SAE J1453 (ORFS)
For SAE J1453 (ORFS), governing standard is SAE J1453; region of origin is American Connections; thread type (tapered or parallel) is straight thread; seat or flare angle is flat face; seal method is The male connector has a straight thread and an O-ring in the face. The female has a straight thread and a machined flat face. The seal takes place by compressing the O-ring onto the flat face of the female, similar to the split flange type fitting, recorded from its source on 2026-08-13.
- Connection type
- SAE J1453 (ORFS) verified
- Governing standard
- SAE J1453 verified
- Region of origin
- American Connections our reading
- Thread type (tapered or parallel)
- straight thread verified
- Seat or flare angle
- flat face verified
- Seal method
- The male connector has a straight thread and an O-ring in the face. The female has a straight thread and a machined flat face. The seal takes place by compressing the O-ring onto the flat face of the female, similar to the split flange type fitting. verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
SAE J1453 (ORFS) O-ring Face Seal connections are considered the best for leak control. The male connector has a straight thread and an O-ring in the face. The female has a straight thread and a machined flat face. The seal takes place by compressing the O-ring onto the flat face of the female, similar to the split flange type fitting. The threads maintain the connection mechanically.
— brennaninc.com, retrieved 2026-08-13
Source
- brennaninc.comhttps://brennaninc.com/connection-types/