Reference Source

DOT-3AL Cylinders Made of Aluminum Alloy 6351-T6 · Eddy current examination combined with visual inspection

For DOT-3AL Cylinders Made of Aluminum Alloy 6351-T6, test or inspection is Eddy current examination combined with visual inspection; interval is 5; regulation section is 49 CFR § 180.209, recorded from its source on 2026-08-06; source re-checked 2026-10-05.

Container specification
DOT-3AL Cylinders Made of Aluminum Alloy 6351-T6 verified
Test or inspection
Eddy current examination combined with visual inspection our reading
Interval
5 verified
Regulation section
49 CFR § 180.209
Sourcelaw.cornell.edu
Verified
Review by
DatasetHow often hazmat cylinders, cargo tanks, IBCs and portable tanks must be retested

Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.

What the source says

Eddy current examination combined with visual inspection | Eddy current—In accordance with Appendix C of this part Visual inspection—In accordance with CGA Pamphlet C-6.1 (IBR; see § 171.7 of this subchapter) | Any crack in the neck or shoulder of 2 thread lengths or more | 5

— law.cornell.edu, retrieved 2026-08-06

Where each value comes from

The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.

Container specification

Table 4 to Paragraph (m)—Requalification and Inspection of DOT-3AL Cylinders Made of Aluminum Alloy 6351-T6

— all from law.cornell.edu, retrieved 2026-08-06

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.