaux radiculaires — Partie 4: Instruments auxiliaires,2009-06-24,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[77000],"['en','fr']",11,"<p>ISO 3630-4:2009 specifies requirements and test methods for hand-held or mechanically operated instruments for performing root canal procedures not cited in ISO 3630-1, 3630-2, 3630-3 or 3630-5.</p><p>ISO 3630-4:2009 specifies requirements for size, product designation, safety considerations, instructions and labelling.</p>"

51954,IS,,ISO 3630-5:2011,Dentistry — Endodontic instruments — Part 5: Shaping and cleaning instruments,Médecine bucco-dentaire — Instruments d'endodontie — Partie 5: Instruments de mise en forme et de nettoyage,2011-09-22,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[77820],"['en','fr']",8,

9069,IS,,ISO 3631:1978,Citrus fruits — Guide to storage,Agrumes — Guide pour l'entreposage,1978-11-01,1,['67.080.10'],ISO/TC 34/SC 3,9599,,[72809],"['en','fr']",9,"<p>The guidance specifies conditions required for good keeping of oranges, mandarins, lemons, grapefruits and limes with or without refrigeration. It includes conditions of harvesting and putting into store, and optimum conditions, such as temperature, relative humidity, air circulation and fresh air change. A table gives recommended temperatures according to varieties and areas of production. Detailed information concerning cultivars is given in annexes A and B. Annex C shows sources of damage.</p>"

9072,IS,,ISO 3632-1:1993,Saffron (Crocus sativus Linnaeus) — Part 1: Specification,Safran (Crocus sativus Linnaeus) — Partie 1: Spécifications,1993-12-23,1,['67.220.10'],ISO/TC 34/SC 7,9599,[9071],"[31321,39213]","['en','fr']",6,"<p>Specifies the requirements for saffron obtained from the flowers of Crocus sativus Linnaeus. Is applicable to saffron in either of the following forms: in whole filaments as a loose, supple, elastic and hygroscopic mass of filaments, or in powder form.</p>"

44523,IS,,ISO 3632-1:2011,Spices — Saffron (Crocus sativus L.) — Part 1: Specification,Épices — Safran (Crocus sativus L.) — Partie 1: Spécifications,2011-08-26,2,['67.220.10'],ISO/TC 34/SC 7,9599,[39213],[86798],"['en','ru']",8,<p>ISO 3632-1:2011 establishes specifications for dried saffron obtained from the pistils of<i> Crocus sativus </i>L. flowers.</p><p>It applies to saffron in both of the following forms: a) filaments and cut filaments; b) powder.</p>

9071,IS,,ISO 3632:1980,Saffron — Specification,Safran — Spécifications,1980-10-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,"[9072,9073]","['en','fr']",9,

9073,IS,,ISO 3632-2:1993,Saffron (Crocus sativus Linnaeus) — Part 2: Test methods,Safran (Crocus sativus Linnaeus) — Partie 2: Méthodes d'essai,1993-12-23,1,['67.220.10'],ISO/TC 34/SC 7,9599,[9071],"[31323,39214]","['en','fr']",12,"<p>Describes methods suitable for testing the spice saffron, which is obtained from the flowers of the saffron crocus (Crocus sativus Linnaeus): identification test, determination of floral waste content of saffron in filaments (stigmas or stamens), determination of extraneous matter content of saffron in filaments, microscopic examination of saffron in powder form, determination of moisture and volatile natter content, determination of total ash, determination of

9074,IS,,ISO 3633:1991,Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications,Tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) pour les systèmes d'évacuation d'eaux usées et d'eaux-vannes (à basse et à haute température) à l'intérieur des bâtiments — Spécifications,1991-05-30,1,"['91.140.80','83.140.30']",ISO/TC 138/SC 1,9599,,[25662],"['en','fr']",17,

9076,IS,,ISO 3635:1981,Size designation of clothes — Definitions and body measurement procedure,Désignation des tailles de vêtements — Définitions et procédés de mesurage du corps,1981-08-01,3,['61.020'],ISO/TC 133,9599,,"[61763,61686]","['en','fr']",5,<p>Is intended as a reference document to be consulted in conjunction with the ISO-Standard for the size designation of clothes applicable to the garment under consideration. Defines body dimensions and describes their measurement.</p>

9078,IS,,ISO 3636:1977,Size designation of clothes — Men's and boys' outerwear garments,Désignation des tailles de vêtements — Vêtements de dessus pour hommes et garçons,1977-11-01,1,['61.020'],ISO/TC 133,9599,,[64075],"['en','fr']",5,"<p>Establishes a system of designating the sizes of garments (including knitwear and swimwear) that are classified as a) covering the upper or the whole body or b) covering the lower body only, and applies to civilian and uniform garments. Both the control dimensions on which the size designation system is based, and the method of indicating the size designation on a garment label, are laid down. Should be read in conjunction with ISO 3635.</p>"

9079,IS,Cor,ISO 3636:1977/Cor 1:1990,Size designation of clothes — Men's and boys' outerwear garments — Technical Corrigendum 1,Désignation des tailles de vêtements — Vêtements de dessus pour hommes et garçons — Rectificatif technique 1,1990-10-12,1,['61.020'],ISO/TC 133,9599,,[64075],"['en','fr']",3,

9080,IS,,ISO 3637:1977,Size designation of clothes — Women's and girls' outerwear garments,Désignation des tailles de vêtements — Vêtements de dessus pour femmes et filles,1977-11-01,1,['61.020'],ISO/TC 133,9599,,[64075],"['en','fr']",5,"<p>Establishes a system of designating the sizes of garments (including knitwear and swimwear) that are classified as a) covering the upper or the whole body or b) covering the lower body only, and applies to civilian and uniform garments. Both the control dimensions on which the size designation system is based, and the method of indicating the size designation on a garment label, are laid down. Should be read in conjunction with ISO 3635.</p>"

9081,IS,Cor,ISO 3637:1977/Cor 1:1990,Size designation of clothes — Women's and girls' outerwear garments — Technical Corrigendum 1,Désignation des tailles de vêtements — Vêtements de dessus pour femmes et filles — Rectificatif technique 1,1990-10-04,1,['61.020'],ISO/TC 133,9599,,[64075],"['en','fr']",3,