DIN 125
For DIN 125, iso standard is ISO 7089, 7090; part is Washer, Plain; interchangeability verdict is Fully interchangeable, verified against its source on 2026-08-05.
- DIN standard
- DIN 125 verified
- ISO standard
- ISO 7089, 7090 verified
- Part
- Washer, Plain verified
- Interchangeability verdict
- Fully interchangeable verified
What the source says
Washer, Plain | DIN 125 | ISO 7089, 7090 | Fully interchangeable | Normal vs chamfered faces.
— monsterbolts.com, retrieved 2026-08-05
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
ISO standard
monsterbolts.com says iso standard is ISO 7089, 7090, as of 2026-08-05.
Washer, Plain | DIN 125 | ISO 7089, 7090 | Fully interchangeable | Normal vs chamfered faces.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says iso standard is ISO 7089, as of 2026-08-05.
DIN 125 | ISO 7089 | | Washers; medium type, primarily for hexagon bolts |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Part
monsterbolts.com says part is Washer, Plain, as of 2026-08-05.
Washer, Plain | DIN 125 | ISO 7089, 7090 | Fully interchangeable | Normal vs chamfered faces.
https://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
trfastenings.com says part is Washers; medium type, primarily for hexagon bolts, as of 2026-08-05.
DIN 125 | ISO 7089 | | Washers; medium type, primarily for hexagon bolts |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- monsterbolts.comhttps://monsterbolts.com/pages/common-din-numbers-for-metric-fasteners
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards